This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
Windows registry
- To: gcc-patches at gcc dot gnu dot org
- Subject: Windows registry
- From: Phil Edwards <pedwards at disaster dot jaj dot com>
- Date: Fri, 2 Jun 2000 15:25:46 -0400
In response to
<URL:http://gcc.gnu.org/ml/gcc-bugs/2000-05/msg00205.html>
here is a patch to avoid the "checking whether windows registry support"
stuff altogether on non-Windows targets. Due to the additional indentation,
the diff is large, but it consists of essentially
case $target_os in
*cygwin*)
all the stuff that was there before ;;
*) ;;
esac
The choice of cygwin was just a call on my part, perhaps it should be
something like cygwin | winnt | wince ...?
Tested under Cygwin 1.1 (key takes effect) versus Solaris8 (it doesn't).
2000-06-02 Phil Edwards <pme@sourceware.cygnus.com>
* configure.in: If not on Windows, don't even bother with
"registry key" stuff.
* configure: Regenerate.
Index: configure.in
===================================================================
RCS file: /cvs/gcc/egcs/gcc/configure.in,v
retrieving revision 1.382
diff -u -3 -r1.382 configure.in
--- configure.in 2000/05/31 18:10:28 1.382
+++ configure.in 2000/06/02 20:26:07
@@ -4120,48 +4120,54 @@
AM_GNU_GETTEXT
XGETTEXT="AWK='$AWK' \$(SHELL) \$(top_srcdir)/exgettext $XGETTEXT"
-# Windows32 Registry support for specifying GCC installation paths.
-AC_ARG_ENABLE(win32-registry,
-[ --disable-win32-registry
- Disable lookup of installation paths in the
- Registry on Windows hosts.
- --enable-win32-registry Enable registry lookup (default).
- --enable-win32-registry=KEY
- Use KEY instead of GCC version as the last portion
- of the registry key.],,)
-
-AC_MSG_CHECKING(whether windows registry support is requested)
-if test x$enable_win32_registry != xno; then
- AC_DEFINE(ENABLE_WIN32_REGISTRY, 1,
-[Define to 1 if installation paths should be looked up in Windows32
- Registry. Ignored on non windows32 hosts.])
- AC_MSG_RESULT(yes)
-else
- AC_MSG_RESULT(no)
-fi
-
-# Check if user specified a different registry key.
-case x${enable_win32_registry} in
-x | xyes)
- # default.
- gcc_cv_win32_registry_key="$VERSION"
- ;;
-xno)
- # no registry lookup.
- gcc_cv_win32_registry_key=''
- ;;
-*)
- # user-specified key.
- gcc_cv_win32_registry_key="$enable_win32_registry"
- ;;
+case $target_os in
+ *cygwin*)
+ # Windows32 Registry support for specifying GCC installation paths.
+ AC_ARG_ENABLE(win32-registry,
+ [ --disable-win32-registry
+ Disable lookup of installation paths in the
+ Registry on Windows hosts.
+ --enable-win32-registry Enable registry lookup (default).
+ --enable-win32-registry=KEY
+ Use KEY instead of GCC version as the last portion
+ of the registry key.],,)
+
+ AC_MSG_CHECKING(whether windows registry support is requested)
+ if test x$enable_win32_registry != xno; then
+ AC_DEFINE(ENABLE_WIN32_REGISTRY, 1,
+ [Define to 1 if installation paths should be looked up in Windows32
+ Registry. Ignored on non windows32 hosts.])
+ AC_MSG_RESULT(yes)
+ else
+ AC_MSG_RESULT(no)
+ fi
+
+ # Check if user specified a different registry key.
+ case x${enable_win32_registry} in
+ x | xyes)
+ # default.
+ gcc_cv_win32_registry_key="$VERSION"
+ ;;
+ xno)
+ # no registry lookup.
+ gcc_cv_win32_registry_key=''
+ ;;
+ *)
+ # user-specified key.
+ gcc_cv_win32_registry_key="$enable_win32_registry"
+ ;;
+ esac
+
+ if test x$enable_win32_registry != xno; then
+ AC_MSG_CHECKING(registry key on windows hosts)
+ AC_DEFINE_UNQUOTED(WIN32_REGISTRY_KEY, "$gcc_cv_win32_registry_key",
+ [Define to be the last portion of registry key on windows hosts.])
+ AC_MSG_RESULT($gcc_cv_win32_registry_key)
+ fi
+ ;;
+ *)
+ ;;
esac
-
-if test x$enable_win32_registry != xno; then
- AC_MSG_CHECKING(registry key on windows hosts)
- AC_DEFINE_UNQUOTED(WIN32_REGISTRY_KEY, "$gcc_cv_win32_registry_key",
- [Define to be the last portion of registry key on windows hosts.])
- AC_MSG_RESULT($gcc_cv_win32_registry_key)
-fi
# Get an absolute path to the GCC top-level source directory
holddir=`pwd`
Index: configure
===================================================================
RCS file: /cvs/gcc/egcs/gcc/configure,v
retrieving revision 1.377
diff -u -3 -r1.377 configure
--- configure 2000/05/31 18:10:27 1.377
+++ configure 2000/06/02 20:26:07
@@ -60,12 +60,12 @@
--with-catgets use catgets functions if available"
ac_help="$ac_help
--disable-win32-registry
- Disable lookup of installation paths in the
- Registry on Windows hosts.
- --enable-win32-registry Enable registry lookup (default).
- --enable-win32-registry=KEY
- Use KEY instead of GCC version as the last portion
- of the registry key."
+ Disable lookup of installation paths in the
+ Registry on Windows hosts.
+ --enable-win32-registry Enable registry lookup (default).
+ --enable-win32-registry=KEY
+ Use KEY instead of GCC version as the last portion
+ of the registry key."
ac_help="$ac_help
--with-gc={simple,page} Choose the garbage collection mechanism to use
with the compiler."
@@ -617,7 +617,7 @@
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:621: checking LIBRARY_PATH variable" >&5
+echo "configure:610: checking LIBRARY_PATH variable" >&5
case ${LIBRARY_PATH} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
library_path_setting="contains current directory"
@@ -642,7 +642,7 @@
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:646: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:635: checking GCC_EXEC_PREFIX variable" >&5
case ${GCC_EXEC_PREFIX} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
gcc_exec_prefix_setting="contains current directory"
@@ -979,7 +979,7 @@
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:983: checking host system type" >&5
+echo "configure:972: checking host system type" >&5
host_alias=$host
case "$host_alias" in
@@ -1000,7 +1000,7 @@
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1004: checking target system type" >&5
+echo "configure:993: checking target system type" >&5
target_alias=$target
case "$target_alias" in
@@ -1018,7 +1018,7 @@
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1022: checking build system type" >&5
+echo "configure:1011: checking build system type" >&5
build_alias=$build
case "$build_alias" in
@@ -1045,7 +1045,7 @@
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1049: checking for $ac_word" >&5
+echo "configure:1038: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1075,7 +1075,7 @@
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1079: checking for $ac_word" >&5
+echo "configure:1068: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1126,7 +1126,7 @@
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1130: checking for $ac_word" >&5
+echo "configure:1119: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1158,7 +1158,7 @@
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1162: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1151: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1169,12 +1169,12 @@
cat > conftest.$ac_ext << EOF
-#line 1173 "configure"
+#line 1162 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
@@ -1200,12 +1200,12 @@
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1204: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1193: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1209: checking whether we are using GNU C" >&5
+echo "configure:1198: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1214,7 +1214,7 @@
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1218: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1207: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -1233,7 +1233,7 @@
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1237: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1226: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1266,10 +1266,10 @@
if test "x$CC" != xcc; then
echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1270: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1259: checking whether $CC and cc understand -c and -o together" >&5
else
echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1273: checking whether cc understands -c and -o together" >&5
+echo "configure:1262: checking whether cc understands -c and -o together" >&5
fi
set dummy $CC; ac_cc="`echo $2 |
sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
@@ -1281,16 +1281,16 @@
# We do the test twice because some compilers refuse to overwrite an
# existing .o file with -o, though they will create one.
ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1285: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1286: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1274: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1275: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
eval ac_cv_prog_cc_${ac_cc}_c_o=yes
if test "x$CC" != xcc; then
# Test first that cc exists at all.
- if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1291: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1280: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
ac_try='cc -c conftest.c -o conftest.o 1>&5'
- if { (eval echo configure:1293: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1294: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ if { (eval echo configure:1282: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1283: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
# cc works too.
:
@@ -1322,7 +1322,7 @@
echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1326: checking for long double" >&5
+echo "configure:1315: checking for long double" >&5
if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1330,7 +1330,7 @@
gcc_cv_c_long_double=yes
else
cat > conftest.$ac_ext <<EOF
-#line 1334 "configure"
+#line 1323 "configure"
#include "confdefs.h"
int main() {
@@ -1340,7 +1340,7 @@
switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
; return 0; }
EOF
-if { (eval echo configure:1344: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1333: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_long_double=yes
else
@@ -1363,7 +1363,7 @@
echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1367: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+echo "configure:1356: checking whether ${CC-cc} accepts -Wno-long-long" >&5
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -Wno-long-long -c conftest.c 2>&1`"; then
ac_cv_prog_cc_no_long_long=yes
@@ -1389,7 +1389,7 @@
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1393: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1382: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1417,7 +1417,7 @@
echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:1421: checking whether a default assembler was specified" >&5
+echo "configure:1410: checking whether a default assembler was specified" >&5
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
if test x"$gas_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
@@ -1429,7 +1429,7 @@
fi
echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:1433: checking whether a default linker was specified" >&5
+echo "configure:1422: checking whether a default linker was specified" >&5
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test x"$gnu_ld_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
@@ -1446,7 +1446,7 @@
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1450: checking for $ac_word" >&5
+echo "configure:1439: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1478,7 +1478,7 @@
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1482: checking for $ac_word" >&5
+echo "configure:1471: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1512,7 +1512,7 @@
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1516: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1505: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1520,7 +1520,7 @@
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1524 "configure"
+#line 1513 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -1531,7 +1531,7 @@
yywrap()
; return 0; }
EOF
-if { (eval echo configure:1535: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -1554,7 +1554,7 @@
fi
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:1558: checking whether ln works" >&5
+echo "configure:1547: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1586,7 +1586,7 @@
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1590: checking whether ln -s works" >&5
+echo "configure:1579: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1618,19 +1618,19 @@
fi
echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1622: checking for volatile" >&5
+echo "configure:1611: checking for volatile" >&5
if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1627 "configure"
+#line 1616 "configure"
#include "confdefs.h"
int main() {
volatile int foo;
; return 0; }
EOF
-if { (eval echo configure:1634: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1623: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_volatile=yes
else
@@ -1653,7 +1653,7 @@
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1657: checking for $ac_word" >&5
+echo "configure:1646: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1685,7 +1685,7 @@
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1689: checking for $ac_word" >&5
+echo "configure:1678: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1726,7 +1726,7 @@
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1730: checking for a BSD compatible install" >&5
+echo "configure:1719: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1777,7 +1777,7 @@
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1781: checking how to run the C preprocessor" >&5
+echo "configure:1770: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
@@ -1792,13 +1792,13 @@
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1796 "configure"
+#line 1785 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1802: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1791: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
@@ -1809,13 +1809,13 @@
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1813 "configure"
+#line 1802 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1808: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
@@ -1826,13 +1826,13 @@
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1830 "configure"
+#line 1819 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
@@ -1857,12 +1857,12 @@
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1861: checking for ANSI C header files" >&5
+echo "configure:1850: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1866 "configure"
+#line 1855 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
@@ -1870,7 +1870,7 @@
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1863: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -1887,7 +1887,7 @@
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1891 "configure"
+#line 1880 "configure"
#include "confdefs.h"
#include <string.h>
EOF
@@ -1905,7 +1905,7 @@
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1909 "configure"
+#line 1898 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
@@ -1926,7 +1926,7 @@
:
else
cat > conftest.$ac_ext <<EOF
-#line 1930 "configure"
+#line 1919 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1937,7 +1937,7 @@
exit (0); }
EOF
-if { (eval echo configure:1941: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
@@ -1961,12 +1961,12 @@
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1965: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1954: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1970 "configure"
+#line 1959 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
@@ -1975,7 +1975,7 @@
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:1979: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1968: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
@@ -1996,12 +1996,12 @@
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2000: checking whether string.h and strings.h may both be included" >&5
+echo "configure:1989: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2005 "configure"
+#line 1994 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
@@ -2009,7 +2009,7 @@
; return 0; }
EOF
-if { (eval echo configure:2013: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2002: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
@@ -2030,12 +2030,12 @@
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2034: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2023: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2039 "configure"
+#line 2028 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
@@ -2051,7 +2051,7 @@
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:2055: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2044: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
@@ -2078,17 +2078,17 @@
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2082: checking for $ac_hdr" >&5
+echo "configure:2071: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2087 "configure"
+#line 2076 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2092: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2081: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -2118,17 +2118,17 @@
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2122: checking for thread.h" >&5
+echo "configure:2111: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2127 "configure"
+#line 2116 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2132: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2121: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -2152,17 +2152,17 @@
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2156: checking for pthread.h" >&5
+echo "configure:2145: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2161 "configure"
+#line 2150 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2166: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2155: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -2189,7 +2189,7 @@
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2193: checking for $ac_word" >&5
+echo "configure:2182: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2228,7 +2228,7 @@
# Extract the first word of "makeinfo", so it can be a program name with args.
set dummy makeinfo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2232: checking for $ac_word" >&5
+echo "configure:2221: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2257,13 +2257,13 @@
if test -n "$MAKEINFO"; then
# Found it, now check the version.
echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:2261: checking for modern makeinfo" >&5
+echo "configure:2250: checking for modern makeinfo" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_prog_version=`$MAKEINFO --version 2>&1 |
sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:2267: version of makeinfo is $ac_prog_version" >&5
+ echo "configure:2256: version of makeinfo is $ac_prog_version" >&5
case $ac_prog_version in
'') gcc_cv_prog_makeinfo_modern=no;;
3.1[2-9] | 3.[2-9][0-9] | 4.* | 1.6[89] | 1.7[0-9])
@@ -2296,12 +2296,12 @@
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:2300: checking for preprocessor stringizing operator" >&5
+echo "configure:2289: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2305 "configure"
+#line 2294 "configure"
#include "confdefs.h"
#define x(y) #y
@@ -2334,12 +2334,12 @@
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:2338: checking for inttypes.h" >&5
+echo "configure:2327: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2343 "configure"
+#line 2332 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
@@ -2347,7 +2347,7 @@
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:2351: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2340: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
@@ -2372,7 +2372,7 @@
# be either signed or unsigned.
#
echo $ac_n "checking for unsigned enumerated bitfields""... $ac_c" 1>&6
-echo "configure:2376: checking for unsigned enumerated bitfields" >&5
+echo "configure:2365: checking for unsigned enumerated bitfields" >&5
if eval "test \"`echo '$''{'gcc_cv_enum_bf_unsigned'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2380,7 +2380,7 @@
gcc_cv_enum_bf_unsigned=yes
else
cat > conftest.$ac_ext <<EOF
-#line 2384 "configure"
+#line 2373 "configure"
#include "confdefs.h"
#include <stdlib.h>
enum t { BLAH = 128 } ;
@@ -2393,7 +2393,7 @@
}
EOF
-if { (eval echo configure:2397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2386: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_enum_bf_unsigned=yes
else
@@ -2421,12 +2421,12 @@
fputs_unlocked getrusage valloc
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2425: checking for $ac_func" >&5
+echo "configure:2414: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2430 "configure"
+#line 2419 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -2449,7 +2449,7 @@
; return 0; }
EOF
-if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -2475,12 +2475,12 @@
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:2479: checking for ssize_t" >&5
+echo "configure:2468: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2484 "configure"
+#line 2473 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -2509,12 +2509,12 @@
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2513: checking for vprintf" >&5
+echo "configure:2502: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2518 "configure"
+#line 2507 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
@@ -2537,7 +2537,7 @@
; return 0; }
EOF
-if { (eval echo configure:2541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2530: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
@@ -2561,12 +2561,12 @@
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2565: checking for _doprnt" >&5
+echo "configure:2554: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2570 "configure"
+#line 2559 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
@@ -2589,7 +2589,7 @@
; return 0; }
EOF
-if { (eval echo configure:2593: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
@@ -2625,7 +2625,7 @@
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2629: checking whether the printf functions support %p" >&5
+echo "configure:2618: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2633,7 +2633,7 @@
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 2637 "configure"
+#line 2626 "configure"
#include "confdefs.h"
#include <stdio.h>
@@ -2646,7 +2646,7 @@
return (p != q);
}
EOF
-if { (eval echo configure:2650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
@@ -2679,12 +2679,12 @@
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2683: checking for pid_t" >&5
+echo "configure:2672: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2688 "configure"
+#line 2677 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -2713,17 +2713,17 @@
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2717: checking for vfork.h" >&5
+echo "configure:2706: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2722 "configure"
+#line 2711 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2727: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -2748,18 +2748,18 @@
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2752: checking for working vfork" >&5
+echo "configure:2741: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2758: checking for vfork" >&5
+echo "configure:2747: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2763 "configure"
+#line 2752 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
@@ -2782,7 +2782,7 @@
; return 0; }
EOF
-if { (eval echo configure:2786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2775: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
@@ -2804,7 +2804,7 @@
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 2808 "configure"
+#line 2797 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
@@ -2899,7 +2899,7 @@
}
}
EOF
-if { (eval echo configure:2903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
@@ -2925,17 +2925,17 @@
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2929: checking for $ac_hdr" >&5
+echo "configure:2918: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2934 "configure"
+#line 2923 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2939: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2928: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -2964,12 +2964,12 @@
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2968: checking for $ac_func" >&5
+echo "configure:2957: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2973 "configure"
+#line 2962 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -2992,7 +2992,7 @@
; return 0; }
EOF
-if { (eval echo configure:2996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -3017,7 +3017,7 @@
done
echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
-echo "configure:3021: checking for working mmap from /dev/zero" >&5
+echo "configure:3010: checking for working mmap from /dev/zero" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_anywhere'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -3025,7 +3025,7 @@
ac_cv_func_mmap_anywhere=no
else
cat > conftest.$ac_ext <<EOF
-#line 3029 "configure"
+#line 3018 "configure"
#include "confdefs.h"
/* Test by Richard Henderson and Alexandre Oliva.
@@ -3097,7 +3097,7 @@
exit(0);
}
EOF
-if { (eval echo configure:3101: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_anywhere=yes
else
@@ -3120,7 +3120,7 @@
fi
echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:3124: checking for working mmap of a file" >&5
+echo "configure:3113: checking for working mmap of a file" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -3135,7 +3135,7 @@
ac_cv_func_mmap_file=no
else
cat > conftest.$ac_ext <<EOF
-#line 3139 "configure"
+#line 3128 "configure"
#include "confdefs.h"
/* Test by Zack Weinberg. Modified from MMAP_ANYWHERE test by
@@ -3172,7 +3172,7 @@
exit(0);
}
EOF
-if { (eval echo configure:3176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_file=yes
else
@@ -3205,12 +3205,12 @@
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3209: checking whether $ac_func is declared" >&5
+echo "configure:3198: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3214 "configure"
+#line 3203 "configure"
#include "confdefs.h"
#include "gansidecl.h"
#include "system.h"
@@ -3221,7 +3221,7 @@
#endif
; return 0; }
EOF
-if { (eval echo configure:3225: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3214: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
@@ -3326,12 +3326,12 @@
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3330: checking whether $ac_func is declared" >&5
+echo "configure:3319: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3335 "configure"
+#line 3324 "configure"
#include "confdefs.h"
#include "gansidecl.h"
#include "system.h"
@@ -3346,7 +3346,7 @@
#endif
; return 0; }
EOF
-if { (eval echo configure:3350: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3339: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
@@ -3389,12 +3389,12 @@
# mkdir takes a single argument on some systems.
echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:3393: checking if mkdir takes one argument" >&5
+echo "configure:3382: checking if mkdir takes one argument" >&5
if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3398 "configure"
+#line 3387 "configure"
#include "confdefs.h"
#include <sys/types.h>
@@ -3411,7 +3411,7 @@
mkdir ("foo", 0);
; return 0; }
EOF
-if { (eval echo configure:3415: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3404: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_mkdir_takes_one_arg=no
else
@@ -6896,7 +6896,7 @@
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:6900: checking for strerror in -lcposix" >&5
+echo "configure:6889: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -6904,7 +6904,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6908 "configure"
+#line 6897 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -6915,7 +6915,7 @@
strerror()
; return 0; }
EOF
-if { (eval echo configure:6919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6908: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -6938,12 +6938,12 @@
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6942: checking for working const" >&5
+echo "configure:6931: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6947 "configure"
+#line 6936 "configure"
#include "confdefs.h"
int main() {
@@ -6992,7 +6992,7 @@
; return 0; }
EOF
-if { (eval echo configure:6996: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6985: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
@@ -7013,21 +7013,21 @@
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:7017: checking for inline" >&5
+echo "configure:7006: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 7024 "configure"
+#line 7013 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:7031: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7020: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
@@ -7053,12 +7053,12 @@
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:7057: checking for off_t" >&5
+echo "configure:7046: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7062 "configure"
+#line 7051 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -7086,12 +7086,12 @@
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:7090: checking for size_t" >&5
+echo "configure:7079: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7095 "configure"
+#line 7084 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
@@ -7121,19 +7121,19 @@
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:7125: checking for working alloca.h" >&5
+echo "configure:7114: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7130 "configure"
+#line 7119 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:7137: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
@@ -7154,12 +7154,12 @@
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:7158: checking for alloca" >&5
+echo "configure:7147: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7163 "configure"
+#line 7152 "configure"
#include "confdefs.h"
#ifdef __GNUC__
@@ -7187,7 +7187,7 @@
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:7191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
@@ -7219,12 +7219,12 @@
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:7223: checking whether alloca needs Cray hooks" >&5
+echo "configure:7212: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7228 "configure"
+#line 7217 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
@@ -7249,12 +7249,12 @@
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7253: checking for $ac_func" >&5
+echo "configure:7242: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7258 "configure"
+#line 7247 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -7277,7 +7277,7 @@
; return 0; }
EOF
-if { (eval echo configure:7281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -7304,7 +7304,7 @@
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:7308: checking stack direction for C alloca" >&5
+echo "configure:7297: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -7312,7 +7312,7 @@
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 7316 "configure"
+#line 7305 "configure"
#include "confdefs.h"
find_stack_direction ()
{
@@ -7331,7 +7331,7 @@
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:7335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
@@ -7358,17 +7358,17 @@
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7362: checking for $ac_hdr" >&5
+echo "configure:7351: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7367 "configure"
+#line 7356 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7372: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -7398,12 +7398,12 @@
strdup __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7402: checking for $ac_func" >&5
+echo "configure:7391: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7407 "configure"
+#line 7396 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -7426,7 +7426,7 @@
; return 0; }
EOF
-if { (eval echo configure:7430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -7455,12 +7455,12 @@
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7459: checking for $ac_func" >&5
+echo "configure:7448: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7464 "configure"
+#line 7453 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -7483,7 +7483,7 @@
; return 0; }
EOF
-if { (eval echo configure:7487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -7517,19 +7517,19 @@
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:7521: checking for LC_MESSAGES" >&5
+echo "configure:7510: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7526 "configure"
+#line 7515 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:7533: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7522: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
@@ -7550,7 +7550,7 @@
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:7554: checking whether NLS is requested" >&5
+echo "configure:7543: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
@@ -7570,7 +7570,7 @@
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:7574: checking whether included gettext is requested" >&5
+echo "configure:7563: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
@@ -7589,17 +7589,17 @@
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:7593: checking for libintl.h" >&5
+echo "configure:7582: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7598 "configure"
+#line 7587 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7603: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7592: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -7616,19 +7616,19 @@
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:7620: checking for gettext in libc" >&5
+echo "configure:7609: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7625 "configure"
+#line 7614 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:7632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
@@ -7644,7 +7644,7 @@
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:7648: checking for bindtextdomain in -lintl" >&5
+echo "configure:7637: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -7652,7 +7652,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7656 "configure"
+#line 7645 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -7663,7 +7663,7 @@
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:7667: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -7679,12 +7679,12 @@
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:7683: checking for gettext in libintl" >&5
+echo "configure:7672: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:7688: checking for gettext in -lintl" >&5
+echo "configure:7677: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -7692,7 +7692,7 @@
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7696 "configure"
+#line 7685 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -7703,7 +7703,7 @@
gettext()
; return 0; }
EOF
-if { (eval echo configure:7707: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -7742,7 +7742,7 @@
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7746: checking for $ac_word" >&5
+echo "configure:7735: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -7776,12 +7776,12 @@
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7780: checking for $ac_func" >&5
+echo "configure:7769: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7785 "configure"
+#line 7774 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
@@ -7804,7 +7804,7 @@
; return 0; }
EOF
-if { (eval echo configure:7808: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7797: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
@@ -7831,7 +7831,7 @@
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7835: checking for $ac_word" >&5
+echo "configure:7824: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -7867,7 +7867,7 @@
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7871: checking for $ac_word" >&5
+echo "configure:7860: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -7899,7 +7899,7 @@
fi
cat > conftest.$ac_ext <<EOF
-#line 7903 "configure"
+#line 7892 "configure"
#include "confdefs.h"
int main() {
@@ -7907,7 +7907,7 @@
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:7911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
@@ -7930,7 +7930,7 @@
if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:7934: checking whether catgets can be used" >&5
+echo "configure:7923: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then
withval="$with_catgets"
@@ -7943,7 +7943,7 @@
if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:7947: checking for main in -li" >&5
+echo "configure:7936: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -7951,14 +7951,14 @@
ac_save_LIBS="$LIBS"
LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7955 "configure"
+#line 7944 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -7986,12 +7986,12 @@
fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:7990: checking for catgets" >&5
+echo "configure:7979: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7995 "configure"
+#line 7984 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */
@@ -8014,7 +8014,7 @@
; return 0; }
EOF
-if { (eval echo configure:8018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8007: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_catgets=yes"
else
@@ -8036,7 +8036,7 @@
# Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8040: checking for $ac_word" >&5
+echo "configure:8029: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -8072,7 +8072,7 @@
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8076: checking for $ac_word" >&5
+echo "configure:8065: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -8109,7 +8109,7 @@
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8113: checking for $ac_word" >&5
+echo "configure:8102: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -8144,7 +8144,7 @@
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8148: checking for $ac_word" >&5
+echo "configure:8137: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -8202,7 +8202,7 @@
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8206: checking for $ac_word" >&5
+echo "configure:8195: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -8236,7 +8236,7 @@
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8240: checking for $ac_word" >&5
+echo "configure:8229: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -8272,7 +8272,7 @@
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8276: checking for $ac_word" >&5
+echo "configure:8265: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -8365,7 +8365,7 @@
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:8369: checking for catalogs to be installed" >&5
+echo "configure:8358: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in $ALL_LINGUAS; do
case " $LINGUAS " in
@@ -8393,17 +8393,17 @@
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:8397: checking for linux/version.h" >&5
+echo "configure:8386: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8402 "configure"
+#line 8391 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8407: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8396: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
@@ -8469,51 +8469,57 @@
XGETTEXT="AWK='$AWK' \$(SHELL) \$(top_srcdir)/exgettext $XGETTEXT"
-# Windows32 Registry support for specifying GCC installation paths.
-# Check whether --enable-win32-registry or --disable-win32-registry was given.
+case $target_os in
+ *cygwin*)
+ # Windows32 Registry support for specifying GCC installation paths.
+ # Check whether --enable-win32-registry or --disable-win32-registry was given.
if test "${enable_win32_registry+set}" = set; then
enableval="$enable_win32_registry"
:
fi
-
-echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:8482: checking whether windows registry support is requested" >&5
-if test x$enable_win32_registry != xno; then
- cat >> confdefs.h <<\EOF
+
+ echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
+echo "configure:8473: checking whether windows registry support is requested" >&5
+ if test x$enable_win32_registry != xno; then
+ cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
EOF
-
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-# Check if user specified a different registry key.
-case x${enable_win32_registry} in
-x | xyes)
- # default.
- gcc_cv_win32_registry_key="$VERSION"
- ;;
-xno)
- # no registry lookup.
- gcc_cv_win32_registry_key=''
- ;;
-*)
- # user-specified key.
- gcc_cv_win32_registry_key="$enable_win32_registry"
- ;;
-esac
-if test x$enable_win32_registry != xno; then
- echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:8511: checking registry key on windows hosts" >&5
- cat >> confdefs.h <<EOF
+ echo "$ac_t""yes" 1>&6
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+
+ # Check if user specified a different registry key.
+ case x${enable_win32_registry} in
+ x | xyes)
+ # default.
+ gcc_cv_win32_registry_key="$VERSION"
+ ;;
+ xno)
+ # no registry lookup.
+ gcc_cv_win32_registry_key=''
+ ;;
+ *)
+ # user-specified key.
+ gcc_cv_win32_registry_key="$enable_win32_registry"
+ ;;
+ esac
+
+ if test x$enable_win32_registry != xno; then
+ echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
+echo "configure:8502: checking registry key on windows hosts" >&5
+ cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
- echo "$ac_t""$gcc_cv_win32_registry_key" 1>&6
-fi
+ echo "$ac_t""$gcc_cv_win32_registry_key" 1>&6
+ fi
+ ;;
+ *)
+ ;;
+esac
# Get an absolute path to the GCC top-level source directory
holddir=`pwd`
@@ -8701,7 +8707,7 @@
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:8705: checking assembler alignment features" >&5
+echo "configure:8700: checking assembler alignment features" >&5
gcc_cv_as=
gcc_cv_as_alignment_features=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
@@ -8822,7 +8828,7 @@
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:8826: checking assembler subsection support" >&5
+echo "configure:8821: checking assembler subsection support" >&5
gcc_cv_as_subsections=
if test x$gcc_cv_as != x; then
# Check if we have .subsection
@@ -8862,7 +8868,7 @@
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:8866: checking assembler weak support" >&5
+echo "configure:8861: checking assembler weak support" >&5
gcc_cv_as_weak=
if test x$gcc_cv_as != x; then
# Check if we have .weak
@@ -8879,7 +8885,7 @@
echo "$ac_t""$gcc_cv_as_weak" 1>&6
echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:8883: checking assembler hidden support" >&5
+echo "configure:8878: checking assembler hidden support" >&5
gcc_cv_as_hidden=
if test x$gcc_cv_as != x; then
# Check if we have .hidden
@@ -8899,7 +8905,7 @@
case "$target" in
sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:8903: checking assembler .register pseudo-op support" >&5
+echo "configure:8898: checking assembler .register pseudo-op support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -8929,7 +8935,7 @@
case "$tm_file" in
*64*)
echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6
-echo "configure:8933: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
+echo "configure:8928: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -8974,7 +8980,7 @@
if test "x$gcc_cv_as_flags64" != xno; then
echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:8978: checking for assembler offsetable %lo() support" >&5
+echo "configure:8973: checking for assembler offsetable %lo() support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -9013,7 +9019,7 @@
i[34567]86-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:9017: checking assembler instructions" >&5
+echo "configure:9012: checking assembler instructions" >&5
gcc_cv_as_instructions=
if test x$gcc_cv_as != x; then
set "filds fists" "filds mem; fists mem"
@@ -9143,7 +9149,7 @@
# Build a new-libstdc++ system (ie libstdc++-v3)
echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6
-echo "configure:9147: checking for libstdc++ to install" >&5
+echo "configure:9142: checking for libstdc++ to install" >&5
# Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given.
if test "${enable_libstdcxx_v3+set}" = set; then
enableval="$enable_libstdcxx_v3"
@@ -9167,7 +9173,7 @@
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:9171: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:9166: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"