Jason Merrill [Thu, 29 Sep 2022 17:45:02 +0000 (13:45 -0400)]
c++: fix triviality of class with unsatisfied op=
cxx20_pair is trivially copyable because it has a trivial copy constructor
and only a deleted copy assignment operator; the non-triviality of the
unsatisfied copy assignment overload is not considered.
Harald Anlauf [Tue, 27 Sep 2022 18:54:28 +0000 (20:54 +0200)]
Fortran: error recovery while simplifying intrinsic UNPACK [PR107054]
gcc/fortran/ChangeLog:
PR fortran/107054
* simplify.cc (gfc_simplify_unpack): Replace assert by condition
that terminates simplification when there are not enough elements
in the constructor of argument VECTOR.
gcc/testsuite/ChangeLog:
PR fortran/107054
* gfortran.dg/pr107054.f90: New test.
H.J. Lu [Tue, 27 Sep 2022 23:19:11 +0000 (16:19 -0700)]
i386: Mark XMM4-XMM6 as clobbered by encodekey128/encodekey256
encodekey128 and encodekey256 operations clear XMM4-XMM6. But it is
documented that XMM4-XMM6 are reserved for future usages and software
should not rely upon them being zeroed. Change encodekey128 and
encodekey256 to clobber XMM4-XMM6.
This patch adds -mcpu/-mtune support for the Arm Neoverse V2 core.
This updates the internal references to "demeter", but leaves "demeter" as an
accepted value to -mcpu/-mtune as it appears in the released GCC 12 series.
Bootstrapped and tested on aarch64-none-linux-gnu.
gcc/ChangeLog:
* config/aarch64/aarch64-cores.def (neoverse-v2): New entry.
(demeter): Update tunings to neoversev2.
* config/aarch64/aarch64-tune.md: Regenerate.
* config/aarch64/aarch64.cc (demeter_addrcost_table): Rename to
neoversev2_addrcost_table.
(demeter_regmove_cost): Rename to neoversev2_addrcost_table.
(demeter_advsimd_vector_cost): Rename to neoversev2_advsimd_vector_cost.
(demeter_sve_vector_cost): Rename to neoversev2_sve_vector_cost.
(demeter_scalar_issue_info): Rename to neoversev2_scalar_issue_info.
(demeter_advsimd_issue_info): Rename to neoversev2_advsimd_issue_info.
(demeter_sve_issue_info): Rename to neoversev2_sve_issue_info.
(demeter_vec_issue_info): Rename to neoversev2_vec_issue_info.
Update references to above.
(demeter_vector_cost): Rename to neoversev2_vector_cost.
(demeter_tunings): Rename to neoversev2_tunings.
(aarch64_vec_op_count::rename_cycles_per_iter): Use
neoversev2_sve_issue_info instead of demeter_sve_issue_info.
* doc/invoke.texi (AArch64 Options): Document neoverse-v2.
It turns out that GTY(()) markers in definitions like:
GTY(()) tree scalar_types[NUM_VECTOR_TYPES];
are not effective and are silently ignored. The GTY(()) has
to come after an extern or static.
The externs associated with the SVE ACLE GTY variables are in
aarch64-sve-builtins.h. This file is not in tm_include_list because
we don't want every target-facing file to include it. It therefore
isn't in the list of GC header files either.
In this case that's a blessing in disguise, since the variables
belong to a namespace and gengtype doesn't understand namespaces.
I think the fix is instead to add an extra extern before each
variable declaration, similarly to varasm.cc and vtable-verify.cc.
(This works due to a "using namespace" at the end of the file.)
gcc/
PR target/106491
* config/aarch64/aarch64-sve-builtins.cc (scalar_types)
(acle_vector_types, acle_svpattern, acle_svprfop): Add GTY
markup to (new) extern declarations instead of to the main
definition.
Kewen Lin [Tue, 13 Sep 2022 09:14:23 +0000 (04:14 -0500)]
rs6000: Fix the check of bif argument number [PR104482]
As PR104482 shown, it's one regression about the handlings when
the argument number is more than the one of built-in function
prototype. The new bif support only catches the case that the
argument number is less than the one of function prototype, but
it misses the case that the argument number is more than the one
of function prototype. Because it uses "n != expected_args",
n is updated in
for (n = 0; !VOID_TYPE_P (TREE_VALUE (fnargs)) && n < nargs;
fnargs = TREE_CHAIN (fnargs), n++)
, it's restricted to be less than or equal to expected_args with
the guard !VOID_TYPE_P (TREE_VALUE (fnargs)), so it's wrong.
The fix is to use nargs instead, also move the checking hunk's
location ahead to avoid useless further scanning when the counts
mismatch.
PR target/104482
gcc/ChangeLog:
* config/rs6000/rs6000-c.cc (altivec_resolve_overloaded_builtin): Fix
the equality check for argument number, and move this hunk ahead.
PR105485 exposes that new builtin function framework doesn't handle
unresolved overloaded builtin function well. With new builtin
function support, we don't have builtin info for any overloaded
rs6000_gen_builtins enum, since they are expected to be resolved to
one specific instance. So when function rs6000_gimple_fold_builtin
faces one unresolved overloaded builtin, the access for builtin info
becomes out of bound and gets ICE then.
We should not try to fold one unresolved overloaded builtin there
and as the previous support we should emit one error message during
expansion phase like "unresolved overload for builtin ...".
PR target/105485
gcc/ChangeLog:
* config/rs6000/rs6000-builtin.cc (rs6000_gimple_fold_builtin): Add
the handling for unresolved overloaded builtin function.
(rs6000_expand_builtin): Likewise.
Fix PR target/99184: Wrong cast from double to 16-bit and 32-bit ints
this patch fixed PR target/99184 which incorrectly rounded during 64-bit
(long) double to 16-bit and 32-bit integers.
The patch just removes the respective roundings from
libf7-asm.sx::to_integer and ::to_unsigned. Luckily, LibF7 does nowhere
use respective functions internally, the only user is in libf7.c::f7_exp
which reads
f7_round (qq, qq);
int16_t q = f7_get_s16 (qq);
so that f7_get_s16() operates on an already rounded value, and therefore
this code works unaltered with or without rounding in to_integer.
Ian Lance Taylor [Tue, 13 Sep 2022 17:33:20 +0000 (10:33 -0700)]
runtime: ignore __morestack function in runtime.Callers
Backport from trunk.
We were ignoring all functions starting with "__morestack_", but not
the function "__morestack" itself. Without this change, some tests
such as recover.go started failing recently, though I'm not sure
exactly what changed.
Kewen Lin [Wed, 7 Sep 2022 01:37:57 +0000 (20:37 -0500)]
rs6000/test: Fix empty TU in some cases of effective targets [PR106345]
As the failure of test case gcc.target/powerpc/pr92398.p9-.c in
PR106345 shows, some test sources for some powerpc effective
targets use empty translation unit wrongly. The test sources
could go with options like "-ansi -pedantic-errors", then those
effective target checkings will fail unexpectedly with the
error messages like:
error: ISO C forbids an empty translation unit [-Wpedantic]
This patch is to fix empty TUs with one dummy function definition
accordingly.
PR testsuite/106345
gcc/testsuite/ChangeLog:
* lib/target-supports.exp (check_effective_target_powerpc_sqrt): Add
a function definition to avoid pedwarn about empty translation unit.
(check_effective_target_has_arch_pwr5): Likewise.
(check_effective_target_has_arch_pwr6): Likewise.
(check_effective_target_has_arch_pwr7): Likewise.
(check_effective_target_has_arch_pwr8): Likewise.
(check_effective_target_has_arch_pwr9): Likewise.
(check_effective_target_has_arch_pwr10): Likewise.
(check_effective_target_has_arch_ppc64): Likewise.
(check_effective_target_ppc_float128): Likewise.
(check_effective_target_ppc_float128_insns): Likewise.
(check_effective_target_powerpc_vsx): Likewise.
Although PR106320 affected only the 10 and 11 branches, and the testcase
from there is already correctly accepted on trunk and the 12 branch, we
still should add the testcase to trunk/12 too for inter-branch consistency.
PR libstdc++/106320
libstdc++-v3/ChangeLog:
* testsuite/std/ranges/adaptors/join.cc (test13): New test.
Richard Biener [Wed, 7 Sep 2022 08:44:33 +0000 (10:44 +0200)]
tree-optimization/106860 - fix profile scaling in split_loop
The following fixes a mistake in loop splitting which assumes loop
latches have a single predecessor and that edge is from the exit
test. Instead work from the single exit edge we have to find the
edge towards the latch.
PR tree-optimization/106860
* tree-ssa-loop-split.cc (split_loop): Find the exit to
latch edge from the loop exit edge instead of from the
latch. Verify we're going to find it.
Richard Biener [Fri, 2 Sep 2022 11:36:13 +0000 (13:36 +0200)]
tree-optimization/106809 - compile time hog in VN
The dominated_by_p_w_unex function is prone to high compile time.
With GCC 12 we introduced a VN run for uninit diagnostics which now
runs into a degenerate case with bison generated code. Fortunately
this case is easy to fix with a simple extra check - a more
general fix needs more work.
PR tree-optimization/106809
* tree-ssa-sccvn.cc (dominaged_by_p_w_unex): Check we have
more than one successor before doing extra work.
Jonathan Wakely [Mon, 22 Aug 2022 14:42:17 +0000 (15:42 +0100)]
libstdc++: Fix for explicit copy ctors in <thread> and <future> [PR106695]
When I changed std::thread and std::async to avoid unnecessary move
construction of temporaries, I introduced a regression where types with
an explicit copy constructor could not be passed to std::thread or
std::async. The fix is to add a constructor instead of using aggregate
initialization of an unnamed temporary.
libstdc++-v3/ChangeLog:
PR libstdc++/106695
* include/bits/std_thread.h (thread::_State_impl): Forward
individual arguments to _Invoker constructor.
(thread::_Invoker): Add constructor. Delete copies.
* include/std/future (__future_base::_Deferred_state): Forward
individual arguments to _Invoker constructor.
(__future_base::_Async_state_impl): Likewise.
* testsuite/30_threads/async/106695.cc: New test.
* testsuite/30_threads/thread/106695.cc: New test.
Jonathan Wakely [Mon, 22 Aug 2022 14:16:16 +0000 (15:16 +0100)]
libstdc++: Check for overflow in regex back-reference [PR106607]
Currently we fail to notice integer overflow when parsing a
back-reference expression, or when converting the parsed result from
long to int. This changes the result to be int, so no conversion is
needed, and uses the overflow-checking built-ins to detect an
out-of-range back-reference.
libstdc++-v3/ChangeLog:
PR libstdc++/106607
* include/bits/regex_compiler.tcc (_Compiler::_M_cur_int_value):
Use built-ins to check for integer overflow in back-reference
number.
* testsuite/28_regex/basic_regex/106607.cc: New test.
Peter Bergner [Thu, 1 Sep 2022 02:14:36 +0000 (21:14 -0500)]
rs6000: Don't ICE when we disassemble an MMA variable [PR101322]
When we expand an MMA disassemble built-in with C++ using a pointer that
is cast to a valid MMA type, the type isn't passed down to the expand
machinery and we end up using the base type of the pointer which leads to
an ICE. This patch enforces we always use the correct MMA type regardless
of the pointer type being used.
2022-08-31 Peter Bergner <bergner@linux.ibm.com>
gcc/
PR target/101322
* config/rs6000/rs6000-builtin.cc (rs6000_gimple_fold_mma_builtin):
Enforce the use of a valid MMA pointer type.
gcc/testsuite/
PR target/101322
* g++.target/powerpc/pr101322.C: New test.
cselib: add function to check if SET is redundant [PR106187]
A SET operation that writes memory may have the same value as an
earlier store but if the alias sets of the new and earlier store do
not conflict then the set is not truly redundant. This can happen,
for example, if objects of different types share a stack slot.
To fix this we define a new function in cselib that first checks for
equality and if that is successful then finds the earlier store in the
value history and checks the alias sets.
The routine is used in two places elsewhere in the compiler:
cfgcleanup and postreload.
gcc/ChangeLog:
PR rtl-optimization/106187
* alias.h (mems_same_for_tbaa_p): Declare.
* alias.cc (mems_same_for_tbaa_p): New function.
* dse.cc (record_store): Use it instead of open-coding
alias check.
* cselib.h (cselib_redundant_set_p): Declare.
* cselib.cc: Include alias.h
(cselib_redundant_set_p): New function.
* cfgcleanup.cc: (mark_effect): Use cselib_redundant_set_p instead
of rtx_equal_for_cselib_p.
* postreload.cc (reload_cse_simplify): Use cselib_redundant_set_p.
(reload_cse_noop_set_p): Delete.
Richard Earnshaw [Wed, 11 May 2022 12:08:40 +0000 (13:08 +0100)]
arm: correctly handle misaligned MEMs on MVE [PR105463]
Vector operations in MVE must be aligned to the element size, so if we
are asked for a misaligned move in a wider mode we must recast it to a
form suitable for the known alignment (larger elements have better
address offset ranges, so there is some advantage to using wider
element sizes if possible). Whilst fixing this, also rework the
predicates used for validating operands - the Neon predicates are
not right for MVE.
gcc/ChangeLog:
PR target/105463
* config/arm/mve.md (*movmisalign<mode>_mve_store): Use
mve_memory_operand.
(*movmisalign<mode>_mve_load): Likewise.
* config/arm/vec-common.md (movmisalign<mode>): Convert to generator
form...
(@movmisalign<mode>): ... thus. Use generic predicates and then
rework operands if they are not valid. For MVE rework to a
narrower element size if the alignment is not high enough.
Jakub Jelinek [Thu, 1 Sep 2022 09:07:44 +0000 (11:07 +0200)]
Fix up dump_printf_loc format attribute and adjust uses [PR106782]
As discussed on IRC, the r13-2299-g68c61c2daa1f bug only got missed
because dump_printf_loc had incorrect format attribute and therefore
almost no -Wformat=* checking was performed on it.
3, 0 are suitable for function with (whatever, whatever, const char *, va_list)
arguments, not for (whatever, whatever, const char *, ...), that one should
use 3, 4.
There are 3 spots where the mismatch was worse though, two using %u or %d
for unsigned HOST_WIDE_INT argument and one %T for enum argument (promoted
to int) and this backport just fixes those spots.
2022-09-01 Jakub Jelinek <jakub@redhat.com>
PR other/106782
* tree-vect-slp.cc (vect_print_slp_tree): Use
HOST_WIDE_INT_PRINT_UNSIGNED instead of %u.
* tree-vect-loop.cc (vect_estimate_min_profitable_iters): Use
HOST_WIDE_INT_PRINT_UNSIGNED instead of %d.
* tree-vect-slp-patterns.cc (vect_pattern_validate_optab): Use %G
instead of %T and STMT_VINFO_STMT (SLP_TREE_REPRESENTATIVE (node))
instead of SLP_TREE_DEF_TYPE (node).
Marek Polacek [Mon, 29 Aug 2022 20:54:05 +0000 (16:54 -0400)]
c++: __has_builtin gives the wrong answer [PR106759]
We've supported __is_nothrow_constructible since r11-4386, but
names_builtin_p didn't know about it, so it gave the wrong answer for
#if __has_builtin(__is_nothrow_constructible)
...
#endif
I've tested all C++-only built-ins and only two were missing.
PR c++/106759
gcc/cp/ChangeLog:
* cp-objcp-common.cc (names_builtin_p): Handle RID_IS_NOTHROW_ASSIGNABLE
and RID_IS_NOTHROW_CONSTRUCTIBLE.
Peter Bergner [Sun, 28 Aug 2022 00:44:16 +0000 (19:44 -0500)]
rs6000: Allow conversions of MMA pointer types [PR106017]
GCC incorrectly disables conversions between MMA pointer types, which
are allowed with clang. The original intent was to disable conversions
between MMA types and other other types, but pointer conversions should
have been allowed. The fix is to just remove the MMA pointer conversion
handling code altogether.
H.J. Lu [Thu, 18 Aug 2022 21:17:33 +0000 (14:17 -0700)]
x86: Cast stride to __PTRDIFF_TYPE__ in AMX intrinsics
On 64-bit Windows, long is 32 bits and can't be used as stride in memory
operand when base is a pointer which is 64 bits. Cast stride to
__PTRDIFF_TYPE__, instead of long.
The following patch expands IEEE_CLASS inline in the FE but only for the
powerpc64le-linux IEEE quad real(kind=16), using the __builtin_fpclassify
builtin and explicit check of the MSB mantissa bit in place of missing
__builtin_signbit builtin.
Jakub Jelinek [Wed, 24 Aug 2022 07:57:09 +0000 (09:57 +0200)]
i386: Fix up mode iterators that weren't expanded [PR106721]
Currently, when md file reader sees <something> and something is valid mode
(or code) attribute but which doesn't include case for the current mode
(or code), it just keeps the <something> untouched.
I went through all cases matching <[a-zA-Z] in tmp-mddump.md after make mddump.
One of the cases was related to the V*HF mode additions and there was one typo.
From what I can see, this has been voted in as a DR and as it means
we warn less often than before in -std={gnu,c}++2{0,3} modes or with
-Wvolatile, I wonder if it shouldn't be backported to affected release
branches as well.
2022-08-16 Jakub Jelinek <jakub@redhat.com>
* typeck.cc (cp_build_modify_expr): Implement
P2327R1 - De-deprecating volatile compound operations. Don't warn
for |=, &= or ^= with volatile lhs.
* expr.cc (mark_use) <case MODIFY_EXPR>: Adjust warning wording,
leave out simple.
* g++.dg/cpp2a/volatile1.C: Adjust for de-deprecation of volatile
compound |=, &= and ^= operations.
* g++.dg/cpp2a/volatile3.C: Likewise.
* g++.dg/cpp2a/volatile5.C: Likewise.
Jakub Jelinek [Mon, 15 Aug 2022 11:56:57 +0000 (13:56 +0200)]
ifcvt: Fix up noce_convert_multiple_sets [PR106590]
The following testcase is miscompiled on x86_64-linux.
The problem is in the noce_convert_multiple_sets optimization.
We essentially have:
if (g == 1)
{
g = 1;
f = 23;
}
else
{
g = 2;
f = 20;
}
and for each insn try to create a conditional move sequence.
There is code to detect overlap with the regs used in the condition
and the destinations, so we actually try to construct:
tmp_g = g == 1 ? 1 : 2;
f = g == 1 ? 23 : 20;
g = tmp_g;
which is fine. But, we actually try to create two different
conditional move sequences in each case, seq1 with the whole
(eq (reg/v:HI 82 [ g ]) (const_int 1 [0x1]))
condition and seq2 with cc_cmp
(eq (reg:CCZ 17 flags) (const_int 0 [0]))
to rely on the earlier present comparison. In each case, we
compare the rtx costs and choose the cheaper sequence (seq1 if both
have the same cost).
The problem is that with the skylake tuning,
tmp_g = g == 1 ? 1 : 2;
is actually expanded as
tmp_g = (g == 1) + 1;
in seq1 (which clobbers (reg 17 flags)) and as a cmov in seq2
(which doesn't). The tuning says both have the same cost, so we
pick seq1. Next we check sequences for
f = g == 1 ? 23 : 20; and here the seq2 cmov is cheaper, but it
uses (reg 17 flags) which has been clobbered earlier.
The following patch fixes that by detecting if we in the chosen
sequence clobber some register mentioned in cc_cmp or rev_cc_cmp,
and if yes, arranges for only seq1 (i.e. sequences that emit the
comparison itself) to be used after that.
2022-08-15 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/106590
* ifcvt.cc (check_for_cc_cmp_clobbers): New function.
(noce_convert_multiple_sets_1): If SEQ sets or clobbers any regs
mentioned in cc_cmp or rev_cc_cmp, don't consider seq2 for any
further conditional moves.
Harald Anlauf [Tue, 23 Aug 2022 20:16:14 +0000 (22:16 +0200)]
Fortran: improve error recovery while simplifying size of bad array [PR103694]
gcc/fortran/ChangeLog:
PR fortran/103694
* simplify.cc (simplify_size): The size expression of an array cannot
be simplified if an error occurs while resolving the array spec.
gcc/testsuite/ChangeLog:
PR fortran/103694
* gfortran.dg/pr103694.f90: New test.
Since 256-bit vector integer comparison is under TARGET_AVX2,
and gimple folding for vblendvpd/vblendvps/vpblendvb relies on that.
Restrict gimple fold condition to TARGET_AVX2.
Jonathan Wakely [Tue, 23 Aug 2022 14:46:16 +0000 (15:46 +0100)]
libstdc++: Fix visit<void>(v) for non-void visitors [PR106589]
The optimization for the common case of std::visit forgot to handle the
edge case of passing zero variants to a non-void visitor and converting
the result to void.
libstdc++-v3/ChangeLog:
PR libstdc++/106589
* include/std/variant (__do_visit): Handle is_void<R> for zero
argument case.
* testsuite/20_util/variant/visit_r.cc: Check std::visit<void>(v).
Kewen Lin [Tue, 16 Aug 2022 05:18:51 +0000 (00:18 -0500)]
vect: Don't allow vect_emulated_vector_p type in vectorizable_call [PR106322]
As PR106322 shows, in some cases for some vector type whose
TYPE_MODE is a scalar integral mode instead of a vector mode,
it's possible to obtain wrong target support information when
querying with the scalar integral mode. For example, for the
test case in PR106322, on ppc64 32bit vectorizer gets vector
type "vector(2) short unsigned int" for scalar type "short
unsigned int", its mode is SImode instead of V2HImode. The
target support querying checks umul_highpart optab with SImode
and considers it's supported, then vectorizer further generates
.MULH IFN call for that vector type. Unfortunately it's wrong
to use SImode support for that vector type multiply highpart
here.
This patch is to teach vectorizable_call analysis not to allow
vect_emulated_vector_p type for both vectype_in and vectype_out
as Richi suggested.
PR tree-optimization/106322
gcc/ChangeLog:
* tree-vect-stmts.cc (vectorizable_call): Don't allow
vect_emulated_vector_p type for both vectype_in and vectype_out.
gcc/testsuite/ChangeLog:
* gcc.target/i386/pr106322.c: New test.
* gcc.target/powerpc/pr106322.c: New test.
Kewen.Lin [Tue, 16 Aug 2022 05:24:07 +0000 (00:24 -0500)]
rs6000: Adjust mov optabs for opaque modes [PR103353]
As PR103353 shows, we may want to continue to expand built-in
function __builtin_vsx_lxvp, even if we have already emitted
error messages about some missing required conditions. As
shown in that PR, without one explicit mov optab on OOmode
provided, it would call emit_move_insn recursively.
So this patch is to allow the mov pattern to be generated during
expanding phase if compiler has already seen errors.
PR target/103353
gcc/ChangeLog:
* config/rs6000/mma.md (define_expand movoo): Move TARGET_MMA condition
check to preparation statements and add handlings for !TARGET_MMA.
(define_expand movxo): Likewise.
Jonathan Wakely [Mon, 22 Aug 2022 16:24:27 +0000 (17:24 +0100)]
libstdc++: Document linker option for C++23 <stacktrace> [PR105678]
libstdc++-v3/ChangeLog:
PR libstdc++/105678
* doc/xml/manual/using.xml: Document -lstdc++_libbacktrace
requirement for using std::stacktrace. Also adjust -frtti and
-fexceptions to document non-default (i.e. negative) forms.
* doc/html/*: Regenerate.
Tobias Burnus [Tue, 23 Aug 2022 09:35:01 +0000 (11:35 +0200)]
gcn/mkoffload: Cleanup temporary dbgobj file
The file (suffix ".mkoffload.dbg.o") used to save the dbgobj data
data has to be passed to maybe_unlink for cleanup or -v -save-temps stderr
diagnostic. That was missed before.
This is a partial backport of commit r13-2125, "mkoffload: Cleanup
temporary omp_requires_file", only for GCN's mkoffload and its dbgobj
file as 'omp requires' is not supported on GCC 12 and, hence,
omp_requires_file does not exist on this branch.
gcc/ChangeLog:
* config/gcn/mkoffload.cc (main): Add dbgobj to files_to_cleanup.
git://gcc.gnu.org / gcc.git / log