Richard Biener [Tue, 19 Mar 2024 11:24:08 +0000 (12:24 +0100)]
tree-optimization/114151 - revert PR114074 fix
The following reverts the chrec_fold_multiply fix and only keeps
handling of constant overflow which keeps the original testcase
fixed. A better solution might involve ranger improvements or
tracking of assumptions during SCEV analysis similar to what niter
analysis does.
PR tree-optimization/114151
PR tree-optimization/114269
PR tree-optimization/114322
PR tree-optimization/114074
* tree-chrec.cc (chrec_fold_multiply): Restrict the use of
unsigned arithmetic when actual overflow on constant operands
is observed.
Jakub Jelinek [Tue, 19 Mar 2024 08:49:59 +0000 (09:49 +0100)]
arc: Fix up arc_setup_incoming_varargs [PR114175]
Like for x86-64, alpha or rs6000, arc seems to be affected too.
2024-03-19 Jakub Jelinek <jakub@redhat.com>
PR target/114175
* config/arc/arc.cc (arc_setup_incoming_varargs): Only skip
arc_function_arg_advance for TYPE_NO_NAMED_ARGS_STDARG_P functions
if arg.type is NULL.
Xi Ruoyao [Mon, 18 Mar 2024 09:18:34 +0000 (17:18 +0800)]
LoongArch: Fix C23 (...) functions returning large aggregates [PR114175]
We were assuming TYPE_NO_NAMED_ARGS_STDARG_P don't have any named
arguments and there is nothing to advance, but that is not the case
for (...) functions returning by hidden reference which have one such
artificial argument. This is causing gcc.dg/c23-stdarg-6.c and
gcc.dg/c23-stdarg-8.c to fail.
Fix the issue by checking if arg.type is NULL, as r14-9503 explains.
gcc/ChangeLog:
PR target/114175
* config/loongarch/loongarch.cc
(loongarch_setup_incoming_varargs): Only skip
loongarch_function_arg_advance for TYPE_NO_NAMED_ARGS_STDARG_P
functions if arg.type is NULL.
Christophe Lyon [Fri, 15 Mar 2024 19:55:43 +0000 (19:55 +0000)]
arm: [MVE intrinsics] Fix support for loads [PR target/114323]
The testcase in this PR shows that we would load from an uninitialized
location, because the vld1 instrinsics are reported as "const". This
is because function_instance::reads_global_state_p() does not take
CP_READ_MEMORY into account. Fixing this gives vld1 the "pure"
attribute instead, and solves the problem.
Like in the r14-9503 change on x86-64, I think Alpha also needs to
function_arg_advance after the hidden return pointer argument if
any.
At least, the following patch changes the assembly of s1-s6 functions
on the https://gcc.gnu.org/pipermail/gcc-patches/2024-March/647956.html
c23-stdarg-9.c testcase, and eyeballing the assembly for int f8 (...)
the ... args are passed in 16..21 registers and then on the stack,
while for struct S s8 (...) have hidden return pointer passed in 16
register and ... args in 17..21 registers and then on the stack, and
seems without this patch the incoming varargs setup does the wrong thing
(but I can't test on alpha easily).
Many targets seem to be unaffected, e.g. aarch64, arm, s390*, so I'm not
trying to change all targets together because such a change clearly isn't
needed e.g. for targets which use special register for the hidden return
pointer.
2024-03-19 Jakub Jelinek <jakub@redhat.com>
PR target/114175
* config/alpha/alpha.cc (alpha_setup_incoming_varargs): Only skip
function_arg_advance for TYPE_NO_NAMED_ARGS_STDARG_P functions
if arg.type is NULL.
Jakub Jelinek [Tue, 19 Mar 2024 08:13:32 +0000 (09:13 +0100)]
rs6000: Fix up setup_incoming_varargs [PR114175]
The c23-stdarg-8.c test (as well as the new test below added to cover even
more cases) FAIL on powerpc64le-linux and presumably other powerpc* targets
as well.
Like in the r14-9503-g218d174961 change on x86-64 we need to advance
next_cum after the hidden return pointer argument even in case where
there are no user arguments before ... in C23.
The following patch does that.
There is another TYPE_NO_NAMED_ARGS_STDARG_P use later on:
if (!TYPE_NO_NAMED_ARGS_STDARG_P (TREE_TYPE (current_function_decl))
&& targetm.calls.must_pass_in_stack (arg))
first_reg_offset += rs6000_arg_size (TYPE_MODE (arg.type), arg.type);
but I believe it was added there in r13-3549-g4fe34cdc unnecessarily,
when there is no hidden return pointer argument, arg.type is NULL and
must_pass_in_stack_var_size as well as must_pass_in_stack_var_size_or_pad
return false in that case, and for the TYPE_NO_NAMED_ARGS_STDARG_P
case with hidden return pointer argument that argument should have pointer
type and it is the first argument, so must_pass_in_stack shouldn't be true
for it either.
2024-03-19 Jakub Jelinek <jakub@redhat.com>
PR target/114175
* config/rs6000/rs6000-call.cc (setup_incoming_varargs): Only skip
rs6000_function_arg_advance_1 for TYPE_NO_NAMED_ARGS_STDARG_P functions
if arg.type is NULL.
Jakub Jelinek [Tue, 19 Mar 2024 08:10:26 +0000 (09:10 +0100)]
openmp: Make c_omp_check_loop_binding_exprs diagnostics translatable [PR114364]
c_omp_check_loop_binding_exprs with check_loop_binding_expr was composing
diagnostics from a format string with %s that provided additional words (but not
keywords). That is a big no no for translations, both because the translator
can't choose a different word order and because the %s part wasn't translated
at all (would need to use _("...") to get translated), so this patch rewrites it
such that the whole messages are in the format strings.
2024-03-19 Jakub Jelinek <jakub@redhat.com>
PR c/114364
* c-omp.cc (enum check_loop_binding_expr_ctx): New type.
(check_loop_binding_expr): Remove context argument, add ctx
argument with check_loop_binding_expr_ctx type at the end. Don't
create diagnostic message from multiple pieces.
(c_omp_check_loop_binding_exprs): Adjust callers.
Richard Biener [Mon, 18 Mar 2024 11:39:03 +0000 (12:39 +0100)]
tree-optimization/114375 - disallow SLP discovery of permuted mask loads
We cannot currently handle permutations of mask loads in code generation
or permute optimization. But we simply drop any permutation on the
floor, so the following instead rejects the SLP build rather than
producing wrong-code. I've also made sure to reject them in
vectorizable_load for completeness.
PR tree-optimization/114375
* tree-vect-slp.cc (vect_build_slp_tree_2): Compute the
load permutation for masked loads but reject it when any
such is necessary.
* tree-vect-stmts.cc (vectorizable_load): Reject masked
VMAT_ELEMENTWISE and VMAT_STRIDED_SLP as those are not
supported.
Contributors:
Mary Bennett <mary.bennett@embecosm.com>
Nandni Jamnadas <nandni.jamnadas@embecosm.com>
Pietra Ferreira <pietra.ferreira@embecosm.com>
Charlie Keaney
Jessica Mills
Craig Blackmore <craig.blackmore@embecosm.com>
Simon Cook <simon.cook@embecosm.com>
Jeremy Bennett <jeremy.bennett@embecosm.com>
Helene Chelin <helene.chelin@embecosm.com>
gcc/ChangeLog:
* common/config/riscv/riscv-common.cc: Create XCVbi extension
support.
* config/riscv/riscv.opt: Likewise.
* config/riscv/corev.md: Implement cv_branch<mode> pattern
for cv.beqimm and cv.bneimm.
* config/riscv/riscv.md: Add CORE-V branch immediate to RISC-V
branch instruction pattern.
* config/riscv/constraints.md: Implement constraints
cv_bi_s5 - signed 5-bit immediate.
* config/riscv/predicates.md: Implement predicate
const_int5s_operand - signed 5 bit immediate.
* doc/sourcebuild.texi: Add XCVbi documentation.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/cv-bi-beqimm-compile-1.c: New test.
* gcc.target/riscv/cv-bi-beqimm-compile-2.c: New test.
* gcc.target/riscv/cv-bi-bneimm-compile-1.c: New test.
* gcc.target/riscv/cv-bi-bneimm-compile-2.c: New test.
* lib/target-supports.exp: Add proc for XCVbi.
This patch add XiangShan Nanhu cpu microarchitecture,
Nanhu is a 6-issue, superscalar, out-of-order processor.
More details see: https://xiangshan-doc.readthedocs.io/zh-cn/latest/arch
gcc/ChangeLog:
* config/riscv/riscv-cores.def (RISCV_TUNE): New def.
(RISCV_CORE): Ditto.
* config/riscv/riscv-opts.h (enum riscv_microarchitecture_type): New
option.
* config/riscv/riscv.cc: New def.
* config/riscv/riscv.md: New include.
* config/riscv/xiangshan.md: New file.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/mcpu-xiangshan-nanhu.c: New test.
Nathaniel Shead [Sat, 16 Mar 2024 11:00:29 +0000 (22:00 +1100)]
c++: Fix handling of no-linkage decls for modules
When testing the changes for PR c++/112631 we discovered that currently
we don't emit definitions of block-scope function declarations if
they're not used in the module interface TU, which causes issues if they
are used by importers.
This patch fixes the handling of no-linkage declarations for C++20. In
particular, a type declared in a function with vague linkage or declared
in a module CMI could potentially be accessible outside its defining TU,
and as such we can't assume that function declarations using that type
can never be defined in another TU.
A complication with handling this is that we're only strictly interested
in declarations with a module CMI, but when parsing the global module
fragment we don't yet know whether or not this module will have a CMI
until we reach the "export module" line (or not). Since this case is
IFNDR anyway (by [basic.def.odr] p11) we just tentatively assume while
parsing the GMF that this module will have a CMI; once we see (or don't
see) an 'export module' declaration we can commit to that knowledge for
future declarations.
gcc/cp/ChangeLog:
* cp-tree.h (module_maybe_has_cmi_p): New function.
* decl.cc (grokfndecl): Mark block-scope functions as public if
they could be visible in other TUs.
* decl2.cc (no_linkage_error): Don't error for declarations that
could be defined in other TUs since C++20. Suppress duplicate
errors from 'check_global_declaration'.
* tree.cc (no_linkage_check): In relaxed mode, don't consider
types in a module CMI to have no linkage.
gcc/testsuite/ChangeLog:
* g++.dg/cpp2a/linkage-1.C: New test.
* g++.dg/modules/block-decl-3.h: New test.
* g++.dg/modules/block-decl-3_a.C: New test.
* g++.dg/modules/block-decl-3_b.C: New test.
* g++.dg/modules/block-decl-3_c.C: New test.
* g++.dg/modules/linkage-1_a.C: New test.
* g++.dg/modules/linkage-1_b.C: New test.
* g++.dg/modules/linkage-1_c.C: New test.
* g++.dg/modules/linkage-2.C: New test.
Signed-off-by: Nathaniel Shead <nathanieloshead@gmail.com> Reviewed-by: Jason Merrill <jason@redhat.com>
David Malcolm [Mon, 18 Mar 2024 22:44:34 +0000 (18:44 -0400)]
analyzer: fix ICEs due to sloppy types in bounds-checking [PR110902,PR110928,PR111305,PR111441]
Various analyzer ICEs in our bugzilla relate to sloppy use of types
within bounds-checking.
The bounds-checking code works by comparing symbolic *bit* offsets, and
we don't have a good user-facing type that can represent such an offset
(ptrdiff_type_node is for *byte* offsets).
ana::svalue doesn't enforce valid combinations of types for things like
binary operations. When I added the access diagrams for GCC 14, this
could lead to attempts to generate trees for such svalues, leading to
trees with invalid combinations of types (e.g. PLUS_EXPR or MULT_EXPR of
incompatible types), leading to ICEs inside the tree folding logic.
I tried two approaches to fixing this.
My first approach was to fix the type-handling throughout the
bounds-checking code to use correct types, using size_type_node for
sizes, ptrdiff_type_node for byte offsets, and trying ptrdiff_type_node
for bit offsets. I implemented this, and it fixed the crashes, but
unfortunately it led to:
(a) numerous false negatives from the bounds-checking code, due to it
becoming unable to be sure that the accessed offset was beyond the valid
bounds, due to the expressions involved gaining complicated sets of
nested casts.
(b) ugly access diagrams full of nested casts (for capacities, gap
measurements, etc)
So my second approach, implemented in this patch, is to accept that we
don't have a tree type for representing bit offsets. The patch
represents bit offsets using "typeless" symbolic values i.e. ones for
which get_type () is NULL_TREE, and implements enough support for basic
arithemetic as if these are mathematical integers (albeit ones for which
concrete values within an expression must fit within a signed wide int).
Such values can't be converted to tree, so the patch avoids such
conversions, instead implementing a new svalue::maybe_print_for_user for
printing them to a pretty_printer. The patch uses ptrdiff_type_node for
byte offsets.
Doing so fixes the crashes, whilst appearing to preserve the behavior of
-Wanalyzer-out-of-bounds in my testing.
gcc/analyzer/ChangeLog:
PR analyzer/110902
PR analyzer/110928
PR analyzer/111305
PR analyzer/111441
* access-diagram.cc: Include "analyzer/analyzer-selftests.h".
(get_access_size_str): Reimplement for conversion of
implmementation of bit_size_expr from tree to const svalue &. Use
svalue::maybe_print_for_user rather than tree printing routines.
(remove_ssa_names): Make non-static.
(bit_size_expr::get_formatted_str): Rename to...
(bit_size_expr::maybe_get_formatted_str): ...this, adding "model"
param and converting return type to a unique_ptr. Update for
conversion of implementation of bit_size_expr from tree to
const svalue &. Use svalue::maybe_print_for_user rather than tree
printing routines.
(bit_size_expr::print): Rename to...
(bit_size_expr::maybe_print_for_user): ...this, adding "model"
param and converting return type to bool. Update for
conversion of implementation of bit_size_expr from tree to
const svalue &. Use svalue::maybe_print_for_user rather than tree
printing routines.
(bit_size_expr::maybe_get_as_bytes): Add "mgr" param and convert
return type from tree to const svalue *; reimplement.
(access_range::access_range): Call strip_types when on region_offset
intializations.
(access_range::get_size): Update for conversion of implementation
of bit_size_expr from tree to const svalue &.
(access_operation::get_valid_bits): Pass manager to access_range
ctor.
(access_operation::maybe_get_invalid_before_bits): Likewise.
(access_operation::maybe_get_invalid_after_bits): Likewise.
(boundaries::add): Likewise.
(bit_to_table_map::populate): Add "mgr" param and pass it to
access_range ctor.
(access_diagram_impl::access_diagram_impl): Pass manager to
bit_to_table_map::populate.
(access_diagram_impl::maybe_add_gap): Use svalue rather than tree
for symbolic bit offsets. Port to new bit_size_expr
representation.
(access_diagram_impl::add_valid_vs_invalid_ruler): Port to new
bit_size_expr representation.
(selftest::assert_eq_typeless_integer): New.
(ASSERT_EQ_TYPELESS_INTEGER): New.
(selftest::test_bit_size_expr_to_bytes): New.
(selftest::analyzer_access_diagram_cc_tests): New.
* access-diagram.h (class bit_size_expr): Reimplement, converting
implementation from tree to const svalue &.
(access_range::access_range): Add "mgr" param. Call strip_types
on region_offset initializations.
(access_range::get_size): Update decl for reimplementation.
* analyzer-selftests.cc (selftest::run_analyzer_selftests): Call
selftest::analyzer_access_diagram_cc_tests.
* analyzer-selftests.h
(selftest::analyzer_checker_script_cc_tests): Delete this stray
typo.
(selftest::analyzer_access_diagram_cc_tests): New decl.
* analyzer.h (print_expr_for_user): New decl.
(calc_symbolic_bit_offset): Update decl for reimplementation.
(strip_types): New decls.
(remove_ssa_names): New decl.
* bounds-checking.cc (strip_types): New.
(region_model::check_symbolic_bounds): Use typeless svalues.
* region-model-manager.cc
(region_model_manager::get_or_create_constant_svalue): Add "type"
param. Add overload with old signature.
(region_model_manager::get_or_create_int_cst): Support type being
NULL_TREE.
(region_model_manager::maybe_fold_unaryop): Gracefully reject folding
of casts to NULL_TREE type.
(get_code_for_cast): Use NOP_EXPR for "casting" svalues to
NULL_TREE type.
(region_model_manager::get_or_create_cast): Support "casting"
svalues to NULL_TREE type.
(region_model_manager::maybe_fold_binop): Don't crash on inputs
with NULL_TREE type. Handle folding of binops on constants with
NULL_TREE type. Add missing cast from PR analyzer/110902.
Support enough folding of other ops on NULL_TREE type to support
bounds checking.
(region_model_manager::get_or_create_const_fn_result_svalue):
Remove assertion that type is nonnull.
* region-model-manager.h
(region_model_manager::get_or_create_constant_svalue): Add
overloaded decl taking a type.
(region_model_manager::maybe_fold_binop): Make public.
(region_model_manager::constants_map_t): Use
constant_svalue::key_t for the key, rather than just tree.
* region-model.cc (print_expr_for_user): New.
(selftest::test_array_2): Handle casts.
* region.cc (region_offset::calc_symbolic_bit_offset): Return
const svalue & rather than tree, and reimplement accordingly.
(region::calc_offset): Use ptrdiff_type_node for types of byte
offsets.
(region::maybe_print_for_user): New.
(element_region::get_relative_symbolic_offset): Use NULL_TREE for
types of bit offsets.
(offset_region::get_bit_offset): Likewise.
(sized_region::get_bit_size_sval): Likewise for bit sizes.
* region.h (region::maybe_print_for_user): New decl.
* svalue.cc (class auto_add_parens): New.
(svalue::maybe_print_for_user): New.
(svalue::cmp_ptr): Support typeless constant svalues.
(tristate_from_boolean_tree_node): New, taken from...
(constant_svalue::eval_condition): ...here. Handle comparison of
typeless integer svalue constants.
* svalue.h (svalue::maybe_print_for_user): New decl.
(class constant_svalue): Support the type of the svalue being
NULL_TREE.
(struct default_hash_traits<constant_svalue::key_t>): New.
François Dumont [Sun, 17 Mar 2024 18:06:55 +0000 (19:06 +0100)]
libstdc++: Fix N3344 behavior on _Safe_iterator::_M_can_advance
We shall be able to advance from a 0 offset a value-initialized iterator.
libstdc++-v3/ChangeLog:
* include/debug/safe_iterator.tcc (_Safe_iterator<>::_M_can_advance):
Accept 0 offset advance on value-initialized iterator.
* testsuite/23_containers/vector/debug/n3644.cc: New test case.
Unordered container local_iterator range shall not contain any singular
iterator unless both iterators are both value-initialized.
libstdc++-v3/ChangeLog:
* include/debug/safe_local_iterator.tcc
(_Safe_local_iterator::_M_valid_range): Add _M_value_initialized and
_M_singular checks.
* testsuite/23_containers/unordered_set/debug/114316.cc: New test case.
Recent PR111822 fix implemented REG_EH_REGION note copying to a STV converted
preload instruction in general_scalar_chain::convert_op. However, the same
issue remains in timode_scalar_chain::convert_op. Instead of copying the
newly introduced code to timode_scalar_chain::convert_op, the patch unifies
both functions to a common function.
PR target/111822
gcc/ChangeLog:
* config/i386/i386-features.cc (smode_convert_cst): New function
to handle SImode, DImode and TImode immediates, generalized from
timode_convert_cst.
(timode_convert_cst): Remove.
(scalar_chain::convert_op): Unify from
general_scalar_chain::convert_op and timode_scalar_chain::convert_op.
(general_scalar_chain::convert_op): Remove.
(timode_scalar_chain::convert_op): Remove.
(timode_scalar_chain::convert_insn): Update the call to
renamed timode_convert_cst.
* config/i386/i386-features.h (class scalar_chain):
Redeclare convert_op as protected class member.
(class general_calar_chain): Remove convert_op.
(class timode_scalar_chain): Ditto.
gcc/testsuite/ChangeLog:
* g++.target/i386/pr111822.C (dg-do): Compile only for ia32 targets.
(dg-options): Add -march=x86-64.
testsuite: Turn errors back into warnings in arm/acle/cde-mve-error-2.c
Since commit 2c3db94d9fd ("c: Turn int-conversion warnings into
permerrors") the test fails with errors such as:
FAIL: gcc.target/arm/acle/cde-mve-error-2.c -O0 (test for errors, line 32)
FAIL: gcc.target/arm/acle/cde-mve-error-2.c -O0 (test for errors, line 33)
FAIL: gcc.target/arm/acle/cde-mve-error-2.c -O0 (test for errors, line 34)
FAIL: gcc.target/arm/acle/cde-mve-error-2.c -O0 (test for errors, line 35)
⋮
FAIL: gcc.target/arm/acle/cde-mve-error-2.c -O0 (test for excess errors)
There's a total of 1016 errors. Here's a sample of the excess errors:
Excess errors:
/path/gcc.git/gcc/testsuite/gcc.target/arm/acle/cde-mve-error-2.c:117:31: error: passing argument 2 of '__builtin_arm_vcx1qv16qi' makes integer from pointer without a cast [-Wint-conversion]
/path/gcc.git/gcc/testsuite/gcc.target/arm/acle/cde-mve-error-2.c:119:3: error: passing argument 3 of '__builtin_arm_vcx1qav16qi' makes integer from pointer without a cast [-Wint-conversion]
/path/gcc.git/gcc/testsuite/gcc.target/arm/acle/cde-mve-error-2.c:121:3: error: passing argument 3 of '__builtin_arm_vcx2qv16qi' makes integer from pointer without a cast [-Wint-conversion]
/path/gcc.git/gcc/testsuite/gcc.target/arm/acle/cde-mve-error-2.c:123:3: error: passing argument 3 of '__builtin_arm_vcx2qv16qi' makes integer from pointer without a cast [-Wint-conversion]
The test expects these messages to be warnings, not errors. My first
try was to change it to expect them as errors instead. This didn't
work, IIUC because the error prevents the compiler from continuing
processing the file and thus other errors which are expected by the
test don't get emitted.
Therefore, add -fpermissive so that the test behaves as it did
previously. Because of the additional line in the header, the line
numbers of the expected warnings don't match anymore so replace them
with ".-1" as suggested by Richard Earnshaw.
Tested on armv8l-linux-gnueabihf.
gcc/testsuite/ChangeLog:
* gcc.target/arm/acle/cde-mve-error-2.c: Add -fpermissive. Use
relative offsets for line numbers.
Jonathan Wakely [Fri, 1 Mar 2024 16:46:29 +0000 (16:46 +0000)]
gcc_update: Add missing generated files
I'm seeing errors for --enable-maintainer-mode builds due to incorrectly
regenerating these files. They should be touched by gcc_update so they
aren't regenerated incorrectly.
contrib/ChangeLog:
* gcc_update: Add more generated files in libcc1, lto-plugin,
fixincludes, and libstdc++-v3.
Nathaniel Shead [Fri, 15 Mar 2024 13:11:25 +0000 (00:11 +1100)]
testsuite: Fix excess errors for new modules testcases on powerpc [PR114320]
On some configurations, PowerPC emits -Wpsabi warnings when using IEEE
long doubles on a machine configured with IBM long double by default.
This patch suppresses these warnings for this testcase.
Georg-Johann Lay [Mon, 18 Mar 2024 07:50:02 +0000 (08:50 +0100)]
avr.md - Tweak xor insn constraints.
xor insn can handle some more values without the requirement of a
scratch register. This patch adds a new constraint alternative for
such values. The output function avr_out_bitop already handles
these cases, so no change is needed there.
As the tests assume that strndup() is visible (only part of
POSIX.1-2008) define the guard to ensure that it's visible. Currently,
glibc appears to always have this defined in C++, newlib does not.
Without this patch, fails like this can be seen:
Testing analyzer/strndup-1.c, -std=c++98
.../strndup-1.c: In function 'void test_1(const char*)':
.../strndup-1.c:11:13: error: 'strndup' was not declared in this scope; did you mean 'strncmp'?
.../strndup-1.c: In function 'void test_2(const char*)':
.../strndup-1.c:16:13: error: 'strndup' was not declared in this scope; did you mean 'strncmp'?
.../strndup-1.c: In function 'void test_3(const char*)':
.../strndup-1.c:21:13: error: 'strndup' was not declared in this scope; did you mean 'strncmp'?
hppa: Improve handling of REG+D addresses when generating PA 2.0 code
In looking at PR 112415, it became clear that improvements could be
made in the handling of loads and stores using REG+D addresses. A
change in 2002 conflated two issues:
1) We can't generate insns with 14-bit displacements before reload
completes when generating PA 1.x code since floating-point loads and
stores only support 5-bit offsets in PA 1.x.
2) The GNU ELF 32-bit linker lacks relocation support for PA 2.0
floating point instructions with 14-bit displacements. These
relocations affect instructions with symbolic references.
The result of the change was to block creation of PA 2.0 instructions
with 14-bit REG_D displacements for SImode, DImode, SFmode and DFmode
on the GNU linux target before reload. This was unnecessary as these
instructions don't need relocation.
This change revises the INT14_OK_STRICT define to allow creation
of instructions with 14-bit REG+D addresses before reload when
generating PA 2.0 code.
2024-03-17 John David Anglin <danglin@gcc.gnu.org>
gcc/ChangeLog:
PR rtl-optimization/112415
* config/pa/pa.cc (pa_emit_move_sequence): Revise condition
for symbolic memory operands.
(pa_legitimate_address_p): Revise LO_SUM condition.
* config/pa/pa.h (INT14_OK_STRICT): Revise define. Move
comment about GNU linker to predicates.md.
* config/pa/predicates.md (floating_point_store_memory_operand):
Revise condition for symbolic memory operands. Update
comment.
François Dumont [Thu, 14 Mar 2024 21:13:57 +0000 (22:13 +0100)]
libstdc++: Implement N3644 on _Safe_iterator<> [PR114316]
Consider range of value-initialized iterators as valid and empty.
libstdc++-v3/ChangeLog:
PR libstdc++/114316
* include/debug/safe_iterator.tcc (_Safe_iterator<>::_M_valid_range):
First check if both iterators are value-initialized before checking if
singular.
* testsuite/23_containers/set/debug/114316.cc: New test case.
* testsuite/23_containers/vector/debug/114316.cc: New test case.
Gaius Mulley [Sun, 17 Mar 2024 14:49:23 +0000 (14:49 +0000)]
PR modula2/114296 ICE when attempting to create a constant set with a variable element
This patch corrects the virtual token creation for the aggregate constant
and also corrects tokens for constructor components.
gcc/m2/ChangeLog:
PR modula2/114296
* gm2-compiler/M2ALU.mod (ElementsSolved): Add tokenno parameter.
Add constant checks and generate error messages.
(EvalSetValues): Pass tokenno parameter to ElementsSolved.
* gm2-compiler/M2LexBuf.mod (stop): New procedure.
(MakeVirtualTok): Call stop if caret = BadTokenNo.
* gm2-compiler/M2Quads.def (BuildNulExpression): Add tokpos
parameter.
(BuildSetStart): Ditto.
(BuildEmptySet): Ditto.
(BuildConstructorEnd): Add startpos parameter.
(BuildTypeForConstructor): Add tokpos parameter.
* gm2-compiler/M2Quads.mod (BuildNulExpression): Add tokpos
parameter and push tokpos to the quad stack.
(BuildSetStart): Add tokpos parameter and push tokpos.
(BuildSetEnd): Rewrite.
(BuildEmptySet): Add tokpos parameter and push tokpos with
the set type.
(BuildConstructorStart): Pop typepos.
(BuildConstructorEnd): Add startpos parameter.
Create valtok from startpos and cbratokpos.
(BuildTypeForConstructor): Add tokpos parameter.
* gm2-compiler/M2Range.def (InitAssignmentRangeCheck): Rename
d to des and e to expr.
Add destok and exprtok parameters.
* gm2-compiler/M2Range.mod (InitAssignmentRangeCheck): Rename
d to des and e to expr.
Add destok and exprtok parameters.
Save destok and exprtok into range record.
(FoldAssignment): Pass exprtok to TryDeclareConstant.
* gm2-compiler/P3Build.bnf (ComponentValue): Rewrite.
(Constructor): Rewrite.
(ConstSetOrQualidentOrFunction): Rewrite.
(SetOrQualidentOrFunction): Rewrite.
* gm2-compiler/PCBuild.bnf (ConstSetOrQualidentOrFunction): Rewrite.
(SetOrQualidentOrFunction): Rewrite.
* gm2-compiler/PHBuild.bnf (Constructor): Rewrite.
(ConstSetOrQualidentOrFunction): Rewrite.
gcc/testsuite/ChangeLog:
PR modula2/114296
* gm2/pim/fail/badtype2.mod: New test.
Jakub Jelinek [Sat, 16 Mar 2024 14:16:33 +0000 (15:16 +0100)]
i386: Fix setup of incoming varargs for (...) functions which return large aggregates [PR114175]
The c23-stdarg-6.c testcase I've added recently apparently works fine with
-O0 but aborts with -O1 and higher on x86_64-linux.
The problem is in setup of incoming varargs.
Like function.cc before r14-9249 even ix86_setup_incoming_varargs assumes
that TYPE_NO_NAMED_ARGS_STDARG_P don't have any named arguments and there
is nothing to advance, but that is not the case for (...) functions
returning by hidden reference which have one such artificial argument.
If the setup_incoming_varargs hook is called from the
if (TYPE_NO_NAMED_ARGS_STDARG_P (TREE_TYPE (fndecl))
&& fnargs.is_empty ())
{
struct assign_parm_data_one data = {};
assign_parms_setup_varargs (&all, &data, false);
}
spot, i.e. where there is no hidden return argument passed, arg.type
is always NULL, while when it is called in the
if (cfun->stdarg && !DECL_CHAIN (parm))
assign_parms_setup_varargs (&all, &data, false);
spot, even when it is TYPE_NO_NAMED_ARGS_STDARG_P arg.type will be non-NULL.
The tree-stdarg.cc pass in f in c23-stdarg-6.cc at -O1 or higher determines
that va_arg is used on integral types at most twice (loads 2 words),
and because ix86_setup_incoming_varargs doesn't advance, the code saves
just the %rdi and %rsi registers to the save area. But that isn't correct,
it should save %rsi and %rdx because %rdi is the hidden return argument.
With -O0 tree-stdarg.cc doesn't attempt to optimize and we save all the
registers, so it works fine in that case.
Now, I think we'll need the same fix also on
aarch64, alpha, arc, csky, ia64, loongarch, mips, mmix, nios2, riscv, visium
which have pretty much the similarly looking snippet in their hooks
changed by the r13-3549 commit.
Then arm, epiphany, fr30, frv, ft32, m32r, mcore, nds32, rs6000, sh
have different changes but most likely need something similar too.
I don't have access to most of those, could test aarch64 and rs6000 I guess.
2024-03-16 Jakub Jelinek <jakub@redhat.com>
PR target/114175
* config/i386/i386.cc (ix86_setup_incoming_varargs): Only skip
ix86_function_arg_advance for TYPE_NO_NAMED_ARGS_STDARG_P functions
if arg.type is NULL.
* gcc.dg/c23-stdarg-7.c: New test.
* gcc.dg/c23-stdarg-8.c: New test.
Jakub Jelinek [Sat, 16 Mar 2024 14:15:29 +0000 (15:15 +0100)]
bitint: Fix up stores to large/huge _BitInt bitfields [PR114329]
The verifier requires BIT_FIELD_REFs with INTEGRAL_TYPE_P first operand
to have mode precision. In most cases for the large/huge _BitInt bitfield
stores the code uses bitfield representatives, which are typically arrays
of chars, but if the bitfield starts at byte boundary on big endian,
the code uses as nlhs in lower_mergeable_store COMPONENT_REF of the
bitfield FIELD_DECL instead, which is fine for the limb accesses,
but when used for the most significant limb can result in invalid
BIT_FIELD_REF because the first operand then has BITINT_TYPE and
usually VOIDmode.
The following patch adds a helper method for the 4 creatikons of
BIT_FIELD_REF which when needed adds a VIEW_CONVERT_EXPR.
2024-03-16 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/114329
* gimple-lower-bitint.cc (struct bitint_large_huge): Declare
build_bit_field_ref method.
(bitint_large_huge::build_bit_field_ref): New method.
(bitint_large_huge::lower_mergeable_stmt): Use it.
Nathaniel Shead [Tue, 12 Mar 2024 12:24:27 +0000 (23:24 +1100)]
c++: Check module attachment instead of just purview when necessary [PR112631]
Block-scope declarations of functions or extern values are not allowed
when attached to a named module. Similarly, class member functions are
not inline if attached to a named module. However, in both these cases
we currently only check if the declaration is within the module purview;
it is possible for such a declaration to occur within the module purview
but not be attached to a named module (e.g. in an 'extern "C++"' block).
This patch makes the required adjustments.
PR c++/112631
gcc/cp/ChangeLog:
* cp-tree.h (named_module_attach_p): New function.
* decl.cc (start_decl): Check for attachment not purview.
(grokmethod): Likewise.
gcc/testsuite/ChangeLog:
* g++.dg/modules/block-decl-1_a.C: New test.
* g++.dg/modules/block-decl-1_b.C: New test.
* g++.dg/modules/block-decl-2.C: New test.
Jakub Jelinek [Fri, 15 Mar 2024 18:04:33 +0000 (19:04 +0100)]
libgcc: Fix quotient and/or remainder negation in __divmodbitint4 [PR114327]
While for __mulbitint3 we actually don't negate anything and perform the
multiplication in unsigned style always, for __divmodbitint4 if the operands
aren't unsigned and are negative, we negate them first and then try to
negate them as needed at the end.
quotient is negated if just one of the operands was negated and the other
wasn't or vice versa, and remainder is negated if the first operand was
negated.
The case which doesn't work correctly is if due to limited range of the
operands we perform the division/modulo in some smaller number of limbs
and then extend it to the desired precision of the quotient and/or
remainder results. If they aren't negated, the extension is done with
memset to 0, if they are negated, the extension was done with memset
to -1. The problem is that if the quotient or remainder is zero,
then bitint_negate negates it again to zero (that is ok), but we should
then extend with memset to 0, not memset to -1.
The following patch achieves that by letting bitint_negate also check if
the negated operand is zero and changes the memset argument based on that.
2024-03-15 Jakub Jelinek <jakub@redhat.com>
PR libgcc/114327
* libgcc2.c (bitint_negate): Return UWtype bitwise or of all the limbs
before negation rather than void.
(__divmodbitint4): Determine whether to fill in the upper limbs after
negation based on whether bitint_negate returned 0 or non-zero, rather
then always filling with -1.
Jakub Jelinek [Fri, 15 Mar 2024 11:20:04 +0000 (12:20 +0100)]
lower-subreg, edit-context: Fix comment typos
When backporting r14-9315 to 13 branch, I've noticed I've missed
one letter in a comment. And grepping for similar issues I found
one word with too many.
Jakub Jelinek [Fri, 15 Mar 2024 09:46:47 +0000 (10:46 +0100)]
i386: Fix a pasto in ix86_expand_int_sse_cmp [PR114339]
In r13-3803-gfa271afb58 I've added an optimization for LE/LEU/GE/GEU
comparison against CONST_VECTOR. As the comments say:
/* x <= cst can be handled as x < cst + 1 unless there is
wrap around in cst + 1. */
...
/* For LE punt if some element is signed maximum. */
...
/* For LEU punt if some element is unsigned maximum. */
and
/* x >= cst can be handled as x > cst - 1 unless there is
wrap around in cst - 1. */
...
/* For GE punt if some element is signed minimum. */
...
/* For GEU punt if some element is zero. */
Apparently I wrote the GE/GEU (second case) first and then
copied/adjusted it for LE/LEU, most of the adjustments look correct, but
I've left if (code == GE) comparison when testing if it should punt for
signed maximum. That condition is never true, because this is in
switch (code) { ... case LE: case LEU: block and we really meant to
be what the comment says, for LE punt if some element is signed maximum,
as then cst + 1 wraps around.
The following patch fixes the pasto.
2024-03-15 Jakub Jelinek <jakub@redhat.com>
PR target/114339
* config/i386/i386-expand.cc (ix86_expand_int_sse_cmp) <case LE>: Fix
a pasto, compare code against LE rather than GE.
The x86-64 and aarch64 psABIs (and the unwritten ia64 psABI part) say that
the padding bits of _BitInt are undefined, while the expansion internally
typically assumes that non-mode precision integers are sign/zero extended
and extends after operations. We handle that mismatch with EXTEND_BITINT
done when reading from untrusted sources like function arguments, reading
_BitInt from memory etc. but otherwise keep relying on stuff being extended
internally (say in pseudos).
The return value of a function is an ABI boundary though too and we need
to extend that too.
2024-03-15 Jakub Jelinek <jakub@redhat.com>
PR middle-end/114332
* expr.cc (expand_expr_real_1): EXTEND_BITINT also CALL_EXPR results.
Jakub Jelinek [Fri, 15 Mar 2024 09:01:41 +0000 (10:01 +0100)]
testsuite: Fix up pr104601.C for recent libstdc++ changes
r14-9478 added [[nodiscard]] to various <algorithm> APIs including find_if
the pr104601.C testcase uses. As it is an optimization bug fix testcase,
haven't tried to adjust the testcase to use the find_if result, but instead
have added -Wno-unused-result flag to quiet the warning.
2024-03-15 Jakub Jelinek <jakub@redhat.com>
* g++.dg/torture/pr104601.C: Add -Wno-unused-result to dg-options.
Jakub Jelinek [Fri, 15 Mar 2024 08:16:43 +0000 (09:16 +0100)]
bitint: Fix up adjustment of large/huge _BitInt arguments of returns_twice calls [PR113466]
This patch (on top of the just posted gsi_safe_insert* fixes patch)
fixes the instrumentation of large/huge _BitInt SSA_NAME arguments of
returns_twice calls.
In this case it isn't just a matter of using gsi_safe_insert_before instead
of gsi_insert_before, we need to do more.
One thing is that unlike the asan/ubsan instrumentation which does just some
checking, here we want the statement before the call to load into a SSA_NAME
which is passed to the call. With another edge we need to add a PHI,
with one PHI argument the loaded SSA_NAME, another argument an uninitialized
warning free SSA_NAME and a result and arrange for all 3 SSA_NAMEs to be
preserved (i.e. stay as is, be no longer lowered afterwards).
Unfortunately, edge_before_returns_twice_call can create new SSA_NAMEs using
copy_ssa_name and while we can have a reasonable partition for them (same
partition as PHI result correspoding to the PHI argument newly added), adding
SSA_NAMEs into a partition after the partitions are finalized is too ugly.
So, this patch takes a different approach suggested by Richi, just emit
the argument loads before the returns_twice call normally (i.e. temporarily
create invalid IL) and just remember that we did that, and when the bitint
lowering is otherwise done fix this up, gsi_remove those statements,
gsi_safe_insert_before and and create the needed new PHIs.
2024-03-15 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/113466
* gimple-lower-bitint.cc (bitint_large_huge): Add m_returns_twice_calls
member.
(bitint_large_huge::bitint_large_huge): Initialize it.
(bitint_large_huge::~bitint_large_huge): Release it.
(bitint_large_huge::lower_call): Remember ECF_RETURNS_TWICE call stmts
before which at least one statement has been inserted.
(gimple_lower_bitint): Move argument loads before ECF_RETURNS_TWICE
calls to a different block and add corresponding PHIs.
Paul Thomas [Fri, 15 Mar 2024 06:52:59 +0000 (06:52 +0000)]
Fortran: Fix class/derived/complex function associate selectors [PR87477]
2024-03-15 Paul Thomas <pault@gcc.gnu.org>
gcc/fortran
PR fortran/87477
PR fortran/89645
PR fortran/99065
PR fortran/114141
PR fortran/114280
* class.cc (gfc_change_class): New function needed for
associate names, when rank changes or a derived type is
produced by resolution
* dump-parse-tree.cc (show_code_node): Make output for SELECT
TYPE more comprehensible.
* expr.cc (find_inquiry_ref): Do not simplify expressions of
an inferred type.
* gfortran.h : Add 'gfc_association_list' to structure
'gfc_association_list'. Add prototypes for
'gfc_find_derived_types', 'gfc_fixup_inferred_type_refs' and
'gfc_change_class'. Add macro IS_INFERRED_TYPE.
* match.cc (copy_ts_from_selector_to_associate): Add bolean arg
'select_type' with default false. If this is a select type name
and the selector is a inferred type, build the class type and
apply it to the associate name.
(build_associate_name): Pass true to 'select_type' in call to
previous.
* parse.cc (parse_associate): If the selector is inferred type
the associate name is too. Make sure that function selector
class and rank, if known, are passed to the associate name. If
a function result exists, pass its typespec to the associate
name.
* primary.cc (resolvable_fcns): New function to check that all
the function references are resolvable.
(gfc_match_varspec): If a scalar derived type select type
temporary has an array reference, match the array reference,
treating this in the same way as an equivalence member. Do not
set 'inquiry' if applied to an unknown type the inquiry name
is ambiguous with the component of an accessible derived type.
Check that resolution of the target expression is OK by testing
if the symbol is declared or is an operator expression, then
using 'resolvable_fcns' recursively. If all is well, resolve
the expression. If this is an inferred type with a component
reference, call 'gfc_find_derived_types' to find a suitable
derived type. If there is an inquiry ref and the symbol either
is of unknown type or is inferred to be a derived type, set the
primary and symbol TKR appropriately.
* resolve.cc (resolve_variable): Call new function below.
(gfc_fixup_inferred_type_refs): New function to ensure that the
expression references for a inferred type are consistent with
the now fixed up selector.
(resolve_assoc_var): Ensure that derived type or class function
selectors transmit the correct arrayspec to the associate name.
(resolve_select_type): If the selector is an associate name of
inferred type and has no component references, the associate
name should have its typespec. Simplify the conversion of a
class array to class scalar by calling 'gfc_change_class'.
Make sure that a class, inferred type selector with an array
ref transfers the typespec from the symbol to the expression.
* symbol.cc (gfc_set_default_type): If an associate name with
unknown type has a selector expression, try resolving the expr.
(find_derived_types, gfc_find_derived_types): New functions
that search for a derived type with a given name.
* trans-expr.cc (gfc_conv_variable): Some inferred type exprs
escape resolution so call 'gfc_fixup_inferred_type_refs'.
* trans-stmt.cc (trans_associate_var): Tidy up expression for
'class_target'. Finalize and free class function results.
Correctly handle selectors that are class functions and class
array references, passed as derived types.
gcc/testsuite/
PR fortran/87477
PR fortran/89645
PR fortran/99065
* gfortran.dg/associate_64.f90 : New test
* gfortran.dg/associate_66.f90 : New test
* gfortran.dg/associate_67.f90 : New test
PR fortran/114141
* gfortran.dg/associate_65.f90 : New test
PR fortran/114280
* gfortran.dg/associate_68.f90 : New test
YunQiang Su [Fri, 15 Mar 2024 06:33:58 +0000 (14:33 +0800)]
MIPS: Add -m(no-)strict-align option
We support options -m(no-)unaligned-access 2 years ago, while
currently most of other ports prefer -m(no-)strict-align.
Let's support -m(no-)strict-align, and keep -m(no-)unaligned-access
as alias.
gcc
* config/mips/mips.opt: Support -mstrict-align, and use
TARGET_STRICT_ALIGN as the flag; keep -m(no-)unaligned-access
as alias.
* config/mips/mips.h: Use TARGET_STRICT_ALIGN.
* config/mips/mips.opt.urls: Regenerate.
* doc/invoke.texi: Document -m(no-)strict-algin for MIPSr6.
Tejas Belagod [Wed, 6 Mar 2024 10:00:26 +0000 (15:30 +0530)]
vect: Call vect_convert_output with the right vecitype [PR114108]
This patch fixes a bug where vect_recog_abd_pattern called vect_convert_output
with the incorrect vecitype for the corresponding pattern_stmt.
vect_convert_output expects vecitype to be the vector form of the scalar type
of the LHS of pattern_stmt, but we were passing in the vector form of the LHS
of the new impending conversion statement. This caused a skew in ABD's
pattern_stmt having the vectype of the following gimple pattern_stmt.
2024-03-06 Tejas Belagod <tejas.belagod@arm.com>
gcc/ChangeLog:
PR middle-end/114108
* tree-vect-patterns.cc (vect_recog_abd_pattern): Call
vect_convert_output with the correct vecitype.
gcc/testsuite/ChangeLog:
* gcc.dg/vect/pr114108.c: New test.
Chenghui Pan [Thu, 14 Mar 2024 01:26:54 +0000 (09:26 +0800)]
LoongArch: Remove masking process for operand 3 of xvpermi.q.
The behavior of non-zero unused bits in xvpermi.q instruction's
third operand is undefined on LoongArch, according to our
discussion (https://github.com/llvm/llvm-project/pull/83540),
we think that keeping original insn operand as unmodified
state is better solution.
Jason Merrill [Thu, 22 Feb 2024 10:06:27 +0000 (10:06 +0000)]
tree-core: clarify clobber comments
It came up on the mailing list that OBJECT_BEGIN/END are described as
marking object lifetime, but mark the beginning of the constructor and end
of the destructor, whereas the C++ notion of lifetime is between the end of
the constructor and beginning of the destructor. So let's fix the comments.
Gaius Mulley [Thu, 14 Mar 2024 19:09:34 +0000 (19:09 +0000)]
PR modula2/114294 expression causes ICE
This patch fixes an ICE when encountering an expression:
1 + HIGH (a[0]). The fix was to assign a type to the constant
created by BuildConstHighFromSym in M2Quads.mod.
gcc/m2/ChangeLog:
PR modula2/114294
* gm2-compiler/M2Quads.mod (BuildConstHighFromSym):
Call PutConst to assign the type Cardinal in the result
constant.
gcc/testsuite/ChangeLog:
PR modula2/114294
* gm2/pim/pass/log: Removed.
* gm2/pim/pass/highexp.mod: New test.
When generating PA 1.x code or code for GNU ld, floating-point
accesses only support 5-bit displacements but integer accesses
support 14-bit displacements. I mistakenly assumed reload
could fix an invalid 14-bit displacement in a floating-point
access but this is not the case.
2024-03-14 John David Anglin <danglin@gcc.gnu.org>
gcc/ChangeLog:
PR target/114288
* config/pa/pa.cc (pa_legitimate_address_p): Don't allow
14-bit displacements before reload for modes that may use
a floating-point load or store.
David Faust [Thu, 14 Mar 2024 16:05:38 +0000 (09:05 -0700)]
bpf: define INT8_TYPE as signed char
Change the BPF backend to define INT8_TYPE with an explicit sign, rather
than a plain char. This is in line with other targets and removes the
risk of int8_t being affected by the signedness of the plain char type
of the host system.
The motivation for this change is that even if `char' is defined to be
signed in BPF targets, some BPF programs use the (mal)practice of
including internal libc headers, either directly or indirectly via
kernel headers, which in turn may trigger compilation errors regarding
redefinitions of types.
gcc/
* config/bpf/bpf.h (INT8_TYPE): Change to signed char.
Max Filippov [Thu, 14 Mar 2024 11:20:36 +0000 (04:20 -0700)]
gcc: xtensa: reorder movsi_internal patterns for better code generation during LRA
After switching to LRA xtensa backend generates the following code for
saving/loading registers:
movi a9, 0x190
add a9, a9, sp
s32i.n a3, a9, 0
instead of the shorter and more efficient
s32i a3, a9, 0x190
E.g. the following code can be used to reproduce it:
int f1(int a, int b, int c, int d, int e, int f, int *p);
int f2(int a, int b, int c, int d, int e, int f, int *p);
int f3(int a, int b, int c, int d, int e, int f, int *p);
int foo(int a, int b, int c, int d, int e, int f)
{
int g[100];
return
f1(a, b, c, d, e, f, g) +
f2(a, b, c, d, e, f, g) +
f3(a, b, c, d, e, f, g);
}
This happens in the LRA pass because s32i.n and l32i.n are listed before
the s32i and l32i in the movsi_internal pattern and alternative
consideration loop stops early.
gcc/
* config/xtensa/xtensa.md (movsi_internal): Move l32i and s32i
patterns ahead of the l32i.n and s32i.n.
Jonathan Wakely [Mon, 26 Feb 2024 13:17:13 +0000 (13:17 +0000)]
libstdc++: Add nodiscard in <algorithm>
Add the [[nodiscard]] attribute to several functions in <algorithm>.
These all have no side effects and are only called for their return
value (e.g. std::count) or produce a result that must not be discarded
for correctness (e.g. std::remove).
I was intending to add the attribute to a number of other functions like
std::copy_if, std::unique_copy, std::set_union, and std::set_difference.
I stopped when I noticed that MSVC doesn't use it on those functions,
which I suspect is because they're often used with an insert iterator
(e.g. std::back_insert_iterator). In that case it doesn't matter if
you discard the result, because you have the container to tell you how
many elements were copied to the output range.
Jakub Jelinek [Thu, 14 Mar 2024 16:48:30 +0000 (17:48 +0100)]
icf: Reset SSA_NAME_{PTR,RANGE}_INFO in successfully merged functions [PR113907]
AFAIK we have no code in LTO streaming to stream out or in
SSA_NAME_{RANGE,PTR}_INFO, so LTO effectively throws it all away
and let vrp1 and alias analysis after IPA recompute that. There is
just one spot, for IPA VRP and IPA bit CCP we save/restore ranges
and set SSA_NAME_{PTR,RANGE}_INFO e.g. on parameters depending on what
we saved and propagated, but that is after streaming in bodies for the
post IPA optimizations.
Now, without LTO SSA_NAME_{RANGE,PTR}_INFO is already computed from
earlier in many cases (er.g. evrp and early alias analysis but other spots
too), but IPA ICF is ignoring the ranges and points-to details when
comparing the bodies. I think ignoring that is just fine, that is
effectively what we do for LTO where we throw that information away
before the analysis, and not ignoring it could lead to fewer ICF merging
possibilities.
So, the following patch instead verifies that for LTO SSA_NAME_{PTR,RANGE}_INFO
just isn't there on SSA_NAMEs in functions into which other functions have
been ICFed, and for non-LTO throws that information away (which matches the
LTO behavior).
Another possibility would be to remember the SSA_NAME <-> SSA_NAME mapping
vector (just one of the 2) on successful sem_function::equals on the
sem_function which is not the chosen leader (e.g. how SSA_NAMEs in the
leader map to SSA_NAMEs in the other function) and use that vector
to union the ranges in sem_function::merge. I can implement that for
comparison, but wanted to post this first if there is an agreement on
doing that or if Honza thinks we should take SSA_NAME_{RANGE,PTR}_INFO
into account. I think we can compare SSA_NAME_RANGE_INFO, but have
no idea how to try to compare points to info. And I think it will result
in less effective ICF for non-LTO vs. LTO unnecessarily.
2024-03-12 Jakub Jelinek <jakub@redhat.com>
PR middle-end/113907
* ipa-icf.cc (sem_item_optimizer::merge_classes): Reset
SSA_NAME_RANGE_INFO and SSA_NAME_PTR_INFO on successfully ICF merged
functions.
Xi Ruoyao [Wed, 13 Mar 2024 12:44:38 +0000 (20:44 +0800)]
LoongArch: Remove unused and incorrect "sge<u>_<X:mode><GPR:mode>" define_insn
If this insn is really used, we'll have something like
slti $r4,$r0,$r5
in the code. The assembler will reject it because slti wants 2
register operands and 1 immediate operand. But we've not got any bug
report for this, indicating this define_insn is unused at all.
Note that do_store_flag (in expr.cc) is already converting x >= 1 to
x > 0 unconditionally, so this define_insn is indeed unused and we can
just remove it.
Jakub Jelinek [Thu, 14 Mar 2024 13:09:20 +0000 (14:09 +0100)]
aarch64: Fix TImode __sync_*_compare_and_exchange expansion with LSE [PR114310]
The following testcase ICEs with LSE atomics.
The problem is that the @atomic_compare_and_swap<mode> expander uses
aarch64_reg_or_zero predicate for the desired operand, which is fine,
given that for most of the modes and even for TImode in some cases
it can handle zero immediate just fine, but the TImode
@aarch64_compare_and_swap<mode>_lse just uses register_operand for
that operand instead, again intentionally so, because the casp,
caspa, caspl and caspal instructions need to use a pair of consecutive
registers for the operand and xzr is just one register and we can't
just store zero into the link register to emulate pair of zeros.
So, the following patch fixes that by forcing the newval operand into
a register for the TImode LSE case.
2024-03-14 Jakub Jelinek <jakub@redhat.com>
PR target/114310
* config/aarch64/aarch64.cc (aarch64_expand_compare_and_swap): For
TImode force newval into a register.
Juergen Christ [Wed, 25 Oct 2023 12:57:03 +0000 (14:57 +0200)]
s390: fix htm-builtins test cases
Transactional and non-transactional stores to the same cache line cause
transactions to abort on newer generations. Add sufficient padding to make
sure another cache line is used.
Lewis Hyatt [Tue, 12 Dec 2023 22:46:36 +0000 (17:46 -0500)]
libcpp: Fix macro expansion for argument of __has_include [PR110558]
When the file name for a #include directive is the result of stringifying a
macro argument, libcpp needs to take some care to get the whitespace
correct; in particular stringify_arg() needs to see a CPP_PADDING token
between macro tokens so that it can figure out when to output space between
tokens. The CPP_PADDING tokens are not normally generated when handling a
preprocessor directive, but for #include-like directives, libcpp sets the
state variable pfile->state.directive_wants_padding to TRUE so that the
CPP_PADDING tokens will be output, and then everything works fine for
computed includes.
As the PR points out, things do not work fine for __has_include. Fix that by
setting the state variable the same as is done for #include.
libcpp/ChangeLog:
PR preprocessor/110558
* macro.cc (builtin_has_include): Set
pfile->state.directive_wants_padding prior to lexing the
file name, in case it comes from macro expansion.
gcc/testsuite/ChangeLog:
PR preprocessor/110558
* c-c++-common/cpp/has-include-2.c: New test.
* c-c++-common/cpp/has-include-2.h: New test.
Lewis Hyatt [Wed, 20 Dec 2023 21:27:42 +0000 (16:27 -0500)]
libcpp: Fix __has_include_next ICE in the last directory of the path [PR80755]
In libcpp/files.cc, the function _cpp_has_header(), which implements
__has_include and __has_include_next, does not check for a NULL return value
from search_path_head(), leading to an ICE tripping an assert when
_cpp_find_file() tries to use it. Fix it by checking for that case and
silently returning false instead.
As suggested by the PR author, it is easiest to make a testcase by using
the -idirafter option. To enable that, also modify the dg-additional-options
testsuite procedure to make the global $srcdir available, since -idirafter
requires the full path.
libcpp/ChangeLog:
PR preprocessor/80755
* files.cc (search_path_head): Add SUPPRESS_DIAGNOSTIC argument
defaulting to false.
(_cpp_has_header): Silently return false if the search path has been
exhausted, rather than issuing a diagnostic and then hitting an
assert.
gcc/testsuite/ChangeLog:
* lib/gcc-defs.exp (dg-additional-options): Make $srcdir usable in a
dg-additional-options directive.
* c-c++-common/cpp/has-include-next-2-dir/has-include-next-2.h: New test.
* c-c++-common/cpp/has-include-next-2.c: New test.
Gaius Mulley [Thu, 14 Mar 2024 11:23:42 +0000 (11:23 +0000)]
PR modula2/114333 set type comparison against a cardinal should cause an error
The type checker M2Check.mod needs extending to detect if a set, array or
record is in either operand at the end of the cascaded test list.
gcc/m2/ChangeLog:
PR modula2/114333
* gm2-compiler/M2Check.mod (checkUnbounded): New procedure
function.
(checkArrayTypeEquivalence): Extend checking to cover unbounded
arrays, arrays and constants.
(IsTyped): Simplified the expression and corrected a test for
IsConstructor.
(checkTypeKindViolation): New procedure function.
(doCheckPair): Call checkTypeKindViolation.
* gm2-compiler/M2GenGCC.mod (CodeStatement): Remove parameters
to CodeEqu and CodeNotEqu.
(PerformCodeIfEqu): New procedure.
(CodeIfEqu): Rewrite.
(PerformCodeIfNotEqu): New procedure.
(CodeIfNotEqu): Rewrite.
* gm2-compiler/M2Quads.mod (BuildRelOpFromBoolean): Correct
comment.
gcc/testsuite/ChangeLog:
PR modula2/114333
* gm2/cse/pass/testcse54.mod: New test.
* gm2/iso/run/pass/array9.mod: New test.
* gm2/iso/run/pass/strcons3.mod: New test.
* gm2/iso/run/pass/strcons4.mod: New test.
* gm2/pim/fail/badset1.mod: New test.
* gm2/pim/fail/badset2.mod: New test.
* gm2/pim/fail/badset3.mod: New test.
* gm2/pim/fail/badset4.mod: New test.
Chung-Lin Tang [Thu, 14 Mar 2024 10:39:52 +0000 (10:39 +0000)]
OpenACC 2.7: front-end support for readonly modifier
This patch implements the front-end support for the 'readonly' modifier for the
OpenACC 'copyin' clause and 'cache' directive.
This currently only includes front-end parsing for C/C++/Fortran and setting of
new bits OMP_CLAUSE_MAP_READONLY, OMP_CLAUSE__CACHE__READONLY. Further linking
of these bits to points-to analysis and/or utilization of read-only memory in
accelerator target are for later patches.
gcc/c/ChangeLog:
* c-parser.cc (c_parser_oacc_data_clause): Add parsing support for
'readonly' modifier, set OMP_CLAUSE_MAP_READONLY if readonly modifier
found, update comments.
(c_parser_oacc_cache): Add parsing support for 'readonly' modifier,
set OMP_CLAUSE__CACHE__READONLY if readonly modifier found, update
comments.
gcc/cp/ChangeLog:
* parser.cc (cp_parser_oacc_data_clause): Add parsing support for
'readonly' modifier, set OMP_CLAUSE_MAP_READONLY if readonly modifier
found, update comments.
(cp_parser_oacc_cache): Add parsing support for 'readonly' modifier,
set OMP_CLAUSE__CACHE__READONLY if readonly modifier found, update
comments.
gcc/fortran/ChangeLog:
* dump-parse-tree.cc (show_omp_namelist): Print "readonly," for
OMP_LIST_MAP and OMP_LIST_CACHE if n->u.map.readonly is set.
Adjust 'n->u.map_op' to 'n->u.map.op'.
* gfortran.h (typedef struct gfc_omp_namelist): Adjust map_op as
'ENUM_BITFIELD (gfc_omp_map_op) op:8', add 'bool readonly' field,
change to named struct field 'map'.
* openmp.cc (gfc_match_omp_map_clause): Adjust 'n->u.map_op' to
'n->u.map.op'.
(gfc_match_omp_clause_reduction): Likewise.
(gfc_match_omp_clauses): Add readonly modifier parsing for OpenACC
copyin clause, set 'n->u.map.op' and 'n->u.map.readonly' for parsed
clause. Adjust 'n->u.map_op' to 'n->u.map.op'.
(gfc_match_oacc_declare): Adjust 'n->u.map_op' to 'n->u.map.op'.
(gfc_match_oacc_cache): Add readonly modifier parsing for OpenACC
cache directive.
(resolve_omp_clauses): Adjust 'n->u.map_op' to 'n->u.map.op'.
* trans-decl.cc (add_clause): Adjust 'n->u.map_op' to 'n->u.map.op'.
(finish_oacc_declare): Likewise.
* trans-openmp.cc (gfc_trans_omp_clauses): Set OMP_CLAUSE_MAP_READONLY,
OMP_CLAUSE__CACHE__READONLY to 1 when readonly is set. Adjust
'n->u.map_op' to 'n->u.map.op'.
(gfc_add_clause_implicitly): Adjust 'n->u.map_op' to 'n->u.map.op'.
gcc/ChangeLog:
* tree.h (OMP_CLAUSE_MAP_READONLY): New macro.
(OMP_CLAUSE__CACHE__READONLY): New macro.
* tree-core.h (struct GTY(()) tree_base): Adjust comments for new
uses of readonly_flag bit in OMP_CLAUSE_MAP_READONLY and
OMP_CLAUSE__CACHE__READONLY.
* tree-pretty-print.cc (dump_omp_clause): Add support for printing
OMP_CLAUSE_MAP_READONLY and OMP_CLAUSE__CACHE__READONLY.
gcc/testsuite/ChangeLog:
* c-c++-common/goacc/readonly-1.c: New test.
* gfortran.dg/goacc/readonly-1.f90: New test.
Andreas Krebbel [Thu, 14 Mar 2024 08:54:31 +0000 (09:54 +0100)]
IBM Z: Fix -munaligned-symbols
With this fix we make sure that only symbols with a natural alignment
smaller than 2 are considered misaligned with
-munaligned-symbols. Background is that -munaligned-symbols is only
supposed to affect symbols whose natural alignment wouldn't be enough
to fulfill our ABI requirement of having all symbols at even
addresses. Because only these are the cases where we differ from other
architectures.
gcc/ChangeLog:
* config/s390/s390.cc (s390_encode_section_info): Adjust the check
for misaligned symbols.
* config/s390/s390.opt: Improve documentation.
gcc/testsuite/ChangeLog:
* gcc.target/s390/aligned-1.c: Add weak and void variables
incorporating the cases from unaligned-2.c.
* gcc.target/s390/unaligned-1.c: Likewise.
* gcc.target/s390/unaligned-2.c: Removed.
Jakub Jelinek [Thu, 14 Mar 2024 08:57:13 +0000 (09:57 +0100)]
gimple-iterator: Some gsi_safe_insert_*before fixes
When trying to use the gsi_safe_insert*before APIs in bitint lowering,
I've discovered 3 issues and the following patch addresses those:
1) both split_block and split_edge update CDI_DOMINATORS if they are
available, but because edge_before_returns_twice_call first splits
and then adds an extra EDGE_ABNORMAL edge and then removes another
one, the immediate dominators of both the new bb and the bb with
returns_twice call need to change
2) the new EDGE_ABNORMAL edge had uninitialized probability; this patch
copies the probability from the edge that is going to be removed
and similarly copies other flags (EDGE_EXECUTABLE, EDGE_DFS_BACK,
EDGE_IRREDUCIBLE_LOOP etc.)
3) if edge_before_returns_twice_call splits a block, then the bb with
returns_twice call changes, so the gimple_stmt_iterator for it is
no longer accurate, it points to the right statement, but gsi_bb
and gsi_seq are no longer correct; the patch updates it
2024-03-14 Jakub Jelinek <jakub@redhat.com>
* gimple-iterator.cc (edge_before_returns_twice_call): Copy all
flags and probability from ad_edge to e edge. If CDI_DOMINATORS
are computed, recompute immediate dominator of other_edge->src
and other_edge->dest.
(gsi_safe_insert_before, gsi_safe_insert_seq_before): Update *iter
for the returns_twice call case to the gsi_for_stmt (stmt) to deal
with update it for bb splitting.
we must copy the REG_EH_REGION note to the first insn and split the block
after the newly added insn. The REG_EH_REGION on the second insn will be
removed later since it no longer traps.
Jonathan Wakely [Wed, 13 Mar 2024 10:02:12 +0000 (10:02 +0000)]
libstdc++: Move test error_category to global scope
A recent GDB change causes this test to fail due to missing RTTI for the
custom_cast type. This is presumably because the custom_cat type was
defined as a local class, so has no linkage. Moving it to local scope
seems to fix the test regressions, and probably makes the test more
realistic as a local class with no linkage isn't practical to use as an
error category that almost certainly needs to be referred to in other
scopes.
libstdc++-v3/ChangeLog:
* testsuite/libstdc++-prettyprinters/cxx11.cc: Move custom_cat
to namespace scope.
Jonathan Wakely [Thu, 7 Mar 2024 15:19:12 +0000 (15:19 +0000)]
libstdc++: Improve documentation on debugging with libstdc++
libstdc++-v3/ChangeLog:
* doc/xml/manual/debug.xml: Improve docs on debug builds and
using ASan. Mention _GLIBCXX_ASSERTIONS. Reorder sections to put
the most relevant ones first.
* doc/xml/manual/using.xml: Add comma.
* doc/html/*: Regenerate.
Jonathan Wakely [Thu, 7 Mar 2024 12:00:55 +0000 (12:00 +0000)]
libstdc++: Document that _GLIBCXX_CONCEPT_CHECKS might be removed in future
The macro-based concept checks are unmaintained and do not support C++11
or later, so reject valid code. If nobody plans to update them we should
consider removing them. Alternatively, we could ignore the macro for
C++11 and later, so they have no effect and don't reject valid code.
libstdc++-v3/ChangeLog:
* doc/xml/manual/debug.xml: Document that concept checking might
be removed in future.
* doc/xml/manual/extensions.xml: Likewise.
Jakub Jelinek [Wed, 13 Mar 2024 14:34:59 +0000 (15:34 +0100)]
store-merging: Match bswap64 on 32-bit targets with bswapsi2 [PR114319]
gimple-ssa-store-merging.cc tests bswap_optab in 3 different places,
in 2 of them it has special exception for double-word bswap using pair
of word-mode bswap optabs, but in the last one it doesn't.
The following patch changes even the last spot.
We don't handle 128-bit bswaps in the passes at all, because currently we
just use uint64_t to represent the byte reshuffling (we'd need to use
offset_int or something like that instead) and we don't have
__builtin_bswap128 nor type-generic __builtin_bswap, so there is nothing
for 64-bit targets there.
2024-03-13 Jakub Jelinek <jakub@redhat.com>
PR middle-end/114319
* gimple-ssa-store-merging.cc
(imm_store_chain_info::try_coalesce_bswap): For 32-bit targets
allow matching __builtin_bswap64 if there is bswapsi2 optab.
On arm-none-eabi, the test case fails with below warning on GCC13
.../null-deref-pr108251-smp_fetch_ssl_fc_has_early-O2.c:63:65: warning: converting a packed 'enum obj_type' pointer (alignment 1) to a 'struct connection' pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
Add a dg-bogus to ensure that the warning is not reintroduced.
gcc/testsuite/ChangeLog:
* c-c++-common/analyzer/null-deref-pr108251-smp_fetch_ssl_fc_has_early-O2.c:
Added dg-bogus with target on offending line for short_enums.
Starting with r14-2047-gd0e891406b16dc two SI mode tests are optimized
into DI mode. Thus, the scan-assembler directives fail. For example
RTL expression
Fixed by moving operands into memory in order to enforce SI mode
computation.
Furthermore, in r9-6056-g290dfd9bc7bea2 the starting bit position of the
scan-assembler directive for rosbg was incorrectly set to 32 which
actually should be 32+SHIFT_AMOUNT, i.e., in this particular case 34.
gcc/testsuite/ChangeLog:
* gcc.target/s390/md/rXsbg_mode_sXl.c: Fix tests rosbg_si_srl
and rxsbg_si_srl.
Similar as to s390_lcbb, s390_vll, s390_vstl, et al. make use of a
signed vector type for vlbb. Furthermore, a const void pointer seems
more common and an integer for the mask.
For s390_vfi(s,d)b make use of integers for masks, too.
Use unsigned integers for all s390_vlbr/vstbr variants.
Make use of type UV16QI for the length operand of s390_vstrs(,z)(h,f).
Following the Principles of Operation, change from signed to unsigned
type for s390_va(c,cc,ccc)q and s390_vs(,c,bc)biq and s390_vmslg.
Make use of scalar type UINT128 instead of UV16QI for s390_vgfm(,a)g,
and s390_vsumq(f,g).
gcc/ChangeLog:
* config/s390/s390-builtin-types.def: Update to reflect latest
changes.
* config/s390/s390-builtins.def: Streamline vector builtins with
LLVM.
Jakub Jelinek [Wed, 13 Mar 2024 09:19:04 +0000 (10:19 +0100)]
bitint: Fix up lowering of bitfield loads/stores [PR114313]
The following testcase ICEs, because for large/huge _BitInt bitfield
loads/stores we use the DECL_BIT_FIELD_REPRESENTATIVE as the underlying
"var" and indexes into it can be larger than the precision of the
bitfield might normally allow.
The following patch fixes that by passing NULL_TREE type in that case
to limb_access, so that we always return m_limb_type type and don't
do the extra assertions, after all, the callers expect that too.
I had to add the first hunk to avoid ICE, it was using type in one place
even when it was NULL. But TYPE_SIZE (TREE_TYPE (var)) seems like the
right size to use anyway because the code uses VIEW_CONVERT_EXPR on it.
2024-03-13 Jakub Jelinek <jakub@redhat.com>
PR middle-end/114313
* gimple-lower-bitint.cc (bitint_large_huge::limb_access): Use
TYPE_SIZE of TREE_TYPE (var) rather than TYPE_SIZE of type.
(bitint_large_huge::handle_load): Pass NULL_TREE rather than
rhs_type to limb_access for the bitfield load cases.
(bitint_large_huge::lower_mergeable_stmt): Pass NULL_TREE rather than
lhs_type to limb_access if nlhs is non-NULL.
Tobias Burnus [Wed, 13 Mar 2024 08:35:28 +0000 (09:35 +0100)]
OpenMP/Fortran: Fix defaultmap(none) issue with dummy procedures [PR114283]
Dummy procedures look similar to variables but aren't - neither in Fortran
nor in OpenMP. As the middle end sees PARM_DECLs, mark them as predetermined
firstprivate for mapping (as already done in gfc_omp_predetermined_sharing).
This does not address the isses related to procedure pointers, which are
still discussed on spec level [see PR].
PR fortran/114283
gcc/fortran/ChangeLog:
* trans-openmp.cc (gfc_omp_predetermined_mapping): Map dummy
procedures as firstprivate.
libgomp/ChangeLog:
* testsuite/libgomp.fortran/declare-target-indirect-4.f90: New test.
Jakub Jelinek [Wed, 13 Mar 2024 08:19:05 +0000 (09:19 +0100)]
asan: Fix ICE during instrumentation of returns_twice calls [PR112709]
The following patch on top of the previously posted ubsan/gimple-iterator
one handles asan the same. While the case of returning by hidden reference
is handled differently because of the first recently posted asan patch,
this deals with instrumentation of the aggregates returned in registers
case as well as instrumentation of loads from aggregate memory in the
function arguments of returns_twice calls.
2024-03-13 Jakub Jelinek <jakub@redhat.com>
PR sanitizer/112709
* asan.cc (maybe_create_ssa_name, maybe_cast_to_ptrmode,
build_check_stmt, maybe_instrument_call, asan_expand_mark_ifn): Use
gsi_safe_insert_before instead of gsi_insert_before.
Jakub Jelinek [Wed, 13 Mar 2024 08:16:45 +0000 (09:16 +0100)]
gimple-iterator, ubsan: Fix ICE during instrumentation of returns_twice calls [PR112709]
ubsan, asan (both PR112709) and _BitInt lowering (PR113466) want to
insert some instrumentation or adjustment statements before some statement.
This unfortunately creates invalid IL if inserting before a returns_twice
call, because we require that such calls are the first statement in a basic
block and that we have an edge from the .ABNORMAL_DISPATCHER block to
the block containing the returns_twice call (in addition to other edge(s)).
The following patch adds helper functions for such insertions and uses it
for now in ubsan (I'll post a follow up which uses it in asan and will
work later on the _BitInt lowering PR).
In particular, if the bb with returns_twice call at the start has just
2 edges, one EDGE_ABNORMAL from .ABNORMAL_DISPATCHER and another
(non-EDGE_ABNORMAL/EDGE_EH) from some other bb, it just inserts the
statement or sequence on that other edge.
If the bb has more predecessor edges or the one not from
.ABNORMAL_DISPATCHER is e.g. an EH edge (this latter case likely shouldn't
happen, one would need labels or something like that), the patch splits the
block with returns_twice call such that there is just one edge next to
.ABNORMAL_DISPATCHER edge and adjusts PHIs as needed to make it happen.
The functions also replace uses of PHIs from the returns_twice bb with
the corresponding PHI arguments, because otherwise it would be invalid IL.
E.g. in ubsan/pr112709-2.c (qux) we have before the ubsan pass
<bb 10> :
# .MEM_5(ab) = PHI <.MEM_4(9), .MEM_25(ab)(11)>
# _7(ab) = PHI <_20(9), _8(ab)(11)>
# .MEM_21(ab) = VDEF <.MEM_5(ab)>
_22 = bar (*_7(ab));
where bar is returns_twice call and bb 11 has .ABNORMAL_DISPATCHER call,
this patch instruments it like:
<bb 9> :
# .MEM_4 = PHI <.MEM_17(ab)(4), .MEM_10(D)(5), .MEM_14(ab)(8)>
# DEBUG BEGIN_STMT
# VUSE <.MEM_4>
_20 = p;
# .MEM_27 = VDEF <.MEM_4>
.UBSAN_NULL (_20, 0B, 0);
# VUSE <.MEM_27>
_2 = __builtin_dynamic_object_size (_20, 0);
# .MEM_28 = VDEF <.MEM_27>
.UBSAN_OBJECT_SIZE (_20, 1024, _2, 0);
<bb 10> :
# .MEM_5(ab) = PHI <.MEM_28(9), .MEM_25(ab)(11)>
# _7(ab) = PHI <_20(9), _8(ab)(11)>
# .MEM_21(ab) = VDEF <.MEM_5(ab)>
_22 = bar (*_7(ab));
The edge from .ABNORMAL_DISPATCHER is there just to represent the
returning for 2nd and later times, the instrumentation can't be
done at that point as there is no code executed during that point.
The ubsan/pr112709-1.c testcase includes non-virtual PHIs to cover
the handling of those as well.
2024-03-13 Jakub Jelinek <jakub@redhat.com>
PR sanitizer/112709
* gimple-iterator.h (gsi_safe_insert_before,
gsi_safe_insert_seq_before): Declare.
* gimple-iterator.cc: Include gimplify.h.
(edge_before_returns_twice_call, adjust_before_returns_twice_call,
gsi_safe_insert_before, gsi_safe_insert_seq_before): New functions.
* ubsan.cc (instrument_mem_ref, instrument_pointer_overflow,
instrument_nonnull_arg, instrument_nonnull_return): Use
gsi_safe_insert_before instead of gsi_insert_before.
(maybe_instrument_pointer_overflow): Use force_gimple_operand,
gimple_seq_add_seq_without_update and gsi_safe_insert_seq_before
instead of force_gimple_operand_gsi.
(instrument_object_size): Likewise. Use gsi_safe_insert_before
instead of gsi_insert_before.
* gcc.dg/ubsan/pr112709-1.c: New test.
* gcc.dg/ubsan/pr112709-2.c: New test.
Harald Anlauf [Mon, 11 Mar 2024 21:05:51 +0000 (22:05 +0100)]
Fortran: handle procedure pointer component in DT array [PR110826]
gcc/fortran/ChangeLog:
PR fortran/110826
* array.cc (gfc_array_dimen_size): When walking the ref chain of an
array and the ultimate component is a procedure pointer, do not try
to figure out its dimension even if it is a array-valued function.
gcc/testsuite/ChangeLog:
PR fortran/110826
* gfortran.dg/proc_ptr_comp_53.f90: New test.
Tobias Burnus [Tue, 12 Mar 2024 14:42:50 +0000 (15:42 +0100)]
libgomp/libgomp.texi: Fix @node order in @menu
While texinfo 7.0.3 does not warn, an older texinfo did complain about:
libgomp.texi:1964: warning: node next `omp_target_memcpy' in menu
`omp_target_memcpy_rect' and in sectioning `omp_target_memcpy_async' differ
libgomp/
* libgomp.texi (Device Memory Routines): Swap item order to match
the order of the '@node's of the '@subsection's.
git://gcc.gnu.org / gcc.git / log