Patrick Palka [Wed, 9 Mar 2022 23:48:52 +0000 (18:48 -0500)]
libstdc++: Avoid implicit narrowing from uint128_t [PR104859]
We need to be explicit about narrowing conversions from uint128_t since,
on targets that lack __int128, this type is defined as an integer-class
type that is only _explicitly_ convertible to the builtin integer types.
This issue was latent until r12-7563-ge32869a17b788b made the frontend
correctly reject explicit conversion functions during (dependent)
copy-initialization.
PR libstdc++/104859
libstdc++-v3/ChangeLog:
* src/c++17/floating_to_chars.cc (__floating_to_chars_hex):
Be explicit when narrowing the shifted effective_mantissa,
since it may have an integer-class type.
C2x has since completely removed unprototyped function types, making
() in a function declaration mean (void) as in C++. While that change
isn't appropriate at the current development stage for GCC 12, it does
mean that it doesn't make sense for GCC 12 to have different rules for
unprototyped functions in C2x mode than in other modes or previous and
subsequent GCC versions. Thus, revert the previous change to avoid it
getting into a GCC release, and update the corresponding tests to
expect the same behavior with -std=c2x as with -std=c11 (they will of
course need to change again after implementing () as meaning (void)).
Bootstrapped with no regressions for x86_64-pc-linux-gnu.
gcc/c/
* c-typeck.cc (function_types_compatible_p): Do not handle C2X
differently from earlier standards for unprototyped function type
compatibility.
gcc/testsuite/
* gcc.dg/c11-unproto-1.c, gcc.dg/c11-unproto-2.c: Update comments.
* gcc.dg/c2x-unproto-1.c, gcc.dg/c2x-unproto-2.c: Expect same
results as in C11 mode. Update comments.
toplevel: Makefile.def: Make configure-sim depend on all-readline
Without this, a "make all-sim" without the equivalent of
libreadline-dev installed on the build system, won't
properly pick up the in-tree readline build, and you'll see:
mkdir -p -- ./sim
Configuring in ./sim
configure: creating cache ./config.cache
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... cris-axis-elf
checking for x86_64-pc-linux-gnu-gcc... gcc
checking whether the C compiler works... yes
...
checking for library containing tgetent... -ltermcap
checking for readline in -lreadline... no
configure: error: the required "readline" library is missing
make[1]: *** [Makefile:11188: configure-sim] Error 1
make[1]: Leaving directory '/home/hp/sim/b'
The sim dependency on readline is apparently (nominally)
valid as there's a readline call in sim/erc32/sis.c.
2022-02-21 Hans-Peter Nilsson <hp@axis.com>
* Makefile.def (dependencies): Make configure-sim depend on
all-readline.
* Makefile.in: Regenerate.
Tobias Burnus [Wed, 9 Mar 2022 18:34:48 +0000 (19:34 +0100)]
GCN: Implement __atomic_compare_exchange_{1,2} in libgcc [PR102215]
libgcc/ChangeLog:
PR target/102215
* config/gcn/atomic.c (__sync_val_compare_and_swap_##SIZE): Move
a line up to non-arg-dependent value first.
(__ATOMIC_COMPARE_EXCHANGE): Define + call to generate
__atomic_compare_exchange_{1,2}.
Richard Biener [Wed, 9 Mar 2022 14:17:27 +0000 (15:17 +0100)]
Restore INDIRECT_REF asm operand heuristic with MEM_REF
As noticed we are looking for INDIRECT_REF with allows_mem to avoid
a copy since then we're sure the operand is in memory (assuming
*& is folded). But INDIRECT_REFs are no longer a thing, the following
replaces the check with a check for a MEM_REF with a non-ADDR_EXPR
operand. This should fix the regression part without fully
exploring all possibilities around tcc_reference operands.
I've placed an assert that we do not see an INDIRECT_REF here.
While we gimplify asm operands we never do any checking on its
IL afterwards.
2022-03-09 Richard Biener <rguenther@suse.de>
* cfgexpand.cc (expand_gimple_asm): Special-case MEM_REF
with non-decl operand, avoiding a copy.
Jakub Jelinek [Wed, 9 Mar 2022 14:25:30 +0000 (15:25 +0100)]
x86: Define LIBGCC2_UNWIND_ATTRIBUTE on ia32 [PR104781]
On Mon, Mar 07, 2022 at 07:06:28AM -0800, H.J. Lu wrote:
> Since eh_return doesn't work with stack realignment, disable SSE on
> unwind-c.c and unwind-dw2.c to avoid stack realignment with the 4-byte
> incoming stack to avoid SSE usage which is caused by
The following change does that using LIBGCC2_UNWIND_ATTRIBUTE macro instead,
for ia32 only by forcing -mgeneral-regs-only on routines that call
__builtin_eh_return in libgcc.
2022-03-09 Jakub Jelinek <jakub@redhat.com>
PR target/104781
* config/i386/i386.h (LIBGCC2_UNWIND_ATTRIBUTE): Define for ia32.
When processing a non-dependent decltype operand we want to instantiate
it even if it's non-constant, since non-dependent decltype is always
resolved ahead of time. But currently finish_decltype_type uses
instantiate_non_dependent_expr, which instantiates only potentially
constant expressions, and this causes us to miss diagnosing the narrowing
conversion in S{id(v)} in the below testcase because we never instantiate
this non-constant non-dependent decltype operand.
In light of
> On Mon, 7 Mar 2022, Jason Merrill wrote:
>> On 3/7/22 14:41, Patrick Palka wrote:
>>> instantiate_non_dependent_expr instantiates only potentially constant
>>> expressions
>>
>> Hmm, that now strikes me as a problematic interface, as we don't know whether
>> what we get back is template or non-template trees.
this patch drops the potentially-constant check in i_n_d_e and turns
its dependence check into a checking_assert, since most callers already
check that the argument is non-dependent; thus i_n_d_e now instantiates
even non-constant expressions and always returns non-templated trees.
This patch also relaxes the dependence check in i_n_d_e to use the
_uneval version (since that's what finish_decltype_type uses) and
strengthens the dependence checks used by other callers accordingly.
In cp_parser_parenthesized_expression_list_elt we were calling
instantiate_non_dependent_expr (when parsing an attribute list) without
first checking for non-dependence. We could fix this by guarding the
call appropriately, but I noticed we also fold non-dependent attributes
later from cp_check_const_attribute, so this earlier folding is at best
redundant. And it currently causes us to reject constexpr-attribute4.C
below due to the second folding seeing non-templated trees. Thus the
right solution here seems to be to remove this unguarded call to i_n_d_e
so that we end up instantiating non-dependent attributes only once.
Finally, after calling i_n_d_e in finish_decltype_type we need to keep
processing_template_decl cleared for sake of the later call to
lvalue_kind, which handles templated and non-templated COND_EXPR
differently. Otherwise we'd incorrectly reject the declaration of g in
cpp0x/cond2.C with:
error: 'g' declared as function returning a function
PR c++/104823
gcc/cp/ChangeLog:
* except.cc (build_noexcept_spec): Strengthen dependence check
to instantiation_dependent_expression_p.
* parser.cc (cp_parser_parenthesized_expression_list_elt):
Remove fold_expr_p parameter, and don't call
instantiate_non_dependent_expr.
(cp_parser_parenthesized_expression_list): Adjust accordingly.
* pt.cc (expand_integer_pack): Strengthen dependence check
to instantiation_dependent_expression_p.
(instantiate_non_dependent_expr_internal): Adjust comment.
(instantiate_non_dependent_expr_sfinae): Likewise. Drop
the potentially-constant check, and relax and turn the
dependence check into a checking assert.
(instantiate_non_dependent_or_null): Adjust comment.
* semantics.cc (finish_decltype_type): Keep
processing_template_decl cleared after calling
instantiate_non_dependent_expr_sfinae.
Patrick Palka [Wed, 9 Mar 2022 13:42:32 +0000 (08:42 -0500)]
c++: detecting copy-init context during CTAD [PR102137]
Here we're failing to communicate to cp_finish_decl from tsubst_expr
that we're in a copy-initialization context (via the LOOKUP_ONLYCONVERTING
flag), which causes us to always consider explicit deduction guides when
performing CTAD for a templated variable initializer.
It turns out this bug also affects consideration of explicit conversion
operators for the same reason. But consideration of explicit constructors
seems unaffacted thanks to code in build_aggr_init that sets
LOOKUP_ONLYCONVERTING when the initializer represents copy-initialization.
So this patch fixes this by making cp_finish_decl set LOOKUP_ONLYCONVERTING
just like build_aggr_init does, by inspecting the initializer, so that
callers don't need to explicitly pass this flag appropriately.
PR c++/102137
PR c++/87820
gcc/cp/ChangeLog:
* cp-tree.h (is_copy_initialization): Declare.
* decl.cc (cp_finish_decl): Set LOOKUP_ONLYCONVERTING
when is_copy_initialization is true.
* init.cc (build_aggr_init): Split out copy-initialization
check into ...
(is_copy_initialization): ... here.
* pt.cc (instantiate_decl): Pass 0 instead of
LOOKUP_ONLYCONVERTING as flags to cp_finish_decl.
gcc/testsuite/ChangeLog:
* g++.dg/cpp0x/explicit15.C: New test.
* g++.dg/cpp1z/class-deduction108.C: New test.
Patrick Palka [Wed, 9 Mar 2022 13:42:19 +0000 (08:42 -0500)]
c++: merge default targs for function templates [PR65396]
We currently merge default template arguments for class templates, but
not for function templates. This patch fixes this by factoring out the
argument merging logic in redeclare_class_template into a separate
function and using it in duplicate_decls as well.
PR c++/65396
gcc/cp/ChangeLog:
* cp-tree.h (merge_default_template_args): Declare.
* decl.cc (merge_default_template_args): Define, factored out
from redeclare_class_template.
(duplicate_decls): Use it when merging member function template
and free function declarations.
* pt.cc (redeclare_class_template): Factor out default argument
merging logic into merge_default_template_args. Improve location
of a note when there's a template parameter kind mismatch.
gcc/testsuite/ChangeLog:
* g++.dg/cpp0x/vt-34314.C: Adjust expected location of
"redeclared here" note.
* g++.dg/template/pr92440.C: Likewise.
* g++.old-deja/g++.pt/redecl1.C: Adjust expected location of
"redefinition of default argument" error.
* g++.dg/template/defarg23.C: New test.
* g++.dg/template/defarg23a.C: New test.
Richard Biener [Wed, 9 Mar 2022 09:55:49 +0000 (10:55 +0100)]
middle-end/104786 - ICE with asm and VLA
The following fixes an ICE observed with a MEM_REF allows_mem asm
operand referencing a VLA. The following makes sure to not attempt
to go the temporary creation way when we cannot.
2022-03-09 Richard Biener <rguenther@suse.de>
PR middle-end/104786
* cfgexpand.cc (expand_asm_stmt): Do not generate a copy
for VLAs without an upper size bound.
Jakub Jelinek [Wed, 9 Mar 2022 08:15:28 +0000 (09:15 +0100)]
c, c++, c-family: -Wshift-negative-value and -Wshift-overflow* tweaks for -fwrapv and C++20+ [PR104711]
As mentioned in the PR, different standards have different definition
on what is an UB left shift. They all agree on out of bounds (including
negative) shift count.
The rules used by ubsan are:
C99-C2x ((unsigned) x >> (uprecm1 - y)) != 0 then UB
C++11-C++17 x < 0 || ((unsigned) x >> (uprecm1 - y)) > 1 then UB
C++20 and later everything is well defined
Now, for C++20, I've in the P1236R1 implementation added an early
exit for -Wshift-overflow* warning so that it never warns, but apparently
-Wshift-negative-value remained as is. As it is well defined in C++20,
the following patch doesn't enable -Wshift-negative-value from -Wextra
anymore for C++20 and later, if users want for compatibility with C++17
and earlier get the warning, they still can by using -Wshift-negative-value
explicitly.
Another thing is -fwrapv, that is an extension to the standards, so it is up
to us how exactly we define that case. Our ubsan code treats
TYPE_OVERFLOW_WRAPS (type0) and cxx_dialect >= cxx20 the same as only
diagnosing out of bounds shift count and nothing else and IMHO it is most
sensical to treat -fwrapv signed left shifts the same as C++20 treats
them, https://eel.is/c++draft/expr.shift#2
"The value of E1 << E2 is the unique value congruent to E1×2^E2 modulo 2^N,
where N is the width of the type of the result.
[Note 1: E1 is left-shifted E2 bit positions; vacated bits are zero-filled.
— end note]"
with no UB dependent on the E1 values. The UB is only
"The behavior is undefined if the right operand is negative, or greater
than or equal to the width of the promoted left operand."
Under the hood (except for FEs and ubsan from FEs) GCC middle-end doesn't
consider UB in left shifts dependent on the first operand's value, only
the out of bounds shifts.
While this change isn't a regression, I'd think it is useful for GCC 12,
it doesn't add new warnings, but just removes warnings that aren't
appropriate.
2022-03-09 Jakub Jelinek <jakub@redhat.com>
PR c/104711
gcc/
* doc/invoke.texi (-Wextra): Document that -Wshift-negative-value
is enabled by it only for C++11 to C++17 rather than for C++03 or
later.
(-Wshift-negative-value): Similarly (except here we stated
that it is enabled for C++11 or later).
gcc/c-family/
* c-opts.cc (c_common_post_options): Don't enable
-Wshift-negative-value from -Wextra for C++20 or later.
* c-ubsan.cc (ubsan_instrument_shift): Adjust comments.
* c-warn.cc (maybe_warn_shift_overflow): Use TYPE_OVERFLOW_WRAPS
instead of TYPE_UNSIGNED.
gcc/c/
* c-fold.cc (c_fully_fold_internal): Don't emit
-Wshift-negative-value warning if TYPE_OVERFLOW_WRAPS.
* c-typeck.cc (build_binary_op): Likewise.
gcc/cp/
* constexpr.cc (cxx_eval_check_shift_p): Use TYPE_OVERFLOW_WRAPS
instead of TYPE_UNSIGNED.
* typeck.cc (cp_build_binary_op): Don't emit
-Wshift-negative-value warning if TYPE_OVERFLOW_WRAPS.
gcc/testsuite/
* c-c++-common/Wshift-negative-value-1.c: Remove
dg-additional-options, instead in target selectors of each diagnostic
check for exact C++ versions where it should be diagnosed.
* c-c++-common/Wshift-negative-value-2.c: Likewise.
* c-c++-common/Wshift-negative-value-3.c: Likewise.
* c-c++-common/Wshift-negative-value-4.c: Likewise.
* c-c++-common/Wshift-negative-value-7.c: New test.
* c-c++-common/Wshift-negative-value-8.c: New test.
* c-c++-common/Wshift-negative-value-9.c: New test.
* c-c++-common/Wshift-negative-value-10.c: New test.
* c-c++-common/Wshift-overflow-1.c: Remove
dg-additional-options, instead in target selectors of each diagnostic
check for exact C++ versions where it should be diagnosed.
* c-c++-common/Wshift-overflow-2.c: Likewise.
* c-c++-common/Wshift-overflow-5.c: Likewise.
* c-c++-common/Wshift-overflow-6.c: Likewise.
* c-c++-common/Wshift-overflow-7.c: Likewise.
* c-c++-common/Wshift-overflow-8.c: New test.
* c-c++-common/Wshift-overflow-9.c: New test.
* c-c++-common/Wshift-overflow-10.c: New test.
* c-c++-common/Wshift-overflow-11.c: New test.
* c-c++-common/Wshift-overflow-12.c: New test.
Jakub Jelinek [Wed, 9 Mar 2022 08:12:38 +0000 (09:12 +0100)]
simplify-rtx: Fix up SUBREG_PROMOTED_SET arguments [PR104839]
The following testcase is miscompiled on powerpc64le-linux at -O1 and higher
(except for -Og). The bug was introduced in r12-3252-gcad36f38576a6a7
which for SIGN_EXTEND from SUBREG_PROMOTED_SIGNED_P SUBREG used
SUBREG_PROMOTED_SET (temp, 1) (but that makes temp
SUBREG_PROMOTED_UNSIGNED_P because SRP_UNSIGNED is 1) and similarly the
ZERO_EXTEND from SUBREG_PROMOTED_UNSIGNED_P SUBREG used
SUBREG_PROMOTED_SET (temp, 0) (but that makes temp
SUBREG_PROMOTED_SIGNED_P because SRP_SIGNED is 0).
The following patch fixes that (swaps the 0s and 1s), but for better
readability uses the SRP_* constants.
rtl.h has:
/* Valid for subregs which are SUBREG_PROMOTED_VAR_P(). In that case
this gives the necessary extensions:
0 - signed (SPR_SIGNED)
1 - normal unsigned (SPR_UNSIGNED)
2 - value is both sign and unsign extended for mode
(SPR_SIGNED_AND_UNSIGNED).
-1 - pointer unsigned, which most often can be handled like unsigned
extension, except for generating instructions where we need to
emit special code (ptr_extend insns) on some architectures
(SPR_POINTER). */
The expr.c change in the same commit looks ok to me (passes unsignedp
to SUBREG_PROMOTED_SET, so 0 for signed, 1 for unsigned).
2022-03-09 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/104839
* simplify-rtx.cc (simplify_unary_operation_1) <case SIGN_EXTEND>:
Use SRP_SIGNED instead of incorrect 1 in SUBREG_PROMOTED_SET.
(simplify_unary_operation_1) <case ZERO_EXTEND>: Use SRP_UNSIGNED
instead of incorrect 0 in SUBREG_PROMOTED_SET.
Jonathan Wakely [Tue, 8 Mar 2022 17:40:48 +0000 (17:40 +0000)]
contrib: Fix non-portable sed commands in gcc-descr [PR102664/]
POSIX sed does not support \? or \+ in its Basic Regular Expression
grammar. Replace the \(tags/\)\? part of the pattern with a substitution
to remove ^tags/ before other substitutions. Replace \([0-9]\+\) with
\([0-9][0-9]*\) or with \([1-9][0-9]*\) in release branch numbers, where
a leading zero does not occur.
contrib/ChangeLog:
PR other/102664
* git-descr.sh: Use portable sed commands.
* git-undescr.sh: Likewise.
Roger Sayle [Tue, 8 Mar 2022 23:18:34 +0000 (23:18 +0000)]
PR c++/96329: ICE-on-invalid-code error recovery.
This patch fixes PR c++/96329 which is an ICE-on-invalid-code regression
affecting mainline.
2022-03-08 Roger Sayle <roger@nextmovesoftware.com>
gcc/cp/ChangeLog
PR c++/96329
* parser.cc (cp_parser_linkage_specification): Treat the case where
linkage is error_mark_node as "invalid linkage-specification".
gcc/testsuite/ChangeLog
PR c++/96329
* g++.dg/template/pr96329.C: New test case.
Marek Polacek [Tue, 8 Mar 2022 18:55:15 +0000 (13:55 -0500)]
c++: Wrong error with alias template in class tmpl [PR104108]
In r10-6329 I tried to optimize the number of calls to v_d_e_p in
convert_nontype_argument by remembering whether the expression was
value-dependent in a bool flag. I did that wrongly assuming that its
value-dependence will not be changed by build_converted_constant_expr.
This testcase shows that it can: b_c_c_e gets a VAR_DECL for m_parameter,
which is not value-dependent, but we're converting it to "const int &"
so it returns
(const int &)(const int *) &m_parameter
which suddenly becomes value-dependent because of the added ADDR_EXPR:
has_value_dependent_address is now true because m_parameter's context S<T>
is dependent. With this bug in place, we went to the second branch here:
if (TYPE_REF_OBJ_P (TREE_TYPE (expr)) && val_dep_p)
/* OK, dependent reference. We don't want to ask whether a DECL is
itself value-dependent, since what we want here is its address. */;
else
{
expr = build_address (expr);
if (invalid_tparm_referent_p (type, expr, complain))
return NULL_TREE;
}
wherein build_address created a bad tree and then i_t_r_p complained.
PR c++/104108
gcc/cp/ChangeLog:
* pt.cc (convert_nontype_argument): Recompute
value_dependent_expression_p after build_converted_constant_expr.
compiler: ignore function type result name in export data
This change ensures that we never output a result name in the export
data if there is only a single result. Previously we would output a ?
if the single result had a name. That made the output unstable,
because the hashing ignores the result name, so whether we output a ?
or not depended on how equal hash elements were handled.
Marek Polacek [Wed, 2 Mar 2022 15:48:26 +0000 (10:48 -0500)]
c++: Attribute deprecated/unavailable divergence
Attributes deprecated and unavailable are largely the same, except
that the former produces a warning whereas the latter produces an error.
So is_late_template_attribute should treat them the same. Confirmed by
Iain that this divergence is not intentional:
<https://gcc.gnu.org/pipermail/gcc-patches/2022-February/591007.html>.
gcc/cp/ChangeLog:
* decl2.cc (is_late_template_attribute): Do not defer attribute
unavailable.
* pt.cc (tsubst_enum): Set TREE_UNAVAILABLE.
Harald Anlauf [Tue, 8 Mar 2022 20:47:04 +0000 (21:47 +0100)]
Fortran: do not frontend-optimize MINLOC/MAXLOC for character arrays
gcc/fortran/ChangeLog:
PR fortran/104811
* frontend-passes.cc (optimize_minmaxloc): Do not attempt
frontend-optimization of MINLOC/MAXLOC for character arrays, as
there is no suitable code yet for inline expansion.
gcc/testsuite/ChangeLog:
PR fortran/104811
* gfortran.dg/minmaxloc_16.f90: New test.
Jakub Jelinek [Tue, 8 Mar 2022 20:41:21 +0000 (21:41 +0100)]
c++: Don't suggest cdtor or conversion op identifiers in spelling hints [PR104806]
On the following testcase, we emit "did you mean '__dt '?" in the error
message. "__dt " shows there because it is dtor_identifier, but we
shouldn't suggest those to the user, they are purely internal and can't
be really typed by the user because of the final space in it.
2022-03-08 Jakub Jelinek <jakub@redhat.com>
PR c++/104806
* search.cc (lookup_field_fuzzy_info::fuzzy_lookup_field): Ignore
identifiers with space at the end.
Commits r12-7342 and r12-7344 made some cleanup, leaving
arm_binop_none_none_unone_qualifiers unused.
This is causing build failures with -Werror (eg bootstrap).
This patch fixes the problem by removing the definition of
arm_binop_none_none_unone_qualifiers and
BINOP_NONE_NONE_UNONE_QUALIFIERS which are now unused.
Marek Polacek [Mon, 7 Mar 2022 21:15:46 +0000 (16:15 -0500)]
rtl: ICE with thread_local and inline asm [PR104777]
In r270550, Jakub fixed classify_insn to handle asm goto: if the asm can
jump to a label, the insn should be a JUMP_INSN.
However, as the following testcase shows, non-null ASM_OPERANDS_LABEL_VEC
doesn't guarantee that the rtx has any actual labels it can branch to.
Here, the rtvec has 0 elements because expand_asm_stmt created it:
This causes an ICE in update_br_prob_note: BRANCH_EDGE (bb) crashes
because there's no branch edge. I think we can fix this by checking
that there is at least one label the asm can jump to before wrapping
the ASM_OPERANDS in a JUMP_INSN.
PR rtl-optimization/104777
gcc/ChangeLog:
* rtl.cc (classify_insn): For ASM_OPERANDS, return JUMP_INSN only if
ASM_OPERANDS_LABEL_VEC has at least one element.
Andre Vieira [Tue, 8 Mar 2022 17:46:40 +0000 (17:46 +0000)]
arm: MVE: Relax addressing modes for full loads and stores
This patch relaxes the addressing modes for the mve full load and stores (by
full loads and stores I mean non-widening or narrowing loads and stores resp).
The code before was requiring a LO_REGNUM for these, where this is only a
requirement if the load is widening or the store narrowing.
gcc/ChangeLog:
PR target/104790
* config/arm/arm.h (MVE_STN_LDW_MODE): New MACRO.
* config/arm/arm.cc (mve_vector_mem_operand): Relax constraint on base
register for non widening loads or narrowing stores.
This adds a --param to allow disabling of vectorization of
floating point inductions. Ontop of -Ofast this should allow
549.fotonik3d_r to not miscompare.
Jonathan Wakely [Tue, 8 Mar 2022 09:14:33 +0000 (09:14 +0000)]
libstdc++: Remove incorrect copyright notice from header
This file has the SGI copyright notice, but contains no code from
the SGI STL. It was entirely written by me in 2019, originally as part
of the <memory> header. When I extracted it into a new header I
accidentally copied across the SGI copyright, but that only applies to
some much older parts of <memory>.
Tamar Christina [Tue, 8 Mar 2022 11:32:59 +0000 (11:32 +0000)]
vect: disable bitmask tests on sparc
These testcases declare requiring vect_int which sparc declares as well however
sparc doesn't have an optab to vectorize comparisons so these testcases fail to
vectorize and so the tests fail.
As such best coure of action is to just skip them on sparc as comparisons are
somewhat expected from a target that can do SIMD.
Martin Jambor [Tue, 8 Mar 2022 10:32:15 +0000 (11:32 +0100)]
params: Remove repeated word "that" in parameter description
One of the mistakes reported in PR 104552 is repeated "that" in
description of ipa-cp-recursive-freq-factor which I introduced. This
patch removes one of them.
gcc/ChangeLog:
2022-03-07 Martin Jambor <mjambor@suse.cz>
PR translation/104552
* params.opt (ipa-cp-recursive-freq-factor): Remove repeated word
"that" in the description.
David Malcolm [Mon, 7 Mar 2022 19:19:30 +0000 (14:19 -0500)]
analyzer: fix leak suppression at end of 'main' [PR101983]
PR analyzer/101983 reports what I thought were false positives
from -Wanalyzer-malloc-leak, but on closer inspection, the
analyzer is correctly reporting heap-allocated buffers that are
no longer reachable.
However, these "leaks" occur at the end of "main". The analyzer already
has some logic to avoid reporting leaks at the end of main, where the
leak is detected at the end of the EXIT basic block. However, in this case,
the leak is detected at the clobber in BB 2 here:
<bb 2> :
func (&res);
res ={v} {CLOBBER(eol)};
_4 = 0;
<bb 3> :
<L0>:
return _4;
where we have a chain BB 2 -> BB 3 -> EXIT BB.
This patch generalizes the "are we at the end of 'main'" detection to
handle such cases, silencing -Wanalyzer-malloc-leak on them.
There's a remaining issue where the analyzer unhelpfully describes one
of the leaking values as '<unknown>', rather than 'res.a', but I'm
leaving that for a followup (covered by PR analyzer/99771).
gcc/analyzer/ChangeLog:
PR analyzer/101983
* engine.cc (returning_from_function_p): New.
(impl_region_model_context::on_state_leak): Use it when rejecting
leaks at the return from "main".
gcc/testsuite/ChangeLog:
PR analyzer/101983
* gcc.dg/analyzer/pr101983-main.c: New test.
* gcc.dg/analyzer/pr101983-not-main.c: New test.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
Jonathan Wakely [Mon, 7 Mar 2022 16:08:10 +0000 (16:08 +0000)]
doc: Remove redundant sentence about modules being in C++20
As C++20 has already been published, we don't need to link to the draft
(which is now the C++23 draft anyway). And there's no need to say it's
part of the C++20 spec, or that there might be defect reports. That's
true for everything in C++20, so calling it out here just for Modules
isn't needed.
Jonathan Wakely [Mon, 7 Mar 2022 15:07:05 +0000 (15:07 +0000)]
libstdc++: Use visibility pragmas instead of attributes [PR104807]
The _GLIBCXX_PSEUDO_VISIBILITY macro isn't defined until after including
os_defines.h, so we can't use _GLIBCXX_VISIBILITY early in c++config.
Replace the uses of that macro with #pragma visibility push(default)
instead.
libstdc++-v3/ChangeLog:
PR libstdc++/104807
* include/bits/c++config (__terminate, __glibcxx_assert_fail):
Replace _GLIBCXX_VISIBILITY on function with visibility pragma.
(__is_constant_evaluated): Add visibility pragma.
Martin Liska [Fri, 4 Feb 2022 14:50:17 +0000 (15:50 +0100)]
opts: fix -gtoggle + optimize attribute
Note -fvar-tracking is enabled automatically with OPT_LEVELS_1_PLUS and
so we need to drop it if we are called from optimize attribute and the
option is unset.
PR middle-end/104381
gcc/ChangeLog:
* opts.cc (finish_options): If debug info is disabled
(debug_info_level) and -fvar-tracking is unset, disable it.
Jakub Jelinek [Mon, 7 Mar 2022 14:16:56 +0000 (15:16 +0100)]
Add missing space in various string literals
After more than 2 years I've run my
https://gcc.gnu.org/ml/gcc-patches/2017-02/msg00844.html
script again. While it has lots of false positives, it discovered
two bugs.
2022-03-07 Jakub Jelinek <jakub@redhat.com>
gcc/c/
* c-parser.cc (c_parser_omp_clause_map): Add missing space in string
literal.
gcc/cp/
* parser.cc (cp_parser_omp_clause_map): Add missing space in string
literal.
Jakub Jelinek [Mon, 7 Mar 2022 14:00:20 +0000 (15:00 +0100)]
Fix up duplicated duplicated words in comments
Like in r10-7215-g700d4cb08c88aec37c13e21e63dd61fd698baabc 2 years ago,
I've run
grep -v 'long long\|optab optab\|template template\|double double' *.{[chS],cc} */*.{[chS],cc} *.def config/*/* 2>/dev/null | grep ' \([a-zA-Z]\+\) \1 '
and for the cases that looked clearly wrong changed them, mostly by removing
one of the duplicated words but in some cases with other changes.
2022-03-07 Jakub Jelinek <jakub@redhat.com>
gcc/
* tree-ssa-propagate.cc: Fix up duplicated word issue in a comment.
* config/riscv/riscv.cc: Likewise.
* config/darwin.h: Likewise.
* config/i386/i386.cc: Likewise.
* config/aarch64/thunderx3t110.md: Likewise.
* config/aarch64/fractional-cost.h: Likewise.
* config/vax/vax.cc: Likewise.
* config/rs6000/pcrel-opt.md: Likewise.
* config/rs6000/predicates.md: Likewise.
* ctfc.h: Likewise.
* tree-ssa-uninit.cc: Likewise.
* value-relation.h: Likewise.
* gimple-range-gori.cc: Likewise.
* ipa-polymorphic-call.cc: Likewise.
* pointer-query.cc: Likewise.
* ipa-sra.cc: Likewise.
* internal-fn.cc: Likewise.
* varasm.cc: Likewise.
* gimple-ssa-warn-access.cc: Likewise.
gcc/analyzer/
* store.cc: Fix up duplicated word issue in a comment.
* analyzer.cc: Likewise.
* engine.cc: Likewise.
* sm-taint.cc: Likewise.
gcc/c-family/
* c-attribs.cc: Fix up duplicated word issue in a comment.
gcc/cp/
* cvt.cc: Fix up duplicated word issue in a comment.
* pt.cc: Likewise.
* module.cc: Likewise.
* coroutines.cc: Likewise.
gcc/fortran/
* trans-expr.cc: Fix up duplicated word issue in a comment.
* gfortran.h: Likewise.
* scanner.cc: Likewise.
gcc/jit/
* libgccjit.h: Fix up duplicated word issue in a comment.
Richard Biener [Mon, 7 Mar 2022 10:11:44 +0000 (11:11 +0100)]
tree-optimization/104782 - adjust PR101636 fix
This reverts the reversion of r10-5979 amending the CTOR case
with a comment as to why the conversion is not necessary there.
It also adds a testcase (but not for the CTOR case).
Jakub Jelinek [Mon, 7 Mar 2022 10:14:04 +0000 (11:14 +0100)]
s390: Fix up *cmp_and_trap_unsigned_int<mode> constraints [PR104775]
The following testcase fails to assemble due to clgte %r6,0(%r1,%r10)
insn not being accepted by assembler.
My rough understanding is that in the RSY-b insn format the spot
in other formats used for index registers is used instead for M3 what
kind of comparison it is, so this patch follows what other similar
instructions use for constraint (i.e. one without index register).
2022-03-07 Jakub Jelinek <jakub@redhat.com>
PR target/104775
* config/s390/s390.md (*cmp_and_trap_unsigned_int<mode>): Use
S constraint instead of T in the last alternative.
Jakub Jelinek [Mon, 7 Mar 2022 08:40:51 +0000 (09:40 +0100)]
i386: Fix up cond_{and,ior,xor,mul}* [PR104779]
The following testcase ICEs, because the cond_andv* expander
has vector_operand predicates in both of the commutative inputs
and calls gen_andv*_mask which calls ix86_binary_operator_ok
in its condition, but nothing calls ix86_fixup_binary_operands_no_copy
during the expansion, which means cond_* accepts even operands
like 2 MEMs which then can't be matched.
The following patch handles it like most other insns that the other
cond_* patterns use - by having a separate define_expand that calls
ix86_fixup_binary_operands_no_copy and define_ins with
ix86_binary_operator_ok.
2022-03-07 Jakub Jelinek <jakub@redhat.com>
PR target/104779
* config/i386/sse.md (avx512dq_mul<mode>3<mask_name>): New
define_expand pattern. Rename define_insn to ...
(*avx512dq_mul<mode>3<mask_name>): ... this.
(<code><mode>3_mask): New any_logic define_expand pattern.
(<mask_codefor><code><mode>3<mask_name>): Rename to ...
(*<code><mode>3<mask_name>): ... this.
libstdc++: vxworks: remove stray <iostream> include
There doesn't seem to be any reason for this TU to include
<iostream>, and it causes errors when the resulting libstdc++ is used
on our VxWorks 5.5 target - presumably because now libstdc++ itself
contains an instance of std::ios_base::Init. Which should be mostly
harmless, but apparently isn't, and from a QoI viewpoint should
probably be avoided anyway.
Roger Sayle [Sun, 6 Mar 2022 11:03:00 +0000 (11:03 +0000)]
[Committed] Update gcc.dg/lower-subreg-1.c on ia32.
This updates gcc.dg/lower-subreg-1.c to reflect that the i386 backend now
lowers iordi3 itself, rather than relying on the middle-end's subreg1 pass.
Committed as obvious.
2022-03-06 Roger Sayle <roger@nextmovesoftware.com>
gcc/testsuite/ChangeLog
* gcc.dg/lower-subreg-1.c: Update test case. iordi3 is no longer
lowered by the RTL subreg1 pass on ia32 [even with -mno-stv].
Jakub Jelinek [Sat, 5 Mar 2022 11:20:47 +0000 (12:20 +0100)]
waccess: Remove visited bitmap and stop on EDGE_ABNORMAL
On Fri, Mar 04, 2022 at 02:58:37PM +0100, Jakub Jelinek via Gcc-patches wrote:
> On Thu, Mar 03, 2022 at 05:08:30PM -0700, Martin Sebor wrote:
> > > 1) shouldn't it give up for EDGE_ABNORMAL too? I mean, e.g.
> > > following a non-local goto forced edge from a noreturn call
> > > to a non-local label (if there is just one) doesn't seem
> > > right to me
> >
> > Possibly yes. I can add it but I don't have a lot of experience with
> > these bits so if you can suggest a test case to exercise this that
> > would be helpful.
>
> Something like:
> void
> foo (void)
> {
> __label__ l;
> __attribute__((noreturn)) void bar (int x) { if (x) goto l; __builtin_trap (); }
> bar (0);
> l:;
> }
> shows a single EDGE_ABNORMAL from the bar call.
> But it would need tweaking for the ptr use and clobber.
>
> > > 2) if EDGE_DFS_BACK is computed and 1) is done, is there any
> > > reason why you need 2 levels of protection, i.e. the EDGE_DFS_BACK
> > > check as well as the visited bitmap (and having them use
> > > very different answers, if EDGE_DFS_BACK is seen, the function
> > > will return false, if visited bitmap has a bb, it will return true)?
> > > Can't the visited bitmap go away?
> >
> > Possibly. As I said above, I don't have enough experience with these
> > bits to make (and test) the changes quickly, or enough bandwidth to
> > come up to speed on them. Please feel free to make these improvements.
>
> I'll change that if it passes testing.
Here is a patch to do both. I don't think we really need to have a testcase
for the EDGE_ABNORMAL case (Martin, feel free to add it later), abnormal
edges simply aren't normal control flow and what exactly it means varies.
2022-03-05 Jakub Jelinek <jakub@redhat.com>
* gimple-ssa-warn-access.cc (pass_waccess::use_after_inval_p): Remove
visited bitmap and its use. Also punt on EDGE_ABNORMAL edges.
Roger Sayle [Sat, 5 Mar 2022 08:50:45 +0000 (08:50 +0000)]
PR 104732: Simplify/fix DI mode logic expansion/splitting on -m32.
This clean-up patch resolves PR testsuite/104732, the failure of the recent
test gcc.target/i386/pr100711-1.c on 32-bit Solaris/x86. Rather than just
tweak the testcase, the proposed approach is to fix the underlying problem
by removing the "TARGET_STV && TARGET_SSE2" conditionals from the DI mode
logical operation expanders and pre-reload splitters in i386.md, which as
I'll show generate inferior code (even a GCC 12 regression) on !TARGET_64BIT
whenever -mno-stv (such as Solaris) or -msse (but not -msse2).
First a little bit of history. In the beginning, DImode operations on
i386 weren't defined by the machine description, and lowered during RTL
expansion to SI mode operations. The with PR 65105 in 2015, -mstv was
added, together with a SWIM1248x mode iterator (later renamed to SWIM1248x)
together with several *<code>di3_doubleword post-reload splitters that
made use of register allocation to perform some double word operations
in 64-but XMM registers. A short while later in 2016, PR 70322 added
similar support for one_cmpldi2. All of this logic was dependent upon
"!TARGET_64BIT && TARGET_STV && TARGET_SSE2". With the passing of time,
these conditions became irrelevant when in 2019, it was decided to split
these double-word patterns before reload.
https://gcc.gnu.org/pipermail/gcc-patches/2019-June/523877.html
https://gcc.gnu.org/pipermail/gcc-patches/2019-October/532236.html
Hence the current situation, where on most modern CPU architectures
(where "TARGET_STV && TARGET_SSE2" is true), RTL is expanded with DI
mode operations, that are then split into two SI mode instructions
before reload, except on Solaris and other odd cases, where the splitting
is to two SI mode instructions is done during RTL expansion. By the
time compilation reaches register allocation both paths in theory
produce identical or similar code, so the vestigial legacy/logic would
appear to be harmless.
Unfortunately, there is one place where this arbitrary choice of how
to lower DI mode doubleword operations is visible to the middle-end,
it controls whether the backend appears to have a suitable optab, and
the presence (or not) of DImode optabs can influence vectorization
cost models and veclower decisions.
The issue (and code quality regression) can be seen in this test case:
typedef long long v2di __attribute__((vector_size (16)));
v2di x;
void foo (long long a)
{
v2di t = {a, a};
x = ~t;
}
which when compiled with "-O2 -m32 -msse -march=pentiumpro" produces:
Notice only two "notl" instructions. Checking with godbolt.org, GCC
generated 4 NOTs in GCC 4.x and 5.x, 2 NOTs between GCC 6.x and 9.x,
and regressed to 4 NOTs since GCC 10.x [which hopefully qualifies
this clean-up as suitable for stage 4].
Most significantly, this patch allows pr100711-1.c to pass with
-mno-stv, allowing pandn to be used with V2DImode on Solaris/x86.
Fingers-crossed this should reduce the number of discrepancies
encountered supporting Solaris/x86.
2022-03-05 Roger Sayle <roger@nextmovesoftware.com>
Uroš Bizjak <ubizjak@gmail.com>
gcc/ChangeLog
PR testsuite/104732
* config/i386/i386.md (SWIM1248x): Renamed from SWIM1248s.
Include DI mode unconditionally.
(*anddi3_doubleword): Remove && TARGET_STV && TARGET_SSE2 condition,
i.e. always split on !TARGET_64BIT.
(*<any_or>di3_doubleword): Likewise.
(*one_cmpldi2_doubleword): Likewise.
(and<mode>3 expander): Update to use SWIM1248x from SWIM1248s.
(<any_or><mode>3 expander): Likewise.
(one_cmpl<mode>2 expander): Likewise.
gcc/testsuite/ChangeLog
PR testsuite/104732
* gcc.target/i386/pr104732.c: New test case.
On power10, GCC tries to optimize the signed conversion from DImode to
TImode by using the vextsd2q instruction. However to generate this
instruction, it would have to generate 3 direct moves (1 from the GPR
registers to the altivec registers, and 2 from the altivec registers to
the GPR register).
This patch generates the shift right immediate instruction to do the
conversion if the target/source registers ares GPR registers like it does
on earlier systems. If the target/source registers are Altivec registers,
it will generate the vextsd2q instruction.
2022-03-05 Michael Meissner <meissner@linux.ibm.com>
gcc/
PR target/104698
* config/rs6000/vsx.md (UNSPEC_MTVSRD_DITI_W1): Delete.
(mtvsrdd_diti_w1): Delete.
(extendditi2): Convert from define_expand to
define_insn_and_split. Replace with code to deal with both GPR
registers and with altivec registers.
gcc/testsuite/
PR target/104698
* gcc.target/powerpc/pr104698-1.c: New test.
* gcc.target/powerpc/pr104698-2.c: New test.
This adds more correct .machine for most older CPUs. It should be
conservative in the sense that everything we handled before we handle at
least as well now. This does not yet revamp the server CPU handling, it
is too risky at this point in time.
Tested on powerpc64-linux {-m32,-m64}. Also manually tested with all
-mcpu=, and the output of that passed through the GNU assembler.
David Malcolm [Fri, 4 Mar 2022 18:51:14 +0000 (13:51 -0500)]
analyzer: reduce svalue depth limit from 13 to 12 [PR103521]
PR analyzer/103521 reports that commit r12-5585-g132902177138c09803d639e12b1daebf2b9edddc
("analyzer: further false leak fixes due to overzealous state merging [PR103217]")
led to failures of gcc.dg/analyzer/pr93032-mztools.c on some targets,
where rather than reporting FILE * leaks, the analyzer would hit
complexity limits and give up.
The cause is that pr93032-mztools.c has some 'unsigned char' values that
are copied to 'char'. On targets where 'char' defaults to being signed,
this leads to casts, whereas on targets where 'char' defaults to being
unsigned, no casts are needed.
When the casts occur, various symbolic values within the loop (the
locals 'crc', 'cpsize', and 'uncpsize') become sufficiently complex as
to hit the --param=analyzer-max-svalue-depth= limit, and are treated as
UNKNOWN, allowing the analysis of the loop to quickly terminate, with
much of this state as UNKNOWN (but retaining the FILE * information, and
thus correctly reporting the FILE * leaks).
Without the casts, the symbolic values for these variables don't quite
hit the complexity limit, and the analyzer attempts to track these
values in the loop, leading to the analyzer eventually hitting the
per-program-point limit on the number of states, and giving up on
these execution paths, thus failing to report the FILE * leaks.
This patch tweaks the default value of the param:
--param=analyzer-max-svalue-depth=.
from 13 down to 12. This allows the pr93032-mztools.c testcase to
succeeed with both -fsigned-char and -funsigned-char, and thus allows
this integration test to succeed on both styles of target without
requiring extra command-line flags. The patch duplicates the test so
it runs with both -fsigned-char and -funsigned-char.
My hope is that this will allow similar cases to terminate loop analysis
earlier. I tried reducing it further, but doing so caused some test
cases to regress.
The tradeoff here is between:
(a) precision of individual states in the analysis, versus
(b) maximizing code-path coverage in the analysis
I can imagine a more nuanced approach that splits the current
per-program-point hard limit into soft and hard limits: on hitting the
soft limit at a program point, go into a less precise mode for states
at that program point, in the hope that we can fully explore execution
paths beyond it without hitting the hard limit, but this seems like
GCC 13 material.
Another possible future fix might be for the analysis plan to make an
attempt to prioritize parts of the code in an enode budget, rather than
setting the same hard limit uniformly across all program points.
gcc/analyzer/ChangeLog:
PR analyzer/103521
* analyzer.opt (-param=analyzer-max-svalue-depth=): Reduce from 13
to 12.
gcc/testsuite/ChangeLog:
PR analyzer/103521
* gcc.dg/analyzer/pr93032-mztools.c: Move to...
* gcc.dg/analyzer/pr93032-mztools-signed-char.c: ...this, adding
-fsigned-char to args, and...
* gcc.dg/analyzer/pr93032-mztools-unsigned-char.c: ...copy to here,
adding -funsigned-char to args.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
Iain Sandoe [Fri, 4 Mar 2022 12:34:15 +0000 (12:34 +0000)]
Darwin, libgcc: Fix build errors on powerpc-darwin8.
PowerPC Darwin8 is the last version to use an unwind frame fallback routine.
This had been omitted from the new shared EH library, along with one more
header dependency that only fires there.
Nathan Sidwell [Thu, 3 Mar 2022 00:13:43 +0000 (19:13 -0500)]
c++: New module mangling ABI
This implements a new module mangling ABI as the original one has a
few issues:
a) it was not demangleable (oops)
b) implemented a weak ownership model.
This implements a strong ownership model, so that exported entities
from named modules are mangled to include their module attachment.
This gives more informative linker diagnostics and better module
isolation. Weak ownership was hoped to allow backwards compatibility
with non-modular code, but in practice was very brittle, and C++20
added new semantics for linkage declarations that cover the needed
functionality.
FAOD Clang is also moving to this ABI and documentation will be added
to the Itanium ABI specification.
gcc/cp/
* cp-tree.h (mangle_identifier): Replace with ...
(mangle_module_component): ... this.
* mangle.cc (dump_substitution_candidates): Adjust.
(add_substitution): Likewise.
(find_substitution): Likewise.
(unmangled_name_p): Likewise.
(mangle_module_substitution): Reimplement.
(mangle_module_component): New.
(write_module, maybe_write_module): Adjust.
(write_name): Drop modules here.
(write_unqualified): Do them here instead.
(mangle_global_init): Adjust.
* module.cc (module_state::mangle): Adjust.
(mangle_module): Likewise.
(get_originating_module): Adjust.
Iain Sandoe [Wed, 23 Feb 2022 13:53:44 +0000 (13:53 +0000)]
LRA, rs6000, Darwin: Revise lo_sum use for forced constants [PR104117].
Follow up discussion to the initial patch for this PR identified that it is
preferable to avoid the LRA change, and arrange for the target to reject the
hi and lo_sum selections when presented with an invalid address.
We split the Darwin high/low selectors into two:
1. One that handles non-PIC addresses (kernel mode, mdynamic-no-pic).
2. One that handles PIC addresses and rejects SYMBOL_REFs unless they are
suitably wrapped in the MACHOPIC_OFFSET unspec.
The second case is handled by providing a new predicate (macho_pic_address)
that checks the requirements.
* config/rs6000/darwin.md (@machopic_high_<mode>): New.
(@machopic_low_<mode>): New.
* config/rs6000/predicates.md (macho_pic_address): New.
* config/rs6000/rs6000.cc (rs6000_legitimize_address): Do not
apply the TLS processing to Darwin.
* lra-constraints.cc (process_address_1): Revert the changes
in r12-7209.
Peter Bergner [Fri, 4 Mar 2022 15:03:44 +0000 (09:03 -0600)]
rs6000: Allow -mlong-double-64 after -mabi={ibm,ieee}longdouble [PR104208, PR87496]
The glibc build is showing a build error due to extra "error" checking from my
PR87496 fix. That checking was overeager, disallowing setting the long double
size to 64-bits if the 128-bit long double ABI had already been specified.
Now we only emit an error if we specify a 128-bit long double ABI if our
long double size is not 128 bits. This also fixes an erroneous error when
-mabi=ieeelongdouble is used and ISA 2.06 is not enabled, but the long double
size has been changed to 64 bits.
2022-03-04 Peter Bergner <bergner@linux.ibm.com>
gcc/
PR target/87496
PR target/104208
* config/rs6000/rs6000.cc (rs6000_option_override_internal): Make the
ISA 2.06 requirement for -mabi=ieeelongdouble conditional on
-mlong-double-128.
Move the -mabi=ieeelongdouble and -mabi=ibmlongdouble error checking
from here...
* common/config/rs6000/rs6000-common.cc (rs6000_handle_option):
... to here.
gcc/testsuite/
PR target/87496
PR target/104208
* gcc.target/powerpc/pr104208-1.c: New test.
* gcc.target/powerpc/pr104208-2.c: Likewise.
* gcc.target/powerpc/pr87496-2.c: Swap long double options to trigger
the expected error.
* gcc.target/powerpc/pr87496-3.c: Likewise.
Thomas Schwinge [Wed, 16 Feb 2022 21:24:03 +0000 (22:24 +0100)]
Test 'libgomp.oacc-*/kernels-private-vars-*' with '--param=openacc-kernels=decompose' [PR104784]
Before recent commit 8935589b496f755e08cadf26d8ceddf0dd6e0968
"OMP lowering: Regimplify 'OMP_CLAUSE_MAP_DECL_MAKE_ADDRESSABLE' DECLs
[PR100280, PR104132, PR104133]", 'libgomp.oacc-c' testing already worked fine,
but 'libgomp.oacc-c++' testing ICEed. Via the commit mentioned, the C++
testing ICEs are now resolved, but the underlying issue remains to be looked
into: PR104784 "OpenACC 'kernels' decomposition: C vs. C++ differences".
Jakub Jelinek [Fri, 4 Mar 2022 14:14:59 +0000 (15:14 +0100)]
gimplify: Clear TREE_READONLY on automatic vars being stored into [PR104529]
The following testcase regressed when SRA started punting on stores to
TREE_READONLY vars. We document that:
"In a VAR_DECL, PARM_DECL or FIELD_DECL, or any kind of ..._REF node,
nonzero means it may not be the lhs of an assignment."
so the SRA change looks desirable. On the other side, at least in this
testcase the TREE_READONLY is set there intentionally from the
PR85873 fix, because gimplify_init_constructor itself uses TREE_READONLY
on the object to determine if it can perform promotion to static const
or not.
So, similarly to other spots in the gimplifier where we also clear
TREE_READONLY when we emit IL that stores into the object, this
does the same in gimplify_init_constructor, but in the way so that
the TREE_READONLY test for the promotion to static const keeps working
and doesn't change anything for notify_temp_creation mode, which doesn't
emit any IL, just tests if it would need a temporary or not.
This keeps PR85873 testcase working as before and fixes this regression.
2022-03-04 Jakub Jelinek <jakub@redhat.com>
PR middle-end/104529
* gimplify.cc (gimplify_init_constructor): Clear TREE_READONLY
on automatic objects which will be runtime initialized.
... by generalizing the existing 'gcc/omp-low.cc:task_shared_vars'.
Fix-up for commit 9b32c1669aad5459dd053424f9967011348add83
"OpenACC 'kernels' decomposition: Mark variables used in
synthesized data clauses as addressable [PR100280]".
PR middle-end/100280
PR middle-end/104132
PR middle-end/104133
gcc/
* omp-low.cc (task_shared_vars): Rename to
'make_addressable_vars'. Adjust all users.
(scan_sharing_clauses) <OMP_CLAUSE_MAP> Use it for
'OMP_CLAUSE_MAP_DECL_MAKE_ADDRESSABLE' DECLs, too.
gcc/testsuite/
* c-c++-common/goacc/kernels-decompose-pr104061-1-3.c: Adjust.
* c-c++-common/goacc/kernels-decompose-pr104061-1-4.c: Likewise.
* c-c++-common/goacc/kernels-decompose-pr104132-1.c: Likewise.
* c-c++-common/goacc/kernels-decompose-pr104133-1.c: Likewise.
libgomp/
* testsuite/libgomp.oacc-c-c++-common/kernels-decompose-1.c:
Extend.
Thomas Schwinge [Tue, 15 Feb 2022 22:03:49 +0000 (23:03 +0100)]
OpenACC 'kernels' decomposition: Move 'TREE_ADDRESSABLE' setting into OMP lowering [PR100280]
... in preparation for later changes. No functional change.
Follow-up to commit 9b32c1669aad5459dd053424f9967011348add83
"OpenACC 'kernels' decomposition: Mark variables used in
synthesized data clauses as addressable [PR100280]".
Thomas Schwinge [Tue, 15 Feb 2022 15:54:30 +0000 (16:54 +0100)]
Add diagnostic: "note: OpenACC 'kernels' decomposition: variable '[...]' declared in block made addressable" [PR100280]
Follow-up to commit 9b32c1669aad5459dd053424f9967011348add83
"OpenACC 'kernels' decomposition: Mark variables used in
synthesized data clauses as addressable [PR100280]".
Jakub Jelinek [Fri, 4 Mar 2022 08:53:36 +0000 (09:53 +0100)]
tree: Fix up warn_deprecated_use [PR104627]
The r12-7287-g1b71bc7c8b18bd1b change improved the -Wdeprecated
warning for C++, but regressed it for C, in particular in
gcc.dg/deprecated.c testcase we now report a type that actually isn't
deprecated as deprecated instead of the one that is deprecated.
The following change tries to find the middle ground between what
we used to do before and what r12-7287 change does.
If TYPE_STUB_DECL (node) is non-NULL (that is what happens with
those C tests), then it will do what it used to do before (just smarter,
there is no need to lookup_attribute when it is called again a few lines
below this), if it is NULL, it will try
TYPE_STUB_DECL (TYPE_MAIN_VARIANT (node)) - what the deprecated-16.C
test needs.
2022-03-04 Jakub Jelinek <jakub@redhat.com>
PR c/104627
* tree.cc (warn_deprecated_use): For types prefer to use node
and only use TYPE_MAIN_VARIANT (node) if TYPE_STUB_DECL (node) is
NULL.