1 1998-09-30 Dave Love <d.love@dl.ac.uk>
3 * Makefile.in (f2cext.c): Depend on g2c.h.
5 1998-09-30 Robert Lipe <robertl@dgii.com>
7 * Makefile.in (all): Correct dependencies do --disable-multilibs
9 (distclean): Correct typo.
11 1998-09-28 Dave Love <d.love@dl.ac.uk>
13 * libI77/open.c: Back out part of last Netlib update affecting
14 scratch files which clashed with the g77 variations and broke
15 implicit endfile on rewind.
17 1998-09-21 Dave Love <d.love@dl.ac.uk>
19 * libI77/Version.c: Update.
21 Mon Sep 21 12:27:27 1998 Robert Lipe <robertl@dgii.com>
23 * Makefile.in (distclean, clean, uninstall, install, all): Add
25 * configure.in: Likewise.
26 * configure: Regenerate.
27 * libF77/Makefile.in, libU77/Makefile.in, libI77/Makefile.in (clean):
28 Explictly remove stamp in parent's directory.
30 1998-09-20 Dave Love <d.love@dl.ac.uk>
32 * libI77/sfe.c (e_wdfe): Set f__init to avoid spurious recursive
33 i/o error from formatted direct i/o.
35 Thu Sep 10 14:57:25 1998 Kamil Iskra <iskra@student.uci.agh.edu.pl>
37 * Makefile.in (install): Add missing "else true;".
39 1998-09-09 Craig Burley <burley@gnu.org>
41 * configure.in: Test $srcdir, not $subdir (probable typo).
42 Clarify commentary, fix a bit of spacing.
44 1998-09-07 Dave Love <d.love@dl.ac.uk>
46 * ChangeLog.egcs: Deleted. Entries merged here.
48 1998-09-07 Dave Love <d.love@dl.ac.uk>
50 * libI77/sfe.c, libI77/dfe.c: Revert last change.
52 1998-09-06 Dave Love <d.love@dl.ac.uk>
54 From Toon to fix spurious recursive i/o errors:
55 * libI77/sfe.c (e_wdfe): Set f__init.
57 * libI77/dfe.c (c_dfe): Check and set f__init.
58 (s_rdfe, s_wdfe): Don't check and set f__init.
60 Fri Sep 4 18:40:32 1998 Craig Burley <burley@gnu.org>
62 * libU77/sys_clock_.c (G77_system_clock_0): Fix indentation.
64 Tue Sep 1 10:06:06 1998 Craig Burley <burley@gnu.org>
66 * libF77/Version.c: Update.
67 * libU77/Version.c: Update.
68 * libI77/Version.c: Update.
70 Wed Aug 26 23:19:40 1998 Jeffrey A Law (law@cygnus.com)
72 * Makefile.in (FLAGS_TO_PASS): Fix typo.
74 1998-08-11 Dave Love <d.love@dl.ac.uk>
76 * README: Update from Craig.
78 1998-07-24 Dave Love <d.love@dl.ac.uk>
80 * Makefile.in (s-libe77, ${srcdir}/configure, g2c.h, Makefile)
81 (config.status, rebuilt): Rely on VPATH, dropping explicit use of
82 $(srcdir) in various places.
84 1998-07-19 Dave Love <d.love@dl.ac.uk>
86 * Makefile.in (all): Depend on s-libe77, not e77.
89 Thu Jul 16 00:58:52 1998 Jeffrey A Law (law@cygnus.com)
91 * libU77/Makefile.in: Missed one config.h.in -> config.hin change.
93 * g2c.hin: Renamed from g2c.h.in.
94 * Makefile.in, configure.in: Changed as needed.
97 * libU77/config.hin: Renamed from libU77/config.h.in.
98 * Makefile.in, configure.in: Changed as needed.
101 Tue Jul 14 21:35:30 1998 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
103 * Makefile.in (all): Invoke $(MAKE) instead of just make.
105 Tue Jul 14 02:16:34 1998 Jeffrey A Law (law@cygnus.com)
107 * Makefile.in: stamp-lib* -> s-lib*.
108 * libU77/Makefile.in: Likewise.
109 * libF77/Makefile.in: Likewise.
110 * libI77/Makefile.in: Likewise.
112 * libU77/Makefile.in (ALL_CFLAGS): Add -I$(F2C_H_DIR).
114 Mon Jul 13 13:31:03 1998 Craig Burley <burley@gnu.org>
116 * libU77/u77-test.f: Double-check ETIME results, just
119 1998-07-10 Dave Love <d.love@dl.ac.uk>
121 * Makefile.in: Re-write build procedure mainly to honour
122 dependencies correctly but also allow making in the build
123 directory by configuring the relevant variables. The lib[FIU]77
124 subdirs do dependency checking of their objects. Stamp files
125 dictate when to run (new) archive targets in subdirs. Some
126 tidying of variables. Supply full set of standard targets.
128 * configure.in: Move much of testing to new configures in
129 subdirs. Tidy up handling of RANLIB etc.
131 * stamp-h.in, libF77/configure.in, libI77/configure.in:
132 * libF77/configure, libI77/configure: New files.
134 * libF77/Makefile.in, libI77/Makefile.in, libU77/Makefile.in:
135 Change in step with libf2c/Makefile.in.
137 1998-07-09 Dave Love <d.love@dl.ac.uk>
139 * libU77/Makefile.in (check): Wrap -lg2c ... -lm around $(LIBS) in
142 * libU77/Version.c, libI77/Version.c: Update version info.
144 * libU77/sys_clock_.c: Replace TIMES conditional stuff removed in
145 error by last change.
147 1998-07-06 Mike Stump <mrs@wrs.com>
149 * Makefile.in (clean): Don't remove Makefiles, that is done in
152 1998-07-06 Dave Love <d.love@dl.ac.uk>
154 * libU77/Makefile.in (lib): Change variable lib to LIBS.
156 1998-07-06 Robert Lipe <robertl@dgii.com>
158 * libU77/configure.in: Look for -lsocket, add to LIBS if found.
160 * libU77/Makefile.in (lib): Use LIBS from above.
162 1998-07-05 Dave Love <d.love@dl.ac.uk>
164 * f2cext.c (system_clock_): Remove (just f90 intrinsic).
166 * Makefile.in (F2CEXT): Remove sclock.
167 (UOBJ): Add libU77/datetime_.o.
169 * libU77/config.h.in: Add HAVE_GETTIMEOFDAY.
171 * libU77/configure.in: Check for gettimeofday.
173 * libU77/datetime_.c: New file.
175 * libU77/sys_clock_.c: Allow optional args.
177 * libU77/Makefile.in (G77DIR): Fix for current directory
179 (SRCS, OBJS): Add datetime.
181 * libU77/u77-test.f: Call date_and_time. Call system_clock
184 1998-06-29 Dave Love <d.love@dl.ac.uk>
186 * libI77/wsfe.c (s_wsfe): Fix setting of f__curunit lost in
188 * libI77/rsfe.c (s_rsfe): Likewise.
190 Sat Jun 27 23:04:49 1998 Jeffrey A Law (law@cygnus.com)
192 * Makefile.in (FLAGS_TO_PASS, case G2C_H_DIR): Use $(TARGET_SUBDIR)
193 instead of hardcoding "libraries".
195 1998-06-26 Manfred Hollstein <manfred@s-direktnet.de>
197 * Makefile.in (gcc_version_trigger): Add new macro.
198 (config.status): Add dependency upon $(gcc_version_trigger).
200 * configure.in (gcc_version_trigger): New variable; initialize
201 using value from toplevel configure; add AC_SUBST for it.
202 (gcc_version): Change initialization to use this new variable.
203 * configure: Regenerate.
205 1998-06-24 Manfred Hollstein <manfred@s-direktnet.de>
207 * Makefile.in (version): Rename to gcc_version.
208 * configure.in (version): Likewise.
209 (gcc_version): Add code to use an option passed from parent configure.
210 * configure: Regenerate.
212 1998-06-23 Dave Love <d.love@dl.ac.uk>
214 * libI77/backspace.c, libI77/dfe.c, libI77/due.c, libI77/iio.c:
215 * libI77/lread.c, libI77/sfe.c, libI77/sue.c, libI77/wsfe.c: Update
216 to Netlib version of 1998-06-18.
218 1998-06-21 Dave Love <d.love@dl.ac.uk>
220 * configure.in (version, target_alias): Define.
222 * Makefile.in (version, target_alias, libsubdir): Define.
223 (install): Remove check for libsubdir.
225 Sat Jun 13 03:46:40 1998 Craig Burley <burley@gnu.org>
227 * Makefile.in (install): Don't install if $(libsubdir)
228 is empty; issue a diagnostic saying top-level Makefile
229 must pass it in instead, and exit.
231 * Makefile.in (g2c.h): Rename from f2c.h.
233 * Makefile.in, libF77/Makefile.in, libI77/Makefile.in:
234 * libU77/Makefile.in: Rewrite config and var assignment
235 sections to be even more minimal than before, and to
236 more clearly documented what macros are expected to be
237 set and to what sorts of values. Eliminate CROSS and
238 related stuff, since there's no such things as CROSS
239 in egcs. Rename GCC_FOR_TARGET to CC throughout.
240 * Makefile.in (stamp-libi77, stamp-libf77, stamp-libu77):
242 * configure.in: Eliminate CROSS.
244 Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
245 normalize and simplify g77/libg2c build process:
246 * Makefile.in: Remove all stuff pertaining to
247 installation, cleaning, and so on. Parent Makefile
248 does all that now. Pass F2C_H_DIR,
249 G2C_H_DIR, and GCC_H_DIR, the pathnames for the
250 directories containing f2c.h, g2c.h, and other
251 #include files, to subdirectory Makefiles.
252 (stamp-libf77, stamp-libi77, stamp-libu77):
253 Don't specify `-f Makefile' anymore, it's not needed
254 now that subdirectory makefile's from netlib are
255 renamed to makefile.netlib in g77 source (and to
256 makefile.ori by configuration process, in case they're
257 still around somehow).
258 (stamp-libe77): Don't make libE77 dir unless it doesn't
259 exist, if it does just delete all objects in it.
260 Compile using $(GCC_FOR_TARGET), not $(CC).
261 (rebuilt): Remove this and all subordinate targets,
262 as parent Makefile now handles all that.
264 * configure.in (Pad_UDread, ALWAYS_FLUSH, WANT_LEAD_0):
265 Remove these and commentary to new f2c.h file.
266 AC_OUTPUT g2c.h instead of f2c.h. Remove old commentary
267 regarding concatenation.
268 * g2c.h.in: Rename from f2c.h.in, add appropriate
270 * f2c.h: New file, a wrapper for g2c.h that does
271 libg2c-specific stuff.
272 * libF77/Makefile.in, libI77/Makefile.in, libU77/Makefile.in:
273 Change $(ALL_CFLAGS) to use F2C_H_DIR, G2C_H_DIR, and GCC_H_DIR
274 macros. Remove F2C_H macro, replace use with explicit
275 dependencies on f2c.h and g2c.h.
278 Mon Apr 27 22:52:31 1998 Richard Henderson <rth@cygnus.com>
280 * libU77/ltime_.c: Bounce the ftnint argument through a local time_t.
281 * libU77/gmtime_.c: Likewise.
283 Sun Apr 26 18:07:56 1998 Richard Henderson <rth@cygnus.com>
285 * configure.in: Adjust include paths in F2C_INTEGER and F2C_LONGINT
286 tests to work out of the build directory.
288 1998-05-20 Dave Love <d.love@dl.ac.uk>
290 * Makefile.in ($(lib)): Use shell loop instead of unportable
291 make variable substitution.
293 Tue May 19 12:50:27 1998 Craig Burley <burley@gnu.org>
295 Break up main() into separate .o's so making and
296 linking against shared libraries with non-Fortran
297 main() routines is easier:
298 * Makefile.in (MISC): Add setarg.o and setsig.o.
299 * libF77/Makefile.in (MISC): Ditto.
300 * libF77/setarg.c: New file, contains f_setarg().
301 * libF77/setsig.c: New file, contains f_setsig().
302 * libF77/getarg_.c: Rename xarg* to f__xarg*.
303 * libF77/iargc_.c: Ditto
305 Sat May 2 16:44:46 1998 Craig Burley <burley@gnu.org>
307 * libF77/signal_.c, libI77/dfe.c, libI77/due.c,
308 libI77/wsfe.c: Tweaks to eliminate unnecessary
309 differences vs. netlib libf2c.
311 Fri May 1 11:57:45 1998 Craig Burley <burley@gnu.org>
313 Update to Netlib version of 1998-04-20:
314 * libF77/dtime_.c, libF77/etime_.c, libF77/h_dnnt.c,
315 libF77/h_nint.c, libF77/i_dnnt.c, libF77/i_nint.c,
316 libF77/main.c, libF77/s_paus.c, libF77/signal1.h0,
317 libI77/backspace.c, libI77/close.c, libI77/dfe.c,
318 libI77/endfile.c, libI77/err.c, libI77/fio.h,
319 libI77/iio.c, libI77/ilnw.c, libI77/lread.c,
320 libI77/lwrite.c, libI77/open.c, libI77/rawio.h,
321 libI77/sfe.c, libI77/util.c, libI77/wrtfmt.c,
322 libI77/wsfe.c, libI77/wsle.c, libI77/wsne.c:
323 See changes.netlib for info.
325 Sun Apr 26 09:13:41 1998 Craig Burley <burley@gnu.org>
327 * libU77/hostnm_.c (G77_hostnm_0): Fix off-by-one error
328 that was trashing the byte just beyond the CHARACTER*(*)
331 Wed Mar 4 16:32:46 1998 Craig Burley <burley@gnu.org>
333 * libU77/u77-test.f: Don't bother declaring etime.
334 Use `implicit none' and declare mask and lenstr.
335 Do ETIME/DTIME consistency check before loop, then
336 use loop to verify that dtime "ticks" at some point.
337 Check ETIME array-sum using single-precision add, to
338 avoid spurious complaint on systems (like x86) that
339 use more precision for intermediate results.
340 Fix `Results of ETIME and DTIME...' message to print
341 pertinent values (r1 and r2 instead of i and j).
342 Change loop from 10M to 1K repeated up to 1000 times
343 or until dtime "ticks".
344 Print the number of 1K loops needed to see this tick.
345 Answer a commented question.
346 Split up a long line of output and do other prettying.
347 Preset lognam in case GETLOG fails to overwrite it.
349 Sat Feb 28 15:32:15 1998 Craig Burley <burley@gnu.org>
351 * libI77/open.c (f_open): Use sizeof(buf) instead of
352 256, for the usual reasons.
354 1998-02-17 Dave Love <d.love@dl.ac.uk>
356 * libU77/u77-test.f: Tweak some o/p.
358 * libU77/Makefile.in (check): Use -L for new directory structure.
360 * Makefile.in (check): Run the u77 check.
361 (config.status, Makefile): New targets.
363 Wed Feb 11 01:46:20 1998 Manfred Hollstein <manfred@s-direktnet.de>
365 * Makefile.in ($(lib)): Call $(AR) repeatedly to avoid overflowing
366 argument size limit on ancious System V.
368 Sun Feb 8 00:32:17 1998 Manfred Hollstein <manfred@s-direktnet.de>
370 * Makefile.in: Add `info install-info clean-info check dvi' targets.
372 Mon Feb 2 11:08:49 1998 Richard Henderson <rth@cygnus.com>
374 * configure.in: Update F2C_INTEGER and F2C_LONGINT tests
375 for the new placement in the hierarchy.
377 Sun Feb 1 02:36:33 1998 Richard Henderson <rth@cygnus.com>
379 * Previous contents of gcc/f/runtime moved into toplevel
382 Sun Feb 1 01:42:47 1998 Mumit Khan <khan@xraylith.wisc.edu>
384 * libU77/configure.in (getlogin,getgid,getuid, kill,link,ttyname):
386 * libU77/config.h.in (HAVE_GETLOGIN, HAVE_GETGID, HAVE_GETUID,
387 HAVE_KILL, HAVE_LINK, HAVE_TTYNAME): New defs.
388 * libU77/getlog_.c: Conditionalize for target platform. Set errno
389 to ENOSYS if target libc doesn't have the function.
390 * libU77/getgid_.c: Likewise.
391 * libU77/getuid_.c: Likewise.
392 * libU77/kill_.c: Likewise.
393 * libU77/link_.c: Likewise.
394 * libU77/ttynam_.c: Likewise.
396 Sun Jan 18 20:01:37 1998 Toon Moene <toon@moene.indiv.nluug.nl>
398 * libI77/backspace.c: (f_back): Use type `uiolen' to determine size
399 of record length specifier.
401 Sat Jan 17 22:40:31 1998 Mumit Khan <khan@xraylith.wisc.edu>
403 * libU77/configure.in (sys/param.h,sys/times.h): Check.
404 (times,alarm): Likewise.
405 * libU77/config.h.in (HAVE_SYS_PARAM_H, HAVE_SYS_TIMES_H)
406 (HAVE_ALARM, HAVE_TIMES): New defs.
407 * libU77/alarm_.c: Conditionalize for target platform. Set errno
408 to ENOSYS if target libc doesn't have the function.
409 * libU77/dtime_.c: Likewise.
410 * libU77/etime_.c: Likewise.
411 * libU77/sys_clock_.c: Likewise.
413 * configure.in (NON_UNIX_STDIO): Define if MINGW32.
414 (NON_ANSI_RW_MODE): Do not define for CYGWIN32 or MINGW32.
416 * libI77/rawio.h: Don't providing conflicting declarations for
417 read() and write(). MINGW32 header files use "const" quals.
419 * libF77/s_paus.c: _WIN32 does not have pause().
421 Mon Apr 27 22:52:31 1998 Richard Henderson <rth@cygnus.com>
423 * libU77/ltime_.c: Bounce the ftnint argument through a local time_t.
424 * libU77/gmtime_.c: Likewise.
426 Sun Apr 26 18:07:56 1998 Richard Henderson <rth@cygnus.com>
428 * configure.in: Adjust include paths in F2C_INTEGER and F2C_LONGINT
429 tests to work out of the build directory.
431 Tue Dec 23 22:56:01 1997 Craig Burley <burley@gnu.org>
433 * libF77/signal_.c (G77_signal_0): Return type is
434 now `void *', to cope with returning previous signal
435 handler on 64-bit systems like Alphas.
436 * f2cext.c (signal_): Changed accordingly.
438 Tue Nov 18 09:49:04 1997 Mumit Khan (khan@xraylith.wisc.edu)
440 * libI77/close.c (f_exit): Reset f__init so that f_clos does not
441 (incorrectly) think there is an I/O recursion when program is
444 Sat Nov 1 18:03:42 1997 Jeffrey A Law (law@cygnus.com)
446 * libF77/signal_.c: Undo last change until we can fix it right.
448 Wed Oct 29 01:01:04 1997 Mumit Khan <khan@brahma.xraylith.wisc.edu>
450 * configure.in: Set CC to CC_FOR_TARGET when cross-compiling.
452 Fri Oct 24 11:15:22 1997 Mumit Khan <khan@brahma.xraylith.wisc.edu>
454 * libI77/close.c (f_exit): Reset f__init so that f_clos does not
455 (incorrectly) think there is an I/O recursion when program is
458 Wed Oct 15 10:06:29 1997 Richard Henderson <rth@cygnus.com>
460 * libF77/signal_.c (G77_signal_0): Make return type sig_pf as well.
461 * libI77/fio.h: Include <string.h> if STDC_HEADERS.
462 * libU77/chmod_.c: Likewise.
464 Tue Oct 7 18:22:10 1997 Richard Henderson <rth@cygnus.com>
466 * Makefile.in (CGFLAGS): Don't force -g0.
467 * libF77/Makefile.in, libI77/Makefile.in, libU77/Makefile.in: Likewise.
469 Mon Oct 6 14:16:46 1997 Jeffrey A Law (law@cygnus.com)
471 * Makefile.in (distclean): Do a better job at cleaning up.
473 1997-10-03 Dave Love <d.love@dl.ac.uk>
475 * configure.in: Check for tempnam (best because it obeys TMPDIR).
476 * libI77/open.c: Use it.
477 * libI77/err.c: New message # 132.
479 Wed Oct 1 01:46:16 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
481 * libU77/sys_clock_.c: File renamed from system_clock_.c.
482 * libU77/Makefile.in, Makefile.in : Reference sys_clock_.*, not
484 * libU77/dtime_.c (clk_tck): Try also HZ macro.
485 * libU77/access.c (G77_access_0): Check malloc return value against 0,
487 * libU77/getlog_.c, libU77/ttynam_.c, libU77/chdir_.c: Ditto.
488 * libU77/chmod_.c, libU77/rename_.c: Ditto.
490 Tue Sep 30 00:41:39 1997 Craig Burley <burley@gnu.ai.mit.edu>
492 Do a better job of printing the offending FORMAT string
493 when producing a diagnostic:
494 * libI77/err.c (f__fmtlen): New variable to hold operating
495 length of format string.
496 (f__fatal): Use new variable to limit length of printed string.
497 * libI77/fmt.c (f_s): Don't skip spaces after closing paren,
498 so nicer message results (and nested case already skips them).
499 (pars_f): Record operating length of format string as indicated
500 by a successful call to f_s, or ad-hoc-calculate it if failure,
501 limiting the length to 80 characters (and stopping at NUL).
502 (do_fio): Use new variable to limit length of printed string.
503 * libI77/fmt.h (f__fmtlen): Declare new variable.
504 * libI77/lread.c (c_le): Set new variable to known length.
506 Mon Sep 29 16:30:31 1997 Craig Burley <burley@gnu.ai.mit.edu>
508 Update to Netlib version of 1997-09-23:
509 * libF77/dtime_.c (dtime_), libF77/etime_.c (dtime_):
510 Return `double' instead of `float' (these are not used
511 in g77's version of libf2c).
512 * libI77/fmt.c, libI77/fmt.h, libI77/rdfmt.c, libI77/wrtfmt.c:
513 Support machines with 64-bit pointers and 32-bit ints (e.g.
516 1997-09-19 Dave Love <d.love@dl.ac.uk>
518 * libU77/dtime_.c (G77_dtime_0): Fix types in HAVE_GETRUSAGE case
519 so as not to truncate results to integer values.
520 * libU77/Version.c: Bump.
522 Thu Sep 18 16:58:46 1997 Jeffrey A Law (law@cygnus.com)
524 * Makefile.in (stamp-lib): Don't use '$?', explicitly
525 list the variables containing the object files to include
528 Tue Sep 9 00:33:24 1997 Craig Burley <burley@gnu.ai.mit.edu>
530 * Version 0.5.21 released.
532 Mon Sep 8 19:39:01 1997 Craig Burley <burley@gnu.ai.mit.edu>
534 * libI77/close.c (f_exit): Fix thinko, inverted test
535 of whether initialization done, so exiting now closes
538 Fri Sep 5 00:18:17 1997 Jeffrey A Law (law@cygnus.com)
540 * Makefile.in (clean): Don't remove config.cache.
541 (distclean): Do it here instead.
543 Tue Aug 26 20:14:08 1997 Robert Lipe (robertl@dgii.com)
545 * hostnm_.c: Include errno.h
547 Tue Aug 26 01:42:21 1997 Craig Burley <burley@gnu.ai.mit.edu>
550 * configure.in: Make sure RANLIB_TEST is set also.
552 From Robert Lipe <robertl@dgii.com>:
553 * libU77/getcwd_.c, libU77/hostnm_.c, libU77/lstat_.c:
554 Also #include <errno.h>, to define ENOSYS.
556 Tue Aug 26 01:25:58 1997 Craig Burley <burley@gnu.ai.mit.edu>
558 * Makefile.in (stamp-lib): Put all f2cext.c objects in
559 a temp directory named libE77, then `ar' them all at
560 once into libf2c.a, to get the job done a bit faster.
561 Still remove the objects (and libE77 directory) afterward.
563 Mon Aug 25 23:26:05 1997 H.J. Lu (hjl@gnu.ai.mit.edu)
565 * Makefile.in (mostlyclean, clean): Check if Makefile exists
566 before using it. Remove stamp-*.
567 (stamp-libi77, stamp-libf77, stamp-libu77): New.
568 (stamp-lib): Only depend on stamp-libi77 stamp-libf77
571 Sun Aug 24 05:04:35 1997 Craig Burley <burley@gnu.ai.mit.edu>
573 * libU77/rand_.c (G77_rand_0), libU77/dtime_.c (G77_dtime_0),
574 libU77/etime_.c (G77_etime_0), libU77/secnds_.c (G77_secnds_0),
575 libU77/second_.c (G77_second_0): Really return `double', not
576 `doublereal', since the result is cast to `float'.
577 * f2cext.c: (rand_, dtime_, etime_, secnds_, second_): Ditto.
578 (erf_, erfc_, besj0_, besj1_, besjn_, besy0_, besy1_,
579 besyn_, dbesj0_, dbesj1_, dbesjn_, dbesy0_, dbesy1_,
580 dbesyn_): All of these return `double', not `doublereal',
581 as they either have `float' or `double' results.
582 * libU77/bes.c (besj0_, besj1_, besjn_, besy0_, besy1_,
584 * libU77/dbes.c (dbesj0_, dbesj1_, dbesjn_, dbesy0_, dbesy1_,
587 Update to Netlib version of 1997-08-16:
588 * libI77/iio.c: Fix bug in internal writes to an array
589 of character strings.
591 * Makefile.in (UOBJ): Restore fixes made by Dan Pettet I
592 lost, which included the addition of mclock_.o already noted
593 below, plus adding symlnk_.o.
595 Thu Aug 21 03:58:34 1997 Craig Burley <burley@gnu.ai.mit.edu>
597 * Makefile.in (UOBJ): Add mclock_.o, thanks to Mumit Khan!
599 1997-08-21 Dave Love <d.love@dl.ac.uk>
601 * libU77/alarm_.c: Fix return type: `integer'.
603 Mon Aug 11 20:12:42 1997 Craig Burley <burley@gnu.ai.mit.edu>
605 * Makefile.in ($(lib), stamp-lib): Ensure that library
606 gets fully updated even if updating was aborted earlier.
608 * libU77/hostnm_.c (G77_hostnm_0): Return ENOSYS and stuff
609 in errno if system has no gethostname() function.
611 * libU77/lstat_.c (G77_lstat_0): Return ENOSYS and stuff
612 in errno if system has no lstat() function.
614 * libU77/getcwd_.c (G77_getcwd_0): Return ENOSYS and stuff
615 in errno if system has no getcwd() or getwd() function.
616 Test HAVE_GETCWD properly.
618 * libU77/symlnk_.c (G77_symlink_0): Return ENOSYS and stuff
619 in errno if system has no symlink() function.
621 * libU77/mclock_.c (G77_mclock_0): Return -1 if system
622 has no clock() function.
624 Mon Aug 11 01:55:36 1997 Craig Burley <burley@gnu.ai.mit.edu>
626 * Makefile.in (F2CEXT): Add `alarm' to this list.
628 * f2cext.c (alarm_): Fix some typos in this function.
629 Delete third `status' argument.
631 * libU77/alarm_.c: Delete third `status' argument,
632 as caller gets this from function result; return
633 status value as function result for caller.
635 * configure.in: Rename `ac_cv_struct_FILE' to
636 `g77_cv_struct_FILE' according to 1997-06-26 change.
638 1997-08-06 Dave Love <d.love@dl.ac.uk>
640 * libU77/vxtidate_.c: Correct day/month argument order.
641 * f2cext.c: Likewise.
643 1997-07-07 Dave Love <d.love@dl.ac.uk>
645 * f2cext.c: Add alarm_.
647 * Makefile.in, libU77/Makefile.in: Add alarm_.
649 * libU77/alarm_.c: New file.
651 1997-06-26 Dave Love <d.love@dl.ac.uk>
653 * configure.in: Generally use prefix `g77_' for cached values
654 we've invented, not `ac_'.
656 Tue Jun 24 18:50:06 1997 Craig Burley <burley@gnu.ai.mit.edu>
658 * libI77/ilnw.c (s_wsni): Call f_init() here.
660 (e_wsli): Turn off "doing I/O" flag here.
662 1997-06-20 Dave Love <d.love@dl.ac.uk>
664 * runtime/configure.in: Check for cygwin32 after Mumit Khan (but
665 differently); if cygwin32 define NON_UNIX_STDIO and don't define
668 Tue Jun 01 06:26:29 1997 Craig Burley <burley@gnu.ai.mit.edu>
670 * libI77/rsne.c (nl_init): Don't call f_init() here,
671 since s_rsne() already does.
672 (c_lir): Call f_init() here instead.
673 * libI77/rsli.c (e_rsli): Turn off "doing I/O" flag here.
674 * libI77/sue.c (e_rsue): Ditto.
676 Sun Jun 22 23:27:22 1997 Craig Burley <burley@gnu.ai.mit.edu>
678 * libI77/fio.h (err): Mark I/O as no longer in progress
679 before returning a non-zero error indicator (since
680 that tells the caller to jump over the remaining I/O
681 calls, including the corresponding `e_whatever' call).
682 * libI77/err.c (endif): Ditto.
683 * libI77/sfe.c (e_wsfe): Ditto.
684 * libI77/lread.c (ERR): Ditto.
685 * libI77/lread.c (l_read): Ditto by having quad case
686 use ERR, not return, to return non-zero error code.
688 Sat Jun 21 12:31:28 1997 Craig Burley <burley@gnu.ai.mit.edu>
690 * libI77/open.c (fk_open): Temporarily turn off
691 "doing I/O" flag during f_open() call to avoid recursive
694 Tue Jun 17 22:40:47 1997 Craig Burley <burley@gnu.ai.mit.edu>
696 * err.c, close.c, rewind.c, inquire.c, backspace.c, endfile.c,
697 iio.c, open.c, Version.c, sfe.c, wsle.c, rsne.c, sue.c, rsfe.c,
698 lread.c, wsfe.c, fio.h, due.c, dfe.c: Change f__init from
699 `flag' to `int' and to signal not just whether initialization
700 has happened (bit 0), but also whether I/O is in progress
701 already (bit 1). Consistently produce a clear diagnostic
702 in cases of recursive I/O. Avoid infinite recursion in
703 f__fatal, in case sig_die triggers another error. Don't
704 output info on internals if not initialized in f__fatal. Don't
705 bother closing units in f_exit if initialization hasn't
708 Tue Jun 10 12:57:44 1997 Craig Burley <burley@gnu.ai.mit.edu>
710 Update to Netlib version of 1997-06-09:
711 * libI77/err.c, libI77/lread.c, libI77/rdfmt.c,
712 libI77/wref.c: Move some #include's around.
714 Mon Jun 9 18:11:56 1997 Craig Burley <burley@gnu.ai.mit.edu>
716 * libU77/kill_.c (kill_): KR_headers version needed
717 `*' in front of args in decls.
719 Sun May 25 03:16:53 1997 Craig Burley <burley@gnu.ai.mit.edu>
721 Update to Netlib version of 1997-05-24:
722 * libF77/README, libF77/Version.c, libF77/main.c,
723 libF77/makefile, libF77/s_paus.c, libF77/signal1.h,
724 libF77/signal_.c, libF77/z_div.c, libI77/Notice,
725 libI77/README, libI77/Version.c, libI77/dfe.c,
726 libI77/err.c, libI77/fmt.c, libI77/makefile,
727 libI77/rawio.h: Apply many, but not all, of the changes
728 made to libf2c since last update.
729 * libF77/Makefile.in (MISC), Makefile.in (MISC): Rename
730 exit.o to exit_.o to go along with Netlib.
731 * libF77/signal.c: Make the prologue much simpler than
734 Sun May 18 20:56:02 1997 Craig Burley <burley@gnu.ai.mit.edu>
736 * libU77/unlink_.c, libU77/stat_.c, libU77/symlnk_.c,
737 libU77/chmod_.c: g_char first arg is const.
739 * libU77/chmod_.c: s_cat expects ftnlen[], not int[] or
740 integer[], change types of array and variables
743 May 7 1997 Daniel Pettet <dan.pettet@bchydro.bc.ca>
745 * libU77/dbes_.c: Commented out the code in the
746 same way the bes* routines are commented out. This
747 was done because corresponding C routines are referenced
748 directly in com-rt.def.
750 Mon May 5 13:56:02 1997 Craig Burley <burley@gnu.ai.mit.edu>
752 * libU77/stat_.c: Reverse KR/ANSI decls of g_char().
754 Apr 18 1997 Daniel Pettet <dan.pettet@bchydro.bc.ca>
756 * libF77/F77_aloc.c, libF77/abort_.c, libF77/derf_.c,
757 libF77/derfc_.c, libF77/ef1asc_.c, libF77/ef1cmc_.c,
758 libF77/erf_.c, libF77/erfc_.c, libF77/exit.c,
759 libF77/getarg_.c, libF77/getenv_.c, libF77/iargc_.c,
760 libF77/s_cat.c, libF77/signal_.c, libF77/system_.c,
761 libI77/close.c, libI77/ftell_.c, libU77/access_.c,
762 libU77/bes.c, libU77/chdir_.c, libU77/chmod_.c, libU77/ctime_.c,
763 libU77/date_.c, libU77/dbes.c, libU77/dtime_.c, libU77/etime_.c,
764 libU77/fdate_.c, libU77/fgetc_.c, libU77/flush1_.c,
765 libU77/fnum_.c, libU77/fputc_.c, libU77/fstat_.c,
766 libU77/gerror_.c, libU77/getcwd_.c, libU77/getgid_.c,
767 libU77/getlog_.c, libU77/getpid_.c, libU77/getuid_.c,
768 libU77/gmtime_.c, libU77/hostnm_.c, libU77/idate_.c,
769 libU77/ierrno_.c, libU77/irand_.c, libU77/isatty_.c,
770 libU77/itime_.c, libU77/kill_.c, libU77/link_.c,
771 libU77/lnblnk_.c, libU77/ltime_.c, libU77/mclock_.c,
772 libU77/perror_.c, libU77/rand_.c, libU77/rename_.c,
773 libU77/secnds_.c, libU77/second_.c, libU77/sleep_.c,
774 libU77/srand_.c, libU77/stat_.c, libU77/symlnk_.c,
775 libU77/system_clock_.c, libU77/time_.c, libU77/ttynam_.c,
776 libU77/umask_.c, libU77/unlink_.c, libU77/vxtidate_.c,
777 libU77/vxttime_.c: Completed renaming routines that are directly
778 callable from g77 to internal names of the form
779 G77_xxxx_0 that are known as intrinsics by g77.
781 Apr 8 1997 Daniel Pettet <dan.pettet@bchydro.bc.ca>
783 * Makefile.in: Add libU77/mclock_.o and libU77/symlnk_.o to UOBJ.
784 * libU77/Makefile.in: Add mclock_.c to SRCS.
785 Add mclock_.o and symlnk_.o to OBJS.
786 Add mclock_.o dependency.
788 Apr 8 1997 Daniel Pettet <dan.pettet@bchydro.bc.ca>
790 * libU77/symlnk_.c: Added a couple of (char*) casts to malloc
791 to silence the compiler.
793 1997-03-17 Dave Love <d.love@dl.ac.uk>
795 * libU77/access_.c, libU77/chdir_.c, libU77/chmod_.c,
796 libU77/link_.c, libU77/lstat_.c, libU77/rename_.c, libU77/stat_.c,
797 libU77/symlnk_.c, libU77/u77-test.f, libU77/unlink_.c: Strip
798 trailing blanks from file names for consistency with other
799 implementations (notably Sun's).
801 * libU77/chmod_.c: Quote the file name given to the shell.
803 Mon Mar 10 00:19:17 1997 Craig Burley <burley@gnu.ai.mit.edu>
805 * libI77/uio.c (do_ud) [PAD_UDread]: Add semicolon to err()
806 invocation when macro not defined (from Mumit Khan
807 <khan@xraylith.wisc.edu>).
809 Fri Feb 28 13:16:50 1997 Craig Burley <burley@gnu.ai.mit.edu>
811 * Version 0.5.20 released.
813 Wed Feb 26 20:28:53 1997 Craig Burley <burley@gnu.ai.mit.edu>
815 * Makefile.in: $(MAKE) invocations now explicitly
816 specify `-f Makefile', just in case the `makefile's
817 from the netlib distribution would get used instead.
819 Mon Feb 24 16:43:39 1997 Craig Burley <burley@gnu.ai.mit.edu>
821 * libU77/Makefile.in (check): Specify driver, and
822 don't bother enabling already-enabled intrinsic groups.
823 Also, get the $(srcdir) version of u77-test.f.
825 Sat Feb 22 14:08:42 1997 Craig Burley <burley@gnu.ai.mit.edu>
827 * libU77/u77-test.f: Explicitly declare intrinsics, get
828 rid of useless CHARACTER declarations on intrinsics (maybe
829 someday appropriate to implement meaning of that in g77
831 Add spin loop just to fatten up the timings a bit.
832 Clarify ETIME output as having three fields.
833 Call TIME with CHARACTER*8, not CHARACTER*6, argument.
834 Call new SECOND intrinsic subroutine, after calling
835 new DUMDUM subroutine just to ensure the correct value
836 doesn't get left around in a register or something.
838 Thu Feb 20 15:22:42 1997 Craig Burley <burley@gnu.ai.mit.edu>
840 * libU77/bes.c: Comment out all the code, as g77 avoids actually
841 calling it, going directly to the system's library instead.
843 Mon Feb 17 02:27:41 1997 Craig Burley <burley@gnu.ai.mit.edu>
845 * libU77/fgetc_.c (fgetc_): Allow return value to be
846 CHARACTER*(*), properly handle CHARACTER*0 and blank-pad
847 CHARACTER*n where n>1.
849 Tue Feb 11 14:12:19 1997 Craig Burley <burley@gnu.ai.mit.edu>
851 * Makefile.in: Clarify role of $(srcdir) here. Fix
852 various targets accordingly. Don't rely at all on
853 gcc/f/include/ being a link to gcc/include/ -- just
855 (${srcdir}/configure, ${srcdir}/libU77/configure):
856 Remove the config.cache files in build directory before
857 cd'ing to source directory as well.
859 * libF77/Makefile.in, libI77/Makefile.in (ALL_CFLAGS):
860 Include `-I.' to pick up build directory.
861 Use gcc/include/ directly.
862 * libU77/Makefile.in (ALL_CFLAGS): Include `-I$(srcdir)'
863 to pick up source directory.
864 (OBJS): Fix typo in `chmod_.o' (was `chmod.o').
866 Mon Feb 10 12:54:47 1997 Craig Burley <burley@gnu.ai.mit.edu>
868 * Makefile.in (UOBJ), libU77/Makefile.in (OBJS): Add
869 libU77/chmod_.o to list of objects.
870 * libU77/chmod_.c: Fix up headers.
871 Fix implementation to not prematurely truncate command
872 string and make room for trailing null.
874 * libU77/ctime_.c: Incoming xstime argument is now longint.
875 * libU77/mclock_.c: Now returns longint.
876 * libU77/time_.c: Now returns longint.
878 1997-02-10 Dave Love <d.love@dl.ac.uk>
880 * etime_.c, dtime_.c: Typo rounded times to seconds.
882 * date_.c: Add missing return.
884 * hostnm_.c: #include unistd.h.
886 Sat Feb 8 03:30:19 1997 Craig Burley <burley@gnu.ai.mit.edu>
888 INTEGER*8 support built in to f2c.h and libf2c (since
889 gcc will be used to compile relevant code anyway):
890 * Makefile.in, libF77/Makefile.in: Add pow_qq.o,
891 qbitbits.o, and qbitshft.o to $POW and $F90BIT macros,
893 * f2c.h.in: Define appropriate types and macros.
894 Place #error directive correctly.
895 * configure.in: Determine appropriate types for long
896 integer (F2C_LONGINT).
897 Meanwhile, quote strings in #error, for consistency.
898 Fix restoring of ac_cpp macro.
899 * configure: Regenerated using autoconf-2.12.
901 * libF77/Version.c, libI77/Version.c, libU77/Version.c:
902 Update version numbers.
903 Change names and code for g77-specific version-printing
904 routines (shorter names should be safer to link on
905 weird, 8-char systems).
907 * libF77/c_cos.c, libF77/c_div.c, libF77/c_exp.c,
908 libF77/c_log.c, libF77/c_sin.c, libF77/c_sqrt.c,
909 libF77/d_cnjg.c, libF77/pow_zi.c, libF77/r_cnjg.c,
910 libF77/z_cos.c, libF77/z_div.c, libF77/z_exp.c,
911 libF77/z_log.c, libF77/z_sin.c, libF77/z_sqrt.c:
912 Changed to work properly even when result is aliased
915 * libF77/makefile, libI77/makefile: Leave these in
916 the g77 distribution, so it is easier to track changes
919 * libF77/signal_.c: Eliminate redundant `return 0;'.
921 * libI77/fio.h (err, errfl): Fix these so they work
922 (and must be expressed) as statements.
923 Fix up many users of err() to include trailing semicolon.
925 * Incorporate changes by Bell Labs to libf2c through 1997-02-07.
927 1997-02-06 Dave Love <d.love@dl.ac.uk>
929 * libU77/etime_.c, libU77/dtime_.c: Fix getrusage stuff.
931 * libU77/config.h.in: Regenerate for HAVE_GETRUSAGE.
933 * libU77/Makefile.in, libI77/Makefile.in, libF77/Makefile.in:
934 Redo *clean targets; distclean and maintainer-clean remove the stage?
935 and include links. This probably want looking at further.
937 Wed Feb 5 00:21:23 1997 Craig Burley <burley@gnu.ai.mit.edu>
939 Add libU77 library from Dave Love <d.love@dl.ac.uk>:
940 * Makefile.in: Add libU77 directory, rules, etc.
941 * configure.in: New libU77 directory, Makefile, etc.
943 * Makefile.in, libF77/Makefile.in, libI77/Makefile.in,
944 libU77/Makefile.in: Reorganize these so $(AR) commands
945 handled by the top-level Makefile instead of the
946 subordinates. This permits it to do $(AR) only when
947 one or more object files actually change, instead of
948 having to force-update it as was necessary before.
949 And that had the disadvantage of requiring, e.g., user
950 root to have access to $(AR) to the library simply to
951 install g77, which might be problematic on an NFS setup.
952 (mostlyclean, clean, distclean, maintainer-clean):
953 Properly handle these rules.
955 * Makefile.in: Don't invoke config.status here -- let
956 compiler-level stuff handle all that.
958 * libI77/err.c [MISSING_FILE_ELEMS]: Declare malloc in this case
959 too, so it doesn't end up as an integer.
961 Sat Feb 1 02:43:48 1997 Craig Burley <burley@gnu.ai.mit.edu>
963 * libF77/Makefile.in: More fixup for $(F90BIT) -- wasn't
964 in list for ar command, and it wasn't correctly listed
965 in the list of things depending on f2c.h.
967 * f2c.h.in: Fix up #error directive.
969 1997-01-31 Dave Love <d.love@dl.ac.uk>
971 * libF77/Makefile.in ($(lib)): Add $(F90BIT); shouldn't exclude
972 stuff f2c needs so we can share the library.
974 Sat Jan 18 19:39:03 1997 Craig Burley <burley@gnu.ai.mit.edu>
976 * configure.in: No longer define ALWAYS_FLUSH, the
977 resulting performance is too low.
979 Wed Dec 18 12:06:02 1996 Craig Burley <burley@gnu.ai.mit.edu>
981 Patch from Mumit Khan <khan@xraylith.wisc.edu>:
982 * libF77/s_paus.c: Add __CYGWIN32__ to list of macros
983 controlling how to pause.
985 Sun Dec 1 21:25:27 1996 Craig Burley <burley@gnu.ai.mit.edu>
987 * configure: Regenerated using autoconf-2.12.
989 Mon Nov 25 21:16:15 1996 Craig Burley <burley@gnu.ai.mit.edu>
991 * configure: Regenerated using autoconf-2.11.
993 1996-11-19 Dave Love <d.love@dl.ac.uk>
995 * libI77/backspace.c: Include sys/types.h for size_t.
997 Wed Nov 6 14:17:27 1996 Craig Burley <burley@gnu.ai.mit.edu>
999 * f2c.h.in: Properly comment out the unsupported stuff so
1000 we don't get build-time errors.
1002 * libF77/Version.c, libI77/Version.c: Restore macro definition
1003 of version information.
1005 * libI77/Makefile.in (OBJ) [foo]: Add ftell_.o to list of objects.
1007 * libI77/uio.c (do_ud): Fix up casts in PAD_UDread case just
1008 like they were fixed in the other case.
1010 Thu Oct 31 22:27:45 1996 Craig Burley <burley@gnu.ai.mit.edu>
1012 * libI77/ftell_.c (fseek_): Map incoming whence argument to
1013 system's actual SEEK_CUR, SEEK_SET, or SEEK_END macro for
1014 fseek(), and crash (gracefully) if the argument is invalid.
1016 1996-10-19 Dave Love <d.love@dl.ac.uk>
1018 * configure.in: Add check that we have the tools to cross-compile
1020 (NO_EOF_CHAR_CHECK,Skip_f2c_Undefs): Define.
1022 * libF77/Makefile.in (F90BIT): New routines from Netlib.
1025 Use more sanitary #error (indented for K&R compliance if necessary) if
1027 Sync with Netlib: Add `uninteger'. (Commented out) integer*8 stuff.
1028 bit_{test,clear,set} macros.
1030 1996-10-19 Dave Love <d.love@dl.ac.uk>
1032 Update to Netlib version of 1996-09-26.
1034 * libI77/Version.c: Use <stdio.h>, not "stdio.h".
1035 * libF77/Version.c: Likewise.
1037 Wed Aug 28 13:25:29 1996 Dave Love <d.love@dl.ac.uk>
1039 * libI77/rsne.c (x_rsne): Use size_t instead of int.
1041 * libI77/endfile.c (copy): Use size_t in place of int.
1043 Wed Aug 28 13:22:20 1996 Dave Love <d.love@dl.ac.uk>
1045 * libI77/backspace.c (f_back): Cast fread arg to size_t.
1047 Tue Aug 27 19:11:30 1996 Dave Love <d.love@dl.ac.uk>
1049 * libI77/Version.c: Supply */ to avoid apparent nested comment.
1051 Tue Aug 20 09:21:43 1996 Dave Love <d.love@dl.ac.uk>
1053 * libF77/Makefile.in (ALL_CFLAGS): Fix missing ../ for include.
1054 * libI77/Makefile.in (ALL_CFLAGS): Likewise.
1056 Sat Aug 17 13:00:47 1996 Dave Love <d.love@dl.ac.uk>
1058 * libF77/qbitshft.c, libF77/qbitbits.c, libF77/lbitshft.c,
1059 libF77/lbitbits.c: New file from Netlib. qbit... not currently
1062 Sun Jul 7 18:06:33 1996 Dave Love <d.love@dl.ac.uk>
1064 * libF77/z_sqrt.c, libF77/z_sin.c, libF77/z_exp.c, libF77/z_log.c,
1065 libF77/system_.c, libF77/z_cos.c, libF77/signal_.c,
1066 libF77/s_stop.c, libF77/sig_die.c, libF77/s_paus.c,
1067 libF77/s_rnge.c, libF77/s_cat.c, libF77/r_tan.c, libF77/r_tanh.c,
1068 libF77/r_sinh.c, libF77/r_sqrt.c, libF77/r_sin.c, libF77/r_mod.c,
1069 libF77/r_nint.c, libF77/r_lg10.c, libF77/r_log.c, libF77/r_exp.c,
1070 libF77/r_int.c, libF77/r_cosh.c, libF77/r_atn2.c, libF77/r_cos.c,
1071 libF77/r_asin.c, libF77/r_atan.c, libF77/r_acos.c,
1072 libF77/pow_dd.c, libF77/pow_zz.c, libF77/main.c, libF77/i_dnnt.c,
1073 libF77/i_nint.c, libF77/h_dnnt.c, libF77/h_nint.c, libF77/exit.c,
1074 libF77/d_tan.c, libF77/d_tanh.c, libF77/d_sqrt.c, libF77/d_sin.c,
1075 libF77/d_sinh.c, libF77/d_mod.c, libF77/d_nint.c, libF77/d_log.c,
1076 libF77/d_int.c, libF77/d_lg10.c, libF77/d_cosh.c, libF77/d_exp.c,
1077 libF77/d_atn2.c, libF77/d_cos.c, libF77/d_atan.c, libF77/d_acos.c,
1078 libF77/d_asin.c, libF77/c_sqrt.c, libF77/cabs.c, libF77/c_sin.c,
1079 libF77/c_exp.c, libF77/c_log.c, libF77/c_cos.c, libF77/F77_aloc.c,
1080 libF77/abort_.c, libI77/xwsne.c, libI77/wref.c, libI77/util.c,
1081 libI77/uio.c, libI77/rsne.c, libI77/rdfmt.c, libI77/rawio.h,
1082 libI77/open.c, libI77/lread.c, libI77/inquire.c, libI77/fio.h,
1083 libI77/err.c, libI77/endfile.c, libI77/close.c:
1084 Use #include <...>, not #include "..." for mkdeps
1086 Sat Jul 6 21:39:21 1996 Dave Love <d.love@dl.ac.uk>
1088 * libI77/ftell_.c: Added from Netlib distribution.
1090 Sat Mar 30 20:57:24 1996 Dave Love <d.love@dl.ac.uk>
1092 * configure.in: Eliminate explicit use of
1093 {RANLIB,AR}_FOR_TARGET.
1094 * Makefile.in: Likewise.
1095 * libF77/Makefile.in: Likewise.
1096 * libI77/Makefile.in: Likewise.
1097 * configure: Regenerated.
1099 Sat Mar 30 21:02:03 1996 Dave Love <d.love@dl.ac.uk>
1101 * Makefile.in: Eliminate explicit use of
1102 {RANLIB,AR}_FOR_TARGET.
1104 Tue Mar 26 23:39:59 1996 Dave Love <d.love@dl.ac.uk>
1106 * Makefile.in: Remove hardwired RANLIB and RANLIB_TEST (unnoted
1109 Mon Mar 25 21:04:56 1996 Craig Burley <burley@gnu.ai.mit.edu>
1111 * Incorporate changes by Bell Labs to libf2c through 1996-03-23,
1112 including changes to dmg and netlib email addresses.
1114 Tue Mar 19 13:10:02 1996 Craig Burley <burley@gnu.ai.mit.edu>
1116 * Incorporate changes by AT&T/Bellcore to libf2c through 1996-03-19.
1118 * Makefile.in (rebuilt): New target.
1120 * libF77/Makefile.in, libI77/Makefile.in: Use $AR_FOR_TARGET, not
1123 Tue Mar 19 12:53:19 1996 Dave Love <d.love@dl.ac.uk>
1125 * configure.in (ac_cpp): #include <stdio.h> instead
1128 Tue Mar 19 12:52:09 1996 Mumit Khan <khan@xraylith.wisc.edu>
1130 * configure.in (ac_cpp): For f2c integer type,
1131 add -I$srcdir/../.. to make it work on mips-ultrix4.2.
1133 Sat Mar 9 17:37:15 1996 Craig Burley <burley@gnu.ai.mit.edu>
1135 * libI77/Makefile.in (.c.o): Add -DAllow_TYQUAD, to enable
1136 I/O support for INTEGER*8.
1137 * f2c.h.in: Turn on longint type.
1139 Fri Dec 29 18:22:01 1995 Craig Burley <burley@gnu.ai.mit.edu>
1141 * Makefile.in: Reorganize the *clean rules to more closely
1144 * libF77/Makefile.in, libI77/Makefile.in: Ignore error from $(AR)
1145 command, in case just doing an install and installer has no write
1146 access to library (this is a kludge fix -- perhaps install targets
1147 should never try updating anything?).
1149 Sat Nov 18 19:37:22 1995 Craig Burley (burley@gnu.ai.mit.edu)
1151 * Version 0.5.17 released.
1153 Thu Nov 16 07:20:35 1995 Craig Burley (burley@gnu.ai.mit.edu)
1155 * Incorporate changes by AT&T/Bellcore to libf2c through 1995-11-15.
1157 Fri Sep 22 02:19:59 1995 Craig Burley (burley@gnu.ai.mit.edu)
1159 * libI77/backspace.c, libI77/close.c, libI77/endfile.c,
1160 libI77/fio.h, libI77/inquire.c, libI77/rawio.h,
1161 libF77/s_paus.c: Not an MSDOS system if GO32
1162 is defined, in the sense that the run-time environment
1163 is thus more UNIX-like.
1165 Wed Sep 20 02:24:51 1995 Craig Burley (burley@gnu.ai.mit.edu)
1167 * libF77/Makefile.in, libI77/Makefile.in: Comment out `ld -r -x'
1168 and `mv' line pairs, since `-x' isn't supported on systems
1169 such as Solaris, and these lines don't seem to do anything
1172 Wed Aug 30 15:58:35 1995 Craig Burley (burley@gnu.ai.mit.edu)
1174 * Version 0.5.16 released.
1176 * Incorporate changes by AT&T/Bellcore to libf2c through 950829.
1178 Mon Aug 28 12:50:34 1995 Craig Burley (burley@gnu.ai.mit.edu)
1180 * libF77/Makefile.in, libI77/Makefile.in ($(lib)): Force ar'ing
1181 and ranlib'ing of libf2c.a, else after rm'ing libf2c.a and
1182 doing a make, only libI77 or libF77 would be added to
1183 the newly created archive.
1184 Also, instead of `$?' list all targets explicitly so all
1185 objects are updated in libf2c.a even if only one actually
1186 needs recompiling, for similar reason -- we can't easily tell
1187 if a given object is really up-to-date in libf2c.a, or even
1190 Sun Aug 27 14:54:24 1995 Craig Burley (burley@gnu.ai.mit.edu)
1192 * libF77/Makefile.in, libI77/Makefile.in: Fix spacing so
1193 initial tabs are present in all appropriate places.
1194 Move identical $(AR) commands in if then/else clauses
1195 to single command preceding if.
1196 (.c.o, Version[FI].o): Use $@ instead of $* because AIX (RS/6000)
1197 says $@ means source, not object, basename, and $@ seems to work
1200 Wed Aug 23 15:44:25 1995 Craig Burley (burley@gnu.ai.mit.edu)
1202 * libF77/system_.c (system_): Declare as returning `ftnint',
1203 consistent with signal_, instead of defaulting to `int'.
1204 Hope dmg@research.att.com agrees, else probably will
1205 change to whatever he determines is correct (and change
1208 Thu Aug 17 08:46:17 1995 Craig Burley (burley@gnu.ai.mit.edu)
1210 * libI77/rsne.c (s_rsne): Call f_init if not already done.
1212 Thu Aug 17 04:35:28 1995 Craig Burley (burley@gnu.ai.mit.edu)
1214 * Incorporate changes by Bellcore to libf2c through 950817.
1215 And this text is for EMACS: (foo at bar).
1217 Wed Aug 16 17:33:06 1995 Craig Burley (burley@gnu.ai.mit.edu)
1219 * libF77/Makefile.in, libI77/Makefile.in (CFLAGS): Put -g1
1220 after configured CFLAGS but before GCC_CFLAGS, so by default
1221 the libraries are built with minimal debugging information.
1223 Fri Jul 28 10:30:15 1995 Dave Love <d.love@dl.ac.uk>
1225 * libI77/open.c (f_open): Call f_init if not already done.
1227 Sat Jul 1 19:31:56 1995 Craig Burley (burley@gnu.ai.mit.edu)
1229 * libF77/system_.c (system_): Make buff one byte bigger so
1230 following byte doesn't get overwritten by call with large
1233 Tue Jun 27 23:28:16 1995 Craig Burley (burley@gnu.ai.mit.edu)
1235 * Incorporate changes by Bellcore to libf2c through 950613.
1237 * libF77/Version.c (__G77_LIBF77_VERSION__): Add this string
1238 to track g77 mods to libf2c.
1240 * libI77/Version.c (__G77_LIBI77_VERSION__): Add this string
1241 to track g77 mods to libf2c.
1243 * libI77/rawio.h: #include <rawio.h> only conditionally,
1244 using macro intended for that purpose.
1246 Fri May 19 11:20:00 1995 Craig Burley (burley@gnu.ai.mit.edu)
1248 * configure.in: Incorporate change made by d.love,
1250 * configure: Regenerated.
1252 Wed Apr 26 21:08:57 BST 1995 Dave Love <d.love@dl.ac.uk>
1254 * configure.in: Fix quoting problem in atexit check.
1256 * configure: Regenerated (with current autoconf).
1258 Wed Mar 15 12:49:58 1995 Craig Burley (burley@gnu.ai.mit.edu)
1260 * Incorporate changes by Bellcore to libf2c through 950315.
1262 Sun Mar 5 18:54:29 1995 Craig Burley (burley@gnu.ai.mit.edu)
1264 * README: Tell people not to read lib[fi]77/README.
1266 Wed Feb 15 14:30:58 1995 Craig Burley (burley@gnu.ai.mit.edu)
1268 * configure.in: Update copyright notice at top of file.
1270 * f2c.h.in (f2c_i2): Make sure defining this crashes compilations.
1272 * libI77/Makefile.in (F2C_H): Fix typo in definition of this
1273 symbol (was FF2C_H=...).
1275 Sun Feb 12 13:39:36 1995 Craig Burley (burley@gnu.ai.mit.edu)
1277 * README: Remove some obsolete items.
1282 Sat Feb 11 22:07:54 1995 Craig Burley (burley@gnu.ai.mit.edu)
1284 * Makefile.in (libf77, libi77): Add rules to .PHONY list.
1286 * f2c.h.in (flag): Make same type as friends.
1288 * libF77/Makefile.in (libf77): Rename to $(lib), remove from
1289 .PHONY list. Fix some typos.
1291 * libI77/Makefile.in (libi77): Rename to $(lib), remove from
1292 .PHONY list. Fix some typos.
1294 Thu Feb 2 12:22:41 1995 Craig Burley (burley@gnu.ai.mit.edu)
1296 * Makefile.in (libF77/Makefile): Fix typos in this rule's name
1299 * libF77/Makefile.in (libf77): Add rule to .PHONY list.
1301 * libI77/Makefile.in (libi77): Add rule to .PHONY list.