mips.c (print_operand): Extend '%D' to memory operands.
* config/mips/mips.c (print_operand): Extend '%D' to memory operands.
(mips_move_2words): When splitting a move into two instructions,
prefix the second address operand with '%D'.
Jan Hubicka [Wed, 11 Jul 2001 19:42:35 +0000 (21:42 +0200)]
flow.c (merge_blocks_move_successor_nojumps): Do not crash when fallthru edge is present.
* flow.c (merge_blocks_move_successor_nojumps): Do not crash
when fallthru edge is present.
(mege_blocks): Handle case where creation of jump insn
is required.
* basic-block.h (CLEANUP_EXPENSIVE, CLEANUP_CROSSJUMP,
CLEANUP_POST_REGSTACK): New constants.
* except.c (finish_eh_generation): Update call of cleanup_cfg,
* jump.c (rtx_renumbered_equal_p): Handle 't' fields.
* output.h (cleanup_cfg): Update prototype.
* reg-stack.c (reg_to_stack): Use cleanup_cfg instead of jump_optimize
* sibcall.c (optimize_sibling_and_tail_recursive_call): Update
cleanup_cfg call; kill missleading comment.
* toplev.c (rest_of_compilation): Update all cleanup_cfg calls.
* flow.c (merge_blocks, try_optimize_cfg, cleanup_cfg): Accept mode
parameter; control optimizations performed using it.
(flow_find_cross_jump, outgoing_edges_match, try_crossjump_to_edge,
try_crossjump_bb): New functions.
* pa.c (pa_output_function_prologue): Delete prototype. Make function
extern.
* pa.h (ASM_OUTPUT_MI_THUNK): Rename output_function_prologue to
pa_output_function_prologue.
* pa-protos.h (pa_output_function_prologue): New prototype.
Mark Mitchell [Wed, 11 Jul 2001 17:35:56 +0000 (17:35 +0000)]
stmt.c (parse_output_constraint): New function, split out from ...
* stmt.c (parse_output_constraint): New function, split out
from ...
(expand_asm_operands): ... here. Use parse_output_constraint.
* tree.h (parse_output_constraint): Declare it.
* semantics.c (finish_asm_stmt): Mark the output operands
to an asm addressable, if necessary.
Ben Elliston [Wed, 11 Jul 2001 07:56:23 +0000 (07:56 +0000)]
re PR c++/80 (g++ enum and attributed __packed__)
2001-07-11 Ben Elliston <bje@redhat.com>
PR c++/80
* decl.c (finish_enum): New "attributes" argument; pass it to
cplus_decl_attributes. Use a narrower type if the enum is packed.
* cp-tree.h (finish_enum): Adjust prototype.
* parse.y (enum_head): New non-terminal.
(structsp): Use it. Enums now may be preceded or followed by
optional attributes -- pass their chained tree to finish_enum().
* pt.c (tsubst_enum): Pass NULL_TREE for the new argument.
* parse.y (resolve_package): Abort if qualified expression member
isn't right.
(qualify_ambiguous_name): Don't qualify as type if `this' in use.
Fixes PR java/1391
* libI77/fio.h: Revert type of url from off_t to int.
* libI77/dfe.c (c_dfe): Cast offset expression in FSEEK to off_t.
* libI77/due.c (c_due): Ditto. (e_rdue): Ditto.
* libI77/ftell_.c (G77_ftell_0): Cast result of FTELL to integer.
(G77_fseek_0): Cast offset argument of FSEEK to off_t.
Neil Booth [Tue, 10 Jul 2001 18:44:34 +0000 (18:44 +0000)]
Makefile.in (toplev.o, [...]): Depend on debug.h, wrap long lines.
* Makefile.in (toplev.o, sdbout.o, dbxout.o, dwarfout.o,
dwarf2out.o): Depend on debug.h, wrap long lines.
* dbxout.c: Include debug.h.
(dbx_debug_hooks): New.
(dbxout_init): Make static, take just 2 args.
(dbxout_finish): Make static.
* dbxout.h (dbxout_init, dbxout_finish): Delete.
* debug.c: New file.
* debug.h: New file.
* dwarf2out.c: Include debug.h.
(dwarf2_debug_hooks): New.
(dwarf2out_init): Make static.
(dwarf2out_finish): Make static, take 2 args.
* dwarf2out.h (dwarf2out_init, dwarf2out_finish): Delete.
* dwarfout.c: Include debug.h.
(dwarf_debug_hooks): New.
(dwarfout_init): Make static.
(dwarfout_finish): Make static, take 2 args.
* dwarfout.h (dwarfout_init, dwarfout_finish): Delete.
* sdbout.c: Include debug.h.
(sdb_debug_hooks): New.
(sdbout_init): Make static, take 2 args.
* sdbout.h (sdbout_init): Delete.
* toplev.c: Include debug.h.
(debug_hooks): New.
(compile_file): Set deubg_hooks based on command line options.
Use the hooks unconditionally rather than conditional compilation.
Jeffrey A Law [Tue, 10 Jul 2001 16:27:54 +0000 (16:27 +0000)]
ssa-ccp.c (first_phi_node): Remove.
* ssa-ccp.c (first_phi_node): Remove. Replace uses with calls to
first_insn_after_basic_block_note instead.
* df.c (df_bb_refs_unlink): #if 0 out for now.
* ssa.h: Add prototype for ssa_const_prop
* ssa-ccp.c: Add prototype for ssa_fast_dce and mark_references
(ssa_ccp_substitute_constants): Fix signed vs unsigned comparison
(ssa_fast_dce): Remove unused variable
Jason Merrill [Tue, 10 Jul 2001 15:39:29 +0000 (11:39 -0400)]
collect2.c (main): Set COLLECT_NO_DEMANGLE for subprocesses.
* collect2.c (main): Set COLLECT_NO_DEMANGLE for subprocesses.
(dump_file): Only pad the demangled name with spaces if the
mangled name was padded with spaces.
Jason Merrill [Tue, 10 Jul 2001 13:54:24 +0000 (09:54 -0400)]
g++-dg.exp: Load file-format and target-supports like gcc.
* lib/g++-dg.exp: Load file-format and target-supports like gcc.
(g++-dg-prune): Call prune_gcc_output.
* prune.exp: New file for prune_gcc_output.
* lib/g++.exp, lib/gcc.exp: Load it.
Richard Kenner [Tue, 10 Jul 2001 11:29:25 +0000 (11:29 +0000)]
expr.c (expand_expr, [...]): Don't force using bitfield extraction if no direct load if...
* expr.c (expand_expr, case COMPONENT_REF): Don't force using bitfield
extraction if no direct load if either EXPAND_CONST_ADDRESS or
EXPAND_INITIALIZER.
* typeck.c (unary_complex_lvalue): Do not duplicate the
argument to modify, pre-, or post-increment when used as an
lvalue and when the argument has side-effects.
For ch/:
2001-07-10 Jan van Male <jan.vanmale@fenk.wau.nl>
* ch-tree.h: Remove prototype for combine_parm_decls, unused
function.
* bitmap.c: Rename bitmap_zero to bitmap_zero_bits to fix warnings.
* bitmap.h: Rename bitmap_zero to bitmap_zero_bits to fix
warnings.
* bitmap.c (bitmap_operation): Change user.
* bitmap.h (EXECUTE_IF_AND_COMPL_IN_BITMAP): Likewise.
For cp/:
2001-07-10 Jan van Male <jan.vanmale@fenk.wau.nl>
* typeck.c (unary_complex_lvalue): Do not duplicate the
argument to modify, pre-, or post-increment when used as an
lvalue and when the argument has side-effects.
For ch/:
2001-07-10 Jan van Male <jan.vanmale@fenk.wau.nl>
* ch-tree.h: Remove prototype for combine_parm_decls, unused
function.
* config/c4x/c4x.c (TARGET_INIT_BUILTINS): Define.
(TARGET_EXPAND_BUILTIN): Define.
(c4x_init_builtins): Make endlink arg a local.
(c4x_print_operand): Fix typos in adjust_address usages.
* config/c4x/c4x-protos.h (c4x_init_builtins): Update decl.
* config/c4x/c4x.h (MD_INIT_BUILTINS): Remove.
(MD_EXPAND_BUILTIN): Remove.
* config/i386/i386.c (TARGET_INIT_BUILTINS): Define.
(TARGET_EXPAND_BUILTIN): Define.
(ix86_init_mmx_sse_builtins): New function, was ix86_init_builtins.
(ix86_init_builtins): Call new function only if TARGET_MMX.
* config/i386/i386-protos.h (ix86_init_mmx_sse_builtins): Declare.
* config/i386/i386.h (MD_INIT_BUILTINS): Remove.
(MD_EXPAND_BUILTIN): Remove.
Erik Rozendaal [Mon, 9 Jul 2001 23:46:06 +0000 (19:46 -0400)]
typeck.c (unary_complex_lvalue): Do not duplicate the argument to modify...
* typeck.c (unary_complex_lvalue): Do not duplicate the
argument to modify, pre-, or post-increment when used as an
lvalue and when the argument has side-effects.
Phil Edwards [Mon, 9 Jul 2001 19:37:01 +0000 (19:37 +0000)]
explanations.html: New file.
2001-07-09 Phil Edwards <pme@sources.redhat.com>
* docs/html/explanations.html: New file.
* docs/html/configopts.html: Link to it to provide more notes
on cstdio. Minor markup and spacing fixes.
* docs/html/27_io/howto.html: Talk about sync_with_stdio.
Jan Hubicka [Mon, 9 Jul 2001 19:32:53 +0000 (21:32 +0200)]
flow.c (redirect_edge_and_branch_force): New.
* flow.c (redirect_edge_and_branch_force): New.
(can_fallthru): Ensure that basic blocks are succeeding.
(try_optimize_cfg): Do not delete basic block if it is the last one.
* flow.c (try_redirect_by_replacing_jump): Do not remove
jumps with side effects, unlink chain on fallthru edge;
set block for new jump instruction; avoid basic block to
over by line number note.
* flow.c (try_simplify_condjump): Verify that the condjump
is not always falling trought.
* doc/c-tree.texi: Document representation of attributes.
2001-07-08 Joseph S. Myers <jsm28@cam.ac.uk>
* doc/tm.texi: Update some places for the rename of target to
targetm. Fix typo.
2001-07-08 Joseph S. Myers <jsm28@cam.ac.uk>
* target.h (struct gcc_target): Add insert_attributes.
* target-def.h (TARGET_INSERT_ATTRIBUTES): Define.
(TARGET_INITIALIZER): Update.
* tree.c, tree.h (default_insert_attributes): New function.
Update comments on other default functions to refer to targetm,
not target.
* doc/tm.texi (INSERT_ATTRIBUTES): Update to document
TARGET_INSERT_ATTRIBUTES.
(SET_DEFAULT_DECL_ATTRIBUTES): Remove.
* c-common.c (decl_attributes): Use targetm.insert_attributes.
Don't use PRAGMA_INSERT_ATTRIBUTES.
* Makefile.in (c-common.o): Depend on $(TARGET_H).
* c-decl.c (start_decl, start_function): Don't call
SET_DEFAULT_DECL_ATTRIBUTES.
* config/c4x/c4x.h (SET_DEFAULT_DECL_ATTRIBUTES): Don't define.
* config/c4x/c4x-protos.h (c4x_set_default_attributes): Don't
declare.
* config/c4x/c4x.c (TARGET_INSERT_ATTRIBUTES): Define.
(c4x_check_attribute): Avoid modifying attribute list itself.
(c4x_set_default_attributes): Rename to c4x_insert_attributes.
Make static.
* config/sh/sh.h (PRAGMA_INSERT_ATTRIBUTES): Don't define.
* config/sh/sh-protos.h (sh_pragma_insert_attributes): Don't
declare.
* config/sh/sh.c (TARGET_INSERT_ATTRIBUTES): Define.
(sh_pragma_insert_attributes): Rename to sh_insert_attributes.
Make static.
* config/v850/v850.h (SET_DEFAULT_DECL_ATTRIBUTES): Don't define.
* config/v850/v850-protos.h (v850_set_default_decl_attr): Don't
declare.
* config/v850/v850.c (TARGET_INSERT_ATTRIBUTES): Define.
(v850_set_default_decl_attr): Rename to v850_insert_attributes.
Adjust parameters. Make static.
2001-07-08 Joseph S. Myers <jsm28@cam.ac.uk>
* c-common.c (decl_attributes): Only take a single attributes
parameter.
* c-common.h (decl_attributes): Update prototype.
* c-decl.c (start_decl, start_function): Only take a single
attributes parameter. Update calls to decl_attributes.
(finish_struct, finish_enum): Update calls to decl_attributes.
(push_parm_decl): Expect unified list of attributes. Update call
to decl_attributes.
* c-parse.in (fndef, initdcl, notype_initdcl, nested_function,
notype_nested_function, component_declarator,
component_notype_declarator, label): Update calls to
decl_attributes.
(absdcl_maybe_attribute, parm, firstparm, myparm): Unify attribute
lists that are passed to push_parm_decl.
* c-tree.h (start_function, start_decl): Update prototypes.
* config/sh/sh-protos.h, config/sh/sh.c
(sh_pragma_insert_attributes): Only take a single attributes
parameter.
* config/sh/sh.h (PRAGMA_INSERT_ATTRIBUTES): Likewise.
* doc/tm.texi (INSERT_ATTRIBUTES): Update.
* objc/objc-act.c (define_decl, generate_objc_symtab_decl,
build_module_descriptor, generate_static_references,
generate_strings, build_selector_translation_table,
generate_descriptor_table, generate_protocols,
generate_ivars_list, generate_dispatch_table,
generate_protocol_list, generate_category,
generate_shared_structures, really_start_method, add_objc_decls,
generate_classref_translation_entry): Update calls to start_decl
and start_function.
(build_tmp_function_decl, start_method_def): Unify attribute lists
that are passed to push_parm_decl.
2001-07-08 Neil Booth <neil@daikokuya.demon.co.uk>
* final.c (no_asm_to_stream): New.
(final_scan_insn): Use target structures for prologue ends
and epilogue starts.
* output.h (no_asm_to_stream): New.
* target-def.h (TARGET_ASM_FUNCTION_END_PROLOGUE,
TARGET_ASM_FUNCTION_BEGIN_EPILOGUE): New.
(TARGET_ASM_OUT): Update.
* target.h (struct gcc_target): New members function_end_prologue
and function_begin_epilogue.
* config/1750/1750.h (ASM_OUTPUT_FUNNAM): Delete as unused.
* config/alpha/alpha-protos.h (output_end_prologue): Delete.
* config/alpha/alpha.c (output_end_prologue): Rename to
alpha_output_function_end_prologue. Use in target struct
and make static.
* config/alpha/alpha.h (FUNCTION_END_PROLOGUE): Delete.
* config/ia64/ia64-protos.h (ia64_output_end_prologue): Delete.
* config/ia64/ia64.c (ia64_output_end_prologue): Rename to
ia64_output_function_end_prologue. Use in target struct
and make static.
(ia64_function_prologue, ia64_funciton_epilogue): Rename
mistyped prototypes.
* config/ia64/ia64.h (FUNCTION_END_PROLOGUE): Delete.
* config/m88k/m88k-protos.h (m88k_end_prologue, m88k_begin_epilogue):
Delete.
* config/m88k/m88k.c (m88k_end_prologue, m88k_begin_epilogue): Rename
an use in target struct, make static.
* config/ia64/ia64.h (FUNCTION_END_PROLOGUE, FUNCTION_BEGIN_EPILOGUE):
Delete.
2001-07-08 Richard Henderson <rth@redhat.com>
* stmt.c (emit_case_nodes): Convert modes properly in low+high test.
2001-07-08 Richard Henderson <rth@redhat.com>
* config/i386/i386.md: Remove constraints strings from define_split
and define_peephole2 patterns.
(eh_return_si, eh_return_di): Split eh_return_1 for modes.
(eh_return): Use them.
2001-07-08 Richard Henderson <rth@redhat.com>
* doc/tm.texi (Exception Handling): New subnode of Stack and Calling.
Document MD_FALLBACK_FRAME_STATE_FOR.
* config/m68hc11/m68hc11.c (m68hc11_initial_elimination_offset):
Take into account m68hc11_sp_correction for FRAME_POINTER_REGNUM
elimination.
* config/m68hc11/m68hc11.h (STARTING_FRAME_OFFSET): Use 0.
2001-07-07 Nick Clifton <nickc@cambridge.redhat.com>
* config/ia64/sysv4.h (ASM_OUTPUT_LABELREF): Append # to end
of the label inside NAME as opposed to just the end of NAME.
2001-07-07 Neil Booth <neil@daikokuya.demon.co.uk>
* except.h (MUST_USE_SJLJ_EXCEPTIONS): Examine the value of
DWARF2_UNWIND_INFO not just whether it is defined.
2001-07-06 Diego Novillo <dnovillo@redhat.com>
* combine.c (combine_simplify_rtx): Also recompute 'mode' if the
call to simplify_binary_operation returns a new pattern.
2001-07-06 Roman Lechtchinsky <rl@cs.tu-berlin.de>
* glimits.h (__SHRT_MAX__): New.
(SHRT_MIN, USHRT_MAX): Define in terms of SHRT_MAX.
(SHRT_MAX): Define in terms of __SHRT_MAX__.
2001-07-06 Jan van Male <jan.vanmale@fenk.wau.nl>
* alias.c (base_alias_check): Cast GET_MODE_UNIT_SIZE to int to
avoid warnings.
2001-07-06 Richard Henderson <rth@redhat.com>
* bitmap.c (bitmap_release_memory): Move adjacent to the
allocation functions.
(bitmap_first_set_bit, bitmap_last_set_bit): Streamline knowing
the implementation. Binary search for the set bit.
(bitmap_union_of_diff): Allocate the temporary on the stack
instead of using xmalloc.
2001-07-06 Richard Henderson <rth@redhat.com>
* genrecog.c (validate_pattern): Warn for constraints in
define_{expand,split,peephole2}. Remove strict_low_part
before looking up match_dup.
2001-07-06 DJ Delorie <dj@redhat.com>
* doc/gcc.texi (Makefile): Rename to be a more general purpose
chapter about various build hints and history. Add section
talking about the various types of native and cross builds.
2001-07-06 Neil Booth <neil@daikokuya.demon.co.uk>
* Makefile.in (final.o): Depend on target.h.
* final.c: Include target.h.
(default_function_pro_epilogue): New.
(final_start_function): Use target structure for function prologues.
(final_end_function): Use target structure for function epilogues.
* fold-const.c (real_hex_to_f): Constify s and p.
* output.h (default_function_pro_epilogue): New.
* real.h (real_hex_to_f): Update prototype.
* target-def.h (TARGET_ASM_FUNCTION_PROLOGUE,
TARGET_ASM_FUNCTION_EPILOGUE, TARGET_ASM_OUT): New.
(TARGET_INITIALIZER): Update.
* target.h (gcc_target): Add struct asm_out.
* doc/tm.texi: Update.
config:
Update each arch to use TARGET_ASM_FUNCTION_PROLOGUE and
TARGET_ASM_FUNCTION_EPILOGUE. Move macro code to functions
in cpu/cpu.c, or rename old functions consistently. Take
a HOST_WIDE INT not an int as the SIZE parameter. Remove now
redundant macros and prototypes. Make new functions static.
Fri Jul 6 11:47:59 2001 Jeffrey A Law (law@cygnus.com)
* basic-block.h (first_insn_after_basic_block_note): Declare.
* flow.c (first_insn_after_basic_block_note): Define. Moved
from...
* ssa.c (first_insn_after_basic_block_note): Remove.
* ssa-dce.c (find_inherently_necessary): Consider BARRIERs
necessary.
(ssa_eliminate_dead_code): Properly update the CFG and PHI
nodes when we find a dead conditional branch. Insert BARRIERs
after any blocks with no successors, but which do not have
any BARRIERs.
2001-07-06 Zack Weinberg <zackw@stanford.edu>
* varray.c (varray_check_failed): Use internal_error.
* config/m68hc11/m68hc11.md ("*ashlsi3"): Operand 1 can be a memory
reference using the stack pointer, adjust it since we push Y
temporarily.
("*ashrsi3"): Likewise.
("*lshrsi3"): Likewise.
* flow.c: Reverse Jan Hubicka's patch of 02July2001.
(try_redirect_by_replacing_jump): Reverse updating properly the
count and frequency information. Reverse removing cc0 setter.
(forwarder_block_p): Reverse fixing for fallthru blocks.
2001-07-05 DJ Delorie <dj@redhat.com>
* gcc.c (TARGET_OPTION_TRANSLATE_TABLE): New.
(translate_options): If the above is defined, use it to map
given options to new options.
* doc/tm.texi: Document it.
* dwarf2out.c (output_loc_list): Use an all ones mask for
.text asm output and don't rely on long long
literals. Reformat some long lines.
2001-07-05 Andreas Jaeger <aj@suse.de>
* doc/gcc.texi (GNU/Linux): Remove accidental re-add of GPL
section.
2001-07-04 Daniel Berlin <dan@cgsoftware.com>
* dwarf2out.c (dwarf2out_define): Update comment.
(dwarf2out_undef): Ditto.
(dwarf2out_start_source_file): Ditto.
(dwarf2out_end_source_file): Ditto.
(dwarf2out_finish): Output DW_MACINFO_end_file for primary file,
since we never call the start/end debug hook for the primary file.
2001-07-04 Kazu Hirata <kazu@hxi.com>
* config/h8300/h8300.c (get_shift_alg): Remove an extra operand
from shll.
* cppinit.c (remove_dup_dirs): Inform if a system include
directory is being reordered.
* doc/invoke.texi (Directory Options): GCC warns if you hide a
system include.
* doc/cpp.texi (Search Paths): Likewise.
* doc/gcc.texi (Interoperation): Remove information about
-I/usr/include.
2001-07-04 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* gcc.c (process_command): Don't assign elements of a const char*.
Wed Jul 4 13:40:02 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* emit-rtl.c (change_address): Don't abort if invalid address while
reload is in progress.
2001-07-04 Daniel Berlin <dan@cgsoftware.com>
* c-lex.c (cb_file_change): Pass line number to
debug_start_source_file.
(cb_undefine): Pass correct line number to debug_undef.
* toplev.c (debug_start_source_file): Add line number to
parameters. Pass it along to dwarf2out_start_source_file.
(decode_g_option): Stop resetting debug level back to normal when
we change debug formats, unless the current level is
none. (Before, -g3 -gdwarf-2 would use debug level 2, rather than
3).
* toplev.h (debug_start_source_file): Add line number to
parameters.
* dwarf2out.h (dwarf2out_start_source_file): Add line number to
parameters.
* dwarf2out.c (dwarf2out_start_source_file): Add line number to
parameters.
Output debug_macinfo data for starting file if requested.
(dwarf2out_end_source_file): Output debug_macinfo data for ending
file if requested.
(dwarf2out_define): Output debug_macinfo data for defining a macro
if requested.
(dwarf2out_undef): Output debug_macinfo data for undefining a
macro if requested.
(DEBUG_MACINFO_SECTION): New. DWARF2 macro info section name.
(DEBUG_MACINFO_SECTION_LABEL): New. DWARF2 macro info section label.
(macinfo_section_label): New. DWARF2 macro info section label.
(dwarf2out_init): If we want macro info, output the start label
for the section.
(dwarf2out_finish): If we want macro info, add a DW_AT_macro_info
attribute to the compilation unit die pointing to the macro info.
2001-07-04 Daniel Berlin <dan@cgsoftware.com>
* dwarf2out.c (new_loc_list): Move to inside #ifdef
DWARF2_DEBUGGING_INFO.
(add_loc_descr_to_loc_list): Ditto.
(output_loc_list): Ditto.
Also, fix thinko in curr not being initialized.
(gen_internal_sym): Ditto.
Wed Jul 4 13:40:02 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* emit-rtl.c (replace_equiv_address): New function.
* expr.h (replace_equiv_address): New declaration.
* explow.c (validize_mem): Call it instead of change_address and
also call if -fforce-addr and address is constant.
* expr.c: Replace more calls to change_address with adjust_address
and/or replace_equiv_address or to validize_mem.
* function.c, regmove.c, config/alpha/alpha.c: Likewise.
* config/arm/arm.md, config/clipper/clipper.md: Likewise.
* config/dsp16xx/dsp16xx.md, config/fr30/fr30.c: Likewise.
* config/i370/i370.md, config/i860/i860.md: Likewise.
* config/i960/i960.md, config/mips/mips.c: Likewise.
* config/mips/mips.md, config/pa/pa.md: Likewise.
* config/pdp11/pdp11.md, config/rs6000/rs6000.c: Likewise.
* config/rs6000/rs6000.md, config/sh/sh.md: Likewise.
2001-07-04 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* bitmap.c (bitmap_union_of_diff): Don't use BITMAP_ALLOCA.
* bitmap.h (BITMAP_ALLOCA): Don't pass alloca as an argument to a
function.
2001-07-04 Joseph S. Myers <jsm28@cam.ac.uk>
* doc/include: New directory.
* doc/fdl.texi: Move to doc/include/fdl.texi.
* doc/texinfo.tex: Move to doc/include/texinfo.tex.
* doc/include/funding.texi, doc/include/gpl.texi: New files.
* doc/gcc.texi: Use funding.texi and gpl.texi.
* Makefile.in ($(docdir)/cpp.info, $(docdir)/gcc.info,
$(docdir)/cppinternals.info, cpp.dvi. gcc.dvi. cppinternals.dvi):
Update dependencies and use -I $(docdir)/include.
* flow.c (forwarder_block_p): Fix for fallthru blocks.
(try_redirect_by_replacing_jump): Update properly the count
and frequency information.
Mon Jul 2 14:20:13 2001 Jeffrey A Law (law@cygnus.com)
* toplev.c (dump_file_index): Move SSA dumps just after first
jump dump.
(dump_file): Corresponding changes.
(rest_of_compilation): Move SSA path to just after the first
jump pass.
* doc/gcc.texi (Passes): Update due to movement of SSA path.
* doc/invoke.texi: Update dump file #s as they were completely
out of date with reality.
* doc/install.texi: Various spelling and markup fixes.
(Installing GCC): Component specific installation instructions are
gone.
Fix reference.
Warn about removing old install dir in the presence of shared libs.
(Configuration): Invoke with options target to match configure
--help.
Consistently refer to gas, gld pathnames.
Invert --enable-multilib documentation.
Remove references to old compiler versions.
Mon Jul 2 12:50:51 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* flow.c (try_simplify_condjump): Fix typo in updating fallthru flags.
* tlink.c (recompile_files): Remove COMPILER_PATH and
LIBRARY_PATH from the environment.
2001-07-01 Zack Weinberg <zackw@stanford.edu>
* c-common.h (enum rid): Add RID_FIRST_AT, RID_LAST_AT,
RID_LAST_PQ. Move RID_FIRST_PQ down with the other FIRST/LAST
enumerators.
(OBJC_IS_AT_KEYWORD, OBJC_IS_PQ_KEYWORD): New macros.
* c-parse.in (OBJC_STRING): Kill.
(objc_string): Decompose to [objc_string] '@' STRING.
(reswords): Take the leading '@' off all the Objective C keywords.
(objc_rid_sans_at): Kill.
(init_reswords): Don't initialize it.
(yylexname): Use OBJC_IS_AT_KEYWORD and OBJC_IS_PQ_KEYWORD.
(_yylex): Kill reconsider label. Look ahead one token after
an '@'; if we get an identifier, check whether it's an
Objective C @-keyword. If so, return the keyword. Otherwise,
put back the token and return the '@' as a terminal.
* cpplib.c (lex_macro_node): Remove unnecessary check for
leading '@' on identifier. Clarify control flow and commentary.
Sun Jul 1 11:53:52 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* cse.c (new_label_ref): Variable deleted.
(insert): Remove set of new_label_ref.
(check_for_label_ref): New function.
(cse_basic_block): Don't check new_label_ref; call check_for_label_ref.
Joseph Myers [Sun, 8 Jul 2001 19:58:19 +0000 (20:58 +0100)]
c-common.c (decl_attributes): Only take a single attributes parameter.
* c-common.c (decl_attributes): Only take a single attributes
parameter.
* c-common.h (decl_attributes): Update prototype.
* c-decl.c (start_decl, start_function): Only take a single
attributes parameter. Update calls to decl_attributes.
(finish_struct, finish_enum): Update calls to decl_attributes.
(push_parm_decl): Expect unified list of attributes. Update call
to decl_attributes.
* c-parse.in (fndef, initdcl, notype_initdcl, nested_function,
notype_nested_function, component_declarator,
component_notype_declarator, label): Update calls to
decl_attributes.
(absdcl_maybe_attribute, parm, firstparm, myparm): Unify attribute
lists that are passed to push_parm_decl.
* c-tree.h (start_function, start_decl): Update prototypes.
* config/sh/sh-protos.h, config/sh/sh.c
(sh_pragma_insert_attributes): Only take a single attributes
parameter.
* config/sh/sh.h (PRAGMA_INSERT_ATTRIBUTES): Likewise.
* doc/tm.texi (INSERT_ATTRIBUTES): Update.
* objc/objc-act.c (define_decl, generate_objc_symtab_decl,
build_module_descriptor, generate_static_references,
generate_strings, build_selector_translation_table,
generate_descriptor_table, generate_protocols,
generate_ivars_list, generate_dispatch_table,
generate_protocol_list, generate_category,
generate_shared_structures, really_start_method, add_objc_decls,
generate_classref_translation_entry): Update calls to start_decl
and start_function.
(build_tmp_function_decl, start_method_def): Unify attribute lists
that are passed to push_parm_decl.
cp:
* decl.c (grokdeclarator), decl2.c (cplus_decl_attributes): Update
calls to decl_attributes.
testsuite:
* gcc.c-torture/compile/20010701-1.c,
g++.old-deja/g++.ext/attrib6.C: New tests.
i386.md: Remove constraints strings from define_split and define_peephole2 patterns.
* config/i386/i386.md: Remove constraints strings from define_split
and define_peephole2 patterns.
(eh_return_si, eh_return_di): Split eh_return_1 for modes.
(eh_return): Use them.