Lots going on in here. The key is the nonconstant value is zero extended from
SI to DI in the original RTL and we know the constant value is unchanged if we
were to sign extend it from 32 to 64 bits.
We change the extension of the nonconstant operand from zero to sign extension.
I'm pretty confident the goal there is take advantage of the fact that SI
values are kept sign extended and will often be optimized away.
The problem occurs when the nonconstant operand has the SI sign bit set. As an
example:
smax (0x8000000, 0x7) resulting in 0x80000000
The split RTL will generate
smax (sign_extend (0x80000000), 0x7))
smax (0xffffffff80000000, 0x7) resulting in 0x7
Opps.
We really needed to change the opcode to umax for this transformation to work.
That's easy enough. But there's further improvements we can make.
First the pattern is a define_and_split with a post-reload split condition. It
would be better implemented as a 4->3 define_split so that the costing model
just works. Second, if operands[1] is a suitably promoted subreg, then we can
elide the sign extension when we generate the split code, so often it'll be a
4->2 split, again with the cost model working with no adjustments needed.
Tested on rv32 and rv64 in my tester. I'll wait for the pre-commit tester to
spin it as well.
PR target/116085
gcc/
* config/riscv/bitmanip.md (minmax extension avoidance splitter):
Rewrite as a simpler define_split. Adjust the opcode appropriately.
Avoid emitting sign extension if it's clearly not needed.
* config/riscv/iterators.md (minmax_optab): Rename to uminmax_optab
and map everything to unsigned variants.
gcc/testsuite/
* gcc.target/riscv/pr116085.c: New test.
The code to scale ranges for wide chars in format_string incorrectly
checks range.likely to scale range.unlikely, which is a copy-paste typo
from the immediate previous condition.
gcc/ChangeLog:
* gimple-ssa-sprintf.cc (format_string): Fix type in range check
for UNLIKELY for wide chars.
Andrew Pinski [Mon, 22 Jul 2024 22:39:37 +0000 (15:39 -0700)]
aarch64: sve: Rename aarch64_bic to standard pattern, andn
Now there is an optab for bic, andn since r15-1890-gf379596e0ba99d.
This moves aarch64_bic for sve over to use it instead.
Note unlike the simd bic patterns, the operands were already
in the order that was expected for the optab so no swapping
was needed.
Built and tested on aarch64-linux-gnu with no regressions.
gcc/ChangeLog:
* config/aarch64/aarch64-sve-builtins-base.cc (svbic_impl::expand): Update
to use andn optab instead of using code_for_aarch64_bic.
* config/aarch64/aarch64-sve.md (@aarch64_bic<mode>): Rename to ...
(andn<mode>3): This.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
Andrew Pinski [Mon, 22 Jul 2024 23:18:47 +0000 (16:18 -0700)]
aarch64: Use iorn and andn standard pattern names for scalar modes
Since r15-1890-gf379596e0ba99d, these are the new optabs.
So let's use these names for them. These will be used to
generate during expand from gimple in the next few patches.
Built and tested for aarch64-linux-gnu with no regressions.
gcc/ChangeLog:
* config/aarch64/aarch64.md (*<NLOGICAL:optab>_one_cmpl<mode>3): Rename to ...
(<NLOGICAL:optab>n<mode>3): This.
(*<NLOGICAL:optab>_one_cmplsidi3_ze): Rename to ...
(*<NLOGICAL:optab>nsidi3_ze): This.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
Andrew Pinski [Mon, 22 Jul 2024 18:19:11 +0000 (11:19 -0700)]
aarch64: Rename bic/orn patterns to iorn/andn for vector modes
This renames the patterns orn<mode>3 to iorn<mode>3 so it
matches the new optab that was added with r15-1890-gf379596e0ba99d.
Likewise for bic<mode>3 to andn<mode>3.
Note the operand 1 and operand 2 are swapped from the original
patterns to match the optab now.
Built and tested for aarch64-linux-gnu with no regression.
gcc/ChangeLog:
* config/aarch64/aarch64-simd.md
(bic<mode>3<vczle><vczbe>): Rename to ...
(andn<mode>3<vczle><vczbe>): This. Also swap operands.
(orn<mode>3<vczle><vczbe>): Rename to ...
(iorn<mode>3<vczle><vczbe>): This. Also swap operands.
(vec_cmp<mode><v_int_equiv>): Update orn call to iorn
and swap the last two arguments.
gcc/testsuite/ChangeLog:
* g++.target/aarch64/vect_cmp-1.C: New test.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
Andrew Pinski [Thu, 25 Jul 2024 16:37:49 +0000 (09:37 -0700)]
aarch64: Fix target/optimize option handling with transiting between O1 to O2
The problem here is the aarch64 backend enables -mearly-ra at -O2 and above but
it is not marked as an Optimization in the .opt file so enabling it sometimes
reset the target options when going from -O1 to -O2 for the first time.
Build and tested for aarch64-linux-gnu with no regressions.
PR target/116065
gcc/ChangeLog:
* config/aarch64/aarch64.opt (mearly-ra=): Mark as Optimization rather
than Save.
gcc/testsuite/ChangeLog:
* gcc.target/aarch64/sve/target_optimization-1.c: New test.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
Andrew Pinski [Fri, 26 Jul 2024 00:43:07 +0000 (17:43 -0700)]
isel: Don't duplicate comparisons for -O0 nor -fno-tree-ter [PR116101]
While doing cleanups on this code I noticed that we do the duplicate
of comparisons at -O0. For C and C++ code this makes no difference as
the gimplifier never produces COND_EXPR. But it could make a difference
for other front-ends.
Oh and for -fno-tree-ter, duplicating the comparison is just a waste
as it is never used for expand.
I also decided to add a few testcases so this is checked in the future.
Even added one for the duplication itself.
Bootstrapped and tested on x86_64-linux-gnu with no regressions.
PR tree-optimization/116101
gcc/ChangeLog:
* gimple-isel.cc (maybe_duplicate_comparison): Don't
do anything for -O0 or -fno-tree-ter.
gcc/testsuite/ChangeLog:
* gcc.dg/tree-ssa/dup_compare_cond-1.c: New test.
* gcc.dg/tree-ssa/dup_compare_cond-2.c: New test.
* gcc.dg/tree-ssa/dup_compare_cond-3.c: New test.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
Andrew Pinski [Fri, 26 Jul 2024 00:07:28 +0000 (17:07 -0700)]
isel: Small cleanup of duplicating comparisons
This is a small cleanup of the duplicating comparison code.
There is code generation difference but only for -O0 and -fno-tree-ter
(both of which will be fixed in a later patch).
The difference is instead of skipping the first use if the
comparison uses are only in cond_expr we skip the last use.
Also we go through the uses list in the opposite order now too.
The cleanups are the following:
* Don't call has_single_use as we will do the loop anyways
* Change the order of the checks slightly, it is better
to check for cond_expr earlier
* Use cond_exprs as a stack and pop from it.
Skipping the top if the use is only from cond_expr.
Bootstrapped and tested on x86_64-linux-gnu with no regressions.
gcc/ChangeLog:
* gimple-isel.cc (duplicate_comparison): Rename to ...
(maybe_duplicate_comparison): This. Add check for use here
rather than in its caller.
(pass_gimple_isel::execute): Don't check how many uses the
comparison had and call maybe_duplicate_comparison instead of
duplicate_comparison.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
Andrew Pinski [Thu, 25 Jul 2024 23:17:15 +0000 (16:17 -0700)]
isel: Move duplicate comparisons to its own function
This is just a small cleanup to isel and no functional changes just.
The loop inside pass_gimple_isel::execute looked was getting too
deap so let's fix that by moving it to its own function.
Bootstrapped and tested on x86_64-linux-gnu with no regressions.
gcc/ChangeLog:
* gimple-isel.cc (pass_gimple_isel::execute): Factor out
duplicate comparisons out to ...
(duplicate_comparison): New function.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
The "tail call must be the same type" message is common on some
targets with C++, or without optimization. It is generated
when gcc believes there is an access of the return value
after the call. However usually it does not actually corespond
to a type mismatch, but can be caused for other reasons.
Make it slightly more vague to be less misleading.
- Run the target_effective tail_call checks without optimization to
match the actual test cases.
- Add an extra check for external tail calls to handle targets like
powerpc that cannot tail call between different object files.
This one will also cover templates.
Robin Dapp [Fri, 26 Jul 2024 10:58:38 +0000 (12:58 +0200)]
RISC-V: Work around bare apostrophe in error string.
An unquoted apostrophe slipped through when testing the recent
V/M extension patch. This, again, re-words the message to
"Currently the 'V' implementation requires the 'M' extension".
Going to commit as obvious after testing.
gcc/ChangeLog:
* config/riscv/riscv.cc (riscv_override_options_internal):
Reword error string without apostrophe.
Tamar Christina [Fri, 26 Jul 2024 12:02:53 +0000 (13:02 +0100)]
middle-end: check for vector mode before calling get_mask_mode [PR116074]
For historical reasons AArch64 has TI mode vector types but does not consider
TImode a vector mode.
What's happening in the PR is that get_vectype_for_scalar_type is returning
vector(1) TImode for a TImode scalar. This then fails when we call
targetm.vectorize.get_mask_mode (vecmode).exists (&) on the TYPE_MODE.
This checks for vector mode before using the results of
get_vectype_for_scalar_type.
For AMX instructions related with memory, we will treat the memory
size as not specified since there won't be different size causing
confusion for memory.
This will change the output under Intel mode, which is broken for now when
using with assembler and aligns to current binutils behavior.
Bootstrapped and regtested on x86-64-pc-linux-gnu. Ok for trunk?
Thx,
Haochen
gcc/ChangeLog:
* config/i386/i386-expand.cc (ix86_expand_builtin): Change
from XImode to BLKmode.
* config/i386/i386.md (ldtilecfg): Change XI to BLK.
(sttilecfg): Ditto.
Currently we don't stream the contents of 'nowarn_map'; this means that
warning suppressions don't get applied in importers, which is
particularly relevant for templates (as in the linked testcase).
Rather than streaming the whole contents of 'nowarn_map', this patch
instead just streams the exported suppressions for each tree node
individually, to not build up additional locations and suppressions for
tree nodes that do not need to be streamed.
PR c++/115757
gcc/cp/ChangeLog:
* module.cc (trees_out::core_vals): Write warning specs for
DECLs and EXPRs.
(trees_in::core_vals): Read warning specs.
gcc/ChangeLog:
* tree.h (put_warning_spec_at): Declare new function.
(has_warning_spec): Likewise.
(get_warning_spec): Likewise.
(put_warning_spec): Likewise.
* diagnostic-spec.h (nowarn_spec_t::from_bits): New function.
* diagnostic-spec.cc (put_warning_spec_at): New function.
* warning-control.cc (has_warning_spec): New function.
(get_warning_spec): New function.
(put_warning_spec): New function.
gcc/testsuite/ChangeLog:
* g++.dg/modules/warn-spec-1_a.C: New test.
* g++.dg/modules/warn-spec-1_b.C: New test.
Jason Merrill [Thu, 25 Jul 2024 21:36:09 +0000 (17:36 -0400)]
c++: #pragma target and deferred instantiation [PR115403]
My patch for 109753 applies the current #pragma target/optimize to a
function when we compile it, which was a problem for a template
instantiation deferred until EOF, where different #pragmas are active. So
let's only do this for artificial functions.
PR c++/115403
PR c++/109753
gcc/cp/ChangeLog:
* decl.cc (start_preparsed_function): Only call decl_attributes for
artificial functions.
Patrick Palka [Thu, 25 Jul 2024 23:05:19 +0000 (19:05 -0400)]
c++: non-template alias with dependent attributes [PR115897]
This patch generalizes our support for dependent attributes on alias
templates to also support them on non-template aliases. The main
addition is a new predicate dependent_opaque_alias_p controlling whether
we can treat an alias (template or non-template) as type-equivalent to
its expansion.
PR c++/115897
gcc/cp/ChangeLog:
* cp-tree.h (dependent_opaque_alias_p): Declare.
* pt.cc (push_template_decl): Manually mark a dependent opaque
alias or dependent alias template specialization as dependent,
and use structural equality for them.
(dependent_opaque_alias_p): Define.
(alias_template_specialization_p): Don't look through an
opaque alias.
(complex_alias_template_p): Use dependent_opaque_alias_p instead of
any_dependent_template_arguments_p directly.
(dependent_alias_template_spec_p): Don't look through an
opaque alias.
(get_underlying_template): Use dependent_opaque_alias_p instead of
any_dependent_template_arguments_p.
(instantiate_alias_template): Mention same logic in
push_template_decl.
(dependent_type_p_r): Remove dependent_alias_template_spec_p check.
(any_template_arguments_need_structural_equality_p): Return true
for a dependent opaque alias.
(alias_ctad_tweaks): Use template_args_equal instead of same_type_p
followed by dependent_alias_template_spec_p.
* tree.cc (strip_typedefs): Don't strip an opaque alias.
* typeck.cc (structural_comptypes): Compare declaration attributes
for an opaque alias.
gcc/testsuite/ChangeLog:
* g++.dg/cpp0x/alias-decl-79.C: Remove xfails.
* g++.dg/cpp0x/alias-decl-79a.C: New test.
Patrick Palka [Thu, 25 Jul 2024 23:00:23 +0000 (19:00 -0400)]
c++: alias of alias tmpl with dependent attrs [PR115897]
As a follow-up to r15-2047-g7954bb4fcb6fa8, we also need to consider
dependent attributes when recursing into a non-template alias that names
a dependent alias template specialization (and so STF_STRIP_DEPENDENT
is set), otherwise in the first testcase below we undesirably strip B
all the way to T instead of to A<T>.
We also need to move the typedef recursion case of strip_typedefs up to
get checked before the compound type recursion cases. Otherwise for C
below (which ultimately aliases T*) we end up stripping it to T* instead
of to A<T*> because the POINTER_TYPE recursion dominates the typedef
recursion. It also means we issue an unexpected extra error in the
third testcase below.
Ideally we would also want to consider dependent attributes on
non-template aliases, so that we accept the second testcase below, but
making that work correctly would require broader changes to e.g.
structural_comptypes.
PR c++/115897
gcc/cp/ChangeLog:
* tree.cc (strip_typedefs): Move up the typedef recursion case.
Never strip a dependent alias template-id that has dependent
attributes.
gcc/testsuite/ChangeLog:
* g++.dg/cpp0x/alias-decl-78.C: New test.
* g++.dg/cpp0x/alias-decl-79.C: New test.
* g++.dg/cpp0x/alias-decl-pr92206-1a.C: New test.
The built-ins set a value in a vector. The same operation can be done
in C-code. The assembly code generated from the C-code is as good or
better than the code generated by the built-ins. With default
optimization the number of assembly generated for the two methods are
similar. With -O3 optimization, the assembly generated for the two
approaches is identical for the 2DF and 2DI types. The assembly for
the C-code version of the 1Ti requires one less assembly instruction.
It also only uses one load versus two loads for the built-in.
With the removal of the built-ins, there are no other uses of the
set built-in attribute. The code associated with the set built-in
attribute is removed.
Finally, the testcase for the __builtin_vsx_set_2df is removed. The
other built-ins do not have testcases.
gcc/ChangeLog:
* config/rs6000/rs6000-builtin.cc (get_element_number,
altivec_expand_vec_set_builtin): Remove functions.
(rs6000_expand_builtin): Remove the if statement to call
altivec_expand_vec_set_builtin.
* config/rs6000/rs6000-builtins.def (__builtin_vsx_set_1ti,
__builtin_vsx_set_2df, __builtin_vsx_set_2di): Remove the
built-in definitions.
* config/rs6000/rs6000-gen-builtins.cc (struct attrinfo):
Remove the isset variable from the structure.
(parse_bif_attrs): Remove the uses of the isset variable.
gcc/testsuite/ChangeLog:
* gcc.target/powerpc/vsx-builtin-3.c: Remove test cases for the
__builtin_vsx_set_2df built-in.
This patch removes the __builtin_vec_set_v1ti, __builtin_vec_set_v2df
and __builtin_vec_set_v2di built-ins. The users should just use
normal C-code to update the various vector elements. This change was
originally intended to be part of the earlier series of cleanup
patches. It was initially thought that some additional work would be
needed to do some gimple generation instead of these built-ins.
However, the existing default code generation does produce the needed
code. For the vec_set bif, the equivalent C code is as good or
better than the built-in. For the vec_insert bif whose resolving
previously made use of the vec_set bif, the assembly code generation
is as good as before with the -O3 optimization.
Remove the built-ins, use the default gimple generation instead.
gcc/ChangeLog:
* config/rs6000/rs6000-builtins.def (__builtin_vec_set_v1ti,
__builtin_vec_set_v2df, __builtin_vec_set_v2di): Remove built-in
definitions.
* config/rs6000/rs6000-c.cc (resolve_vec_insert): Remove the
handling for constant vec_insert position with
VECTOR_UNIT_VSX_P V1TImode, V2DFmode and V2DImode modes.
Carl Love [Tue, 9 Jul 2024 18:09:42 +0000 (14:09 -0400)]
rs6000, remove __builtin_vsx_xvcmp* built-ins
This patch removes the built-ins:
__builtin_vsx_xvcmpeqsp, __builtin_vsx_xvcmpgesp,
__builtin_vsx_xvcmpgtsp.
which are similar to the recommended PVIPR documented overloaded
vec_cmpeq, vec_cmpgt and vec_cmpge built-ins.
The difference is that the overloaded built-ins return a vector of
32-bit booleans. The removed built-ins returned a vector of floats.
The __builtin_vsx_xvcmpeqdp, __builtin_vsx_xvcmpgedp and
__builtin_vsx_xvcmpgtdp are not removed as they are used by the
overloaded vec_cmpeq, vec_cmpgt and vec_cmpge built-ins.
The test cases for the __builtin_vsx_xvcmpeqsp, __builtin_vsx_xvcmpgesp,
__builtin_vsx_xvcmpgtsp, __builtin_vsx_xvcmpeqdp,
__builtin_vsx_xvcmpgedp and __builtin_vsx_xvcmpgtdp are changed to use
the overloaded vec_cmpeq, vec_cmpgt, vec_cmpge built-ins. Use of the
overloaded built-ins requires the result to be stored in a vector of
boolean of the appropriate size or the result must be cast to the return
type used by the original __builtin_vsx_xvcmp* built-ins.
gcc/testsuite/ChangeLog:
* gcc.target/powerpc/vsx-builtin-3.c (do_cmp): Replace
__builtin_vsx_xvcmp{eq,gt,ge}{sp,dp} by vec_cmp{eq,gt,ge}
respectively and add explicit casts to vector {float,double}.
Add more testing code assigning result to vector boolean types.
Jonathan Wakely [Thu, 25 Jul 2024 12:00:09 +0000 (13:00 +0100)]
libstdc++: Implement P2968R2 "Making std::ignore a first-class object"
This was recently approved for C++26, but we can apply the changes for
all modes back to C++11. There's no reason not to make the assignment
usable in constant expressions for C++11 mode, and noexcept for all
modes.
Move the definitions to <bits/utility.h> so they're available in
<utility> as well as <tuple>.
libstdc++-v3/ChangeLog:
* include/bits/utility.h (_Swallow_assign): Make assignment
constexpr for C++11 as well, and add noexcept.
* include/std/tuple (_Swallow_assign, ignore): Move to
bits/utility.h.
* testsuite/20_util/headers/utility/ignore.cc: New test.
Jakub Jelinek [Thu, 25 Jul 2024 19:36:31 +0000 (21:36 +0200)]
c++: Implement C++26 P2558R2 - Add @, $, and ` to the basic character set [PR110343]
The following patch implements the easy parts of the paper.
When @$` are added to the basic character set, it means that
R"@$`()@$`" should now be valid (here I've noticed most of the
raw string tests were tested solely with -std=c++11 or -std=gnu++11
and I've tried to change that), and on the other side even if
by extension $ is allowed in identifiers, \u0024 or \U00000024
or \u{24} should not be, similarly how \u0041 is not allowed.
The paper in 3.1 claims though that
#include <stdio.h>
#define STR(x) #x
int main()
{
printf("%s", STR(\u0060)); // U+0060 is ` GRAVE ACCENT
}
should have been accepted before this paper (and rejected after it),
but g++ rejects it.
I've tried to understand it, but am confused on what is the right
behavior and why.
Neither clang nor gcc emit any diagnostics on the a, c, i and k
initializers, those are certainly valid (c is invalid in C23 though). g++
emits with -pedantic-errors errors on all the others, while clang++ on the
ones with STR involving \u0041, \u0040 and a\u0066d. The chosen values are
\u0040 '@' as something being changed by this paper, \u0041 'A' as basic
character set char valid in identifiers before/after, \u00b7 as an example
of character which is pedantically valid in identifiers if not at the start
and \u066d s something pedantically not valid in identifiers.
Now, https://eel.is/c++draft/lex.charset#6 says that UCN used outside of a
string/character literal which corresponds to basic character set character
(or control character) is ill-formed, that would make d, f, h cases invalid
for C++ and l, n, p cases invalid for C++26.
https://eel.is/c++draft/lex.name states which characters can appear at the
start of the identifier and which can appear after the start. And
https://eel.is/c++draft/lex.pptoken states that preprocessing-token is
either identifier, or tons of other things, or "each non-whitespace
character that cannot be one of the above"
Then https://eel.is/c++draft/lex.pptoken#1 says that this last category is
invalid if the preprocessing token is being converted into token.
And https://eel.is/c++draft/lex.pptoken#2 includes "If any character not in
the basic character set matches the last category, the program is
ill-formed."
Now, e.g. for the C++23 STR(\u0040) case, \u0040 is there not in the basic
character set, so valid outside of the literals (not the case anymore in
C++26), but it isn't nondigit and doesn't have XID_Start property, so it
isn't IMHO an identifier and so must be the "each non-whitespace character
that cannot be one of the above" case. Why doesn't the above mentioned
https://eel.is/c++draft/lex.pptoken#2 sentence make that invalid? Ignoring
that, I'd say it would be then stringized and that feels like it is what
clang++ is doing. Now, e.g. for the STR(a\u066d) case, I wonder why that
isn't lexed as a identifier followed by \u066d "each non-whitespace
character that cannot be one of the above" token and stringified similarly,
clang++ rejects that.
What GCC libcpp seems to be doing is that if that forms_identifier_p calls
_cpp_valid_utf8 or _cpp_valid_ucn with an argument which tells it is first
or second+ in identifier, and e.g. _cpp_valid_ucn then for UCNs valid in
string literals calls
else if (identifier_pos)
{
int validity = ucn_valid_in_identifier (pfile, result, nst);
if (validity == 0)
cpp_error (pfile, CPP_DL_ERROR,
"universal character %.*s is not valid in an identifier",
(int) (str - base), base);
else if (validity == 2 && identifier_pos == 1)
cpp_error (pfile, CPP_DL_ERROR,
"universal character %.*s is not valid at the start of an identifier",
(int) (str - base), base);
}
so basically all those invalid in identifiers cases emit an error and
pretend to be valid in identifiers, rather than what e.g. _cpp_valid_utf8
does for C but not for C++ and only for the chars completely invalid in
identifiers rather than just valid in identifiers but not at the start:
/* In C++, this is an error for invalid character in an identifier
because logically, the UTF-8 was converted to a UCN during
translation phase 1 (even though we don't physically do it that
way). In C, this byte rather becomes grammatically a separate
token. */
if (CPP_OPTION (pfile, cplusplus))
cpp_error (pfile, CPP_DL_ERROR,
"extended character %.*s is not valid in an identifier",
(int) (*pstr - base), base);
else
{
*pstr = base;
return false;
}
The comment doesn't really match what is done in recent C++ versions because
there UCNs are translated to characters and not the other way around.
2024-07-25 Jakub Jelinek <jakub@redhat.com>
PR c++/110343
libcpp/
* lex.cc: C++26 P2558R2 - Add @, $, and ` to the basic character set.
(lex_raw_string): For C++26 allow $@` characters in prefix.
* charset.cc (_cpp_valid_ucn): For C++26 reject \u0024 in identifiers.
gcc/testsuite/
* c-c++-common/raw-string-1.c: Use { c || c++11 } effective target,
remove c++ specific dg-options.
* c-c++-common/raw-string-2.c: Likewise.
* c-c++-common/raw-string-4.c: Likewise.
* c-c++-common/raw-string-5.c: Likewise. Expect some diagnostics
only for non-c++26, for c++26 expect different.
* c-c++-common/raw-string-6.c: Use { c || c++11 } effective target,
remove c++ specific dg-options.
* c-c++-common/raw-string-11.c: Likewise.
* c-c++-common/raw-string-13.c: Likewise.
* c-c++-common/raw-string-14.c: Likewise.
* c-c++-common/raw-string-15.c: Use { c || c++11 } effective target,
change c++ specific dg-options to just -Wtrigraphs.
* c-c++-common/raw-string-16.c: Likewise.
* c-c++-common/raw-string-17.c: Use { c || c++11 } effective target,
remove c++ specific dg-options.
* c-c++-common/raw-string-18.c: Use { c || c++11 } effective target,
remove -std=c++11 from c++ specific dg-options.
* c-c++-common/raw-string-19.c: Likewise.
* g++.dg/cpp26/raw-string1.C: New test.
* g++.dg/cpp26/raw-string2.C: New test.
Jeff Law [Thu, 25 Jul 2024 18:32:28 +0000 (12:32 -0600)]
[PR rtl-optimization/116039] Fix life computation for promoted subregs
So this turned out to be a neat little test and while the fuzzer found it on
RISC-V, I wouldn't be surprised if the underlying issue is also the root cause
of the loongarch issue with ext-dce.
The key issue is that if we have something like
(set (dest) (any_extend (subreg (source))))
If the subreg object is marked with SUBREG_PROMOTED and the sign/unsigned state
matches the any_extend opcode, then combine (and I guess anything using
simplify-rtx) may simplify that to
(set (dest) (source))
That implies that bits outside the mode of the subreg are actually live and
valid. This needs to be accounted for during liveness computation.
We have to be careful here though. If we're too conservative about setting
additional bits live, then we'll inhibit the desired optimization in the
coremark examples. To do a good job we need to know the extension opcode.
I'm extremely unhappy with how the use handling works in ext-dce. It mixes
different conceptual steps and has horribly complex control flow. It only
handles a subset of the unary/binary opcodes, etc etc. It's just damn mess.
It's going to need some more noodling around.
In the mean time this is a bit hacky in that it depends on non-obvious behavior
to know it can get the extension opcode, but I don't want to leave the trunk in
a broken state while I figure out the refactoring problem.
Bootstrapped and regression tested on x86 and tested on the crosses. Pushing to the trunk.
PR rtl-optimization/116039
gcc/
* ext-dce.cc (ext_dce_process_uses): Add some comments about concerns
with current code. Mark additional bit groups as live when we have
an extension of a suitably promoted subreg.
gcc/testsuite
* gcc.dg/torture/pr116039.c: New test.
The reason why the pass believes that this is legal is,
that the mode test in th_memidx_classify_address_modify()
requires INTEGRAL_MODE_P (mode), which includes vector modes.
Let's restrict the mode test such, that only MODE_INT is allowed.
cp+coroutines: teach convert_to_void to diagnose discarded co_awaits
co_await expressions are nearly calls to Awaitable::await_resume, and,
as such, should inherit its nodiscard. A discarded co_await expression
should, hence, act as if its call to await_resume was discarded.
This patch teaches convert_to_void how to discard 'through' a
CO_AWAIT_EXPR. When we discard a CO_AWAIT_EXPR, we can also just discard
the await_resume() call conveniently embedded within it. This results
in a [[nodiscard]] diagnostic that the PR noted was missing.
gcc/cp/ChangeLog:
PR c++/110171
* coroutines.cc (co_await_get_resume_call): New function.
Returns the await_resume expression of a given co_await.
* cp-tree.h (co_await_get_resume_call): New function.
* cvt.cc (convert_to_void): Handle CO_AWAIT_EXPRs and call
maybe_warn_nodiscard on their resume exprs.
gcc/testsuite/ChangeLog:
PR c++/110171
* g++.dg/coroutines/pr110171-1.C: New test.
* g++.dg/coroutines/pr110171.C: New test.
cp/coroutines: do not rewrite parameters in unevaluated contexts
It is possible to use parameters of a parent function of a lambda in
unevaluated contexts without capturing them. By not capturing them, we
work around the usual mechanism we use to prevent rewriting captured
parameters. Prevent this by simply skipping rewrites in unevaluated
contexts. Those won't mind the value not being present anyway.
This prevents an ICE during parameter substitution. In the testcase
from the PR, the rewriting machinery finds a param in the body of the
coroutine, which it did not previously encounter while processing the
coroutine declaration, and that does not have a DECL_VALUE_EXPR, and
fails.
Jeff Law [Thu, 25 Jul 2024 14:42:04 +0000 (08:42 -0600)]
[committed] Trivial testcase adjustment
I made pr116037.c dependent on int32 just based on the constants used without
noting the int128 vector type. Naturally on targets that don't support int128
the test fails. Fixed by changing the target selector from int32 to int128.
Richard Biener [Thu, 25 Jul 2024 11:39:49 +0000 (13:39 +0200)]
tree-optimization/116083 - improve behavior when SLP discovery limit is reached
The following avoids some useless work when the SLP discovery limit
is reached, for example allocating a node to cache the failure
and starting discovery on split store groups when analyzing BBs.
It does not address the issue in the PR which is a gratious budget
for discovery when the store group size approaches the number of
overall statements.
PR tree-optimization/116083
* tree-vect-slp.cc (vect_build_slp_tree): Do not allocate
a discovery fail node when we reached the discovery limit.
(vect_build_slp_instance): Terminate early when the
discovery limit is reached.
Patrick Palka [Thu, 25 Jul 2024 13:02:13 +0000 (09:02 -0400)]
libstdc++: fix uses of explicit object parameter [PR116038]
The type of an implicit object parameter is always the current class.
For an explicit object parameter however, its deduced type can be a
derived class of the current class. So when combining multiple
implicit-object overloads into a single explicit-object overload we need
to account for this possibility. For example when accessing a member of
the current class through an explicit object parameter, it may now be a
derived class from which the member is not accessible, as in the below
testcases.
This pitfall is discussed[1] in the deducing this paper. The general
solution is to cast the explicit object parameter to (a reference to)
the current class rather than e.g. using std::forward which preserves
the deduced type.
This patch corrects the existing problematic uses of explicit object
parameters in the library, all of which forward the parameter via
std::forward, to instead cast the parameter to the current class via
our __like_t alias template. Note that unlike the paper's like_t,
ours always returns a reference so we can just write
__like_t<Self, B>(self)
instead of
(_like_t<Self, B>&&)self
as the paper does.
[1]: https://wg21.link/P0847#name-lookup-within-member-functions (and the
section after that)
PR libstdc++/116038
libstdc++-v3/ChangeLog:
* include/std/functional (_Bind_front::operator()): Use __like_t
instead of std::forward when forwarding __self.
(_Bind_back::operator()): Likewise.
* include/std/ranges (_Partial::operator()): Likewise.
(_Pipe::operator()): Likewise.
* testsuite/20_util/function_objects/bind_back/116038.cc: New test.
* testsuite/20_util/function_objects/bind_front/116038.cc: New test.
* testsuite/std/ranges/adaptors/116038.cc: New test.
g:72fbd3b2b2a497dbbe6599239bd61c5624203ed0 added a use of std::array
without explicitly forcing <array> to be included. That didn't cause
problems in my local builds but understandably did for some people.
gcc/
* doc/rtl.texi: Document the need to define INCLUDE_ARRAY before
including rtl-ssa.h.
* rtl-ssa.h: Likewise (in comment).
* config/aarch64/aarch64-cc-fusion.cc: Add INCLUDE_ARRAY.
* config/aarch64/aarch64-early-ra.cc: Likewise.
* config/riscv/riscv-avlprop.cc: Likewise.
* config/riscv/riscv-vsetvl.cc: Likewise.
* fwprop.cc: Likewise.
* late-combine.cc: Likewise.
* pair-fusion.cc: Likewise.
* rtl-ssa/accesses.cc: Likewise.
* rtl-ssa/blocks.cc: Likewise.
* rtl-ssa/changes.cc: Likewise.
* rtl-ssa/functions.cc: Likewise.
* rtl-ssa/insns.cc: Likewise.
* rtl-ssa/movement.cc: Likewise.
Sam James [Tue, 23 Jul 2024 14:06:10 +0000 (15:06 +0100)]
doc: Document -O1 as the preferred level for large machine-generated code
At -O1, the intention is that we compile things in a "reasonable" amount
of time (ditto memory use). In particular, we try to especially avoid
optimizations which scale poorly on pathological cases, as is the case
for large machine-generated code.
Recommend -O1 for large machine-generated code, as has been informally
done on bugs for a while now.
This applies (broadly speaking) for both large machine-generated functions
but also to a lesser extent repetitive small-but-still-not-tiny functions
from a generator program.
Richard Biener [Thu, 25 Jul 2024 10:46:30 +0000 (12:46 +0200)]
tree-optimization/116081 - typedef vs. non-typedef in vectorization
The following fixes the code generation difference when using
a typedef for the scalar type. The issue is using a pointer
equality test for an INTEGER_CST which fails when the types
are different variants.
PR tree-optimization/116081
* tree-vect-loop.cc (get_initial_defs_for_reduction):
Use operand_equal_p for comparing the element with the
neutral op.
Jonathan Wakely [Wed, 26 Jun 2024 13:15:29 +0000 (14:15 +0100)]
libstdc++: Add noexcept to bad_expected_access<void> members (LWG 4031)
libstdc++-v3/ChangeLog:
* include/std/expected (bad_expected_access<void>): Add noexcept
to special member functions, as per LWG 4031.
* testsuite/20_util/expected/bad.cc: Check for nothrow copy and
move members.
Jonathan Wakely [Tue, 23 Jul 2024 11:45:37 +0000 (12:45 +0100)]
libstdc++: Use concepts and conditional explicit in std::optional
For C++20 mode we can improve compile times by using conditional
explicit to reduce the number of constructor overloads. We can also use
requires-clauses instead of SFINAE to implement constraints on the
constructors and assignment operators.
libstdc++-v3/ChangeLog:
* include/std/optional (optional): Use C++20 features to
simplify overload sets for constructors and assignment
operators.
Jonathan Wakely [Tue, 23 Jul 2024 11:45:37 +0000 (12:45 +0100)]
libstdc++: Implement LWG 3836 for std::optional bool conversions
libstdc++-v3/ChangeLog:
* include/std/optional (optional): Constrain constructors to
prevent problematic bool conversions, as per LWG 3836.
* testsuite/20_util/optional/cons/lwg3836.cc: New test.
Jonathan Wakely [Wed, 24 Jul 2024 17:08:03 +0000 (18:08 +0100)]
libstdc++: Implement LWG 3836 for std::expected bool conversions
libstdc++-v3/ChangeLog:
* include/std/expected (expected): Constrain constructors to
prevent problematic bool conversions, as per LWG 3836.
* testsuite/20_util/expected/lwg3836.cc: New test.
Jonathan Wakely [Mon, 22 Jul 2024 19:40:17 +0000 (20:40 +0100)]
libstdc++: Use concepts to simplify std::optional base classes
In C++20 mode we can simplify some of the std::optional base class
hierarchy using concepts. We can overload the destructor and copy
constructor and move constructor with a trivial defaulted version and a
constrained non-trivial version. This allows us to remove some class
template partial specializations that were used to conditionally define
those special members as trivial or non-trivial. This should not change
any semantics, but should be less work for the compiler, due to not
needing to match partial specializations, and completely removing one
level of the inheritance hierarchy.
libstdc++-v3/ChangeLog:
* include/std/optional (_Optional_payload_base::_Storage)
[C++20]: Define constrained non-trivial destructor.
(_Optional_payload_base::_Storage<U, false>) [C++20]: Do not
define partial specialization when primary template has
constrained destructor.
(_Optional_base) [C++20]: Define constrained trivial copy and
move cons and move constructors. Define payload accessors here
instead of inheriting them from _Optional_base_impl.
(_Optional_base_impl, _Optional_base<T, false, true>)
(_Optional_base<T, true, false>, _Optional_base<T, true, true>)
[C++20]: Do not define.
Jonathan Wakely [Tue, 23 Jul 2024 10:46:05 +0000 (11:46 +0100)]
libstdc++: Use _M_get() in std::optional internals
Now that _base::_M_get() doesn't check the precondition, we can use
_M_get() instead of operator*() for the internal uses where we've
already checked the precondition holds.
Add a using-declaration so that we don't need to lookup _M_get in the
dependent base class, and make optional<U> a friend so that the
converting constructors and assignment operators can use the parameter's
_M_get member.
libstdc++-v3/ChangeLog:
* include/std/optional (optional): Add using-declaraction for
_Base::_M_get and declare optional<U> as friend.
(optional(const optional<U>&)): Use
_M_get instead of operator*.
(optional(optional<U>&&)): Likewise.
(operator=(const optional<U>&)): Likewise.
(operator=(optional<U>&&)): Likewise.
(and_then, tansform): Likewise.
Jonathan Wakely [Mon, 22 Jul 2024 19:24:19 +0000 (20:24 +0100)]
libstdc++: Move std::optional assertions out of _M_get()
Currently we implement the precondition for accessing the contained
value of a std::optional in the _M_get() accessor in the base class.
This means that we always check the assertions even in internal
functions that have an explicit check for a contained value being
present, such as value() and value_or(U&&). Although those redundant
assertions should get optimized out in most cases, they might hurt
inliner heuristics and generally give the compiler more work to do.
And they won't be optimized out at all for non-optimized builds.
The current assertions also result in repeated invalid bug reports, such
as PR 91281, PR 101659, PR 102712, and PR 107894.
We can move the assertions from the internal accessors to the public
member functions where the preconditions are specified.
Reviewed-by: Ville Voutilainen <ville.voutilainen@gmail.com>
libstdc++-v3/ChangeLog:
Richard Biener [Thu, 25 Jul 2024 06:58:42 +0000 (08:58 +0200)]
tree-optimization/116079 - store motion and clobbers
When we move a store out of an inner loop and remove a clobber in
the process, analysis of the inner loop can run into the clobber
via the meta-data and crash when accessing its basic-block. The
following avoids this by clearing the VDEF which is how it identifies
already processed stores.
PR tree-optimization/116079
* tree-ssa-loop-im.cc (hoist_memory_references): Clear
VDEF of elided clobbers.
Richard Biener [Thu, 25 Jul 2024 06:34:20 +0000 (08:34 +0200)]
tree-optimization/116081 - typedef vs. non-typedef in vectorization
The following addresses a behavioral difference in vector type
analysis for typedef vs. non-typedef. It doesn't fix the issue
at hand but avoids a spurious difference in the dumps.
Robin Dapp [Wed, 24 Jul 2024 07:08:00 +0000 (09:08 +0200)]
RISC-V: Error early with V and no M extension.
For calculating the value of a poly_int at runtime we use a
multiplication instruction that requires the M extension.
Instead of just asserting and ICEing this patch emits an early
error at option-parsing time.
gcc/ChangeLog:
PR target/116036
* config/riscv/riscv.cc (riscv_override_options_internal): Error
with TARGET_VECTOR && !TARGET_MUL.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/arch-31.c: Add m to arch string and expect it.
* gcc.target/riscv/arch-32.c: Ditto.
* gcc.target/riscv/arch-37.c: Ditto.
* gcc.target/riscv/arch-38.c: Ditto.
* gcc.target/riscv/predef-14.c: Ditto.
* gcc.target/riscv/predef-15.c: Ditto.
* gcc.target/riscv/predef-16.c: Ditto.
* gcc.target/riscv/predef-26.c: Ditto.
* gcc.target/riscv/predef-27.c: Ditto.
* gcc.target/riscv/predef-32.c: Ditto.
* gcc.target/riscv/predef-33.c: Ditto.
* gcc.target/riscv/predef-36.c: Ditto.
* gcc.target/riscv/predef-37.c: Ditto.
* gcc.target/riscv/rvv/autovec/pr111486.c: Add m to arch string.
* gcc.target/riscv/compare-debug-1.c: Ditto.
* gcc.target/riscv/compare-debug-2.c: Ditto.
* gcc.target/riscv/rvv/base/pr116036.c: New test.
Realize in recent benchmark evaluation (coremark-pro zip-test):
vid.v v2
vmv.v.i v5,0
.L9:
vle16.v v3,0(a4)
vrsub.vx v4,v2,a6 ---> LICM failed to hoist it outside the loop.
The root cause is:
(insn 56 47 57 4 (set (subreg:DI (reg:HI 220) 0)
(reg:DI 223)) "rvv.c":11:9 208 {*movdi_64bit} -> Its result used by the following vrsub.vx then supress the hoist of the vrsub.vx
(nil))
* config/riscv/riscv.cc (riscv_legitimize_move): Fix poly_int dest generation.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/rvv/autovec/poly_licm-1.c: New test.
* gcc.target/riscv/rvv/autovec/poly_licm-2.c: New test.
* gcc.target/riscv/rvv/autovec/poly_licm-3.c: New test.
Andrew Pinski [Thu, 25 Jul 2024 01:50:08 +0000 (18:50 -0700)]
libstdc++: Fix testsuite for remote testing (and sim)
The problem here is that v3_additional_files will have a space
at the begining of the string as dg-additional-files will append
`" " $files` to it. Then when split is called on that string,
there will be an empty file and copying a dir will just fail for
remote/sim testing (I didn't look at why it works for native
testing though).
Ran a full libstdc++ testsuite using a sim board for testing.
libstdc++-v3/ChangeLog:
* testsuite/lib/libstdc++.exp (v3_target_compile): Call
string trim on v3_target_compile before calling split.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
rtl-ssa: Fix split_clobber_group tree insertion [PR116044]
PR116044 is a regression in the testsuite on AMD GCN caused (again)
by the split_clobber_group code. The first patch in this area
(g:71b31690a7c52413496e91bcc5ee4c68af2f366f) fixed a bug caused
by carrying the old group over as one of the split ones. That
patch instead:
- created two new groups
- inserted them in the splay tree as neighbours of the old group
- removed the old group, and
- invalidated the old group (to force lazy recomputation when
a clobber's parent group is queried)
However, this left add_def trying to insert the new definition
relative to a stale splay tree root. The second patch
(g:34f33ea801563e2eabb348e8d3e9344a91abfd48) attempted to fix
that by inserting it relative to the new root. But that's not
always correct either. We specifically want to insert it after
the first of the two new groups, whether that group is the root
or not.
This patch does that, and tries to refactor the code to make
it a bit less brittle.
gcc/
PR rtl-optimization/116044
* rtl-ssa/functions.h (function_info::split_clobber_group): Return
an array of two clobber_groups.
* rtl-ssa/accesses.cc (function_info::split_clobber_group): Return
the new clobber groups. Don't modify the splay tree here.
(function_info::add_def): Update call accordingly. Generalize
the splay tree insertion code so that the new definition can be
inserted as a child of any existing node, not just the root.
Fix the insertion used after calling split_clobber_group.
Jennifer Schmitz [Tue, 23 Jul 2024 10:54:50 +0000 (03:54 -0700)]
SVE Intrinsics: Change return type of redirect_call to gcall.
As suggested in the review of
https://gcc.gnu.org/pipermail/gcc-patches/2024-July/657474.html,
this patch changes the return type of gimple_folder::redirect_call from
gimple * to gcall *. The motivation for this is that so far, most callers of
the function had been casting the result of the function to gcall. These
call sites were updated.
The patch was bootstrapped and regtested on aarch64-linux-gnu, no regression.
OK for mainline?
Signed-off-by: Jennifer Schmitz <jschmitz@nvidia.com>
gcc/
Richard Biener [Tue, 23 Jul 2024 12:05:47 +0000 (14:05 +0200)]
Maintain complex constraint vector order during PTA solving
There's a FIXME comment in the PTA constraint solver that the vector
of complex constraints can get unsorted which can lead to duplicate
entries piling up during node unification. The following fixes this
with the assumption that delayed updates to constraints are uncommon
(otherwise re-sorting the whole vector would be more efficient).
* tree-ssa-structalias.cc (constraint_equal): Take const
reference to constraints.
(constraint_vec_find): Similar.
(solve_graph): Keep constraint vector sorted and verify
sorting with checking.
David Malcolm [Wed, 24 Jul 2024 22:07:57 +0000 (18:07 -0400)]
diagnostics: SARIF output: tweak output for UNKNOWN_LOCATION
gcc/ChangeLog:
* diagnostic-format-sarif.cc (sarif_builder::make_locations_arr):
Don't add entirely empty location objects, such as for
UNKNOWN_LOCATION.
(test_sarif_diagnostic_context::test_sarif_diagnostic_context):
Add param "main_input_filename".
(selftest::test_simple_log): Provide above param. Verify that
"locations" is empty.
(selftest::test_simple_log_2): New.
(selftest::diagnostic_format_sarif_cc_tests): Call it.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
David Malcolm [Wed, 24 Jul 2024 22:07:56 +0000 (18:07 -0400)]
diagnostics: add selftests for SARIF output
The existing DejaGnu-based tests for our SARIF output used regexes
to verify the JSON at the string level, which lets us test for
the presence of properties, but doesn't check the overall structure.
This patch uses the selftest framework to verify the structure of
the tree of JSON values for a log containing one diagnostic.
No functional change intended.
gcc/ChangeLog:
* diagnostic-format-sarif.cc (sarif_builder::flush_to_object):
New, using code moved from...
(sarif_builder::end_group): ...here.
(class selftest::test_sarif_diagnostic_context): New.
(selftest::test_simple_log): New.
(selftest::diagnostic_format_sarif_cc_tests): Call it.
* json.h (json::object::is_empty): New.
* selftest-diagnostic.cc (test_diagnostic_context::report): New.
* selftest-diagnostic.h (test_diagnostic_context::report): New
decl.
* selftest-json.cc (selftest::assert_json_string_eq): New.
(selftest::expect_json_object_with_string_property): New.
(selftest::assert_json_string_property_eq): New.
* selftest-json.h (selftest::assert_json_string_eq): New decl.
(ASSERT_JSON_STRING_EQ): New macro.
(selftest::expect_json_object_with_string_property): New decl.
(EXPECT_JSON_OBJECT_WITH_STRING_PROPERTY): New macro.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
This patch extends our SARIF output so that if a diagnostic has any
labelled source ranges, the "location" object gains an "annotations"
property capturing them (ยง3.28.6).
For example, given this textual output:
../../src/gcc/testsuite/gcc.dg/bad-binary-ops.c: In function โtest_2โ:
../../src/gcc/testsuite/gcc.dg/bad-binary-ops.c:31:11: error: invalid operands to binary + (have โstruct sโ and โstruct tโ)
30 | return (some_function ()
| ~~~~~~~~~~~~~~~~
| |
| struct s
31 | + some_other_function ());
| ^ ~~~~~~~~~~~~~~~~~~~~~~
| |
| struct t
the SARIF output gains this within the result's location[0]:
gcc/ChangeLog:
* diagnostic-format-sarif.cc
(sarif_builder::make_location_object): Add "annotations" property if
there are any labelled ranges (ยง3.28.6).
(selftest::test_make_location_object): Verify annotations are added
to location_obj.
* json.h (json::array::size): New.
(json::array::operator[]): New.
* selftest-json.cc
(selftest::expect_json_object_with_array_property): New.
* selftest-json.h
(selftest::expect_json_object_with_array_property): New decl.
(EXPECT_JSON_OBJECT_WITH_ARRAY_PROPERTY): New macro.
gcc/testsuite/ChangeLog:
* c-c++-common/diagnostic-format-sarif-file-Wbidi-chars.c: Verify
that we have an "annotations" property for the labelled
ranges (ยง3.28.6).
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
gcc/ChangeLog:
* diagnostic-format-sarif.cc
(make_date_time_string_for_current_time): New.
(sarif_invocation::sarif_invocation): Set "startTimeUtc"
property (ยง3.20.7).
(sarif_invocation::prepare_to_flush): Set "endTimeUtc"
property (ยง3.20.8).
gcc/testsuite/ChangeLog:
* c-c++-common/diagnostic-format-sarif-file-1.c: Verify that we have
"startTimeUtc" and "endTimeUtc" properties of the correct form.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
gcc/ChangeLog:
* diagnostic-format-sarif.cc (sarif_invocation::sarif_invocation):
Add "original_argv" param and use it to populate "arguments"
property (ยง3.20.2).
(sarif_builder::sarif_builder): Pass argv to m_invocation_obj's
ctor.
* diagnostic.cc (diagnostic_context::initialize): Initialize
m_original_argv.
(diagnostic_context::finish): Clean up m_original_argv.
(diagnostic_context::set_original_argv): New.
* diagnostic.h: Include "unique-argv.h".
(diagnostic_context::set_original_argv): New decl.
(diagnostic_context::get_original_argv): New decl.
(diagnostic_context::m_original_argv): New field.
* toplev.cc: Include "unique-argv.h".
(general_init): Add "original_argv" param and move it to global_dc.
(toplev::main): Stash a copy of the original argv before expansion,
and pass it to general_init for use by SARIF output.
* unique-argv.h: New file.
gcc/jit/ChangeLog:
* jit-playback.cc (jit::playback_context::compile) Add a trailing
null to argvec.
gcc/testsuite/ChangeLog:
* c-c++-common/diagnostic-format-sarif-file-1.c: Verify that we
have an "arguments" property (ยง3.20.2).
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
gcc/ChangeLog:
* diagnostic-format-sarif.cc
(sarif_builder::make_artifact_location_object): Make public.
(sarif_invocation::sarif_invocation): Add param "builder".
Use it to potentially populate the "workingDirectory" property
with the result of pwd (ยง3.20.19).
(sarif_builder::sarif_builder): Pass *this to m_invocation_obj's
ctor.
gcc/testsuite/ChangeLog:
* c-c++-common/diagnostic-format-sarif-file-1.c: Verify that we have
a "workingDirectory" property.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
David Malcolm [Wed, 24 Jul 2024 22:07:54 +0000 (18:07 -0400)]
diagnostics: SARIF output: potentially add escaped renderings of source (ยง3.3.4)
This patch adds support to our SARIF output for cases where
rich_loc.escape_on_output_p () is true, such as for -Wbidi-chars.
In such cases, the pertinent SARIF "location" object gains a property
bag with property "gcc/escapeNonAscii": true, and the "artifactContent"
within the location's physical location's snippet" gains a "rendered"
property (ยง3.3.4) that escapes non-ASCII text in the snippet, such as:
"rendered": {"text":
where "text" has a string value such as (for a "trojan source" attack):
"9 | /*<U+202E> } <U+2066>if (isAdmin)<U+2069> <U+2066> begin admins only */\n"
" | ~~~~~~~~ ~~~~~~~~ ^\n"
" | | | |\n"
" | | | end of bidirectional context\n"
" | U+202E (RIGHT-TO-LEFT OVERRIDE) U+2066 (LEFT-TO-RIGHT ISOLATE)\n"
where the escaping is affected by -fdiagnostics-escape-format=; with
-fdiagnostics-escape-format=bytes, the rendered text of the above is:
"9 | /*<e2><80><ae> } <e2><81><a6>if (isAdmin)<e2><81><a9> <e2><81><a6> begin admins only */\n"
" | ~~~~~~~~~~~~ ~~~~~~~~~~~~ ^\n"
" | | | |\n"
" | U+202E (RIGHT-TO-LEFT OVERRIDE) U+2066 (LEFT-TO-RIGHT ISOLATE) end of bidirectional context\n"
The patch also refactors/adds enough selftest machinery to be able to
test the snippet generation from within the selftest framework, rather
than just within DejaGnu (where the regex-based testing isn't
sophisticated enough to verify such properties as the above).
gcc/ChangeLog:
* Makefile.in (OBJS-libcommon): Add selftest-json.o.
* diagnostic-format-sarif.cc: Include "selftest.h",
"selftest-diagnostic.h", "selftest-diagnostic-show-locus.h",
"selftest-json.h", and "text-range-label.h".
(class content_renderer): New.
(sarif_builder::m_rules_arr): Convert to std::unique_ptr.
(sarif_builder::make_location_object): Add class
escape_nonascii_renderer. If rich_loc.escape_on_output_p (),
pass a nonnull escape_nonascii_renderer to
maybe_make_physical_location_object as its snippet_renderer, and
add a property bag property "gcc/escapeNonAscii" to the SARIF
location object. For other overloads of make_location_object,
pass nullptr for the snippet_renderer.
(sarif_builder::maybe_make_region_object_for_context): Add
"snippet_renderer" param and pass it to
maybe_make_artifact_content_object.
(sarif_builder::make_tool_object): Drop "const".
(sarif_builder::make_driver_tool_component_object): Likewise.
Use typesafe unique_ptr variant of object::set for setting "rules"
property on driver_obj.
(sarif_builder::maybe_make_artifact_content_object): Add param "r"
and use it to potentially set the "rendered" property (ยง3.3.4).
(selftest::test_make_location_object): New.
(selftest::diagnostic_format_sarif_cc_tests): New.
* diagnostic-show-locus.cc: Include "text-range-label.h" and
"selftest-diagnostic-show-locus.h".
(selftests::diagnostic_show_locus_fixture::diagnostic_show_locus_fixture):
New.
(selftests::test_layout_x_offset_display_utf8): Use
diagnostic_show_locus_fixture to simplify and consolidate setup
code.
(selftests::test_diagnostic_show_locus_one_liner): Likewise.
(selftests::test_one_liner_colorized_utf8): Likewise.
(selftests::test_diagnostic_show_locus_one_liner_utf8): Likewise.
* gcc-rich-location.h (class text_range_label): Move to new file
text-range-label.h.
* selftest-diagnostic-show-locus.h: New file, based on material in
diagnostic-show-locus.cc.
* selftest-json.cc: New file.
* selftest-json.h: New file.
* selftest-run-tests.cc (selftest::run_tests): Call
selftest::diagnostic_format_sarif_cc_tests.
* selftest.h (selftest::diagnostic_format_sarif_cc_tests): New decl.
gcc/testsuite/ChangeLog:
* c-c++-common/diagnostic-format-sarif-file-Wbidi-chars.c: Verify
that we have a property bag with property "gcc/escapeNonAscii": true.
Verify that we have a "rendered" property for a snippet.
* gcc.dg/plugin/diagnostic_plugin_test_show_locus.c: Include
"text-range-label.h".
gcc/ChangeLog:
* text-range-label.h: New file, taking class text_range_label from
gcc-rich-location.h.
libcpp/ChangeLog:
* include/rich-location.h
(semi_embedded_vec::semi_embedded_vec): Add copy ctor.
(rich_location::rich_location): Remove "= delete" from decl of
copy ctor. Add deleted decl of move ctor.
(rich_location::operator=): Remove "= delete" from decl of
copy assignment. Add deleted decl of move assignment.
(fixit_hint::fixit_hint): Add copy ctor decl. Add deleted decl of
move.
(fixit_hint::operator=): Add copy assignment decl. Add deleted
decl of move assignment.
* line-map.cc (rich_location::rich_location): New copy ctor.
(fixit_hint::fixit_hint): New copy ctor.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
David Malcolm [Wed, 24 Jul 2024 22:07:54 +0000 (18:07 -0400)]
diagnostics: JSON output: use std::unique_ptr throughout
No functional change intended.
gcc/ChangeLog:
* diagnostic-format-json.cc: Include "make-unique.h".
(json_output_format::m_toplevel_array): Convert to
std::unique_ptr.
(json_output_format::json_output_format): Update accordingly.
(json_output_format::~json_output_format): Remove manual
"delete" of field.
(json_from_expanded_location): Convert return type to
std::unique_ptr.
(json_from_location_range): Likewise. Use nullptr rather than
NULL.
(json_from_fixit_hint): Convert return type to std::unique_ptr.
(json_from_metadata): Likewise.
(make_json_for_path): Likewise.
(json_output_format::on_end_diagnostic): Use std::unique_ptr
throughout.
(json_file_output_format::~json_file_output_format): Use nullptr.
(selftest::test_unknown_location): Update to use std::unique_ptr.
(selftest::test_bad_endpoints): Likewise. Replace NULL with
nullptr.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
David Malcolm [Wed, 24 Jul 2024 22:07:53 +0000 (18:07 -0400)]
diagnostics: SARIF output: use std::unique_ptr throughout
No functional change intended.
gcc/analyzer/ChangeLog:
* checker-event.cc (maybe_add_sarif_properties): Update setting
of "original_fndecl" to use typesafe unique_ptr variant of
json::object::set.
gcc/ChangeLog:
* diagnostic-format-sarif.cc: Include "make-unique.h". Convert
raw pointers to std::unique_ptr throughout to indicate ownership,
adding comments in the few places where pointers are borrowed.
Use typesafe unique_ptr variants of json::object::set and
json::array::append throughout to make types of properties more
explicit, whilst using "auto" to reduce typing.
Use "nullptr" rather than "NULL" throughout.
* diagnostic-format-sarif.h (make_sarif_logical_location_object):
Use std::unique_ptr for return type.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
David Malcolm [Wed, 24 Jul 2024 22:07:53 +0000 (18:07 -0400)]
json: support std::unique_ptr in array::append and object::set
This patch uses templates to add overloads of json::array::append and
json::object::set taking std::unique_ptr<T> where T is a subclass of
json::value.
Doing so makes it much easier to track memory ownership and enforce
schema validity when constructing non-trivial JSON; using the wrong
kind of JSON value leads to compile-time errors like the following:
gcc/ChangeLog:
* diagnostic-format-json.cc: Define INCLUDE_MEMORY.
* diagnostic-format-sarif.cc: Likewise.
* dumpfile.cc: Likewise.
* gcov.cc: Likewise.
* json.cc: Likewise. Include "make-unique.h".
(selftest::test_formatting): Exercise overloads of
array::append and object::set that use unique_ptr.
* json.h: Require INCLUDE_MEMORY to have been defined.
(json::object::set): Add a template to add a family of overloads
taking a std::unique_ptr<JsonType>
(json::array::append): Likewise.
* optinfo-emit-json.cc: Define INCLUDE_MEMORY.
* optinfo.cc: Likewise.
* timevar.cc: Likewise.
* toplev.cc: Likewise.
* tree-diagnostic-client-data-hooks.cc: Likewise.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
David Malcolm [Wed, 24 Jul 2024 22:07:52 +0000 (18:07 -0400)]
diagnostics: SARIF output: add sarif_object subclasses throughout
No functional change intended.
gcc/ChangeLog:
* diagnostic-format-sarif.cc: Introduce subclasses of sarif_object
for all aspects of the spec that we're using. Replace almost all
usage of json::object with uses of these subclasses, the only
remaining use of json::object being for originalUriBaseIds, as per
SARIF 2.1.0 ยง3.14.14. This stronger typing makes it considerably
easier to maintain validity against the schema.
* diagnostic-format-sarif.h (class sarif_logical_location): New.
(make_sarif_logical_location_object): Convert return type from
json::object * to sarif_logical_location *.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
David Malcolm [Wed, 24 Jul 2024 22:07:51 +0000 (18:07 -0400)]
json: add array::append_string
No functional change intended.
gcc/analyzer/ChangeLog:
* supergraph.cc (supernode::to_json): Avoid naked "new" by using
json::array::append_string.
(supernode::to_json): Likewise.
gcc/ChangeLog:
* diagnostic-format-sarif.cc (sarif_artifact::populate_roles):
Avoid naked "new" by using json::array::append_string.
(sarif_builder::maybe_make_kinds_array): Likewise.
* json.cc (json::array::append_string): New.
(selftest::test_writing_arrays): Use it.
* json.h (json::array::append_string): New decl.
* optinfo-emit-json.cc (optrecord_json_writer::pass_to_json):
Avoid naked "new" by using json::array::append_string.
(optrecord_json_writer::optinfo_to_json): Likewise.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
Jason Merrill [Wed, 24 Jul 2024 20:20:33 +0000 (16:20 -0400)]
c++: parse error with -std=c++14 -fconcepts [PR116071]
cp_parser_simple_type_specifier tries a variety of different things that
might qualify as a user-defined type: an actual type-name, a constrained
auto, a CTAD placeholder. In a context where a type-specifier is optional,
this is all tentative. With -std=c++14 -fconcepts, we try type-name and
constrained auto in sub-tentative parses, and when we run out of things to
try we haven't found anything but also haven't failed the outer tentative
parse, so parse_definitely succeeds, discarding the nested-name-specifier.
Fixed by failing if we didn't find anything.
I said in r14-3203 that we should disable this combination of flags if
further problems arise, but this seems like a more general problem that only
happened to occur with just this combination of flags. So it lives on.
PR c++/116071
gcc/cp/ChangeLog:
* parser.cc (cp_parser_simple_type_specifier): Call
cp_parser_simulate_error if nothing worked.
Jakub Jelinek [Wed, 24 Jul 2024 17:46:58 +0000 (19:46 +0200)]
c++: Mostly concepts related formatting fixes
When playing with P2963R3, while reading and/or modifying code I've fixed
various comment or code formatting issues (and in 3 spots also comment
wording), but including that in the WIP P2963R3 patch made that patch
totally unreadable because these changes were 4 times the size of the
actual code changes.
So, here it is separated to a pure formatting + comment wording patch.
Jeff Law [Wed, 24 Jul 2024 17:16:26 +0000 (11:16 -0600)]
[rtl-optimization/116037] Explicitly track if a destination was skipped in ext-dce
So this has been in the hopper since the first bugs were reported against
ext-dce. It'd been holding off committing as I was finding other issues in
terms of correctness of live computations. There's still problems in that
space, but I think it's time to push this chunk forward. I'm marking it as
116037, but it may impact other bugs.
This patch starts explicitly tracking if set processing skipped a destination,
which can happen for wide modes (TI+), vectors, certain subregs, etc. This is
computed during ext_dce_set_processing.
During use processing we use that flag to determine reliably if we need to make
the inputs fully live and to avoid even trying to eliminate an extension if we
skipped output processing.
While testing this I found that a recent change to fix cases where we had two
subreg input operands mucked up the code to make things like a shift/rotate
count fully live. So that goof has been fixed.
Bootstrapped and regression tested on x86. Most, but not all, of these changes
have also been tested on the crosses. Pushing to the trunk.
I'm not including it in this patch but I'm poking at converting this code to
use note_uses/note_stores to make it more maintainable. The SUBREG and
STRICT_LOW_PART handling of note_stores is problematical, but I think it's
solvable. I haven't tried a conversion to note_uses yet.
PR rtl-optimization/116037
gcc/
* ext-dce.cc (ext_dce_process_sets): Note if we ever skip a dest
and return that info explicitly.
(ext_dce_process_uses): If a set was skipped, then consider all bits
in every input as live. Do not try to optimize away an extension if
we skipped processing a destination in the same insn. Restore code
to make shift/rotate count fully live.
(ext_dce_process_bb): Handle API changes for ext_dce_process_sets.
gcc/testsuite/
* gcc.dg/torture/pr116037.c: New test
Jakub Jelinek [Wed, 24 Jul 2024 16:00:05 +0000 (18:00 +0200)]
testsuite: Fix up pr116034.c test for big/pdp endian [PR116061]
Didn't notice the memmove is into an int variable, so the test
was still failing on big endian.
2024-07-24 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/116034
PR testsuite/116061
* gcc.dg/pr116034.c (g): Change type from int to unsigned short.
(foo): Guard memmove call on __SIZEOF_SHORT__ == 2.
Jonathan Wakely [Wed, 24 Jul 2024 10:32:22 +0000 (11:32 +0100)]
libstdc++: Fix <ostream> and <istream> for -std=gnu++14 -fconcepts [PR116070]
This questionable combination of flags causes a number of errors. The
ones in the rvalue stream overloads need to be fixed in the gcc-14
branch so I'm committing it separately to simplify backporting.
libstdc++-v3/ChangeLog:
PR libstdc++/116070
* include/std/istream: Check feature test macro before using
is_class_v and is_same_v.
* include/std/ostream: Likewise.
Jonathan Wakely [Wed, 24 Jul 2024 10:32:22 +0000 (11:32 +0100)]
libstdc++: Fix std::vector<bool> for -std=gnu++14 -fconcepts [PR116070]
This questionable combination of flags causes a number of errors. This
one in std::vector<bool> needs to be fixed in the gcc-13 branch so I'm
committing it separately to simplify backporting.
libstdc++-v3/ChangeLog:
PR libstdc++/116070
* include/bits/stl_bvector.h: Check feature test macro before
using is_default_constructible_v.
The comment for the first time it is included in the file is also
incorrect (my error from that 2nd one) since it is really being included
for __memcmp, not __memcpy
This patch removes the duplicate header include.
libstdc++-v3/ChangeLog:
* include/bits/ranges_algobase.h: Remove duplicate include of
<bits/stl_algobase.h>.
Signed-off-by: Michael Levine <mlevine55@bloomberg.net>
Andrew Carlotti [Fri, 10 May 2024 12:34:34 +0000 (13:34 +0100)]
aarch64: Extend aarch64_feature_flags to 128 bits
Replace the existing uint64_t typedef with a bbitmap<2> typedef. Most
of the preparatory work was carried out in previous commits, so this
patch itself is fairly small.
gcc/ChangeLog:
* common/config/aarch64/aarch64-common.cc
(aarch64_set_asm_isa_flags): Store a second uint64_t value.
* config/aarch64/aarch64-opts.h
(aarch64_feature_flags): Switch typedef to bbitmap<2>.
* config/aarch64/aarch64.cc
(aarch64_set_current_function): Extract isa mode from val[0].
* config/aarch64/aarch64.h
(aarch64_get_asm_isa_flags): Load a second uint64_t value.
(aarch64_get_isa_flags): Ditto.
(aarch64_asm_isa_flags): Ditto.
(aarch64_isa_flags): Ditto.
(HANDLE): Use bbitmap<2>::from_index to initialise flags.
(AARCH64_FL_ISA_MODES): Do arithmetic on integer type.
(AARCH64_ISA_MODE): Extract value from bbitmap<2> array.
* config/aarch64/aarch64.opt
(aarch64_asm_isa_flags_1): New variable.
(aarch64_isa_flags_1): Ditto.
Andrew Carlotti [Fri, 21 Jun 2024 17:59:25 +0000 (18:59 +0100)]
Add new bbitmap<N> class
This class provides a constant-size bitmap that can be used as almost a
drop-in replacement for bitmaps stored in integer types. The
implementation is entirely within the header file and uses recursive
templated operations to support effective optimisation and usage in
constexpr expressions.
This initial implementation hardcodes the choice of uint64_t elements
for storage and initialisation, but this could instead be specified via
a second template parameter.
Andrew Carlotti [Fri, 10 May 2024 10:56:57 +0000 (11:56 +0100)]
aarch64: Decouple feature flag option storage type
The awk scripts that process the .opt files are relatively fragile and
only handle a limited set of data types correctly. The unrecognised
aarch64_feature_flags type is handled as a uint64_t, which happens to be
correct for now. However, that assumption will change when we extend
the mask to 128 bits.
This patch changes the option members to use uint64_t types, and adds a
"_0" suffix to the names (both for future extensibility, and to allow
the original name to be used for the full aarch64_feature_flags mask
within generator files).
gcc/ChangeLog:
* common/config/aarch64/aarch64-common.cc
(aarch64_set_asm_isa_flags): Reorder, and add suffix to names.
* config/aarch64/aarch64.h
(aarch64_get_asm_isa_flags): Add "_0" suffix.
(aarch64_get_isa_flags): Ditto.
(aarch64_asm_isa_flags): Redefine using renamed uint64_t value.
(aarch64_isa_flags): Ditto.
* config/aarch64/aarch64.opt:
(aarch64_asm_isa_flags): Rename to...
(aarch64_asm_isa_flags_0): ...this, and change to uint64_t.
(aarch64_isa_flags): Rename to...
(aarch64_isa_flags_0): ...this, and change to uint64_t.
Andrew Carlotti [Fri, 10 May 2024 10:46:17 +0000 (11:46 +0100)]
aarch64: Define aarch64_get_{asm_|}isa_flags
Building an aarch64_feature_flags value from data within a gcc_options
or cl_target_option struct will get more complicated in a later commit.
Use a macro to avoid doing this manually in more than one location.
gcc/ChangeLog:
* common/config/aarch64/aarch64-common.cc
(aarch64_handle_option): Use new macro.
* config/aarch64/aarch64.cc
(aarch64_override_options_internal): Ditto.
(aarch64_option_print): Ditto.
(aarch64_set_current_function): Ditto.
(aarch64_can_inline_p): Ditto.
(aarch64_declare_function_name): Ditto.
(aarch64_start_file): Ditto.
* config/aarch64/aarch64.h (aarch64_get_asm_isa_flags): New
(aarch64_get_isa_flags): New.
(aarch64_asm_isa_flags): Use new macro.
(aarch64_isa_flags): Ditto.
Andrew Carlotti [Fri, 3 May 2024 15:51:05 +0000 (16:51 +0100)]
aarch64: Introduce aarch64_isa_mode type
Currently there are many places where an aarch64_feature_flags variable
is used, but only the bottom three isa mode bits are set and read.
Using a separate data type for these value makes it more clear that
they're not expected or required to have any of their upper feature bits
set. It will also make things simpler and more efficient when we extend
aarch64_feature_flags to 128 bits.
This patch uses explicit casts whenever converting from an
aarch64_feature_flags value to an aarch64_isa_mode value. This isn't
strictly necessary, but serves to highlight the locations where an
explicit conversion will become necessary later.
gcc/ChangeLog:
* config/aarch64/aarch64-opts.h: Add aarch64_isa_mode typedef.
* config/aarch64/aarch64-protos.h
(aarch64_gen_callee_cookie): Use aarch64_isa_mode parameter.
(aarch64_sme_vq_immediate): Ditto.
* config/aarch64/aarch64.cc
(aarch64_fntype_pstate_sm): Use aarch64_isa_mode values.
(aarch64_fntype_pstate_za): Ditto.
(aarch64_fndecl_pstate_sm): Ditto.
(aarch64_fndecl_pstate_za): Ditto.
(aarch64_fndecl_isa_mode): Ditto.
(aarch64_cfun_incoming_pstate_sm): Ditto.
(aarch64_cfun_enables_pstate_sm): Ditto.
(aarch64_call_switches_pstate_sm): Ditto.
(aarch64_gen_callee_cookie): Ditto.
(aarch64_callee_isa_mode): Ditto.
(aarch64_insn_callee_abi): Ditto.
(aarch64_sme_vq_immediate): Ditto.
(aarch64_add_offset_temporaries): Ditto.
(aarch64_add_offset): Ditto.
(aarch64_add_sp): Ditto.
(aarch64_sub_sp): Ditto.
(aarch64_guard_switch_pstate_sm): Ditto.
(aarch64_switch_pstate_sm): Ditto.
(aarch64_init_cumulative_args): Ditto.
(aarch64_allocate_and_probe_stack_space): Ditto.
(aarch64_expand_prologue): Ditto.
(aarch64_expand_epilogue): Ditto.
(aarch64_start_call_args): Ditto.
(aarch64_expand_call): Ditto.
(aarch64_end_call_args): Ditto.
(aarch64_set_current_function): Ditto, with added conversions.
(aarch64_handle_attr_arch): Avoid macro with changed type.
(aarch64_handle_attr_cpu): Ditto.
(aarch64_handle_attr_isa_flags): Ditto.
(aarch64_switch_pstate_sm_for_landing_pad):
Use arch64_isa_mode values.
(aarch64_switch_pstate_sm_for_jump): Ditto.
(pass_switch_pstate_sm::gate): Ditto.
* config/aarch64/aarch64.h
(AARCH64_ISA_MODE_{SM_ON|SM_OFF|ZA_ON}): New macros.
(AARCH64_FL_SM_STATE): Mark as possibly unused.
(AARCH64_ISA_MODE_SM_STATE): New aarch64_isa_mode mask.
(AARCH64_DEFAULT_ISA_MODE): New aarch64_isa_mode value.
(AARCH64_FL_DEFAULT_ISA_MODE): Define using above value.
(AARCH64_ISA_MODE): Change type to aarch64_isa_mode.
(arm_pcs): Use aarch64_isa_mode value.
Andrew Pinski [Tue, 23 Jul 2024 04:23:38 +0000 (21:23 -0700)]
optabs/rs6000: Rename iorc and andc to iorn and andn
When I was trying to add an scalar version of iorc and andc, the optab that
got matched was for and/ior with the mode of csi and cdi instead of iorc and
andc optabs for si and di modes. Since csi/cdi are the complex integer modes,
we need to rename the optabs to be without c there. This changes c to n which
is a neutral and known not to be first letter of a mode.
Bootstrapped and tested on x86_64 and powerpc64le.
gcc/ChangeLog:
* config/rs6000/rs6000-builtins.def: s/iorc/iorn/. s/andc/andn/
for the code.
* config/rs6000/rs6000-string.cc (expand_cmp_vec_sequence): Update
to iorn.
* config/rs6000/rs6000.md (andc<mode>3): Rename to ...
(andn<mode>3): This.
(iorc<mode>3): Rename to ...
(iorn<mode>3): This.
* doc/md.texi: Update documentation for the rename.
* internal-fn.def (BIT_ANDC): Rename to ...
(BIT_ANDN): This.
(BIT_IORC): Rename to ...
(BIT_IORN): This.
* optabs.def (andc_optab): Rename to ...
(andn_optab): This.
(iorc_optab): Rename to ...
(iorn_optab): This.
* gimple-isel.cc (gimple_expand_vec_cond_expr): Update for the
renamed internal functions, ANDC/IORC to ANDN/IORN.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
Richard Biener [Wed, 24 Jul 2024 11:16:35 +0000 (13:16 +0200)]
tree-optimization/116057 - wrong code with CCP and vector CTORs
The following fixes an issue with CCPs likely_value when faced with
a vector CTOR containing undef SSA names and constants. This should
be classified as CONSTANT and not UNDEFINED.
PR tree-optimization/116057
* tree-ssa-ccp.cc (likely_value): Also walk CTORs in stmt
operands to look for constants.
git://gcc.gnu.org / gcc.git / log