This is the mail archive of the gcc-patches@gcc.gnu.org mailing list for the GCC project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: PATCH COMMITTED: Add sha1 to libiberty


Ian Lance Taylor <iant@google.com> writes:

> "Andrew Pinski" <pinskia@gmail.com> writes:
>
>> On Mon, Mar 24, 2008 at 4:52 PM, Ian Lance Taylor <iant@google.com> wrote:
>>> I plan to shortly commit this patch to add sha1 to libiberty.  I'm
>>>  doing this for the GNU binutils, in order to use sha1 in gold.
>>>  Currently ld has its copy of sha1.h and sha1.c; putting it in
>>>  libiberty will permit ld and gold to share it.
>>
>> This also has the same issue as the md5.h patch:
>> +#ifdef __cplusplus
>> +extern "C" {
>> +#endif
>> +
>> +# include <stdio.h>
>
> Yes, thanks.
>
> I also see that md5.h has a different way of getting a 32-bit unsigned
> type, so I'm going to copy that.

Committed like this after another bootstrap.

Ian


include/ChangeLog:
2008-03-24  Ian Lance Taylor  <iant@google.com>

	* sha1.h: New file, from gnulib.

libiberty/ChangeLog:
2008-03-24  Ian Lance Taylor  <iant@google.com>

	* sha1.c: New file, from gnulib.
	* Makefile.in: Rebuild dependencies.
	(CFILES): Add sha1.c.
	(REQUIRED_OFILES): Add sha1.o.


Index: include/sha1.h
===================================================================
--- include/sha1.h	(revision 0)
+++ include/sha1.h	(revision 0)
@@ -0,0 +1,141 @@
+/* Declarations of functions and data types used for SHA1 sum
+   library functions.
+   Copyright (C) 2000, 2001, 2003, 2005, 2006, 2008
+   Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by the
+   Free Software Foundation; either version 2, or (at your option) any
+   later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
+
+#ifndef SHA1_H
+# define SHA1_H 1
+
+#include <stdio.h>
+
+#if defined HAVE_LIMITS_H || _LIBC
+# include <limits.h>
+#endif
+
+#include "ansidecl.h"
+
+/* The following contortions are an attempt to use the C preprocessor
+   to determine an unsigned integral type that is 32 bits wide.  An
+   alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
+   doing that would require that the configure script compile and *run*
+   the resulting executable.  Locally running cross-compiled executables
+   is usually not possible.  */
+
+#ifdef _LIBC
+# include <sys/types.h>
+typedef u_int32_t sha1_uint32;
+typedef uintptr_t sha1_uintptr;
+#else
+#  define INT_MAX_32_BITS 2147483647
+
+/* If UINT_MAX isn't defined, assume it's a 32-bit type.
+   This should be valid for all systems GNU cares about because
+   that doesn't include 16-bit systems, and only modern systems
+   (that certainly have <limits.h>) have 64+-bit integral types.  */
+
+# ifndef INT_MAX
+#  define INT_MAX INT_MAX_32_BITS
+# endif
+
+# if INT_MAX == INT_MAX_32_BITS
+   typedef unsigned int sha1_uint32;
+# else
+#  if SHRT_MAX == INT_MAX_32_BITS
+    typedef unsigned short sha1_uint32;
+#  else
+#   if LONG_MAX == INT_MAX_32_BITS
+     typedef unsigned long sha1_uint32;
+#   else
+     /* The following line is intended to evoke an error.
+        Using #error is not portable enough.  */
+     "Cannot determine unsigned 32-bit data type."
+#   endif
+#  endif
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Structure to save state of computation between the single steps.  */
+struct sha1_ctx
+{
+  sha1_uint32 A;
+  sha1_uint32 B;
+  sha1_uint32 C;
+  sha1_uint32 D;
+  sha1_uint32 E;
+
+  sha1_uint32 total[2];
+  sha1_uint32 buflen;
+  sha1_uint32 buffer[32];
+};
+
+
+/* Initialize structure containing state of computation. */
+extern void sha1_init_ctx (struct sha1_ctx *ctx);
+
+/* Starting with the result of former calls of this function (or the
+   initialization function update the context for the next LEN bytes
+   starting at BUFFER.
+   It is necessary that LEN is a multiple of 64!!! */
+extern void sha1_process_block (const void *buffer, size_t len,
+				struct sha1_ctx *ctx);
+
+/* Starting with the result of former calls of this function (or the
+   initialization function update the context for the next LEN bytes
+   starting at BUFFER.
+   It is NOT required that LEN is a multiple of 64.  */
+extern void sha1_process_bytes (const void *buffer, size_t len,
+				struct sha1_ctx *ctx);
+
+/* Process the remaining bytes in the buffer and put result from CTX
+   in first 20 bytes following RESBUF.  The result is always in little
+   endian byte order, so that a byte-wise output yields to the wanted
+   ASCII representation of the message digest.
+
+   IMPORTANT: On some systems it is required that RESBUF be correctly
+   aligned for a 32 bits value.  */
+extern void *sha1_finish_ctx (struct sha1_ctx *ctx, void *resbuf);
+
+
+/* Put result from CTX in first 20 bytes following RESBUF.  The result is
+   always in little endian byte order, so that a byte-wise output yields
+   to the wanted ASCII representation of the message digest.
+
+   IMPORTANT: On some systems it is required that RESBUF is correctly
+   aligned for a 32 bits value.  */
+extern void *sha1_read_ctx (const struct sha1_ctx *ctx, void *resbuf);
+
+
+/* Compute SHA1 message digest for bytes read from STREAM.  The
+   resulting message digest number will be written into the 20 bytes
+   beginning at RESBLOCK.  */
+extern int sha1_stream (FILE *stream, void *resblock);
+
+/* Compute SHA1 message digest for LEN bytes beginning at BUFFER.  The
+   result is always in little endian byte order, so that a byte-wise
+   output yields to the wanted ASCII representation of the message
+   digest.  */
+extern void *sha1_buffer (const char *buffer, size_t len, void *resblock);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Index: libiberty/sha1.c
===================================================================
--- libiberty/sha1.c	(revision 0)
+++ libiberty/sha1.c	(revision 0)
@@ -0,0 +1,416 @@
+/* sha1.c - Functions to compute SHA1 message digest of files or
+   memory blocks according to the NIST specification FIPS-180-1.
+
+   Copyright (C) 2000, 2001, 2003, 2004, 2005, 2006, 2008 Free Software
+   Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by the
+   Free Software Foundation; either version 2, or (at your option) any
+   later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software Foundation,
+   Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
+
+/* Written by Scott G. Miller
+   Credits:
+      Robert Klep <robert@ilse.nl>  -- Expansion function fix
+*/
+
+#include <config.h>
+
+#include "sha1.h"
+
+#include <stddef.h>
+#include <string.h>
+
+#if USE_UNLOCKED_IO
+# include "unlocked-io.h"
+#endif
+
+#ifdef WORDS_BIGENDIAN
+# define SWAP(n) (n)
+#else
+# define SWAP(n) \
+    (((n) << 24) | (((n) & 0xff00) << 8) | (((n) >> 8) & 0xff00) | ((n) >> 24))
+#endif
+
+#define BLOCKSIZE 4096
+#if BLOCKSIZE % 64 != 0
+# error "invalid BLOCKSIZE"
+#endif
+
+/* This array contains the bytes used to pad the buffer to the next
+   64-byte boundary.  (RFC 1321, 3.1: Step 1)  */
+static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ...  */ };
+
+
+/* Take a pointer to a 160 bit block of data (five 32 bit ints) and
+   initialize it to the start constants of the SHA1 algorithm.  This
+   must be called before using hash in the call to sha1_hash.  */
+void
+sha1_init_ctx (struct sha1_ctx *ctx)
+{
+  ctx->A = 0x67452301;
+  ctx->B = 0xefcdab89;
+  ctx->C = 0x98badcfe;
+  ctx->D = 0x10325476;
+  ctx->E = 0xc3d2e1f0;
+
+  ctx->total[0] = ctx->total[1] = 0;
+  ctx->buflen = 0;
+}
+
+/* Put result from CTX in first 20 bytes following RESBUF.  The result
+   must be in little endian byte order.
+
+   IMPORTANT: On some systems it is required that RESBUF is correctly
+   aligned for a 32-bit value.  */
+void *
+sha1_read_ctx (const struct sha1_ctx *ctx, void *resbuf)
+{
+  ((sha1_uint32 *) resbuf)[0] = SWAP (ctx->A);
+  ((sha1_uint32 *) resbuf)[1] = SWAP (ctx->B);
+  ((sha1_uint32 *) resbuf)[2] = SWAP (ctx->C);
+  ((sha1_uint32 *) resbuf)[3] = SWAP (ctx->D);
+  ((sha1_uint32 *) resbuf)[4] = SWAP (ctx->E);
+
+  return resbuf;
+}
+
+/* Process the remaining bytes in the internal buffer and the usual
+   prolog according to the standard and write the result to RESBUF.
+
+   IMPORTANT: On some systems it is required that RESBUF is correctly
+   aligned for a 32-bit value.  */
+void *
+sha1_finish_ctx (struct sha1_ctx *ctx, void *resbuf)
+{
+  /* Take yet unprocessed bytes into account.  */
+  sha1_uint32 bytes = ctx->buflen;
+  size_t size = (bytes < 56) ? 64 / 4 : 64 * 2 / 4;
+
+  /* Now count remaining bytes.  */
+  ctx->total[0] += bytes;
+  if (ctx->total[0] < bytes)
+    ++ctx->total[1];
+
+  /* Put the 64-bit file length in *bits* at the end of the buffer.  */
+  ctx->buffer[size - 2] = SWAP ((ctx->total[1] << 3) | (ctx->total[0] >> 29));
+  ctx->buffer[size - 1] = SWAP (ctx->total[0] << 3);
+
+  memcpy (&((char *) ctx->buffer)[bytes], fillbuf, (size - 2) * 4 - bytes);
+
+  /* Process last bytes.  */
+  sha1_process_block (ctx->buffer, size * 4, ctx);
+
+  return sha1_read_ctx (ctx, resbuf);
+}
+
+/* Compute SHA1 message digest for bytes read from STREAM.  The
+   resulting message digest number will be written into the 16 bytes
+   beginning at RESBLOCK.  */
+int
+sha1_stream (FILE *stream, void *resblock)
+{
+  struct sha1_ctx ctx;
+  char buffer[BLOCKSIZE + 72];
+  size_t sum;
+
+  /* Initialize the computation context.  */
+  sha1_init_ctx (&ctx);
+
+  /* Iterate over full file contents.  */
+  while (1)
+    {
+      /* We read the file in blocks of BLOCKSIZE bytes.  One call of the
+	 computation function processes the whole buffer so that with the
+	 next round of the loop another block can be read.  */
+      size_t n;
+      sum = 0;
+
+      /* Read block.  Take care for partial reads.  */
+      while (1)
+	{
+	  n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
+
+	  sum += n;
+
+	  if (sum == BLOCKSIZE)
+	    break;
+
+	  if (n == 0)
+	    {
+	      /* Check for the error flag IFF N == 0, so that we don't
+		 exit the loop after a partial read due to e.g., EAGAIN
+		 or EWOULDBLOCK.  */
+	      if (ferror (stream))
+		return 1;
+	      goto process_partial_block;
+	    }
+
+	  /* We've read at least one byte, so ignore errors.  But always
+	     check for EOF, since feof may be true even though N > 0.
+	     Otherwise, we could end up calling fread after EOF.  */
+	  if (feof (stream))
+	    goto process_partial_block;
+	}
+
+      /* Process buffer with BLOCKSIZE bytes.  Note that
+			BLOCKSIZE % 64 == 0
+       */
+      sha1_process_block (buffer, BLOCKSIZE, &ctx);
+    }
+
+ process_partial_block:;
+
+  /* Process any remaining bytes.  */
+  if (sum > 0)
+    sha1_process_bytes (buffer, sum, &ctx);
+
+  /* Construct result in desired memory.  */
+  sha1_finish_ctx (&ctx, resblock);
+  return 0;
+}
+
+/* Compute SHA1 message digest for LEN bytes beginning at BUFFER.  The
+   result is always in little endian byte order, so that a byte-wise
+   output yields to the wanted ASCII representation of the message
+   digest.  */
+void *
+sha1_buffer (const char *buffer, size_t len, void *resblock)
+{
+  struct sha1_ctx ctx;
+
+  /* Initialize the computation context.  */
+  sha1_init_ctx (&ctx);
+
+  /* Process whole buffer but last len % 64 bytes.  */
+  sha1_process_bytes (buffer, len, &ctx);
+
+  /* Put result in desired memory area.  */
+  return sha1_finish_ctx (&ctx, resblock);
+}
+
+void
+sha1_process_bytes (const void *buffer, size_t len, struct sha1_ctx *ctx)
+{
+  /* When we already have some bits in our internal buffer concatenate
+     both inputs first.  */
+  if (ctx->buflen != 0)
+    {
+      size_t left_over = ctx->buflen;
+      size_t add = 128 - left_over > len ? len : 128 - left_over;
+
+      memcpy (&((char *) ctx->buffer)[left_over], buffer, add);
+      ctx->buflen += add;
+
+      if (ctx->buflen > 64)
+	{
+	  sha1_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
+
+	  ctx->buflen &= 63;
+	  /* The regions in the following copy operation cannot overlap.  */
+	  memcpy (ctx->buffer,
+		  &((char *) ctx->buffer)[(left_over + add) & ~63],
+		  ctx->buflen);
+	}
+
+      buffer = (const char *) buffer + add;
+      len -= add;
+    }
+
+  /* Process available complete blocks.  */
+  if (len >= 64)
+    {
+#if !_STRING_ARCH_unaligned
+# define alignof(type) offsetof (struct { char c; type x; }, x)
+# define UNALIGNED_P(p) (((size_t) p) % alignof (sha1_uint32) != 0)
+      if (UNALIGNED_P (buffer))
+	while (len > 64)
+	  {
+	    sha1_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
+	    buffer = (const char *) buffer + 64;
+	    len -= 64;
+	  }
+      else
+#endif
+	{
+	  sha1_process_block (buffer, len & ~63, ctx);
+	  buffer = (const char *) buffer + (len & ~63);
+	  len &= 63;
+	}
+    }
+
+  /* Move remaining bytes in internal buffer.  */
+  if (len > 0)
+    {
+      size_t left_over = ctx->buflen;
+
+      memcpy (&((char *) ctx->buffer)[left_over], buffer, len);
+      left_over += len;
+      if (left_over >= 64)
+	{
+	  sha1_process_block (ctx->buffer, 64, ctx);
+	  left_over -= 64;
+	  memcpy (ctx->buffer, &ctx->buffer[16], left_over);
+	}
+      ctx->buflen = left_over;
+    }
+}
+
+/* --- Code below is the primary difference between md5.c and sha1.c --- */
+
+/* SHA1 round constants */
+#define K1 0x5a827999
+#define K2 0x6ed9eba1
+#define K3 0x8f1bbcdc
+#define K4 0xca62c1d6
+
+/* Round functions.  Note that F2 is the same as F4.  */
+#define F1(B,C,D) ( D ^ ( B & ( C ^ D ) ) )
+#define F2(B,C,D) (B ^ C ^ D)
+#define F3(B,C,D) ( ( B & C ) | ( D & ( B | C ) ) )
+#define F4(B,C,D) (B ^ C ^ D)
+
+/* Process LEN bytes of BUFFER, accumulating context into CTX.
+   It is assumed that LEN % 64 == 0.
+   Most of this code comes from GnuPG's cipher/sha1.c.  */
+
+void
+sha1_process_block (const void *buffer, size_t len, struct sha1_ctx *ctx)
+{
+  const sha1_uint32 *words = (const sha1_uint32*) buffer;
+  size_t nwords = len / sizeof (sha1_uint32);
+  const sha1_uint32 *endp = words + nwords;
+  sha1_uint32 x[16];
+  sha1_uint32 a = ctx->A;
+  sha1_uint32 b = ctx->B;
+  sha1_uint32 c = ctx->C;
+  sha1_uint32 d = ctx->D;
+  sha1_uint32 e = ctx->E;
+
+  /* First increment the byte count.  RFC 1321 specifies the possible
+     length of the file up to 2^64 bits.  Here we only compute the
+     number of bytes.  Do a double word increment.  */
+  ctx->total[0] += len;
+  if (ctx->total[0] < len)
+    ++ctx->total[1];
+
+#define rol(x, n) (((x) << (n)) | ((sha1_uint32) (x) >> (32 - (n))))
+
+#define M(I) ( tm =   x[I&0x0f] ^ x[(I-14)&0x0f] \
+		    ^ x[(I-8)&0x0f] ^ x[(I-3)&0x0f] \
+	       , (x[I&0x0f] = rol(tm, 1)) )
+
+#define R(A,B,C,D,E,F,K,M)  do { E += rol( A, 5 )     \
+				      + F( B, C, D )  \
+				      + K	      \
+				      + M;	      \
+				 B = rol( B, 30 );    \
+			       } while(0)
+
+  while (words < endp)
+    {
+      sha1_uint32 tm;
+      int t;
+      for (t = 0; t < 16; t++)
+	{
+	  x[t] = SWAP (*words);
+	  words++;
+	}
+
+      R( a, b, c, d, e, F1, K1, x[ 0] );
+      R( e, a, b, c, d, F1, K1, x[ 1] );
+      R( d, e, a, b, c, F1, K1, x[ 2] );
+      R( c, d, e, a, b, F1, K1, x[ 3] );
+      R( b, c, d, e, a, F1, K1, x[ 4] );
+      R( a, b, c, d, e, F1, K1, x[ 5] );
+      R( e, a, b, c, d, F1, K1, x[ 6] );
+      R( d, e, a, b, c, F1, K1, x[ 7] );
+      R( c, d, e, a, b, F1, K1, x[ 8] );
+      R( b, c, d, e, a, F1, K1, x[ 9] );
+      R( a, b, c, d, e, F1, K1, x[10] );
+      R( e, a, b, c, d, F1, K1, x[11] );
+      R( d, e, a, b, c, F1, K1, x[12] );
+      R( c, d, e, a, b, F1, K1, x[13] );
+      R( b, c, d, e, a, F1, K1, x[14] );
+      R( a, b, c, d, e, F1, K1, x[15] );
+      R( e, a, b, c, d, F1, K1, M(16) );
+      R( d, e, a, b, c, F1, K1, M(17) );
+      R( c, d, e, a, b, F1, K1, M(18) );
+      R( b, c, d, e, a, F1, K1, M(19) );
+      R( a, b, c, d, e, F2, K2, M(20) );
+      R( e, a, b, c, d, F2, K2, M(21) );
+      R( d, e, a, b, c, F2, K2, M(22) );
+      R( c, d, e, a, b, F2, K2, M(23) );
+      R( b, c, d, e, a, F2, K2, M(24) );
+      R( a, b, c, d, e, F2, K2, M(25) );
+      R( e, a, b, c, d, F2, K2, M(26) );
+      R( d, e, a, b, c, F2, K2, M(27) );
+      R( c, d, e, a, b, F2, K2, M(28) );
+      R( b, c, d, e, a, F2, K2, M(29) );
+      R( a, b, c, d, e, F2, K2, M(30) );
+      R( e, a, b, c, d, F2, K2, M(31) );
+      R( d, e, a, b, c, F2, K2, M(32) );
+      R( c, d, e, a, b, F2, K2, M(33) );
+      R( b, c, d, e, a, F2, K2, M(34) );
+      R( a, b, c, d, e, F2, K2, M(35) );
+      R( e, a, b, c, d, F2, K2, M(36) );
+      R( d, e, a, b, c, F2, K2, M(37) );
+      R( c, d, e, a, b, F2, K2, M(38) );
+      R( b, c, d, e, a, F2, K2, M(39) );
+      R( a, b, c, d, e, F3, K3, M(40) );
+      R( e, a, b, c, d, F3, K3, M(41) );
+      R( d, e, a, b, c, F3, K3, M(42) );
+      R( c, d, e, a, b, F3, K3, M(43) );
+      R( b, c, d, e, a, F3, K3, M(44) );
+      R( a, b, c, d, e, F3, K3, M(45) );
+      R( e, a, b, c, d, F3, K3, M(46) );
+      R( d, e, a, b, c, F3, K3, M(47) );
+      R( c, d, e, a, b, F3, K3, M(48) );
+      R( b, c, d, e, a, F3, K3, M(49) );
+      R( a, b, c, d, e, F3, K3, M(50) );
+      R( e, a, b, c, d, F3, K3, M(51) );
+      R( d, e, a, b, c, F3, K3, M(52) );
+      R( c, d, e, a, b, F3, K3, M(53) );
+      R( b, c, d, e, a, F3, K3, M(54) );
+      R( a, b, c, d, e, F3, K3, M(55) );
+      R( e, a, b, c, d, F3, K3, M(56) );
+      R( d, e, a, b, c, F3, K3, M(57) );
+      R( c, d, e, a, b, F3, K3, M(58) );
+      R( b, c, d, e, a, F3, K3, M(59) );
+      R( a, b, c, d, e, F4, K4, M(60) );
+      R( e, a, b, c, d, F4, K4, M(61) );
+      R( d, e, a, b, c, F4, K4, M(62) );
+      R( c, d, e, a, b, F4, K4, M(63) );
+      R( b, c, d, e, a, F4, K4, M(64) );
+      R( a, b, c, d, e, F4, K4, M(65) );
+      R( e, a, b, c, d, F4, K4, M(66) );
+      R( d, e, a, b, c, F4, K4, M(67) );
+      R( c, d, e, a, b, F4, K4, M(68) );
+      R( b, c, d, e, a, F4, K4, M(69) );
+      R( a, b, c, d, e, F4, K4, M(70) );
+      R( e, a, b, c, d, F4, K4, M(71) );
+      R( d, e, a, b, c, F4, K4, M(72) );
+      R( c, d, e, a, b, F4, K4, M(73) );
+      R( b, c, d, e, a, F4, K4, M(74) );
+      R( a, b, c, d, e, F4, K4, M(75) );
+      R( e, a, b, c, d, F4, K4, M(76) );
+      R( d, e, a, b, c, F4, K4, M(77) );
+      R( c, d, e, a, b, F4, K4, M(78) );
+      R( b, c, d, e, a, F4, K4, M(79) );
+
+      a = ctx->A += a;
+      b = ctx->B += b;
+      c = ctx->C += c;
+      d = ctx->D += d;
+      e = ctx->E += e;
+    }
+}
Index: libiberty/Makefile.in
===================================================================
--- libiberty/Makefile.in	(revision 133502)
+++ libiberty/Makefile.in	(working copy)
@@ -143,10 +143,11 @@ CFILES = alloca.c argv.c asprintf.c atex
 	 pex-unix.c pex-win32.c						\
          physmem.c putenv.c						\
 	random.c regex.c rename.c rindex.c				\
-	safe-ctype.c setenv.c sigsetmask.c snprintf.c sort.c spaces.c	\
-	 splay-tree.c stpcpy.c stpncpy.c strcasecmp.c strchr.c strdup.c	\
-	 strerror.c strncasecmp.c strncmp.c strrchr.c strsignal.c	\
-	 strstr.c strtod.c strtol.c strtoul.c strndup.c	strverscmp.c	\
+	safe-ctype.c setenv.c sha1.c sigsetmask.c snprintf.c sort.c	\
+	 spaces.c splay-tree.c stpcpy.c stpncpy.c strcasecmp.c		\
+	 strchr.c strdup.c strerror.c strncasecmp.c strncmp.c		\
+	 strrchr.c strsignal.c strstr.c strtod.c strtol.c strtoul.c	\
+	 strndup.c strverscmp.c						\
 	tmpnam.c							\
 	unlink-if-ordinary.c						\
 	vasprintf.c vfork.c vfprintf.c vprintf.c vsnprintf.c vsprintf.c	\
@@ -156,7 +157,8 @@ CFILES = alloca.c argv.c asprintf.c atex
 
 # These are always included in the library.  The first four are listed
 # first and by compile time to optimize parallel builds.
-REQUIRED_OFILES = ./regex.o ./cplus-dem.o ./cp-demangle.o ./md5.o	\
+REQUIRED_OFILES =							\
+	./regex.o ./cplus-dem.o ./cp-demangle.o ./md5.o ./sha1.o	\
 	./alloca.o ./argv.o						\
 	./choose-temp.o ./concat.o ./cp-demint.o			\
 	./dyn-string.o							\
@@ -944,6 +946,12 @@ $(CONFIGURED_OFILES): stamp-picdir
 	else true; fi
 	$(COMPILE.c) $(srcdir)/setenv.c $(OUTPUT_OPTION)
 
+./sha1.o: $(srcdir)/sha1.c stamp-h $(INCDIR)/sha1.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/sha1.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/sha1.c $(OUTPUT_OPTION)
+
 ./sigsetmask.o: $(srcdir)/sigsetmask.c $(INCDIR)/ansidecl.h
 	if [ x"$(PICFLAG)" != x ]; then \
 	  $(COMPILE.c) $(PICFLAG) $(srcdir)/sigsetmask.c -o pic/$@; \

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]