I have a patch that adds braced initialisers to a GTY structure.
gengtype didn't accept that, because it parsed the "{ ... }" in
" = { ... };" as the end of a statement (as "{ ... }" would be in
a function definition) and so it didn't expect the following ";".
This patch explicitly handles initialiser-like sequences.
Arguably, the parser should also skip redundant ";", but that
feels more like a workaround rather than the real fix.
gcc/
* gengtype-parse.cc (consume_until_comma_or_eos): Parse "= { ... }"
as a probable initializer rather than a probable complete statement.
Richard Biener [Thu, 22 Jun 2023 09:40:46 +0000 (11:40 +0200)]
tree-optimization/96208 - SLP of non-grouped loads
The following extends SLP discovery to handle non-grouped loads
in loop vectorization in the case the same load appears in all
lanes.
Code generation is adjusted to mimick what we do for the case
of single element interleaving (when the load is not unit-stride)
which is already handled by SLP. There are some limits we
run into because peeling for gap cannot cover all cases and
we choose VMAT_CONTIGUOUS. The patch does not try to address
these issues yet.
The main obstacle is that these loads are not
STMT_VINFO_GROUPED_ACCESS and that's a new thing with SLP.
I know from the past that it's not a good idea to make them
grouped. Instead the following massages places to deal
with SLP loads that are not STMT_VINFO_GROUPED_ACCESS.
There's already a testcase testing for the case the PR
is after, just XFAILed, the following adjusts that instead
of adding another.
I do expect to have missed some so I don't plan to push this
on a Friday. Still there may be feedback, so posting this
now.
Bootstrapped and tested on x86_64-unknown-linux-gnu.
PR tree-optimization/96208
* tree-vect-slp.cc (vect_build_slp_tree_1): Allow
a non-grouped load if it is the same for all lanes.
(vect_build_slp_tree_2): Handle not grouped loads.
(vect_optimize_slp_pass::remove_redundant_permutations):
Likewise.
(vect_transform_slp_perm_load_1): Likewise.
* tree-vect-stmts.cc (vect_model_load_cost): Likewise.
(get_group_load_store_type): Likewise. Handle
invariant accesses.
(vectorizable_load): Likewise.
* gcc.dg/vect/slp-46.c: Adjust for new vectorizations.
* gcc.dg/vect/bb-slp-pr65935.c: Adjust.
If mem_addr points to a memory region with less than whole vector size
bytes of accessible memory and k is a mask that would prevent reading
the inaccessible bytes from mem_addr, add UNSPEC_MASKMOV to prevent
it to be transformed to any other whole memory access instructions.
gcc/ChangeLog:
PR rtl-optimization/110237
* config/i386/sse.md (<avx512>_store<mode>_mask): Refine with
UNSPEC_MASKMOV.
(maskstore<mode><avx512fmaskmodelower): Ditto.
(*<avx512>_store<mode>_mask): New define_insn, it's renamed
from original <avx512>_store<mode>_mask.
But the document of mvzeroupper doesn't mention the insertion
required -O2 and above, it may confuse users when they explicitly
use -Os -mvzeroupper.
------------
mvzeroupper
Target Mask(VZEROUPPER) Save
Generate vzeroupper instruction before a transfer of control flow out of
the function.
------------
The patch moves flag_expensive_optimizations && !optimize_size to
ix86_option_override_internal. It makes -mvzeroupper independent of
optimization level, but still keeps the behavior of architecture
tuning(emit_vzeroupper) unchanged.
gcc/ChangeLog:
* config/i386/i386-features.cc (pass_insert_vzeroupper:gate):
Move flag_expensive_optimizations && !optimize_size to ..
* config/i386/i386-options.cc (ix86_option_override_internal):
.. this, it makes -mvzeroupper independent of optimization
level, but still keeps the behavior of architecture
tuning(emit_vzeroupper) unchanged.
gcc/testsuite/ChangeLog:
* gcc.target/i386/avx-vzeroupper-29.c: New testcase.
Juzhe-Zhong [Mon, 26 Jun 2023 12:18:04 +0000 (20:18 +0800)]
RISC-V: Support const vector expansion with step vector with base != 0
Currently, we are able to generate step vector with base == 0:
{ 0, 0, 2, 2, 4, 4, ... }
ASM:
vid
vand
However, we do wrong for step vector with base != 0:
{ 1, 1, 3, 3, 5, 5, ... }
Before this patch, such case will run fail.
After this patch, we are able to pass the testcase and generate the step vector with asm:
vid
vand
vadd
gcc/ChangeLog:
* config/riscv/riscv-v.cc (expand_const_vector): Fix stepped vector
with base != 0.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/rvv/autovec/partial/slp-17.c: New test.
* gcc.target/riscv/rvv/autovec/partial/slp-18.c: New test.
* gcc.target/riscv/rvv/autovec/partial/slp-19.c: New test.
* gcc.target/riscv/rvv/autovec/partial/slp_run-17.c: New test.
* gcc.target/riscv/rvv/autovec/partial/slp_run-18.c: New test.
* gcc.target/riscv/rvv/autovec/partial/slp_run-19.c: New test.
Andrew Pinski [Mon, 26 Jun 2023 22:02:11 +0000 (15:02 -0700)]
docs: Add @cindex for some attributes
While looking for the access attribute,
I tried to find it via the concept index but it was
missing. This patch fixes that and adds one for
interrupt/interrupt_handler too.
Committed as obvious after building the HTML docs
and looking at the resulting concept index page.
gcc/ChangeLog:
* doc/extend.texi (access attribute): Add
cindex for it.
(interrupt/interrupt_handler attribute):
Likewise.
Kyrylo Tkachov [Mon, 26 Jun 2023 16:54:42 +0000 (17:54 +0100)]
aarch64: Use <DWI> instead of <V2XWIDE> in scalar SQRSHRUN pattern
In the scalar pattern for SQRSHRUN it's a bit clearer to use DWI instead of V2XWIDE
to make it more clear that no vector modes are involved.
No behavioural change intended.
Bootstrapped and tested on aarch64-none-linux-gnu.
gcc/ChangeLog:
* config/aarch64/aarch64-simd.md (aarch64_sqrshrun_n<mode>_insn):
Use <DWI> instead of <V2XWIDE>.
(aarch64_sqrshrun_n<mode>): Likewise.
Kyrylo Tkachov [Mon, 26 Jun 2023 16:52:49 +0000 (17:52 +0100)]
aarch64: Clean up some rounding immediate predicates
aarch64_simd_rsra_rnd_imm_vec is now used for more than just RSRA
and accepts more than just vectors so rename it to make it more
truthful.
The aarch64_simd_rshrn_imm_vec is now unused and can be deleted.
No behavioural change intended.
Bootstrapped and tested on aarch64-none-linux-gnu.
Jonathan Wakely [Mon, 26 Jun 2023 13:46:46 +0000 (14:46 +0100)]
libstdc++: Fix std::format for pointers [PR110239]
The formatter for pointers was casting to uint64_t which sign extends a
32-bit pointer and produces a value that won't fit in the provided
buffer. Cast to uintptr_t instead.
There was also a bug in the __parse_integer helper when converting a
wide string to a narrow string in order to use std::from_chars on it.
The function would always try to read 32 characters, even if the format
string was shorter than that. Fix that bug, and remove the constexpr
implementation of __parse_integer by just using __from_chars_alnum
instead of from_chars, because that's usable in constexpr even in
C++20.
libstdc++-v3/ChangeLog:
PR libstdc++/110239
* include/std/format (__format::__parse_integer): Fix buffer
overflow for wide chars.
(formatter<const void*, C>::format): Cast to uintptr_t instead
of uint64_t.
* testsuite/std/format/string.cc: Test too-large widths.
This was recently approved for C++26, but there's no harm in
implementing it unconditionally for C++20 and C++23. As it says in the
paper, it doesn't change the meaning of any valid code. It only enables
things that were previously ill-formed for questionable reasons.
libstdc++-v3/ChangeLog:
* include/bits/iterator_concepts.h (projected): Replace class
template with alias template denoting an ADL-proofed helper.
(incremental_traits<projected<Iter, Proj>>): Remove.
* testsuite/24_iterators/indirect_callable/projected-adl.cc:
New test.
Jonathan Wakely [Fri, 23 Jun 2023 12:50:01 +0000 (13:50 +0100)]
libstdc++: Qualify calls to debug mode helpers
These functions should be qualified to disable unwanted ADL.
The overload of __check_singular_aux for safe iterators was previously
being found by ADL, because it wasn't declared before __check_singular.
Add a declaration so that it can be found by qualified lookup.
libstdc++-v3/ChangeLog:
* include/debug/helper_functions.h (__get_distance)
(__check_singular, __valid_range_aux, __valid_range): Qualify
calls to disable ADL.
(__check_singular_aux(const _Safe_iterator_base*)): Declare
overload that was previously found via ADL.
Andreas Krebbel [Mon, 26 Jun 2023 16:31:53 +0000 (18:31 +0200)]
IBM zSystems: Assume symbols without explicit alignment to be ok
A change we have committed back in 2015 relies on the backend
requested ABI alignment to be applied to ALL symbols by the
middle-end. However, this does not appear to be the case for external
symbols. With this commit we assume all symbols without explicit
alignment to be aligned according to the ABI. That's the behavior we
had before.
This fixes a performance regression caused by the 2015 patch. Since
then the address of external char type symbols have been pushed to the
literal pool, although it is safe to access them with larl (which
requires symbols to reside at even addresses).
gcc/
* config/s390/s390.cc (s390_encode_section_info): Set
SYMBOL_FLAG_SET_NOTALIGN2 only if the symbol has explicitely been
misaligned.
gcc/testsuite/
* gcc.target/s390/larl-1.c: New test.
Jan Hubicka [Mon, 26 Jun 2023 16:29:39 +0000 (18:29 +0200)]
Fix profile of forwarders produced by cd-dce
compiling the testcase from PR109849 (which uses std:vector based stack to
drive a loop) with profile feedbakc leads to profile mismatches introduced by
tree-ssa-dce. This is the new code to produce unified forwarder blocks for
PHIs.
I am not including the testcase itself since
checking it for Invalid sum is probably going to be too fragile and this should
show in our LNT testers. The patch however fixes the mismatch.
Bootstrapped/regtested x86_64-linux and plan to commit it shortly.
Andrew MacLeod [Thu, 22 Jun 2023 14:00:12 +0000 (10:00 -0400)]
Avoid redundant GORI calcuations.
When GORI evaluates a statement, if operand 1 and 2 are both in the
dependency chain, GORI evaluates the name through both operands sequentially
and combines the results.
If either operand is in the dependency chain of the other, this
evaluation will do the same work twice, for questionable gain.
Instead, simple evaluate only the operand which depends on the other
and keep the evaluation linear in time.
* gimple-range-gori.cc (compute_operand1_and_operand2_range):
Check for interdependence between operands 1 and 2.
g:6f19cf7526168f8 extended N-vector to N-vector conversions
to handle cases where an intermediate integer extension or
truncation is needed. This patch adjusts the cost to account
for these intermediate conversions.
gcc/
* tree-vect-stmts.cc (vectorizable_conversion): Take multi_step_cvt
into account when costing non-widening/truncating conversions.
Richard Biener [Mon, 26 Jun 2023 10:51:37 +0000 (12:51 +0200)]
tree-optimization/110381 - preserve SLP permutation with in-order reductions
The following fixes a bug that manifests itself during fold-left
reduction transform in picking not the last scalar def to replace
and thus double-counting some elements. But the underlying issue
is that we merge a load permutation into the in-order reduction
which is of course wrong.
Now, reduction analysis has not yet been performend when optimizing
permutations so we have to resort to check that ourselves.
PR tree-optimization/110381
* tree-vect-slp.cc (vect_optimize_slp_pass::start_choosing_layouts):
Materialize permutes before fold-left reductions.
where endtype is scalar integer but value is a vector type.
In this particular case all is good and we recurse since
two vector lanes is more than 64bits of long long. But still
it compares apples and oranges.
Fixed by appropriately also requiring the type of the
value to be scalar integral.
* varasm.cc (initializer_constant_valid_p_1): Also
constrain the type of value to be scalar integral
before dispatching to narrowing_initializer_constant_valid_p.
Richard Biener [Fri, 23 Jun 2023 08:01:38 +0000 (10:01 +0200)]
Avoid shorten_binary_op on VECTOR_TYPE
When we disallow TYPE_PRECISION on VECTOR_TYPEs it shows that
shorten_binary_op performs some checks on that that are likely
harmless in the end. The following bails out early for
VECTOR_TYPE operations to avoid those questionable checks.
gcc/c-family/
* c-common.cc (shorten_binary_op): Exit early for VECTOR_TYPE
operations.
Richard Biener [Fri, 23 Jun 2023 08:06:08 +0000 (10:06 +0200)]
Fix TYPE_PRECISION use in hashable_expr_equal_p
While the checks look unnecessary they probably are quick and
thus done early. The following avoids using TYPE_PRECISION
on VECTOR_TYPEs by making the code match the comment which
talks about precision and signedness. An alternative would
be to only retain the ERROR_MARK and TYPE_MODE checks or
use TYPE_PRECISION_RAW (but I like that least).
* tree-ssa-scopedtables.cc (hashable_expr_equal_p):
Use element_precision.
Richard Biener [Mon, 26 Jun 2023 09:21:43 +0000 (11:21 +0200)]
tree-optimization/110392 - ICE with predicate analysis
Feeding not optimized IL can result in predicate normalization
to simplify things so a predicate can get true or false. The
following re-orders the early exit in that case to come after
simplification and normalization to take care of that.
PR tree-optimization/110392
* gimple-predicate-analysis.cc (uninit_analysis::is_use_guarded):
Do early exits on true/false predicate only after normalization.
Ju-Zhe Zhong [Mon, 26 Jun 2023 02:32:04 +0000 (10:32 +0800)]
SCCVN: Fix repeating variable name "len"
Line 3292: has variable name "len": tree mask = NULL_TREE, len = NULL_TREE, bias = NULL_TREE;
Line 3349: has variable name "len": HOST_WIDE_INT start = 0, len = 0;
Since they are never used simultaneously, such issue is not recognized for now.
However, I want to add LEN_MASK_{LOAD,STORE} which will need these 2 variables, so fix naming in this path.
Change HOST_WIDE_INT start = 0, len = 0; into HOST_WIDE_INT start = 0, length = 0;
gcc/ChangeLog:
* tree-ssa-sccvn.cc (vn_reference_lookup_3): Change name "len" into
"length".
Roger Sayle [Mon, 26 Jun 2023 08:36:02 +0000 (09:36 +0100)]
i386: New *ashl<dwi3>_doubleword_highpart define_insn_and_split.
This patch contains a pair of (related) optimizations in i386.md that
allow us to generate better code for the example below (this is a step
towards fixing a bugzilla PR, but I've forgotten the number).
__int128 foo64(__int128 x, long long y)
{
__int128 t = (__int128)y << 64;
return x ^ t;
}
The hidden issue is that the RTL currently seen by reload contains
the sign extension of y from DImode to TImode, even though this is
dead (not required) for left shifts by more than WORD_SIZE bits.
What makes this particularly undesirable is that the sign-extension
pattern above requires an additional DImode scratch register, indicated
by the clobber, which unnecessarily increases register pressure.
The proposed solution is to add a define_insn_and_split for such
left shifts (of sign or zero extensions) that only have a non-zero
highpart, where the extension is redundant and eliminated, that can
be split after reload, without scratch registers or early clobbers.
This (late split) exposes a second optimization opportunity where
setting the lowpart to zero can sometimes be combined/simplified with
the following instruction during peephole2.
For the test case above, we previously generated with -O2:
2023-06-26 Roger Sayle <roger@nextmovesoftware.com>
gcc/ChangeLog
* config/i386/i386.md (peephole2): Simplify zeroing a register
followed by an IOR, XOR or PLUS operation on it, into a move.
(*ashl<dwi>3_doubleword_highpart): New define_insn_and_split to
eliminate (and hide from reload) unnecessary word to doubleword
extensions that are followed by left shifts by sufficiently large,
but valid, bit counts.
gcc/testsuite/ChangeLog
* gcc.target/i386/ashldi3-1.c: New 32-bit test case.
* gcc.target/i386/ashlti3-2.c: New 64-bit test case.
liuhongt [Sun, 25 Jun 2023 03:12:29 +0000 (11:12 +0800)]
Use cvt_op to save intermediate type operand instead of "subtle" vec_dest.
When there're multiple operands in vec_oprnds0, vec_dest will be
overwrited to vectype_out, but in multi_step_cvt case, cvt_type is
expected. It caused an ICE when verify_gimple_in_cfg.
gcc/ChangeLog:
PR tree-optimization/110371
PR tree-optimization/110018
* tree-vect-stmts.cc (vectorizable_conversion): Use cvt_op to
save intermediate type operand instead of "subtle" vec_dest
for case NONE.
liuhongt [Sun, 25 Jun 2023 03:35:09 +0000 (11:35 +0800)]
Don't use intermiediate type for FIX_TRUNC_EXPR when ftrapping-math.
> > Hmm, good question. GENERIC has a direct truncation to unsigned char
> > for example, the C standard generally says if the integral part cannot
> > be represented then the behavior is undefined. So I think we should be
> > safe here (0x1.0p32 doesn't fit an int).
>
> We should be following Annex F (unspecified value plus "invalid" exception
> for out-of-range floating-to-integer conversions rather than undefined
> behavior). But we don't achieve that very well at present (see bug 93806
> comments 27-29 for examples of how such conversions produce wobbly
> values).
That would mean guarding this with !flag_trapping_math would be the appropriate
thing to do.
gcc/ChangeLog:
PR tree-optimization/110371
PR tree-optimization/110018
* tree-vect-stmts.cc (vectorizable_conversion): Don't use
intermiediate type for FIX_TRUNC_EXPR when ftrapping-math.
gcc/testsuite/ChangeLog:
* gcc.target/i386/pr110018-1.c: Add -fno-trapping-math to dg-options.
* gcc.target/i386/pr110018-2.c: Ditto.
Hongyu Wang [Sun, 25 Jun 2023 01:50:21 +0000 (09:50 +0800)]
i386: Sync tune_string with arch_string for target attribute arch=*
For function with target attribute arch=*, current logic will set its
tune to -mtune from command line so all target_clones will get same
tuning flags which would affect the performance for each clone. Override
tune with arch if tune was not explicitly specified to get proper tuning
flags for target_clones.
gcc/ChangeLog:
* config/i386/i386-options.cc (ix86_valid_target_attribute_tree):
Override tune_string with arch_string if tune_string is not
explicitly specified.
Iain Buclaw [Mon, 26 Jun 2023 01:24:27 +0000 (03:24 +0200)]
d: Suboptimal codegen for __builtin_expect(cond, false)
Since PR96435, both boolean objects and expressions have been evaluated
in the following way.
(*(ubyte*)&obj_or_expr) & 1
It has been noted that sometimes this can cause the back-end to optimize
in non-obvious ways - in particular with __builtin_expect.
This @safe feature is now restricted to just when reading the value of a
bool field that comes from a union.
PR d/110359
gcc/d/ChangeLog:
* d-convert.cc (convert_for_rvalue): Only apply the @safe boolean
conversion to boolean fields of a union.
(convert_for_condition): Call convert_for_rvalue in the default case.
Juzhe-Zhong [Sun, 25 Jun 2023 08:39:52 +0000 (16:39 +0800)]
RISC-V: Enable len_mask{load, store} and remove len_{load, store}
This patch enable len_mask_{load,store} to support flow-control in RVV auto-vectorization.
Consider this following case:
void
f (int32_t *__restrict a,
int32_t *__restrict b,
int32_t *__restrict cond,
int n)
{
for (int i = 0; i < n; i++)
if (cond[i])
a[i] = b[i];
}
Before this patch:
<source>:9:21: missed: couldn't vectorize loop
<source>:9:21: missed: not vectorized: control flow in loop.
After this patch:
f:
ble a3,zero,.L5
.L3:
vsetvli a5,a3,e32,m1,ta,ma
vle32.v v0,0(a2)
vsetvli a6,zero,e32,m1,ta,ma
slli a4,a5,2
vmsne.vi v0,v0,0
sub a3,a3,a5
vsetvli zero,a5,e32,m1,ta,ma
vle32.v v1,0(a1),v0.t
vse32.v v1,0(a0),v0.t
add a2,a2,a4
add a1,a1,a4
add a0,a0,a4
bne a3,zero,.L3
.L5:
ret
gcc/ChangeLog:
* config/riscv/autovec.md (len_load_<mode>): Remove.
(len_maskload<mode><vm>): Remove.
(len_store_<mode>): New pattern.
(len_maskstore<mode><vm>): New pattern.
* config/riscv/predicates.md (autovec_length_operand): New predicate.
* config/riscv/riscv-protos.h (enum insn_type): New enum.
(expand_load_store): New function.
* config/riscv/riscv-v.cc (emit_vlmax_masked_insn): Ditto.
(emit_nonvlmax_masked_insn): Ditto.
(expand_load_store): Ditto.
* config/riscv/riscv-vector-builtins.cc
(function_expander::use_contiguous_store_insn): Add avl_type operand
into pred_store.
* config/riscv/vector.md: Ditto.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/rvv/autovec/partial/single_rgroup-2.c: New test.
* gcc.target/riscv/rvv/autovec/partial/single_rgroup-2.h: New test.
* gcc.target/riscv/rvv/autovec/partial/single_rgroup-3.c: New test.
* gcc.target/riscv/rvv/autovec/partial/single_rgroup-3.h: New test.
* gcc.target/riscv/rvv/autovec/partial/single_rgroup_run-2.c: New test.
* gcc.target/riscv/rvv/autovec/partial/single_rgroup_run-3.c: New test.
Iain Sandoe [Sat, 17 Jun 2023 14:27:39 +0000 (15:27 +0100)]
configure, Darwin: Ensure overrides to host-pie are passed to gcc configure.
The latest versions of Darwin on the Aarch64 platform mandate PIE executables.
On x86_64 it remains optional, but produces tool warnings after Darwin20, so
we default to PIE executables there too.
All (non-PowerPC) 64b Darwin platforms mandate PIC code and therefore force
host_shared on (we issue a diagnostic if the user tries to configure them
non-shared).
However, this also means we cannot test the host_shared setting independently
of the host_pie setting so that the logic for setting PICFLAG must be amended
for Darwin.
For Darwin versions required to have PIE executables, in the event that the
user tries to configure these as --disable-host-pie, we issue a warning and
override the setting. These versions must also switch host_pie on even if it
is not given in the configure line. To cater for this we pass the current
value of host_pie, as determined by top-level configure, to the GCC configure.
* Makefile.def: Pass the enable-host-pie value to GCC configure.
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac: Adjust the logic for shared and PIE host flags to
ensure that PIE is passed for hosts that require it.
Pan Li [Sun, 25 Jun 2023 07:26:08 +0000 (15:26 +0800)]
Revert "RISC-V:Add float16 tuple type support"
This reverts commit 8a96f240d71d367a2955ab9e0f0fef3a0b0e2a74 due to
bootstrap failure on mode out of range access, will commit this patch
after the issue addressed.
liuhongt [Tue, 20 Jun 2023 07:41:00 +0000 (15:41 +0800)]
Refine maskloadmn pattern with UNSPEC_MASKLOAD.
If mem_addr points to a memory region with less than whole vector size
bytes of accessible memory and k is a mask that would prevent reading
the inaccessible bytes from mem_addr, add UNSPEC_MASKLOAD to prevent
it to be transformed to vpblendd.
gcc/ChangeLog:
PR target/110309
* config/i386/sse.md (maskload<mode><avx512fmaskmodelower>):
Refine pattern with UNSPEC_MASKLOAD.
(maskload<mode><avx512fmaskmodelower>): Ditto.
(*<avx512>_load<mode>_mask): Extend mode iterator to
VI12HFBF_AVX512VL.
(*<avx512>_load<mode>): Ditto.
Roger Sayle [Sat, 24 Jun 2023 22:05:25 +0000 (23:05 +0100)]
i386: Add alternate representation for {and,or,xor}b %ah,%dh.
A patch that I'm working on to improve RTL simplifications in the
middle-end results in the regression of pr78904-1b.c, due to changes in
the canonical representation of high-byte (%ah, %bh, %ch, %dh) logic.
See also PR target/78904.
This patch avoids/prevents those failures by adding support for the
alternate representation, duplicating the existing *<code>qi_ext<mode>_2
as *<code>qi_ext<mode>_3 (the new version also replacing any_or with
any_logic to provide *andqi_ext<mode>_3 in the same pattern). Removing
the original pattern isn't trivial, as it's generated by define_split,
but this can be investigated after the other pieces are approved.
The current representation of this instruction is:
Ian Lance Taylor [Thu, 22 Jun 2023 00:27:39 +0000 (17:27 -0700)]
compiler, libgo: support bootstrapping gc compiler
In the Go 1.21 release the package internal/profile imports
internal/lazyregexp. That works when bootstrapping with Go 1.17,
because that compiler has internal/lazyregep and permits importing it.
We also have internal/lazyregexp in libgo, but since it is not installed
it is not available for importing. This CL adds internal/lazyregexp
to the list of internal packages that are installed for bootstrapping.
The Go 1.21, and earlier, releases have a couple of functions in
the internal/abi package that are always fully intrinsified.
The gofrontend recognizes and intrinsifies those functions as well.
However, the gofrontend was also building function descriptors
for references to the functions without calling them, which
failed because there was nothing to refer to. That is OK for the
gc compiler, which guarantees that the functions are only called,
not referenced. This CL arranges to not generate function descriptors
for these functions.
Marek Polacek [Thu, 22 Jun 2023 20:56:26 +0000 (16:56 -0400)]
c++: Add support for -std={c,gnu}++2{c,6}
It seems prudent to add C++26 now that the first C++26 papers have been
approved. I followed commit r11-6920 as well as r8-3237.
Since C++23 is essentially finished and its __cplusplus value has
settled to 202302L, I've updated cpp_init_builtins and marked
-std=c++2b Undocumented and made -std=c++23 no longer Undocumented.
I've verified the patch with a simple test, exercising the new
directives. Don't forget to update your GXX_TESTSUITE_STDS!
This patch does not add -Wc++26-extensions.
gcc/c-family/ChangeLog:
* c-common.h (cxx_dialect): Add cxx26 as a dialect.
* c-opts.cc (set_std_cxx26): New.
(c_common_handle_option): Set options when -std={c,gnu}++2{c,6} is
enabled.
(c_common_post_options): Adjust comments.
* c.opt: Add options for -std=c++26, std=c++2c, -std=gnu++26,
and -std=gnu++2c.
(std=c++2b): Mark as Undocumented.
(std=c++23): No longer Undocumented.
gcc/ChangeLog:
* doc/cpp.texi (__cplusplus): Document value for -std=c++26 and
-std=gnu++26. Document that for C++23, its value is 202302L.
* doc/invoke.texi: Document -std=c++26 and -std=gnu++26.
* dwarf2out.cc (highest_c_language): Handle GNU C++26.
(gen_compile_unit_die): Likewise.
libcpp/ChangeLog:
* include/cpplib.h (c_lang): Add CXX26 and GNUCXX26.
* init.cc (lang_defaults): Add rows for CXX26 and GNUCXX26.
(cpp_init_builtins): Set __cplusplus to 202400L for C++26.
Set __cplusplus to 202302L for C++23.
gcc/testsuite/ChangeLog:
* lib/target-supports.exp (check_effective_target_c++23): Return
1 also if check_effective_target_c++26.
(check_effective_target_c++23_down): New.
(check_effective_target_c++26_only): New.
(check_effective_target_c++26): New.
* g++.dg/cpp23/cplusplus.C: Adjust expected value.
* g++.dg/cpp26/cplusplus.C: New test.
Jan Hubicka [Fri, 23 Jun 2023 16:45:42 +0000 (18:45 +0200)]
Tiny phiprop compile time optimization
gcc/ChangeLog:
* tree-ssa-phiprop.cc (propagate_with_phi): Compute post dominators on
demand.
(pass_phiprop::execute): Do not compute it here; return
update_ssa_only_virtuals if something changed.
(pass_data_phiprop): Remove TODO_update_ssa from todos.
Michael Meissner [Fri, 23 Jun 2023 15:32:39 +0000 (11:32 -0400)]
Fix power10 fusion bug with prefixed loads, PR target/105325
This changes fixes PR target/105325. PR target/105325 is a bug where an
invalid lwa instruction is generated due to power10 fusion of a load
instruction to a GPR and an compare immediate instruction with the immediate
being -1, 0, or 1.
In some cases, when the load instruction is done, the GCC compiler would
generate a load instruction with an offset that was too large to fit into the
normal load instruction.
In particular, loads from the stack might originally have a small offset, so
that the load is not a prefixed load. However, after the stack is set up, and
register allocation has been done, the offset now is large enough that we would
have to use a prefixed load instruction.
The support for prefixed loads did not consider that patterns with a fused load
and compare might have a prefixed address. Without this support, the proper
prefixed load won't be generated.
In the original code, when the split2 pass is run after reload has finished the
ds_form_mem_operand predicate that was used for lwa and ld no longer returns
true. When the pattern was created, ds_form_mem_operand recognized the insn as
being valid since the offset was small. But after register allocation,
ds_form_mem_operand did not return true. Because it didn't return true, the
insn could not be split. Since the insn was not split and the prefix support
did not indicate a prefixed instruction was used, the wrong load is generated.
The solution involves:
1) Don't use ds_form_mem_operand for ld and lwa, always use
non_update_memory_operand.
2) Delete ds_form_mem_operand since it is no longer used.
3) Use the "YZ" constraints for ld/lwa instead of "m".
4) If we don't need to sign extend the lwa, convert it to lwz, and use
cmpwi instead of cmpdi. Adjust the insn name to reflect the code
generate.
5) Insure that the insn using lwa will be recognized as having a prefixed
operand (and hence the insn length will be 16 bytes instead of 8
bytes).
5a) Set the prefixed and maybe_prefix attributes to know that
fused_load_cmpi are also load insns;
5b) In the case where we are just setting CC and not using the memory
afterward, set the clobber to use a DI register, and put an
explicit sign_extend operation in the split;
5c) Set the sign_extend attribute to "yes" for lwa.
5d) 5a-5c are the things that prefixed_load_p in rs6000.cc checks to
ensure that lwa is treated as a ds-form instruction and not as
a d-form instruction (i.e. lwz).
6) Add a new test case for this case.
7) Adjust the insn counts in fusion-p10-ldcmpi.c. Because we are no
longer using ds_form_mem_operand, the ld and lwa instructions will fuse
x-form (reg+reg) addresses in addition ds-form (reg+offset or reg).
2023-06-23 Michael Meissner <meissner@linux.ibm.com>
gcc/
PR target/105325
* config/rs6000/genfusion.pl (gen_ld_cmpi_p10_one): Fix problems that
allowed prefixed lwa to be generated.
* config/rs6000/fusion.md: Regenerate.
* config/rs6000/predicates.md (ds_form_mem_operand): Delete.
* config/rs6000/rs6000.md (prefixed attribute): Add support for load
plus compare immediate fused insns.
(maybe_prefixed): Likewise.
where the lowpart SUBREG has difficulty seeing through the (hi<<64)
that the lowpart must be zero. Rather than workaround this in the
backend, the better fix is to teach simplify-rtx that
lowpart((hi<<64)|lo) -> lo and highpart((hi<<64)|lo) -> hi, so that
all backends benefit. Reducing the number of places where the
middle-end generates a SUBREG of something other than REG is a
good thing.
On x86_64-pc-linux-gnu, the testcase pr78904-1b.c FAILs with this patch,
due to changes in expected/canonical RTL, for which a backend patch to
i386.md has already been provisionally approved.
2023-06-23 Roger Sayle <roger@nextmovesoftware.com>
gcc/ChangeLog
* simplify-rtx.cc (simplify_subreg): Optimize lowpart SUBREGs
of ASHIFT to const0_rtx with sufficiently large shift count.
Optimize highpart SUBREGs of ASHIFT as the shift operand when
the shift count is the correct offset. Optimize SUBREGs of
multi-word logic operations if the SUBREGs of both operands
can be simplified.
Richard Biener [Fri, 23 Jun 2023 10:50:50 +0000 (12:50 +0200)]
Fix initializer_constant_valid_p_1 TYPE_PRECISION use
initializer_constant_valid_p_1 is letting through all conversions
of float vector types that have the same number of elements but
that's of course not valid. The following restricts the code
to scalar floating point types as was probably intended (only
scalar integer types are handled as well).
* varasm.cc (initializer_constant_valid_p_1): Only
allow conversions between scalar floating point types.
Richard Biener [Fri, 23 Jun 2023 10:48:36 +0000 (12:48 +0200)]
Deal with vector typed operands in conversions
The following avoids using TYPE_PRECISION on VECTOR_TYPE when
looking for bit-precision changes in vectorizable_assignment.
We didn't anticipate a stmt like
gcc/ChangeLog:
PR tree-optimization/110280
* match.pd (vec_perm_expr(v, v, mask) -> v): Explicitly build vector
using build_vector_from_val with the element of input operand, and
mask's type if operand and mask's types don't match.
gcc/testsuite/ChangeLog:
PR tree-optimization/110280
* gcc.target/aarch64/sve/pr110280.c: New test.
Richard Biener [Fri, 23 Jun 2023 08:12:24 +0000 (10:12 +0200)]
Fix tree_simple_nonnegative_warnv_p for VECTOR_TYPEs
tree_simple_nonnegative_warnv_p ends up being called on VECTOR_TYPEs
which I think even gets the wrong answer here for tcc_comparison
since vector bools are signed. The following properly guards
that with !VECTOR_TYPE_P.
* fold-const.cc (tree_simple_nonnegative_warnv_p): Guard
the truth_value_p case with !VECTOR_TYPE_P.
The function ends up getting called on VECTOR_TYPEs which it
really isn't prepared for and with the TYPE_PRECISION checking
changes will ICE. The following exits early when the type
to work on isn't scalar integral.
* tree-vect-patterns.cc (vect_look_through_possible_promotion):
Exit early when the type isn't scalar integral.
Richard Biener [Fri, 23 Jun 2023 08:20:45 +0000 (10:20 +0200)]
Use element_precision for match.pd arith conversion optimization
The simplification (outertype)((innertype0)a+(innertype1)b) to
((newtype)a+(newtype)b) ends up using TYPE_PRECISION to check
whether it can elide a conversion but in some paths there can
be VECTOR_TYPEs where this instead compares the number of lanes.
The following fixes the missed optimizations and uses
element_precision in those places.
* match.pd ((outertype)((innertype0)a+(innertype1)b)
-> ((newtype)a+(newtype)b)): Use element_precision
where appropriate.
Richard Biener [Fri, 23 Jun 2023 08:15:27 +0000 (10:15 +0200)]
Bogus and missed folding on vector compares
fold_binary tries to transform (double)float1 CMP (double)float2
into float1 CMP float2 but ends up using TYPE_PRECISION on the
argument types. For vector types that compares the number of
lanes which should be always equal (so it's harmless as to
not generating wrong code). The following instead properly
uses element_precision.
The same happens in the corresponding match.pd pattern.
* fold-const.cc (fold_binary_loc): Use element_precision
when trying (double)float1 CMP (double)float2 to
float1 CMP float2 simplification.
* match.pd: Likewise.
Richard Biener [Fri, 23 Jun 2023 07:28:34 +0000 (09:28 +0200)]
Optimize vector codegen for invariant loads, fix SLP support
The following avoids creating duplicate stmts for invariant loads
which was necessary when the vector stmts were in a linked list.
It also fixes SLP support which didn't correctly create the
appropriate number of copies.
Richard Biener [Thu, 22 Jun 2023 13:14:51 +0000 (15:14 +0200)]
Improve vector_vector_composition_type
We sometimes get to ask to decompose, say V2DFmode into two halves.
Currently this results in composing it from two DImode pieces
instead of the obvious two DFmode pieces. The following adjusts
vector_vector_composition_type for this trivial case and avoids
a VIEW_CONVERT_EXPR in the initial code generation.
* tree-vect-stmts.cc (vector_vector_composition_type):
Handle composition of a vector from a number of elements that
happens to match its number of lanes.
Paul E. Murphy [Thu, 22 Jun 2023 22:57:23 +0000 (17:57 -0500)]
rust: Update usage of TARGET_AIX to TARGET_AIX_OS
This was noticed when fixing the gccgo usage of the macro, the
rust usage is very similar.
TARGET_AIX is defined as a non-zero value on linux/powerpc64le
which may cause unexpected behavior. TARGET_AIX_OS should be
used to toggle AIX specific behavior.
2023-06-22 Paul E. Murphy <murphyp@linux.ibm.com>
gcc/rust/
* rust-object-export.cc [TARGET_AIX]: Rename and update usage to
TARGET_AIX_OS.
Paul E. Murphy [Thu, 22 Jun 2023 22:53:46 +0000 (17:53 -0500)]
go: Update usage of TARGET_AIX to TARGET_AIX_OS
TARGET_AIX is defined to a non-zero value on linux and maybe other
powerpc64le targets. This leads to unexpected behavior such as
dropping the .go_export section when linking a shared library
on linux/powerpc64le.
Instead, use TARGET_AIX_OS to toggle AIX specific behavior.
Fixes golang/go#60798.
2023-06-22 Paul E. Murphy <murphyp@linux.ibm.com>
gcc/go/
* go-backend.cc [TARGET_AIX]: Rename and update usage to TARGET_AIX_OS.
* go-lang.cc: Likewise.
Marek Polacek [Thu, 22 Jun 2023 15:30:01 +0000 (11:30 -0400)]
configure: Implement --enable-host-bind-now
As promised in the --enable-host-pie patch, this patch adds another
configure option, --enable-host-bind-now, which adds -z now when linking
the compiler executables in order to extend hardening. BIND_NOW with RELRO
allows the GOT to be marked RO; this prevents GOT modification attacks.
This option does not affect linking of target libraries; you can use
LDFLAGS_FOR_TARGET=-Wl,-z,relro,-z,now to enable RELRO/BIND_NOW.
With this patch:
$ readelf -Wd cc1{,plus,obj,gm2} f951 lto1 cpp rust1 gnat1 | grep FLAGS
0x000000000000001e (FLAGS) BIND_NOW
0x000000006ffffffb (FLAGS_1) Flags: NOW PIE
0x000000000000001e (FLAGS) BIND_NOW
0x000000006ffffffb (FLAGS_1) Flags: NOW PIE
0x000000000000001e (FLAGS) BIND_NOW
0x000000006ffffffb (FLAGS_1) Flags: NOW PIE
0x000000000000001e (FLAGS) BIND_NOW
0x000000006ffffffb (FLAGS_1) Flags: NOW PIE
0x000000000000001e (FLAGS) BIND_NOW
0x000000006ffffffb (FLAGS_1) Flags: NOW PIE
0x000000000000001e (FLAGS) BIND_NOW
0x000000006ffffffb (FLAGS_1) Flags: NOW PIE
0x000000000000001e (FLAGS) BIND_NOW
0x000000006ffffffb (FLAGS_1) Flags: NOW PIE
0x000000000000001e (FLAGS) BIND_NOW
0x000000006ffffffb (FLAGS_1) Flags: NOW PIE
0x000000000000001e (FLAGS) BIND_NOW
0x000000006ffffffb (FLAGS_1) Flags: NOW PIE
c++tools/ChangeLog:
* configure.ac (--enable-host-bind-now): New check.
* configure: Regenerate.
gcc/ChangeLog:
* configure.ac (--enable-host-bind-now): New check. Add
-Wl,-z,now to LD_PICFLAG if --enable-host-bind-now.
* configure: Regenerate.
* doc/install.texi: Document --enable-host-bind-now.
lto-plugin/ChangeLog:
* configure.ac (--enable-host-bind-now): New check. Link with
-z,now.
* configure: Regenerate.
Di Zhao OS [Thu, 22 Jun 2023 14:16:57 +0000 (15:16 +0100)]
Change fma_reassoc_width tuning for ampere1
This patch enables reassociation of floating-point additions on ampere1.
This brings about 1% overall benefit on spec2017 fprate cases. (There
are minor regressions in 510.parest_r and 508.namd_r, analyzed here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110279 .)
gcc/ChangeLog:
* config/aarch64/aarch64.cc: Change fma_reassoc_width for ampere1.
Tobias Burnus [Thu, 22 Jun 2023 12:57:54 +0000 (14:57 +0200)]
libgomp.texi: Improve OpenMP ICV description
Use @var{} instead of @emph{} - for semantic texinfo formatting; the result
is similar: slanted instead of italic in PDF, still italic in HTML, albeit
in info is is now uppercase instead of '_' as pre/suffix.
The patch also documents the newer _ALL/_DEV/_DEV_<no> env var suffixes
and as it refers to the ICV vars and their scope, those were added to the
OMP_ env vars for reference. For OMP_NESTING, a note that those were
deprecated was added plus a bunch of cross references. For OMP_ALLOCATOR,
add note about the lack of per-device env vars support.
A new section, consisting mostly of cross references was added to document
the implementation-defined ICV initialization, especially as OpenMP demands
that implementations document what they do for 'implementation defined'.
For nvptx, the implementation-defined used stack size was documented
libgomp/
* libgomp.texi: Use @var for ICV vars.
(OpenMP Environment Variables): Mention _ALL/_DEV/_DEV_<no> variants,
document which ICV is set and which scope the ICV has; extend/cleanup
some @ref.
(Implementation-defined ICV Initialization): New.
(nvptx): Document the implementation-defined used per-warp stack size.
Richard Biener [Thu, 22 Jun 2023 07:04:01 +0000 (09:04 +0200)]
tree-optimization/110332 - fix ICE with phiprop
The following fixes an ICE that occurs when we visit an edge
inserted load from the code validating correctness for inserting
an aggregate copy there. We can simply skip those loads here.
Roger Sayle [Thu, 22 Jun 2023 06:43:07 +0000 (07:43 +0100)]
i386: Convert ptestz of pandn into ptestc.
This patch is the next installment in a set of backend patches around
improvements to ptest/vptest. A previous patch optimized the sequence
t=pand(x,y); ptestz(t,t) into the equivalent ptestz(x,y), using the
property that ZF is set to (X&Y) == 0. This patch performs a similar
transformation, converting t=pandn(x,y); ptestz(t,t) into the (almost)
equivalent ptestc(y,x), using the property that the CF flags is set to
(~X&Y) == 0. The tricky bit is that this sets the CF flag instead of
the ZF flag, so we can only perform this transformation when we can
also convert the flags consumer, as well as the producer.
For the test case:
int foo (__m128i x, __m128i y)
{
__m128i a = x & ~y;
return __builtin_ia32_ptestz128 (a, a);
}
foo: xorl %eax, %eax
ptest %xmm0, %xmm1
setc %al
ret
At the same time, this patch also provides alternative fixes for
PR target/109973 and PR target/110118, by recognizing that ptestc(x,x)
always sets the carry flag (X&~X is always zero). This is achieved
both by recognizing the special case in ix86_expand_sse_ptest and with
a splitter to convert an eligible ptest into an stc.
2023-06-22 Roger Sayle <roger@nextmovesoftware.com>
Uros Bizjak <ubizjak@gmail.com>
gcc/ChangeLog
* config/i386/i386-expand.cc (ix86_expand_sse_ptest): Recognize
expansion of ptestc with equal operands as producing const1_rtx.
* config/i386/i386.cc (ix86_rtx_costs): Provide accurate cost
estimates of UNSPEC_PTEST, where the ptest performs the PAND
or PAND of its operands.
* config/i386/sse.md (define_split): Transform CCCmode UNSPEC_PTEST
of reg_equal_p operands into an x86_stc instruction.
(define_split): Split pandn/ptestz/set{n?}e into ptestc/set{n?}c.
(define_split): Similar to above for strict_low_part destinations.
(define_split): Split pandn/ptestz/j{n?}e into ptestc/j{n?}c.
gcc/testsuite/ChangeLog
* gcc.target/i386/avx-vptest-4.c: New test case.
* gcc.target/i386/avx-vptest-5.c: Likewise.
* gcc.target/i386/avx-vptest-6.c: Likewise.
* gcc.target/i386/pr109973-1.c: Update test case.
* gcc.target/i386/pr109973-2.c: Likewise.
* gcc.target/i386/sse4_1-ptest-4.c: New test case.
* gcc.target/i386/sse4_1-ptest-5.c: Likewise.
* gcc.target/i386/sse4_1-ptest-6.c: Likewise.
David Malcolm [Thu, 22 Jun 2023 01:49:00 +0000 (21:49 -0400)]
analyzer: add text-art visualizations of out-of-bounds accesses [PR106626]
This patch extends -Wanalyzer-out-of-bounds so that, where possible, it
will emit a text art diagram visualizing the spatial relationship between
(a) the memory region that the analyzer predicts would be accessed, versus
(b) the range of memory that is valid to access - whether they overlap,
are touching, are close or far apart; which one is before or after in
memory, the relative sizes involved, the direction of the access (read vs
write), and, in some cases, the values of data involved. This diagram
can be suppressed using -fdiagnostics-text-art-charset=none.
demo-2.c: In function ‘test_non_ascii’:
demo-2.c:7:3: warning: stack-based buffer overflow [CWE-121] [-Wanalyzer-out-of-bounds]
7 | strcpy (buf, "文字化け");
| ^~~~~~~~~~~~~~~~~~~~~~~~
‘test_non_ascii’: events 1-2
|
| 6 | char buf[5];
| | ^~~
| | |
| | (1) capacity: 5 bytes
| 7 | strcpy (buf, "文字化け");
| | ~~~~~~~~~~~~~~~~~~~~~~~~
| | |
| | (2) out-of-bounds write from byte 5 till byte 12 but ‘buf’ ends at byte 5
|
demo-2.c:7:3: note: write of 8 bytes to beyond the end of ‘buf’
7 | strcpy (buf, "文字化け");
| ^~~~~~~~~~~~~~~~~~~~~~~~
demo-2.c:7:3: note: valid subscripts for ‘buf’ are ‘[0]’ to ‘[4]’
┌─────┬─────┬─────┬────┬────┐┌────┬────┬────┬────┬────┬────┬────┬──────┐
│ [0] │ [1] │ [2] │[3] │[4] ││[5] │[6] │[7] │[8] │[9] │[10]│[11]│ [12] │
├─────┼─────┼─────┼────┼────┤├────┼────┼────┼────┼────┼────┼────┼──────┤
│0xe6 │0x96 │0x87 │0xe5│0xad││0x97│0xe5│0x8c│0x96│0xe3│0x81│0x91│ 0x00 │
├─────┴─────┴─────┼────┴────┴┴────┼────┴────┴────┼────┴────┴────┼──────┤
│ U+6587 │ U+5b57 │ U+5316 │ U+3051 │U+0000│
├─────────────────┼───────────────┼──────────────┼──────────────┼──────┤
│ 文 │ 字 │ 化 │ け │ NUL │
├─────────────────┴───────────────┴──────────────┴──────────────┴──────┤
│ string literal (type: ‘char[13]’) │
└──────────────────────────────────────────────────────────────────────┘
│ │ │ │ │ │ │ │ │ │ │ │ │
│ │ │ │ │ │ │ │ │ │ │ │ │
v v v v v v v v v v v v v
┌─────┬────────────────┬────┐┌─────────────────────────────────────────┐
│ [0] │ ... │[4] ││ │
├─────┴────────────────┴────┤│ after valid range │
│ ‘buf’ (type: ‘char[5]’) ││ │
└───────────────────────────┘└─────────────────────────────────────────┘
├─────────────┬─────────────┤├────────────────────┬────────────────────┤
│ │
╭────────┴────────╮ ╭───────────┴──────────╮
│capacity: 5 bytes│ │⚠️ overflow of 8 bytes│
╰─────────────────╯ ╰──────────────────────╯
showing that the overflow occurs partway through the UTF-8 encoding of
the U+5b57 code point.
There are lots more examples in the test suite.
It doesn't show up in this email, but the above diagrams are colorized
to constrast the valid and invalid access ranges.
gcc/ChangeLog:
PR analyzer/106626
* Makefile.in (ANALYZER_OBJS): Add analyzer/access-diagram.o.
* doc/invoke.texi (Wanalyzer-out-of-bounds): Add description of
text art.
(fanalyzer-debug-text-art): New.
gcc/analyzer/ChangeLog:
PR analyzer/106626
* access-diagram.cc: New file.
* access-diagram.h: New file.
* analyzer.h (class region_offset): Add default ctor.
(region_offset::make_byte_offset): New decl.
(region_offset::concrete_p): New.
(region_offset::get_concrete_byte_offset): New.
(region_offset::calc_symbolic_bit_offset): New decl.
(region_offset::calc_symbolic_byte_offset): New decl.
(region_offset::dump_to_pp): New decl.
(region_offset::dump): New decl.
(operator<, operator<=, operator>, operator>=): New decls for
region_offset.
* analyzer.opt
(-param=analyzer-text-art-string-ellipsis-threshold=): New.
(-param=analyzer-text-art-string-ellipsis-head-len=): New.
(-param=analyzer-text-art-string-ellipsis-tail-len=): New.
(-param=analyzer-text-art-ideal-canvas-width=): New.
(fanalyzer-debug-text-art): New.
* bounds-checking.cc: Include "intl.h", "diagnostic-diagram.h",
and "analyzer/access-diagram.h".
(class out_of_bounds::oob_region_creation_event_capacity): New.
(out_of_bounds::out_of_bounds): Add "model" and "sval_hint"
params.
(out_of_bounds::mark_interesting_stuff): Use the base region.
(out_of_bounds::add_region_creation_events): Use
oob_region_creation_event_capacity.
(out_of_bounds::get_dir): New pure vfunc.
(out_of_bounds::maybe_show_notes): New.
(out_of_bounds::maybe_show_diagram): New.
(out_of_bounds::make_access_diagram): New.
(out_of_bounds::m_model): New field.
(out_of_bounds::m_sval_hint): New field.
(out_of_bounds::m_region_creation_event_id): New field.
(concrete_out_of_bounds::concrete_out_of_bounds): Update for new
fields.
(concrete_past_the_end::concrete_past_the_end): Likewise.
(concrete_past_the_end::add_region_creation_events): Use
oob_region_creation_event_capacity.
(concrete_buffer_overflow::concrete_buffer_overflow): Update for
new fields.
(concrete_buffer_overflow::emit): Replace call to
maybe_describe_array_bounds with maybe_show_notes.
(concrete_buffer_overflow::get_dir): New.
(concrete_buffer_over_read::concrete_buffer_over_read): Update for
new fields.
(concrete_buffer_over_read::emit): Replace call to
maybe_describe_array_bounds with maybe_show_notes.
(concrete_buffer_overflow::get_dir): New.
(concrete_buffer_underwrite::concrete_buffer_underwrite): Update
for new fields.
(concrete_buffer_underwrite::emit): Replace call to
maybe_describe_array_bounds with maybe_show_notes.
(concrete_buffer_underwrite::get_dir): New.
(concrete_buffer_under_read::concrete_buffer_under_read): Update
for new fields.
(concrete_buffer_under_read::emit): Replace call to
maybe_describe_array_bounds with maybe_show_notes.
(concrete_buffer_under_read::get_dir): New.
(symbolic_past_the_end::symbolic_past_the_end): Update for new
fields.
(symbolic_buffer_overflow::symbolic_buffer_overflow): Likewise.
(symbolic_buffer_overflow::emit): Call maybe_show_notes.
(symbolic_buffer_overflow::get_dir): New.
(symbolic_buffer_over_read::symbolic_buffer_over_read): Update for
new fields.
(symbolic_buffer_over_read::emit): Call maybe_show_notes.
(symbolic_buffer_over_read::get_dir): New.
(region_model::check_symbolic_bounds): Add "sval_hint" param. Pass
it and sized_offset_reg to diagnostics.
(region_model::check_region_bounds): Add "sval_hint" param, passing
it to diagnostics.
* diagnostic-manager.cc
(diagnostic_manager::emit_saved_diagnostic): Pass logger to
pending_diagnostic::emit.
* engine.cc: Add logger param to pending_diagnostic::emit
implementations.
* infinite-recursion.cc: Likewise.
* kf-analyzer.cc: Likewise.
* kf.cc: Likewise. Add nullptr for new param of
check_region_for_write.
* pending-diagnostic.h: Likewise in decl.
* region-model-manager.cc
(region_model_manager::get_or_create_int_cst): Convert param from
poly_int64 to const poly_wide_int_ref &.
(region_model_manager::maybe_fold_binop): Support type being NULL
when checking for floating-point types.
Check for (X + Y) - X => Y. Be less strict about types when folding
associative ops. Check for (X + Y) * CST => (X * CST) + (Y * CST).
* region-model-manager.h
(region_model_manager::get_or_create_int_cst): Convert param from
poly_int64 to const poly_wide_int_ref &.
* region-model.cc: Add logger param to pending_diagnostic::emit
implementations.
(region_model::check_external_function_for_access_attr): Update
for new param of check_region_for_write.
(region_model::deref_rvalue): Use nullptr rather than NULL.
(region_model::get_capacity): Handle RK_STRING.
(region_model::check_region_access): Add "sval_hint" param; pass it to
check_region_bounds.
(region_model::check_region_for_write): Add "sval_hint" param;
pass it to check_region_access.
(region_model::check_region_for_read): Add NULL for new param to
check_region_access.
(region_model::set_value): Pass rhs_sval to
check_region_for_write.
(region_model::get_representative_path_var_1): Handle SK_CONSTANT
in the check for infinite recursion.
* region-model.h (region_model::check_region_for_write): Add
"sval_hint" param.
(region_model::check_region_access): Likewise.
(region_model::check_symbolic_bounds): Likewise.
(region_model::check_region_bounds): Likewise.
* region.cc (region_offset::make_byte_offset): New.
(region_offset::calc_symbolic_bit_offset): New.
(region_offset::calc_symbolic_byte_offset): New.
(region_offset::dump_to_pp): New.
(region_offset::dump): New.
(struct linear_op): New.
(operator<, operator<=, operator>, operator>=): New, for
region_offset.
(region::get_next_offset): New.
(region::get_relative_symbolic_offset): Use ptrdiff_type_node.
(field_region::get_relative_symbolic_offset): Likewise.
(element_region::get_relative_symbolic_offset): Likewise.
(bit_range_region::get_relative_symbolic_offset): Likewise.
* region.h (region::get_next_offset): New decl.
* sm-fd.cc: Add logger param to pending_diagnostic::emit
implementations.
* sm-file.cc: Likewise.
* sm-malloc.cc: Likewise.
* sm-pattern-test.cc: Likewise.
* sm-sensitive.cc: Likewise.
* sm-signal.cc: Likewise.
* sm-taint.cc: Likewise.
* store.cc (bit_range::contains_p): Allow "out" to be null.
* store.h (byte_range::get_start_bit_offset): New.
(byte_range::get_next_bit_offset): New.
* varargs.cc: Add logger param to pending_diagnostic::emit
implementations.
gcc/testsuite/ChangeLog:
PR analyzer/106626
* gcc.dg/analyzer/data-model-1.c (test_16): Update for
out-of-bounds working.
* gcc.dg/analyzer/out-of-bounds-diagram-1-ascii.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-1-debug.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-1-emoji.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-1-json.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-1-sarif.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-1-unicode.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-10.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-11.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-12.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-13.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-14.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-15.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-2.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-3.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-4.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-5-ascii.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-5-unicode.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-6.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-7.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-8.c: New test.
* gcc.dg/analyzer/out-of-bounds-diagram-9.c: New test.
* gcc.dg/analyzer/pattern-test-2.c: Update expected results.
* gcc.dg/analyzer/pr101962.c: Update expected results.
* gcc.dg/plugin/analyzer_gil_plugin.c: Add logger param to
pending_diagnostic::emit implementations.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
David Malcolm [Thu, 22 Jun 2023 01:49:00 +0000 (21:49 -0400)]
diagnostics: add support for "text art" diagrams
Existing text output in GCC has to be implemented by writing
sequentially to a pretty_printer instance. This makes it
hard to implement some kinds of diagnostic output (see e.g.
diagnostic-show-locus.cc).
This patch adds more flexible ways of creating text output:
- a canvas class, which can be "painted" to via random-access (rather
that sequentially)
- a table class for 2D grid layout, supporting items that span
multiple rows/columns
- a widget class for organizing diagrams hierarchically.
The patch also expands GCC's diagnostics subsystem so that diagnostics
can have "text art" diagrams - think ASCII art, but potentially
including some Unicode characters, such as box-drawing chars.
The new code is in a new "gcc/text-art" subdirectory and "text_art"
namespace.
The patch adds a new "-fdiagnostics-text-art-charset=VAL" option, with
values:
- "none": don't emit diagrams (added to -fdiagnostics-plain-output)
- "ascii": use pure ASCII in diagrams
- "unicode": allow for conservative use of unicode drawing characters
(such as box-drawing characters).
- "emoji" (the default): as "unicode", but potentially allow for
conservative use of emoji in the output (such as U+26A0 WARNING SIGN).
I made it possible to disable emoji separately from unicode as I believe
there's a generation gap in acceptance of these characters (some older
programmers have a visceral reaction against them, whereas younger
programmers may have no problem with them).
Diagrams are emitted to stderr by default. With SARIF output they are
captured as a location in "relatedLocations", with the diagram as a
code block in Markdown within a "markdown" property of a message.
This patch doesn't add any such diagram usage to GCC, saving that for
followups, apart from adding a plugin to the test suite to exercise the
functionality.
contrib/ChangeLog:
* unicode/gen-box-drawing-chars.py: New file.
* unicode/gen-combining-chars.py: New file.
* unicode/gen-printable-chars.py: New file.
gcc/ChangeLog:
* Makefile.in (OBJS-libcommon): Add text-art/box-drawing.o,
text-art/canvas.o, text-art/ruler.o, text-art/selftests.o,
text-art/style.o, text-art/styled-string.o, text-art/table.o,
text-art/theme.o, and text-art/widget.o.
* color-macros.h (COLOR_FG_BRIGHT_BLACK): New.
(COLOR_FG_BRIGHT_RED): New.
(COLOR_FG_BRIGHT_GREEN): New.
(COLOR_FG_BRIGHT_YELLOW): New.
(COLOR_FG_BRIGHT_BLUE): New.
(COLOR_FG_BRIGHT_MAGENTA): New.
(COLOR_FG_BRIGHT_CYAN): New.
(COLOR_FG_BRIGHT_WHITE): New.
(COLOR_BG_BRIGHT_BLACK): New.
(COLOR_BG_BRIGHT_RED): New.
(COLOR_BG_BRIGHT_GREEN): New.
(COLOR_BG_BRIGHT_YELLOW): New.
(COLOR_BG_BRIGHT_BLUE): New.
(COLOR_BG_BRIGHT_MAGENTA): New.
(COLOR_BG_BRIGHT_CYAN): New.
(COLOR_BG_BRIGHT_WHITE): New.
* common.opt (fdiagnostics-text-art-charset=): New option.
(diagnostic-text-art.h): New SourceInclude.
(diagnostic_text_art_charset) New Enum and EnumValues.
* configure: Regenerate.
* configure.ac (gccdepdir): Add text-art to loop.
* diagnostic-diagram.h: New file.
* diagnostic-format-json.cc (json_emit_diagram): New.
(diagnostic_output_format_init_json): Wire it up to
context->m_diagrams.m_emission_cb.
* diagnostic-format-sarif.cc: Include "diagnostic-diagram.h" and
"text-art/canvas.h".
(sarif_result::on_nested_diagnostic): Move code to...
(sarif_result::add_related_location): ...this new function.
(sarif_result::on_diagram): New.
(sarif_builder::emit_diagram): New.
(sarif_builder::make_message_object_for_diagram): New.
(sarif_emit_diagram): New.
(diagnostic_output_format_init_sarif): Set
context->m_diagrams.m_emission_cb to sarif_emit_diagram.
* diagnostic-text-art.h: New file.
* diagnostic.cc: Include "diagnostic-text-art.h",
"diagnostic-diagram.h", and "text-art/theme.h".
(diagnostic_initialize): Initialize context->m_diagrams and
call diagnostics_text_art_charset_init.
(diagnostic_finish): Clean up context->m_diagrams.m_theme.
(diagnostic_emit_diagram): New.
(diagnostics_text_art_charset_init): New.
* diagnostic.h (text_art::theme): New forward decl.
(class diagnostic_diagram): Likewise.
(diagnostic_context::m_diagrams): New field.
(diagnostic_emit_diagram): New decl.
* doc/invoke.texi (Diagnostic Message Formatting Options): Add
-fdiagnostics-text-art-charset=.
(-fdiagnostics-plain-output): Add
-fdiagnostics-text-art-charset=none.
* gcc.cc: Include "diagnostic-text-art.h".
(driver_handle_option): Handle OPT_fdiagnostics_text_art_charset_.
* opts-common.cc (decode_cmdline_options_to_array): Add
"-fdiagnostics-text-art-charset=none" to expanded_args for
-fdiagnostics-plain-output.
* opts.cc: Include "diagnostic-text-art.h".
(common_handle_option): Handle OPT_fdiagnostics_text_art_charset_.
* pretty-print.cc (pp_unicode_character): New.
* pretty-print.h (pp_unicode_character): New decl.
* selftest-run-tests.cc: Include "text-art/selftests.h".
(selftest::run_tests): Call text_art_tests.
* text-art/box-drawing-chars.inc: New file, generated by
contrib/unicode/gen-box-drawing-chars.py.
* text-art/box-drawing.cc: New file.
* text-art/box-drawing.h: New file.
* text-art/canvas.cc: New file.
* text-art/canvas.h: New file.
* text-art/ruler.cc: New file.
* text-art/ruler.h: New file.
* text-art/selftests.cc: New file.
* text-art/selftests.h: New file.
* text-art/style.cc: New file.
* text-art/styled-string.cc: New file.
* text-art/table.cc: New file.
* text-art/table.h: New file.
* text-art/theme.cc: New file.
* text-art/theme.h: New file.
* text-art/types.h: New file.
* text-art/widget.cc: New file.
* text-art/widget.h: New file.
gcc/testsuite/ChangeLog:
* gcc.dg/plugin/diagnostic-test-text-art-ascii-bw.c: New test.
* gcc.dg/plugin/diagnostic-test-text-art-ascii-color.c: New test.
* gcc.dg/plugin/diagnostic-test-text-art-none.c: New test.
* gcc.dg/plugin/diagnostic-test-text-art-unicode-bw.c: New test.
* gcc.dg/plugin/diagnostic-test-text-art-unicode-color.c: New test.
* gcc.dg/plugin/diagnostic_plugin_test_text_art.c: New test plugin.
* gcc.dg/plugin/plugin.exp (plugin_test_list): Add them.
libcpp/ChangeLog:
* charset.cc (get_cppchar_property): New function template, based
on...
(cpp_wcwidth): ...this function. Rework to use the above.
Include "combining-chars.inc".
(cpp_is_combining_char): New function
Include "printable-chars.inc".
(cpp_is_printable_char): New function
* combining-chars.inc: New file, generated by
contrib/unicode/gen-combining-chars.py.
* include/cpplib.h (cpp_is_combining_char): New function decl.
(cpp_is_printable_char): New function decl.
* printable-chars.inc: New file, generated by
contrib/unicode/gen-printable-chars.py.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
David Malcolm [Thu, 22 Jun 2023 01:48:59 +0000 (21:48 -0400)]
testsuite: move handle-multiline-outputs to before check for blank lines
I have followup patches that require checking for multiline patterns
that have blank lines within them, so this moves the handling of
multiline patterns before the check for blank lines, allowing for such
multiline patterns.
Doing so uncovers some issues with existing multiline directives, which
the patch fixes.
gcc/testsuite/ChangeLog:
* c-c++-common/Wlogical-not-parentheses-2.c: Split up the
multiline directive.
* gcc.dg/analyzer/malloc-macro-inline-events.c: Remove redundant
dg-regexp directives.
* gcc.dg/missing-header-fixit-5.c: Split up the multiline
directives.
* lib/gcc-dg.exp (gcc-dg-prune): Move call to
handle-multiline-outputs from prune_gcc_output to here.
* lib/multiline.exp (dg-end-multiline-output): Move call to
maybe-handle-nn-line-numbers from prune_gcc_output to here.
* lib/prune.exp (prune_gcc_output): Move calls to
maybe-handle-nn-line-numbers and handle-multiline-outputs from
here to the above.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
Uros Bizjak [Wed, 21 Jun 2023 19:55:30 +0000 (21:55 +0200)]
function: Change return type of predicate function from int to bool
Also change some internal variables to bool and some functions to void.
gcc/ChangeLog:
* function.h (emit_initial_value_sets):
Change return type from int to void.
(aggregate_value_p): Change return type from int to bool.
(prologue_contains): Ditto.
(epilogue_contains): Ditto.
(prologue_epilogue_contains): Ditto.
* function.cc (temp_slot): Make "in_use" variable bool.
(make_slot_available): Update for changed "in_use" variable.
(assign_stack_temp_for_type): Ditto.
(emit_initial_value_sets): Change return type from int to void
and update function body accordingly.
(instantiate_virtual_regs): Ditto.
(rest_of_handle_thread_prologue_and_epilogue): Ditto.
(safe_insn_predicate): Change return type from int to bool.
(aggregate_value_p): Change return type from int to bool
and update function body accordingly.
(prologue_contains): Change return type from int to bool.
(prologue_epilogue_contains): Ditto.
Paul Thomas [Wed, 21 Jun 2023 16:05:58 +0000 (17:05 +0100)]
Fortran: Fix some bugs in associate [PR87477]
2023-06-21 Paul Thomas <pault@gcc.gnu.org>
gcc/fortran
PR fortran/87477
PR fortran/88688
PR fortran/94380
PR fortran/107900
PR fortran/110224
* decl.cc (char_len_param_value): Fix memory leak.
(resolve_block_construct): Remove unnecessary static decls.
* expr.cc (gfc_is_ptr_fcn): New function.
(gfc_check_vardef_context): Use it to permit pointer function
result selectors to be used for associate names in variable
definition context.
* gfortran.h: Prototype for gfc_is_ptr_fcn.
* match.cc (build_associate_name): New function.
(gfc_match_select_type): Use the new function to replace inline
version and to build a new associate name for the case where
the supplied associate name is already used for that purpose.
* resolve.cc (resolve_assoc_var): Call gfc_is_ptr_fcn to allow
associate names with pointer function targets to be used in
variable definition context.
* trans-decl.cc (gfc_get_symbol_decl): Unlimited polymorphic
variables need deferred initialisation of the vptr.
(gfc_trans_deferred_vars): Do the vptr initialisation.
* trans-stmt.cc (trans_associate_var): Ensure that a pointer
associate name points to the target of the selector and not
the selector itself.
gcc/testsuite/
PR fortran/87477
PR fortran/107900
* gfortran.dg/pr107900.f90 : New test
PR fortran/110224
* gfortran.dg/pr110224.f90 : New test
PR fortran/88688
* gfortran.dg/pr88688.f90 : New test
PR fortran/94380
* gfortran.dg/pr94380.f90 : New test
PR fortran/95398
* gfortran.dg/pr95398.f90 : Set -std=f2008, bump the line
numbers in the error tests by two and change the text in two.
Kyrylo Tkachov [Wed, 21 Jun 2023 12:43:26 +0000 (13:43 +0100)]
aarch64: Avoid same input and output Z register for gather loads
The architecture recommends that load-gather instructions avoid using the same
Z register for the load address and the destination, and the Software Optimization
Guides for Arm cores recommend that as well.
This means that for code like:
svuint64_t
food (svbool_t p, uint64_t *in, svint64_t offsets, svuint64_t a)
{
return svadd_u64_x (p, a, svld1_gather_offset(p, in, offsets));
}
we'll want to avoid generating the current:
food:
ld1d z0.d, p0/z, [x0, z0.d] // Z0 reused as input and output.
add z0.d, z1.d, z0.d
ret
However, we still want to avoid generating extra moves where there were
none before, so the tight aarch64-sve-acle.exp tests for load gathers
should still pass as they are.
This patch implements that recommendation for the load gather patterns by:
* duplicating the alternatives
* marking the output operand as early clobber
* Tying the input Z register operand in the original alternatives to 0
* Penalising the original alternatives with '?'
This results in a large-ish patch in terms of diff lines but the new
compact syntax (thanks Tamar) makes it quite a readable an regular change.
The benchmark numbers on a Neoverse V1 on fprate look okay:
diff
503.bwaves_r 0.00%
507.cactuBSSN_r 0.00%
508.namd_r 0.00%
510.parest_r 0.55%
511.povray_r 0.22%
519.lbm_r 0.00%
521.wrf_r 0.00%
526.blender_r 0.00%
527.cam4_r 0.56%
538.imagick_r 0.00%
544.nab_r 0.00%
549.fotonik3d_r 0.00%
554.roms_r 0.00%
fprate 0.10%
Bootstrapped and tested on aarch64-none-linux-gnu.