This is the mail archive of the gcc-patches@gcc.gnu.org mailing list for the GCC project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

PATCH: New approach to --with-cpu, take 4


This incorporates all earlier comments, including Dave's checks for
legal scheduling models on the PA.

OK?  More comments?

-- 
Daniel Jacobowitz                           Carnegie Mellon University
MontaVista Software                         Debian GNU/Linux Developer

2002-08-01  Daniel Jacobowitz  <drow@mvista.com>

	* Makefile.in (DRIVER_DEFINES): Add @target_default_options@
	* configure.in: Add @target_default_options@.  Document --with-cpu,
	--with-arch, --with-tune, --with-schedule, and --with-float.
	* config.gcc: Reorganize $with_cpu logic.  Set
	target_default_options according to the default CPU, $with_cpu,
	$with_arch, $with_tune, $with_schedule, and $with_float.
	Recognize legal scheduling models for HPPA.
	* config/mips/mips.h (TARGET_DEFAULT_ARCH_P)
	(TARGET_DEFAULT_FLOAT_P): New macros.
	* gcc.c (default_options, add_option, option_present): New
	functions.
	(process_command): Call default_options.
	* doc/install.texi: Update --with-cpu documentation.  Mention
	--with-arch, --with-schedule, --with-tune, and --with-float.

Index: gcc/Makefile.in
===================================================================
RCS file: /cvs/gcc/gcc/gcc/Makefile.in,v
retrieving revision 1.919
diff -u -p -r1.919 Makefile.in
--- gcc/Makefile.in	29 Jul 2002 19:31:23 -0000	1.919
+++ gcc/Makefile.in	1 Aug 2002 20:13:04 -0000
@@ -1251,6 +1251,7 @@ c-dump.o : c-dump.c $(CONFIG_H) $(SYSTEM
 # Language-independent files.
 
 DRIVER_DEFINES = \
+  @target_default_options@ \
   -DSTANDARD_STARTFILE_PREFIX=\"$(unlibsubdir)/\" \
   -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc-lib/\" \
   -DDEFAULT_TARGET_VERSION=\"$(version)\" \
Index: gcc/config.gcc
===================================================================
RCS file: /cvs/gcc/gcc/gcc/config.gcc,v
retrieving revision 1.230
diff -u -p -r1.230 config.gcc
--- gcc/config.gcc	31 Jul 2002 23:18:38 -0000	1.230
+++ gcc/config.gcc	1 Aug 2002 20:13:07 -0000
@@ -2782,173 +2782,190 @@ case $machine in
 	;;
 esac
 
-# Distinguish i[34567]86
-# Also, do not run mips-tfile on MIPS if using gas.
-# Process --with-cpu= for PowerPC/rs6000
-target_cpu_default2=
-case $machine in
-i486-*-*)
-	target_cpu_default2=TARGET_CPU_DEFAULT_i486
-	;;
-i586-*-*)
-	case $target_alias in
-		k6_2-*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_k6_2
-			;;
-		k6_3-*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_k6_3
-			;;
-		k6-*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_k6
-			;;
-		pentium_mmx-*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_pentium_mmx
-			;;
-		*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_pentium
-			;;
-	esac
-	;;
-i686-*-* | i786-*-*)
-	case $target_alias in
-		athlon_xp-*|athlon_mp-*|athlon_4-*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_athlon_sse
-			;;
-		athlon_tbird-*|athlon-*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_athlon
-			;;
-		pentium2-*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_pentium2
-			;;
-		pentium3-*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_pentium3
-			;;
-		pentium4-*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_pentium4
-			;;
-		*)
-			target_cpu_default2=TARGET_CPU_DEFAULT_pentiumpro
+if test x$pass2done = xyes
+then
+	case "x$with_cpu" in
+		xyes | xno)
+			echo "--with-cpu must be passed a value" 1>&2
+			exit 1
 			;;
 	esac
-	;;
-x86_64-*-*)
-	# We should have hammer chip here, but it does not exist yet and
-	# thus it is not supported.  Athlon_SSE is probably equivalent feature
-	# wise to hammer from our point of view except for 64bit mode.
-	target_cpu_default2=TARGET_CPU_DEFAULT_athlon_sse
-	;;
-alpha*-*-*)
-	case $machine in
-		alphaev6[78]*)
-			target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX|MASK_CIX"
-			;;
-		alphaev6*)
-			target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX"
-			;;
-		alphapca56*)
-			target_cpu_default2="MASK_CPU_EV5|MASK_BWX|MASK_MAX"
-			;;
-		alphaev56*)
-			target_cpu_default2="MASK_CPU_EV5|MASK_BWX"
+
+	# If there is no $with_cpu option, try to infer one from ${machine}.
+	if test x$with_cpu = x
+	then
+		case $machine in
+		i486-*-*)
+			with_cpu=i486
+			;;
+		i586-*-*)
+			case $target_alias in
+			k6_2-*)
+				with_cpu=k6-2
+				;;
+			k6_3-*)
+				with_cpu=k6-3
+				;;
+			k6-*)
+				with_cpu=k6
+				;;
+			pentium_mmx-*)
+				with_cpu=pentium-mmx
+				;;
+			*)
+				with_cpu=pentium
+				;;
+			esac
+			;;
+		i686-*-* | i786-*-*)
+			case $target_alias in
+			athlon_xp-*|athlon_mp-*|athlon_4-*)
+				with_cpu=athlon-4
+				;;
+			athlon_tbird-*|athlon-*)
+				with_cpu=athlon
+				;;
+			pentium2-*)
+				with_cpu=pentium2
+				;;
+			pentium3-*)
+				with_cpu=pentium3
+				;;
+			pentium4-*)
+				with_cpu=pentium4
+				;;
+			*)
+				with_cpu=pentiumpro
+				;;
+			esac
+			;;
+		x86_64-*-*)
+			# We should have hammer chip here, but it does not
+			# exist yet and thus it is not supported.  Athlon_SSE
+			# is probably equivalent feature wise to hammer from
+			# our point of view except for 64bit mode.
+			with_cpu=athlon-sse
+			;;
+		alpha*-*-*)
+			case $machine in
+			alphaev6[78]*)
+				with_cpu=ev67
+				;;
+			alphaev6*)
+				with_cpu=ev6
+				;;
+			alphapca56*)
+				with_cpu=pca56
+				;;
+			alphaev56*)
+				with_cpu=ev56
+				;;
+			alphaev5*)
+				with_cpu=ev5
+				;;
+			esac
 			;;
-		alphaev5*)
-			target_cpu_default2="MASK_CPU_EV5"
+		sparc*-*-*)
+			with_cpu="`echo $machine | sed 's/-.*$//'`"
 			;;
-	esac
+		esac
+	fi
 
-	if test x$gas = xyes
-	then
-		if test "$target_cpu_default2" = ""
+	case "$machine" in
+	alpha*-*-*)
+		if test x$gas = xyes
 		then
-			target_cpu_default2="MASK_GAS"
-		else
-			target_cpu_default2="${target_cpu_default2}|MASK_GAS"
+			if test "$target_cpu_default2" = ""
+			then
+				target_cpu_default2="MASK_GAS"
+			else
+				target_cpu_default2="${target_cpu_default2}|MASK_GAS"
+			fi
 		fi
-	fi
-	;;
-arm*-*-*)
-	case "x$with_cpu" in
-		x)
-			# The most generic
-			target_cpu_default2="TARGET_CPU_generic"
-			;;
-
+		;;
+	arm*-*-*)
+		# Start with the most generic.
+		target_cpu_default2="TARGET_CPU_generic"
 		# Distinguish cores, and major variants
 		# arm7m doesn't exist, but D & I don't affect code
+		case "x$with_cpu" in
 		xarm[236789] | xarm250 | xarm[67][01]0 \
 		| xarm7m | xarm7dm | xarm7dmi | xarm[79]tdmi \
 		| xarm7100 | xarm7500 | xarm7500fe | xarm810 \
 		| xxscale \
 		| xstrongarm | xstrongarm110 | xstrongarm1100)
-			target_cpu_default2="TARGET_CPU_$with_cpu"
+			# OK
 			;;
 
-		xyes | xno)
-			echo "--with-cpu must be passed a value" 1>&2
+		*)
+			echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
 			exit 1
 			;;
-
-		*)
-			if test x$pass2done = xyes
-			then
-				echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
+		esac
+		;;
+	hppa*-*-* | parisc*-*-*)
+		if test x$gas = xyes
+		then
+			target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY"
+		fi
+		case ".$with_schedule" in
+			.700 | .7100 | .7100LC | .7200 | .7300 | .8000)
+				;;
+			.)
+				case $machine in
+					hppa1* | parisc1*)
+						# Override default PA8000
+						# scheduling model.
+						with_schedule=7100LC
+						;;
+				esac
+				;;
+			*)
+				echo "Unknown cpu used with --with-schedule=$with_schedule" 1>&2
 				exit 1
+				;;
+		esac
+		;;
+	mips*-*-*)
+		case $machine in
+		mips*-*-ecoff* | mips*-*-elf*)
+			if test x$gas = xyes
+			then
+				if test x$gnu_ld = xyes
+				then
+					target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
+				else
+					target_cpu_default2="MASK_GAS"
+				fi
 			fi
 			;;
-	esac
-	;;
-
-hppa*-*-* | parisc*-*-*)
-	if test x$gas = xyes
-	then
-		target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY"
-	fi
-	case $machine in
-		hppa1* | parisc1*)
-			tm_defines="TARGET_SCHED_DEFAULT=\\\"7100LC\\\""
-			;;
-	esac
-	;;
-mips*-*-*)
-	case $machine in
-	mips*-*-ecoff* | mips*-*-elf*)
-		if test x$gas = xyes
-		then
-			if test x$gnu_ld = xyes
+		mips*-*-*)
+			if test x$gas = xyes
 			then
-				target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
-			else
 				target_cpu_default2="MASK_GAS"
 			fi
-		fi
-		;;
-	mips*-*-*)
-		if test x$gas = xyes
+			;;
+		esac
+		case $machine in
+			mips*el-*-*)
+				tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
+				;;
+		esac
+		if test "x$enable_gofast" = xyes
 		then
-			target_cpu_default2="MASK_GAS"
+			tm_defines="INIT_SUBTARGET_OPTABS=INIT_GOFAST_OPTABS $tm_defines"
+			tm_file="gofast.h $tm_file"
+			tmake_file="mips/t-gofast $tmake_file"
+		else
+			tmake_file="mips/t-mips $tmake_file"
 		fi
 		;;
-	esac
-	case $machine in
-		mips*el-*-*)
-			tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
-			;;
-	esac
-	if test "x$enable_gofast" = xyes
-	then
-		tm_defines="INIT_SUBTARGET_OPTABS=INIT_GOFAST_OPTABS $tm_defines"
-		tm_file="gofast.h $tm_file"
-		tmake_file="mips/t-gofast $tmake_file"
-	else
-		tmake_file="mips/t-mips $tmake_file"
-	fi
-	;;
-powerpc*-*-* | rs6000-*-*)
-        if test x$enable_altivec = xyes
-        then
-                tm_file="$tm_file rs6000/altivec-defs.h"
-        fi
-	case "x$with_cpu" in
+	powerpc*-*-* | rs6000-*-*)
+        	if test x$enable_altivec = xyes
+	        then
+        	        tm_file="$tm_file rs6000/altivec-defs.h"
+	        fi
+		case "x$with_cpu" in
 		x)
 			;;
 
@@ -2963,49 +2980,48 @@ powerpc*-*-* | rs6000-*-*)
 			target_cpu_default2="\\\"$with_cpu\\\""
 			;;
 
-		xyes | xno)
-			echo "--with-cpu must be passed a value" 1>&2
-			exit 1
-			;;
-
 		*)
-			if test x$pass2done = xyes
-			then
-				echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
-				exit 1
-			fi
-			;;
-	esac
-	c_target_objs="${c_target_objs} rs6000-c.o"
-	cxx_target_objs="${cxx_target_objs} rs6000-c.o"
-	tmake_file="${tmake_file} rs6000/t-rs6000-c-rule"
-	;;
-sparc*-*-*)
-	case ".$with_cpu" in
-		.)
-			target_cpu_default2=TARGET_CPU_"`echo $machine | sed 's/-.*$//'`"
+			echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
+			exit 1
 			;;
+		esac
+		c_target_objs="${c_target_objs} rs6000-c.o"
+		cxx_target_objs="${cxx_target_objs} rs6000-c.o"
+		tmake_file="${tmake_file} rs6000/t-rs6000-c-rule"
+		;;
+	sparc*-*-*)
+		case .$with_cpu in
 		.supersparc | .hypersparc | .ultrasparc | .v7 | .v8 | .v9)
 			target_cpu_default2="TARGET_CPU_$with_cpu"
 			;;
 		*)
-			if test x$pass2done = xyes
-			then
-				echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
-				exit 1
-			fi
+			echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
+			exit 1
 			;;
+		esac
+		;;
 	esac
-	;;
-esac
 
-if test "$target_cpu_default2" != ""
-then
-	if test "$target_cpu_default" != ""
+	t=
+	for option in cpu arch tune schedule float
+	do
+		val=`eval 'echo $with_'$option`
+		if test -n "$val"; then
+			upper=`echo $option | tr '[a-z]' '[A-Z]'`
+			option="TARGET_DEFAULT_OPTION_$upper"
+			t="${t} -D${option}=\"${val}\""
+		fi
+	done
+	target_default_options="${t}"
+
+	if test "$target_cpu_default2" != ""
 	then
-		target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
-	else
-		target_cpu_default=$target_cpu_default2
+		if test "$target_cpu_default" != ""
+		then
+			target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
+		else
+			target_cpu_default=$target_cpu_default2
+		fi
 	fi
 fi
 
Index: gcc/configure
===================================================================
RCS file: /cvs/gcc/gcc/gcc/configure,v
retrieving revision 1.625
diff -u -p -r1.625 configure
--- gcc/configure	29 Jul 2002 22:07:26 -0000	1.625
+++ gcc/configure	1 Aug 2002 20:13:13 -0000
@@ -2244,7 +2244,7 @@ EOF
 fi
 
 # Find some useful tools
-for ac_prog in gawk mawk nawk awk
+for ac_prog in mawk gawk nawk awk
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
Index: gcc/configure.in
===================================================================
RCS file: /cvs/gcc/gcc/gcc/configure.in,v
retrieving revision 1.612
diff -u -p -r1.612 configure.in
--- gcc/configure.in	29 Jul 2002 22:07:27 -0000	1.612
+++ gcc/configure.in	1 Aug 2002 20:13:15 -0000
@@ -136,6 +136,20 @@ AC_ARG_WITH(elf,
 elf="$with_elf",
 elf=no)
 
+# With a particular CPU
+AC_ARG_WITH(cpu,
+[  --with-cpu              default to -mcpu=CPU],,)
+AC_ARG_WITH(arch,
+[  --with-arch             default to -march=CPU],,)
+AC_ARG_WITH(schedule,
+[  --with-schedule         default to -mschedule=CPU],,)
+AC_ARG_WITH(tune,
+[  --with-tune             default to -mtune=CPU],,)
+
+# Default floating-point setting
+AC_ARG_WITH(float,
+[  --with-float            default to the specified type of floating point],,)
+
 # Specify the local prefix
 local_prefix=
 AC_ARG_WITH(local-prefix,
@@ -2694,6 +2708,7 @@ AC_SUBST(target_alias)
 AC_SUBST(c_target_objs)
 AC_SUBST(cxx_target_objs)
 AC_SUBST(target_cpu_default)
+AC_SUBST(target_default_options)
 
 AC_SUBST_FILE(target_overrides)
 AC_SUBST_FILE(host_overrides)
Index: gcc/gcc.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/gcc.c,v
retrieving revision 1.333
diff -u -p -r1.333 gcc.c
--- gcc/gcc.c	1 Aug 2002 06:24:59 -0000	1.333
+++ gcc/gcc.c	1 Aug 2002 20:13:21 -0000
@@ -990,6 +990,112 @@ static const struct option_map option_ma
  };
 
 
+static int option_present PARAMS ((int, const char *const *, const char *));
+static void add_option PARAMS ((int *, const char *const **, const char *));
+static void default_options PARAMS ((int *, const char *const **));
+
+static int
+option_present (argc, argv, option)
+     int argc;
+     const char *const *argv;
+     const char *option;
+{
+  int i;
+  int len;
+
+  len = strlen (option);
+
+  for (i = 0; i < argc; i++)
+    if (option[len - 1] == '=')
+      {
+	if (strncmp (argv[i], option, len) == 0)
+	  return 1;
+      }
+    else
+      {
+	if (strcmp (argv[i], option) == 0)
+	  return 1;
+      }
+
+  return 0;
+}
+
+static void
+add_option (argcp, argvp, option)
+     int *argcp;
+     const char *const **argvp;
+     const char *option;
+{
+  const char **newargv = (const char **) xmalloc ((*argcp + 2) * sizeof (char *));
+  int i;
+
+  newargv[0] = (*argvp)[0];
+  newargv[1] = option;
+  for (i = 1; i < *argcp; i++)
+    newargv[i + 1] = (*argvp)[i];
+  newargv[i + 1] = NULL;
+
+  *argvp = newargv;
+  (*argcp)++;
+}
+
+#ifndef TARGET_DEFAULT_ARCH_P
+#define TARGET_DEFAULT_ARCH_P() (! option_present (*argcp, *argvp, "-march="))
+#endif
+
+#ifndef TARGET_DEFAULT_CPU_P
+#define TARGET_DEFAULT_CPU_P() (! option_present (*argcp, *argvp, "-mcpu="))
+#endif
+
+#ifndef TARGET_DEFAULT_SCHEDULE_P
+#define TARGET_DEFAULT_SCHEDULE_P() (! option_present (*argcp, *argvp, \
+						       "-mschedule="))
+#endif
+
+#ifndef TARGET_DEFAULT_TUNE_P
+#define TARGET_DEFAULT_TUNE_P() (! option_present (*argcp, *argvp, "-mtune="))
+#endif
+
+#ifndef TARGET_DEFAULT_FLOAT_P
+#define TARGET_DEFAULT_FLOAT_P() (! option_present (*argcp, *argvp, \
+						    "-msoft-float") \
+				  && ! option_present (*argcp, *argvp, \
+						       "-mhard-float"))
+#endif
+
+static void
+default_options (argcp, argvp)
+     int *argcp ATTRIBUTE_UNUSED;
+     const char *const **argvp ATTRIBUTE_UNUSED;
+{
+#ifdef TARGET_DEFAULT_OPTION_ARCH
+  if (TARGET_DEFAULT_ARCH_P ())
+    add_option (argcp, argvp, "-march=" XSTRING (TARGET_DEFAULT_OPTION_ARCH));
+#endif
+
+#ifdef TARGET_DEFAULT_OPTION_CPU
+  if (TARGET_DEFAULT_CPU_P ())
+    add_option (argcp, argvp, "-mcpu=" XSTRING (TARGET_DEFAULT_OPTION_CPU));
+#endif
+
+#ifdef TARGET_DEFAULT_OPTION_SCHEDULE
+  if (TARGET_DEFAULT_SCHEDULE_P ())
+    add_option (argcp, argvp,
+		"-mschedule=" XSTRING (TARGET_DEFAULT_OPTION_SCHEDULE));
+#endif
+
+#ifdef TARGET_DEFAULT_OPTION_TUNE
+  if (TARGET_DEFAULT_TUNE_P ())
+    add_option (argcp, argvp, "-mtune=" XSTRING (TARGET_DEFAULT_OPTION_TUNE));
+#endif
+
+#ifdef TARGET_DEFAULT_OPTION_FLOAT
+  if (TARGET_DEFAULT_FLOAT_P ())
+    add_option (argcp, argvp, "-m" XSTRING (TARGET_DEFAULT_OPTION_FLOAT) "-float");
+#endif
+}
+
+
 #ifdef TARGET_OPTION_TRANSLATE_TABLE
 static const struct {
   const char *const option_found;
@@ -3374,6 +3480,9 @@ process_command (argc, argv)
 
   /* Convert new-style -- options to old-style.  */
   translate_options (&argc, &argv);
+
+  /* Add any default options.  */
+  default_options (&argc, &argv);
 
   /* Do language-specific adjustment/addition of flags.  */
   lang_specific_driver (&argc, &argv, &added_libraries);
Index: gcc/config/mips/mips.h
===================================================================
RCS file: /cvs/gcc/gcc/gcc/config/mips/mips.h,v
retrieving revision 1.206
diff -u -p -r1.206 mips.h
--- gcc/config/mips/mips.h	31 Jul 2002 02:13:31 -0000	1.206
+++ gcc/config/mips/mips.h	1 Aug 2002 20:13:28 -0000
@@ -737,6 +737,20 @@ extern void		sbss_section PARAMS ((void)
       N_("Specify cache flush function")},				\
 }
 
+/* This is not quite correct, because -mips16 will override a default
+   architecture.  This is an unfortunate consequence of -mips16 being
+   completely orthogonal to the other -mipsN switches, yet sometimes
+   overriding them on the command line.  */
+#define TARGET_DEFAULT_ARCH_P() \
+  (! option_present (*argcp, *argvp, "-march=") \
+   && (! option_present (*argcp, *argvp, "-mips") \
+       || option_present (*argcp, *argvp, "-mips16")))
+
+#define TARGET_DEFAULT_FLOAT_P() \
+  (! option_present (*argcp, *argvp, "-msoft-float") \
+   && ! option_present (*argcp, *argvp, "-mhard-float") \
+   && ! option_present (*argcp, *argvp, "-msingle-float"))
+
 /* This is meant to be redefined in the host dependent files.  */
 #define SUBTARGET_TARGET_OPTIONS
 
Index: gcc/doc/install.texi
===================================================================
RCS file: /cvs/gcc/gcc/gcc/doc/install.texi,v
retrieving revision 1.128
diff -u -p -r1.128 install.texi
--- gcc/doc/install.texi	30 Jun 2002 19:27:48 -0000	1.128
+++ gcc/doc/install.texi	1 Aug 2002 20:13:32 -0000
@@ -671,11 +671,24 @@ Microsoft Win32 API thread support.
 
 @item --with-cpu=@var{cpu}
 Specify which cpu variant the
-compiler should generate code for by default.  This is currently
-only supported on the some ports, specifically arm, powerpc, and
-SPARC@.  If configure does not recognize the model name (e.g.@: arm700,
-603e, or ultrasparc) you provide, please check the configure script
-for a complete list of supported models.
+compiler should generate code for by default.  @var{cpu}
+will be used as the default value of the @code{-mcpu=} switch.
+This option is only supported on some ports, including arm, i386, powerpc,
+and SPARC@.
+
+@item --with-schedule=@var{cpu}
+@itemx --with-arch=@var{cpu}
+@itemx --with-tune=@var{cpu}
+These configure options provide default values for the @code{-mschedule=},
+@code{-march=}, and @code{-mtune=} options, respectively.  As with
+@code{--with-cpu} the legal values of @var{CPU} depend on the port; these
+options are not valid for all ports, only those which accept the respective
+options.
+
+@item --with-float=@var{type}
+Specify the default form of floating point.  The normal choices are ``hard''
+and ``soft''.  Which (if any) choices are recognized depends on the port;
+for instance, MIPS also recognizes ``single''.
 
 @item --enable-altivec
 Specify that the target supports AltiVec vector enhancements.  This


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]