That commit fixed an issue with omp_get_device_num() on gcn/nvptx that
resulted in having always the value 0.
This commit modifies the tests to iterate over all devices such that on a
multi-nonhost-device system it had detected that always-zero issue.
libgomp/ChangeLog:
* testsuite/libgomp.c-c++-common/target-45.c: Iterate over all devices.
* testsuite/libgomp.fortran/target10.f90: Likewise.
Richard Biener [Tue, 4 Jan 2022 10:59:35 +0000 (11:59 +0100)]
tree-optimization/103690 - not up-to-date SSA and PRE DCE
This avoids running simple_dce_from_worklist on partially not up-to-date
SSA form (in unreachable code regions) by scheduling CFG cleanup
manually as is done anyway when tail-merging runs.
2022-01-04 Richard Biener <rguenther@suse.de>
PR tree-optimization/103690
* tree-pass.h (tail_merge_optimize): Adjust.
* tree-ssa-tail-merge.c (tail_merge_optimize): Pass in whether
to re-split critical edges, move CFG cleanup ...
* tree-ssa-pre.c (pass_pre::execute): ... here, before
simple_dce_from_worklist and delay freeing inserted_exprs from
...
(fini_pre): .. here.
Roger Sayle [Wed, 15 Dec 2021 14:09:48 +0000 (15:09 +0100)]
nvptx: Transition nvptx backend to STORE_FLAG_VALUE = 1
This patch to the nvptx backend changes the backend's STORE_FLAG_VALUE
from -1 to 1, by using BImode predicates and selp instructions, instead
of set instructions (almost always followed by integer negation).
Historically, it was reasonable (through rare) for backends to use -1
for representing true during the RTL passes. However with tree-ssa,
GCC now emits lots of code that reads and writes _Bool values, requiring
STORE_FLAG_VALUE=-1 targets to frequently convert 0/-1 pseudos to 0/1
pseudos using integer negation. Unfortunately, this process prevents
or complicates many optimizations (negate isn't associative with logical
AND, OR and XOR, and interferes with range/vrp/nonzerobits bounds etc.).
The impact of this is that for a relatively simple logical expression
like "return (x==21) && (y==69);", the nvptx backend currently generates:
This patch tweaks nvptx to generate 0/1 values instead, requiring the
same number of instructions, using (BImode) predicate registers and selp
instructions so as to now generate the almost identical:
The hidden benefit is that this sequence can (in theory) be optimized
by the RTL passes to eventually generate a much shorter sequence using
an and.pred instruction (just like Nvidia's nvcc compiler).
This patch has been tested nvptx-none with a "make" and "make -k check"
(including newlib) hosted on x86_64-pc-linux-gnu with no new failures.
gcc/ChangeLog:
* config/nvptx/nvptx.h (STORE_FLAG_VALUE): Change to 1.
* config/nvptx/nvptx.md (movbi): Use P1 constraint for true.
(setcc_from_bi): Remove SImode specific pattern.
(setcc<mode>_from_bi): Provide more general HSDIM pattern.
(extendbi<mode>2, zeroextendbi<mode>2): Provide instructions
for sign- and zero-extending BImode predicates to integers.
(setcc_int<mode>): Remove previous (-1-based) instructions.
(cstorebi4): Remove BImode to SImode specific expander.
(cstore<mode>4): Fix indentation. Expand using setccsi_from_bi.
(cstore<mode>4): For both integer and floating point modes.
Olivier Hainque [Tue, 14 Jan 2020 10:25:35 +0000 (10:25 +0000)]
Adjust VxWorks fixincludes hack for mkdir to work for C++
For VxWorks, replace an attempt at providing a posix API for
mkdir via macro by a varargs prototype, which works better for
C++ references like std::mkdir(arg1, arg2).
2021-12-16 Olivier Hainque <hainque@adacore.com>
fixincludes/
* inclhack.def (vxworks_posix_mkdir): Refine to expose a
varargs interface.
* tests/base/sys/stat.h: Update expected results.
* fixincl.x: Regenerate.
Olivier Hainque [Mon, 20 Dec 2021 17:47:24 +0000 (17:47 +0000)]
Register --sysroot in the driver switches table
This change adjusts the processing of --sysroot to save the option in the
internal "switches" array, which lets self-specs test for it and provide a
default value possibly dependent on environment variables, as in
Chung-Lin Tang [Tue, 4 Jan 2022 09:26:23 +0000 (17:26 +0800)]
libgomp: Fix GOMP_DEVICE_NUM_VAR stringification during offload image load
In the patch that implemented omp_get_device_num(), there was an error where
the stringification of GOMP_DEVICE_NUM_VAR, which is the macro expanding to
the actual symbol used, was erroneously using the STRINGX() macro in the
libgomp offload image symbol search, and expansion of the variable name
string through the additional layer of preprocessor symbol was not properly
achieved.
This patch fixes this by changing to properly use XSTRING(), also from
include/symcat.h.
libgomp/ChangeLog:
* plugin/plugin-gcn.c (GOMP_OFFLOAD_load_image): Change uses of STRINGX
into XSTRING when looking for GOMP_DEVICE_NUM_VAR in offload image.
* plugin/plugin-nvptx.c (GOMP_OFFLOAD_load_image): Likewise.
Richard Biener [Tue, 4 Jan 2022 09:12:47 +0000 (10:12 +0100)]
tree-optimization/103864 - SLP reduction of reductions with conversions
This generalizes the fix for PR103544 to also cover reductions that
are not reduction chains and does not consider reductions wrapped in
sign conversions for SLP reduction handling.
2022-01-04 Richard Biener <rguenther@suse.de>
PR tree-optimization/103864
PR tree-optimization/103544
* tree-vect-slp.c (vect_analyze_slp_instance): Exclude
reductions wrapped in conversions from SLP handling.
(vect_analyze_slp): Revert PR103544 change.
On Thu, Dec 30, 2021 at 04:08:25AM -0600, Segher Boessenkool wrote:
> > The following simple patch makes sure we call can_get_prologue even after
> > the last former iteration when vec is already empty and only break from
> > the loop afterwards (and only if the updating of pro done because of
> > !can_get_prologue didn't push anything into vec again).
During the development of the above patch I've noticed that in many cases
we call can_get_prologue often on the same pro again and again and again,
we can have many basic blocks pushed into vec and if most of those don't
require pro updates, i.e.
basic_block bb = vec.pop ();
if (!can_dup_for_shrink_wrapping (bb, pro, max_grow_size))
while (!dominated_by_p (CDI_DOMINATORS, bb, pro))
isn't true, then pro is can_get_prologue checked for each bb in the vec.
The following simple patch just remembers which bb we've verified already
and verifies again only when pro changes. Most of the patch is just
reindentation.
2022-01-04 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/103860
* shrink-wrap.c (try_shrink_wrapping): Don't call can_get_prologue
uselessly for blocks for which it has been called already.
Chung-Lin Tang [Tue, 4 Jan 2022 07:37:15 +0000 (15:37 +0800)]
openmp: Fix ICE in gimplify_omp_affinity [PR103643]
After the PR90030 patch, which removes the universal casting of all Fortran
array pointers to 'c_char*', a Fortran descriptor based array passed into an
affinity() clause now looks like:
The 'integer(kind=4)[0:]' incomplete type appears to be causing ICE during
gimplify_expr() due to 'is_gimple_val, fb_rvalue'. The ICE appears to be fixed
just by adjusting to 'is_gimple_lvalue, fb_lvalue'. Considering the use of the
affinity() clause, which should be specifying the location of a particular
object in memory, this probably makes sense.
gcc/ChangeLog:
PR middle-end/103643
* gimplify.c (gimplify_omp_affinity): Adjust gimplify_expr of entire
OMP_CLAUSE_DECL to use 'is_gimple_lvalue, fb_lvalue'
Andrew Pinski [Tue, 4 Jan 2022 02:53:47 +0000 (02:53 +0000)]
[COMMITTED] c++: [PR90782] Add testcase
This testcase was fixed by r12-1744-g3eecc1 as it make
sense it fixed a few other class deduction issues.
So I thought I would add a testcase for this PR and close
it as fixed.
Marek Polacek [Fri, 17 Dec 2021 19:34:12 +0000 (14:34 -0500)]
c-family: Have -Wformat-diag accept "decl-specifier" [PR103758]
I'm tired of seeing
cp/parser.c:15923:55: warning: misspelled term 'decl' in format; use 'declaration' instead [-Wformat-diag]
cp/parser.c:15925:57: warning: misspelled term 'decl' in format; use 'declaration' instead [-Wformat-diag]
every time I compile cp/parser.c, which happens...a lot. I'd like my
compilation to be free of warnings, otherwise I'm going to miss some
important ones.
"decl-specifiers" is a C++ grammar term; it is not actual code, so
should not be wrapped with %< %>. I hope we can accept it as an exception
in check_tokens.
It was surrounded by %< %> in cp_parser_decl_specifier_seq, so fix that.
Middle end tries to generate V4QImode moves to implement V2QImode inserts
and calls emit_move_multi_word when V4QImode moves are unavailable, as is
the case with 32-bit vector moves, constrainted with TARGET_SSE2.
However, this triggers
gcc_assert (mode_size >= UNITS_PER_WORD);
in emit_move_multi_word, since mode_size of V4QImode operand is less than
UNITS_PER_WORD of 64-bit targets.
The patch unconditionally enables 32-bit vector moves to match 16-bit
vector moves. This also enables implementation of 32-bit vector logic
operations with GPR in a follow-up patch.
Andrew Pinski [Mon, 3 Jan 2022 01:40:34 +0000 (01:40 +0000)]
Revamp documentation for _Complex types extension
While cleaning up the bug database, I noticed there was a request
to improve the documentation of the _Complex type extensions.
So I rewrote part of the documentation to make things clearer on
__real/__imag and even added documentation about casts between
the scalar and the complex type.
I moved the documentation of __builtin_complex under this section
too because it makes more sense than having it in the other
built-in section and reference it.
OK? Built make info and make html and checked out the results to
make sure the tables look decent.
gcc/ChangeLog:
PR c/33193
* doc/extend.texi: Extend the documentation about Complex
types for casting and also rewrite the __real__/__imag__
expression portion to use tables.
Move __builtin_complex to the Complex type section.
Fortran: Fix array copy-in/copy-out for BIND(C) functions [PR103390]
The Fortran front end was generating invalid code for the array
copy-out after a call to a BIND(C) function for a dummy with the
CONTIGUOUS attribute when the actual argument was a call to the SHAPE
intrinsic or other array expressions that are not lvalues. It was
also generating code to evaluate the argument expression multiple
times on copy-in. This patch teaches it to recognize that a copy is
not needed in these cases.
gcc/fortran/
* expr.c (gfc_is_simply_contiguous): Make it smarter about
function calls.
* trans-expr.c (gfc_conv_gfc_desc_to_cfi_desc): Do not generate
copy loops for array expressions that are not "variables" (lvalues).
Jakub Jelinek [Mon, 3 Jan 2022 13:02:23 +0000 (14:02 +0100)]
i386, fab: Optimize __atomic_{add,sub,and,or,xor}_fetch (x, y, z) {==,!=,<,<=,>,>=} 0 [PR98737]
On Wed, Jan 27, 2021 at 12:27:13PM +0100, Ulrich Drepper via Gcc-patches wrote:
> On 1/27/21 11:37 AM, Jakub Jelinek wrote:
> > Would equality comparison against 0 handle the most common cases.
> >
> > The user can write it as
> > __atomic_sub_fetch (x, y, z) == 0
> > or
> > __atomic_fetch_sub (x, y, z) - y == 0
> > thouch, so the expansion code would need to be able to cope with both.
>
> Please also keep !=0, <0, <=0, >0, and >=0 in mind. They all can be
> useful and can be handled with the flags.
<= 0 and > 0 don't really work well with lock {add,sub,inc,dec}, x86 doesn't
have comparisons that would look solely at both SF and ZF and not at other
flags (and emitting two separate conditional jumps or two setcc insns and
oring them together looks awful).
But the rest can work.
Here is a patch that adds internal functions and optabs for these,
recognizes them at the same spot as e.g. .ATOMIC_BIT_TEST_AND* internal
functions (fold all builtins pass) and expands them appropriately (or for
the <= 0 and > 0 cases of +/- FAILs and let's middle-end fall back).
So far I have handled just the op_fetch builtins, IMHO instead of handling
also __atomic_fetch_sub (x, y, z) - y == 0 etc. we should canonicalize
__atomic_fetch_sub (x, y, z) - y to __atomic_sub_fetch (x, y, z) (and vice
versa).
2022-01-03 Jakub Jelinek <jakub@redhat.com>
PR target/98737
* internal-fn.def (ATOMIC_ADD_FETCH_CMP_0, ATOMIC_SUB_FETCH_CMP_0,
ATOMIC_AND_FETCH_CMP_0, ATOMIC_OR_FETCH_CMP_0, ATOMIC_XOR_FETCH_CMP_0):
New internal fns.
* internal-fn.h (ATOMIC_OP_FETCH_CMP_0_EQ, ATOMIC_OP_FETCH_CMP_0_NE,
ATOMIC_OP_FETCH_CMP_0_LT, ATOMIC_OP_FETCH_CMP_0_LE,
ATOMIC_OP_FETCH_CMP_0_GT, ATOMIC_OP_FETCH_CMP_0_GE): New enumerators.
* internal-fn.c (expand_ATOMIC_ADD_FETCH_CMP_0,
expand_ATOMIC_SUB_FETCH_CMP_0, expand_ATOMIC_AND_FETCH_CMP_0,
expand_ATOMIC_OR_FETCH_CMP_0, expand_ATOMIC_XOR_FETCH_CMP_0): New
functions.
* optabs.def (atomic_add_fetch_cmp_0_optab,
atomic_sub_fetch_cmp_0_optab, atomic_and_fetch_cmp_0_optab,
atomic_or_fetch_cmp_0_optab, atomic_xor_fetch_cmp_0_optab): New
direct optabs.
* builtins.h (expand_ifn_atomic_op_fetch_cmp_0): Declare.
* builtins.c (expand_ifn_atomic_op_fetch_cmp_0): New function.
* tree-ssa-ccp.c: Include internal-fn.h.
(optimize_atomic_bit_test_and): Add . before internal fn call
in function comment. Change return type from void to bool and
return true only if successfully replaced.
(optimize_atomic_op_fetch_cmp_0): New function.
(pass_fold_builtins::execute): Use optimize_atomic_op_fetch_cmp_0
for BUILT_IN_ATOMIC_{ADD,SUB,AND,OR,XOR}_FETCH_{1,2,4,8,16} and
BUILT_IN_SYNC_{ADD,SUB,AND,OR,XOR}_AND_FETCH_{1,2,4,8,16},
for *XOR* ones only if optimize_atomic_bit_test_and failed.
* config/i386/sync.md (atomic_<plusminus_mnemonic>_fetch_cmp_0<mode>,
atomic_<logic>_fetch_cmp_0<mode>): New define_expand patterns.
(atomic_add_fetch_cmp_0<mode>_1, atomic_sub_fetch_cmp_0<mode>_1,
atomic_<logic>_fetch_cmp_0<mode>_1): New define_insn patterns.
* doc/md.texi (atomic_add_fetch_cmp_0<mode>,
atomic_sub_fetch_cmp_0<mode>, atomic_and_fetch_cmp_0<mode>,
atomic_or_fetch_cmp_0<mode>, atomic_xor_fetch_cmp_0<mode>): Document
new named patterns.
* gcc.target/i386/pr98737-1.c: New test.
* gcc.target/i386/pr98737-2.c: New test.
* gcc.target/i386/pr98737-3.c: New test.
* gcc.target/i386/pr98737-4.c: New test.
* gcc.target/i386/pr98737-5.c: New test.
* gcc.target/i386/pr98737-6.c: New test.
* gcc.target/i386/pr98737-7.c: New test.
Richard Biener [Mon, 3 Jan 2022 11:55:45 +0000 (12:55 +0100)]
middle-end/103851 - ensure SSA names are released during OMP lowering
This makes sure to release moved & remapped SSA names during OMP
outlining which happens before going into SSA but with SSA names
created by gimplification around.
Jakub Jelinek [Mon, 3 Jan 2022 12:47:53 +0000 (13:47 +0100)]
symtab: Fold &a == &b to 0 if folding_initializer [PR94716]
On Thu, Dec 09, 2021 at 06:09:12PM -0500, Jason Merrill wrote:
> For the more general comparison of decls like your a != b example above I
> think clang is in the right; in manifestly constant-evaluated context
> (folding_initializer) we should return that they are unequal and prevent a
> later alias declaration, like we do for comparison to 0 in
> maybe_nonzero_address. It's possible that this gives a wrong answer based
> on something in another translation unit, but that's unlikely, and taking
> that chance seems better than rejecting code that needs a constant answer.
I agree. This is an incremental patch to do that.
2022-01-03 Jakub Jelinek <jakub@redhat.com>
PR c++/94716
gcc/
* symtab.c: Include fold-const.h.
(symtab_node::equal_address_to): If folding_initializer is true,
handle it like memory_accessed. Simplify.
gcc/testsuite/
* gcc.dg/init-compare-1.c: New test.
* g++.dg/cpp0x/constexpr-compare1.C: New test.
* g++.dg/cpp1y/constexpr-94716.C: New test.
* g++.dg/cpp1z/constexpr-compare1.C: New test.
- Import latest changes to mainline.
- Fix bad format specifiers in front-end errors (PR103840).
- Refactoring of some leaf modules to the dmd/root package.
- Updating copyright notice dates and urls.
Phobos changes:
- Import latest changes to mainline.
gcc/d/ChangeLog:
PR d/103840
* dmd/MERGE: Merge upstream dmd 001bfd97b.
* Make-lang.in (D_FRONTEND_OBJS): Rename d/complex.o to
d/root-complex.o, and d/utf.o to d/root/utf.o.
Jakub Jelinek [Mon, 3 Jan 2022 10:21:00 +0000 (11:21 +0100)]
c++: Support &typeid(x) == &typeid(y) and typeid(x) == typeid(y) in constant evaluation [PR103600]
If the tinfo vars are emitted in the current TU, they are emitted at the end
of the compilation, and for some types they are exported from
libstdc++/libsupc++ and not emitted in the current TU at all.
The following patch allows constant folding of comparisons of typeid
addresses and makes it possible to implement P1328R1 - making type_info
operator== constexpr (Jonathan has a patch for that).
As mentioned in the PR, the varpool/middle-end code is trying to be
conservative with address comparisons of different vars if those vars
don't bind locally, because of possible aliases in other TUs etc.
and so while match.pd folds &typeid(int) == &typeid(int) because
it is equality comparison with the same operands, for different typeids
it doesn't fold it.
On Wed, Dec 08, 2021 at 08:53:03AM -0500, Jason Merrill wrote:
> Would it make sense to assume that DECL_ARTIFICIAL variables can't be
> aliases? If not, could we have some way of marking a variable as
> non-aliasing, perhaps an attribute?
I think DECL_ARTIFICIAL vars generally can overlap.
The following patch adds a GCC internal attribute "non overlapping"
and uses it in symtab_node::equal_address_to.
Not sure what plans has Honza in that area and whether it would be useful
to make the attribute public and let users assert that some variable will
never overlap with other variables, won't have aliases etc.
> During constant evaluation, the operator== could compare the type_info
> address instead of the __name address, reducing this to the previous
> problem.
Ah, indeed, good idea. FYI, clang++ seems to constant fold
&typeid(x) != &typeid(y) already, so Jonathan could use it even for
clang++ in the constexpr operator==. But it folds even
extern int &a, &b;
constexpr bool c = &a != &b;
regardless of whether some other TU has
int a;
int b __attribute__((alias (a));
or not.
2022-01-03 Jakub Jelinek <jakub@redhat.com>
PR c++/103600
gcc/
* symtab.c (symtab_node::equal_address_to): Return 0 if one of
VAR_DECLs has "non overlapping" attribute and rs1 != rs2.
gcc/c-family/
* c-attribs.c (handle_non_overlapping_attribute): New function.
(c_common_attribute_table): Add "non overlapping" attribute.
gcc/cp/
* rtti.c (get_tinfo_decl_direct): Add "non overlapping" attribute
to DECL_TINFO_P VAR_DECLs.
gcc/testsuite/
* g++.dg/cpp0x/constexpr-typeid2.C: New test.
This patch adds basic V2QImode infrastructure and V2QImode arithmetic
operations (plus, minus and neg). The patched compiler can emit SSE
vectorized QImode operations (e.g. PADDB) with partial QImode vector,
and also synthesized double HI/LO QImode operations with integer registers.
The testcase:
typedef char __v2qi __attribute__ ((__vector_size__ (2)));
__v2qi plus (__v2qi a, __v2qi b) { return a + b; };
Jason Merrill [Sat, 1 Jan 2022 18:07:59 +0000 (13:07 -0500)]
c++: fix array cleanup with throwing temp dtor
While working on PR66139 I noticed that if the destructor of a temporary
created during array initialization throws, we were failing to destroy the
last array element constructed. Throwing destructors are rare since C++11,
but this should be fixed.
gcc/cp/ChangeLog:
* init.c (build_vec_init): Append the decrement to elt_init.
Jason Merrill [Thu, 30 Dec 2021 05:10:57 +0000 (00:10 -0500)]
c++: don't wrap cleanups that can't throw
Since C++11, the vast majority of destructors are noexcept, so
wrap_temporary_cleanups adds a bunch of useless TRY_CATCH_EXPR to be removed
later in the optimizers. It's simple to avoid adding them in the first
place.
gcc/cp/ChangeLog:
* decl.c (wrap_cleanups_r): Don't wrap if noexcept.
Fixincludes: Handle __FLT_EVAL_METHOD__ == 16 on darwin
The darwin system headers error out on __FLT_EVAL_METHOD__ == 16, which
occurs when the compiler is called with -mavx512fp16 on i386. Allow this
value to proceed past the check (nothing else depends on it in the
system headers).
fixincludes/ChangeLog:
* inclhack.def: Add new fix on darwin.
* fixincl.x: Regenerate.
* tests/base/math.h: Regenerate.
On Wed, Dec 29, 2021 at 03:54:03PM -0800, Ian Lance Taylor via Gcc-patches wrote:
> PR go/103847
> * godump.c (go_force_record_alignment): Name the alignment
> field "_".
Jakub Jelinek [Sat, 1 Jan 2022 05:29:36 +0000 (06:29 +0100)]
objc: Fix handling of break stmt inside of switch inside of ObjC foreach [PR103639]
The r11-3302-g3696a50beeb73f changes broke the following ObjC testcase.
in_statement is either 0 (not in a looping statement), various IN_* flags
for various kinds of looping statements (or OpenMP structured blocks) or
those flags ored with IN_SWITCH_STMT when a switch appears inside of those
contexts. This is because break binds to switch in that last case, but
continue binds to the looping construct in that case.
The c_finish_bc_stmt function performs diagnostics on incorrect
break/continue uses and then checks if in_statement & IN_OBJC_FOREACH
and in that case jumps to the label provided by the caller, otherwise
emits a BREAK_STMT or CONTINUE_STMT. This is incorrect if we have
ObjC foreach with switch nested in it and break inside of that,
in_statement in that case is IN_OBJC_FOREACH | IN_SWITCH_STMT and
is_break is true. We want to handle it like other breaks inside of
switch, i.e. emit a BREAK_STMT.
The following patch fixes that.
2022-01-01 Jakub Jelinek <jakub@redhat.com>
PR objc/103639
* c-typeck.c (c_finish_bc_stmt): For break inside of switch inside of
ObjC foreach, emit normal BREAK_STMT rather than goto to label.
Iain Sandoe [Fri, 31 Dec 2021 11:52:22 +0000 (11:52 +0000)]
libgfortran: Fix bootstrap on targets without static_assert macro.
Although we build the library with GCC which is known to support
_Static_assert this might be done on a system without the macro
mapping static_assert to the compiler keyword.
The use of static_assert introduced with r12-6126-g3430132f3e82
causes bootstrap to fail on such targets, fixed by using the keyword
directly.
Jakub Jelinek [Thu, 30 Dec 2021 21:25:34 +0000 (22:25 +0100)]
regrename: Fix -fcompare-debug issue in find_rename_reg [PR103756]
The r12-5978 change caused a -fcompare-debug issue, because without
-g a chain might start with a noop move, but with -g there could be
one or more DEBUG_INSNs in the chain before the noop move and so
regrename could make different decisions between -g and -g0.
Note, I must say I don't really understand the original change much,
if we want to make sure the noop moves are removed, couldn't regrename
during building of those du chains simply remove the noop moves instead?
2021-12-30 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/103756
* regrename.c (find_rename_reg): Test noop_move_p on the first
non-debug insn in the chain rather than on the first insn.
Jakub Jelinek [Thu, 30 Dec 2021 21:23:58 +0000 (22:23 +0100)]
libcpp: Fix up ##__VA_OPT__ handling [PR89971]
In the following testcase we incorrectly error about pasting / token
with padding token (which is a result of __VA_OPT__); instead we should
like e.g. for ##arg where arg is empty macro argument clear PASTE_LEFT
flag of the previous token if __VA_OPT__ doesn't add any real tokens
(which can happen either because the macro doesn't have any tokens
passed to ... (i.e. __VA_ARGS__ expands to empty) or when __VA_OPT__
doesn't have any tokens in between ()s).
2021-12-30 Jakub Jelinek <jakub@redhat.com>
PR preprocessor/89971
libcpp/
* macro.c (replace_args): For ##__VA_OPT__, if __VA_OPT__ expands
to no tokens at all, drop PASTE_LEFT flag from the previous token.
gcc/testsuite/
* c-c++-common/cpp/va-opt-9.c: New test.
In this example, gcc creates clones for the FOO function, each matching
one of the specified targets. When inspecting the binary, nm (and other
libiberty-based tools, including gdb) fails to demangle the symbol names
if the clone identifier contains numbers.
Form my understanding of the mangling convention[1], clone names are
part of vendor-specific suffixes and do not have rule preventing them
from containing digits.
This commit proposes to fix the demangling. With this commit (ported to
binutils), nm gives the following output:
* cp-demangle.c (d_clone_suffix): Support digits in clone tag
names.
* testsuite/demangle-expected: Check demangling of clone symbols
with digits in name.
Jakub Jelinek [Thu, 30 Dec 2021 13:35:06 +0000 (14:35 +0100)]
emit-rtl: Fix a -fcompare-debug issue due to var-tracking [PR103808]
We get a -fcompare-debug FAIL on the following testcase. The problem is
that during cprop we get when a TImode pseudo holding x is being
constructed:
(debug_insn 111 59 103 7 (var_location:TI D#2 (clobber (const_int 0 [0]))) -1
(nil))
(insn 103 111 110 7 (clobber (reg/v:TI 89 [ x ])) "pr103808.c":8:9 -1
(nil))
(debug_insn 110 103 104 7 (var_location:TI D#2 (subreg:TI (reg:DI 111 [ x ]) 0)) -1
(nil))
(insn 104 110 109 7 (set (subreg:DI (reg/v:TI 89 [ x ]) 0)
(reg:DI 111 [ x ])) "pr103808.c":8:9 80 {*movdi_internal}
(expr_list:REG_DEAD (reg:DI 111 [ x ])
(nil)))
Now, during RA that paradoxical subreg in a debug insn obviously can't
affect where pseudo 111 is allocated and RA puts it into the bp register,
so we have:
(debug_insn 110 111 109 4 (var_location:TI D#2 (reg:TI 6 bp [orig:111 x ] [111])) -1
(nil))
Now, during var-tracking when we for:
(debug_insn 25 23 26 3 (var_location:TI x (concatn/v:TI [
(reg:DI 6 bp [orig:111 x ] [111])
(subreg:DI (debug_expr:TI D#2) 8)
])) "pr103808.c":8:9 -1
(nil))
try to simplify the highpart subreg of bp, gen_rtx_REG_offset is called in:
if (HARD_REGISTER_NUM_P (final_regno))
{
rtx x = gen_rtx_REG_offset (op, outermode, final_regno,
subreg_memory_offset (outermode,
innermode, byte));
and that unfortunately sets REG_ATTRS on stack_pointer_rtx, because
gen_rtx_REG_offset uses gen_rtx_REG which for Pmode STACK_POINTER_REGNUM
returns stack_pointer_rtx rather than newly created register.
The clobbering of REG_ATTRS on the shared stack_pointer_rtx then shows up
in the dumps as (reg/f:DI 7 sp [ x+8 ]) instead of (reg/f:DI 7 sp)
that shows up without var-tracking.
Clobbering of REG_ATTRS on the shared *_pointer_rtx looks just wrong.
So, IMHO either simplify_gen_subreg -> gen_rtx_REG_offset should call
gen_raw_REG to make sure we get a new non-shared REG we can set REG_ATTRS
on, or we should make sure that we don't overwrite the REG_ATTRS on the
shared REGs (but then simplify_gen_subreg shouldn't try to overwrite
ORIGINAL_REGNO on those either).
For non-DEBUG_INSNs, I'd hope this never happens, the RA shouldn't allocate
multi-word regs overlapping with stack pointer, hard frame pointer etc.
2021-12-30 Jakub Jelinek <jakub@redhat.com>
PR debug/103808
* emit-rtl.c (gen_rtx_REG_offset): Use gen_raw_REG instead of
gen_rtx_REG.
Jakub Jelinek [Thu, 30 Dec 2021 13:25:19 +0000 (14:25 +0100)]
c-family: Use BULTINS_LOCATION for predefined macros changed upon optimize or target pragmas [PR103012]
The following testcases ICE when an optimize or target pragma
is followed by a long line (4096+ chars).
This is because on such long lines we can't use columns anymore,
but the cpp_define calls performed by c_cpp_builtins_optimize_pragma
or from the backend hooks for target pragma are done on temporary
buffers and expect to get columns from whatever line they appear on
(which happens to be the long line after optimize/target pragma),
and we run into:
#0 fancy_abort (file=0x3abec67 "../../libcpp/line-map.c", line=502, function=0x3abecfc "linemap_add") at ../../gcc/diagnostic.c:1986
#1 0x0000000002e7c335 in linemap_add (set=0x7ffff7fca000, reason=LC_RENAME, sysp=0, to_file=0x41287a0 "pr103012.i", to_line=3) at ../../libcpp/line-map.c:502
#2 0x0000000002e7cc24 in linemap_line_start (set=0x7ffff7fca000, to_line=3, max_column_hint=128) at ../../libcpp/line-map.c:827
#3 0x0000000002e7ce2b in linemap_position_for_column (set=0x7ffff7fca000, to_column=1) at ../../libcpp/line-map.c:898
#4 0x0000000002e771f9 in _cpp_lex_direct (pfile=0x40c3b60) at ../../libcpp/lex.c:3592
#5 0x0000000002e76c3e in _cpp_lex_token (pfile=0x40c3b60) at ../../libcpp/lex.c:3394
#6 0x0000000002e610ef in lex_macro_node (pfile=0x40c3b60, is_def_or_undef=true) at ../../libcpp/directives.c:601
#7 0x0000000002e61226 in do_define (pfile=0x40c3b60) at ../../libcpp/directives.c:639
#8 0x0000000002e610b2 in run_directive (pfile=0x40c3b60, dir_no=0, buf=0x7fffffffd430 "__OPTIMIZE__ 1\n", count=14) at ../../libcpp/directives.c:589
#9 0x0000000002e650c1 in cpp_define (pfile=0x40c3b60, str=0x2f784d1 "__OPTIMIZE__") at ../../libcpp/directives.c:2513
#10 0x0000000002e65100 in cpp_define_unused (pfile=0x40c3b60, str=0x2f784d1 "__OPTIMIZE__") at ../../libcpp/directives.c:2522
#11 0x0000000000f50685 in c_cpp_builtins_optimize_pragma (pfile=0x40c3b60, prev_tree=<optimization_node 0x7fffea042000>, cur_tree=<optimization_node 0x7fffea042020>)
at ../../gcc/c-family/c-cppbuiltin.c:600
assertion that LC_RENAME doesn't happen first.
I think the right fix is emit those predefined macros upon
optimize/target pragmas with BUILTINS_LOCATION, like we already do
for those macros at the start of the TU, they don't appear in columns
of the next line after it. Another possibility would be to force them
at the location of the pragma.
Jakub Jelinek [Thu, 30 Dec 2021 13:23:18 +0000 (14:23 +0100)]
shrink-wrapping: Fix up prologue block discovery [PR103860]
The following testcase is miscompiled, because a prologue which
contains subq $8, %rsp instruction is emitted at the start of
a basic block which contains conditional jump that depends on
flags register set in an earlier basic block, the prologue instruction
then clobbers those flags.
Normally this case is checked by can_get_prologue predicate, but this
is done only at the start of the loop. If we update pro later in the
loop (because some bb shouldn't be duplicated) and then don't push
anything further into vec and the vec is already empty (this can happen
when the new pro is already in bb_with bitmask and either has no successors
(that is the case in the testcase where that bb ends with a trap) or
all the successors are already in bb_with, then the loop doesn't iterate
further and can_get_prologue will not be checked.
The following simple patch makes sure we call can_get_prologue even after
the last former iteration when vec is already empty and only break from
the loop afterwards (and only if the updating of pro done because of
!can_get_prologue didn't push anything into vec again).
2021-12-30 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/103860
* shrink-wrap.c (try_shrink_wrapping): Make sure can_get_prologue is
called on pro even if nothing further is pushed into vec.
Jakub Jelinek [Wed, 29 Dec 2021 20:46:21 +0000 (21:46 +0100)]
tree-ssa-dce: Fix up -fcompare-debug failures in make_forwarders_with_degenerate_phis [PR103742]
make_forwarders_with_degenerate_phis causes a -fcompare-debug failure on the
following testcase.
The problem is that on:
# iftmp.4_8 = PHI <&D.2582(6), &D.2583(4), &D.2582(7), &D.2583(5)>
the exact DECL_UIDs are different between -g and -g0 (which is ok, with -g
the decls can have larger gaps in between the uids), which means
iterative_hash_expr is different and because there are 2 pairs of edges
with matching phi arguments, the function processes them in different
orders.
The following patch fixes it by using the iterative_hash_expr order
only to determine which arguments are the same, then replaces the hashes
with the minimum dest_idx in the set of matching arguments and qsorts
again (which makes it stable for -fcompare-debug) and only splits edges etc.
on that stable order.
As a small optimization, if no arguments are equal, it doesn't do the
second qsort and continues, and if all arguments of the PHI are
constants or SSA_NAMEs (I think that is a pretty common case for many
PHIs), then it doesn't do the second qsort either, because in that case
the hash values will be stable, only computed from the constant values or
SSA_NAME_VERSIONs.
2021-12-29 Jakub Jelinek <jakub@redhat.com>
PR debug/103742
* tree-ssa-dce.c (make_forwarders_with_degenerate_phis): If any phi
argument is not CONSTANT_CLASS_P or SSA_NAME and any arguments are
equal, change second from hash value to lowest dest_idx from the
edges which have equal argument and resort to ensure -fcompare-debug
stability.
Fortran 2018 added some synonyms to the existing values, namely
IEEE_NEGATIVE_SUBNORMAL (which is the same as IEEE_NEGATIVE_DENORMAL)
and IEEE_POSITIVE_SUBNORMAL (same as IEEE_POSITIVE_DENORMAL). When they
were added to the C side, they were not kept in sync with the Fortran
part of the library. Thew new values are not used (yet), so it is
currently harmless, but better fix it.
Uros Bizjak [Wed, 29 Dec 2021 08:34:32 +0000 (09:34 +0100)]
i386: Robustify some expanders w.r.t. paradoxical SUBREGs
lowpart_subreg might fail in some cases when trying to create paradoxical
SUBREGs. Use force_reg on input operand, use new temporary output operand
and emit move into the destination afterwards.
* config/i386/sse.md (vec_pack<floatprefix>_float_<mode>):
Perform gen_avx512dq_float<floatunssuffix>v2div2sf2 into a
pseudo and emit move insn into operands[0].
(fix<fixunssuffix>_truncv2sfv2di2): Use lowpart_subreg
instead of simplify_gen_subreg.
(trunc<mode><pmov_dst_3_lower>2): Perform
gen_avx512vl_truncate<mode>v<ssescalarnum>qi2 into a
pseudo and emit move insn into operands[0].
(trunc<mode><pmov_dst_4_lower>2): Perform
gen_avx512vl_truncate<mode>v<ssescalarnum>hi2 into a
pseudo and emit move insn into operands[0].
(truncv2div2si2): Perform gen_avx512vl_truncatev2div2si2 into a
pseudo and emit move insn into operands[0].
(truncv8div8qi2): Perform gen_avx512f_truncatev8div16qi2 into a
pseudo and emit move insn into operands[0].
(<any_extend:insn>v8qiv8hi2): Use lowpart_subreg
instead of simplify_gen_subreg.
(<any_extend:insn>v8qiv8si2): Ditto.
(<any_extend:insn>v4qiv4si2): Ditto.
(<any_extend:insn>v4hiv4si2): Ditto.
(<any_extend:insn>v8qiv8di2): Ditto.
(<any_extend:insn>v4qiv4di2): Ditto.
(<any_extend:insn>v2qiv2di2): Ditto.
(<any_extend:insn>v4hiv4di2): Ditto.
(<any_extend:insn>v2hiv2di2): Ditto.
(<any_extend:insn>v2siv2di2): Ditto.
Xionghu Luo [Wed, 29 Dec 2021 01:09:14 +0000 (19:09 -0600)]
Fix ICE in lsplit when built with -O3 -fno-guess-branch-probability [PR103793]
no-guess-branch-probability option requires profile_count scaling with
initialized_p guard, use multiply instead of apply_scale, which will do
the right thing to undefined probabilities and will not cause unnecesary
roundoff errors and precision info loss.
Also merge the missed part of r12-6086 of factor out function to avoid
duplicate code.
Regression testest pass on Power and X86.
gcc/ChangeLog:
PR tree-optimization/103793
* tree-ssa-loop-split.c (fix_loop_bb_probability): New function.
(split_loop): Use multiply to scale loop1's exit probability.
(do_split_loop_on_cond): Call fix_loop_bb_probability.
gcc/testsuite/ChangeLog:
PR tree-optimization/103793
* gcc.dg/pr103793.c: New test.
Libbacktrace: Fix the use of newline in sed replacement
On non-ELF targets, the Makefile needs a newline inside the sed REPLACE
string. The way it is currently done fails with GNU Make < 4, but GCC
only requires "GNU make version 3.80 (or later)".
The portable solution is given in the autoconf manual:
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Newlines-in-Make-Rules.html
Fortran: Emit correct types for CHARACTER(C_CHAR), VALUE arguments
Make the front-end emit the right type for CHARACTER(C_CHAR), VALUE
arguments to BIND(C) procedures. They are scalar integers of C type
char, and should be emitted as such. They are not strings or arrays,
and are not promoted to C int, either.
gcc/fortran/ChangeLog:
PR fortran/103828
* trans-decl.c (generate_local_decl): Do not call
gfc_conv_scalar_char_value(), but check the type tree.
* trans-expr.c (gfc_conv_scalar_char_value): Rename to
conv_scalar_char_value, do not alter type tree.
(gfc_conv_procedure_call): Adjust call to renamed
conv_scalar_char_value() function.
* trans-types.c (gfc_sym_type): Take care of
CHARACTER(C_CHAR), VALUE arguments.
* trans.h (gfc_conv_scalar_char_value): Remove prototype.
gcc/testsuite/ChangeLog:
PR fortran/103828
* gfortran.dg/c_char_tests_3.f90: New file.
* gfortran.dg/c_char_tests_3_c.c: New file.
* gfortran.dg/c_char_tests_4.f90: New file.
* gfortran.dg/c_char_tests_5.f90: New file.
Jakub Jelinek [Tue, 28 Dec 2021 16:41:24 +0000 (17:41 +0100)]
fold-const: Fix up fold_truth_andor_1 shift handling [PR103813]
Some time ago I've changed const_binop -> wide_int_binop, so that it punts
on shifts by negative count. fold_truth_andor_1 doesn't check the results
of const_binop (?SHIFT_EXPR, ) though and assumes they will be always
non-NULL, which is no longer the case.
2021-12-28 Jakub Jelinek <jakub@redhat.com>
PR middle-end/103813
* fold-const.c (fold_truth_andor_1): Punt of const_binop LSHIFT_EXPR
or RSHIFT_EXPR returns NULL. Formatting fix.
In the following testcase we have a -fcompare-debug failure, because
can_move_invariant_reg doesn't ignore DEBUG_INSNs in its decisions.
In the testcase we have due to uninitialized variable:
loop_header
debug_insn using pseudo84
pseudo84 = invariant
insn using pseudo84
end loop
and with -g decide not to move the pseudo84 = invariant before the
loop header; in this case not resetting the debug insns might be fine.
But, we could have also:
pseudo84 = whatever
loop_header
debug_insn using pseudo84
pseudo84 = invariant
insn using pseudo84
end loop
and in that case not resetting the debug insns would result in wrong-debug.
And, we don't really have generally a good substitution on what pseudo84
contains, it could inherit various values from different paths.
So, the following patch ignores DEBUG_INSNs in the decisions, and if there
are any that previously prevented the optimization, resets them before
return true.
2021-12-28 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/103837
* loop-invariant.c (can_move_invariant_reg): Ignore DEBUG_INSNs in
the decisions whether to return false or continue and right before
returning true reset those debug insns that previously caused
returning false.
Jakub Jelinek [Tue, 28 Dec 2021 16:39:23 +0000 (17:39 +0100)]
optabs: Fix up checking for CALLs in newly added code by double-word divmod [PR103838]
These two spots are meant to punt if the newly added code contains
any CALL_INSNs, because in that case having a large sequence of insns
that also calls something is undesirable, better have one call that
is optimized in itself well.
The functions do last = get_last_insn (); before emitting any insns
(and expand_binop as the ultimate caller uses delete_insns_since if
the expansion fails), but the checks were incorrect for 2 reasons:
1) it checked not just what follows after that last insn, but also
the last insn itself; so, if the division or modulo is immediately
preceded by a CALL_INSN, then we punt; this also causes -fcompare-debug
failures if the CALL_INSN is with -g followed by one or more DEBUG_INSNs
2) if get_last_insn () is NULL (i.e. emitting into a new sequence), then
we didn't check anything
2021-12-28 Jakub Jelinek <jakub@redhat.com>
PR debug/103838
* optabs.c (expand_doubleword_mod, expand_doubleword_divmod): Only
check newly added insns for CALL_P, not the last insn of previous
code.
Martin Liska [Fri, 10 Dec 2021 08:58:52 +0000 (09:58 +0100)]
driver: Improve option diagnostics [PR103465]
It happens that options are parsed and various diagnostics happen
in finish_options. That's a proper place as the function is also called
for optimize/target attributes (pragmas). However, it is possible that
target overwrites an option from command line and so the diagnostics
does not happen. That's fixed in the patch.
- options are parsed and finish_options is called:
if (opts->x_flag_unwind_tables
&& !targetm_common.unwind_tables_default
&& opts->x_flag_reorder_blocks_and_partition
&& (ui_except == UI_SJLJ || ui_except >= UI_TARGET))
{
if (opts_set->x_flag_reorder_blocks_and_partition)
inform (loc,
"%<-freorder-blocks-and-partition%> does not support "
"unwind info on this architecture");
opts->x_flag_reorder_blocks_and_partition = 0;
opts->x_flag_reorder_blocks = 1;
}
It's not triggered because of opts->x_flag_unwind_tables is false by default, but
the option is overwritten in target:
...
if (TARGET_64BIT_P (opts->x_ix86_isa_flags))
{
if (opts->x_optimize >= 1)
SET_OPTION_IF_UNSET (opts, opts_set, flag_omit_frame_pointer,
!USE_IX86_FRAME_POINTER);
if (opts->x_flag_asynchronous_unwind_tables
&& TARGET_64BIT_MS_ABI)
SET_OPTION_IF_UNSET (opts, opts_set, flag_unwind_tables, 1);
...
PR driver/103465
gcc/ChangeLog:
* opts.c (finish_options): More part of diagnostics to ...
(diagnose_options): ... here. Call the function from both
finish_options and process_options.
* opts.h (diagnose_options): Declare.
* toplev.c (process_options): Call diagnose_options.
Jakub Jelinek [Tue, 28 Dec 2021 09:58:43 +0000 (10:58 +0100)]
i386: Fix handling of SUBREGs in divv2sf3 [PR103842]
register_operand predicate allows not just REGs, but also SUBREGs of REGs,
and for the latter lowpart_subreg might FAIL when trying to create paradoxical
SUBREG in some cases. For the input operand fixed by force_reg on it first,
for the output operand handled by always dividing into a fresh V4SFmode temporary
and emit_move_insn into the destination afterwards, that is also beneficial for
combine.
2021-12-28 Jakub Jelinek <jakub@redhat.com>
PR target/103842
* config/i386/mmx.md (divv2sf3): Use force_reg on op1. Always perform
divv4sf3 into a pseudo and emit_move_insn into operands[0].
Haochen Jiang [Fri, 24 Dec 2021 05:55:06 +0000 (13:55 +0800)]
Fix tdpbf16ps testcase
gcc/testsuite/ChangeLog:
* gcc.target/i386/amx-check.h (check_float_tile_register):
New check function for float to prevent precision loss.
* gcc.target/i386/amxbf16-dpbf16ps-2.c: Correct the type convert
and byte offset. Use the new check function.
Patrick Palka [Mon, 27 Dec 2021 14:05:17 +0000 (09:05 -0500)]
c++: hard error w/ ptr+N and incomplete type [PR103700]
In pointer_int_sum when called from a SFINAE context, we need to avoid
calling size_in_bytes_loc on an incomplete pointed-to type since this
latter function isn't SFINAE-enabled and always emits an error on such
input.
PR c++/103700
gcc/c-family/ChangeLog:
* c-common.c (pointer_int_sum): When quiet, return
error_mark_node for an incomplete pointed-to type and don't
call size_in_bytes_loc.
H.J. Lu [Sun, 19 Dec 2021 16:47:03 +0000 (08:47 -0800)]
ix86: Don't use the 'm' constraint for x86_64_general_operand
The 'm' constraint is defined with define_memory_constraint which allows
LRA to convert the operand to the form '(mem (reg X))', where X is a
base register. To prevent LRA from generating '(mem (reg X))' from a
register:
1. Add a 'BM' constraint which is similar to the 'm' constraint, but
is defined with define_constraint.
2. Add a 'm' mode attribute which is mapped to the 'm' constraint for
general_operand and the 'BM' constraint for x86_64_general_operand.
3. Replace the 'm' constraint on <general_operand> with the '<m>'
constraint.
4. Replace the 'm' constraint on x86_64_general_operand with the 'BM'
constraint.
gcc/
PR target/103762
* config/i386/constraints.md (BM): New constraint.
* config/i386/i386.md (m): New mode attribute.
Replace the 'm' constraint on <general_operand> with the '<m>'
constraint.
Replace the 'm' constraint on x86_64_general_operand with the
'BM' constraint.
gcc/testsuite/
* gcc.target/i386/pr103762-1a.c: New test.
* gcc.target/i386/pr103762-1b.c: Likewise.
* gcc.target/i386/pr103762-1c.c: Likewise.