/* Optimize by combining instructions for GNU compiler.
Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
This file is part of GCC.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
/* This module is essentially the "combiner" phase of the U. of Arizona
Portable Optimizer, but redone to work on our list-structured
flow.c aren't completely updated:
- reg_live_length is not updated
+ - reg_n_refs is not adjusted in the rare case when a register is
+ no longer required in a computation
+ - there are extremely rare cases (see distribute_regnotes) when a
+ REG_DEAD note is lost
- a LOG_LINKS entry that refers to an insn with multiple SETs may be
removed because there is no way to know which register it was
linking
#include "real.h"
#include "toplev.h"
#include "target.h"
+#include "optabs.h"
+#include "insn-codes.h"
#include "rtlhooks-def.h"
+/* Include output.h for dump_file. */
+#include "output.h"
+#include "params.h"
+#include "timevar.h"
+#include "tree-pass.h"
/* Number of attempts to combine instructions in this function. */
int last_set_label;
/* These fields are maintained in parallel with last_set_value and are
- used to store the mode in which the register was last set, te bits
+ used to store the mode in which the register was last set, the bits
that were known to be zero when it was last set, and the number of
sign bits copies it was known to have when it was last set. */
those blocks as starting points. */
static sbitmap refresh_blocks;
\f
+/* The following array records the insn_rtx_cost for every insn
+ in the instruction stream. */
+
+static int *uid_insn_cost;
+
+/* Length of the currently allocated uid_insn_cost array. */
+
+static int last_insn_cost;
+
/* Incremented for each label. */
static int label_tick;
static int rtx_equal_for_field_assignment_p (rtx, rtx);
static rtx make_field_assignment (rtx);
static rtx apply_distributive_law (rtx);
+static rtx distribute_and_simplify_rtx (rtx, int);
static rtx simplify_and_const_int (rtx, enum machine_mode, rtx,
unsigned HOST_WIDE_INT);
static int merge_outer_ops (enum rtx_code *, HOST_WIDE_INT *, enum rtx_code,
int);
static int recog_for_combine (rtx *, rtx, rtx *);
static rtx gen_lowpart_for_combine (enum machine_mode, rtx);
-static rtx gen_binary (enum rtx_code, enum machine_mode, rtx, rtx);
static enum rtx_code simplify_comparison (enum rtx_code, rtx *, rtx *);
static void update_table_tick (rtx);
static void record_value_for_reg (rtx, rtx, rtx);
static int reg_dead_at_p (rtx, rtx);
static void move_deaths (rtx, rtx, int, rtx, rtx *);
static int reg_bitfield_target_p (rtx, rtx);
-static void distribute_notes (rtx, rtx, rtx, rtx);
+static void distribute_notes (rtx, rtx, rtx, rtx, rtx, rtx);
static void distribute_links (rtx);
static void mark_used_regs_combine (rtx);
static int insn_cuid (rtx);
static void record_promoted_value (rtx, rtx);
-static rtx reversed_comparison (rtx, enum machine_mode, rtx, rtx);
-static enum rtx_code combine_reversed_comparison_code (rtx);
static int unmentioned_reg_p_1 (rtx *, void *);
static bool unmentioned_reg_p (rtx, rtx);
\f
#undef RTL_HOOKS_GEN_LOWPART
#define RTL_HOOKS_GEN_LOWPART gen_lowpart_for_combine
+/* Our implementation of gen_lowpart never emits a new pseudo. */
+#undef RTL_HOOKS_GEN_LOWPART_NO_EMIT
+#define RTL_HOOKS_GEN_LOWPART_NO_EMIT gen_lowpart_for_combine
+
#undef RTL_HOOKS_REG_NONZERO_REG_BITS
#define RTL_HOOKS_REG_NONZERO_REG_BITS reg_nonzero_bits_for_combine
{
/* Sanity check that we're replacing oldval with a CONST_INT
that is a valid sign-extension for the original mode. */
- if (INTVAL (newval) != trunc_int_for_mode (INTVAL (newval),
- GET_MODE (oldval)))
- abort ();
+ gcc_assert (INTVAL (newval)
+ == trunc_int_for_mode (INTVAL (newval), GET_MODE (oldval)));
/* Replacing the operand of a SUBREG or a ZERO_EXTEND with a
CONST_INT is not valid, because after the replacement, the
when do_SUBST is called to replace the operand thereof, so we
perform this test on oldval instead, checking whether an
invalid replacement took place before we got here. */
- if ((GET_CODE (oldval) == SUBREG
- && GET_CODE (SUBREG_REG (oldval)) == CONST_INT)
- || (GET_CODE (oldval) == ZERO_EXTEND
- && GET_CODE (XEXP (oldval, 0)) == CONST_INT))
- abort ();
+ gcc_assert (!(GET_CODE (oldval) == SUBREG
+ && GET_CODE (SUBREG_REG (oldval)) == CONST_INT));
+ gcc_assert (!(GET_CODE (oldval) == ZERO_EXTEND
+ && GET_CODE (XEXP (oldval, 0)) == CONST_INT));
}
if (undobuf.frees)
#define SUBST_INT(INTO, NEWVAL) do_SUBST_INT(&(INTO), (NEWVAL))
\f
+/* Subroutine of try_combine. Determine whether the combine replacement
+ patterns NEWPAT and NEWI2PAT are cheaper according to insn_rtx_cost
+ that the original instruction sequence I1, I2 and I3. Note that I1
+ and/or NEWI2PAT may be NULL_RTX. This function returns false, if the
+ costs of all instructions can be estimated, and the replacements are
+ more expensive than the original sequence. */
+
+static bool
+combine_validate_cost (rtx i1, rtx i2, rtx i3, rtx newpat, rtx newi2pat)
+{
+ int i1_cost, i2_cost, i3_cost;
+ int new_i2_cost, new_i3_cost;
+ int old_cost, new_cost;
+
+ /* Lookup the original insn_rtx_costs. */
+ i2_cost = INSN_UID (i2) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (i2)] : 0;
+ i3_cost = INSN_UID (i3) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (i3)] : 0;
+
+ if (i1)
+ {
+ i1_cost = INSN_UID (i1) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (i1)] : 0;
+ old_cost = (i1_cost > 0 && i2_cost > 0 && i3_cost > 0)
+ ? i1_cost + i2_cost + i3_cost : 0;
+ }
+ else
+ {
+ old_cost = (i2_cost > 0 && i3_cost > 0) ? i2_cost + i3_cost : 0;
+ i1_cost = 0;
+ }
+
+ /* Calculate the replacement insn_rtx_costs. */
+ new_i3_cost = insn_rtx_cost (newpat);
+ if (newi2pat)
+ {
+ new_i2_cost = insn_rtx_cost (newi2pat);
+ new_cost = (new_i2_cost > 0 && new_i3_cost > 0)
+ ? new_i2_cost + new_i3_cost : 0;
+ }
+ else
+ {
+ new_cost = new_i3_cost;
+ new_i2_cost = 0;
+ }
+
+ if (undobuf.other_insn)
+ {
+ int old_other_cost, new_other_cost;
+
+ old_other_cost = (INSN_UID (undobuf.other_insn) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (undobuf.other_insn)] : 0);
+ new_other_cost = insn_rtx_cost (PATTERN (undobuf.other_insn));
+ if (old_other_cost > 0 && new_other_cost > 0)
+ {
+ old_cost += old_other_cost;
+ new_cost += new_other_cost;
+ }
+ else
+ old_cost = 0;
+ }
+
+ /* Disallow this recombination if both new_cost and old_cost are
+ greater than zero, and new_cost is greater than old cost. */
+ if (old_cost > 0
+ && new_cost > old_cost)
+ {
+ if (dump_file)
+ {
+ if (i1)
+ {
+ fprintf (dump_file,
+ "rejecting combination of insns %d, %d and %d\n",
+ INSN_UID (i1), INSN_UID (i2), INSN_UID (i3));
+ fprintf (dump_file, "original costs %d + %d + %d = %d\n",
+ i1_cost, i2_cost, i3_cost, old_cost);
+ }
+ else
+ {
+ fprintf (dump_file,
+ "rejecting combination of insns %d and %d\n",
+ INSN_UID (i2), INSN_UID (i3));
+ fprintf (dump_file, "original costs %d + %d = %d\n",
+ i2_cost, i3_cost, old_cost);
+ }
+
+ if (newi2pat)
+ {
+ fprintf (dump_file, "replacement costs %d + %d = %d\n",
+ new_i2_cost, new_i3_cost, new_cost);
+ }
+ else
+ fprintf (dump_file, "replacement cost %d\n", new_cost);
+ }
+
+ return false;
+ }
+
+ /* Update the uid_insn_cost array with the replacement costs. */
+ uid_insn_cost[INSN_UID (i2)] = new_i2_cost;
+ uid_insn_cost[INSN_UID (i3)] = new_i3_cost;
+ if (i1)
+ uid_insn_cost[INSN_UID (i1)] = 0;
+
+ return true;
+}
+\f
/* Main entry point for combiner. F is the first insn of the function.
NREGS is the first unused pseudo-reg number.
rtx prev;
#endif
int i;
+ unsigned int j = 0;
rtx links, nextlinks;
+ sbitmap_iterator sbi;
int new_direct_jump_p = 0;
refresh_blocks = sbitmap_alloc (last_basic_block);
sbitmap_zero (refresh_blocks);
+ /* Allocate array of current insn_rtx_costs. */
+ uid_insn_cost = xcalloc (max_uid_cuid + 1, sizeof (int));
+ last_insn_cost = max_uid_cuid;
+
for (insn = f, i = 0; insn; insn = NEXT_INSN (insn))
{
uid_cuid[INSN_UID (insn)] = ++i;
set_nonzero_bits_and_sign_copies (XEXP (links, 0), NULL_RTX,
NULL);
#endif
+
+ /* Record the current insn_rtx_cost of this instruction. */
+ if (NONJUMP_INSN_P (insn))
+ uid_insn_cost[INSN_UID (insn)] = insn_rtx_cost (PATTERN (insn));
+ if (dump_file)
+ fprintf(dump_file, "insn_cost %d: %d\n",
+ INSN_UID (insn), uid_insn_cost[INSN_UID (insn)]);
}
- if (GET_CODE (insn) == CODE_LABEL)
+ if (LABEL_P (insn))
label_tick++;
}
{
next = 0;
- if (GET_CODE (insn) == CODE_LABEL)
+ if (LABEL_P (insn))
label_tick++;
else if (INSN_P (insn))
/* If the linked insn has been replaced by a note, then there
is no point in pursuing this chain any further. */
- if (GET_CODE (link) == NOTE)
+ if (NOTE_P (link))
continue;
for (nextlinks = LOG_LINKS (link);
We need this special code because data flow connections
via CC0 do not get entered in LOG_LINKS. */
- if (GET_CODE (insn) == JUMP_INSN
+ if (JUMP_P (insn)
&& (prev = prev_nonnote_insn (insn)) != 0
- && GET_CODE (prev) == INSN
+ && NONJUMP_INSN_P (prev)
&& sets_cc0_p (PATTERN (prev)))
{
if ((next = try_combine (insn, prev,
}
/* Do the same for an insn that explicitly references CC0. */
- if (GET_CODE (insn) == INSN
+ if (NONJUMP_INSN_P (insn)
&& (prev = prev_nonnote_insn (insn)) != 0
- && GET_CODE (prev) == INSN
+ && NONJUMP_INSN_P (prev)
&& sets_cc0_p (PATTERN (prev))
&& GET_CODE (PATTERN (insn)) == SET
&& reg_mentioned_p (cc0_rtx, SET_SRC (PATTERN (insn))))
explicitly references CC0. If so, try this insn, that insn,
and its predecessor if it sets CC0. */
for (links = LOG_LINKS (insn); links; links = XEXP (links, 1))
- if (GET_CODE (XEXP (links, 0)) == INSN
+ if (NONJUMP_INSN_P (XEXP (links, 0))
&& GET_CODE (PATTERN (XEXP (links, 0))) == SET
&& reg_mentioned_p (cc0_rtx, SET_SRC (PATTERN (XEXP (links, 0))))
&& (prev = prev_nonnote_insn (XEXP (links, 0))) != 0
- && GET_CODE (prev) == INSN
+ && NONJUMP_INSN_P (prev)
&& sets_cc0_p (PATTERN (prev))
&& (next = try_combine (insn, XEXP (links, 0),
prev, &new_direct_jump_p)) != 0)
rtx temp = XEXP (links, 0);
if ((set = single_set (temp)) != 0
&& (note = find_reg_equal_equiv_note (temp)) != 0
- && GET_CODE (XEXP (note, 0)) != EXPR_LIST
+ && (note = XEXP (note, 0), GET_CODE (note)) != EXPR_LIST
/* Avoid using a register that may already been marked
dead by an earlier instruction. */
- && ! unmentioned_reg_p (XEXP (note, 0), SET_SRC (set)))
+ && ! unmentioned_reg_p (note, SET_SRC (set))
+ && (GET_MODE (note) == VOIDmode
+ ? SCALAR_INT_MODE_P (GET_MODE (SET_DEST (set)))
+ : GET_MODE (SET_DEST (set)) == GET_MODE (note)))
{
/* Temporarily replace the set's source with the
contents of the REG_EQUAL note. The insn will
be deleted or recognized by try_combine. */
rtx orig = SET_SRC (set);
- SET_SRC (set) = XEXP (note, 0);
+ SET_SRC (set) = note;
next = try_combine (insn, temp, NULL_RTX,
&new_direct_jump_p);
if (next)
}
}
- if (GET_CODE (insn) != NOTE)
+ if (!NOTE_P (insn))
record_dead_and_set_regs (insn);
retry:
}
clear_bb_flags ();
- EXECUTE_IF_SET_IN_SBITMAP (refresh_blocks, 0, i,
- BASIC_BLOCK (i)->flags |= BB_DIRTY);
- new_direct_jump_p |= purge_all_dead_edges (0);
+ EXECUTE_IF_SET_IN_SBITMAP (refresh_blocks, 0, j, sbi)
+ BASIC_BLOCK (j)->flags |= BB_DIRTY;
+ new_direct_jump_p |= purge_all_dead_edges ();
delete_noop_moves ();
update_life_info_in_dirty_blocks (UPDATE_LIFE_GLOBAL_RM_NOTES,
/* Clean up. */
sbitmap_free (refresh_blocks);
+ free (uid_insn_cost);
free (reg_stat);
free (uid_cuid);
{
unsigned int num;
- if (GET_CODE (x) == REG
+ if (REG_P (x)
&& REGNO (x) >= FIRST_PSEUDO_REGISTER
/* If this register is undefined at the start of the file, we can't
say what its contents were. */
- && ! REGNO_REG_SET_P (ENTRY_BLOCK_PTR->next_bb->global_live_at_start, REGNO (x))
+ && ! REGNO_REG_SET_P
+ (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start, REGNO (x))
&& GET_MODE_BITSIZE (GET_MODE (x)) <= HOST_BITS_PER_WIDE_INT)
{
if (set == 0 || GET_CODE (set) == CLOBBER)
something to tell them apart, e.g. different modes. For
now, we forgo such complicated tests and simply disallow
combining of USES of pseudo registers with any other USE. */
- if (GET_CODE (XEXP (elt, 0)) == REG
+ if (REG_P (XEXP (elt, 0))
&& GET_CODE (PATTERN (i3)) == PARALLEL)
{
rtx i3pat = PATTERN (i3);
rtx i3elt = XVECEXP (i3pat, 0, i);
if (GET_CODE (i3elt) == USE
- && GET_CODE (XEXP (i3elt, 0)) == REG
+ && REG_P (XEXP (i3elt, 0))
&& (REGNO (XEXP (i3elt, 0)) == regno
? reg_set_between_p (XEXP (elt, 0),
PREV_INSN (insn), i3)
/* Can't merge a function call. */
|| GET_CODE (src) == CALL
/* Don't eliminate a function call argument. */
- || (GET_CODE (i3) == CALL_INSN
+ || (CALL_P (i3)
&& (find_reg_fusage (i3, USE, dest)
- || (GET_CODE (dest) == REG
+ || (REG_P (dest)
&& REGNO (dest) < FIRST_PSEUDO_REGISTER
&& global_regs[REGNO (dest)])))
/* Don't substitute into an incremented register. */
|| FIND_REG_INC_NOTE (i3, dest)
|| (succ && FIND_REG_INC_NOTE (succ, dest))
+ /* Don't substitute into a non-local goto, this confuses CFG. */
+ || (JUMP_P (i3) && find_reg_note (i3, REG_NON_LOCAL_GOTO, NULL_RTX))
#if 0
/* Don't combine the end of a libcall into anything. */
/* ??? This gives worse code, and appears to be unnecessary, since no
are intervening stores. Also, don't move a volatile asm or
UNSPEC_VOLATILE across any other insns. */
|| (! all_adjacent
- && (((GET_CODE (src) != MEM
+ && (((!MEM_P (src)
|| ! find_reg_note (insn, REG_EQUIV, src))
&& use_crosses_set_p (src, INSN_CUID (insn)))
|| (GET_CODE (src) == ASM_OPERANDS && MEM_VOLATILE_P (src))
return 0;
/* DEST must either be a REG or CC0. */
- if (GET_CODE (dest) == REG)
+ if (REG_P (dest))
{
/* If register alignment is being enforced for multi-word items in all
cases except for parameters, it is possible to have a register copy
Also, on some machines we don't want to extend the life of a hard
register. */
- if (GET_CODE (src) == REG
+ if (REG_P (src)
&& ((REGNO (dest) < FIRST_PSEUDO_REGISTER
&& ! HARD_REGNO_MODE_OK (REGNO (dest), GET_MODE (dest)))
/* Don't extend the life of a hard register unless it is
else if (GET_CODE (dest) != CC0)
return 0;
- /* Don't substitute for a register intended as a clobberable operand.
- Similarly, don't substitute an expression containing a register that
- will be clobbered in I3. */
+
if (GET_CODE (PATTERN (i3)) == PARALLEL)
for (i = XVECLEN (PATTERN (i3), 0) - 1; i >= 0; i--)
- if (GET_CODE (XVECEXP (PATTERN (i3), 0, i)) == CLOBBER
- && (reg_overlap_mentioned_p (XEXP (XVECEXP (PATTERN (i3), 0, i), 0),
- src)
- || rtx_equal_p (XEXP (XVECEXP (PATTERN (i3), 0, i), 0), dest)))
- return 0;
+ if (GET_CODE (XVECEXP (PATTERN (i3), 0, i)) == CLOBBER)
+ {
+ /* Don't substitute for a register intended as a clobberable
+ operand. */
+ rtx reg = XEXP (XVECEXP (PATTERN (i3), 0, i), 0);
+ if (rtx_equal_p (reg, dest))
+ return 0;
+
+ /* If the clobber represents an earlyclobber operand, we must not
+ substitute an expression containing the clobbered register.
+ As we do not analyze the constraint strings here, we have to
+ make the conservative assumption. However, if the register is
+ a fixed hard reg, the clobber cannot represent any operand;
+ we leave it up to the machine description to either accept or
+ reject use-and-clobber patterns. */
+ if (!REG_P (reg)
+ || REGNO (reg) >= FIRST_PSEUDO_REGISTER
+ || !fixed_regs[REGNO (reg)])
+ if (reg_overlap_mentioned_p (reg, src))
+ return 0;
+ }
/* If INSN contains anything volatile, or is an `asm' (whether volatile
or not), reject, unless nothing volatile comes between it and I3 */
to be an explicit register variable, and was chosen for a reason. */
if (GET_CODE (src) == ASM_OPERANDS
- && GET_CODE (dest) == REG && REGNO (dest) < FIRST_PSEUDO_REGISTER)
+ && REG_P (dest) && REGNO (dest) < FIRST_PSEUDO_REGISTER)
return 0;
/* If there are any volatile insns between INSN and I3, reject, because
if (INSN_P (p) && p != succ && volatile_insn_p (PATTERN (p)))
return 0;
- /* If INSN or I2 contains an autoincrement or autodecrement,
- make sure that register is not used between there and I3,
- and not already used in I3 either.
+ /* If INSN contains an autoincrement or autodecrement, make sure that
+ register is not used between there and I3, and not already used in
+ I3 either. Neither must it be used in PRED or SUCC, if they exist.
Also insist that I3 not be a jump; if it were one
and the incremented register were spilled, we would lose. */
#ifdef AUTO_INC_DEC
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
if (REG_NOTE_KIND (link) == REG_INC
- && (GET_CODE (i3) == JUMP_INSN
+ && (JUMP_P (i3)
|| reg_used_between_p (XEXP (link, 0), insn, i3)
+ || (pred != NULL_RTX
+ && reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (pred)))
+ || (succ != NULL_RTX
+ && reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (succ)))
|| reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (i3))))
return 0;
#endif
but that would be much slower, and this ought to be equivalent. */
p = prev_nonnote_insn (insn);
- if (p && p != pred && GET_CODE (p) == INSN && sets_cc0_p (PATTERN (p))
+ if (p && p != pred && NONJUMP_INSN_P (p) && sets_cc0_p (PATTERN (p))
&& ! all_adjacent)
return 0;
#endif
into the address of a MEM, so only prevent the combination if
i1 or i2 set the same MEM. */
if ((inner_dest != dest &&
- (GET_CODE (inner_dest) != MEM
+ (!MEM_P (inner_dest)
|| rtx_equal_p (i2dest, inner_dest)
|| (i1dest && rtx_equal_p (i1dest, inner_dest)))
&& (reg_overlap_mentioned_p (i2dest, inner_dest)
function argument; the all_adjacent test in can_combine_p also
checks this; here, we do a more specific test for this case. */
- || (GET_CODE (inner_dest) == REG
+ || (REG_P (inner_dest)
&& REGNO (inner_dest) < FIRST_PSEUDO_REGISTER
&& (! HARD_REGNO_MODE_OK (REGNO (inner_dest),
GET_MODE (inner_dest))))
Never add REG_DEAD notes for the FRAME_POINTER_REGNUM or the
STACK_POINTER_REGNUM, since these are always considered to be
live. Similarly for ARG_POINTER_REGNUM if it is fixed. */
- if (pi3dest_killed && GET_CODE (dest) == REG
+ if (pi3dest_killed && REG_P (dest)
&& reg_referenced_p (dest, PATTERN (i3))
&& REGNO (dest) != FRAME_POINTER_REGNUM
#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
/* Never combine loads and stores involving hard regs that are likely
to be spilled. The register allocator can usually handle such
reg-reg moves by tying. If we allow the combiner to make
- substitutions of likely-spilled regs, we may abort in reload.
+ substitutions of likely-spilled regs, reload might die.
As an exception, we allow combinations involving fixed regs; these are
not available to the register allocator so there's no risk involved. */
return 0;
}
+struct likely_spilled_retval_info
+{
+ unsigned regno, nregs;
+ unsigned mask;
+};
+
+/* Called via note_stores by likely_spilled_retval_p. Remove from info->mask
+ hard registers that are known to be written to / clobbered in full. */
+static void
+likely_spilled_retval_1 (rtx x, rtx set, void *data)
+{
+ struct likely_spilled_retval_info *info = data;
+ unsigned regno, nregs;
+ unsigned new_mask;
+
+ if (!REG_P (XEXP (set, 0)))
+ return;
+ regno = REGNO (x);
+ if (regno >= info->regno + info->nregs)
+ return;
+ nregs = hard_regno_nregs[regno][GET_MODE (x)];
+ if (regno + nregs <= info->regno)
+ return;
+ new_mask = (2U << (nregs - 1)) - 1;
+ if (regno < info->regno)
+ new_mask >>= info->regno - regno;
+ else
+ new_mask <<= regno - info->regno;
+ info->mask &= new_mask;
+}
+
+/* Return nonzero iff part of the return value is live during INSN, and
+ it is likely spilled. This can happen when more than one insn is needed
+ to copy the return value, e.g. when we consider to combine into the
+ second copy insn for a complex value. */
+
+static int
+likely_spilled_retval_p (rtx insn)
+{
+ rtx use = BB_END (this_basic_block);
+ rtx reg, p;
+ unsigned regno, nregs;
+ /* We assume here that no machine mode needs more than
+ 32 hard registers when the value overlaps with a register
+ for which FUNCTION_VALUE_REGNO_P is true. */
+ unsigned mask;
+ struct likely_spilled_retval_info info;
+
+ if (!NONJUMP_INSN_P (use) || GET_CODE (PATTERN (use)) != USE || insn == use)
+ return 0;
+ reg = XEXP (PATTERN (use), 0);
+ if (!REG_P (reg) || !FUNCTION_VALUE_REGNO_P (REGNO (reg)))
+ return 0;
+ regno = REGNO (reg);
+ nregs = hard_regno_nregs[regno][GET_MODE (reg)];
+ if (nregs == 1)
+ return 0;
+ mask = (2U << (nregs - 1)) - 1;
+
+ /* Disregard parts of the return value that are set later. */
+ info.regno = regno;
+ info.nregs = nregs;
+ info.mask = mask;
+ for (p = PREV_INSN (use); info.mask && p != insn; p = PREV_INSN (p))
+ note_stores (PATTERN (insn), likely_spilled_retval_1, &info);
+ mask = info.mask;
+
+ /* Check if any of the (probably) live return value registers is
+ likely spilled. */
+ nregs --;
+ do
+ {
+ if ((mask & 1 << nregs)
+ && CLASS_LIKELY_SPILLED_P (REGNO_REG_CLASS (regno + nregs)))
+ return 1;
+ } while (nregs--);
+ return 0;
+}
+
/* Adjust INSN after we made a change to its destination.
Changing the destination can invalidate notes that say something about
distribute_links (gen_rtx_INSN_LIST (VOIDmode, insn, NULL_RTX));
}
+/* Return TRUE if combine can reuse reg X in mode MODE.
+ ADDED_SETS is nonzero if the original set is still required. */
+static bool
+can_change_dest_mode (rtx x, int added_sets, enum machine_mode mode)
+{
+ unsigned int regno;
+
+ if (!REG_P(x))
+ return false;
+
+ regno = REGNO (x);
+ /* Allow hard registers if the new mode is legal, and occupies no more
+ registers than the old mode. */
+ if (regno < FIRST_PSEUDO_REGISTER)
+ return (HARD_REGNO_MODE_OK (regno, mode)
+ && (hard_regno_nregs[regno][GET_MODE (x)]
+ >= hard_regno_nregs[regno][mode]));
+
+ /* Or a pseudo that is only used once. */
+ return (REG_N_SETS (regno) == 1 && !added_sets
+ && !REG_USERVAR_P (x));
+}
+
/* Try to combine the insns I1 and I2 into I3.
Here I1 and I2 appear earlier than I3.
I1 can be zero; then we combine just I2 into I3.
{
/* New patterns for I3 and I2, respectively. */
rtx newpat, newi2pat = 0;
+ rtvec newpat_vec_with_clobbers = 0;
int substed_i2 = 0, substed_i1 = 0;
/* Indicates need to preserve SET in I1 or I2 in I3 if it is not dead. */
int added_sets_1, added_sets_2;
rtx i2pat;
/* Indicates if I2DEST or I1DEST is in I2SRC or I1_SRC. */
int i2dest_in_i2src = 0, i1dest_in_i1src = 0, i2dest_in_i1src = 0;
+ int i2dest_killed = 0, i1dest_killed = 0;
int i1_feeds_i3 = 0;
/* Notes that must be added to REG_NOTES in I3 and I2. */
rtx new_i3_notes, new_i2_notes;
int i3_subst_into_i2 = 0;
/* Notes that I1, I2 or I3 is a MULT operation. */
int have_mult = 0;
+ int swap_i2i3 = 0;
int maxreg;
rtx temp;
if (cant_combine_insn_p (i3)
|| cant_combine_insn_p (i2)
|| (i1 && cant_combine_insn_p (i1))
+ || likely_spilled_retval_p (i3)
/* We also can't do anything if I3 has a
REG_LIBCALL note since we don't want to disrupt the contiguity of a
libcall. */
where I2 and I3 are adjacent to avoid making difficult register
usage tests. */
- if (i1 == 0 && GET_CODE (i3) == INSN && GET_CODE (PATTERN (i3)) == SET
- && GET_CODE (SET_SRC (PATTERN (i3))) == REG
+ if (i1 == 0 && NONJUMP_INSN_P (i3) && GET_CODE (PATTERN (i3)) == SET
+ && REG_P (SET_SRC (PATTERN (i3)))
&& REGNO (SET_SRC (PATTERN (i3))) >= FIRST_PSEUDO_REGISTER
&& find_reg_note (i3, REG_DEAD, SET_SRC (PATTERN (i3)))
&& GET_CODE (PATTERN (i2)) == PARALLEL
added_sets_2 = added_sets_1 = 0;
i2dest = SET_SRC (PATTERN (i3));
+ i2dest_killed = dead_or_set_p (i2, i2dest);
/* Replace the dest in I2 with our dest and make the resulting
insn the new pattern for I3. Then skip to where we
&& (temp = single_set (i2)) != 0
&& (GET_CODE (SET_SRC (temp)) == CONST_INT
|| GET_CODE (SET_SRC (temp)) == CONST_DOUBLE)
- && GET_CODE (SET_DEST (temp)) == REG
+ && REG_P (SET_DEST (temp))
&& GET_MODE_CLASS (GET_MODE (SET_DEST (temp))) == MODE_INT
&& GET_MODE_SIZE (GET_MODE (SET_DEST (temp))) == 2 * UNITS_PER_WORD
&& GET_CODE (PATTERN (i3)) == SET
{
/* We don't handle the case of the target word being wider
than a host wide int. */
- if (HOST_BITS_PER_WIDE_INT < BITS_PER_WORD)
- abort ();
+ gcc_assert (HOST_BITS_PER_WIDE_INT >= BITS_PER_WORD);
lo &= ~(UWIDE_SHIFT_LEFT_BY_BITS_PER_WORD (1) - 1);
lo |= (INTVAL (SET_SRC (PATTERN (i3)))
else
/* We don't handle the case of the higher word not fitting
entirely in either hi or lo. */
- abort ();
+ gcc_unreachable ();
combine_merges++;
subst_insn = i3;
subst_low_cuid = INSN_CUID (i2);
added_sets_2 = added_sets_1 = 0;
i2dest = SET_DEST (temp);
+ i2dest_killed = dead_or_set_p (i2, i2dest);
SUBST (SET_SRC (temp),
immed_double_const (lo, hi, GET_MODE (SET_DEST (temp))));
&& GET_CODE (SET_SRC (XVECEXP (PATTERN (i2), 0, 0))) == COMPARE
&& XEXP (SET_SRC (XVECEXP (PATTERN (i2), 0, 0)), 1) == const0_rtx
&& GET_CODE (XVECEXP (PATTERN (i2), 0, 1)) == SET
- && GET_CODE (SET_DEST (XVECEXP (PATTERN (i2), 0, 1))) == REG
+ && REG_P (SET_DEST (XVECEXP (PATTERN (i2), 0, 1)))
&& rtx_equal_p (XEXP (SET_SRC (XVECEXP (PATTERN (i2), 0, 0)), 0),
SET_SRC (XVECEXP (PATTERN (i2), 0, 1))))
{
i2dest_in_i2src = reg_overlap_mentioned_p (i2dest, i2src);
i1dest_in_i1src = i1 && reg_overlap_mentioned_p (i1dest, i1src);
i2dest_in_i1src = i1 && reg_overlap_mentioned_p (i2dest, i1src);
+ i2dest_killed = dead_or_set_p (i2, i2dest);
+ i1dest_killed = i1 && dead_or_set_p (i1, i1dest);
/* See if I1 directly feeds into I3. It does if I1DEST is not used
in I2SRC. */
#if 0
if (!(GET_CODE (PATTERN (i3)) == SET
- && GET_CODE (SET_SRC (PATTERN (i3))) == REG
- && GET_CODE (SET_DEST (PATTERN (i3))) == MEM
+ && REG_P (SET_SRC (PATTERN (i3)))
+ && MEM_P (SET_DEST (PATTERN (i3)))
&& (GET_CODE (XEXP (SET_DEST (PATTERN (i3)), 0)) == POST_INC
|| GET_CODE (XEXP (SET_DEST (PATTERN (i3)), 0)) == POST_DEC)))
/* It's not the exception. */
subst_insn = i3;
- /* It is possible that the source of I2 or I1 may be performing an
- unneeded operation, such as a ZERO_EXTEND of something that is known
- to have the high part zero. Handle that case by letting subst look at
- the innermost one of them.
-
- Another way to do this would be to have a function that tries to
- simplify a single insn instead of merging two or more insns. We don't
- do this because of the potential of infinite loops and because
- of the potential extra memory required. However, doing it the way
- we are is a bit of a kludge and doesn't catch all cases.
-
- But only do this if -fexpensive-optimizations since it slows things down
- and doesn't usually win. */
-
- if (flag_expensive_optimizations)
- {
- /* Pass pc_rtx so no substitutions are done, just simplifications. */
- if (i1)
- {
- subst_low_cuid = INSN_CUID (i1);
- i1src = subst (i1src, pc_rtx, pc_rtx, 0, 0);
- }
- else
- {
- subst_low_cuid = INSN_CUID (i2);
- i2src = subst (i2src, pc_rtx, pc_rtx, 0, 0);
- }
- }
-
#ifndef HAVE_cc0
/* Many machines that don't use CC0 have insns that can both perform an
arithmetic operation and set the condition code. These operations will
i2src, const0_rtx))
!= GET_MODE (SET_DEST (newpat))))
{
- unsigned int regno = REGNO (SET_DEST (newpat));
- rtx new_dest = gen_rtx_REG (compare_mode, regno);
-
- if (regno < FIRST_PSEUDO_REGISTER
- || (REG_N_SETS (regno) == 1 && ! added_sets_2
- && ! REG_USERVAR_P (SET_DEST (newpat))))
+ if (can_change_dest_mode(SET_DEST (newpat), added_sets_2,
+ compare_mode))
{
+ unsigned int regno = REGNO (SET_DEST (newpat));
+ rtx new_dest = gen_rtx_REG (compare_mode, regno);
+
if (regno >= FIRST_PSEUDO_REGISTER)
SUBST (regno_reg_rtx[regno], new_dest);
else
#endif
{
+ /* It is possible that the source of I2 or I1 may be performing
+ an unneeded operation, such as a ZERO_EXTEND of something
+ that is known to have the high part zero. Handle that case
+ by letting subst look at the innermost one of them.
+
+ Another way to do this would be to have a function that tries
+ to simplify a single insn instead of merging two or more
+ insns. We don't do this because of the potential of infinite
+ loops and because of the potential extra memory required.
+ However, doing it the way we are is a bit of a kludge and
+ doesn't catch all cases.
+
+ But only do this if -fexpensive-optimizations since it slows
+ things down and doesn't usually win.
+
+ This is not done in the COMPARE case above because the
+ unmodified I2PAT is used in the PARALLEL and so a pattern
+ with a modified I2SRC would not match. */
+
+ if (flag_expensive_optimizations)
+ {
+ /* Pass pc_rtx so no substitutions are done, just
+ simplifications. */
+ if (i1)
+ {
+ subst_low_cuid = INSN_CUID (i1);
+ i1src = subst (i1src, pc_rtx, pc_rtx, 0, 0);
+ }
+ else
+ {
+ subst_low_cuid = INSN_CUID (i2);
+ i2src = subst (i2src, pc_rtx, pc_rtx, 0, 0);
+ }
+ }
+
n_occurrences = 0; /* `subst' counts here */
/* If I1 feeds into I2 (not into I3) and I1DEST is in I1SRC, we
|| (i1 != 0 && FIND_REG_INC_NOTE (i1, NULL_RTX) != 0
&& (n_occurrences + added_sets_1 + (added_sets_2 && ! i1_feeds_i3)
> 1))
- /* Fail if we tried to make a new register (we used to abort, but there's
- really no reason to). */
+ /* Fail if we tried to make a new register. */
|| max_reg_num () != maxreg
/* Fail if we couldn't do something and have a CLOBBER. */
|| GET_CODE (newpat) == CLOBBER
/* Note which hard regs this insn has as inputs. */
mark_used_regs_combine (newpat);
+ /* If recog_for_combine fails, it strips existing clobbers. If we'll
+ consider splitting this pattern, we might need these clobbers. */
+ if (i1 && GET_CODE (newpat) == PARALLEL
+ && GET_CODE (XVECEXP (newpat, 0, XVECLEN (newpat, 0) - 1)) == CLOBBER)
+ {
+ int len = XVECLEN (newpat, 0);
+
+ newpat_vec_with_clobbers = rtvec_alloc (len);
+ for (i = 0; i < len; i++)
+ RTVEC_ELT (newpat_vec_with_clobbers, i) = XVECEXP (newpat, 0, i);
+ }
+
/* Is the result of combination a valid instruction? */
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
rtx set1 = XVECEXP (newpat, 0, 1);
rtx note;
- if (((GET_CODE (SET_DEST (set1)) == REG
+ if (((REG_P (SET_DEST (set1))
&& find_reg_note (i3, REG_UNUSED, SET_DEST (set1)))
|| (GET_CODE (SET_DEST (set1)) == SUBREG
&& find_reg_note (i3, REG_UNUSED, SUBREG_REG (SET_DEST (set1)))))
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
}
- else if (((GET_CODE (SET_DEST (set0)) == REG
+ else if (((REG_P (SET_DEST (set0))
&& find_reg_note (i3, REG_UNUSED, SET_DEST (set0)))
|| (GET_CODE (SET_DEST (set0)) == SUBREG
&& find_reg_note (i3, REG_UNUSED,
if (m_split == 0 && ! reg_overlap_mentioned_p (ni2dest, newpat))
{
+ enum machine_mode new_mode = GET_MODE (SET_DEST (newpat));
/* If I2DEST is a hard register or the only use of a pseudo,
we can change its mode. */
- if (GET_MODE (SET_DEST (newpat)) != GET_MODE (i2dest)
- && GET_MODE (SET_DEST (newpat)) != VOIDmode
- && GET_CODE (i2dest) == REG
- && (REGNO (i2dest) < FIRST_PSEUDO_REGISTER
- || (REG_N_SETS (REGNO (i2dest)) == 1 && ! added_sets_2
- && ! REG_USERVAR_P (i2dest))))
+ if (new_mode != GET_MODE (i2dest)
+ && new_mode != VOIDmode
+ && can_change_dest_mode (i2dest, added_sets_2, new_mode))
ni2dest = gen_rtx_REG (GET_MODE (SET_DEST (newpat)),
REGNO (i2dest));
}
}
+ /* If recog_for_combine has discarded clobbers, try to use them
+ again for the split. */
+ if (m_split == 0 && newpat_vec_with_clobbers)
+ m_split
+ = split_insns (gen_rtx_PARALLEL (VOIDmode,
+ newpat_vec_with_clobbers), i3);
+
if (m_split && NEXT_INSN (m_split) == NULL_RTX)
{
m_split = PATTERN (m_split);
|| GET_CODE (new_i2_dest) == SUBREG)
new_i2_dest = XEXP (new_i2_dest, 0);
- if (GET_CODE (new_i3_dest) == REG
- && GET_CODE (new_i2_dest) == REG
+ if (REG_P (new_i3_dest)
+ && REG_P (new_i2_dest)
&& REGNO (new_i3_dest) == REGNO (new_i2_dest))
REG_N_SETS (REGNO (new_i2_dest))++;
}
are set between I2 and I3. */
if (insn_code_number < 0 && (split = find_split_point (&newpat, i3)) != 0
#ifdef HAVE_cc0
- && GET_CODE (i2dest) == REG
+ && REG_P (i2dest)
#endif
/* We need I2DEST in the proper mode. If it is a hard register
- or the only use of a pseudo, we can change its mode. */
+ or the only use of a pseudo, we can change its mode.
+ Make sure we don't change a hard register to have a mode that
+ isn't valid for it, or change the number of registers. */
&& (GET_MODE (*split) == GET_MODE (i2dest)
|| GET_MODE (*split) == VOIDmode
- || REGNO (i2dest) < FIRST_PSEUDO_REGISTER
- || (REG_N_SETS (REGNO (i2dest)) == 1 && ! added_sets_2
- && ! REG_USERVAR_P (i2dest)))
+ || can_change_dest_mode (i2dest, added_sets_2,
+ GET_MODE (*split)))
&& (next_real_insn (i2) == i3
|| ! use_crosses_set_p (*split, INSN_CUID (i2)))
/* We can't overwrite I2DEST if its value is still used by
#ifdef INSN_SCHEDULING
/* If *SPLIT is a paradoxical SUBREG, when we split it, it should
be written as a ZERO_EXTEND. */
- if (split_code == SUBREG && GET_CODE (SUBREG_REG (*split)) == MEM)
+ if (split_code == SUBREG && MEM_P (SUBREG_REG (*split)))
{
#ifdef LOAD_EXTEND_OP
/* Or as a SIGN_EXTEND if LOAD_EXTEND_OP says that that's
SUBST (*split, newdest);
i2_code_number = recog_for_combine (&newi2pat, i2, &new_i2_notes);
+ /* recog_for_combine might have added CLOBBERs to newi2pat.
+ Make sure NEWPAT does not depend on the clobbered regs. */
+ if (GET_CODE (newi2pat) == PARALLEL)
+ for (i = XVECLEN (newi2pat, 0) - 1; i >= 0; i--)
+ if (GET_CODE (XVECEXP (newi2pat, 0, i)) == CLOBBER)
+ {
+ rtx reg = XEXP (XVECEXP (newi2pat, 0, i), 0);
+ if (reg_overlap_mentioned_p (reg, newpat))
+ {
+ undo_all ();
+ return 0;
+ }
+ }
+
/* If the split point was a MULT and we didn't have one before,
don't use one now. */
if (i2_code_number >= 0 && ! (split_code == MULT && ! have_mult))
&& GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != ZERO_EXTRACT
&& GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != STRICT_LOW_PART
&& ! (temp = SET_DEST (XVECEXP (newpat, 0, 1)),
- (GET_CODE (temp) == REG
+ (REG_P (temp)
&& reg_stat[REGNO (temp)].nonzero_bits != 0
&& GET_MODE_BITSIZE (GET_MODE (temp)) < BITS_PER_WORD
&& GET_MODE_BITSIZE (GET_MODE (temp)) < HOST_BITS_PER_INT
!= GET_MODE_MASK (word_mode))))
&& ! (GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) == SUBREG
&& (temp = SUBREG_REG (SET_DEST (XVECEXP (newpat, 0, 1))),
- (GET_CODE (temp) == REG
+ (REG_P (temp)
&& reg_stat[REGNO (temp)].nonzero_bits != 0
&& GET_MODE_BITSIZE (GET_MODE (temp)) < BITS_PER_WORD
&& GET_MODE_BITSIZE (GET_MODE (temp)) < HOST_BITS_PER_INT
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
if (insn_code_number >= 0)
- {
- rtx insn;
- rtx link;
-
- /* If we will be able to accept this, we have made a change to the
- destination of I3. This requires us to do a few adjustments. */
- PATTERN (i3) = newpat;
- adjust_for_new_dest (i3);
-
- /* I3 now uses what used to be its destination and which is
- now I2's destination. That means we need a LOG_LINK from
- I3 to I2. But we used to have one, so we still will.
-
- However, some later insn might be using I2's dest and have
- a LOG_LINK pointing at I3. We must remove this link.
- The simplest way to remove the link is to point it at I1,
- which we know will be a NOTE. */
-
- for (insn = NEXT_INSN (i3);
- insn && (this_basic_block->next_bb == EXIT_BLOCK_PTR
- || insn != BB_HEAD (this_basic_block->next_bb));
- insn = NEXT_INSN (insn))
- {
- if (INSN_P (insn) && reg_referenced_p (ni2dest, PATTERN (insn)))
- {
- for (link = LOG_LINKS (insn); link;
- link = XEXP (link, 1))
- if (XEXP (link, 0) == i3)
- XEXP (link, 0) = i1;
-
- break;
- }
- }
- }
+ swap_i2i3 = 1;
}
/* Similarly, check for a case where we have a PARALLEL of two independent
if (REG_NOTE_KIND (note) == REG_UNUSED
&& ! reg_set_p (XEXP (note, 0), PATTERN (undobuf.other_insn)))
{
- if (GET_CODE (XEXP (note, 0)) == REG)
+ if (REG_P (XEXP (note, 0)))
REG_N_DEATHS (REGNO (XEXP (note, 0)))--;
remove_note (undobuf.other_insn, note);
}
for (note = new_other_notes; note; note = XEXP (note, 1))
- if (GET_CODE (XEXP (note, 0)) == REG)
+ if (REG_P (XEXP (note, 0)))
REG_N_DEATHS (REGNO (XEXP (note, 0)))++;
distribute_notes (new_other_notes, undobuf.other_insn,
- undobuf.other_insn, NULL_RTX);
+ undobuf.other_insn, NULL_RTX, NULL_RTX, NULL_RTX);
}
#ifdef HAVE_cc0
/* If I2 is the CC0 setter and I3 is the CC0 user then check whether
they are adjacent to each other or not. */
{
rtx p = prev_nonnote_insn (i3);
- if (p && p != i2 && GET_CODE (p) == INSN && newi2pat
+ if (p && p != i2 && NONJUMP_INSN_P (p) && newi2pat
&& sets_cc0_p (newi2pat))
{
undo_all ();
}
#endif
+ /* Only allow this combination if insn_rtx_costs reports that the
+ replacement instructions are cheaper than the originals. */
+ if (!combine_validate_cost (i1, i2, i3, newpat, newi2pat))
+ {
+ undo_all ();
+ return 0;
+ }
+
/* We now know that we can do this combination. Merge the insns and
update the status of registers and LOG_LINKS. */
+ if (swap_i2i3)
+ {
+ rtx insn;
+ rtx link;
+ rtx ni2dest;
+
+ /* I3 now uses what used to be its destination and which is now
+ I2's destination. This requires us to do a few adjustments. */
+ PATTERN (i3) = newpat;
+ adjust_for_new_dest (i3);
+
+ /* We need a LOG_LINK from I3 to I2. But we used to have one,
+ so we still will.
+
+ However, some later insn might be using I2's dest and have
+ a LOG_LINK pointing at I3. We must remove this link.
+ The simplest way to remove the link is to point it at I1,
+ which we know will be a NOTE. */
+
+ /* newi2pat is usually a SET here; however, recog_for_combine might
+ have added some clobbers. */
+ if (GET_CODE (newi2pat) == PARALLEL)
+ ni2dest = SET_DEST (XVECEXP (newi2pat, 0, 0));
+ else
+ ni2dest = SET_DEST (newi2pat);
+
+ for (insn = NEXT_INSN (i3);
+ insn && (this_basic_block->next_bb == EXIT_BLOCK_PTR
+ || insn != BB_HEAD (this_basic_block->next_bb));
+ insn = NEXT_INSN (insn))
+ {
+ if (INSN_P (insn) && reg_referenced_p (ni2dest, PATTERN (insn)))
+ {
+ for (link = LOG_LINKS (insn); link;
+ link = XEXP (link, 1))
+ if (XEXP (link, 0) == i3)
+ XEXP (link, 0) = i1;
+
+ break;
+ }
+ }
+ }
+
{
rtx i3notes, i2notes, i1notes = 0;
rtx i3links, i2links, i1links = 0;
rtx midnotes = 0;
unsigned int regno;
+ /* Compute which registers we expect to eliminate. newi2pat may be setting
+ either i3dest or i2dest, so we must check it. Also, i1dest may be the
+ same as i3dest, in which case newi2pat may be setting i1dest. */
+ rtx elim_i2 = ((newi2pat && reg_set_p (i2dest, newi2pat))
+ || i2dest_in_i2src || i2dest_in_i1src
+ || !i2dest_killed
+ ? 0 : i2dest);
+ rtx elim_i1 = (i1 == 0 || i1dest_in_i1src
+ || (newi2pat && reg_set_p (i1dest, newi2pat))
+ || !i1dest_killed
+ ? 0 : i1dest);
/* Get the old REG_NOTES and LOG_LINKS from all our insns and
clear them. */
INSN_CODE (i3) = insn_code_number;
PATTERN (i3) = newpat;
- if (GET_CODE (i3) == CALL_INSN && CALL_INSN_FUNCTION_USAGE (i3))
+ if (CALL_P (i3) && CALL_INSN_FUNCTION_USAGE (i3))
{
rtx call_usage = CALL_INSN_FUNCTION_USAGE (i3);
{
for (i = 0; i < XVECLEN (PATTERN (i2), 0); i++)
if (GET_CODE (XVECEXP (PATTERN (i2), 0, i)) != USE
- && GET_CODE (SET_DEST (XVECEXP (PATTERN (i2), 0, i))) == REG
+ && REG_P (SET_DEST (XVECEXP (PATTERN (i2), 0, i)))
&& SET_DEST (XVECEXP (PATTERN (i2), 0, i)) != i2dest
&& ! find_reg_note (i2, REG_UNUSED,
SET_DEST (XVECEXP (PATTERN (i2), 0, i))))
PATTERN (i2) = newi2pat;
}
else
- {
- PUT_CODE (i2, NOTE);
- NOTE_LINE_NUMBER (i2) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (i2) = 0;
- }
+ SET_INSN_DELETED (i2);
if (i1)
{
LOG_LINKS (i1) = 0;
REG_NOTES (i1) = 0;
- PUT_CODE (i1, NOTE);
- NOTE_LINE_NUMBER (i1) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (i1) = 0;
+ SET_INSN_DELETED (i1);
}
/* Get death notes for everything that is now used in either I3 or
/* Distribute all the LOG_LINKS and REG_NOTES from I1, I2, and I3. */
if (i3notes)
- distribute_notes (i3notes, i3, i3, newi2pat ? i2 : NULL_RTX);
+ distribute_notes (i3notes, i3, i3, newi2pat ? i2 : NULL_RTX,
+ elim_i2, elim_i1);
if (i2notes)
- distribute_notes (i2notes, i2, i3, newi2pat ? i2 : NULL_RTX);
+ distribute_notes (i2notes, i2, i3, newi2pat ? i2 : NULL_RTX,
+ elim_i2, elim_i1);
if (i1notes)
- distribute_notes (i1notes, i1, i3, newi2pat ? i2 : NULL_RTX);
+ distribute_notes (i1notes, i1, i3, newi2pat ? i2 : NULL_RTX,
+ elim_i2, elim_i1);
if (midnotes)
- distribute_notes (midnotes, NULL_RTX, i3, newi2pat ? i2 : NULL_RTX);
+ distribute_notes (midnotes, NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
+ elim_i2, elim_i1);
/* Distribute any notes added to I2 or I3 by recog_for_combine. We
know these are REG_UNUSED and want them to go to the desired insn,
if (newi2pat && new_i2_notes)
{
for (temp = new_i2_notes; temp; temp = XEXP (temp, 1))
- if (GET_CODE (XEXP (temp, 0)) == REG)
+ if (REG_P (XEXP (temp, 0)))
REG_N_DEATHS (REGNO (XEXP (temp, 0)))++;
- distribute_notes (new_i2_notes, i2, i2, NULL_RTX);
+ distribute_notes (new_i2_notes, i2, i2, NULL_RTX, NULL_RTX, NULL_RTX);
}
if (new_i3_notes)
{
for (temp = new_i3_notes; temp; temp = XEXP (temp, 1))
- if (GET_CODE (XEXP (temp, 0)) == REG)
+ if (REG_P (XEXP (temp, 0)))
REG_N_DEATHS (REGNO (XEXP (temp, 0)))++;
- distribute_notes (new_i3_notes, i3, i3, NULL_RTX);
+ distribute_notes (new_i3_notes, i3, i3, NULL_RTX, NULL_RTX, NULL_RTX);
}
/* If I3DEST was used in I3SRC, it really died in I3. We may need to
if (i3dest_killed)
{
- if (GET_CODE (i3dest_killed) == REG)
+ if (REG_P (i3dest_killed))
REG_N_DEATHS (REGNO (i3dest_killed))++;
if (newi2pat && reg_set_p (i3dest_killed, newi2pat))
distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i3dest_killed,
NULL_RTX),
- NULL_RTX, i2, NULL_RTX);
+ NULL_RTX, i2, NULL_RTX, elim_i2, elim_i1);
else
distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i3dest_killed,
NULL_RTX),
- NULL_RTX, i3, newi2pat ? i2 : NULL_RTX);
+ NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
+ elim_i2, elim_i1);
}
if (i2dest_in_i2src)
{
- if (GET_CODE (i2dest) == REG)
+ if (REG_P (i2dest))
REG_N_DEATHS (REGNO (i2dest))++;
if (newi2pat && reg_set_p (i2dest, newi2pat))
distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i2dest, NULL_RTX),
- NULL_RTX, i2, NULL_RTX);
+ NULL_RTX, i2, NULL_RTX, NULL_RTX, NULL_RTX);
else
distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i2dest, NULL_RTX),
- NULL_RTX, i3, newi2pat ? i2 : NULL_RTX);
+ NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
+ NULL_RTX, NULL_RTX);
}
if (i1dest_in_i1src)
{
- if (GET_CODE (i1dest) == REG)
+ if (REG_P (i1dest))
REG_N_DEATHS (REGNO (i1dest))++;
if (newi2pat && reg_set_p (i1dest, newi2pat))
distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i1dest, NULL_RTX),
- NULL_RTX, i2, NULL_RTX);
+ NULL_RTX, i2, NULL_RTX, NULL_RTX, NULL_RTX);
else
distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i1dest, NULL_RTX),
- NULL_RTX, i3, newi2pat ? i2 : NULL_RTX);
+ NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
+ NULL_RTX, NULL_RTX);
}
distribute_links (i3links);
distribute_links (i2links);
distribute_links (i1links);
- if (GET_CODE (i2dest) == REG)
+ if (REG_P (i2dest))
{
rtx link;
rtx i2_insn = 0, i2_val = 0, set;
}
}
- if (i1 && GET_CODE (i1dest) == REG)
+ if (i1 && REG_P (i1dest))
{
rtx link;
rtx i1_insn = 0, i1_val = 0, set;
mark_jump_label (PATTERN (i3), i3, 0);
if ((temp = next_nonnote_insn (i3)) == NULL_RTX
- || GET_CODE (temp) != BARRIER)
+ || !BARRIER_P (temp))
emit_barrier_after (i3);
}
*new_direct_jump_p = 1;
if ((temp = next_nonnote_insn (undobuf.other_insn)) == NULL_RTX
- || GET_CODE (temp) != BARRIER)
+ || !BARRIER_P (temp))
emit_barrier_after (undobuf.other_insn);
}
#ifdef INSN_SCHEDULING
/* If we are making a paradoxical SUBREG invalid, it becomes a split
point. */
- if (GET_CODE (SUBREG_REG (x)) == MEM)
+ if (MEM_P (SUBREG_REG (x)))
return loc;
#endif
return find_split_point (&SUBREG_REG (x), insn);
if (seq
&& NEXT_INSN (seq) != NULL_RTX
&& NEXT_INSN (NEXT_INSN (seq)) == NULL_RTX
- && GET_CODE (seq) == INSN
+ && NONJUMP_INSN_P (seq)
&& GET_CODE (PATTERN (seq)) == SET
&& SET_DEST (PATTERN (seq)) == reg
&& ! reg_mentioned_p (reg,
SET_SRC (PATTERN (seq)))
- && GET_CODE (NEXT_INSN (seq)) == INSN
+ && NONJUMP_INSN_P (NEXT_INSN (seq))
&& GET_CODE (PATTERN (NEXT_INSN (seq))) == SET
&& SET_DEST (PATTERN (NEXT_INSN (seq))) == reg
&& memory_address_p (GET_MODE (x),
if (src == mask)
SUBST (SET_SRC (x),
- gen_binary (IOR, mode, dest, GEN_INT (src << pos)));
+ simplify_gen_binary (IOR, mode, dest, GEN_INT (src << pos)));
else
- SUBST (SET_SRC (x),
- gen_binary (IOR, mode,
- gen_binary (AND, mode, dest,
- gen_int_mode (~(mask << pos),
- mode)),
- GEN_INT (src << pos)));
+ {
+ rtx negmask = gen_int_mode (~(mask << pos), mode);
+ SUBST (SET_SRC (x),
+ simplify_gen_binary (IOR, mode,
+ simplify_gen_binary (AND, mode,
+ dest, negmask),
+ GEN_INT (src << pos)));
+ }
SUBST (SET_DEST (x), dest);
be better. */
if (GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT
- && GET_CODE (XEXP (SET_SRC (x), 0)) == REG
+ && REG_P (XEXP (SET_SRC (x), 0))
&& (pos = exact_log2 (INTVAL (XEXP (SET_SRC (x), 1)))) >= 7
- && GET_CODE (SET_DEST (x)) == REG
+ && REG_P (SET_DEST (x))
&& (split = find_single_use (SET_DEST (x), insn, (rtx*) 0)) != 0
&& (GET_CODE (*split) == EQ || GET_CODE (*split) == NE)
&& XEXP (*split, 0) == SET_DEST (x)
#define COMBINE_RTX_EQUAL_P(X,Y) \
((X) == (Y) \
- || (GET_CODE (X) == REG && GET_CODE (Y) == REG \
+ || (REG_P (X) && REG_P (Y) \
&& REGNO (X) == REGNO (Y) && GET_MODE (X) == GET_MODE (Y)))
if (! in_dest && COMBINE_RTX_EQUAL_P (x, from))
delete the feeding insn, which is incorrect.
So force this insn not to match in this (rare) case. */
- if (! in_dest && code == REG && GET_CODE (from) == REG
+ if (! in_dest && code == REG && REG_P (from)
&& REGNO (x) == REGNO (from))
return gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
{
rtx dest = SET_DEST (XVECEXP (x, 0, i));
- if (GET_CODE (dest) != REG
+ if (!REG_P (dest)
&& GET_CODE (dest) != CC0
&& GET_CODE (dest) != PC)
{
where we want to suppress replacing something inside a
SET_SRC are handled via the IN_DEST operand. */
if (code == SET
- && (GET_CODE (SET_DEST (x)) == REG
+ && (REG_P (SET_DEST (x))
|| GET_CODE (SET_DEST (x)) == CC0
|| GET_CODE (SET_DEST (x)) == PC))
fmt = "ie";
/* If this is a register being set, ignore it. */
new = XEXP (x, i);
if (in_dest
- && (code == SUBREG || code == STRICT_LOW_PART
- || code == ZERO_EXTRACT)
&& i == 0
- && GET_CODE (new) == REG)
+ && (((code == SUBREG || code == ZERO_EXTRACT)
+ && REG_P (new))
+ || code == STRICT_LOW_PART))
;
else if (COMBINE_RTX_EQUAL_P (XEXP (x, i), from))
#ifdef CANNOT_CHANGE_MODE_CLASS
if (code == SUBREG
- && GET_CODE (to) == REG
+ && REG_P (to)
&& REGNO (to) < FIRST_PSEUDO_REGISTER
&& REG_CANNOT_CHANGE_MODE_P (REGNO (to),
GET_MODE (to),
{
x = simplify_unary_operation (ZERO_EXTEND, GET_MODE (x),
new, GET_MODE (XEXP (x, 0)));
- if (! x)
- abort ();
+ gcc_assert (x);
}
else
SUBST (XEXP (x, i), new);
SUBST (XEXP (x, 1), temp);
}
- /* If this is a PLUS, MINUS, or MULT, and the first operand is the
- sign extension of a PLUS with a constant, reverse the order of the sign
- extension and the addition. Note that this not the same as the original
- code, but overflow is undefined for signed values. Also note that the
- PLUS will have been partially moved "inside" the sign-extension, so that
- the first operand of X will really look like:
- (ashiftrt (plus (ashift A C4) C5) C4).
- We convert this to
- (plus (ashiftrt (ashift A C4) C2) C4)
- and replace the first operand of X with that expression. Later parts
- of this function may simplify the expression further.
-
- For example, if we start with (mult (sign_extend (plus A C1)) C2),
- we swap the SIGN_EXTEND and PLUS. Later code will apply the
- distributive law to produce (plus (mult (sign_extend X) C1) C3).
-
- We do this to simplify address expressions. */
-
- if ((code == PLUS || code == MINUS || code == MULT)
- && GET_CODE (XEXP (x, 0)) == ASHIFTRT
- && GET_CODE (XEXP (XEXP (x, 0), 0)) == PLUS
- && GET_CODE (XEXP (XEXP (XEXP (x, 0), 0), 0)) == ASHIFT
- && GET_CODE (XEXP (XEXP (XEXP (XEXP (x, 0), 0), 0), 1)) == CONST_INT
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
- && XEXP (XEXP (XEXP (XEXP (x, 0), 0), 0), 1) == XEXP (XEXP (x, 0), 1)
- && GET_CODE (XEXP (XEXP (XEXP (x, 0), 0), 1)) == CONST_INT
- && (temp = simplify_binary_operation (ASHIFTRT, mode,
- XEXP (XEXP (XEXP (x, 0), 0), 1),
- XEXP (XEXP (x, 0), 1))) != 0)
- {
- rtx new
- = simplify_shift_const (NULL_RTX, ASHIFT, mode,
- XEXP (XEXP (XEXP (XEXP (x, 0), 0), 0), 0),
- INTVAL (XEXP (XEXP (x, 0), 1)));
-
- new = simplify_shift_const (NULL_RTX, ASHIFTRT, mode, new,
- INTVAL (XEXP (XEXP (x, 0), 1)));
-
- SUBST (XEXP (x, 0), gen_binary (PLUS, mode, new, temp));
- }
-
/* If this is a simple operation applied to an IF_THEN_ELSE, try
applying it to the arms of the IF_THEN_ELSE. This often simplifies
things. Check for cases where both arms are testing the same
/* If the result values are STORE_FLAG_VALUE and zero, we can
just make the comparison operation. */
if (true_rtx == const_true_rtx && false_rtx == const0_rtx)
- x = gen_binary (cond_code, mode, cond, cop1);
+ x = simplify_gen_relational (cond_code, mode, VOIDmode,
+ cond, cop1);
else if (true_rtx == const0_rtx && false_rtx == const_true_rtx
&& ((reversed = reversed_comparison_code_parts
(cond_code, cond, cop1, NULL))
!= UNKNOWN))
- x = gen_binary (reversed, mode, cond, cop1);
+ x = simplify_gen_relational (reversed, mode, VOIDmode,
+ cond, cop1);
/* Likewise, we can make the negate of a comparison operation
if the result values are - STORE_FLAG_VALUE and zero. */
&& INTVAL (true_rtx) == - STORE_FLAG_VALUE
&& false_rtx == const0_rtx)
x = simplify_gen_unary (NEG, mode,
- gen_binary (cond_code, mode, cond,
- cop1),
+ simplify_gen_relational (cond_code,
+ mode, VOIDmode,
+ cond, cop1),
mode);
else if (GET_CODE (false_rtx) == CONST_INT
&& INTVAL (false_rtx) == - STORE_FLAG_VALUE
(cond_code, cond, cop1, NULL))
!= UNKNOWN))
x = simplify_gen_unary (NEG, mode,
- gen_binary (reversed, mode,
- cond, cop1),
+ simplify_gen_relational (reversed,
+ mode, VOIDmode,
+ cond, cop1),
mode);
else
return gen_rtx_IF_THEN_ELSE (mode,
- gen_binary (cond_code, VOIDmode,
- cond, cop1),
+ simplify_gen_relational (cond_code,
+ mode,
+ VOIDmode,
+ cond,
+ cop1),
true_rtx, false_rtx);
code = GET_CODE (x);
}
if (inner)
- return gen_binary (code, mode, other, inner);
+ return simplify_gen_binary (code, mode, other, inner);
}
}
/* Don't change the mode of the MEM if that would change the meaning
of the address. */
- if (GET_CODE (SUBREG_REG (x)) == MEM
+ if (MEM_P (SUBREG_REG (x))
&& (MEM_VOLATILE_P (SUBREG_REG (x))
|| mode_dependent_address_p (XEXP (SUBREG_REG (x), 0))))
return gen_rtx_CLOBBER (mode, const0_rtx);
if (GET_CODE (XEXP (x, 0)) == XOR
&& XEXP (XEXP (x, 0), 1) == const1_rtx
&& nonzero_bits (XEXP (XEXP (x, 0), 0), mode) == 1)
- return gen_binary (PLUS, mode, XEXP (XEXP (x, 0), 0), constm1_rtx);
+ return simplify_gen_binary (PLUS, mode, XEXP (XEXP (x, 0), 0),
+ constm1_rtx);
temp = expand_compound_operation (XEXP (x, 0));
or a SUBREG of one since we'd be making the expression more
complex if it was just a register. */
- if (GET_CODE (temp) != REG
+ if (!REG_P (temp)
&& ! (GET_CODE (temp) == SUBREG
- && GET_CODE (SUBREG_REG (temp)) == REG)
+ && REG_P (SUBREG_REG (temp)))
&& (i = exact_log2 (nonzero_bits (temp, mode))) >= 0)
{
rtx temp1 = simplify_shift_const
in1 = XEXP (XEXP (XEXP (x, 0), 0), 0);
in2 = XEXP (XEXP (x, 0), 1);
- return gen_binary (MINUS, mode, XEXP (x, 1),
- gen_binary (MULT, mode, in1, in2));
+ return simplify_gen_binary (MINUS, mode, XEXP (x, 1),
+ simplify_gen_binary (MULT, mode,
+ in1, in2));
}
/* If we have (plus (plus (A const) B)), associate it so that CONST is
they are now checked elsewhere. */
if (GET_CODE (XEXP (x, 0)) == PLUS
&& CONSTANT_ADDRESS_P (XEXP (XEXP (x, 0), 1)))
- return gen_binary (PLUS, mode,
- gen_binary (PLUS, mode, XEXP (XEXP (x, 0), 0),
- XEXP (x, 1)),
- XEXP (XEXP (x, 0), 1));
+ return simplify_gen_binary (PLUS, mode,
+ simplify_gen_binary (PLUS, mode,
+ XEXP (XEXP (x, 0), 0),
+ XEXP (x, 1)),
+ XEXP (XEXP (x, 0), 1));
/* (plus (xor (and <foo> (const_int pow2 - 1)) <c>) <-c>)
when c is (const_int (pow2 + 1) / 2) is a sign extension of a
if (COMPARISON_P (XEXP (x, 0))
&& ((STORE_FLAG_VALUE == -1 && XEXP (x, 1) == const1_rtx)
|| (STORE_FLAG_VALUE == 1 && XEXP (x, 1) == constm1_rtx))
- && (reversed = reversed_comparison (XEXP (x, 0), mode,
- XEXP (XEXP (x, 0), 0),
- XEXP (XEXP (x, 0), 1))))
+ && (reversed = reversed_comparison (XEXP (x, 0), mode)))
return
simplify_gen_unary (NEG, mode, reversed, mode);
the bitsize of the mode - 1. This allows simplification of
"a = (b & 8) == 0;" */
if (XEXP (x, 1) == constm1_rtx
- && GET_CODE (XEXP (x, 0)) != REG
+ && !REG_P (XEXP (x, 0))
&& ! (GET_CODE (XEXP (x, 0)) == SUBREG
- && GET_CODE (SUBREG_REG (XEXP (x, 0))) == REG)
+ && REG_P (SUBREG_REG (XEXP (x, 0))))
&& nonzero_bits (XEXP (x, 0), mode) == 1)
return simplify_shift_const (NULL_RTX, ASHIFTRT, mode,
simplify_shift_const (NULL_RTX, ASHIFT, mode,
& nonzero_bits (XEXP (x, 1), mode)) == 0)
{
/* Try to simplify the expression further. */
- rtx tor = gen_binary (IOR, mode, XEXP (x, 0), XEXP (x, 1));
+ rtx tor = simplify_gen_binary (IOR, mode, XEXP (x, 0), XEXP (x, 1));
temp = combine_simplify_rtx (tor, mode, in_dest);
/* If we could, great. If not, do not go ahead with the IOR
if (STORE_FLAG_VALUE == 1
&& XEXP (x, 0) == const1_rtx
&& COMPARISON_P (XEXP (x, 1))
- && (reversed = reversed_comparison (XEXP (x, 1), mode,
- XEXP (XEXP (x, 1), 0),
- XEXP (XEXP (x, 1), 1))))
+ && (reversed = reversed_comparison (XEXP (x, 1), mode)))
return reversed;
/* (minus <foo> (and <foo> (const_int -pow2))) becomes
in1 = XEXP (XEXP (XEXP (x, 1), 0), 0);
in2 = XEXP (XEXP (x, 1), 1);
- return gen_binary (PLUS, mode, gen_binary (MULT, mode, in1, in2),
- XEXP (x, 0));
+ return simplify_gen_binary (PLUS, mode,
+ simplify_gen_binary (MULT, mode,
+ in1, in2),
+ XEXP (x, 0));
}
/* Canonicalize (minus (neg A) (mult B C)) to
in1 = simplify_gen_unary (NEG, mode, XEXP (XEXP (x, 1), 0), mode);
in2 = XEXP (XEXP (x, 1), 1);
- return gen_binary (MINUS, mode, gen_binary (MULT, mode, in1, in2),
- XEXP (XEXP (x, 0), 0));
+ return simplify_gen_binary (MINUS, mode,
+ simplify_gen_binary (MULT, mode,
+ in1, in2),
+ XEXP (XEXP (x, 0), 0));
}
/* Canonicalize (minus A (plus B C)) to (minus (minus A B) C) for
integers. */
if (GET_CODE (XEXP (x, 1)) == PLUS && INTEGRAL_MODE_P (mode))
- return gen_binary (MINUS, mode,
- gen_binary (MINUS, mode, XEXP (x, 0),
- XEXP (XEXP (x, 1), 0)),
- XEXP (XEXP (x, 1), 1));
+ return simplify_gen_binary (MINUS, mode,
+ simplify_gen_binary (MINUS, mode,
+ XEXP (x, 0),
+ XEXP (XEXP (x, 1), 0)),
+ XEXP (XEXP (x, 1), 1));
break;
case MULT:
if (GET_CODE (XEXP (x, 0)) == PLUS)
{
- x = apply_distributive_law
- (gen_binary (PLUS, mode,
- gen_binary (MULT, mode,
- XEXP (XEXP (x, 0), 0), XEXP (x, 1)),
- gen_binary (MULT, mode,
- XEXP (XEXP (x, 0), 1),
- copy_rtx (XEXP (x, 1)))));
-
- if (GET_CODE (x) != MULT)
- return x;
+ rtx result = distribute_and_simplify_rtx (x, 0);
+ if (result)
+ return result;
}
+
/* Try simplify a*(b/c) as (a*b)/c. */
if (FLOAT_MODE_P (mode) && flag_unsafe_math_optimizations
&& GET_CODE (XEXP (x, 0)) == DIV)
XEXP (XEXP (x, 0), 0),
XEXP (x, 1));
if (tem)
- return gen_binary (DIV, mode, tem, XEXP (XEXP (x, 0), 1));
+ return simplify_gen_binary (DIV, mode, tem, XEXP (XEXP (x, 0), 1));
}
break;
&& nonzero_bits (op0, mode) == 1)
{
op0 = expand_compound_operation (op0);
- return gen_binary (XOR, mode,
- gen_lowpart (mode, op0),
- const1_rtx);
+ return simplify_gen_binary (XOR, mode,
+ gen_lowpart (mode, op0),
+ const1_rtx);
}
else if (STORE_FLAG_VALUE == 1
return simplify_shift_const (x, code, mode, XEXP (x, 0),
INTVAL (XEXP (x, 1)));
- else if (SHIFT_COUNT_TRUNCATED && GET_CODE (XEXP (x, 1)) != REG)
+ else if (SHIFT_COUNT_TRUNCATED && !REG_P (XEXP (x, 1)))
SUBST (XEXP (x, 1),
force_to_mode (XEXP (x, 1), GET_MODE (XEXP (x, 1)),
((HOST_WIDE_INT) 1
rtx op1 = XEXP (x, 1);
int len;
- if (GET_CODE (op1) != PARALLEL)
- abort ();
+ gcc_assert (GET_CODE (op1) == PARALLEL);
len = XVECLEN (op1, 0);
if (len == 1
&& GET_CODE (XVECEXP (op1, 0, 0)) == CONST_INT
if (GET_CODE (op0) == VEC_CONCAT)
{
HOST_WIDE_INT op0_size = GET_MODE_SIZE (GET_MODE (XEXP (op0, 0)));
- if (op0_size < offset)
+ if (offset < op0_size)
op0 = XEXP (op0, 0);
else
{
/* Simplify storing of the truth value. */
if (comparison_p && true_rtx == const_true_rtx && false_rtx == const0_rtx)
- return gen_binary (true_code, mode, XEXP (cond, 0), XEXP (cond, 1));
+ return simplify_gen_relational (true_code, mode, VOIDmode,
+ XEXP (cond, 0), XEXP (cond, 1));
/* Also when the truth value has to be reversed. */
if (comparison_p
&& true_rtx == const0_rtx && false_rtx == const_true_rtx
- && (reversed = reversed_comparison (cond, mode, XEXP (cond, 0),
- XEXP (cond, 1))))
+ && (reversed = reversed_comparison (cond, mode)))
return reversed;
/* Sometimes we can simplify the arm of an IF_THEN_ELSE if a register used
comparisons and see if that says anything about the value of each arm. */
if (comparison_p
- && ((false_code = combine_reversed_comparison_code (cond))
+ && ((false_code = reversed_comparison_code (cond, NULL))
!= UNKNOWN)
- && GET_CODE (XEXP (cond, 0)) == REG)
+ && REG_P (XEXP (cond, 0)))
{
HOST_WIDE_INT nzb;
rtx from = XEXP (cond, 0);
the false arm is more complicated than the true arm. */
if (comparison_p
- && combine_reversed_comparison_code (cond) != UNKNOWN
+ && reversed_comparison_code (cond, NULL) != UNKNOWN
&& (true_rtx == pc_rtx
|| (CONSTANT_P (true_rtx)
&& GET_CODE (false_rtx) != CONST_INT && false_rtx != pc_rtx)
|| rtx_equal_p (false_rtx, XEXP (cond, 0))))
{
true_code = reversed_comparison_code (cond, NULL);
- SUBST (XEXP (x, 0),
- reversed_comparison (cond, GET_MODE (cond), XEXP (cond, 0),
- XEXP (cond, 1)));
-
+ SUBST (XEXP (x, 0), reversed_comparison (cond, GET_MODE (cond)));
SUBST (XEXP (x, 1), false_rtx);
SUBST (XEXP (x, 2), true_rtx);
{
case GE:
case GT:
- return gen_binary (SMAX, mode, true_rtx, false_rtx);
+ return simplify_gen_binary (SMAX, mode, true_rtx, false_rtx);
case LE:
case LT:
- return gen_binary (SMIN, mode, true_rtx, false_rtx);
+ return simplify_gen_binary (SMIN, mode, true_rtx, false_rtx);
case GEU:
case GTU:
- return gen_binary (UMAX, mode, true_rtx, false_rtx);
+ return simplify_gen_binary (UMAX, mode, true_rtx, false_rtx);
case LEU:
case LTU:
- return gen_binary (UMIN, mode, true_rtx, false_rtx);
+ return simplify_gen_binary (UMIN, mode, true_rtx, false_rtx);
default:
break;
}
rtx f = make_compound_operation (false_rtx, SET);
rtx cond_op0 = XEXP (cond, 0);
rtx cond_op1 = XEXP (cond, 1);
- enum rtx_code op = NIL, extend_op = NIL;
+ enum rtx_code op = UNKNOWN, extend_op = UNKNOWN;
enum machine_mode m = mode;
rtx z = 0, c1 = NULL_RTX;
if (z)
{
- temp = subst (gen_binary (true_code, m, cond_op0, cond_op1),
+ temp = subst (simplify_gen_relational (true_code, m, VOIDmode,
+ cond_op0, cond_op1),
pc_rtx, pc_rtx, 0, 0);
- temp = gen_binary (MULT, m, temp,
- gen_binary (MULT, m, c1, const_true_rtx));
+ temp = simplify_gen_binary (MULT, m, temp,
+ simplify_gen_binary (MULT, m, c1,
+ const_true_rtx));
temp = subst (temp, pc_rtx, pc_rtx, 0, 0);
- temp = gen_binary (op, m, gen_lowpart (m, z), temp);
+ temp = simplify_gen_binary (op, m, gen_lowpart (m, z), temp);
- if (extend_op != NIL)
+ if (extend_op != UNKNOWN)
temp = simplify_gen_unary (extend_op, mode, temp, m);
return temp;
if (GET_CODE (src) == COMPARE)
op0 = XEXP (src, 0), op1 = XEXP (src, 1);
else
- op0 = src, op1 = const0_rtx;
+ op0 = src, op1 = CONST0_RTX (GET_MODE (src));
tmp = simplify_relational_operation (old_code, compare_mode, VOIDmode,
op0, op1);
which case we can safely change its mode. */
if (compare_mode != GET_MODE (dest))
{
- unsigned int regno = REGNO (dest);
- rtx new_dest = gen_rtx_REG (compare_mode, regno);
-
- if (regno < FIRST_PSEUDO_REGISTER
- || (REG_N_SETS (regno) == 1 && ! REG_USERVAR_P (dest)))
+ if (can_change_dest_mode (dest, 0, compare_mode))
{
+ unsigned int regno = REGNO (dest);
+ rtx new_dest = gen_rtx_REG (compare_mode, regno);
+
if (regno >= FIRST_PSEUDO_REGISTER)
SUBST (regno_reg_rtx[regno], new_dest);
PUT_CODE (*cc_use, old_code);
other_changed = 0;
- op0 = gen_binary (XOR, GET_MODE (op0), op0, GEN_INT (mask));
+ op0 = simplify_gen_binary (XOR, GET_MODE (op0),
+ op0, GEN_INT (mask));
}
}
}
SUBST (SET_SRC (x), gen_rtx_COMPARE (compare_mode, op0, op1));
src = SET_SRC (x);
}
+ else if (GET_MODE (op0) == compare_mode && op1 == const0_rtx)
+ {
+ SUBST(SET_SRC (x), op0);
+ src = SET_SRC (x);
+ }
else
{
/* Otherwise, update the COMPARE if needed. */
< GET_MODE_SIZE (GET_MODE (SUBREG_REG (src))))
#endif
#ifdef CANNOT_CHANGE_MODE_CLASS
- && ! (GET_CODE (dest) == REG && REGNO (dest) < FIRST_PSEUDO_REGISTER
+ && ! (REG_P (dest) && REGNO (dest) < FIRST_PSEUDO_REGISTER
&& REG_CANNOT_CHANGE_MODE_P (REGNO (dest),
GET_MODE (SUBREG_REG (src)),
GET_MODE (src)))
#endif
- && (GET_CODE (dest) == REG
+ && (REG_P (dest)
|| (GET_CODE (dest) == SUBREG
- && GET_CODE (SUBREG_REG (dest)) == REG)))
+ && REG_P (SUBREG_REG (dest)))))
{
SUBST (SET_DEST (x),
gen_lowpart (GET_MODE (SUBREG_REG (src)),
zero_extend to avoid the reload that would otherwise be required. */
if (GET_CODE (src) == SUBREG && subreg_lowpart_p (src)
- && LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))) != NIL
+ && LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))) != UNKNOWN
&& SUBREG_BYTE (src) == 0
&& (GET_MODE_SIZE (GET_MODE (src))
> GET_MODE_SIZE (GET_MODE (SUBREG_REG (src))))
- && GET_CODE (SUBREG_REG (src)) == MEM)
+ && MEM_P (SUBREG_REG (src)))
{
SUBST (SET_SRC (x),
gen_rtx_fmt_e (LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))),
&& rtx_equal_p (XEXP (false_rtx, 1), true_rtx))
term1 = true_rtx, false_rtx = XEXP (false_rtx, 0), true_rtx = const0_rtx;
- term2 = gen_binary (AND, GET_MODE (src),
- XEXP (XEXP (src, 0), 0), true_rtx);
- term3 = gen_binary (AND, GET_MODE (src),
- simplify_gen_unary (NOT, GET_MODE (src),
- XEXP (XEXP (src, 0), 0),
- GET_MODE (src)),
- false_rtx);
+ term2 = simplify_gen_binary (AND, GET_MODE (src),
+ XEXP (XEXP (src, 0), 0), true_rtx);
+ term3 = simplify_gen_binary (AND, GET_MODE (src),
+ simplify_gen_unary (NOT, GET_MODE (src),
+ XEXP (XEXP (src, 0), 0),
+ GET_MODE (src)),
+ false_rtx);
SUBST (SET_SRC (x),
- gen_binary (IOR, GET_MODE (src),
- gen_binary (IOR, GET_MODE (src), term1, term2),
- term3));
+ simplify_gen_binary (IOR, GET_MODE (src),
+ simplify_gen_binary (IOR, GET_MODE (src),
+ term1, term2),
+ term3));
src = SET_SRC (x);
}
if (GET_CODE (op0) == XOR
&& rtx_equal_p (XEXP (op0, 0), op1)
&& ! side_effects_p (op1))
- x = gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode, XEXP (op0, 1), mode),
- op1);
+ x = simplify_gen_binary (AND, mode,
+ simplify_gen_unary (NOT, mode,
+ XEXP (op0, 1), mode),
+ op1);
if (GET_CODE (op0) == XOR
&& rtx_equal_p (XEXP (op0, 1), op1)
&& ! side_effects_p (op1))
- x = gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode, XEXP (op0, 0), mode),
- op1);
+ x = simplify_gen_binary (AND, mode,
+ simplify_gen_unary (NOT, mode,
+ XEXP (op0, 0), mode),
+ op1);
/* Similarly for (~(A ^ B)) & A. */
if (GET_CODE (op0) == NOT
&& GET_CODE (XEXP (op0, 0)) == XOR
&& rtx_equal_p (XEXP (XEXP (op0, 0), 0), op1)
&& ! side_effects_p (op1))
- x = gen_binary (AND, mode, XEXP (XEXP (op0, 0), 1), op1);
+ x = simplify_gen_binary (AND, mode, XEXP (XEXP (op0, 0), 1), op1);
if (GET_CODE (op0) == NOT
&& GET_CODE (XEXP (op0, 0)) == XOR
&& rtx_equal_p (XEXP (XEXP (op0, 0), 1), op1)
&& ! side_effects_p (op1))
- x = gen_binary (AND, mode, XEXP (XEXP (op0, 0), 0), op1);
+ x = simplify_gen_binary (AND, mode, XEXP (XEXP (op0, 0), 0), op1);
/* We can call simplify_and_const_int only if we don't lose
any (sign) bits when converting INTVAL (op1) to
&& GET_CODE (XEXP (op0, 1)) == CONST_INT
&& GET_CODE (op1) == CONST_INT
&& (INTVAL (XEXP (op0, 1)) & INTVAL (op1)) != 0)
- return gen_binary (IOR, mode,
- gen_binary (AND, mode, XEXP (op0, 0),
+ return simplify_gen_binary (IOR, mode,
+ simplify_gen_binary
+ (AND, mode, XEXP (op0, 0),
GEN_INT (INTVAL (XEXP (op0, 1))
& ~INTVAL (op1))), op1);
&& ! side_effects_p (XEXP (op0, 1)))
return op1;
- /* In the following group of tests (and those in case IOR below),
- we start with some combination of logical operations and apply
- the distributive law followed by the inverse distributive law.
- Most of the time, this results in no change. However, if some of
- the operands are the same or inverses of each other, simplifications
- will result.
-
- For example, (and (ior A B) (not B)) can occur as the result of
- expanding a bit field assignment. When we apply the distributive
- law to this, we get (ior (and (A (not B))) (and (B (not B)))),
- which then simplifies to (and (A (not B))).
-
- If we have (and (ior A B) C), apply the distributive law and then
- the inverse distributive law to see if things simplify. */
-
+ /* If we have any of (and (ior A B) C) or (and (xor A B) C),
+ apply the distributive law and then the inverse distributive
+ law to see if things simplify. */
if (GET_CODE (op0) == IOR || GET_CODE (op0) == XOR)
{
- x = apply_distributive_law
- (gen_binary (GET_CODE (op0), mode,
- gen_binary (AND, mode, XEXP (op0, 0), op1),
- gen_binary (AND, mode, XEXP (op0, 1),
- copy_rtx (op1))));
- if (GET_CODE (x) != AND)
- return x;
+ rtx result = distribute_and_simplify_rtx (x, 0);
+ if (result)
+ return result;
}
-
if (GET_CODE (op1) == IOR || GET_CODE (op1) == XOR)
- return apply_distributive_law
- (gen_binary (GET_CODE (op1), mode,
- gen_binary (AND, mode, XEXP (op1, 0), op0),
- gen_binary (AND, mode, XEXP (op1, 1),
- copy_rtx (op0))));
-
- /* Similarly, taking advantage of the fact that
- (and (not A) (xor B C)) == (xor (ior A B) (ior A C)) */
-
- if (GET_CODE (op0) == NOT && GET_CODE (op1) == XOR)
- return apply_distributive_law
- (gen_binary (XOR, mode,
- gen_binary (IOR, mode, XEXP (op0, 0), XEXP (op1, 0)),
- gen_binary (IOR, mode, copy_rtx (XEXP (op0, 0)),
- XEXP (op1, 1))));
-
- else if (GET_CODE (op1) == NOT && GET_CODE (op0) == XOR)
- return apply_distributive_law
- (gen_binary (XOR, mode,
- gen_binary (IOR, mode, XEXP (op1, 0), XEXP (op0, 0)),
- gen_binary (IOR, mode, copy_rtx (XEXP (op1, 0)), XEXP (op0, 1))));
+ {
+ rtx result = distribute_and_simplify_rtx (x, 1);
+ if (result)
+ return result;
+ }
break;
case IOR:
if (GET_CODE (op0) == AND)
{
- x = apply_distributive_law
- (gen_binary (AND, mode,
- gen_binary (IOR, mode, XEXP (op0, 0), op1),
- gen_binary (IOR, mode, XEXP (op0, 1),
- copy_rtx (op1))));
-
- if (GET_CODE (x) != IOR)
- return x;
+ rtx result = distribute_and_simplify_rtx (x, 0);
+ if (result)
+ return result;
}
if (GET_CODE (op1) == AND)
{
- x = apply_distributive_law
- (gen_binary (AND, mode,
- gen_binary (IOR, mode, XEXP (op1, 0), op0),
- gen_binary (IOR, mode, XEXP (op1, 1),
- copy_rtx (op0))));
-
- if (GET_CODE (x) != IOR)
- return x;
+ rtx result = distribute_and_simplify_rtx (x, 1);
+ if (result)
+ return result;
}
/* Convert (ior (ashift A CX) (lshiftrt A CY)) where CX+CY equals the
if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
&& (nonzero_bits (op0, mode)
& nonzero_bits (op1, mode)) == 0)
- return (gen_binary (IOR, mode, op0, op1));
+ return (simplify_gen_binary (IOR, mode, op0, op1));
/* Convert (XOR (NOT x) (NOT y)) to (XOR x y).
Also convert (XOR (NOT x) y) to (NOT (XOR x y)), similarly for
}
else if (num_negated == 1)
return
- simplify_gen_unary (NOT, mode, gen_binary (XOR, mode, op0, op1),
+ simplify_gen_unary (NOT, mode,
+ simplify_gen_binary (XOR, mode, op0, op1),
mode);
}
if (GET_CODE (op0) == AND
&& rtx_equal_p (XEXP (op0, 1), op1)
&& ! side_effects_p (op1))
- return gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode, XEXP (op0, 0), mode),
- op1);
+ return simplify_gen_binary (AND, mode,
+ simplify_gen_unary (NOT, mode,
+ XEXP (op0, 0), mode),
+ op1);
else if (GET_CODE (op0) == AND
&& rtx_equal_p (XEXP (op0, 0), op1)
&& ! side_effects_p (op1))
- return gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode, XEXP (op0, 1), mode),
- op1);
+ return simplify_gen_binary (AND, mode,
+ simplify_gen_unary (NOT, mode,
+ XEXP (op0, 1), mode),
+ op1);
/* (xor (comparison foo bar) (const_int 1)) can become the reversed
comparison if STORE_FLAG_VALUE is 1. */
if (STORE_FLAG_VALUE == 1
&& op1 == const1_rtx
&& COMPARISON_P (op0)
- && (reversed = reversed_comparison (op0, mode, XEXP (op0, 0),
- XEXP (op0, 1))))
+ && (reversed = reversed_comparison (op0, mode)))
return reversed;
/* (lshiftrt foo C) where C is the number of bits in FOO minus 1
== (unsigned HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (mode) - 1))
&& op1 == const_true_rtx
&& COMPARISON_P (op0)
- && (reversed = reversed_comparison (op0, mode, XEXP (op0, 0),
- XEXP (op0, 1))))
+ && (reversed = reversed_comparison (op0, mode)))
return reversed;
break;
default:
- abort ();
+ gcc_unreachable ();
}
return x;
case ZERO_EXTRACT:
unsignedp = 1;
+
+ /* ... fall through ... */
+
case SIGN_EXTRACT:
/* If the operand is a CLOBBER, just return it. */
if (GET_CODE (XEXP (x, 0)) == CLOBBER)
rtx inner;
rtx pos; /* Always counts from low bit. */
int len;
- rtx mask;
+ rtx mask, cleared, masked;
enum machine_mode compute_mode;
/* Loop until we find something we can't simplify. */
/* If position is ADJUST - X, new position is X. */
pos = XEXP (pos, 0);
else
- pos = gen_binary (MINUS, GET_MODE (pos),
- GEN_INT (GET_MODE_BITSIZE (GET_MODE (inner))
- - len),
- pos);
+ pos = simplify_gen_binary (MINUS, GET_MODE (pos),
+ GEN_INT (GET_MODE_BITSIZE (
+ GET_MODE (inner))
+ - len),
+ pos);
}
}
}
/* Compute a mask of LEN bits, if we can do this on the host machine. */
- if (len < HOST_BITS_PER_WIDE_INT)
- mask = GEN_INT (((HOST_WIDE_INT) 1 << len) - 1);
- else
+ if (len >= HOST_BITS_PER_WIDE_INT)
break;
/* Now compute the equivalent expression. Make a copy of INNER
for the SET_DEST in case it is a MEM into which we will substitute;
we don't want shared RTL in that case. */
- x = gen_rtx_SET
- (VOIDmode, copy_rtx (inner),
- gen_binary (IOR, compute_mode,
- gen_binary (AND, compute_mode,
- simplify_gen_unary (NOT, compute_mode,
- gen_binary (ASHIFT,
- compute_mode,
- mask, pos),
- compute_mode),
- inner),
- gen_binary (ASHIFT, compute_mode,
- gen_binary (AND, compute_mode,
- gen_lowpart
- (compute_mode, SET_SRC (x)),
- mask),
- pos)));
+ mask = GEN_INT (((HOST_WIDE_INT) 1 << len) - 1);
+ cleared = simplify_gen_binary (AND, compute_mode,
+ simplify_gen_unary (NOT, compute_mode,
+ simplify_gen_binary (ASHIFT,
+ compute_mode,
+ mask, pos),
+ compute_mode),
+ inner);
+ masked = simplify_gen_binary (ASHIFT, compute_mode,
+ simplify_gen_binary (
+ AND, compute_mode,
+ gen_lowpart (compute_mode, SET_SRC (x)),
+ mask),
+ pos);
+
+ x = gen_rtx_SET (VOIDmode, copy_rtx (inner),
+ simplify_gen_binary (IOR, compute_mode,
+ cleared, masked));
}
return x;
The subreg adds or removes high bits; its mode is
irrelevant to the meaning of this extraction,
since POS and LEN count from the lsb. */
- if (GET_CODE (SUBREG_REG (inner)) == MEM)
+ if (MEM_P (SUBREG_REG (inner)))
is_mode = GET_MODE (SUBREG_REG (inner));
inner = SUBREG_REG (inner);
}
if (tmode != BLKmode
&& ! (spans_byte && inner_mode != tmode)
&& ((pos_rtx == 0 && (pos % BITS_PER_WORD) == 0
- && GET_CODE (inner) != MEM
+ && !MEM_P (inner)
&& (! in_dest
- || (GET_CODE (inner) == REG
+ || (REG_P (inner)
&& have_insn_for (STRICT_LOW_PART, tmode))))
- || (GET_CODE (inner) == MEM && pos_rtx == 0
+ || (MEM_P (inner) && pos_rtx == 0
&& (pos
% (STRICT_ALIGNMENT ? GET_MODE_ALIGNMENT (tmode)
: BITS_PER_UNIT)) == 0
If INNER is not a MEM, get a piece consisting of just the field
of interest (in this case POS % BITS_PER_WORD must be 0). */
- if (GET_CODE (inner) == MEM)
+ if (MEM_P (inner))
{
HOST_WIDE_INT offset;
new = adjust_address_nv (inner, tmode, offset);
}
- else if (GET_CODE (inner) == REG)
+ else if (REG_P (inner))
{
if (tmode != inner_mode)
{
/* Avoid creating invalid subregs, for example when
simplifying (x>>32)&255. */
- if (final_word >= GET_MODE_SIZE (inner_mode))
+ if (!validate_subreg (tmode, inner_mode, inner, final_word))
return NULL_RTX;
new = gen_rtx_SUBREG (tmode, inner, final_word);
make a STRICT_LOW_PART unless we made a MEM. */
if (in_dest)
- return (GET_CODE (new) == MEM ? new
+ return (MEM_P (new) ? new
: (GET_CODE (new) != SUBREG
? gen_rtx_CLOBBER (tmode, const0_rtx)
: gen_rtx_STRICT_LOW_PART (VOIDmode, new)));
length is not 1. In all other cases, we would only be going outside
our object in cases when an original shift would have been
undefined. */
- if (! spans_byte && GET_CODE (inner) == MEM
+ if (! spans_byte && MEM_P (inner)
&& ((pos_rtx == 0 && pos + len > GET_MODE_BITSIZE (is_mode))
|| (pos_rtx != 0 && len != 1)))
return 0;
/* If this is not from memory, the desired mode is wanted_inner_reg_mode;
if we have to change the mode of memory and cannot, the desired mode is
EXTRACTION_MODE. */
- if (GET_CODE (inner) != MEM)
+ if (!MEM_P (inner))
wanted_inner_mode = wanted_inner_reg_mode;
else if (inner_mode != wanted_inner_mode
&& (mode_dependent_address_p (XEXP (inner, 0))
If it's a MEM we need to recompute POS relative to that.
However, if we're extracting from (or inserting into) a register,
we want to recompute POS relative to wanted_inner_mode. */
- int width = (GET_CODE (inner) == MEM
+ int width = (MEM_P (inner)
? GET_MODE_BITSIZE (is_mode)
: GET_MODE_BITSIZE (wanted_inner_mode));
pos_rtx
= gen_rtx_MINUS (GET_MODE (pos_rtx), GEN_INT (width - len), pos_rtx);
/* POS may be less than 0 now, but we check for that below.
- Note that it can only be less than 0 if GET_CODE (inner) != MEM. */
+ Note that it can only be less than 0 if !MEM_P (inner). */
}
/* If INNER has a wider mode, make it smaller. If this is a constant
the value. */
if (wanted_inner_mode != VOIDmode
&& GET_MODE_SIZE (wanted_inner_mode) < GET_MODE_SIZE (is_mode)
- && ((GET_CODE (inner) == MEM
+ && ((MEM_P (inner)
&& (inner_mode == wanted_inner_mode
|| (! mode_dependent_address_p (XEXP (inner, 0))
&& ! MEM_VOLATILE_P (inner))))))
&& GET_MODE_SIZE (inner_mode) < GET_MODE_SIZE (is_mode))
offset -= GET_MODE_SIZE (is_mode) - GET_MODE_SIZE (inner_mode);
- /* If this is a constant position, we can move to the desired byte. */
+ /* If this is a constant position, we can move to the desired byte.
+ Be careful not to go beyond the original object and maintain the
+ natural alignment of the memory. */
if (pos_rtx == 0)
{
- offset += pos / BITS_PER_UNIT;
- pos %= GET_MODE_BITSIZE (wanted_inner_mode);
+ enum machine_mode bfmode = smallest_mode_for_size (len, MODE_INT);
+ offset += (pos / GET_MODE_BITSIZE (bfmode)) * GET_MODE_SIZE (bfmode);
+ pos %= GET_MODE_BITSIZE (bfmode);
}
if (BYTES_BIG_ENDIAN != BITS_BIG_ENDIAN
/* If INNER is not memory, we can always get it into the proper mode. If we
are changing its mode, POS must be a constant and smaller than the size
of the new mode. */
- else if (GET_CODE (inner) != MEM)
+ else if (!MEM_P (inner))
{
if (GET_MODE (inner) != wanted_inner_mode
&& (pos_rtx != 0
if (GET_CODE (XEXP (x, 1)) == CONST_INT
&& (INTVAL (XEXP (x, 1)) & ((((HOST_WIDE_INT) 1 << count)) - 1)) == 0
&& (tem = extract_left_shift (XEXP (x, 0), count)) != 0)
- return gen_binary (code, mode, tem,
- GEN_INT (INTVAL (XEXP (x, 1)) >> count));
+ return simplify_gen_binary (code, mode, tem,
+ GEN_INT (INTVAL (XEXP (x, 1)) >> count));
break;
what it originally did, do this SUBREG as a force_to_mode. */
tem = make_compound_operation (SUBREG_REG (x), in_code);
- if (GET_CODE (tem) != GET_CODE (SUBREG_REG (x))
- && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (tem))
- && subreg_lowpart_p (x))
- {
- rtx newer = force_to_mode (tem, mode, ~(HOST_WIDE_INT) 0,
- NULL_RTX, 0);
- /* If we have something other than a SUBREG, we might have
- done an expansion, so rerun ourselves. */
- if (GET_CODE (newer) != SUBREG)
- newer = make_compound_operation (newer, in_code);
+ {
+ rtx simplified;
+ simplified = simplify_subreg (GET_MODE (x), tem, GET_MODE (tem),
+ SUBREG_BYTE (x));
- return newer;
- }
+ if (simplified)
+ tem = simplified;
- /* If this is a paradoxical subreg, and the new code is a sign or
- zero extension, omit the subreg and widen the extension. If it
- is a regular subreg, we can still get rid of the subreg by not
- widening so much, or in fact removing the extension entirely. */
- if ((GET_CODE (tem) == SIGN_EXTEND
- || GET_CODE (tem) == ZERO_EXTEND)
- && subreg_lowpart_p (x))
- {
- if (GET_MODE_SIZE (mode) > GET_MODE_SIZE (GET_MODE (tem))
- || (GET_MODE_SIZE (mode) >
- GET_MODE_SIZE (GET_MODE (XEXP (tem, 0)))))
- {
- if (! SCALAR_INT_MODE_P (mode))
- break;
- tem = gen_rtx_fmt_e (GET_CODE (tem), mode, XEXP (tem, 0));
- }
- else
- tem = gen_lowpart (mode, XEXP (tem, 0));
+ if (GET_CODE (tem) != GET_CODE (SUBREG_REG (x))
+ && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (tem))
+ && subreg_lowpart_p (x))
+ {
+ rtx newer = force_to_mode (tem, mode, ~(HOST_WIDE_INT) 0,
+ NULL_RTX, 0);
+
+ /* If we have something other than a SUBREG, we might have
+ done an expansion, so rerun ourselves. */
+ if (GET_CODE (newer) != SUBREG)
+ newer = make_compound_operation (newer, in_code);
+
+ return newer;
+ }
+
+ if (simplified)
return tem;
- }
+ }
break;
default:
SUBST (XEXP (x, i), new);
}
+ /* If this is a commutative operation, the changes to the operands
+ may have made it noncanonical. */
+ if (COMMUTATIVE_ARITH_P (x)
+ && swap_commutative_operands_p (XEXP (x, 0), XEXP (x, 1)))
+ {
+ tem = XEXP (x, 0);
+ SUBST (XEXP (x, 0), XEXP (x, 1));
+ SUBST (XEXP (x, 1), tem);
+ }
+
return x;
}
\f
&& (GET_MODE_MASK (GET_MODE (x)) & ~mask) == 0)
return gen_lowpart (mode, x);
- /* If we aren't changing the mode, X is not a SUBREG, and all zero bits in
- MASK are already known to be zero in X, we need not do anything. */
- if (GET_MODE (x) == mode && code != SUBREG && (~mask & nonzero) == 0)
- return x;
-
switch (code)
{
case CLOBBER:
&& (cval & ((HOST_WIDE_INT) 1 << (width - 1))) != 0)
cval |= (HOST_WIDE_INT) -1 << width;
- y = gen_binary (AND, GET_MODE (x), XEXP (x, 0), GEN_INT (cval));
+ y = simplify_gen_binary (AND, GET_MODE (x),
+ XEXP (x, 0), GEN_INT (cval));
if (rtx_cost (y, SET) < rtx_cost (x, SET))
x = y;
}
{
temp = GEN_INT ((INTVAL (XEXP (x, 1)) & mask)
<< INTVAL (XEXP (XEXP (x, 0), 1)));
- temp = gen_binary (GET_CODE (x), GET_MODE (x),
- XEXP (XEXP (x, 0), 0), temp);
- x = gen_binary (LSHIFTRT, GET_MODE (x), temp,
- XEXP (XEXP (x, 0), 1));
+ temp = simplify_gen_binary (GET_CODE (x), GET_MODE (x),
+ XEXP (XEXP (x, 0), 0), temp);
+ x = simplify_gen_binary (LSHIFTRT, GET_MODE (x), temp,
+ XEXP (XEXP (x, 0), 1));
return force_to_mode (x, mode, mask, reg, next_select);
}
reg, next_select));
if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
- x = gen_binary (code, op_mode, op0, op1);
+ x = simplify_gen_binary (code, op_mode, op0, op1);
break;
case ASHIFT:
mask, reg, next_select));
if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0))
- x = gen_binary (code, op_mode, op0, XEXP (x, 1));
+ x = simplify_gen_binary (code, op_mode, op0, XEXP (x, 1));
break;
case LSHIFTRT:
/* We can only change the mode of the shift if we can do arithmetic
in the mode of the shift and INNER_MASK is no wider than the
- width of OP_MODE. */
- if (GET_MODE_BITSIZE (op_mode) > HOST_BITS_PER_WIDE_INT
- || (inner_mask & ~GET_MODE_MASK (op_mode)) != 0)
+ width of X's mode. */
+ if ((inner_mask & ~GET_MODE_MASK (GET_MODE (x))) != 0)
op_mode = GET_MODE (x);
inner = force_to_mode (inner, op_mode, inner_mask, reg, next_select);
if (GET_MODE (x) != op_mode || inner != XEXP (x, 0))
- x = gen_binary (LSHIFTRT, op_mode, inner, XEXP (x, 1));
+ x = simplify_gen_binary (LSHIFTRT, op_mode, inner, XEXP (x, 1));
}
/* If we have (and (lshiftrt FOO C1) C2) where the combination of the
/* Must be more sign bit copies than the mask needs. */
&& ((int) num_sign_bit_copies (XEXP (x, 0), GET_MODE (XEXP (x, 0)))
>= exact_log2 (mask + 1)))
- x = gen_binary (LSHIFTRT, GET_MODE (x), XEXP (x, 0),
- GEN_INT (GET_MODE_BITSIZE (GET_MODE (x))
- - exact_log2 (mask + 1)));
+ x = simplify_gen_binary (LSHIFTRT, GET_MODE (x), XEXP (x, 0),
+ GEN_INT (GET_MODE_BITSIZE (GET_MODE (x))
+ - exact_log2 (mask + 1)));
goto shiftrt;
/* If MASK is 1, convert this to an LSHIFTRT. This can be done
even if the shift count isn't a constant. */
if (mask == 1)
- x = gen_binary (LSHIFTRT, GET_MODE (x), XEXP (x, 0), XEXP (x, 1));
+ x = simplify_gen_binary (LSHIFTRT, GET_MODE (x),
+ XEXP (x, 0), XEXP (x, 1));
shiftrt:
{
temp = gen_int_mode (mask << INTVAL (XEXP (XEXP (x, 0), 1)),
GET_MODE (x));
- temp = gen_binary (XOR, GET_MODE (x), XEXP (XEXP (x, 0), 0), temp);
- x = gen_binary (LSHIFTRT, GET_MODE (x), temp, XEXP (XEXP (x, 0), 1));
+ temp = simplify_gen_binary (XOR, GET_MODE (x),
+ XEXP (XEXP (x, 0), 0), temp);
+ x = simplify_gen_binary (LSHIFTRT, GET_MODE (x),
+ temp, XEXP (XEXP (x, 0), 1));
return force_to_mode (x, mode, mask, reg, next_select);
}
in STORE_FLAG_VALUE and FOO has a single bit that might be nonzero,
which is equal to STORE_FLAG_VALUE. */
if ((mask & ~STORE_FLAG_VALUE) == 0 && XEXP (x, 1) == const0_rtx
+ && GET_MODE (XEXP (x, 0)) == mode
&& exact_log2 (nonzero_bits (XEXP (x, 0), mode)) >= 0
&& (nonzero_bits (XEXP (x, 0), mode)
== (unsigned HOST_WIDE_INT) STORE_FLAG_VALUE))
else if (cond1 == 0)
true1 = copy_rtx (true1);
- *ptrue = gen_binary (code, mode, true0, true1);
- *pfalse = gen_binary (code, mode, false0, false1);
+ if (COMPARISON_P (x))
+ {
+ *ptrue = simplify_gen_relational (code, mode, VOIDmode,
+ true0, true1);
+ *pfalse = simplify_gen_relational (code, mode, VOIDmode,
+ false0, false1);
+ }
+ else
+ {
+ *ptrue = simplify_gen_binary (code, mode, true0, true1);
+ *pfalse = simplify_gen_binary (code, mode, false0, false1);
+ }
+
return cond0 ? cond0 : cond1;
}
if (COMPARISON_P (cond0)
&& COMPARISON_P (cond1)
- && ((GET_CODE (cond0) == combine_reversed_comparison_code (cond1)
+ && ((GET_CODE (cond0) == reversed_comparison_code (cond1, NULL)
&& rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 0))
&& rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 1)))
|| ((swap_condition (GET_CODE (cond0))
- == combine_reversed_comparison_code (cond1))
+ == reversed_comparison_code (cond1, NULL))
&& rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 1))
&& rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 0))))
&& ! side_effects_p (x))
{
- *ptrue = gen_binary (MULT, mode, op0, const_true_rtx);
- *pfalse = gen_binary (MULT, mode,
- (code == MINUS
- ? simplify_gen_unary (NEG, mode, op1,
- mode)
- : op1),
- const_true_rtx);
+ *ptrue = simplify_gen_binary (MULT, mode, op0, const_true_rtx);
+ *pfalse = simplify_gen_binary (MULT, mode,
+ (code == MINUS
+ ? simplify_gen_unary (NEG, mode,
+ op1, mode)
+ : op1),
+ const_true_rtx);
return cond0;
}
}
if (COMPARISON_P (cond0)
&& COMPARISON_P (cond1)
- && ((GET_CODE (cond0) == combine_reversed_comparison_code (cond1)
+ && ((GET_CODE (cond0) == reversed_comparison_code (cond1, NULL)
&& rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 0))
&& rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 1)))
|| ((swap_condition (GET_CODE (cond0))
- == combine_reversed_comparison_code (cond1))
+ == reversed_comparison_code (cond1, NULL))
&& rtx_equal_p (XEXP (cond0, 0), XEXP (cond1, 1))
&& rtx_equal_p (XEXP (cond0, 1), XEXP (cond1, 0))))
&& ! side_effects_p (x))
if (comparison_dominates_p (cond, code))
return const_true_rtx;
- code = combine_reversed_comparison_code (x);
+ code = reversed_comparison_code (x, NULL);
if (code != UNKNOWN
&& comparison_dominates_p (cond, code))
return const0_rtx;
/* Check for a paradoxical SUBREG of a MEM compared with the MEM.
Note that all SUBREGs of MEM are paradoxical; otherwise they
would have been rewritten. */
- if (GET_CODE (x) == MEM && GET_CODE (y) == SUBREG
- && GET_CODE (SUBREG_REG (y)) == MEM
+ if (MEM_P (x) && GET_CODE (y) == SUBREG
+ && MEM_P (SUBREG_REG (y))
&& rtx_equal_p (SUBREG_REG (y),
gen_lowpart (GET_MODE (SUBREG_REG (y)), x)))
return 1;
- if (GET_CODE (y) == MEM && GET_CODE (x) == SUBREG
- && GET_CODE (SUBREG_REG (x)) == MEM
+ if (MEM_P (y) && GET_CODE (x) == SUBREG
+ && MEM_P (SUBREG_REG (x))
&& rtx_equal_p (SUBREG_REG (x),
gen_lowpart (GET_MODE (SUBREG_REG (x)), y)))
return 1;
return x;
}
- else if (GET_CODE (src) == AND && GET_CODE (XEXP (src, 0)) == SUBREG
- && subreg_lowpart_p (XEXP (src, 0))
- && (GET_MODE_SIZE (GET_MODE (XEXP (src, 0)))
- < GET_MODE_SIZE (GET_MODE (SUBREG_REG (XEXP (src, 0)))))
- && GET_CODE (SUBREG_REG (XEXP (src, 0))) == ROTATE
- && GET_CODE (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == CONST_INT
- && INTVAL (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == -2
- && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
+ if (GET_CODE (src) == AND && GET_CODE (XEXP (src, 0)) == SUBREG
+ && subreg_lowpart_p (XEXP (src, 0))
+ && (GET_MODE_SIZE (GET_MODE (XEXP (src, 0)))
+ < GET_MODE_SIZE (GET_MODE (SUBREG_REG (XEXP (src, 0)))))
+ && GET_CODE (SUBREG_REG (XEXP (src, 0))) == ROTATE
+ && GET_CODE (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == CONST_INT
+ && INTVAL (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == -2
+ && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
{
assign = make_extraction (VOIDmode, dest, 0,
XEXP (SUBREG_REG (XEXP (src, 0)), 1),
/* If SRC is (ior (ashift (const_int 1) POS) DEST), this is a set of a
one-bit field. */
- else if (GET_CODE (src) == IOR && GET_CODE (XEXP (src, 0)) == ASHIFT
- && XEXP (XEXP (src, 0), 0) == const1_rtx
- && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
+ if (GET_CODE (src) == IOR && GET_CODE (XEXP (src, 0)) == ASHIFT
+ && XEXP (XEXP (src, 0), 0) == const1_rtx
+ && rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
{
assign = make_extraction (VOIDmode, dest, 0, XEXP (XEXP (src, 0), 1),
1, 1, 1, 0);
return x;
}
+ /* If DEST is already a field assignment, i.e. ZERO_EXTRACT, and the
+ SRC is an AND with all bits of that field set, then we can discard
+ the AND. */
+ if (GET_CODE (dest) == ZERO_EXTRACT
+ && GET_CODE (XEXP (dest, 1)) == CONST_INT
+ && GET_CODE (src) == AND
+ && GET_CODE (XEXP (src, 1)) == CONST_INT)
+ {
+ HOST_WIDE_INT width = INTVAL (XEXP (dest, 1));
+ unsigned HOST_WIDE_INT and_mask = INTVAL (XEXP (src, 1));
+ unsigned HOST_WIDE_INT ze_mask;
+
+ if (width >= HOST_BITS_PER_WIDE_INT)
+ ze_mask = -1;
+ else
+ ze_mask = ((unsigned HOST_WIDE_INT)1 << width) - 1;
+
+ /* Complete overlap. We can remove the source AND. */
+ if ((and_mask & ze_mask) == ze_mask)
+ return gen_rtx_SET (VOIDmode, dest, XEXP (src, 0));
+
+ /* Partial overlap. We can reduce the source AND. */
+ if ((and_mask & ze_mask) != and_mask)
+ {
+ mode = GET_MODE (src);
+ src = gen_rtx_AND (mode, XEXP (src, 0),
+ gen_int_mode (and_mask & ze_mask, mode));
+ return gen_rtx_SET (VOIDmode, dest, src);
+ }
+ }
+
/* The other case we handle is assignments into a constant-position
field. They look like (ior/xor (and DEST C1) OTHER). If C1 represents
a mask that has all one bits except for a group of zero bits and
break;
case SUBREG:
- /* Non-paradoxical SUBREGs distributes over all operations, provided
- the inner modes and byte offsets are the same, this is an extraction
- of a low-order part, we don't convert an fp operation to int or
- vice versa, and we would not be converting a single-word
- operation into a multi-word operation. The latter test is not
- required, but it prevents generating unneeded multi-word operations.
- Some of the previous tests are redundant given the latter test, but
- are retained because they are required for correctness.
+ /* Non-paradoxical SUBREGs distributes over all operations,
+ provided the inner modes and byte offsets are the same, this
+ is an extraction of a low-order part, we don't convert an fp
+ operation to int or vice versa, this is not a vector mode,
+ and we would not be converting a single-word operation into a
+ multi-word operation. The latter test is not required, but
+ it prevents generating unneeded multi-word operations. Some
+ of the previous tests are redundant given the latter test,
+ but are retained because they are required for correctness.
We produce the result slightly differently in this case. */
!= GET_MODE_CLASS (GET_MODE (SUBREG_REG (lhs))))
|| (GET_MODE_SIZE (GET_MODE (lhs))
> GET_MODE_SIZE (GET_MODE (SUBREG_REG (lhs))))
+ || VECTOR_MODE_P (GET_MODE (lhs))
|| GET_MODE_SIZE (GET_MODE (SUBREG_REG (lhs))) > UNITS_PER_WORD)
return x;
- tem = gen_binary (code, GET_MODE (SUBREG_REG (lhs)),
- SUBREG_REG (lhs), SUBREG_REG (rhs));
+ tem = simplify_gen_binary (code, GET_MODE (SUBREG_REG (lhs)),
+ SUBREG_REG (lhs), SUBREG_REG (rhs));
return gen_lowpart (GET_MODE (x), tem);
default:
return x;
/* Form the new inner operation, seeing if it simplifies first. */
- tem = gen_binary (code, GET_MODE (x), lhs, rhs);
+ tem = simplify_gen_binary (code, GET_MODE (x), lhs, rhs);
/* There is one exception to the general way of distributing:
(a | c) ^ (b | c) -> (a ^ b) & ~c */
/* We may be able to continuing distributing the result, so call
ourselves recursively on the inner operation before forming the
outer operation, which we return. */
- return gen_binary (inner_code, GET_MODE (x),
- apply_distributive_law (tem), other);
+ return simplify_gen_binary (inner_code, GET_MODE (x),
+ apply_distributive_law (tem), other);
+}
+
+/* See if X is of the form (* (+ A B) C), and if so convert to
+ (+ (* A C) (* B C)) and try to simplify.
+
+ Most of the time, this results in no change. However, if some of
+ the operands are the same or inverses of each other, simplifications
+ will result.
+
+ For example, (and (ior A B) (not B)) can occur as the result of
+ expanding a bit field assignment. When we apply the distributive
+ law to this, we get (ior (and (A (not B))) (and (B (not B)))),
+ which then simplifies to (and (A (not B))).
+
+ Note that no checks happen on the validity of applying the inverse
+ distributive law. This is pointless since we can do it in the
+ few places where this routine is called.
+
+ N is the index of the term that is decomposed (the arithmetic operation,
+ i.e. (+ A B) in the first example above). !N is the index of the term that
+ is distributed, i.e. of C in the first example above. */
+static rtx
+distribute_and_simplify_rtx (rtx x, int n)
+{
+ enum machine_mode mode;
+ enum rtx_code outer_code, inner_code;
+ rtx decomposed, distributed, inner_op0, inner_op1, new_op0, new_op1, tmp;
+
+ decomposed = XEXP (x, n);
+ if (!ARITHMETIC_P (decomposed))
+ return NULL_RTX;
+
+ mode = GET_MODE (x);
+ outer_code = GET_CODE (x);
+ distributed = XEXP (x, !n);
+
+ inner_code = GET_CODE (decomposed);
+ inner_op0 = XEXP (decomposed, 0);
+ inner_op1 = XEXP (decomposed, 1);
+
+ /* Special case (and (xor B C) (not A)), which is equivalent to
+ (xor (ior A B) (ior A C)) */
+ if (outer_code == AND && inner_code == XOR && GET_CODE (distributed) == NOT)
+ {
+ distributed = XEXP (distributed, 0);
+ outer_code = IOR;
+ }
+
+ if (n == 0)
+ {
+ /* Distribute the second term. */
+ new_op0 = simplify_gen_binary (outer_code, mode, inner_op0, distributed);
+ new_op1 = simplify_gen_binary (outer_code, mode, inner_op1, distributed);
+ }
+ else
+ {
+ /* Distribute the first term. */
+ new_op0 = simplify_gen_binary (outer_code, mode, distributed, inner_op0);
+ new_op1 = simplify_gen_binary (outer_code, mode, distributed, inner_op1);
+ }
+
+ tmp = apply_distributive_law (simplify_gen_binary (inner_code, mode,
+ new_op0, new_op1));
+ if (GET_CODE (tmp) != outer_code
+ && rtx_cost (tmp, SET) < rtx_cost (x, SET))
+ return tmp;
+
+ return NULL_RTX;
}
\f
/* We have X, a logical `and' of VAROP with the constant CONSTOP, to be done
/* If VAROP is a CONST_INT, then we need to apply the mask in CONSTOP
to VAROP and return the new constant. */
if (GET_CODE (varop) == CONST_INT)
- return GEN_INT (trunc_int_for_mode (INTVAL (varop) & constop, mode));
+ return gen_int_mode (INTVAL (varop) & constop, mode);
/* See what bits may be nonzero in VAROP. Unlike the general case of
a call to nonzero_bits, here we don't care about bits outside
gen_lowpart
(mode,
apply_distributive_law
- (gen_binary (GET_CODE (varop), GET_MODE (varop),
- simplify_and_const_int (NULL_RTX, GET_MODE (varop),
- XEXP (varop, 0), constop),
- simplify_and_const_int (NULL_RTX, GET_MODE (varop),
- XEXP (varop, 1), constop))));
+ (simplify_gen_binary (GET_CODE (varop), GET_MODE (varop),
+ simplify_and_const_int (NULL_RTX,
+ GET_MODE (varop),
+ XEXP (varop, 0),
+ constop),
+ simplify_and_const_int (NULL_RTX,
+ GET_MODE (varop),
+ XEXP (varop, 1),
+ constop))));
/* If VAROP is PLUS, and the constant is a mask of low bite, distribute
the AND and see if one of the operands simplifies to zero. If so, we
constop = trunc_int_for_mode (constop, mode);
/* See how much, if any, of X we can use. */
if (x == 0 || GET_CODE (x) != AND || GET_MODE (x) != mode)
- x = gen_binary (AND, mode, varop, GEN_INT (constop));
+ x = simplify_gen_binary (AND, mode, varop, GEN_INT (constop));
else
{
&& (reg_stat[REGNO (x)].last_set_label == label_tick
|| (REGNO (x) >= FIRST_PSEUDO_REGISTER
&& REG_N_SETS (REGNO (x)) == 1
- && ! REGNO_REG_SET_P (ENTRY_BLOCK_PTR->next_bb->global_live_at_start,
- REGNO (x))))
+ && ! REGNO_REG_SET_P
+ (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start,
+ REGNO (x))))
&& INSN_CUID (reg_stat[REGNO (x)].last_set) < subst_low_cuid)
{
*nonzero &= reg_stat[REGNO (x)].last_set_nonzero_bits;
&& (reg_stat[REGNO (x)].last_set_label == label_tick
|| (REGNO (x) >= FIRST_PSEUDO_REGISTER
&& REG_N_SETS (REGNO (x)) == 1
- && ! REGNO_REG_SET_P (ENTRY_BLOCK_PTR->next_bb->global_live_at_start,
- REGNO (x))))
+ && ! REGNO_REG_SET_P
+ (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start,
+ REGNO (x))))
&& INSN_CUID (reg_stat[REGNO (x)].last_set) < subst_low_cuid)
{
*result = reg_stat[REGNO (x)].last_set_sign_bit_copies;
the width of this mode matter. It is assumed that the width of this mode
is smaller than or equal to HOST_BITS_PER_WIDE_INT.
- If *POP0 or OP1 are NIL, it means no operation is required. Only NEG, PLUS,
+ If *POP0 or OP1 are UNKNOWN, it means no operation is required. Only NEG, PLUS,
IOR, XOR, and AND are supported. We may set *POP0 to SET if the proper
result is simply *PCONST0.
if (op0 == AND)
const1 &= const0;
- /* If OP0 or OP1 is NIL, this is easy. Similarly if they are the same or
+ /* If OP0 or OP1 is UNKNOWN, this is easy. Similarly if they are the same or
if OP0 is SET. */
- if (op1 == NIL || op0 == SET)
+ if (op1 == UNKNOWN || op0 == SET)
return 1;
- else if (op0 == NIL)
+ else if (op0 == UNKNOWN)
op0 = op1, const0 = const1;
else if (op0 == op1)
const0 += const1;
break;
case NEG:
- op0 = NIL;
+ op0 = UNKNOWN;
break;
default:
break;
const0 &= GET_MODE_MASK (mode);
if (const0 == 0
&& (op0 == IOR || op0 == XOR || op0 == PLUS))
- op0 = NIL;
+ op0 = UNKNOWN;
else if (const0 == 0 && op0 == AND)
op0 = SET;
else if ((unsigned HOST_WIDE_INT) const0 == GET_MODE_MASK (mode)
&& op0 == AND)
- op0 = NIL;
+ op0 = UNKNOWN;
/* ??? Slightly redundant with the above mask, but not entirely.
Moving this above means we'd have to sign-extend the mode mask
unsigned int mode_words
= (GET_MODE_SIZE (mode) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD;
/* We form (outer_op (code varop count) (outer_const)). */
- enum rtx_code outer_op = NIL;
+ enum rtx_code outer_op = UNKNOWN;
HOST_WIDE_INT outer_const = 0;
rtx const_rtx;
int complement_p = 0;
&& exact_log2 (INTVAL (XEXP (varop, 1))) >= 0)
{
varop
- = gen_binary (ASHIFT, GET_MODE (varop), XEXP (varop, 0),
- GEN_INT (exact_log2 (INTVAL (XEXP (varop, 1)))));
+ = simplify_gen_binary (ASHIFT, GET_MODE (varop),
+ XEXP (varop, 0),
+ GEN_INT (exact_log2 (
+ INTVAL (XEXP (varop, 1)))));
continue;
}
break;
&& exact_log2 (INTVAL (XEXP (varop, 1))) >= 0)
{
varop
- = gen_binary (LSHIFTRT, GET_MODE (varop), XEXP (varop, 0),
- GEN_INT (exact_log2 (INTVAL (XEXP (varop, 1)))));
+ = simplify_gen_binary (LSHIFTRT, GET_MODE (varop),
+ XEXP (varop, 0),
+ GEN_INT (exact_log2 (
+ INTVAL (XEXP (varop, 1)))));
continue;
}
break;
logical expression, make a new logical expression, and apply
the inverse distributive law. This also can't be done
for some (ashiftrt (xor)). */
- if (code != ASHIFTRT || GET_CODE (varop)!= XOR
- || 0 <= trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
- shift_mode))
+ if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ && !(code == ASHIFTRT && GET_CODE (varop) == XOR
+ && 0 > trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
+ shift_mode)))
{
rtx lhs = simplify_shift_const (NULL_RTX, code, shift_mode,
XEXP (varop, 0), count);
rtx rhs = simplify_shift_const (NULL_RTX, code, shift_mode,
XEXP (varop, 1), count);
- varop = gen_binary (GET_CODE (varop), shift_mode, lhs, rhs);
+ varop = simplify_gen_binary (GET_CODE (varop), shift_mode,
+ lhs, rhs);
varop = apply_distributive_law (varop);
count = 0;
+ continue;
}
break;
varop = XEXP (varop, 0);
continue;
}
+
+ /* Check for 'PLUS signbit', which is the canonical form of 'XOR
+ signbit', and attempt to change the PLUS to an XOR and move it to
+ the outer operation as is done above in the AND/IOR/XOR case
+ leg for shift(logical). See details in logical handling above
+ for reasoning in doing so. */
+ if (code == LSHIFTRT
+ && GET_CODE (XEXP (varop, 1)) == CONST_INT
+ && mode_signbit_p (result_mode, XEXP (varop, 1))
+ && (new = simplify_binary_operation (code, result_mode,
+ XEXP (varop, 1),
+ GEN_INT (count))) != 0
+ && GET_CODE (new) == CONST_INT
+ && merge_outer_ops (&outer_op, &outer_const, XOR,
+ INTVAL (new), result_mode, &complement_p))
+ {
+ varop = XEXP (varop, 0);
+ continue;
+ }
+
break;
case MINUS:
/* We have now finished analyzing the shift. The result should be
a shift of type CODE with SHIFT_MODE shifting VAROP COUNT places. If
- OUTER_OP is non-NIL, it is an operation that needs to be applied
+ OUTER_OP is non-UNKNOWN, it is an operation that needs to be applied
to the result of the shift. OUTER_CONST is the relevant constant,
but we must turn off all bits turned off in the shift.
for the outer operation. So try to do the simplification
recursively. */
- if (outer_op != NIL && GET_CODE (x) == code
+ if (outer_op != UNKNOWN && GET_CODE (x) == code
&& GET_CODE (XEXP (x, 1)) == CONST_INT)
x = simplify_shift_const (x, code, shift_mode, XEXP (x, 0),
INTVAL (XEXP (x, 1)));
if (complement_p)
x = simplify_gen_unary (NOT, result_mode, x, result_mode);
- if (outer_op != NIL)
+ if (outer_op != UNKNOWN)
{
if (GET_MODE_BITSIZE (result_mode) < HOST_BITS_PER_WIDE_INT)
outer_const = trunc_int_for_mode (outer_const, result_mode);
else if (GET_RTX_CLASS (outer_op) == RTX_UNARY)
x = simplify_gen_unary (outer_op, result_mode, x, result_mode);
else
- x = gen_binary (outer_op, result_mode, x, GEN_INT (outer_const));
+ x = simplify_gen_binary (outer_op, result_mode, x,
+ GEN_INT (outer_const));
}
return x;
for (i = XVECLEN (newpat, 0) - num_clobbers_to_add;
i < XVECLEN (newpat, 0); i++)
{
- if (GET_CODE (XEXP (XVECEXP (newpat, 0, i), 0)) == REG
+ if (REG_P (XEXP (XVECEXP (newpat, 0, i), 0))
&& ! reg_dead_at_p (XEXP (XVECEXP (newpat, 0, i), 0), insn))
return -1;
notes = gen_rtx_EXPR_LIST (REG_UNUSED,
An insn containing that will not be recognized. */
static rtx
-gen_lowpart_for_combine (enum machine_mode mode, rtx x)
+gen_lowpart_for_combine (enum machine_mode omode, rtx x)
{
+ enum machine_mode imode = GET_MODE (x);
+ unsigned int osize = GET_MODE_SIZE (omode);
+ unsigned int isize = GET_MODE_SIZE (imode);
rtx result;
- if (GET_MODE (x) == mode)
+ if (omode == imode)
return x;
- /* Return identity if this is a CONST or symbolic
- reference. */
- if (mode == Pmode
+ /* Return identity if this is a CONST or symbolic reference. */
+ if (omode == Pmode
&& (GET_CODE (x) == CONST
|| GET_CODE (x) == SYMBOL_REF
|| GET_CODE (x) == LABEL_REF))
/* We can only support MODE being wider than a word if X is a
constant integer or has a mode the same size. */
-
- if (GET_MODE_SIZE (mode) > UNITS_PER_WORD
- && ! ((GET_MODE (x) == VOIDmode
+ if (GET_MODE_SIZE (omode) > UNITS_PER_WORD
+ && ! ((imode == VOIDmode
&& (GET_CODE (x) == CONST_INT
|| GET_CODE (x) == CONST_DOUBLE))
- || GET_MODE_SIZE (GET_MODE (x)) == GET_MODE_SIZE (mode)))
- return gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
+ || isize == osize))
+ goto fail;
/* X might be a paradoxical (subreg (mem)). In that case, gen_lowpart
won't know what to do. So we will strip off the SUBREG here and
process normally. */
- if (GET_CODE (x) == SUBREG && GET_CODE (SUBREG_REG (x)) == MEM)
+ if (GET_CODE (x) == SUBREG && MEM_P (SUBREG_REG (x)))
{
x = SUBREG_REG (x);
- if (GET_MODE (x) == mode)
+
+ /* For use in case we fall down into the address adjustments
+ further below, we need to adjust the known mode and size of
+ x; imode and isize, since we just adjusted x. */
+ imode = GET_MODE (x);
+
+ if (imode == omode)
return x;
+
+ isize = GET_MODE_SIZE (imode);
}
- result = gen_lowpart_common (mode, x);
+ result = gen_lowpart_common (omode, x);
+
#ifdef CANNOT_CHANGE_MODE_CLASS
- if (result != 0
- && GET_CODE (result) == SUBREG
- && GET_CODE (SUBREG_REG (result)) == REG
- && REGNO (SUBREG_REG (result)) >= FIRST_PSEUDO_REGISTER)
- bitmap_set_bit (&subregs_of_mode, REGNO (SUBREG_REG (result))
- * MAX_MACHINE_MODE
- + GET_MODE (result));
+ if (result != 0 && GET_CODE (result) == SUBREG)
+ record_subregs_of_mode (result);
#endif
if (result)
return result;
- if (GET_CODE (x) == MEM)
+ if (MEM_P (x))
{
int offset = 0;
/* Refuse to work on a volatile memory ref or one with a mode-dependent
address. */
if (MEM_VOLATILE_P (x) || mode_dependent_address_p (XEXP (x, 0)))
- return gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
+ goto fail;
/* If we want to refer to something bigger than the original memref,
generate a paradoxical subreg instead. That will force a reload
of the original memref X. */
- if (GET_MODE_SIZE (GET_MODE (x)) < GET_MODE_SIZE (mode))
- return gen_rtx_SUBREG (mode, x, 0);
+ if (isize < osize)
+ return gen_rtx_SUBREG (omode, x, 0);
if (WORDS_BIG_ENDIAN)
- offset = (MAX (GET_MODE_SIZE (GET_MODE (x)), UNITS_PER_WORD)
- - MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD));
+ offset = MAX (isize, UNITS_PER_WORD) - MAX (osize, UNITS_PER_WORD);
+ /* Adjust the address so that the address-after-the-data is
+ unchanged. */
if (BYTES_BIG_ENDIAN)
- {
- /* Adjust the address so that the address-after-the-data is
- unchanged. */
- offset -= (MIN (UNITS_PER_WORD, GET_MODE_SIZE (mode))
- - MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (x))));
- }
+ offset -= MIN (UNITS_PER_WORD, osize) - MIN (UNITS_PER_WORD, isize);
- return adjust_address_nv (x, mode, offset);
+ return adjust_address_nv (x, omode, offset);
}
/* If X is a comparison operator, rewrite it in a new mode. This
probably won't match, but may allow further simplifications. */
else if (COMPARISON_P (x))
- return gen_rtx_fmt_ee (GET_CODE (x), mode, XEXP (x, 0), XEXP (x, 1));
+ return gen_rtx_fmt_ee (GET_CODE (x), omode, XEXP (x, 0), XEXP (x, 1));
/* If we couldn't simplify X any other way, just enclose it in a
SUBREG. Normally, this SUBREG won't match, but some patterns may
{
int offset = 0;
rtx res;
- enum machine_mode sub_mode = GET_MODE (x);
- offset = subreg_lowpart_offset (mode, sub_mode);
- if (sub_mode == VOIDmode)
+ offset = subreg_lowpart_offset (omode, imode);
+ if (imode == VOIDmode)
{
- sub_mode = int_mode_for_mode (mode);
- x = gen_lowpart_common (sub_mode, x);
- if (x == 0)
- return gen_rtx_CLOBBER (VOIDmode, const0_rtx);
+ imode = int_mode_for_mode (omode);
+ x = gen_lowpart_common (imode, x);
+ if (x == NULL)
+ goto fail;
}
- res = simplify_gen_subreg (mode, x, sub_mode, offset);
+ res = simplify_gen_subreg (omode, x, imode, offset);
if (res)
return res;
- return gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
}
-}
-\f
-/* These routines make binary and unary operations by first seeing if they
- fold; if not, a new expression is allocated. */
-static rtx
-gen_binary (enum rtx_code code, enum machine_mode mode, rtx op0, rtx op1)
-{
- rtx result;
- rtx tem;
-
- if (GET_CODE (op0) == CLOBBER)
- return op0;
- else if (GET_CODE (op1) == CLOBBER)
- return op1;
-
- if (GET_RTX_CLASS (code) == RTX_COMM_ARITH
- && swap_commutative_operands_p (op0, op1))
- tem = op0, op0 = op1, op1 = tem;
-
- if (GET_RTX_CLASS (code) == RTX_COMPARE
- || GET_RTX_CLASS (code) == RTX_COMM_COMPARE)
- {
- enum machine_mode op_mode = GET_MODE (op0);
-
- /* Strip the COMPARE from (REL_OP (compare X Y) 0) to get
- just (REL_OP X Y). */
- if (GET_CODE (op0) == COMPARE && op1 == const0_rtx)
- {
- op1 = XEXP (op0, 1);
- op0 = XEXP (op0, 0);
- op_mode = GET_MODE (op0);
- }
-
- if (op_mode == VOIDmode)
- op_mode = GET_MODE (op1);
- result = simplify_relational_operation (code, mode, op_mode, op0, op1);
- }
- else
- result = simplify_binary_operation (code, mode, op0, op1);
-
- if (result)
- return result;
-
- /* Put complex operands first and constants second. */
- if (GET_RTX_CLASS (code) == RTX_COMM_ARITH
- && swap_commutative_operands_p (op0, op1))
- return gen_rtx_fmt_ee (code, mode, op1, op0);
-
- /* If we are turning off bits already known off in OP0, we need not do
- an AND. */
- else if (code == AND && GET_CODE (op1) == CONST_INT
- && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
- && (nonzero_bits (op0, mode) & ~INTVAL (op1)) == 0)
- return op0;
-
- return gen_rtx_fmt_ee (code, mode, op0, op1);
+ fail:
+ return gen_rtx_CLOBBER (imode, const0_rtx);
}
\f
/* Simplify a comparison between *POP0 and *POP1 where CODE is the
break;
case GEU:
- /* >= C is equivalent to < (C - 1). */
+ /* >= C is equivalent to > (C - 1). */
if (const_op > 1)
{
const_op -= 1;
break;
case SIGN_EXTEND:
- /* Can simplify (compare (zero/sign_extend FOO) CONST)
- to (compare FOO CONST) if CONST fits in FOO's mode and we
- are either testing inequality or have an unsigned comparison
- with ZERO_EXTEND or a signed comparison with SIGN_EXTEND. */
- if (! unsigned_comparison_p
- && (GET_MODE_BITSIZE (GET_MODE (XEXP (op0, 0)))
- <= HOST_BITS_PER_WIDE_INT)
+ /* Can simplify (compare (zero/sign_extend FOO) CONST) to
+ (compare FOO CONST) if CONST fits in FOO's mode and we
+ are either testing inequality or have an unsigned
+ comparison with ZERO_EXTEND or a signed comparison with
+ SIGN_EXTEND. But don't do it if we don't have a compare
+ insn of the given mode, since we'd have to revert it
+ later on, and then we wouldn't know whether to sign- or
+ zero-extend. */
+ mode = GET_MODE (XEXP (op0, 0));
+ if (mode != VOIDmode && GET_MODE_CLASS (mode) == MODE_INT
+ && ! unsigned_comparison_p
+ && (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
&& ((unsigned HOST_WIDE_INT) const_op
- < (((unsigned HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (GET_MODE (XEXP (op0, 0))) - 1)))))
+ < (((unsigned HOST_WIDE_INT) 1
+ << (GET_MODE_BITSIZE (mode) - 1))))
+ && cmp_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
{
op0 = XEXP (op0, 0);
continue;
break;
case SUBREG:
- /* Check for the case where we are comparing A - C1 with C2,
- both constants are smaller than 1/2 the maximum positive
- value in MODE, and the comparison is equality or unsigned.
- In that case, if A is either zero-extended to MODE or has
- sufficient sign bits so that the high-order bit in MODE
- is a copy of the sign in the inner mode, we can prove that it is
- safe to do the operation in the wider mode. This simplifies
- many range checks. */
+ /* Check for the case where we are comparing A - C1 with C2, that is
+
+ (subreg:MODE (plus (A) (-C1))) op (C2)
+
+ with C1 a constant, and try to lift the SUBREG, i.e. to do the
+ comparison in the wider mode. One of the following two conditions
+ must be true in order for this to be valid:
+
+ 1. The mode extension results in the same bit pattern being added
+ on both sides and the comparison is equality or unsigned. As
+ C2 has been truncated to fit in MODE, the pattern can only be
+ all 0s or all 1s.
+
+ 2. The mode extension results in the sign bit being copied on
+ each side.
+
+ The difficulty here is that we have predicates for A but not for
+ (A - C1) so we need to check that C1 is within proper bounds so
+ as to perturbate A as little as possible. */
if (mode_width <= HOST_BITS_PER_WIDE_INT
&& subreg_lowpart_p (op0)
+ && GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0))) > mode_width
&& GET_CODE (SUBREG_REG (op0)) == PLUS
- && GET_CODE (XEXP (SUBREG_REG (op0), 1)) == CONST_INT
- && INTVAL (XEXP (SUBREG_REG (op0), 1)) < 0
- && (-INTVAL (XEXP (SUBREG_REG (op0), 1))
- < (HOST_WIDE_INT) (GET_MODE_MASK (mode) / 2))
- && (unsigned HOST_WIDE_INT) const_op < GET_MODE_MASK (mode) / 2
- && (0 == (nonzero_bits (XEXP (SUBREG_REG (op0), 0),
- GET_MODE (SUBREG_REG (op0)))
- & ~GET_MODE_MASK (mode))
- || (num_sign_bit_copies (XEXP (SUBREG_REG (op0), 0),
- GET_MODE (SUBREG_REG (op0)))
- > (unsigned int)
- (GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0)))
- - GET_MODE_BITSIZE (mode)))))
- {
- op0 = SUBREG_REG (op0);
- continue;
+ && GET_CODE (XEXP (SUBREG_REG (op0), 1)) == CONST_INT)
+ {
+ enum machine_mode inner_mode = GET_MODE (SUBREG_REG (op0));
+ rtx a = XEXP (SUBREG_REG (op0), 0);
+ HOST_WIDE_INT c1 = -INTVAL (XEXP (SUBREG_REG (op0), 1));
+
+ if ((c1 > 0
+ && (unsigned HOST_WIDE_INT) c1
+ < (unsigned HOST_WIDE_INT) 1 << (mode_width - 1)
+ && (equality_comparison_p || unsigned_comparison_p)
+ /* (A - C1) zero-extends if it is positive and sign-extends
+ if it is negative, C2 both zero- and sign-extends. */
+ && ((0 == (nonzero_bits (a, inner_mode)
+ & ~GET_MODE_MASK (mode))
+ && const_op >= 0)
+ /* (A - C1) sign-extends if it is positive and 1-extends
+ if it is negative, C2 both sign- and 1-extends. */
+ || (num_sign_bit_copies (a, inner_mode)
+ > (unsigned int) (GET_MODE_BITSIZE (inner_mode)
+ - mode_width)
+ && const_op < 0)))
+ || ((unsigned HOST_WIDE_INT) c1
+ < (unsigned HOST_WIDE_INT) 1 << (mode_width - 2)
+ /* (A - C1) always sign-extends, like C2. */
+ && num_sign_bit_copies (a, inner_mode)
+ > (unsigned int) (GET_MODE_BITSIZE (inner_mode)
+ - (mode_width - 1))))
+ {
+ op0 = SUBREG_REG (op0);
+ continue;
+ }
}
/* If the inner mode is narrower and we are extracting the low part,
/* ... fall through ... */
case ZERO_EXTEND:
- if ((unsigned_comparison_p || equality_comparison_p)
- && (GET_MODE_BITSIZE (GET_MODE (XEXP (op0, 0)))
- <= HOST_BITS_PER_WIDE_INT)
- && ((unsigned HOST_WIDE_INT) const_op
- < GET_MODE_MASK (GET_MODE (XEXP (op0, 0)))))
+ mode = GET_MODE (XEXP (op0, 0));
+ if (mode != VOIDmode && GET_MODE_CLASS (mode) == MODE_INT
+ && (unsigned_comparison_p || equality_comparison_p)
+ && (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
+ && ((unsigned HOST_WIDE_INT) const_op < GET_MODE_MASK (mode))
+ && cmp_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
{
op0 = XEXP (op0, 0);
continue;
if (code == LT || code == NE)
new_code = GET_CODE (op0);
else
- new_code = combine_reversed_comparison_code (op0);
+ new_code = reversed_comparison_code (op0, NULL);
if (new_code != UNKNOWN)
{
&& c1 != mask
&& c1 != GET_MODE_MASK (tmode))
{
- op0 = gen_binary (AND, tmode,
- SUBREG_REG (XEXP (op0, 0)),
- gen_int_mode (c1, tmode));
+ op0 = simplify_gen_binary (AND, tmode,
+ SUBREG_REG (XEXP (op0, 0)),
+ gen_int_mode (c1, tmode));
op0 = gen_lowpart (mode, op0);
continue;
}
{
rtx inner = XEXP (XEXP (XEXP (op0, 0), 0), 0);
rtx add_const = XEXP (XEXP (op0, 0), 1);
- rtx new_const = gen_binary (ASHIFTRT, GET_MODE (op0), add_const,
- XEXP (op0, 1));
+ rtx new_const = simplify_gen_binary (ASHIFTRT, GET_MODE (op0),
+ add_const, XEXP (op0, 1));
- op0 = gen_binary (PLUS, tmode,
- gen_lowpart (tmode, inner),
- new_const);
+ op0 = simplify_gen_binary (PLUS, tmode,
+ gen_lowpart (tmode, inner),
+ new_const);
continue;
}
those bits.
3. SUBREG_REG (op0) is a memory and LOAD_EXTEND_OP is defined and not
- NIL. In that case we know those bits are zeros or ones. We must
+ UNKNOWN. In that case we know those bits are zeros or ones. We must
also be sure that they are the same as the upper bits of op1.
We can never remove a SUBREG for a non-equality comparison because
{
/* For paradoxical subregs, allow case 1 as above. Case 3 isn't
implemented. */
- if (GET_CODE (SUBREG_REG (op0)) == REG)
+ if (REG_P (SUBREG_REG (op0)))
{
op0 = SUBREG_REG (op0);
op1 = gen_lowpart (GET_MODE (op0), op1);
make a new AND in the proper mode. */
if (GET_CODE (op0) == AND
&& !have_insn_for (AND, mode))
- op0 = gen_binary (AND, tmode,
- gen_lowpart (tmode,
- XEXP (op0, 0)),
- gen_lowpart (tmode,
- XEXP (op0, 1)));
+ op0 = simplify_gen_binary (AND, tmode,
+ gen_lowpart (tmode,
+ XEXP (op0, 0)),
+ gen_lowpart (tmode,
+ XEXP (op0, 1)));
op0 = gen_lowpart (tmode, op0);
if (zero_extended && GET_CODE (op1) == CONST_INT)
if (op1 == const0_rtx && (code == LT || code == GE)
&& GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
{
- op0 = gen_binary (AND, tmode,
- gen_lowpart (tmode, op0),
- GEN_INT ((HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (mode) - 1)));
+ op0 = simplify_gen_binary (AND, tmode,
+ gen_lowpart (tmode, op0),
+ GEN_INT ((HOST_WIDE_INT) 1
+ << (GET_MODE_BITSIZE (mode)
+ - 1)));
code = (code == LT) ? NE : EQ;
break;
}
return code;
}
\f
-/* Like jump.c' reversed_comparison_code, but use combine infrastructure for
- searching backward. */
-static enum rtx_code
-combine_reversed_comparison_code (rtx exp)
+/* Utility function for record_value_for_reg. Count number of
+ rtxs in X. */
+static int
+count_rtxs (rtx x)
{
- enum rtx_code code1 = reversed_comparison_code (exp, NULL);
- rtx x;
-
- if (code1 != UNKNOWN
- || GET_MODE_CLASS (GET_MODE (XEXP (exp, 0))) != MODE_CC)
- return code1;
- /* Otherwise try and find where the condition codes were last set and
- use that. */
- x = get_last_value (XEXP (exp, 0));
- if (!x || GET_CODE (x) != COMPARE)
- return UNKNOWN;
- return reversed_comparison_code_parts (GET_CODE (exp),
- XEXP (x, 0), XEXP (x, 1), NULL);
-}
+ enum rtx_code code = GET_CODE (x);
+ const char *fmt;
+ int i, ret = 1;
-/* Return comparison with reversed code of EXP and operands OP0 and OP1.
- Return NULL_RTX in case we fail to do the reversal. */
-static rtx
-reversed_comparison (rtx exp, enum machine_mode mode, rtx op0, rtx op1)
-{
- enum rtx_code reversed_code = combine_reversed_comparison_code (exp);
- if (reversed_code == UNKNOWN)
- return NULL_RTX;
- else
- return gen_binary (reversed_code, mode, op0, op1);
+ if (GET_RTX_CLASS (code) == '2'
+ || GET_RTX_CLASS (code) == 'c')
+ {
+ rtx x0 = XEXP (x, 0);
+ rtx x1 = XEXP (x, 1);
+
+ if (x0 == x1)
+ return 1 + 2 * count_rtxs (x0);
+
+ if ((GET_RTX_CLASS (GET_CODE (x1)) == '2'
+ || GET_RTX_CLASS (GET_CODE (x1)) == 'c')
+ && (x0 == XEXP (x1, 0) || x0 == XEXP (x1, 1)))
+ return 2 + 2 * count_rtxs (x0)
+ + count_rtxs (x == XEXP (x1, 0)
+ ? XEXP (x1, 1) : XEXP (x1, 0));
+
+ if ((GET_RTX_CLASS (GET_CODE (x0)) == '2'
+ || GET_RTX_CLASS (GET_CODE (x0)) == 'c')
+ && (x1 == XEXP (x0, 0) || x1 == XEXP (x0, 1)))
+ return 2 + 2 * count_rtxs (x1)
+ + count_rtxs (x == XEXP (x0, 0)
+ ? XEXP (x0, 1) : XEXP (x0, 0));
+ }
+
+ fmt = GET_RTX_FORMAT (code);
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ if (fmt[i] == 'e')
+ ret += count_rtxs (XEXP (x, i));
+
+ return ret;
}
\f
/* Utility function for following routine. Called when X is part of a value
&& GET_CODE (XEXP (tem, 0)) == CLOBBER
&& GET_CODE (XEXP (tem, 1)) == CLOBBER)
tem = XEXP (tem, 0);
+ else if (count_occurrences (value, reg, 1) >= 2)
+ {
+ /* If there are two or more occurrences of REG in VALUE,
+ prevent the value from growing too much. */
+ if (count_rtxs (tem) > MAX_LAST_VALUE_RTL)
+ tem = gen_rtx_CLOBBER (GET_MODE (tem), const0_rtx);
+ }
value = replace_rtx (copy_rtx (value), reg, tem);
}
if (GET_CODE (dest) == SUBREG)
dest = SUBREG_REG (dest);
- if (GET_CODE (dest) == REG)
+ if (REG_P (dest))
{
/* If we are setting the whole register, we know its value. Otherwise
show that we don't know the value. We can handle SUBREG in
else
record_value_for_reg (dest, record_dead_insn, NULL_RTX);
}
- else if (GET_CODE (dest) == MEM
+ else if (MEM_P (dest)
/* Ignore pushes, they clobber nothing. */
&& ! push_operand (dest, GET_MODE (dest)))
mem_last_set = INSN_CUID (record_dead_insn);
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
{
if (REG_NOTE_KIND (link) == REG_DEAD
- && GET_CODE (XEXP (link, 0)) == REG)
+ && REG_P (XEXP (link, 0)))
{
unsigned int regno = REGNO (XEXP (link, 0));
unsigned int endregno
record_value_for_reg (XEXP (link, 0), insn, NULL_RTX);
}
- if (GET_CODE (insn) == CALL_INSN)
+ if (CALL_P (insn))
{
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
if (TEST_HARD_REG_BIT (regs_invalidated_by_call, i))
insn = XEXP (links, 0);
set = single_set (insn);
- if (! set || GET_CODE (SET_DEST (set)) != REG
+ if (! set || !REG_P (SET_DEST (set))
|| REGNO (SET_DEST (set)) != regno
|| GET_MODE (SET_DEST (set)) != GET_MODE (SUBREG_REG (subreg)))
{
reg_stat[regno].last_set_nonzero_bits &= GET_MODE_MASK (mode);
}
- if (GET_CODE (SET_SRC (set)) == REG)
+ if (REG_P (SET_SRC (set)))
{
regno = REGNO (SET_SRC (set));
links = LOG_LINKS (insn);
check_promoted_subreg (rtx insn, rtx x)
{
if (GET_CODE (x) == SUBREG && SUBREG_PROMOTED_VAR_P (x)
- && GET_CODE (SUBREG_REG (x)) == REG)
+ && REG_P (SUBREG_REG (x)))
record_promoted_value (insn, x);
else
{
int len = GET_RTX_LENGTH (GET_CODE (x));
int i;
- if (GET_CODE (x) == REG)
+ if (REG_P (x))
{
unsigned int regno = REGNO (x);
unsigned int endregno
|| (! (regno >= FIRST_PSEUDO_REGISTER
&& REG_N_SETS (regno) == 1
&& (! REGNO_REG_SET_P
- (ENTRY_BLOCK_PTR->next_bb->global_live_at_start, regno)))
+ (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start,
+ regno)))
&& reg_stat[j].last_set_label > tick))
{
if (replace)
/* If this is a memory reference, make sure that there were
no stores after it that might have clobbered the value. We don't
have alias info, so we assume any store invalidates it. */
- else if (GET_CODE (x) == MEM && ! RTX_UNCHANGING_P (x)
+ else if (MEM_P (x) && !MEM_READONLY_P (x)
&& INSN_CUID (insn) <= mem_last_set)
{
if (replace)
&& (value = get_last_value (SUBREG_REG (x))) != 0)
return gen_lowpart (GET_MODE (x), value);
- if (GET_CODE (x) != REG)
+ if (!REG_P (x))
return 0;
regno = REGNO (x);
&& (regno < FIRST_PSEUDO_REGISTER
|| REG_N_SETS (regno) != 1
|| (REGNO_REG_SET_P
- (ENTRY_BLOCK_PTR->next_bb->global_live_at_start, regno)))))
+ (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start,
+ regno)))))
return 0;
/* If the value was set in a later insn than the ones we are processing,
{
unsigned int regno, endregno;
- if (GET_CODE (dest) != REG)
+ if (!REG_P (dest))
return;
regno = REGNO (dest);
reg_dead_flag = 0;
- /* Check that reg isn't mentioned in NEWPAT_USED_REGS. */
+ /* Check that reg isn't mentioned in NEWPAT_USED_REGS. For fixed registers
+ we allow the machine description to decide whether use-and-clobber
+ patterns are OK. */
if (reg_dead_regno < FIRST_PSEUDO_REGISTER)
{
for (i = reg_dead_regno; i < reg_dead_endregno; i++)
- if (TEST_HARD_REG_BIT (newpat_used_regs, i))
+ if (!fixed_regs[i] && TEST_HARD_REG_BIT (newpat_used_regs, i))
return 0;
}
/* Scan backwards until we find a REG_DEAD note, SET, CLOBBER, label, or
beginning of function. */
- for (; insn && GET_CODE (insn) != CODE_LABEL && GET_CODE (insn) != BARRIER;
+ for (; insn && !LABEL_P (insn) && !BARRIER_P (insn);
insn = prev_nonnote_insn (insn))
{
note_stores (PATTERN (insn), reg_dead_at_p_1, NULL);
}
for (i = reg_dead_regno; i < reg_dead_endregno; i++)
- if (REGNO_REG_SET_P (block->global_live_at_start, i))
+ if (REGNO_REG_SET_P (block->il.rtl->global_live_at_start, i))
return 0;
return 1;
case CLOBBER:
/* If we are clobbering a MEM, mark any hard registers inside the
address as used. */
- if (GET_CODE (XEXP (x, 0)) == MEM)
+ if (MEM_P (XEXP (x, 0)))
mark_used_regs_combine (XEXP (XEXP (x, 0), 0));
return;
while (GET_CODE (testreg) == SUBREG
|| GET_CODE (testreg) == ZERO_EXTRACT
- || GET_CODE (testreg) == SIGN_EXTRACT
|| GET_CODE (testreg) == STRICT_LOW_PART)
testreg = XEXP (testreg, 0);
- if (GET_CODE (testreg) == MEM)
+ if (MEM_P (testreg))
mark_used_regs_combine (XEXP (testreg, 0));
mark_used_regs_combine (SET_SRC (x));
For a REG (the only other possibility), the entire value is
being replaced so the old value is not used in this insn. */
- if (GET_CODE (dest) == MEM)
+ if (MEM_P (dest))
move_deaths (XEXP (dest, 0), maybe_kill_insn, from_cuid,
to_insn, pnotes);
return;
if (GET_CODE (target) == SUBREG)
target = SUBREG_REG (target);
- if (GET_CODE (target) != REG)
+ if (!REG_P (target))
return 0;
tregno = REGNO (target), regno = REGNO (x);
as appropriate. I3 and I2 are the insns resulting from the combination
insns including FROM (I2 may be zero).
+ ELIM_I2 and ELIM_I1 are either zero or registers that we know will
+ not need REG_DEAD notes because they are being substituted for. This
+ saves searching in the most common cases.
+
Each note in the list is either ignored or placed on some insns, depending
on the type of note. */
static void
-distribute_notes (rtx notes, rtx from_insn, rtx i3, rtx i2)
+distribute_notes (rtx notes, rtx from_insn, rtx i3, rtx i2, rtx elim_i2,
+ rtx elim_i1)
{
rtx note, next_note;
rtx tem;
/* If this NOTE references a pseudo register, ensure it references
the latest copy of that register. */
- if (XEXP (note, 0) && GET_CODE (XEXP (note, 0)) == REG
+ if (XEXP (note, 0) && REG_P (XEXP (note, 0))
&& REGNO (XEXP (note, 0)) >= FIRST_PSEUDO_REGISTER)
XEXP (note, 0) = regno_reg_rtx[REGNO (XEXP (note, 0))];
/* Just get rid of this note, as it is unused later anyway. */
break;
- case REG_VTABLE_REF:
- /* ??? Should remain with *a particular* memory load. Given the
- nature of vtable data, the last insn seems relatively safe. */
- place = i3;
- break;
-
case REG_NON_LOCAL_GOTO:
- if (GET_CODE (i3) == JUMP_INSN)
+ if (JUMP_P (i3))
place = i3;
- else if (i2 && GET_CODE (i2) == JUMP_INSN)
- place = i2;
else
- abort ();
+ {
+ gcc_assert (i2 && JUMP_P (i2));
+ place = i2;
+ }
break;
case REG_EH_REGION:
/* These notes must remain with the call or trapping instruction. */
- if (GET_CODE (i3) == CALL_INSN)
+ if (CALL_P (i3))
place = i3;
- else if (i2 && GET_CODE (i2) == CALL_INSN)
+ else if (i2 && CALL_P (i2))
place = i2;
- else if (flag_non_call_exceptions)
+ else
{
+ gcc_assert (flag_non_call_exceptions);
if (may_trap_p (i3))
place = i3;
else if (i2 && may_trap_p (i2))
can now prove that the instructions can't trap. Drop the
note in this case. */
}
- else
- abort ();
break;
- case REG_ALWAYS_RETURN:
case REG_NORETURN:
case REG_SETJMP:
/* These notes must remain with the call. It should not be
possible for both I2 and I3 to be a call. */
- if (GET_CODE (i3) == CALL_INSN)
+ if (CALL_P (i3))
place = i3;
- else if (i2 && GET_CODE (i2) == CALL_INSN)
- place = i2;
else
- abort ();
+ {
+ gcc_assert (i2 && CALL_P (i2));
+ place = i2;
+ }
break;
case REG_UNUSED:
if (from_insn != i3)
break;
- if (! (GET_CODE (XEXP (note, 0)) == REG
+ if (! (REG_P (XEXP (note, 0))
? find_regno_note (i3, REG_UNUSED, REGNO (XEXP (note, 0)))
: find_reg_note (i3, REG_UNUSED, XEXP (note, 0))))
place = i3;
now dies here, so we must put a REG_DEAD note here unless there
is one already. */
else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3))
- && ! (GET_CODE (XEXP (note, 0)) == REG
+ && ! (REG_P (XEXP (note, 0))
? find_regno_note (i3, REG_DEAD,
REGNO (XEXP (note, 0)))
: find_reg_note (i3, REG_DEAD, XEXP (note, 0))))
place = i2;
}
- /* Don't attach REG_LABEL note to a JUMP_INSN which has
- JUMP_LABEL already. Instead, decrement LABEL_NUSES. */
- if (place && GET_CODE (place) == JUMP_INSN && JUMP_LABEL (place))
+ /* Don't attach REG_LABEL note to a JUMP_INSN. Add
+ a JUMP_LABEL instead or decrement LABEL_NUSES. */
+ if (place && JUMP_P (place))
{
- if (JUMP_LABEL (place) != XEXP (note, 0))
- abort ();
- if (GET_CODE (JUMP_LABEL (place)) == CODE_LABEL)
- LABEL_NUSES (JUMP_LABEL (place))--;
+ rtx label = JUMP_LABEL (place);
+
+ if (!label)
+ JUMP_LABEL (place) = XEXP (note, 0);
+ else
+ {
+ gcc_assert (label == XEXP (note, 0));
+ if (LABEL_P (label))
+ LABEL_NUSES (label)--;
+ }
place = 0;
}
- if (place2 && GET_CODE (place2) == JUMP_INSN && JUMP_LABEL (place2))
+ if (place2 && JUMP_P (place2))
{
- if (JUMP_LABEL (place2) != XEXP (note, 0))
- abort ();
- if (GET_CODE (JUMP_LABEL (place2)) == CODE_LABEL)
- LABEL_NUSES (JUMP_LABEL (place2))--;
+ rtx label = JUMP_LABEL (place2);
+
+ if (!label)
+ JUMP_LABEL (place2) = XEXP (note, 0);
+ else
+ {
+ gcc_assert (label == XEXP (note, 0));
+ if (LABEL_P (label))
+ LABEL_NUSES (label)--;
+ }
place2 = 0;
}
break;
/* If the insn previously containing this note still exists,
put it back where it was. Otherwise move it to the previous
insn. Adjust the corresponding REG_LIBCALL note. */
- if (GET_CODE (from_insn) != NOTE)
+ if (!NOTE_P (from_insn))
place = from_insn;
else
{
case REG_LIBCALL:
/* This is handled similarly to REG_RETVAL. */
- if (GET_CODE (from_insn) != NOTE)
+ if (!NOTE_P (from_insn))
place = from_insn;
else
{
use of A and put the death note there. */
if (from_insn
- && GET_CODE (from_insn) == CALL_INSN
+ && CALL_P (from_insn)
&& find_reg_fusage (from_insn, USE, XEXP (note, 0)))
place = from_insn;
else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3)))
&& reg_referenced_p (XEXP (note, 0), PATTERN (i2)))
place = i2;
+ if (place == 0
+ && (rtx_equal_p (XEXP (note, 0), elim_i2)
+ || rtx_equal_p (XEXP (note, 0), elim_i1)))
+ break;
+
if (place == 0)
{
basic_block bb = this_basic_block;
+ /* You might think you could search back from FROM_INSN
+ rather than from I3, but combine tries to split invalid
+ combined instructions. This can result in the old I2
+ or I1 moving later in the insn sequence. */
for (tem = PREV_INSN (i3); place == 0; tem = PREV_INSN (tem))
{
if (! INSN_P (tem))
/* If the register is being set at TEM, see if that is all
TEM is doing. If so, delete TEM. Otherwise, make this
- into a REG_UNUSED note instead. */
- if (reg_set_p (XEXP (note, 0), PATTERN (tem)))
+ into a REG_UNUSED note instead. Don't delete sets to
+ global register vars. */
+ if ((REGNO (XEXP (note, 0)) >= FIRST_PSEUDO_REGISTER
+ || !global_regs[REGNO (XEXP (note, 0))])
+ && reg_set_p (XEXP (note, 0), PATTERN (tem)))
{
rtx set = single_set (tem);
rtx inner_dest = 0;
PATTERN (tem) = pc_rtx;
REG_NOTES (tem) = NULL;
- distribute_notes (old_notes, tem, tem, NULL_RTX);
+ distribute_notes (old_notes, tem, tem, NULL_RTX,
+ NULL_RTX, NULL_RTX);
distribute_links (LOG_LINKS (tem));
- PUT_CODE (tem, NOTE);
- NOTE_LINE_NUMBER (tem) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (tem) = 0;
+ SET_INSN_DELETED (tem);
#ifdef HAVE_cc0
/* Delete the setter too. */
REG_NOTES (cc0_setter) = NULL;
distribute_notes (old_notes, cc0_setter,
- cc0_setter, NULL_RTX);
+ cc0_setter, NULL_RTX,
+ NULL_RTX, NULL_RTX);
distribute_links (LOG_LINKS (cc0_setter));
- PUT_CODE (cc0_setter, NOTE);
- NOTE_LINE_NUMBER (cc0_setter)
- = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (cc0_setter) = 0;
+ SET_INSN_DELETED (cc0_setter);
}
#endif
}
}
}
else if (reg_referenced_p (XEXP (note, 0), PATTERN (tem))
- || (GET_CODE (tem) == CALL_INSN
+ || (CALL_P (tem)
&& find_reg_fusage (tem, USE, XEXP (note, 0))))
{
+ /* This may not be the correct place for the death
+ note if FROM_INSN is before TEM, and the reg is
+ set between FROM_INSN and TEM. The reg might
+ die two or more times. An existing death note
+ means we are looking at the wrong live range. */
+ if (from_insn
+ && INSN_CUID (from_insn) < INSN_CUID (tem)
+ && find_regno_note (tem, REG_DEAD,
+ REGNO (XEXP (note, 0))))
+ {
+ tem = from_insn;
+ if (tem == BB_HEAD (bb))
+ break;
+ continue;
+ }
+
place = tem;
/* If we are doing a 3->2 combination, and we have a
was dead, there's nothing left to do. Otherwise, we'll
need to do a global life update after combine. */
if (REG_NOTE_KIND (note) == REG_DEAD && place == 0
- && REGNO_REG_SET_P (bb->global_live_at_start,
+ && REGNO_REG_SET_P (bb->il.rtl->global_live_at_start,
REGNO (XEXP (note, 0))))
SET_BIT (refresh_blocks, this_basic_block->index);
}
/* If the register is set or already dead at PLACE, we needn't do
anything with this note if it is still a REG_DEAD note.
- We can here if it is set at all, not if is it totally replace,
+ We check here if it is set at all, not if is it totally replaced,
which is what `dead_or_set_p' checks, so also check for it being
set partially. */
= gen_rtx_EXPR_LIST (REG_DEAD, piece, NULL_RTX);
distribute_notes (new_note, place, place,
- NULL_RTX);
+ NULL_RTX, NULL_RTX, NULL_RTX);
}
else if (! refers_to_regno_p (i, i + 1,
PATTERN (place), 0)
default:
/* Any other notes should not be present at this point in the
compilation. */
- abort ();
+ gcc_unreachable ();
}
if (place)
}
else if ((REG_NOTE_KIND (note) == REG_DEAD
|| REG_NOTE_KIND (note) == REG_UNUSED)
- && GET_CODE (XEXP (note, 0)) == REG)
+ && REG_P (XEXP (note, 0)))
REG_N_DEATHS (REGNO (XEXP (note, 0)))--;
if (place2)
{
if ((REG_NOTE_KIND (note) == REG_DEAD
|| REG_NOTE_KIND (note) == REG_UNUSED)
- && GET_CODE (XEXP (note, 0)) == REG)
+ && REG_P (XEXP (note, 0)))
REG_N_DEATHS (REGNO (XEXP (note, 0)))++;
REG_NOTES (place2) = gen_rtx_fmt_ee (GET_CODE (note),
replace I3, I2, and I1 by I3 and I2. But in that case the
destination of I2 also remains unchanged. */
- if (GET_CODE (XEXP (link, 0)) == NOTE
+ if (NOTE_P (XEXP (link, 0))
|| (set = single_set (XEXP (link, 0))) == 0)
continue;
reg = SET_DEST (set);
while (GET_CODE (reg) == SUBREG || GET_CODE (reg) == ZERO_EXTRACT
- || GET_CODE (reg) == SIGN_EXTRACT
|| GET_CODE (reg) == STRICT_LOW_PART)
reg = XEXP (reg, 0);
place = insn;
break;
}
- else if (GET_CODE (insn) == CALL_INSN
+ else if (CALL_P (insn)
&& find_reg_fusage (insn, USE, reg))
{
place = insn;
rtx x = *loc;
if (x != NULL_RTX
- && (GET_CODE (x) == REG || GET_CODE (x) == MEM)
+ && (REG_P (x) || MEM_P (x))
&& ! reg_mentioned_p (x, (rtx) expr))
return 1;
return 0;
insn_cuid (rtx insn)
{
while (insn != 0 && INSN_UID (insn) > max_uid_cuid
- && GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == USE)
+ && NONJUMP_INSN_P (insn) && GET_CODE (PATTERN (insn)) == USE)
insn = NEXT_INSN (insn);
- if (INSN_UID (insn) > max_uid_cuid)
- abort ();
+ gcc_assert (INSN_UID (insn) <= max_uid_cuid);
return INSN_CUID (insn);
}
void
dump_combine_stats (FILE *file)
{
- fnotice
+ fprintf
(file,
";; Combiner statistics: %d attempts, %d substitutions (%d requiring new space),\n;; %d successes.\n\n",
combine_attempts, combine_merges, combine_extras, combine_successes);
void
dump_combine_total_stats (FILE *file)
{
- fnotice
+ fprintf
(file,
"\n;; Combiner totals: %d attempts, %d substitutions (%d requiring new space),\n;; %d successes.\n",
total_attempts, total_merges, total_extras, total_successes);
}
+\f
+
+static bool
+gate_handle_combine (void)
+{
+ return (optimize > 0);
+}
+
+/* Try combining insns through substitution. */
+static void
+rest_of_handle_combine (void)
+{
+ int rebuild_jump_labels_after_combine
+ = combine_instructions (get_insns (), max_reg_num ());
+
+ /* Combining insns may have turned an indirect jump into a
+ direct jump. Rebuild the JUMP_LABEL fields of jumping
+ instructions. */
+ if (rebuild_jump_labels_after_combine)
+ {
+ timevar_push (TV_JUMP);
+ rebuild_jump_labels (get_insns ());
+ timevar_pop (TV_JUMP);
+
+ delete_dead_jumptables ();
+ cleanup_cfg (CLEANUP_EXPENSIVE | CLEANUP_UPDATE_LIFE);
+ }
+}
+
+struct tree_opt_pass pass_combine =
+{
+ "combine", /* name */
+ gate_handle_combine, /* gate */
+ rest_of_handle_combine, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_COMBINE, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_dump_func |
+ TODO_ggc_collect, /* todo_flags_finish */
+ 'c' /* letter */
+};
+