target.h (targetm.address_cost): New.

	* target.h (targetm.address_cost): New.
	* target-def.h (TARGET_ADDRESS_COST): New.
	(TARGET_RTX_COSTS): Uncomment.  Oops.
	* cse.c (address_cost): Use new target hook.
	(default_address_cost): New.
	* output.h (default_address_cost): Declare.
	* hooks.c (hook_int_rtx_0): New.
	* hooks.h (hook_int_rtx_0): Declare.
	* loop.c (combine_givs_p): Remove if 0 code.
	* system.h (ADDRESS_COST): Poison.

	* config/alpha/alpha.c, config/alpha/alpha.h, config/d30v/d30v.c,
	config/d30v/d30v.h, config/ia64/ia64.c, config/ia64/ia64.h,
	config/m32r/m32r.c, config/m32r/m32r.h, config/mcore/mcore.c,
	config/mcore/mcore.h, config/mmix/mmix.c, config/mmix/mmix.h,
	config/rs6000/rs6000.c, config/rs6000/rs6000.h, config/sparc/sparc.c,
	config/sparc/sparc.h, config/v850/v850.c, config/v850/v850.h,
	config/xtensa/xtensa.c, config/xtensa/xtensa.h
	(TARGET_ADDRESS_COST): Define as hook_int_rtx_0.
	(ADDRESS_COST): Remove.

	* config/arc/arc-protos.h, config/arc/arc.c, config/arc/arc.h,
	config/avr/avr-protos.h, config/avr/avr.c, config/avr/avr.h,
	config/c4x/c4x-protos.h, config/c4x/c4x.c, config/c4x/c4x.h,
	config/dsp16xx/dsp16xx-protos.h, config/dsp16xx/dsp16xx.c,
	config/dsp16xx/dsp16xx.h, config/i386/i386-protos.h,
	config/i386/i386.c, config/i386/i386.h, config/i960/i960-protos.h,
	config/i960/i960.c, config/i960/i960.h, config/ip2k/ip2k-protos.h,
	config/ip2k/ip2k.c, config/ip2k/ip2k.h, config/mips/mips-protos.h,
	config/mips/mips.c, config/mips/mips.h,
	config/m68hc11/m68hc11-protos.h, config/m68hc11/m68hc11.c,
	config/m68hc11/m68hc11.h, config/ns32k/ns32k-protos.h,
	config/ns32k/ns32k.c, config/ns32k/ns32k.h, config/pa/pa-protos.h,
	config/pa/pa.c, config/pa/pa.h, config/s390/s390-protos.h,
	config/s390/s390.c, config/s390/s390.h, config/vax/vax-protos.h,
	config/vax/vax.c, config/vax/vax.h
	(foo_address_cost): Make static.
	(TARGET_ADDRESS_COST): New.
	(ADDRESS_COST): Remove.

	* config/arm/arm.h, config/arm/arm.c, config/m88k/m88k.h,
	config/m88k/m88k.c, config/romp/romp.h, config/romp/romp.c,
	config/sh/sh.c, config/sh/sh.h, config/stormy16/stormy16.c,
	config/stormy16/stormy16.h
	(ADDRESS_COST): Move code ...
	(foo_address_cost): ... here.
	(TARGET_ADDRESS_COST): New.

	* config/m32r/m32r.c (m32r_address_cost): Remove.
	* config/m32r/m32r-protos.h: Update.

	* config/mmix/mmix.c (mmix_address_cost): Remove.
	* config/mmix/mmix-protos.h: Update.

	* config/mn10300/mn10300.c (mn10300_address_cost_1): Rename from
	mn10300_address_cost; move unsig allocation ...
	(mn10300_address_cost): ... here.
	(TARGET_ADDRESS_COST): New.
	* config/mn10300/mn10300-protos.h: Update.
	* config/mn10300/mn10300.h (ADDRESS_COST): Remove.

From-SVN: r61989

diff --git a/gcc/doc/tm.texi b/gcc/doc/tm.texi
index 84dc1de0c15a87d9405f4d2f864e8f1459700feb..382df86688c9fa2b57cf8d37f47ca7343e569d11 100644 (file)
--- a/gcc/doc/tm.texi
+++ b/gcc/doc/tm.texi
@@ -5264,48 +5264,6 @@ These macros let you describe the relative speed of various operations
 on the target machine.
 
 @table @code
-@findex ADDRESS_COST
-@item ADDRESS_COST (@var{address})
-An expression giving the cost of an addressing mode that contains
-@var{address}.  If not defined, the cost is computed from
-the @var{address} expression and the @code{CONST_COSTS} values.
-
-For most CISC machines, the default cost is a good approximation of the
-true cost of the addressing mode.  However, on RISC machines, all
-instructions normally have the same length and execution time.  Hence
-all addresses will have equal costs.
-
-In cases where more than one form of an address is known, the form with
-the lowest cost will be used.  If multiple forms have the same, lowest,
-cost, the one that is the most complex will be used.
-
-For example, suppose an address that is equal to the sum of a register
-and a constant is used twice in the same basic block.  When this macro
-is not defined, the address will be computed in a register and memory
-references will be indirect through that register.  On machines where
-the cost of the addressing mode containing the sum is no higher than
-that of a simple indirect reference, this will produce an additional
-instruction and possibly require an additional register.  Proper
-specification of this macro eliminates this overhead for such machines.
-
-Similar use of this macro is made in strength reduction of loops.
-
-@var{address} need not be valid as an address.  In such a case, the cost
-is not relevant and can be any value; invalid addresses need not be
-assigned a different cost.
-
-On machines where an address involving more than one register is as
-cheap as an address computation involving only one register, defining
-@code{ADDRESS_COST} to reflect this can cause two registers to be live
-over a region of code where only one would have been if
-@code{ADDRESS_COST} were not defined in that manner.  This effect should
-be considered in the definition of this macro.  Equivalent costs should
-probably only be given to addresses with different numbers of registers
-on machines with lots of registers.
-
-This macro will normally either not be defined or be defined as a
-constant.
-
 @findex REGISTER_MOVE_COST
 @item REGISTER_MOVE_COST (@var{mode}, @var{from}, @var{to})
 A C expression for the cost of moving data of mode @var{mode} from a
@@ -5529,6 +5487,41 @@ The hook returns true when all subexpressions of @var{x} have been
 processed, and false when @code{rtx_cost} should recurse.
 @end deftypefn
 
+@deftypefn {Target Hook} int TARGET_ADDRESS_COST (rtx @var{address})
+This hook computes the cost of an addressing mode that contains
+@var{address}.  If not defined, the cost is computed from
+the @var{address} expression and the @code{TARGET_RTX_COST} hook.
+
+For most CISC machines, the default cost is a good approximation of the
+true cost of the addressing mode.  However, on RISC machines, all
+instructions normally have the same length and execution time.  Hence
+all addresses will have equal costs.
+
+In cases where more than one form of an address is known, the form with
+the lowest cost will be used.  If multiple forms have the same, lowest,
+cost, the one that is the most complex will be used.
+
+For example, suppose an address that is equal to the sum of a register
+and a constant is used twice in the same basic block.  When this macro
+is not defined, the address will be computed in a register and memory
+references will be indirect through that register.  On machines where
+the cost of the addressing mode containing the sum is no higher than
+that of a simple indirect reference, this will produce an additional
+instruction and possibly require an additional register.  Proper
+specification of this macro eliminates this overhead for such machines.
+
+This hook is never called with an invalid address.
+
+On machines where an address involving more than one register is as
+cheap as an address computation involving only one register, defining
+@code{TARGET_ADDRESS_COST} to reflect this can cause two registers to
+be live over a region of code where only one would have been if
+@code{TARGET_ADDRESS_COST} were not defined in that manner.  This effect
+should be considered in the definition of this macro.  Equivalent costs
+should probably only be given to addresses with different numbers of
+registers on machines with lots of registers.
+@end deftypefn
+
 @node Scheduling
 @section Adjusting the Instruction Scheduler