This is the mail archive of the
gcc-bugs@gcc.gnu.org
mailing list for the GCC project.
Re: libstdc++/7372: Contents ofsparc-sun-solaris2.8/sparcv9/libstdc++-v3 not installed
- From: Andrew Pickin <PickinA at logica dot com>
- To: bkoz at gcc dot gnu dot org
- Cc: gcc-bugs at gcc dot gnu dot org
- Date: 25 Jul 2002 10:26:40 +0100
- Subject: Re: libstdc++/7372: Contents ofsparc-sun-solaris2.8/sparcv9/libstdc++-v3 not installed
- References: <20020724233823.14427.qmail@sources.redhat.com>
GNU Make version 3.78.1
My configure command line:
../gcc-3.1/configure --disable-nls --enable-languages=c,c++
--prefix=/home/andrewp/GCC310
config.status:
../gcc-3.1/configure
--with-gcc-version-trigger=/home/andrewp/Build/gcc-3.1/gcc/version.c
--host=sparc-sun-solaris2.8 --disable-nls --enable-threads
--enable-languages=c,c++ --prefix=/home/andrewp/GCC310 --norecursion
I attach the original two make files.
My original workround was stated incorrectly:
The makefile which I changed were
sparc-sun-solaris2.8/libstdc++-v3/Makefile
sparc-sun-solaris2.8/sparcv9/libstdc++-v3/Makefile
I explicitly changed the INSTALL macro to use full explicit path
rather than a relative one.
I believe when the target install-data-local is being made the
Makefiles in sub directories of sparc-sun-solaris2.8/libstdc++-v3
and sparc-sun-solaris2.8/sparcv9/libstdc++-v3 have their value for
INSTALL over-ridden, but since they are subdirectories the relative
path is now incorrect.
AMP
On Thu, 2002-07-25 at 00:38, bkoz@gcc.gnu.org wrote:
> Synopsis: Contents of sparc-sun-solaris2.8/sparcv9/libstdc++-v3 not installed
>
> State-Changed-From-To: open->feedback
> State-Changed-By: bkoz
> State-Changed-When: Wed Jul 24 16:38:22 2002
> State-Changed-Why:
> Are you using gmake (GNU make)? If so, what version? If not, can you see if there is a difference when it is used?
>
> You'll need to supply a complete configure command, and an example of what the Makefile's look like.
>
> Also, INSTALL in particular is not especially important for stuff like the includes, which have their own custom install, which is based on top_source directories, and prefix.
>
>
> http://gcc.gnu.org/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=gcc&pr=7372
>
> This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.
--
Certainly there are things in life that money can't buy,
But it's very funny -- did you ever try buying them without money?
-- Ogden Nash
This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.
# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = ../../../gcc-3.1/libstdc++-v3
top_srcdir = ../../../gcc-3.1/libstdc++-v3
VPATH = ../../../gcc-3.1/libstdc++-v3
prefix = /home/andrewp/GCC310
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/libstdc++
pkglibdir = $(libdir)/libstdc++
pkgincludedir = $(includedir)/libstdc++
top_builddir = .
ACLOCAL = aclocal
AUTOCONF = autoconf
AUTOMAKE = automake
AUTOHEADER = autoheader
INSTALL = ../../../gcc-3.1/libstdc++-v3/../install-sh -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = sparc-sun-solaris2.8
build_triplet = sparc-sun-solaris2.8
host_alias = sparc-sun-solaris2.8
host_triplet = sparc-sun-solaris2.8
target_alias = sparc-sun-solaris2.8
target_triplet = sparc-sun-solaris2.8
AR = ar
AS = /usr/ccs/bin/as
ATOMICITY_INC_SRCDIR = config/cpu/sparc/sparc32/bits
AWK = nawk
BASIC_FILE_H = config/io/basic_file_stdio.h
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = /home/andrewp/Build/GCC310-frigga/gcc/xgcc -B/home/andrewp/Build/GCC310-frigga/gcc/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/bin/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/lib/ -isystem /home/andrewp/GCC310/sparc-sun-solaris2.8/include
CCODECVT_C = config/io/c_io_libio_codecvt.c
CCODECVT_H = config/locale/generic/codecvt_specializations.h
CLOCALE_H = config/locale/generic/c_locale.h
CMESSAGES_H = config/locale/generic/messages_members.h
CPP = /home/andrewp/Build/GCC310-frigga/gcc/xgcc -B/home/andrewp/Build/GCC310-frigga/gcc/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/bin/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/lib/ -isystem /home/andrewp/GCC310/sparc-sun-solaris2.8/include -E
CPU_LIMITS_INC_SRCDIR = config/cpu/generic/bits
CSHADOW_FLAGS =
CSTDIO_H = config/io/c_io_stdio.h
CXX = @CXX@
CXXCPP = /home/andrewp/Build/GCC310-frigga/gcc/xgcc -shared-libgcc -B/home/andrewp/Build/GCC310-frigga/gcc/ -nostdinc++ -L/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/libstdc++-v3/src -L/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/libstdc++-v3/src/.libs -B/home/andrewp/GCC310/sparc-sun-solaris2.8/bin/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/lib/ -isystem /home/andrewp/GCC310/sparc-sun-solaris2.8/include -E
C_INCLUDE_DIR = ${glibcpp_srcdir}/include/c_std
DATADIRNAME = @DATADIRNAME@
DEBUG_FLAGS = -g
DLLTOOL = @DLLTOOL@
EXEEXT =
EXTRA_CXX_FLAGS =
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GENCAT = @GENCAT@
GLIBC21 = @GLIBC21@
GLIBCPP_INCLUDES = -I/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/libstdc++-v3/include/sparc-sun-solaris2.8 -I/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/libstdc++-v3/include
GLIBCPP_IS_CROSS_COMPILING = 0
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
INSTOBJEXT = @INSTOBJEXT@
INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
LIBICONV = @LIBICONV@
LIBIO_INCLUDES =
LIBMATHOBJS = nan.lo copysignf.lo signbit.lo signbitf.lo
LIBMATH_INCLUDES = -I$(top_srcdir)/libmath
LIBSUPCXX_INCLUDES = -I$(top_srcdir)/libsupc++
LIBSUPCXX_PICFLAGS = -prefer-pic
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBUNWIND_FLAG =
LN_S = ln -s
MAINT = #
MAKEINFO = makeinfo
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
OBJDUMP = @OBJDUMP@
OBJEXT = o
OPTIMIZE_CXXFLAGS =
OPT_LDFLAGS =
OS_INC_SRCDIR = config/os/solaris/solaris2.7/bits
PACKAGE = libstdc++
POFILES = @POFILES@
POSUB = @POSUB@
RANLIB = true
SECTION_FLAGS = -ffunction-sections -fdata-sections
SECTION_LDFLAGS =
STRIP = strip
TOPLEVEL_INCLUDES =
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = no
VERSION = 3.1.0
WARN_FLAGS = -Wall -Wno-format -W -Wwrite-strings -Winline
WERROR =
check_msgfmt =
enable_shared = yes
enable_static = yes
glibcpp_CXX = /home/andrewp/Build/GCC310-frigga/gcc/xgcc -shared-libgcc -B/home/andrewp/Build/GCC310-frigga/gcc/ -nostdinc++ -L/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/libstdc++-v3/src -L/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/libstdc++-v3/src/.libs -B/home/andrewp/GCC310/sparc-sun-solaris2.8/bin/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/lib/ -isystem /home/andrewp/GCC310/sparc-sun-solaris2.8/include
glibcpp_MOFILES =
glibcpp_POFILES =
glibcpp_basedir = ../../../gcc-3.1/libstdc++-v3/.././libstdc++-v3
glibcpp_builddir = /home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/libstdc++-v3
glibcpp_localedir = /home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/libstdc++-v3/po/share/locale
glibcpp_prefixdir = /home/andrewp/GCC310
glibcpp_srcdir = /home/andrewp/Build/gcc-3.1/libstdc++-v3
glibcpp_thread_h = gthr-posix.h
glibcpp_toolexecdir = $(libdir)/gcc-lib/$(target_alias)
glibcpp_toolexeclibdir = $(libdir)$(MULTISUBDIR)
gxx_include_dir = $(prefix)/include/g++-v3
ifGNUmake =
libio_la =
libtool_VERSION = 4:0:0
release_VERSION = 3.1.0
toplevel_srcdir = ${top_srcdir}/..
AUTOMAKE_OPTIONS = 1.3 cygnus
MAINT_CHARSET = latin1
SUBDIRS = include libio libmath libsupc++ src po testsuite
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
# Multilib support.
MAKEOVERRIDES =
# Multilib variables.
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS = sparcv9
MULTISUBDIR =
MULTIDO = $(MAKE)
MULTICLEAN = $(MAKE)
# Work around what appears to be a GNU make bug handling MAKEFLAGS
# values defined in terms of make variables, as is the case for CC and
# friends when we are called from the top level Makefile.
AM_MAKEFLAGS = \
"AR_FLAGS=$(AR_FLAGS)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"LDFLAGS=$(LDFLAGS)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"MAKE=$(MAKE)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"PICFLAG=$(PICFLAG)" \
"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"exec_prefix=$(exec_prefix)" \
"infodir=$(infodir)" \
"libdir=$(libdir)" \
"includedir=$(includedir)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)" \
"AR=$(AR)" \
"AS=$(AS)" \
"LD=$(LD)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"PICFLAG=$(PICFLAG)" \
"RANLIB=$(RANLIB)" \
"NM=$(NM)" \
"NM_FOR_BUILD=$(NM_FOR_BUILD)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
"DESTDIR=$(DESTDIR)" \
"WERROR=$(WERROR)"
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = mkcheck testsuite_flags
DIST_COMMON = README ./stamp-h.in ChangeLog Makefile.am Makefile.in \
acconfig.h acinclude.m4 aclocal.m4 config.h.in configure configure.in \
mkcheck.in testsuite_flags.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = gtar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: # Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): # configure.in acinclude.m4
cd $(srcdir) && $(ACLOCAL)
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: #$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
config.h: stamp-h
@if test ! -f $@; then \
rm -f stamp-h; \
$(MAKE) stamp-h; \
else :; fi
stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES= CONFIG_HEADERS=config.h \
$(SHELL) ./config.status
@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.h.in: #$(srcdir)/stamp-h.in
@if test ! -f $@; then \
rm -f $(srcdir)/stamp-h.in; \
$(MAKE) $(srcdir)/stamp-h.in; \
else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
cd $(top_srcdir) && $(AUTOHEADER)
@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
mostlyclean-hdr:
clean-hdr:
distclean-hdr:
-rm -f config.h
maintainer-clean-hdr:
mkcheck: $(top_builddir)/config.status mkcheck.in
cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
testsuite_flags: $(top_builddir)/config.status testsuite_flags.in
cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" != "." || dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
@for file in $(DISTFILES); do \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am:
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-info-am:
install-info: install-info-recursive
all-recursive-am: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
install-exec-am:
install-exec: install-exec-recursive
install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile config.h
all-redirect: all-recursive-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
clean: clean-recursive
distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
-rm -f libtool
distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
install-data-recursive uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-info-am \
install-info all-recursive-am install-exec-am install-exec \
install-data-am install-data install-am install uninstall-am uninstall \
all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean
# These two special 'check-script' rules use the bash script 'mkcheck'
# to do testing. This script is not as portable as the dejagnu test
# harness, and is thus off by default. It does produce interesting
# output however, including various performance analysis items like
# compile time, execution time, and binary size.
check-script: $(top_builddir)/mkcheck
-(chmod + $(top_builddir)/mkcheck; \
cd testsuite; \
/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/libstdc++-v3/mkcheck 0)
check-script-install: $(top_builddir)/mkcheck
-(chmod + $(top_builddir)/mkcheck; \
cd testsuite; \
/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/libstdc++-v3/mkcheck 1)
# These rules are messy, but are hella worth it.
doxygen:
-(srcdir=`cd ${top_srcdir}; pwd`; \
builddir=`pwd`; \
/bin/sh ${srcdir}/docs/doxygen/run_doxygen \
--mode=user $${srcdir} $${builddir})
doxygen-maint:
-(srcdir=`cd ${top_srcdir}; pwd`; \
builddir=`pwd`; \
/bin/sh ${srcdir}/docs/doxygen/run_doxygen \
--mode=maint $${srcdir} $${builddir})
doxygen-man:
-(srcdir=`cd ${top_srcdir}; pwd`; \
builddir=`pwd`; \
/bin/sh ${srcdir}/docs/doxygen/run_doxygen \
--mode=man $${srcdir} $${builddir})
.PHONY: doxygen doxygen-maint doxygen-man
# Multilib Makefile bits.
.PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \
maintainer-clean-multi
all-am: all-multi
install-am: install-multi
mostlyclean-am: mostlyclean-multi
clean-am: clean-multi
distclean-am: distclean-multi
maintainer-clean-am: maintainer-clean-multi
all-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
install-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do
mostlyclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean
clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean
distclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean
maintainer-clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean
# All the machinations with string instantiations messes up the
# automake-generated TAGS rule. Make a simple one here.
TAGS: tags-recursive $(LISP)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# FIXME: There should be an @-sign in front of the `if'.
# Leave out until this is tested a bit more.
multi-do:
if [ -z "$(MULTIDIRS)" ]; then \
true; \
else \
rootpre=`pwd`/; export rootpre; \
srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
compiler="$(CC)"; \
for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
dir=`echo $$i | sed -e 's/;.*$$//'`; \
if [ "$${dir}" = "." ]; then \
true; \
else \
if [ -d ../$${dir}/$${lib} ]; then \
flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(CFLAGS) $${flags}" \
prefix="$(prefix)" \
exec_prefix="$(exec_prefix)" \
GCJFLAGS="$(GCJFLAGS) $${flags}" \
CXXFLAGS="$(CXXFLAGS) $${flags}" \
LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
LDFLAGS="$(LDFLAGS) $${flags}" \
$(DO)); then \
true; \
else \
exit 1; \
fi; \
else true; \
fi; \
fi; \
done; \
fi
# FIXME: There should be an @-sign in front of the `if'.
# Leave out until this is tested a bit more.
multi-clean:
if [ -z "$(MULTIDIRS)" ]; then \
true; \
else \
lib=`pwd | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
for dir in Makefile $(MULTIDIRS); do \
if [ -f ../$${dir}/$${lib}/Makefile ]; then \
if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
then true; \
else exit 1; \
fi; \
else true; \
fi; \
done; \
fi
# Generated automatically from Makefile.in by configure.
# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = /bin/sh
srcdir = ../../../../gcc-3.1/libstdc++-v3
top_srcdir = ../../../../gcc-3.1/libstdc++-v3
VPATH = ../../../../gcc-3.1/libstdc++-v3
prefix = /home/andrewp/GCC310
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/libstdc++
pkglibdir = $(libdir)/libstdc++
pkgincludedir = $(includedir)/libstdc++
top_builddir = .
ACLOCAL = aclocal
AUTOCONF = autoconf
AUTOMAKE = automake
AUTOHEADER = autoheader
INSTALL = ../../../../gcc-3.1/libstdc++-v3/../install-sh -c
INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL_PROGRAM}
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = sparc-sun-solaris2.8
build_triplet = sparc-sun-solaris2.8
host_alias = sparc-sun-solaris2.8
host_triplet = sparc-sun-solaris2.8
target_alias = sparc-sun-solaris2.8
target_triplet = sparc-sun-solaris2.8
AR = ar
AS = /usr/ccs/bin/as
ATOMICITY_INC_SRCDIR = config/cpu/sparc/sparc32/bits
AWK = nawk
BASIC_FILE_H = config/io/basic_file_stdio.h
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = /home/andrewp/Build/GCC310-frigga/gcc/xgcc -B/home/andrewp/Build/GCC310-frigga/gcc/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/bin/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/lib/ -isystem /home/andrewp/GCC310/sparc-sun-solaris2.8/include -m64
CCODECVT_C = config/io/c_io_libio_codecvt.c
CCODECVT_H = config/locale/generic/codecvt_specializations.h
CLOCALE_H = config/locale/generic/c_locale.h
CMESSAGES_H = config/locale/generic/messages_members.h
CPP = /home/andrewp/Build/GCC310-frigga/gcc/xgcc -B/home/andrewp/Build/GCC310-frigga/gcc/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/bin/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/lib/ -isystem /home/andrewp/GCC310/sparc-sun-solaris2.8/include -m64 -E
CPU_LIMITS_INC_SRCDIR = config/cpu/generic/bits
CSHADOW_FLAGS =
CSTDIO_H = config/io/c_io_stdio.h
CXX = @CXX@
CXXCPP = /home/andrewp/Build/GCC310-frigga/gcc/xgcc -shared-libgcc -B/home/andrewp/Build/GCC310-frigga/gcc/ -nostdinc++ -L/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/sparcv9/libstdc++-v3/src -L/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/sparcv9/libstdc++-v3/src/.libs -B/home/andrewp/GCC310/sparc-sun-solaris2.8/bin/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/lib/ -isystem /home/andrewp/GCC310/sparc-sun-solaris2.8/include -m64 -E
C_INCLUDE_DIR = ${glibcpp_srcdir}/include/c_std
DATADIRNAME = @DATADIRNAME@
DEBUG_FLAGS = -g
DLLTOOL = @DLLTOOL@
EXEEXT =
EXTRA_CXX_FLAGS =
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GENCAT = @GENCAT@
GLIBC21 = @GLIBC21@
GLIBCPP_INCLUDES = -I/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/sparcv9/libstdc++-v3/include/sparc-sun-solaris2.8 -I/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/sparcv9/libstdc++-v3/include
GLIBCPP_IS_CROSS_COMPILING = 0
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
INSTOBJEXT = @INSTOBJEXT@
INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
LIBICONV = @LIBICONV@
LIBIO_INCLUDES =
LIBMATHOBJS = nan.lo copysignf.lo signbit.lo signbitf.lo
LIBMATH_INCLUDES = -I$(top_srcdir)/libmath
LIBSUPCXX_INCLUDES = -I$(top_srcdir)/libsupc++
LIBSUPCXX_PICFLAGS = -prefer-pic
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBUNWIND_FLAG =
LN_S = ln -s
MAINT = #
MAKEINFO = makeinfo
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
OBJDUMP = @OBJDUMP@
OBJEXT = o
OPTIMIZE_CXXFLAGS =
OPT_LDFLAGS =
OS_INC_SRCDIR = config/os/solaris/solaris2.7/bits
PACKAGE = libstdc++
POFILES = @POFILES@
POSUB = @POSUB@
RANLIB = true
SECTION_FLAGS = -ffunction-sections -fdata-sections
SECTION_LDFLAGS =
STRIP = strip
TOPLEVEL_INCLUDES =
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = no
VERSION = 3.1.0
WARN_FLAGS = -Wall -Wno-format -W -Wwrite-strings -Winline
WERROR =
check_msgfmt =
enable_shared = yes
enable_static = yes
glibcpp_CXX = /home/andrewp/Build/GCC310-frigga/gcc/xgcc -shared-libgcc -B/home/andrewp/Build/GCC310-frigga/gcc/ -nostdinc++ -L/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/sparcv9/libstdc++-v3/src -L/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/sparcv9/libstdc++-v3/src/.libs -B/home/andrewp/GCC310/sparc-sun-solaris2.8/bin/ -B/home/andrewp/GCC310/sparc-sun-solaris2.8/lib/ -isystem /home/andrewp/GCC310/sparc-sun-solaris2.8/include -m64
glibcpp_MOFILES =
glibcpp_POFILES =
glibcpp_basedir = ../../../../gcc-3.1/libstdc++-v3/.././libstdc++-v3
glibcpp_builddir = /home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/sparcv9/libstdc++-v3
glibcpp_localedir = /home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/sparcv9/libstdc++-v3/po/share/locale
glibcpp_prefixdir = /home/andrewp/GCC310
glibcpp_srcdir = /home/andrewp/Build/gcc-3.1/libstdc++-v3
glibcpp_thread_h = gthr-posix.h
glibcpp_toolexecdir = $(libdir)/gcc-lib/$(target_alias)
glibcpp_toolexeclibdir = $(libdir)$(MULTISUBDIR)
gxx_include_dir = $(prefix)/include/g++-v3
ifGNUmake =
libio_la =
libtool_VERSION = 4:0:0
release_VERSION = 3.1.0
toplevel_srcdir = ${top_srcdir}/..
AUTOMAKE_OPTIONS = 1.3 cygnus
MAINT_CHARSET = latin1
SUBDIRS = include libio libmath libsupc++ src po testsuite
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
# Multilib support.
MAKEOVERRIDES =
# Multilib variables.
MULTISRCTOP =
MULTIBUILDTOP = ../
MULTIDIRS =
MULTISUBDIR = /sparcv9
MULTIDO = true
MULTICLEAN = true
# Work around what appears to be a GNU make bug handling MAKEFLAGS
# values defined in terms of make variables, as is the case for CC and
# friends when we are called from the top level Makefile.
AM_MAKEFLAGS = \
"AR_FLAGS=$(AR_FLAGS)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"LDFLAGS=$(LDFLAGS)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"MAKE=$(MAKE)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"PICFLAG=$(PICFLAG)" \
"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"exec_prefix=$(exec_prefix)" \
"infodir=$(infodir)" \
"libdir=$(libdir)" \
"includedir=$(includedir)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)" \
"AR=$(AR)" \
"AS=$(AS)" \
"LD=$(LD)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"PICFLAG=$(PICFLAG)" \
"RANLIB=$(RANLIB)" \
"NM=$(NM)" \
"NM_FOR_BUILD=$(NM_FOR_BUILD)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
"DESTDIR=$(DESTDIR)" \
"WERROR=$(WERROR)"
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = mkcheck testsuite_flags
DIST_COMMON = README ./stamp-h.in ChangeLog Makefile.am Makefile.in \
acconfig.h acinclude.m4 aclocal.m4 config.h.in configure configure.in \
mkcheck.in testsuite_flags.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = gtar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: # Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): # configure.in acinclude.m4
cd $(srcdir) && $(ACLOCAL)
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: #$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
config.h: stamp-h
@if test ! -f $@; then \
rm -f stamp-h; \
$(MAKE) stamp-h; \
else :; fi
stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES= CONFIG_HEADERS=config.h \
$(SHELL) ./config.status
@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.h.in: #$(srcdir)/stamp-h.in
@if test ! -f $@; then \
rm -f $(srcdir)/stamp-h.in; \
$(MAKE) $(srcdir)/stamp-h.in; \
else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
cd $(top_srcdir) && $(AUTOHEADER)
@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
mostlyclean-hdr:
clean-hdr:
distclean-hdr:
-rm -f config.h
maintainer-clean-hdr:
mkcheck: $(top_builddir)/config.status mkcheck.in
cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
testsuite_flags: $(top_builddir)/config.status testsuite_flags.in
cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" != "." || dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
@for file in $(DISTFILES); do \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am:
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-info-am:
install-info: install-info-recursive
all-recursive-am: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
install-exec-am:
install-exec: install-exec-recursive
install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile config.h
all-redirect: all-recursive-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
clean: clean-recursive
distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
-rm -f libtool
distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
install-data-recursive uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-info-am \
install-info all-recursive-am install-exec-am install-exec \
install-data-am install-data install-am install uninstall-am uninstall \
all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean
# These two special 'check-script' rules use the bash script 'mkcheck'
# to do testing. This script is not as portable as the dejagnu test
# harness, and is thus off by default. It does produce interesting
# output however, including various performance analysis items like
# compile time, execution time, and binary size.
check-script: $(top_builddir)/mkcheck
-(chmod + $(top_builddir)/mkcheck; \
cd testsuite; \
/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/sparcv9/libstdc++-v3/mkcheck 0)
check-script-install: $(top_builddir)/mkcheck
-(chmod + $(top_builddir)/mkcheck; \
cd testsuite; \
/home/andrewp/Build/GCC310-frigga/sparc-sun-solaris2.8/sparcv9/libstdc++-v3/mkcheck 1)
# These rules are messy, but are hella worth it.
doxygen:
-(srcdir=`cd ${top_srcdir}; pwd`; \
builddir=`pwd`; \
/bin/sh ${srcdir}/docs/doxygen/run_doxygen \
--mode=user $${srcdir} $${builddir})
doxygen-maint:
-(srcdir=`cd ${top_srcdir}; pwd`; \
builddir=`pwd`; \
/bin/sh ${srcdir}/docs/doxygen/run_doxygen \
--mode=maint $${srcdir} $${builddir})
doxygen-man:
-(srcdir=`cd ${top_srcdir}; pwd`; \
builddir=`pwd`; \
/bin/sh ${srcdir}/docs/doxygen/run_doxygen \
--mode=man $${srcdir} $${builddir})
.PHONY: doxygen doxygen-maint doxygen-man
# Multilib Makefile bits.
.PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \
maintainer-clean-multi
all-am: all-multi
install-am: install-multi
mostlyclean-am: mostlyclean-multi
clean-am: clean-multi
distclean-am: distclean-multi
maintainer-clean-am: maintainer-clean-multi
all-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
install-multi:
$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do
mostlyclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean
clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean
distclean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean
maintainer-clean-multi:
$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean
# All the machinations with string instantiations messes up the
# automake-generated TAGS rule. Make a simple one here.
TAGS: tags-recursive $(LISP)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: