* config/locale/newlib/ctype_members.cc: New file.
* acinclude.m4 (GLIBCXX_ENABLE_CLOCALE): Add a new C locale
kind: newlib. Configure to use the newlib specific
ctype_members.cc when with_newlib is enabled.
* configure: Regenerate.
* directives.c (struct if_stack): Use source_location as type
here.
* include/cpplib.h (struct cpp_callbacks)<include, define, undef,
indent, def_pragma, used_define, used_undef>: Properly use
source_location as parameter type, rather than unsigned int.
Jakub Jelinek [Fri, 15 Jul 2011 19:46:11 +0000 (21:46 +0200)]
wait.h (do_spin): New inline...
* config/linux/wait.h (do_spin): New inline, largely copied
from do_wait, just don't do futex_wait here, instead return true if
it should be done.
(do_wait): Implement using do_spin.
* config/linux/mutex.h (gomp_mutex_lock_slow): Add an int argument
to prototype.
(gomp_mutex_lock): Use __sync_val_compare_and_swap instead of
__sync_bool_compare_and_swap, pass the oldval to
gomp_mutex_lock_slow.
* config/linux/mutex.c (gomp_mutex_lock_slow): Add oldval argument.
If all mutex contenders are just spinning and not sleeping, don't
change state to 2 unnecessarily. Optimize the loop when state has
already become 2 to use just one atomic operation per loop instead
of two.
* config/linux/ia64/mutex.h (gomp_mutex_lock_slow): Add an int argument
to prototype.
(gomp_mutex_lock): Use __sync_val_compare_and_swap instead of
__sync_bool_compare_and_swap, pass the oldval to
gomp_mutex_lock_slow.
Eric Botcazou [Fri, 15 Jul 2011 17:09:56 +0000 (17:09 +0000)]
re PR debug/48220 (DW_OP_GNU_entry_value/DW_TAG_GNU_call_site_parameter vs register window)
PR target/48220
* doc/md.texi (Standard Names): Document window_save.
* cfgexpand.c (expand_debug_parm_decl): New function extracted from
expand_debug_expr and expand_debug_source_expr. If the target has
a window_save instruction, adjust the ENTRY_VALUE_EXP.
(expand_debug_expr) <SSA_NAME>: Call expand_debug_parm_decl if the
SSA_NAME_VAR is a parameter.
(expand_debug_source_expr) <PARM_DECL>: Call expand_debug_parm_decl.
* var-tracking.c (parm_reg_t): New type and associated vector type.
(windowed_parm_regs): New variable.
(adjust_insn): If the target has a window_save instruction and this
is the instruction, make its effect on parameter registers explicit.
(next_non_note_insn_var_location): New function.
(emit_notes_in_bb): Use it instead of NEXT_INSN throughout.
(vt_add_function_parameter): If the target has a window_save insn,
adjust the incoming RTL and record that in windowed_parm_regs.
(vt_finalize): Free windowed_parm_regs.
revert: re PR rtl-optimization/11320 (Scheduler bug)
Revert
2003-07-10 Eric Botcazou <ebotcazou@libertysurf.fr>
PR rtl-optimization/11320
* sched-int.h (struct deps) [reg_conditional_sets]: New field.
(struct sched_info) [compute_jump_reg_dependencies]: New prototype.
* sched-deps.c (sched_analyze_insn) [JUMP_INSN]: Update call to
current_sched_info->compute_jump_reg_dependencies. Record which
registers are used and which registers are set by the jump.
Clear deps->reg_conditional_sets after a barrier.
Set deps->reg_conditional_sets if the insn is a COND_EXEC.
Clear deps->reg_conditional_sets if the insn is not a COND_EXEC.
(init_deps): Initialize reg_conditional_sets.
(free_deps): Clear reg_conditional_sets.
* sched-ebb.c (compute_jump_reg_dependencies): New prototype.
Mark registers live on entry of the fallthrough block and conditionally
set as set by the jump. Mark registers live on entry of non-fallthrough
blocks as used by the jump.
* sched-rgn.c (compute_jump_reg_dependencies): New prototype.
Mark new parameters as unused.
* gcc.target/tic6x/weak-call.c: New test.
* gcc.target/tic6x/fpcmp.c: New test.
* gcc.target/tic6x/fpdiv.c: New test.
* gcc.target/tic6x/rotdi16-scan.c: New test.
* gcc.target/tic6x/ffssi.c: New test.
* gcc.target/tic6x/fpdiv-lib.c: New test.
* gcc.target/tic6x/cold-lc.c: New test.
* gcc.target/tic6x/longcalls.c: New test.
* gcc.target/tic6x/abi-align-1.c: New test.
* gcc.target/tic6x/fpcmp-finite.c: New test.
* gcc.target/tic6x/rotdi16.c: New test.
* gcc.target/tic6x/bswapl.c: New test.
* gcc.target/tic6x/ffsdi.c: New test.
* gcc.target/tic6x/tic6x.exp: New file.
* gcc/testsuite/gcc.target/tic6x/builtins/arith24.c: New test.
* gcc/testsuite/gcc.target/tic6x/builtins/smpy.c: New test.
* gcc/testsuite/gcc.target/tic6x/builtins/smpylh.c: New test.
* gcc/testsuite/gcc.target/tic6x/builtins/smpyh.c: New test.
* gcc/testsuite/gcc.target/tic6x/builtins/sarith1.c: New test.
* gcc/testsuite/gcc.target/tic6x/builtins/extclr.c: New test
* gcc/testsuite/gcc.target/tic6x/builtins/c6x-builtins.exp: New file.
* gcc.target/tic6x/builtin-math-7.c: New test, adapted from gcc.dg.
* lib/target-supports.exp (chck_profiling_available): Not on tic6x.
(check_effective_target_ti_c67x, check_effective_target_ti_c64xp):
New functions.
* gcc.c-torture/execute/20101011-1.c: Add a condition for
__TMS320C6X__.
* gcc.dg/20020312-2.c: Likewise.
* gcc.dg/pr27095.c: Handle tic6x like hppa.
* gcc.dg/torture/pr37868.c: Skip on tic6x.
* gcc.dg/torture/builtin-math-7.c: Likewise.
gcc/
* doc/invoke.texi (C6X Options): New section.
* doc/md.texi (TI C6X family): New section.
* config.gcc: Handle tic6x, in particular tic6x-*-elf and
tic6x-*-uclinux.
* longlong.h (add_ssaaaa, __umulsidi3, umul_ppmm,
count_leading_zeros, count_trailing_zeros, UMUL_TIME, UDIV_TIME):
Provide C6X definitions.
* config/c6x/c6x.md: New file.
* config/c6x/constraints.md: New file.
* config/c6x/predicates.md: New file.
* config/c6x/c6x-sched.md.in: New file.
* config/c6x/c6x-sched.md: New file.
* config/c6x/gensched.sh: New file.
* config/c6x/c6x-mult.md.in: New file.
* config/c6x/genmult.sh: New file.
* config/c6x/c6x-mult.md: New file.
* config/c6x/sync.md: New file.
* config/c6x/c6x-protos.h: New file.
* config/c6x/sfp-machine.h: New file.
* config/c6x/c6x.c: New file.
* config/c6x/c6x.h: New file.
* config/c6x/crti.s: New file.
* config/c6x/crtn.s: New file.
* config/c6x/lib1funcs.asm: New file.
* config/c6x/c6x-modes.def: New file.
* config/c6x/genopt.sh: New file.
* config/c6x/c6x.opt: New file.
* config/c6x/c6x-tables.opt: New file.
* config/c6x/c6x-opts.h: New file.
* config/c6x/c6x-isas.def: New file.
* config/c6x/elf.h: New file.
* config/c6x/elf-common.h: New file.
* config/c6x/uclinux-elf.h: New file.
* config/c6x/t-c6x: New file.
* config/c6x/t-c6x-elf: New file.
* config/c6x/t-c6x-uclinux: New file.
* config/c6x/t-c6x-softfp: New file.
* config/c6x/gtd.c: New file.
* config/c6x/gtf.c: New file.
* config/c6x/ltd.c: New file.
* config/c6x/ltf.c: New file.
* config/c6x/ged.c: New file.
* config/c6x/gef.c: New file.
* config/c6x/led.c: New file.
* config/c6x/lef.c: New file.
* config/c6x/eqd.c: New file.
* config/c6x/eqf.c: New file.
* config/c6x/libgcc-c6xeabi.ver: New file.
* haifa-sched.c (schedule_insns): Remove outdated comment.
(schedule_block): When computing a known value for TODO_SPEC,
just set it rather than using logical operations.
(try_ready): Likewise. Use a local variable rather than a
pointer to TODO_SPEC. Reorder an if statement to move the
easy case to the then block.
* sched-deps.c (dep_spec_p): New static function.
(update_dep): Use it to decide whether to call
change_spec_dep_to_hard.
(get_back_and_forw_lists): Use it.
(sd_resolve_dep): Likewise.
(init_dep): If !USE_DEPS_LIST, use zero to initialize status.
(haifa_note_mem_dep): Likewise.
(check_dep): Likewise.
(sd_add_dep): Also clear SPECULATIVE bits if not DO_SPECULATION.
(sched_free_deps): Free in two passes.
* plugin-api.h
(ld_plugin_section): New struct.
(ld_plugin_get_section_count): New typedef.
(ld_plugin_get_section_type): New typedef.
(ld_plugin_get_section_name): New typedef.
(ld_plugin_get_section_contents): New typedef.
(ld_plugin_update_section_order): New typedef.
(ld_plugin_allow_section_ordering): New typedef.
(LDPT_GET_SECTION_COUNT): New enum value.
(LDPT_GET_SECTION_TYPE): New enum value.
(LDPT_GET_SECTION_NAME): New enum value.
(LDPT_GET_SECTION_CONTENTS): New enum value.
(LDPT_UPDATE_SECTION_ORDER): New enum value.
(LDPT_ALLOW_SECTION_ORDERING): New enum value.
(tv_get_section_count): New struct members.
(tv_get_section_type): New struct members.
(tv_get_section_name): New struct members.
(tv_get_section_contents): New struct members.
(tv_update_section_order): New struct members.
(tv_allow_section_ordering): New struct members.
* haifa-sched.c: Include "hashtab.h"
(sched_no_dce): New global variable.
(INSN_EXACT_TICK, INSN_TICK_ESTIMATE, FEEDS_BACKTRACK_INSN,
SHADOW_P): New macros.
(last_clock_var, cycle_issued_insns): Move declarations.
(must_backtrack): New static variable.
(struct delay_pair): New structure.
(delay_htab, delay_htab_i2): New static variables.
(delay_hash_i1, delay_hash_i2, delay_i1_eq, delay_i2_eq,
record_delay_slot_pair, pair_delay, add_delay_dependencies): New
functions.
(dep_cost_1): If delay pairs exist, try to look up the insns and
use the correct pair delay if we find them.
(rank-for_schedule): Tweak priority for insns that must be scheduled
soon to avoid backtracking.
(queue_insn): Detect conditions which force backtracking.
(ready_add): Likewise.
(struct sched_block_state): Add member shadows_only_p.
(struct haifa_save_data): New structure.
(backtrack_queue): New static variable.
(mark_backtrack_feeds, copy_insn_list, save_backtrack_point,
unschedule_insns_until, restore_last_backtrack_point,
free_topmost_backtrack_point, free_backtrack_queue,
estimate_insn_tick, estimate_shadow_tick): New functions.
(prune_ready_list): New arg shadows_only_p. All callers changed.
If true, remove everything that isn't SHADOW_P. Look up delay
pairs and estimate ticks to avoid scheduling the first insn too
early.
(verify_shadows): New function.
(schedule_block): Add machinery to enable backtracking.
(sched_init): Take sched_no_dce into account when setting
DF_LR_RUN_DCE.
(free_delay_pairs): New function.
(init_h_i_d): Initialize INSN_EXACT_TICK.
* Makefile.in (haifa-sched.o): Add $(HASHTAB_H).
* sched-deps.c (sd_unresolve_dep): New function.
* sched-int.h (struct haifa_sched_info): New fields save_state
and restore_state.
(struct _haifa_insn_data): New fields exact_tick, tick_estimate,
feeds_backtrack_insn and shadow_p.
(DO_BACKTRACKING): New value in enum SCHED_FLAGS.
(sched_no_dce): Declare variable.
(record_delay_slot_pair, free_delay_pairs, add_delay_dependencies,
sd_unresolve_dep): Declare functions.
* modulo-sched.c (sms_sched_info): Clear the two new fields.
* sched-rgn.c (rgn_const_sched_info): Likewise.
* sel-sched-ir.c (sched_sel_haifa_sched_info): Likewise.
* sched-ebb.c (save_ebb_state, restore_ebb_state): New functions.
(ebb_sched_info): Add them for the two new fields.
(add_deps_for_risky_insns): Call add_delay_dependencies.
Jason Merrill [Wed, 13 Jul 2011 20:30:54 +0000 (16:30 -0400)]
Also test -std=c++0x mode with 'make check-c++' at top level
Also test -std=c++0x mode with 'make check-c++' at top level
* Makefile.in (check-gcc-c++0x): New.
(check-c++): Depend on it.
gcc/
* Makefile.in ($(lang_checks_parallelized)): Allow --tool_opts.
gcc/cp/
* Make-lang.in (check-c++0x): New.
gcc/testsuite/
* lib/g++.exp (${tool}_option_help, ${tool}_option_proc): Remove.
* lib/lto.exp (lto_prune_warns): Prune warning about -std=c++0x
when compiling C files.
* config/spu/spu.c (TARGET_ASM_FILE_START): Do not define.
(asm_file_start): Remove.
(spu_machine_dependent_reorg): Call compute_bb_for_insn and
free_bb_for_insn around code that modifies insns before
restarting df analysis.
Janne Blomqvist [Wed, 13 Jul 2011 18:46:44 +0000 (21:46 +0300)]
PR 49296 List read, EOF without preceding separator
2011-07-13 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/49296
* io/list_read.c (read_logical): Don't error out if a valid value
is followed by EOF instead of a normal separator.
(read_integer): Likewise.
testsuite:
2011-07-13 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/49296
* gfortran.dg/read_list_eof_1.f90: Add tests for integer, real,
and logical reads.
libgcc:
* config/i386/crtprec.c: New file.
* config/i386/t-crtpc: Use $(srcdir) to refer to crtprec.c.
* config.host (i[34567]86-*-darwin*): Add i386/t-crtpc to tmake_file.
Add crtprec32.o, crtprec64.o, crtprec80.o to extra_parts.
(x86_64-*-darwin*): Likewise.
(i[34567]86-*-solaris2*: Likewise.
gcc/testsuite:
* gcc.c-torture/execute/990127-2.x: Use -mpc64 on i?86-*-darwin*,
i?86-*-solaris2*, x86_64-*-darwin*, x86_64-*-solaris2*.
libgcc:
* config/alpha/crtfastmath.c: New file.
* config/i386/crtfastmath.c: New file.
* config/ia64/crtfastmath.c: New file.
* config/mips/crtfastmath.c: New file.
* config/sparc/crtfastmath.c: New file.
* config/t-crtfm (crtfastmath.o): Use $(srcdir) to refer to
crtfastmath.c.
Add -frandom-seed=gcc-crtfastmath.
* config/alpha/t-crtfm: Remove.
* config/i386/t-crtfm: Use $(srcdir) to refer to crtfastmath.c.
* config/ia64/t-ia64 (crtfastmath.o): Remove.
* config.host (alpha*-*-linux*): Replace alpha/t-crtfm by t-crtfm.
(alpha*-dec-osf5.1*): Likewise.
(alpha*-*-freebsd*): Add t-crtfm to tmake_file.
Add crtfastmath.o to extra_parts.
(i[34567]86-*-darwin*): Add i386/t-crtfm to tmake_file.
Add crtfastmath.o to extra_parts.
(x86_64-*-darwin*): Likewise.
(x86_64-*-mingw*): Likewise.
(ia64*-*-elf*): Add t-crtfm to tmake_file.
(ia64*-*-freebsd*): Likewise.
(ia64*-*-linux*): Likewise.
(sparc64-*-freebsd*): Add t-crtfm to tmake_file.
Add crtfastmath.o to extra_parts.
libgcc:
* config/darwin-crt3.o: New file.
* config/rs6000/darwin-crt2.c: New file.
* config/t-darwin: New file.
* config/rs6000/t-darwin (DARWIN_EXTRA_CRT_BUILD_CFLAGS): New variable.
(crt2.o): New rule.
* config.host (*-*-darwin*): Add crt3.o to extra_parts.
(powerpc-*-darwin*): Add crt2.o to extra_parts.
(powerpc64-*-darwin*): Likewise.
* doc/tm.texi.in (TARGET_ASM_MERGEABLE_RODATA_PREFIX): Add hook.
* doc/tm.texi: Regenerate.
* target.def (mergeable_rodata_prefix: New defhookpod.
* varasm.c (mergeable_string_section, mergeable_constant_section):
Use it. Allocate name with alloca.
gcc/
* tree.h (categorize_ctor_elements): Remove comment. Fix long line.
(count_type_elements): Delete.
(complete_ctor_at_level_p): Declare.
* expr.c (flexible_array_member_p): New function, split out from...
(count_type_elements): ...here. Make static. Replace allow_flexarr
parameter with for_ctor_p. When for_ctor_p is true, return the
number of elements that should appear in the top-level constructor,
otherwise return an estimate of the number of scalars.
(categorize_ctor_elements): Replace p_must_clear with p_complete.
(categorize_ctor_elements_1): Likewise. Use complete_ctor_at_level_p.
(complete_ctor_at_level_p): New function, borrowing union logic
from old categorize_ctor_elements_1.
(mostly_zeros_p): Return true if the constructor is not complete.
(all_zeros_p): Update call to categorize_ctor_elements.
* gimplify.c (gimplify_init_constructor): Update call to
categorize_ctor_elements. Don't call count_type_elements.
Unconditionally prevent clearing for variable-sized types,
otherwise rely on categorize_ctor_elements to detect
incomplete initializers.
gcc/cp/
* typeck2.c (split_nonconstant_init_1): Pass the initializer directly,
rather than a pointer to it. Return true if the whole of the value
was initialized by the generated statements. Use
complete_ctor_at_level_p instead of count_type_elements.
* sched-int.h (struct _dep): Add member cost.
(DEP_COST, UNKNOWN_DEP_COST): New macros.
* sched-deps.c (init_dep_1): Initialize DEP_COST.
* haifa-sched.c (dep_cost_1): Use and set DEP_COST.
(sched_change_pattern): Reset it for dependent insns.
Eric Botcazou [Tue, 12 Jul 2011 20:07:09 +0000 (20:07 +0000)]
cse.c (insert_with_costs): Put semi-colon after empty loop body on the next line.
* cse.c (insert_with_costs): Put semi-colon after empty loop body
on the next line.
* emit-rtl.c (push_to_sequence): Likewise.
* haifa-sched.c (max_issue): Likewise.
* matrix-reorg.c (add_allocation_site): Likewise.
* postreload-gcse.c (eliminate_partially_redundant_load): Likewise.
* reload.c (alternative_allows_const_pool_ref): Likewise.
* sched-rgn.c (rgn_add_block): Likewise.
(rgn_fix_recovery_cfg): Likewise.
* tree.c (attribute_list_contained): Likewise.
c-family/
* c-ada-spec.c (dump_nested_types): Put semi-colon after empty loop
body on the next line.
re PR target/49713 (Conflicting types for 'arm_dbx_register_number')
PR target/49713
* dwarf2out.h (dwarf_frame_regnum): Remove.
* dwarf2out.c (based_loc_descr): Revert last change. Initialize regno
earlier from DWARF_FRAME_REGNUM. Never use dbx_reg_number.
* dwarf2cfi.c (dw_stack_pointer_regnum, dw_frame_pointer_regnum): New.
(execute_dwarf2_frame): Initialize them.
(DW_STACK_POINTER_REGNUM, DW_FRAME_POINTER_REGNUM): Remove; replace
users of the macros with the variables.
(expand_builtin_dwarf_sp_column): Revert last change.
(expand_builtin_init_dwarf_reg_sizes): Likewise. Compute the
result of DWARF_FRAME_REGNUM into a local variable.
predicates.md (neon_struct_operand): Make a normal predicate.
gcc/
* config/arm/predicates.md (neon_struct_operand): Make a normal
predicate.
(neon_struct_or_register_operand): New predicate.
* config/arm/neon.md (movmisalign<mode>): Replace predicates
with neon_struct_or_register_operand.
(*movmisalign<mode>_neon_store, *movmisalign<mode>_neon_load): Use
neon_struct_operand instead of memory_operand.
Jason Merrill [Mon, 11 Jul 2011 21:03:19 +0000 (17:03 -0400)]
re PR c++/49672 ([C++0x] Internal error when passing variadic template args to a lambda function)
PR c++/49672
* pt.c (extract_fnparm_pack): Split out from...
(make_fnparm_pack): ...here.
(instantiate_decl): Handle non-pack parms after a pack.
* semantics.c (maybe_add_lambda_conv_op): Don't in a template.
* dwarf2cfi.c (DW_STACK_POINTER_REGNUM): New.
(DW_FRAME_POINTER_REGNUM): New.
(expand_builtin_init_dwarf_reg_sizes): Use unsigned for rnum.
(def_cfa_1): Do not convert reg to DWARF_FRAME_REGNUM here.
(dwf_regno): New.
(dwarf2out_flush_queued_reg_saves, dwarf2out_frame_debug_def_cfa,
dwarf2out_frame_debug_adjust_cfa, dwarf2out_frame_debug_cfa_register,
dwarf2out_frame_debug_cfa_expression, dwarf2out_frame_debug_expr):
Use it.
* dwarf2out.c (based_loc_descr): Use dwarf_frame_regnum.
* dwarf2out.h (dwarf_frame_regnum): New.
(struct cfa_loc): Document the domain of the reg member.
git://gcc.gnu.org / gcc.git / log