Harald Anlauf [Sat, 17 Dec 2022 21:04:32 +0000 (22:04 +0100)]
Fortran: incorrect array bounds when bound intrinsic used in decl [PR108131]
gcc/fortran/ChangeLog:
PR fortran/108131
* array.c (match_array_element_spec): Avoid too early simplification
of matched array element specs that can lead to a misinterpretation
when used as array bounds in array declarations.
Kewen Lin [Thu, 5 Jan 2023 05:31:45 +0000 (23:31 -0600)]
rs6000: Raise error for __vector_{quad,pair} uses without MMA enabled [PR106736]
As PR106736 shows, it's unexpected to use __vector_quad and
__vector_pair types without MMA support, it would cause ICE
when expanding the corresponding assignment. We can't guard
these built-in types registering under MMA support as Peter
pointed out in that PR, because the registering is global,
it doesn't work for target pragma/attribute support with MMA
enabled. The existing verify_type_context mentioned in [2]
can help to make the diagnostics invalid built-in type uses
better, but as Richard pointed out in [4], it can't deal with
all cases. As the discussions in [1][3], this patch is to
check the invalid use of built-in types __vector_quad and
__vector_pair in mov pattern of OOmode and XOmode, on the
currently being expanded gimple assignment statement. It
still puts an assertion in else arm rather than just makes
it go through, it's to ensure we can catch any other possible
unexpected cases in time if there are.
* config/rs6000/mma.md (define_expand movoo): Call function
rs6000_opaque_type_invalid_use_p to check and emit error message for
the invalid use of opaque type.
(define_expand movxo): Likewise.
* config/rs6000/rs6000-protos.h
(rs6000_opaque_type_invalid_use_p): New function declaration.
(currently_expanding_gimple_stmt): New extern declaration.
* config/rs6000/rs6000.c (rs6000_opaque_type_invalid_use_p): New
function.
Florian Weimer [Tue, 18 Oct 2022 14:58:48 +0000 (16:58 +0200)]
libiberty: Fix C89-isms in configure tests
libiberty/
* acinclude.m4 (ac_cv_func_strncmp_works): Add missing
int return type and parameter list to the definition of main.
Include <stdlib.h> and <string.h> for prototypes.
(ac_cv_c_stack_direction): Add missing
int return type and parameter list to the definitions of
main, find_stack_direction. Include <stdlib.h> for exit
prototype.
* configure: Regenerate.
Patrick Palka [Thu, 28 Oct 2021 14:05:14 +0000 (10:05 -0400)]
c++: quadratic constexpr behavior for left-assoc logical exprs [PR102780]
In the testcase below the two left fold expressions each expand into a
constant logical expression with 1024 terms, for which potential_const_expr
takes more than a minute to return true. This happens because p_c_e_1
performs trial evaluation of the first operand of a &&/|| in order to
determine whether to consider the potentiality of the second operand.
And because the expanded expression is left-associated, this trial
evaluation causes p_c_e_1 to be quadratic in the number of terms of the
expression.
This patch fixes this quadratic behavior by making p_c_e_1 preemptively
compute potentiality of the second operand of a &&/||, and perform trial
evaluation of the first operand only if the second operand isn't
potentially constant. We must be careful to avoid emitting bogus
diagnostics during the preemptive computation; to that end, we perform
this shortcut only when tf_error is cleared, and when tf_error is set we
now first check potentiality of the whole expression quietly and replay
the check noisily for diagnostics.
Apart from fixing the quadraticness for left-associated logical exprs,
this change also reduces compile time for the libstdc++ testcase
20_util/variant/87619.cc by about 15% even though our <variant> uses
right folds instead of left folds. Likewise for the testcase in the PR,
for which compile time is reduced by 30%. The reason for these speedups
is that p_c_e_1 no longer performs expensive trial evaluation of each term
of large constant logical expressions when determining their potentiality.
PR c++/102780
PR c++/108138
gcc/cp/ChangeLog:
* constexpr.c (potential_constant_expression_1) <case TRUTH_*_EXPR>:
When tf_error isn't set, preemptively check potentiality of the
second operand before performing trial evaluation of the first
operand.
(potential_constant_expression_1): When tf_error is set, first check
potentiality quietly and return true if successful, otherwise
proceed noisily to give errors.
Sebastian Pop [Wed, 30 Nov 2022 19:45:24 +0000 (19:45 +0000)]
AArch64: Add UNSPECV_PATCHABLE_AREA [PR98776]
Currently patchable area is at the wrong place on AArch64. It is placed
immediately after function label, before .cfi_startproc. This patch
adds UNSPECV_PATCHABLE_AREA for pseudo patchable area instruction and
modifies aarch64_print_patchable_function_entry to avoid placing
patchable area before .cfi_startproc.
Iain Buclaw [Tue, 13 Dec 2022 22:46:39 +0000 (23:46 +0100)]
libphobos: Backport library and bindings fixes from mainline
D Runtime changes:
- Fix MIPS64 bindings for CRuntime_UClibc.
Phobos changes:
- Fix std.path.expandTilde erroneously raising onOutOfMemory
after failed call to getpwnam_r().
- Use GENERIC_IO on CRuntime_UClibc port of std.stdio.
libphobos/ChangeLog:
* libdruntime/core/stdc/fenv.d: Compile in MIPS uClibc bindings on
MIPS_Any targets.
* libdruntime/core/stdc/math.d: Likewise.
* libdruntime/core/sys/posix/dlfcn.d: Likewise.
* libdruntime/core/sys/posix/setjmp.d: Add MIPS64 definitions for
CRuntime_UClibc.
* libdruntime/core/sys/posix/sys/types.d: Likewise.
* src/std/path.d (expandTilde): Handle more errno codes that could be
left set by getpwnam_r.
* src/std/stdio.d: Set CRuntime_UClibc as GENERIC_IO target.
The following fixes an unintended(?) side-effect of the special
MODIFY_EXPR expression entries we add for tail-merging during VN.
We shouldn't value-number the virtual operand differently here.
PR tree-optimization/107107
* tree-ssa-sccvn.c (visit_reference_op_store): Do not
affect value-numbering when doing the tail merging
MODIFY_EXPR lookup.
Iain Buclaw [Sat, 10 Dec 2022 18:12:43 +0000 (19:12 +0100)]
d: Fix internal compiler error: in visit, at d/imports.cc:72 (PR108050)
The visitor for lowering IMPORTED_DECLs did not have an override for
dealing with importing OverloadSet symbols. This has now been
implemented in the code generator.
PR d/108050
gcc/d/ChangeLog:
* decl.cc (DeclVisitor::visit (Import *)): Handle build_import_decl
returning a TREE_LIST.
* imports.cc (ImportVisitor::visit (OverloadSet *)): New override.
liuhongt [Mon, 28 Nov 2022 01:59:47 +0000 (09:59 +0800)]
Fix unrecognizable insn due to illegal immediate_operand (const_int 255) of QImode.
For __builtin_ia32_vec_set_v16qi (a, -1, 2) with
!flag_signed_char. it's transformed to
__builtin_ia32_vec_set_v16qi (_4, 255, 2) in the gimple,
and expanded to (const_int 255) in the rtl. But for immediate_operand,
it expects (const_int 255) to be signed extended to
(const_int -1). The mismatch caused an unrecognizable insn error.
The patch converts (const_int 255) to (const_int -1) in the backend
expander.
Iain Buclaw [Fri, 11 Nov 2022 23:54:47 +0000 (00:54 +0100)]
d: Fix ICE on named continue label in an unrolled loop [PR107592]
Continue labels in an unrolled loop require a unique label per
iteration. Previously this used the Statement body node for each
unrolled iteration to generate a new entry in the label hash table.
This does not work when the continue label has an identifier, as said
named label is pointing to the outer UnrolledLoopStatement node.
What would happen is that during the lowering of `continue label', an
automatic label associated with the unrolled loop would be generated,
and a jump to that label inserted, but because it was never pushed by
the visitor for the loop itself, it subsequently never gets emitted.
To fix, correctly use the UnrolledLoopStatement as the key to look up
and store the break/continue label pair, but remove the continue label
from the value entry after every loop to force a new label to be
generated by the next call to `push_continue_label'
PR d/107592
gcc/d/ChangeLog:
* toir.cc (IRVisitor::push_unrolled_continue_label): New method.
(IRVisitor::pop_unrolled_continue_label): New method.
(IRVisitor::visit (UnrolledLoopStatement *)): Use them instead of
push_continue_label and pop_continue_label.
While most PA 2.0 instructions support both 32 and 64-bit traps
and conditions, the addi and subi instructions only support 32-bit
traps and conditions. Thus, we need to force immediate operands
to register operands on the 64-bit target and use the add/sub
instructions which can trap on 64-bit signed overflow.
2022-11-30 John David Anglin <danglin@gcc.gnu.org>
gcc/ChangeLog:
* config/pa/pa.md (addvdi3): Force operand 2 to a register.
Remove "addi,tsv,*" instruction from unamed pattern.
(subvdi3): Force operand 1 to a register.
Remove "subi,tsv" instruction from from unamed pattern.
Eric Botcazou [Fri, 25 Nov 2022 09:49:20 +0000 (10:49 +0100)]
Fix thinko in operator_bitwise_xor::op1_range
There is a thinko in the op1_range method of ranger's operator_bitwise_xor
class in a boolean context: if the result is known to be true, it may infer
that a specific operand is false without any basis.
Eric Botcazou [Tue, 22 Nov 2022 18:03:49 +0000 (19:03 +0100)]
Fix wrong array type conversion with different storage orde
When two arrays of scalars have a different storage order in Ada, the
front-end makes sure that the conversion is performed component-wise
so that each component can be reversed. So it's a little bit counter
productive that the ldist pass performs the opposite transformation
and synthesizes a memcpy/memmove in this case.
gcc/
* tree-loop-distribution.c (loop_distribution::classify_builtin_ldst):
Bail out if source and destination do not have the same storage order.
Jakub Jelinek [Mon, 21 Nov 2022 09:28:27 +0000 (10:28 +0100)]
i386: Uglify some local identifiers in *intrin.h [PR107748]
While reporting PR107748 (where is a problem with non-uglified names,
but I've left it out because it needs fixing anyway), I've noticed
various spots where identifiers in *intrin.h headers weren't uglified.
The following patch fixed those that are related to unions (I've grepped
for [a-zA-Z]\.[a-zA-Z] spots).
The reason we need those to be uglified is the same as why the arguments
of the inlines are __ prefixed and most of automatic vars in the inlines
- say a, v or u aren't part of implementation namespace and so users could
#define u whatever->something
#include <x86intrin.h>
and it should still work, as long as u is not e.g. one of the names
of the functions/macros the header provides (_mm* etc.).
2022-11-21 Jakub Jelinek <jakub@redhat.com>
PR target/107748
* config/i386/smmintrin.h (_mm_extract_ps): Uglify names of local
variables and union members.
Jakub Jelinek [Sun, 20 Nov 2022 16:42:42 +0000 (17:42 +0100)]
reg-stack: Fix a -fcompare-debug bug in reg-stack [PR107183]
As the following testcase shows, the swap_rtx_condition function
in reg-stack can result in different code generation between -g and -g0.
The function is doing the changes as it goes, so does analysis and
changes together, which makes it harder to deal with DEBUG_INSNs,
where normally analysis phase ignores them and the later phase
doesn't.
swap_rtx_condition walks instructions two different ways, one is
using next_flags_user function which stops on non-call instructions
that mention the flags register, and the other is a loop on fnstsw
where it stops on instructions mentioning it and tries to find
sahf instruction that uses it (in both cases calls stop it and so
does end of basic block).
Now both of these currently stop on DEBUG_INSNs that mention
the flags register resp. the fnstsw result register.
On success the function recurses on next flags user instruction
if still live and if the recursion failed, reverts the changes
it did too and fails.
If it were just for the next_flags_user case, the fix could be
just not doing
INSN_CODE (insn) = -1;
if (recog_memoized (insn) == -1)
fail = 1;
on DEBUG_INSNs (assuming all changes to those are fine),
swap_rtx_condition_1 just changes one comparison to a different
one. But due to the possibility of fnstsw result being used
in theory before sahf in some DEBUG_INSNs, this patch takes
a different approach. swap_rtx_condition has now a new argument
and two modes. The first mode is when debug_seen is >= 0, in this
case both next_flags_user and the loop for fnstsw -> sahf will
ignore but note DEBUG_INSNs (that mention flags register or fnstsw
result). If no such DEBUG_INSN is found during the whole call
including recursive invocations (so e.g. for -g0 but probably most
often for -g as well), it behaves as before, if it returns true
all the changes are done and nothing further needs to be done later.
If any DEBUG_INSNs are seen along the way, even when returning success
all the changes are reverted, so it just reports that the function
would be successful if DEBUG_INSNs were ignored.
In this case, compare_for_stack_reg needs to call it again in
debug_seen = -1 mode, which tells the function to update everything
including DEBUG_INSNs. For the fnstsw -> sahf case which I hope
will be very rare I just reset the DEBUG_INSNs, I don't really
know how to express it easily otherwise. For the rest
swap_rtx_condition_1 is done even on the DEBUG_INSNs.
2022-11-20 Jakub Jelinek <jakub@redhat.com>
PR target/107183
* reg-stack.c (next_flags_user): Add DEBUG_SEEN argument.
If >= 0 and a DEBUG_INSN would be otherwise returned, set
DEBUG_SEEN to 1 and ignore it.
(swap_rtx_condition): Add DEBUG_SEEN argument. In >= 0
mode only set DEBUG_SEEN to 1 if problematic DEBUG_ISNSs
were seen and revert all changes on success in that case.
Don't try to recog_memoized DEBUG_INSNs.
(compare_for_stack_reg): Adjust swap_rtx_condition caller.
If it returns true and debug_seen is 1, call swap_rtx_condition
again with debug_seen -1.
Jakub Jelinek [Tue, 15 Nov 2022 07:14:45 +0000 (08:14 +0100)]
libatomic: Handle AVX+CX16 AMD like Intel for 16b atomics [PR104688]
We got a response from AMD in
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=104688#c10
so the following patch starts treating AMD with AVX and CMPXCHG16B
ISAs like Intel by using vmovdqa for atomic load/store in libatomic.
We still don't have confirmation from Zhaoxin and VIA (anything else
with CPUs featuring AVX and CX16?).
Thomas Schwinge [Fri, 18 Nov 2022 22:57:52 +0000 (23:57 +0100)]
nvptx: In 'STARTFILE_SPEC', fix 'crt0.o' for '-mmainkernel'
A recent nvptx-tools change: commit 886a95faf66bf66a82fc0fe7d2a9fd9e9fec2820
"ld: Don't search for input files in '-L'directories" (of
<https://github.com/MentorEmbedded/nvptx-tools/pull/38>
"Match standard 'ld' "search" behavior") in GCC/nvptx target testing
generally causes linking to fail with:
error opening crt0.o
collect2: error: ld returned 1 exit status
compiler exited with status 1
Indeed per GCC '-v' output, there is an undecorated 'crt0.o' on the linker
('collect2') command line:
..., and the fix, as used by numerous other GCC targets, is to instead use
'crt0.o%s'; for '%s' means, per 'gcc/gcc.cc', "The Specs Language":
%s current argument is the name of a library or startup file of some sort.
Search for that file in a standard list of directories
and substitute the full name found.
With that, we get the expected path to 'crt0.o'.
gcc/
* config/nvptx/nvptx.h (STARTFILE_SPEC): Fix 'crt0.o' for
'-mmainkernel'.
Philipp Tomsich [Mon, 7 Nov 2022 13:22:21 +0000 (14:22 +0100)]
aarch64: Add support for Ampere-1A (-mcpu=ampere1a) CPU
This patch adds support for Ampere-1A CPU:
- recognize the name of the core and provide detection for -mcpu=native,
- updated extra_costs,
- adds a new fusion pair for (A+B+1 and A-B-1).
Ampere-1A and Ampere-1 have more timing difference than the extra
costs indicate, but these don't propagate through to the headline
items in our extra costs (e.g. the change in latency for scalar sqrt
doesn't have a corresponding table entry).
gcc/ChangeLog:
* config/aarch64/aarch64-cores.def (AARCH64_CORE): Add ampere1a.
* config/aarch64/aarch64-cost-tables.h: Add ampere1a_extra_costs.
* config/aarch64/aarch64-fusion-pairs.def (AARCH64_FUSION_PAIR):
Define a new fusion pair for A+B+1/A-B-1 (i.e., add/subtract two
registers and then +1/-1).
* config/aarch64/aarch64-tune.md: Regenerate.
* config/aarch64/aarch64.c (aarch_macro_fusion_pair_p): Implement
idiom-matcher for the new fusion pair.
* doc/invoke.texi: Add ampere1a.
H.J. Lu [Wed, 19 Oct 2022 19:53:35 +0000 (12:53 -0700)]
Always use TYPE_MODE instead of DECL_MODE for vector field
e034c5c8957 re PR target/78643 (ICE in convert_move, at expr.c:230)
fixed the case where DECL_MODE of a vector field is BLKmode and its
TYPE_MODE is a vector mode because of target attribute. Remove the
BLKmode check for the case where DECL_MODE of a vector field is a vector
mode and its TYPE_MODE isn't a vector mode because of target attribute.
gcc/
PR target/107304
* expr.c (get_inner_reference): Always use TYPE_MODE for vector
field with vector raw mode.
gcc/testsuite/
PR target/107304
* gcc.target/i386/pr107304.c: New test.
Eric Botcazou [Fri, 4 Nov 2022 10:23:12 +0000 (11:23 +0100)]
Fix recent thinko in operand_equal_p
There is a thinko in a recent improvement made to operand_equal_p where
the code just looks at operand 2 of COMPONENT_REF, if it is present, to
compare addresses. That's wrong because operand 2 contains the number of
DECL_OFFSET_ALIGN-bit-sized words so, when DECL_OFFSET_ALIGN > 8, not all
the bytes are included and some of them are in DECL_FIELD_BIT_OFFSET, see
get_inner_reference for the model computation.
In other words, you would need to compare operand 2 and DECL_OFFSET_ALIGN
and DECL_FIELD_BIT_OFFSET in this situation, but I'm not sure this is worth
the hassle in practice so the fix just removes this alternate handling.
gcc/
* fold-const.c (operand_compare::operand_equal_p) <COMPONENT_REF>:
Do not take into account operand 2.
(operand_compare::hash_operand) <COMPONENT_REF>: Likewise.
gcc/testsuite/
* gnat.dg/opt99.adb: New test.
* gnat.dg/opt99_pkg1.ads, gnat.dg/opt99_pkg1.adb: New helper.
* gnat.dg/opt99_pkg2.ads: Likewise.
Jakub Jelinek [Mon, 24 Oct 2022 15:53:16 +0000 (17:53 +0200)]
c, c++: Fix up excess precision handling of scalar_to_vector conversion [PR107358]
As mentioned earlier in the C++ excess precision support mail, the following
testcase is broken with excess precision both in C and C++ (though just in C++
it was triggered in real-world code).
scalar_to_vector is called in both FEs after the excess precision promotions
(or stripping of EXCESS_PRECISION_EXPR), so we can then get invalid
diagnostics that say float vector + float involves truncation (on ia32
from long double to float).
The following patch fixes that by calling scalar_to_vector on the operands
before the excess precision promotions, let scalar_to_vector just do the
diagnostics (it does e.g. fold_for_warn so it will fold
EXCESS_PRECISION_EXPR around REAL_CST to constants etc.) but will then
do the actual conversions using the excess precision promoted operands
(so say if we have vector double + (float + float) we don't actually do
vector double + (float) ((long double) float + (long double) float)
but
vector double + (double) ((long double) float + (long double) float)
2022-10-24 Jakub Jelinek <jakub@redhat.com>
PR c++/107358
gcc/c/
* c-typeck.c (build_binary_op): Pass operands before excess precision
promotions to scalar_to_vector call.
gcc/testsuite/
* c-c++-common/pr107358.c: New test.
Jakub Jelinek [Mon, 24 Oct 2022 14:25:29 +0000 (16:25 +0200)]
c++: Fix up constexpr handling of char/signed char/short pre/post inc/decrement [PR105774]
signed char, char or short int pre/post inc/decrement are represented by
normal {PRE,POST}_{INC,DEC}REMENT_EXPRs in the FE and only gimplification
ensures that the {PLUS,MINUS}_EXPR is done in unsigned version of those
types:
case PREINCREMENT_EXPR:
case PREDECREMENT_EXPR:
case POSTINCREMENT_EXPR:
case POSTDECREMENT_EXPR:
{
tree type = TREE_TYPE (TREE_OPERAND (*expr_p, 0));
if (INTEGRAL_TYPE_P (type) && c_promoting_integer_type_p (type))
{
if (!TYPE_OVERFLOW_WRAPS (type))
type = unsigned_type_for (type);
return gimplify_self_mod_expr (expr_p, pre_p, post_p, 1, type);
}
break;
}
This means during constant evaluation we need to do it similarly (either
using unsigned_type_for or using widening to integer_type_node).
The following patch does the latter.
2022-10-24 Jakub Jelinek <jakub@redhat.com>
PR c++/105774
* constexpr.c (cxx_eval_increment_expression): For signed types
that promote to int, evaluate PLUS_EXPR or MINUS_EXPR in int type.
Jakub Jelinek [Wed, 12 Oct 2022 15:54:08 +0000 (17:54 +0200)]
libgomp: Fix up creation of artificial teams
When not in explicit parallel/target/teams construct, we in some cases create
an artificial parallel with a single thread (either to handle target nowait
or for task reduction purposes). In those cases, it handled again artificially
created implicit task (created by gomp_new_icv for cases where we needed to write
to some ICVs), but as the testcases show, didn't take into account possibility
of this being done from explicit task(s). The code would destroy/free the previous
task and replace it with the new implicit task. If task is an explicit task
(when teams is NULL, all explicit tasks behave like if (0)), it is a pointer to
a local stack variable, so freeing it doesn't work, and additionally we shouldn't
lose the explicit tasks - the new implicit task should instead replace the
ancestor task which is the first implicit one.
2022-10-12 Jakub Jelinek <jakub@redhat.com>
* task.c (gomp_create_artificial_team): Fix up handling of invocations
from within explicit task.
* target.c (GOMP_target_ext): Likewise.
* testsuite/libgomp.c/task-7.c: New test.
* testsuite/libgomp.c/task-8.c: New test.
* testsuite/libgomp.c-c++-common/task-reduction-17.c: New test.
* testsuite/libgomp.c-c++-common/task-reduction-18.c: New test.
Jakub Jelinek [Sat, 24 Sep 2022 07:24:26 +0000 (09:24 +0200)]
openmp: Fix ICE with taskgroup at -O0 -fexceptions [PR107001]
The following testcase ICEs because with -O0 -fexceptions GOMP_taskgroup_end
call isn't directly followed by GOMP_RETURN statement, but there are some
conditionals to handle exceptions and we fail to find the correct GOMP_RETURN.
The fix is to treat taskgroup similarly to target data, both of these constructs
emit a try { body } finally { end_call } around the construct's body during
gimplification and we need to see proper construct nesting during gimplification
and omp lowering (including nesting of regions checks), but during omp expansion
we don't really need their nesting anymore, all we need is emit something at
the start of the region and the end of the region is the end API call we've
already emitted during gimplification. For target data, we weren't adding
GOMP_RETURN statement during omp lowering, so after that pass it is treated
merely like stand-alone omp directives. This patch does the same for
taskgroup too.
2022-09-24 Jakub Jelinek <jakub@redhat.com>
PR c/107001
* omp-low.c (lower_omp_taskgroup): Don't add GOMP_RETURN statement
at the end.
* omp-expand.c (build_omp_regions_1): Clarify GF_OMP_TARGET_KIND_DATA
is not stand-alone directive. For GIMPLE_OMP_TASKGROUP, also don't
update parent.
(omp_make_gimple_edges) <case GIMPLE_OMP_TASKGROUP>: Reset
cur_region back after new_omp_region.