1 /* Perform various loop optimizations, including strength reduction.
2 Copyright (C) 1987, 88, 89, 91-97, 1998 Free Software Foundation, Inc.
4 This file is part of GNU CC.
6 GNU CC is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2, or (at your option)
11 GNU CC is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with GNU CC; see the file COPYING. If not, write to
18 the Free Software Foundation, 59 Temple Place - Suite 330,
19 Boston, MA 02111-1307, USA. */
22 /* This is the loop optimization pass of the compiler.
23 It finds invariant computations within loops and moves them
24 to the beginning of the loop. Then it identifies basic and
25 general induction variables. Strength reduction is applied to the general
26 induction variables, and induction variable elimination is applied to
27 the basic induction variables.
29 It also finds cases where
30 a register is set within the loop by zero-extending a narrower value
31 and changes these to zero the entire register once before the loop
32 and merely copy the low part within the loop.
34 Most of the complexity is in heuristics to decide when it is worth
35 while to do these things. */
42 #include "insn-config.h"
43 #include "insn-flags.h"
45 #include "hard-reg-set.h"
52 /* Vector mapping INSN_UIDs to luids.
53 The luids are like uids but increase monotonically always.
54 We use them to see whether a jump comes from outside a given loop. */
58 /* Indexed by INSN_UID, contains the ordinal giving the (innermost) loop
59 number the insn is contained in. */
63 /* 1 + largest uid of any insn. */
67 /* 1 + luid of last insn. */
71 /* Number of loops detected in current function. Used as index to the
74 static int max_loop_num
;
76 /* Indexed by loop number, contains the first and last insn of each loop. */
78 static rtx
*loop_number_loop_starts
, *loop_number_loop_ends
;
80 /* For each loop, gives the containing loop number, -1 if none. */
85 /* The main output of analyze_loop_iterations is placed here */
87 int *loop_can_insert_bct
;
89 /* For each loop, determines whether some of its inner loops has used
92 int *loop_used_count_register
;
94 /* loop parameters for arithmetic loops. These loops have a loop variable
95 which is initialized to loop_start_value, incremented in each iteration
96 by "loop_increment". At the end of the iteration the loop variable is
97 compared to the loop_comparison_value (using loop_comparison_code). */
100 rtx
*loop_comparison_value
;
101 rtx
*loop_start_value
;
102 enum rtx_code
*loop_comparison_code
;
105 /* For each loop, keep track of its unrolling factor.
109 -1: completely unrolled
110 >0: holds the unroll exact factor. */
111 int *loop_unroll_factor
;
113 /* Indexed by loop number, contains a nonzero value if the "loop" isn't
114 really a loop (an insn outside the loop branches into it). */
116 static char *loop_invalid
;
118 /* Indexed by loop number, links together all LABEL_REFs which refer to
119 code labels outside the loop. Used by routines that need to know all
120 loop exits, such as final_biv_value and final_giv_value.
122 This does not include loop exits due to return instructions. This is
123 because all bivs and givs are pseudos, and hence must be dead after a
124 return, so the presense of a return does not affect any of the
125 optimizations that use this info. It is simpler to just not include return
126 instructions on this list. */
128 rtx
*loop_number_exit_labels
;
130 /* Indexed by loop number, counts the number of LABEL_REFs on
131 loop_number_exit_labels for this loop and all loops nested inside it. */
133 int *loop_number_exit_count
;
135 /* Holds the number of loop iterations. It is zero if the number could not be
136 calculated. Must be unsigned since the number of iterations can
137 be as high as 2^wordsize-1. For loops with a wider iterator, this number
138 will will be zero if the number of loop iterations is too large for an
139 unsigned integer to hold. */
141 unsigned HOST_WIDE_INT loop_n_iterations
;
143 /* Nonzero if there is a subroutine call in the current loop. */
145 static int loop_has_call
;
147 /* Nonzero if there is a volatile memory reference in the current
150 static int loop_has_volatile
;
152 /* Added loop_continue which is the NOTE_INSN_LOOP_CONT of the
153 current loop. A continue statement will generate a branch to
154 NEXT_INSN (loop_continue). */
156 static rtx loop_continue
;
158 /* Indexed by register number, contains the number of times the reg
159 is set during the loop being scanned.
160 During code motion, a negative value indicates a reg that has been
161 made a candidate; in particular -2 means that it is an candidate that
162 we know is equal to a constant and -1 means that it is an candidate
163 not known equal to a constant.
164 After code motion, regs moved have 0 (which is accurate now)
165 while the failed candidates have the original number of times set.
167 Therefore, at all times, == 0 indicates an invariant register;
168 < 0 a conditionally invariant one. */
170 static int *n_times_set
;
172 /* Original value of n_times_set; same except that this value
173 is not set negative for a reg whose sets have been made candidates
174 and not set to 0 for a reg that is moved. */
176 static int *n_times_used
;
178 /* Index by register number, 1 indicates that the register
179 cannot be moved or strength reduced. */
181 static char *may_not_optimize
;
183 /* Nonzero means reg N has already been moved out of one loop.
184 This reduces the desire to move it out of another. */
186 static char *moved_once
;
188 /* Array of MEMs that are stored in this loop. If there are too many to fit
189 here, we just turn on unknown_address_altered. */
191 #define NUM_STORES 30
192 static rtx loop_store_mems
[NUM_STORES
];
194 /* Index of first available slot in above array. */
195 static int loop_store_mems_idx
;
197 /* Nonzero if we don't know what MEMs were changed in the current loop.
198 This happens if the loop contains a call (in which case `loop_has_call'
199 will also be set) or if we store into more than NUM_STORES MEMs. */
201 static int unknown_address_altered
;
203 /* Count of movable (i.e. invariant) instructions discovered in the loop. */
204 static int num_movables
;
206 /* Count of memory write instructions discovered in the loop. */
207 static int num_mem_sets
;
209 /* Number of loops contained within the current one, including itself. */
210 static int loops_enclosed
;
212 /* Bound on pseudo register number before loop optimization.
213 A pseudo has valid regscan info if its number is < max_reg_before_loop. */
214 int max_reg_before_loop
;
216 /* This obstack is used in product_cheap_p to allocate its rtl. It
217 may call gen_reg_rtx which, in turn, may reallocate regno_reg_rtx.
218 If we used the same obstack that it did, we would be deallocating
221 static struct obstack temp_obstack
;
223 /* This is where the pointer to the obstack being used for RTL is stored. */
225 extern struct obstack
*rtl_obstack
;
227 #define obstack_chunk_alloc xmalloc
228 #define obstack_chunk_free free
230 extern char *oballoc ();
232 /* During the analysis of a loop, a chain of `struct movable's
233 is made to record all the movable insns found.
234 Then the entire chain can be scanned to decide which to move. */
238 rtx insn
; /* A movable insn */
239 rtx set_src
; /* The expression this reg is set from. */
240 rtx set_dest
; /* The destination of this SET. */
241 rtx dependencies
; /* When INSN is libcall, this is an EXPR_LIST
242 of any registers used within the LIBCALL. */
243 int consec
; /* Number of consecutive following insns
244 that must be moved with this one. */
245 int regno
; /* The register it sets */
246 short lifetime
; /* lifetime of that register;
247 may be adjusted when matching movables
248 that load the same value are found. */
249 short savings
; /* Number of insns we can move for this reg,
250 including other movables that force this
251 or match this one. */
252 unsigned int cond
: 1; /* 1 if only conditionally movable */
253 unsigned int force
: 1; /* 1 means MUST move this insn */
254 unsigned int global
: 1; /* 1 means reg is live outside this loop */
255 /* If PARTIAL is 1, GLOBAL means something different:
256 that the reg is live outside the range from where it is set
257 to the following label. */
258 unsigned int done
: 1; /* 1 inhibits further processing of this */
260 unsigned int partial
: 1; /* 1 means this reg is used for zero-extending.
261 In particular, moving it does not make it
263 unsigned int move_insn
: 1; /* 1 means that we call emit_move_insn to
264 load SRC, rather than copying INSN. */
265 unsigned int move_insn_first
:1;/* Same as above, if this is necessary for the
266 first insn of a consecutive sets group. */
267 unsigned int is_equiv
: 1; /* 1 means a REG_EQUIV is present on INSN. */
268 enum machine_mode savemode
; /* Nonzero means it is a mode for a low part
269 that we should avoid changing when clearing
270 the rest of the reg. */
271 struct movable
*match
; /* First entry for same value */
272 struct movable
*forces
; /* An insn that must be moved if this is */
273 struct movable
*next
;
276 FILE *loop_dump_stream
;
278 /* Forward declarations. */
280 static void find_and_verify_loops
PROTO((rtx
));
281 static void mark_loop_jump
PROTO((rtx
, int));
282 static void prescan_loop
PROTO((rtx
, rtx
));
283 static int reg_in_basic_block_p
PROTO((rtx
, rtx
));
284 static int consec_sets_invariant_p
PROTO((rtx
, int, rtx
));
285 static rtx libcall_other_reg
PROTO((rtx
, rtx
));
286 static int labels_in_range_p
PROTO((rtx
, int));
287 static void count_loop_regs_set
PROTO((rtx
, rtx
, char *, rtx
*, int *, int));
288 static void note_addr_stored
PROTO((rtx
, rtx
));
289 static int loop_reg_used_before_p
PROTO((rtx
, rtx
, rtx
, rtx
, rtx
));
290 static void scan_loop
PROTO((rtx
, rtx
, int, int));
292 static void replace_call_address
PROTO(());
294 static rtx skip_consec_insns
PROTO((rtx
, int));
295 static int libcall_benefit
PROTO((rtx
));
296 static void ignore_some_movables
PROTO((struct movable
*));
297 static void force_movables
PROTO((struct movable
*));
298 static void combine_movables
PROTO((struct movable
*, int));
299 static int regs_match_p
PROTO((rtx
, rtx
, struct movable
*));
300 static int rtx_equal_for_loop_p
PROTO((rtx
, rtx
, struct movable
*));
301 static void add_label_notes
PROTO((rtx
, rtx
));
302 static void move_movables
PROTO((struct movable
*, int, int, rtx
, rtx
, int));
303 static int count_nonfixed_reads
PROTO((rtx
));
304 static void strength_reduce
PROTO((rtx
, rtx
, rtx
, int, rtx
, rtx
, int));
305 static void find_single_use_in_loop
PROTO((rtx
, rtx
, rtx
*));
306 static int valid_initial_value_p
PROTO((rtx
, rtx
, int, rtx
));
307 static void find_mem_givs
PROTO((rtx
, rtx
, int, rtx
, rtx
));
308 static void record_biv
PROTO((struct induction
*, rtx
, rtx
, rtx
, rtx
, int, int));
309 static void check_final_value
PROTO((struct induction
*, rtx
, rtx
));
310 static void record_giv
PROTO((struct induction
*, rtx
, rtx
, rtx
, rtx
, rtx
, int, enum g_types
, int, rtx
*, rtx
, rtx
));
311 static void update_giv_derive
PROTO((rtx
));
312 static int basic_induction_var
PROTO((rtx
, enum machine_mode
, rtx
, rtx
, rtx
*, rtx
*));
313 static rtx simplify_giv_expr
PROTO((rtx
, int *));
314 static int general_induction_var
PROTO((rtx
, rtx
*, rtx
*, rtx
*));
315 static int consec_sets_giv
PROTO((int, rtx
, rtx
, rtx
, rtx
*, rtx
*));
316 static int check_dbra_loop
PROTO((rtx
, int, rtx
));
318 static rtx express_from
PROTO((struct induction
*, struct induction
*));
320 static int combine_givs_p
PROTO((struct induction
*, struct induction
*));
321 #ifdef GIV_SORT_CRITERION
322 static int giv_sort
PROTO((struct induction
**, struct induction
**));
324 static void combine_givs
PROTO((struct iv_class
*));
325 static int product_cheap_p
PROTO((rtx
, rtx
));
326 static int maybe_eliminate_biv
PROTO((struct iv_class
*, rtx
, rtx
, int, int, int));
327 static int maybe_eliminate_biv_1
PROTO((rtx
, rtx
, struct iv_class
*, int, rtx
));
328 static int last_use_this_basic_block
PROTO((rtx
, rtx
));
329 static void record_initial
PROTO((rtx
, rtx
));
330 static void update_reg_last_use
PROTO((rtx
, rtx
));
333 /* This is extern from unroll.c */
334 extern void iteration_info
PROTO((rtx
, rtx
*, rtx
*, rtx
, rtx
));
336 /* Two main functions for implementing bct:
337 first - to be called before loop unrolling, and the second - after */
338 #ifdef HAVE_decrement_and_branch_on_count
339 static void analyze_loop_iterations
PROTO((rtx
, rtx
));
340 static void insert_bct
PROTO((rtx
, rtx
));
342 /* Auxiliary function that inserts the bct pattern into the loop */
343 static void instrument_loop_bct
PROTO((rtx
, rtx
, rtx
));
344 #endif /* HAVE_decrement_and_branch_on_count */
347 /* Indirect_jump_in_function is computed once per function. */
348 int indirect_jump_in_function
= 0;
349 static int indirect_jump_in_function_p
PROTO((rtx
));
352 /* Relative gain of eliminating various kinds of operations. */
359 /* Benefit penalty, if a giv is not replaceable, i.e. must emit an insn to
360 copy the value of the strength reduced giv to its original register. */
366 char *free_point
= (char *) oballoc (1);
367 rtx reg
= gen_rtx_REG (word_mode
, LAST_VIRTUAL_REGISTER
+ 1);
369 add_cost
= rtx_cost (gen_rtx_PLUS (word_mode
, reg
, reg
), SET
);
371 /* We multiply by 2 to reconcile the difference in scale between
372 these two ways of computing costs. Otherwise the cost of a copy
373 will be far less than the cost of an add. */
377 /* Free the objects we just allocated. */
380 /* Initialize the obstack used for rtl in product_cheap_p. */
381 gcc_obstack_init (&temp_obstack
);
384 /* Entry point of this file. Perform loop optimization
385 on the current function. F is the first insn of the function
386 and DUMPFILE is a stream for output of a trace of actions taken
387 (or 0 if none should be output). */
390 loop_optimize (f
, dumpfile
, unroll_p
)
391 /* f is the first instruction of a chain of insns for one function */
400 loop_dump_stream
= dumpfile
;
402 init_recog_no_volatile ();
403 init_alias_analysis ();
405 max_reg_before_loop
= max_reg_num ();
407 moved_once
= (char *) alloca (max_reg_before_loop
);
408 bzero (moved_once
, max_reg_before_loop
);
412 /* Count the number of loops. */
415 for (insn
= f
; insn
; insn
= NEXT_INSN (insn
))
417 if (GET_CODE (insn
) == NOTE
418 && NOTE_LINE_NUMBER (insn
) == NOTE_INSN_LOOP_BEG
)
422 /* Don't waste time if no loops. */
423 if (max_loop_num
== 0)
426 /* Get size to use for tables indexed by uids.
427 Leave some space for labels allocated by find_and_verify_loops. */
428 max_uid_for_loop
= get_max_uid () + 1 + max_loop_num
* 32;
430 uid_luid
= (int *) alloca (max_uid_for_loop
* sizeof (int));
431 uid_loop_num
= (int *) alloca (max_uid_for_loop
* sizeof (int));
433 bzero ((char *) uid_luid
, max_uid_for_loop
* sizeof (int));
434 bzero ((char *) uid_loop_num
, max_uid_for_loop
* sizeof (int));
436 /* Allocate tables for recording each loop. We set each entry, so they need
438 loop_number_loop_starts
= (rtx
*) alloca (max_loop_num
* sizeof (rtx
));
439 loop_number_loop_ends
= (rtx
*) alloca (max_loop_num
* sizeof (rtx
));
440 loop_outer_loop
= (int *) alloca (max_loop_num
* sizeof (int));
441 loop_invalid
= (char *) alloca (max_loop_num
* sizeof (char));
442 loop_number_exit_labels
= (rtx
*) alloca (max_loop_num
* sizeof (rtx
));
443 loop_number_exit_count
= (int *) alloca (max_loop_num
* sizeof (int));
445 /* This is initialized by the unrolling code, so we go ahead
446 and clear them just in case we are not performing loop
448 loop_unroll_factor
= (int *) alloca (max_loop_num
*sizeof (int));
449 bzero ((char *) loop_unroll_factor
, max_loop_num
* sizeof (int));
452 /* Allocate for BCT optimization */
453 loop_can_insert_bct
= (int *) alloca (max_loop_num
* sizeof (int));
454 bzero ((char *) loop_can_insert_bct
, max_loop_num
* sizeof (int));
456 loop_used_count_register
= (int *) alloca (max_loop_num
* sizeof (int));
457 bzero ((char *) loop_used_count_register
, max_loop_num
* sizeof (int));
459 loop_increment
= (rtx
*) alloca (max_loop_num
* sizeof (rtx
));
460 loop_comparison_value
= (rtx
*) alloca (max_loop_num
* sizeof (rtx
));
461 loop_start_value
= (rtx
*) alloca (max_loop_num
* sizeof (rtx
));
462 bzero ((char *) loop_increment
, max_loop_num
* sizeof (rtx
));
463 bzero ((char *) loop_comparison_value
, max_loop_num
* sizeof (rtx
));
464 bzero ((char *) loop_start_value
, max_loop_num
* sizeof (rtx
));
467 = (enum rtx_code
*) alloca (max_loop_num
* sizeof (enum rtx_code
));
468 bzero ((char *) loop_comparison_code
, max_loop_num
* sizeof (enum rtx_code
));
471 /* Find and process each loop.
472 First, find them, and record them in order of their beginnings. */
473 find_and_verify_loops (f
);
475 /* Now find all register lifetimes. This must be done after
476 find_and_verify_loops, because it might reorder the insns in the
478 reg_scan (f
, max_reg_num (), 1);
480 /* See if we went too far. */
481 if (get_max_uid () > max_uid_for_loop
)
483 /* Now reset it to the actual size we need. See above. */
484 max_uid_for_loop
= get_max_uid () + 1;
486 /* Compute the mapping from uids to luids.
487 LUIDs are numbers assigned to insns, like uids,
488 except that luids increase monotonically through the code.
489 Don't assign luids to line-number NOTEs, so that the distance in luids
490 between two insns is not affected by -g. */
492 for (insn
= f
, i
= 0; insn
; insn
= NEXT_INSN (insn
))
495 if (GET_CODE (insn
) != NOTE
496 || NOTE_LINE_NUMBER (insn
) <= 0)
497 uid_luid
[INSN_UID (insn
)] = ++i
;
499 /* Give a line number note the same luid as preceding insn. */
500 uid_luid
[INSN_UID (insn
)] = i
;
505 /* Don't leave gaps in uid_luid for insns that have been
506 deleted. It is possible that the first or last insn
507 using some register has been deleted by cross-jumping.
508 Make sure that uid_luid for that former insn's uid
509 points to the general area where that insn used to be. */
510 for (i
= 0; i
< max_uid_for_loop
; i
++)
512 uid_luid
[0] = uid_luid
[i
];
513 if (uid_luid
[0] != 0)
516 for (i
= 0; i
< max_uid_for_loop
; i
++)
517 if (uid_luid
[i
] == 0)
518 uid_luid
[i
] = uid_luid
[i
- 1];
520 /* Create a mapping from loops to BLOCK tree nodes. */
521 if (unroll_p
&& write_symbols
!= NO_DEBUG
)
522 find_loop_tree_blocks ();
524 /* Determine if the function has indirect jump. On some systems
525 this prevents low overhead loop instructions from being used. */
526 indirect_jump_in_function
= indirect_jump_in_function_p (f
);
528 /* Now scan the loops, last ones first, since this means inner ones are done
529 before outer ones. */
530 for (i
= max_loop_num
-1; i
>= 0; i
--)
531 if (! loop_invalid
[i
] && loop_number_loop_ends
[i
])
532 scan_loop (loop_number_loop_starts
[i
], loop_number_loop_ends
[i
],
533 max_reg_num (), unroll_p
);
535 /* If debugging and unrolling loops, we must replicate the tree nodes
536 corresponding to the blocks inside the loop, so that the original one
537 to one mapping will remain. */
538 if (unroll_p
&& write_symbols
!= NO_DEBUG
)
539 unroll_block_trees ();
542 /* Optimize one loop whose start is LOOP_START and end is END.
543 LOOP_START is the NOTE_INSN_LOOP_BEG and END is the matching
544 NOTE_INSN_LOOP_END. */
546 /* ??? Could also move memory writes out of loops if the destination address
547 is invariant, the source is invariant, the memory write is not volatile,
548 and if we can prove that no read inside the loop can read this address
549 before the write occurs. If there is a read of this address after the
550 write, then we can also mark the memory read as invariant. */
553 scan_loop (loop_start
, end
, nregs
, unroll_p
)
560 /* 1 if we are scanning insns that could be executed zero times. */
562 /* 1 if we are scanning insns that might never be executed
563 due to a subroutine call which might exit before they are reached. */
565 /* For a rotated loop that is entered near the bottom,
566 this is the label at the top. Otherwise it is zero. */
568 /* Jump insn that enters the loop, or 0 if control drops in. */
569 rtx loop_entry_jump
= 0;
570 /* Place in the loop where control enters. */
572 /* Number of insns in the loop. */
577 /* The SET from an insn, if it is the only SET in the insn. */
579 /* Chain describing insns movable in current loop. */
580 struct movable
*movables
= 0;
581 /* Last element in `movables' -- so we can add elements at the end. */
582 struct movable
*last_movable
= 0;
583 /* Ratio of extra register life span we can justify
584 for saving an instruction. More if loop doesn't call subroutines
585 since in that case saving an insn makes more difference
586 and more registers are available. */
588 /* If we have calls, contains the insn in which a register was used
589 if it was used exactly once; contains const0_rtx if it was used more
591 rtx
*reg_single_usage
= 0;
592 /* Nonzero if we are scanning instructions in a sub-loop. */
595 n_times_set
= (int *) alloca (nregs
* sizeof (int));
596 n_times_used
= (int *) alloca (nregs
* sizeof (int));
597 may_not_optimize
= (char *) alloca (nregs
);
599 /* Determine whether this loop starts with a jump down to a test at
600 the end. This will occur for a small number of loops with a test
601 that is too complex to duplicate in front of the loop.
603 We search for the first insn or label in the loop, skipping NOTEs.
604 However, we must be careful not to skip past a NOTE_INSN_LOOP_BEG
605 (because we might have a loop executed only once that contains a
606 loop which starts with a jump to its exit test) or a NOTE_INSN_LOOP_END
607 (in case we have a degenerate loop).
609 Note that if we mistakenly think that a loop is entered at the top
610 when, in fact, it is entered at the exit test, the only effect will be
611 slightly poorer optimization. Making the opposite error can generate
612 incorrect code. Since very few loops now start with a jump to the
613 exit test, the code here to detect that case is very conservative. */
615 for (p
= NEXT_INSN (loop_start
);
617 && GET_CODE (p
) != CODE_LABEL
&& GET_RTX_CLASS (GET_CODE (p
)) != 'i'
618 && (GET_CODE (p
) != NOTE
619 || (NOTE_LINE_NUMBER (p
) != NOTE_INSN_LOOP_BEG
620 && NOTE_LINE_NUMBER (p
) != NOTE_INSN_LOOP_END
));
626 /* Set up variables describing this loop. */
627 prescan_loop (loop_start
, end
);
628 threshold
= (loop_has_call
? 1 : 2) * (1 + n_non_fixed_regs
);
630 /* If loop has a jump before the first label,
631 the true entry is the target of that jump.
632 Start scan from there.
633 But record in LOOP_TOP the place where the end-test jumps
634 back to so we can scan that after the end of the loop. */
635 if (GET_CODE (p
) == JUMP_INSN
)
639 /* Loop entry must be unconditional jump (and not a RETURN) */
641 && JUMP_LABEL (p
) != 0
642 /* Check to see whether the jump actually
643 jumps out of the loop (meaning it's no loop).
644 This case can happen for things like
645 do {..} while (0). If this label was generated previously
646 by loop, we can't tell anything about it and have to reject
648 && INSN_UID (JUMP_LABEL (p
)) < max_uid_for_loop
649 && INSN_LUID (JUMP_LABEL (p
)) >= INSN_LUID (loop_start
)
650 && INSN_LUID (JUMP_LABEL (p
)) < INSN_LUID (end
))
652 loop_top
= next_label (scan_start
);
653 scan_start
= JUMP_LABEL (p
);
657 /* If SCAN_START was an insn created by loop, we don't know its luid
658 as required by loop_reg_used_before_p. So skip such loops. (This
659 test may never be true, but it's best to play it safe.)
661 Also, skip loops where we do not start scanning at a label. This
662 test also rejects loops starting with a JUMP_INSN that failed the
665 if (INSN_UID (scan_start
) >= max_uid_for_loop
666 || GET_CODE (scan_start
) != CODE_LABEL
)
668 if (loop_dump_stream
)
669 fprintf (loop_dump_stream
, "\nLoop from %d to %d is phony.\n\n",
670 INSN_UID (loop_start
), INSN_UID (end
));
674 /* Count number of times each reg is set during this loop.
675 Set may_not_optimize[I] if it is not safe to move out
676 the setting of register I. If this loop has calls, set
677 reg_single_usage[I]. */
679 bzero ((char *) n_times_set
, nregs
* sizeof (int));
680 bzero (may_not_optimize
, nregs
);
684 reg_single_usage
= (rtx
*) alloca (nregs
* sizeof (rtx
));
685 bzero ((char *) reg_single_usage
, nregs
* sizeof (rtx
));
688 count_loop_regs_set (loop_top
? loop_top
: loop_start
, end
,
689 may_not_optimize
, reg_single_usage
, &insn_count
, nregs
);
691 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
692 may_not_optimize
[i
] = 1, n_times_set
[i
] = 1;
693 bcopy ((char *) n_times_set
, (char *) n_times_used
, nregs
* sizeof (int));
695 if (loop_dump_stream
)
697 fprintf (loop_dump_stream
, "\nLoop from %d to %d: %d real insns.\n",
698 INSN_UID (loop_start
), INSN_UID (end
), insn_count
);
700 fprintf (loop_dump_stream
, "Continue at insn %d.\n",
701 INSN_UID (loop_continue
));
704 /* Scan through the loop finding insns that are safe to move.
705 Set n_times_set negative for the reg being set, so that
706 this reg will be considered invariant for subsequent insns.
707 We consider whether subsequent insns use the reg
708 in deciding whether it is worth actually moving.
710 MAYBE_NEVER is nonzero if we have passed a conditional jump insn
711 and therefore it is possible that the insns we are scanning
712 would never be executed. At such times, we must make sure
713 that it is safe to execute the insn once instead of zero times.
714 When MAYBE_NEVER is 0, all insns will be executed at least once
715 so that is not a problem. */
721 /* At end of a straight-in loop, we are done.
722 At end of a loop entered at the bottom, scan the top. */
735 if (GET_RTX_CLASS (GET_CODE (p
)) == 'i'
736 && find_reg_note (p
, REG_LIBCALL
, NULL_RTX
))
738 else if (GET_RTX_CLASS (GET_CODE (p
)) == 'i'
739 && find_reg_note (p
, REG_RETVAL
, NULL_RTX
))
742 if (GET_CODE (p
) == INSN
743 && (set
= single_set (p
))
744 && GET_CODE (SET_DEST (set
)) == REG
745 && ! may_not_optimize
[REGNO (SET_DEST (set
))])
750 rtx src
= SET_SRC (set
);
751 rtx dependencies
= 0;
753 /* Figure out what to use as a source of this insn. If a REG_EQUIV
754 note is given or if a REG_EQUAL note with a constant operand is
755 specified, use it as the source and mark that we should move
756 this insn by calling emit_move_insn rather that duplicating the
759 Otherwise, only use the REG_EQUAL contents if a REG_RETVAL note
761 temp
= find_reg_note (p
, REG_EQUIV
, NULL_RTX
);
763 src
= XEXP (temp
, 0), move_insn
= 1;
766 temp
= find_reg_note (p
, REG_EQUAL
, NULL_RTX
);
767 if (temp
&& CONSTANT_P (XEXP (temp
, 0)))
768 src
= XEXP (temp
, 0), move_insn
= 1;
769 if (temp
&& find_reg_note (p
, REG_RETVAL
, NULL_RTX
))
771 src
= XEXP (temp
, 0);
772 /* A libcall block can use regs that don't appear in
773 the equivalent expression. To move the libcall,
774 we must move those regs too. */
775 dependencies
= libcall_other_reg (p
, src
);
779 /* Don't try to optimize a register that was made
780 by loop-optimization for an inner loop.
781 We don't know its life-span, so we can't compute the benefit. */
782 if (REGNO (SET_DEST (set
)) >= max_reg_before_loop
)
784 /* In order to move a register, we need to have one of three cases:
785 (1) it is used only in the same basic block as the set
786 (2) it is not a user variable and it is not used in the
787 exit test (this can cause the variable to be used
788 before it is set just like a user-variable).
789 (3) the set is guaranteed to be executed once the loop starts,
790 and the reg is not used until after that. */
791 else if (! ((! maybe_never
792 && ! loop_reg_used_before_p (set
, p
, loop_start
,
794 || (! REG_USERVAR_P (SET_DEST (set
))
795 && ! REG_LOOP_TEST_P (SET_DEST (set
)))
796 || reg_in_basic_block_p (p
, SET_DEST (set
))))
798 else if ((tem
= invariant_p (src
))
799 && (dependencies
== 0
800 || (tem2
= invariant_p (dependencies
)) != 0)
801 && (n_times_set
[REGNO (SET_DEST (set
))] == 1
803 = consec_sets_invariant_p (SET_DEST (set
),
804 n_times_set
[REGNO (SET_DEST (set
))],
806 /* If the insn can cause a trap (such as divide by zero),
807 can't move it unless it's guaranteed to be executed
808 once loop is entered. Even a function call might
809 prevent the trap insn from being reached
810 (since it might exit!) */
811 && ! ((maybe_never
|| call_passed
)
812 && may_trap_p (src
)))
814 register struct movable
*m
;
815 register int regno
= REGNO (SET_DEST (set
));
817 /* A potential lossage is where we have a case where two insns
818 can be combined as long as they are both in the loop, but
819 we move one of them outside the loop. For large loops,
820 this can lose. The most common case of this is the address
821 of a function being called.
823 Therefore, if this register is marked as being used exactly
824 once if we are in a loop with calls (a "large loop"), see if
825 we can replace the usage of this register with the source
826 of this SET. If we can, delete this insn.
828 Don't do this if P has a REG_RETVAL note or if we have
829 SMALL_REGISTER_CLASSES and SET_SRC is a hard register. */
831 if (reg_single_usage
&& reg_single_usage
[regno
] != 0
832 && reg_single_usage
[regno
] != const0_rtx
833 && REGNO_FIRST_UID (regno
) == INSN_UID (p
)
834 && (REGNO_LAST_UID (regno
)
835 == INSN_UID (reg_single_usage
[regno
]))
836 && n_times_set
[REGNO (SET_DEST (set
))] == 1
837 && ! side_effects_p (SET_SRC (set
))
838 && ! find_reg_note (p
, REG_RETVAL
, NULL_RTX
)
839 && (! SMALL_REGISTER_CLASSES
840 || (! (GET_CODE (SET_SRC (set
)) == REG
841 && REGNO (SET_SRC (set
)) < FIRST_PSEUDO_REGISTER
)))
842 /* This test is not redundant; SET_SRC (set) might be
843 a call-clobbered register and the life of REGNO
844 might span a call. */
845 && ! modified_between_p (SET_SRC (set
), p
,
846 reg_single_usage
[regno
])
847 && no_labels_between_p (p
, reg_single_usage
[regno
])
848 && validate_replace_rtx (SET_DEST (set
), SET_SRC (set
),
849 reg_single_usage
[regno
]))
851 /* Replace any usage in a REG_EQUAL note. Must copy the
852 new source, so that we don't get rtx sharing between the
853 SET_SOURCE and REG_NOTES of insn p. */
854 REG_NOTES (reg_single_usage
[regno
])
855 = replace_rtx (REG_NOTES (reg_single_usage
[regno
]),
856 SET_DEST (set
), copy_rtx (SET_SRC (set
)));
859 NOTE_LINE_NUMBER (p
) = NOTE_INSN_DELETED
;
860 NOTE_SOURCE_FILE (p
) = 0;
861 n_times_set
[regno
] = 0;
865 m
= (struct movable
*) alloca (sizeof (struct movable
));
869 m
->dependencies
= dependencies
;
870 m
->set_dest
= SET_DEST (set
);
872 m
->consec
= n_times_set
[REGNO (SET_DEST (set
))] - 1;
876 m
->move_insn
= move_insn
;
877 m
->move_insn_first
= 0;
878 m
->is_equiv
= (find_reg_note (p
, REG_EQUIV
, NULL_RTX
) != 0);
879 m
->savemode
= VOIDmode
;
881 /* Set M->cond if either invariant_p or consec_sets_invariant_p
882 returned 2 (only conditionally invariant). */
883 m
->cond
= ((tem
| tem1
| tem2
) > 1);
884 m
->global
= (uid_luid
[REGNO_LAST_UID (regno
)] > INSN_LUID (end
)
885 || uid_luid
[REGNO_FIRST_UID (regno
)] < INSN_LUID (loop_start
));
887 m
->lifetime
= (uid_luid
[REGNO_LAST_UID (regno
)]
888 - uid_luid
[REGNO_FIRST_UID (regno
)]);
889 m
->savings
= n_times_used
[regno
];
890 if (find_reg_note (p
, REG_RETVAL
, NULL_RTX
))
891 m
->savings
+= libcall_benefit (p
);
892 n_times_set
[regno
] = move_insn
? -2 : -1;
893 /* Add M to the end of the chain MOVABLES. */
897 last_movable
->next
= m
;
902 /* It is possible for the first instruction to have a
903 REG_EQUAL note but a non-invariant SET_SRC, so we must
904 remember the status of the first instruction in case
905 the last instruction doesn't have a REG_EQUAL note. */
906 m
->move_insn_first
= m
->move_insn
;
908 /* Skip this insn, not checking REG_LIBCALL notes. */
909 p
= next_nonnote_insn (p
);
910 /* Skip the consecutive insns, if there are any. */
911 p
= skip_consec_insns (p
, m
->consec
);
912 /* Back up to the last insn of the consecutive group. */
913 p
= prev_nonnote_insn (p
);
915 /* We must now reset m->move_insn, m->is_equiv, and possibly
916 m->set_src to correspond to the effects of all the
918 temp
= find_reg_note (p
, REG_EQUIV
, NULL_RTX
);
920 m
->set_src
= XEXP (temp
, 0), m
->move_insn
= 1;
923 temp
= find_reg_note (p
, REG_EQUAL
, NULL_RTX
);
924 if (temp
&& CONSTANT_P (XEXP (temp
, 0)))
925 m
->set_src
= XEXP (temp
, 0), m
->move_insn
= 1;
930 m
->is_equiv
= (find_reg_note (p
, REG_EQUIV
, NULL_RTX
) != 0);
933 /* If this register is always set within a STRICT_LOW_PART
934 or set to zero, then its high bytes are constant.
935 So clear them outside the loop and within the loop
936 just load the low bytes.
937 We must check that the machine has an instruction to do so.
938 Also, if the value loaded into the register
939 depends on the same register, this cannot be done. */
940 else if (SET_SRC (set
) == const0_rtx
941 && GET_CODE (NEXT_INSN (p
)) == INSN
942 && (set1
= single_set (NEXT_INSN (p
)))
943 && GET_CODE (set1
) == SET
944 && (GET_CODE (SET_DEST (set1
)) == STRICT_LOW_PART
)
945 && (GET_CODE (XEXP (SET_DEST (set1
), 0)) == SUBREG
)
946 && (SUBREG_REG (XEXP (SET_DEST (set1
), 0))
948 && !reg_mentioned_p (SET_DEST (set
), SET_SRC (set1
)))
950 register int regno
= REGNO (SET_DEST (set
));
951 if (n_times_set
[regno
] == 2)
953 register struct movable
*m
;
954 m
= (struct movable
*) alloca (sizeof (struct movable
));
957 m
->set_dest
= SET_DEST (set
);
964 m
->move_insn_first
= 0;
966 /* If the insn may not be executed on some cycles,
967 we can't clear the whole reg; clear just high part.
968 Not even if the reg is used only within this loop.
975 Clearing x before the inner loop could clobber a value
976 being saved from the last time around the outer loop.
977 However, if the reg is not used outside this loop
978 and all uses of the register are in the same
979 basic block as the store, there is no problem.
981 If this insn was made by loop, we don't know its
982 INSN_LUID and hence must make a conservative
984 m
->global
= (INSN_UID (p
) >= max_uid_for_loop
985 || (uid_luid
[REGNO_LAST_UID (regno
)]
987 || (uid_luid
[REGNO_FIRST_UID (regno
)]
989 || (labels_in_range_p
990 (p
, uid_luid
[REGNO_FIRST_UID (regno
)])));
991 if (maybe_never
&& m
->global
)
992 m
->savemode
= GET_MODE (SET_SRC (set1
));
994 m
->savemode
= VOIDmode
;
998 m
->lifetime
= (uid_luid
[REGNO_LAST_UID (regno
)]
999 - uid_luid
[REGNO_FIRST_UID (regno
)]);
1001 n_times_set
[regno
] = -1;
1002 /* Add M to the end of the chain MOVABLES. */
1006 last_movable
->next
= m
;
1011 /* Past a call insn, we get to insns which might not be executed
1012 because the call might exit. This matters for insns that trap.
1013 Call insns inside a REG_LIBCALL/REG_RETVAL block always return,
1014 so they don't count. */
1015 else if (GET_CODE (p
) == CALL_INSN
&& ! in_libcall
)
1017 /* Past a label or a jump, we get to insns for which we
1018 can't count on whether or how many times they will be
1019 executed during each iteration. Therefore, we can
1020 only move out sets of trivial variables
1021 (those not used after the loop). */
1022 /* Similar code appears twice in strength_reduce. */
1023 else if ((GET_CODE (p
) == CODE_LABEL
|| GET_CODE (p
) == JUMP_INSN
)
1024 /* If we enter the loop in the middle, and scan around to the
1025 beginning, don't set maybe_never for that. This must be an
1026 unconditional jump, otherwise the code at the top of the
1027 loop might never be executed. Unconditional jumps are
1028 followed a by barrier then loop end. */
1029 && ! (GET_CODE (p
) == JUMP_INSN
&& JUMP_LABEL (p
) == loop_top
1030 && NEXT_INSN (NEXT_INSN (p
)) == end
1031 && simplejump_p (p
)))
1033 else if (GET_CODE (p
) == NOTE
)
1035 /* At the virtual top of a converted loop, insns are again known to
1036 be executed: logically, the loop begins here even though the exit
1037 code has been duplicated. */
1038 if (NOTE_LINE_NUMBER (p
) == NOTE_INSN_LOOP_VTOP
&& loop_depth
== 0)
1039 maybe_never
= call_passed
= 0;
1040 else if (NOTE_LINE_NUMBER (p
) == NOTE_INSN_LOOP_BEG
)
1042 else if (NOTE_LINE_NUMBER (p
) == NOTE_INSN_LOOP_END
)
1047 /* If one movable subsumes another, ignore that other. */
1049 ignore_some_movables (movables
);
1051 /* For each movable insn, see if the reg that it loads
1052 leads when it dies right into another conditionally movable insn.
1053 If so, record that the second insn "forces" the first one,
1054 since the second can be moved only if the first is. */
1056 force_movables (movables
);
1058 /* See if there are multiple movable insns that load the same value.
1059 If there are, make all but the first point at the first one
1060 through the `match' field, and add the priorities of them
1061 all together as the priority of the first. */
1063 combine_movables (movables
, nregs
);
1065 /* Now consider each movable insn to decide whether it is worth moving.
1066 Store 0 in n_times_set for each reg that is moved. */
1068 move_movables (movables
, threshold
,
1069 insn_count
, loop_start
, end
, nregs
);
1071 /* Now candidates that still are negative are those not moved.
1072 Change n_times_set to indicate that those are not actually invariant. */
1073 for (i
= 0; i
< nregs
; i
++)
1074 if (n_times_set
[i
] < 0)
1075 n_times_set
[i
] = n_times_used
[i
];
1077 if (flag_strength_reduce
)
1078 strength_reduce (scan_start
, end
, loop_top
,
1079 insn_count
, loop_start
, end
, unroll_p
);
1082 /* Add elements to *OUTPUT to record all the pseudo-regs
1083 mentioned in IN_THIS but not mentioned in NOT_IN_THIS. */
1086 record_excess_regs (in_this
, not_in_this
, output
)
1087 rtx in_this
, not_in_this
;
1094 code
= GET_CODE (in_this
);
1108 if (REGNO (in_this
) >= FIRST_PSEUDO_REGISTER
1109 && ! reg_mentioned_p (in_this
, not_in_this
))
1110 *output
= gen_rtx_EXPR_LIST (VOIDmode
, in_this
, *output
);
1117 fmt
= GET_RTX_FORMAT (code
);
1118 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
1125 for (j
= 0; j
< XVECLEN (in_this
, i
); j
++)
1126 record_excess_regs (XVECEXP (in_this
, i
, j
), not_in_this
, output
);
1130 record_excess_regs (XEXP (in_this
, i
), not_in_this
, output
);
1136 /* Check what regs are referred to in the libcall block ending with INSN,
1137 aside from those mentioned in the equivalent value.
1138 If there are none, return 0.
1139 If there are one or more, return an EXPR_LIST containing all of them. */
1142 libcall_other_reg (insn
, equiv
)
1145 rtx note
= find_reg_note (insn
, REG_RETVAL
, NULL_RTX
);
1146 rtx p
= XEXP (note
, 0);
1149 /* First, find all the regs used in the libcall block
1150 that are not mentioned as inputs to the result. */
1154 if (GET_CODE (p
) == INSN
|| GET_CODE (p
) == JUMP_INSN
1155 || GET_CODE (p
) == CALL_INSN
)
1156 record_excess_regs (PATTERN (p
), equiv
, &output
);
1163 /* Return 1 if all uses of REG
1164 are between INSN and the end of the basic block. */
1167 reg_in_basic_block_p (insn
, reg
)
1170 int regno
= REGNO (reg
);
1173 if (REGNO_FIRST_UID (regno
) != INSN_UID (insn
))
1176 /* Search this basic block for the already recorded last use of the reg. */
1177 for (p
= insn
; p
; p
= NEXT_INSN (p
))
1179 switch (GET_CODE (p
))
1186 /* Ordinary insn: if this is the last use, we win. */
1187 if (REGNO_LAST_UID (regno
) == INSN_UID (p
))
1192 /* Jump insn: if this is the last use, we win. */
1193 if (REGNO_LAST_UID (regno
) == INSN_UID (p
))
1195 /* Otherwise, it's the end of the basic block, so we lose. */
1200 /* It's the end of the basic block, so we lose. */
1208 /* The "last use" doesn't follow the "first use"?? */
1212 /* Compute the benefit of eliminating the insns in the block whose
1213 last insn is LAST. This may be a group of insns used to compute a
1214 value directly or can contain a library call. */
1217 libcall_benefit (last
)
1223 for (insn
= XEXP (find_reg_note (last
, REG_RETVAL
, NULL_RTX
), 0);
1224 insn
!= last
; insn
= NEXT_INSN (insn
))
1226 if (GET_CODE (insn
) == CALL_INSN
)
1227 benefit
+= 10; /* Assume at least this many insns in a library
1229 else if (GET_CODE (insn
) == INSN
1230 && GET_CODE (PATTERN (insn
)) != USE
1231 && GET_CODE (PATTERN (insn
)) != CLOBBER
)
1238 /* Skip COUNT insns from INSN, counting library calls as 1 insn. */
1241 skip_consec_insns (insn
, count
)
1245 for (; count
> 0; count
--)
1249 /* If first insn of libcall sequence, skip to end. */
1250 /* Do this at start of loop, since INSN is guaranteed to
1252 if (GET_CODE (insn
) != NOTE
1253 && (temp
= find_reg_note (insn
, REG_LIBCALL
, NULL_RTX
)))
1254 insn
= XEXP (temp
, 0);
1256 do insn
= NEXT_INSN (insn
);
1257 while (GET_CODE (insn
) == NOTE
);
1263 /* Ignore any movable whose insn falls within a libcall
1264 which is part of another movable.
1265 We make use of the fact that the movable for the libcall value
1266 was made later and so appears later on the chain. */
1269 ignore_some_movables (movables
)
1270 struct movable
*movables
;
1272 register struct movable
*m
, *m1
;
1274 for (m
= movables
; m
; m
= m
->next
)
1276 /* Is this a movable for the value of a libcall? */
1277 rtx note
= find_reg_note (m
->insn
, REG_RETVAL
, NULL_RTX
);
1281 /* Check for earlier movables inside that range,
1282 and mark them invalid. We cannot use LUIDs here because
1283 insns created by loop.c for prior loops don't have LUIDs.
1284 Rather than reject all such insns from movables, we just
1285 explicitly check each insn in the libcall (since invariant
1286 libcalls aren't that common). */
1287 for (insn
= XEXP (note
, 0); insn
!= m
->insn
; insn
= NEXT_INSN (insn
))
1288 for (m1
= movables
; m1
!= m
; m1
= m1
->next
)
1289 if (m1
->insn
== insn
)
1295 /* For each movable insn, see if the reg that it loads
1296 leads when it dies right into another conditionally movable insn.
1297 If so, record that the second insn "forces" the first one,
1298 since the second can be moved only if the first is. */
1301 force_movables (movables
)
1302 struct movable
*movables
;
1304 register struct movable
*m
, *m1
;
1305 for (m1
= movables
; m1
; m1
= m1
->next
)
1306 /* Omit this if moving just the (SET (REG) 0) of a zero-extend. */
1307 if (!m1
->partial
&& !m1
->done
)
1309 int regno
= m1
->regno
;
1310 for (m
= m1
->next
; m
; m
= m
->next
)
1311 /* ??? Could this be a bug? What if CSE caused the
1312 register of M1 to be used after this insn?
1313 Since CSE does not update regno_last_uid,
1314 this insn M->insn might not be where it dies.
1315 But very likely this doesn't matter; what matters is
1316 that M's reg is computed from M1's reg. */
1317 if (INSN_UID (m
->insn
) == REGNO_LAST_UID (regno
)
1320 if (m
!= 0 && m
->set_src
== m1
->set_dest
1321 /* If m->consec, m->set_src isn't valid. */
1325 /* Increase the priority of the moving the first insn
1326 since it permits the second to be moved as well. */
1330 m1
->lifetime
+= m
->lifetime
;
1331 m1
->savings
+= m
->savings
;
1336 /* Find invariant expressions that are equal and can be combined into
1340 combine_movables (movables
, nregs
)
1341 struct movable
*movables
;
1344 register struct movable
*m
;
1345 char *matched_regs
= (char *) alloca (nregs
);
1346 enum machine_mode mode
;
1348 /* Regs that are set more than once are not allowed to match
1349 or be matched. I'm no longer sure why not. */
1350 /* Perhaps testing m->consec_sets would be more appropriate here? */
1352 for (m
= movables
; m
; m
= m
->next
)
1353 if (m
->match
== 0 && n_times_used
[m
->regno
] == 1 && !m
->partial
)
1355 register struct movable
*m1
;
1356 int regno
= m
->regno
;
1358 bzero (matched_regs
, nregs
);
1359 matched_regs
[regno
] = 1;
1361 /* We want later insns to match the first one. Don't make the first
1362 one match any later ones. So start this loop at m->next. */
1363 for (m1
= m
->next
; m1
; m1
= m1
->next
)
1364 if (m
!= m1
&& m1
->match
== 0 && n_times_used
[m1
->regno
] == 1
1365 /* A reg used outside the loop mustn't be eliminated. */
1367 /* A reg used for zero-extending mustn't be eliminated. */
1369 && (matched_regs
[m1
->regno
]
1372 /* Can combine regs with different modes loaded from the
1373 same constant only if the modes are the same or
1374 if both are integer modes with M wider or the same
1375 width as M1. The check for integer is redundant, but
1376 safe, since the only case of differing destination
1377 modes with equal sources is when both sources are
1378 VOIDmode, i.e., CONST_INT. */
1379 (GET_MODE (m
->set_dest
) == GET_MODE (m1
->set_dest
)
1380 || (GET_MODE_CLASS (GET_MODE (m
->set_dest
)) == MODE_INT
1381 && GET_MODE_CLASS (GET_MODE (m1
->set_dest
)) == MODE_INT
1382 && (GET_MODE_BITSIZE (GET_MODE (m
->set_dest
))
1383 >= GET_MODE_BITSIZE (GET_MODE (m1
->set_dest
)))))
1384 /* See if the source of M1 says it matches M. */
1385 && ((GET_CODE (m1
->set_src
) == REG
1386 && matched_regs
[REGNO (m1
->set_src
)])
1387 || rtx_equal_for_loop_p (m
->set_src
, m1
->set_src
,
1389 && ((m
->dependencies
== m1
->dependencies
)
1390 || rtx_equal_p (m
->dependencies
, m1
->dependencies
)))
1392 m
->lifetime
+= m1
->lifetime
;
1393 m
->savings
+= m1
->savings
;
1396 matched_regs
[m1
->regno
] = 1;
1400 /* Now combine the regs used for zero-extension.
1401 This can be done for those not marked `global'
1402 provided their lives don't overlap. */
1404 for (mode
= GET_CLASS_NARROWEST_MODE (MODE_INT
); mode
!= VOIDmode
;
1405 mode
= GET_MODE_WIDER_MODE (mode
))
1407 register struct movable
*m0
= 0;
1409 /* Combine all the registers for extension from mode MODE.
1410 Don't combine any that are used outside this loop. */
1411 for (m
= movables
; m
; m
= m
->next
)
1412 if (m
->partial
&& ! m
->global
1413 && mode
== GET_MODE (SET_SRC (PATTERN (NEXT_INSN (m
->insn
)))))
1415 register struct movable
*m1
;
1416 int first
= uid_luid
[REGNO_FIRST_UID (m
->regno
)];
1417 int last
= uid_luid
[REGNO_LAST_UID (m
->regno
)];
1421 /* First one: don't check for overlap, just record it. */
1426 /* Make sure they extend to the same mode.
1427 (Almost always true.) */
1428 if (GET_MODE (m
->set_dest
) != GET_MODE (m0
->set_dest
))
1431 /* We already have one: check for overlap with those
1432 already combined together. */
1433 for (m1
= movables
; m1
!= m
; m1
= m1
->next
)
1434 if (m1
== m0
|| (m1
->partial
&& m1
->match
== m0
))
1435 if (! (uid_luid
[REGNO_FIRST_UID (m1
->regno
)] > last
1436 || uid_luid
[REGNO_LAST_UID (m1
->regno
)] < first
))
1439 /* No overlap: we can combine this with the others. */
1440 m0
->lifetime
+= m
->lifetime
;
1441 m0
->savings
+= m
->savings
;
1450 /* Return 1 if regs X and Y will become the same if moved. */
1453 regs_match_p (x
, y
, movables
)
1455 struct movable
*movables
;
1459 struct movable
*mx
, *my
;
1461 for (mx
= movables
; mx
; mx
= mx
->next
)
1462 if (mx
->regno
== xn
)
1465 for (my
= movables
; my
; my
= my
->next
)
1466 if (my
->regno
== yn
)
1470 && ((mx
->match
== my
->match
&& mx
->match
!= 0)
1472 || mx
== my
->match
));
1475 /* Return 1 if X and Y are identical-looking rtx's.
1476 This is the Lisp function EQUAL for rtx arguments.
1478 If two registers are matching movables or a movable register and an
1479 equivalent constant, consider them equal. */
1482 rtx_equal_for_loop_p (x
, y
, movables
)
1484 struct movable
*movables
;
1488 register struct movable
*m
;
1489 register enum rtx_code code
;
1494 if (x
== 0 || y
== 0)
1497 code
= GET_CODE (x
);
1499 /* If we have a register and a constant, they may sometimes be
1501 if (GET_CODE (x
) == REG
&& n_times_set
[REGNO (x
)] == -2
1504 for (m
= movables
; m
; m
= m
->next
)
1505 if (m
->move_insn
&& m
->regno
== REGNO (x
)
1506 && rtx_equal_p (m
->set_src
, y
))
1509 else if (GET_CODE (y
) == REG
&& n_times_set
[REGNO (y
)] == -2
1512 for (m
= movables
; m
; m
= m
->next
)
1513 if (m
->move_insn
&& m
->regno
== REGNO (y
)
1514 && rtx_equal_p (m
->set_src
, x
))
1518 /* Otherwise, rtx's of different codes cannot be equal. */
1519 if (code
!= GET_CODE (y
))
1522 /* (MULT:SI x y) and (MULT:HI x y) are NOT equivalent.
1523 (REG:SI x) and (REG:HI x) are NOT equivalent. */
1525 if (GET_MODE (x
) != GET_MODE (y
))
1528 /* These three types of rtx's can be compared nonrecursively. */
1530 return (REGNO (x
) == REGNO (y
) || regs_match_p (x
, y
, movables
));
1532 if (code
== LABEL_REF
)
1533 return XEXP (x
, 0) == XEXP (y
, 0);
1534 if (code
== SYMBOL_REF
)
1535 return XSTR (x
, 0) == XSTR (y
, 0);
1537 /* Compare the elements. If any pair of corresponding elements
1538 fail to match, return 0 for the whole things. */
1540 fmt
= GET_RTX_FORMAT (code
);
1541 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
1546 if (XWINT (x
, i
) != XWINT (y
, i
))
1551 if (XINT (x
, i
) != XINT (y
, i
))
1556 /* Two vectors must have the same length. */
1557 if (XVECLEN (x
, i
) != XVECLEN (y
, i
))
1560 /* And the corresponding elements must match. */
1561 for (j
= 0; j
< XVECLEN (x
, i
); j
++)
1562 if (rtx_equal_for_loop_p (XVECEXP (x
, i
, j
), XVECEXP (y
, i
, j
), movables
) == 0)
1567 if (rtx_equal_for_loop_p (XEXP (x
, i
), XEXP (y
, i
), movables
) == 0)
1572 if (strcmp (XSTR (x
, i
), XSTR (y
, i
)))
1577 /* These are just backpointers, so they don't matter. */
1583 /* It is believed that rtx's at this level will never
1584 contain anything but integers and other rtx's,
1585 except for within LABEL_REFs and SYMBOL_REFs. */
1593 /* If X contains any LABEL_REF's, add REG_LABEL notes for them to all
1594 insns in INSNS which use thet reference. */
1597 add_label_notes (x
, insns
)
1601 enum rtx_code code
= GET_CODE (x
);
1606 if (code
== LABEL_REF
&& !LABEL_REF_NONLOCAL_P (x
))
1608 rtx next
= next_real_insn (XEXP (x
, 0));
1610 /* Don't record labels that refer to dispatch tables.
1611 This is not necessary, since the tablejump references the same label.
1612 And if we did record them, flow.c would make worse code. */
1614 || ! (GET_CODE (next
) == JUMP_INSN
1615 && (GET_CODE (PATTERN (next
)) == ADDR_VEC
1616 || GET_CODE (PATTERN (next
)) == ADDR_DIFF_VEC
)))
1618 for (insn
= insns
; insn
; insn
= NEXT_INSN (insn
))
1619 if (reg_mentioned_p (XEXP (x
, 0), insn
))
1620 REG_NOTES (insn
) = gen_rtx_EXPR_LIST (REG_LABEL
, XEXP (x
, 0),
1626 fmt
= GET_RTX_FORMAT (code
);
1627 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
1630 add_label_notes (XEXP (x
, i
), insns
);
1631 else if (fmt
[i
] == 'E')
1632 for (j
= XVECLEN (x
, i
) - 1; j
>= 0; j
--)
1633 add_label_notes (XVECEXP (x
, i
, j
), insns
);
1637 /* Scan MOVABLES, and move the insns that deserve to be moved.
1638 If two matching movables are combined, replace one reg with the
1639 other throughout. */
1642 move_movables (movables
, threshold
, insn_count
, loop_start
, end
, nregs
)
1643 struct movable
*movables
;
1651 register struct movable
*m
;
1653 /* Map of pseudo-register replacements to handle combining
1654 when we move several insns that load the same value
1655 into different pseudo-registers. */
1656 rtx
*reg_map
= (rtx
*) alloca (nregs
* sizeof (rtx
));
1657 char *already_moved
= (char *) alloca (nregs
);
1659 bzero (already_moved
, nregs
);
1660 bzero ((char *) reg_map
, nregs
* sizeof (rtx
));
1664 for (m
= movables
; m
; m
= m
->next
)
1666 /* Describe this movable insn. */
1668 if (loop_dump_stream
)
1670 fprintf (loop_dump_stream
, "Insn %d: regno %d (life %d), ",
1671 INSN_UID (m
->insn
), m
->regno
, m
->lifetime
);
1673 fprintf (loop_dump_stream
, "consec %d, ", m
->consec
);
1675 fprintf (loop_dump_stream
, "cond ");
1677 fprintf (loop_dump_stream
, "force ");
1679 fprintf (loop_dump_stream
, "global ");
1681 fprintf (loop_dump_stream
, "done ");
1683 fprintf (loop_dump_stream
, "move-insn ");
1685 fprintf (loop_dump_stream
, "matches %d ",
1686 INSN_UID (m
->match
->insn
));
1688 fprintf (loop_dump_stream
, "forces %d ",
1689 INSN_UID (m
->forces
->insn
));
1692 /* Count movables. Value used in heuristics in strength_reduce. */
1695 /* Ignore the insn if it's already done (it matched something else).
1696 Otherwise, see if it is now safe to move. */
1700 || (1 == invariant_p (m
->set_src
)
1701 && (m
->dependencies
== 0
1702 || 1 == invariant_p (m
->dependencies
))
1704 || 1 == consec_sets_invariant_p (m
->set_dest
,
1707 && (! m
->forces
|| m
->forces
->done
))
1711 int savings
= m
->savings
;
1713 /* We have an insn that is safe to move.
1714 Compute its desirability. */
1719 if (loop_dump_stream
)
1720 fprintf (loop_dump_stream
, "savings %d ", savings
);
1722 if (moved_once
[regno
])
1726 if (loop_dump_stream
)
1727 fprintf (loop_dump_stream
, "halved since already moved ");
1730 /* An insn MUST be moved if we already moved something else
1731 which is safe only if this one is moved too: that is,
1732 if already_moved[REGNO] is nonzero. */
1734 /* An insn is desirable to move if the new lifetime of the
1735 register is no more than THRESHOLD times the old lifetime.
1736 If it's not desirable, it means the loop is so big
1737 that moving won't speed things up much,
1738 and it is liable to make register usage worse. */
1740 /* It is also desirable to move if it can be moved at no
1741 extra cost because something else was already moved. */
1743 if (already_moved
[regno
]
1744 || flag_move_all_movables
1745 || (threshold
* savings
* m
->lifetime
) >= insn_count
1746 || (m
->forces
&& m
->forces
->done
1747 && n_times_used
[m
->forces
->regno
] == 1))
1750 register struct movable
*m1
;
1753 /* Now move the insns that set the reg. */
1755 if (m
->partial
&& m
->match
)
1759 /* Find the end of this chain of matching regs.
1760 Thus, we load each reg in the chain from that one reg.
1761 And that reg is loaded with 0 directly,
1762 since it has ->match == 0. */
1763 for (m1
= m
; m1
->match
; m1
= m1
->match
);
1764 newpat
= gen_move_insn (SET_DEST (PATTERN (m
->insn
)),
1765 SET_DEST (PATTERN (m1
->insn
)));
1766 i1
= emit_insn_before (newpat
, loop_start
);
1768 /* Mark the moved, invariant reg as being allowed to
1769 share a hard reg with the other matching invariant. */
1770 REG_NOTES (i1
) = REG_NOTES (m
->insn
);
1771 r1
= SET_DEST (PATTERN (m
->insn
));
1772 r2
= SET_DEST (PATTERN (m1
->insn
));
1774 = gen_rtx_EXPR_LIST (VOIDmode
, r1
,
1775 gen_rtx_EXPR_LIST (VOIDmode
, r2
,
1777 delete_insn (m
->insn
);
1782 if (loop_dump_stream
)
1783 fprintf (loop_dump_stream
, " moved to %d", INSN_UID (i1
));
1785 /* If we are to re-generate the item being moved with a
1786 new move insn, first delete what we have and then emit
1787 the move insn before the loop. */
1788 else if (m
->move_insn
)
1792 for (count
= m
->consec
; count
>= 0; count
--)
1794 /* If this is the first insn of a library call sequence,
1796 if (GET_CODE (p
) != NOTE
1797 && (temp
= find_reg_note (p
, REG_LIBCALL
, NULL_RTX
)))
1800 /* If this is the last insn of a libcall sequence, then
1801 delete every insn in the sequence except the last.
1802 The last insn is handled in the normal manner. */
1803 if (GET_CODE (p
) != NOTE
1804 && (temp
= find_reg_note (p
, REG_RETVAL
, NULL_RTX
)))
1806 temp
= XEXP (temp
, 0);
1808 temp
= delete_insn (temp
);
1811 p
= delete_insn (p
);
1812 while (p
&& GET_CODE (p
) == NOTE
)
1817 emit_move_insn (m
->set_dest
, m
->set_src
);
1818 temp
= get_insns ();
1821 add_label_notes (m
->set_src
, temp
);
1823 i1
= emit_insns_before (temp
, loop_start
);
1824 if (! find_reg_note (i1
, REG_EQUAL
, NULL_RTX
))
1826 = gen_rtx_EXPR_LIST (m
->is_equiv
? REG_EQUIV
: REG_EQUAL
,
1827 m
->set_src
, REG_NOTES (i1
));
1829 if (loop_dump_stream
)
1830 fprintf (loop_dump_stream
, " moved to %d", INSN_UID (i1
));
1832 /* The more regs we move, the less we like moving them. */
1837 for (count
= m
->consec
; count
>= 0; count
--)
1841 /* If first insn of libcall sequence, skip to end. */
1842 /* Do this at start of loop, since p is guaranteed to
1844 if (GET_CODE (p
) != NOTE
1845 && (temp
= find_reg_note (p
, REG_LIBCALL
, NULL_RTX
)))
1848 /* If last insn of libcall sequence, move all
1849 insns except the last before the loop. The last
1850 insn is handled in the normal manner. */
1851 if (GET_CODE (p
) != NOTE
1852 && (temp
= find_reg_note (p
, REG_RETVAL
, NULL_RTX
)))
1856 rtx fn_address_insn
= 0;
1859 for (temp
= XEXP (temp
, 0); temp
!= p
;
1860 temp
= NEXT_INSN (temp
))
1866 if (GET_CODE (temp
) == NOTE
)
1869 body
= PATTERN (temp
);
1871 /* Find the next insn after TEMP,
1872 not counting USE or NOTE insns. */
1873 for (next
= NEXT_INSN (temp
); next
!= p
;
1874 next
= NEXT_INSN (next
))
1875 if (! (GET_CODE (next
) == INSN
1876 && GET_CODE (PATTERN (next
)) == USE
)
1877 && GET_CODE (next
) != NOTE
)
1880 /* If that is the call, this may be the insn
1881 that loads the function address.
1883 Extract the function address from the insn
1884 that loads it into a register.
1885 If this insn was cse'd, we get incorrect code.
1887 So emit a new move insn that copies the
1888 function address into the register that the
1889 call insn will use. flow.c will delete any
1890 redundant stores that we have created. */
1891 if (GET_CODE (next
) == CALL_INSN
1892 && GET_CODE (body
) == SET
1893 && GET_CODE (SET_DEST (body
)) == REG
1894 && (n
= find_reg_note (temp
, REG_EQUAL
,
1897 fn_reg
= SET_SRC (body
);
1898 if (GET_CODE (fn_reg
) != REG
)
1899 fn_reg
= SET_DEST (body
);
1900 fn_address
= XEXP (n
, 0);
1901 fn_address_insn
= temp
;
1903 /* We have the call insn.
1904 If it uses the register we suspect it might,
1905 load it with the correct address directly. */
1906 if (GET_CODE (temp
) == CALL_INSN
1908 && reg_referenced_p (fn_reg
, body
))
1909 emit_insn_after (gen_move_insn (fn_reg
,
1913 if (GET_CODE (temp
) == CALL_INSN
)
1915 i1
= emit_call_insn_before (body
, loop_start
);
1916 /* Because the USAGE information potentially
1917 contains objects other than hard registers
1918 we need to copy it. */
1919 if (CALL_INSN_FUNCTION_USAGE (temp
))
1920 CALL_INSN_FUNCTION_USAGE (i1
)
1921 = copy_rtx (CALL_INSN_FUNCTION_USAGE (temp
));
1924 i1
= emit_insn_before (body
, loop_start
);
1927 if (temp
== fn_address_insn
)
1928 fn_address_insn
= i1
;
1929 REG_NOTES (i1
) = REG_NOTES (temp
);
1933 if (m
->savemode
!= VOIDmode
)
1935 /* P sets REG to zero; but we should clear only
1936 the bits that are not covered by the mode
1938 rtx reg
= m
->set_dest
;
1944 (GET_MODE (reg
), and_optab
, reg
,
1945 GEN_INT ((((HOST_WIDE_INT
) 1
1946 << GET_MODE_BITSIZE (m
->savemode
)))
1948 reg
, 1, OPTAB_LIB_WIDEN
);
1952 emit_move_insn (reg
, tem
);
1953 sequence
= gen_sequence ();
1955 i1
= emit_insn_before (sequence
, loop_start
);
1957 else if (GET_CODE (p
) == CALL_INSN
)
1959 i1
= emit_call_insn_before (PATTERN (p
), loop_start
);
1960 /* Because the USAGE information potentially
1961 contains objects other than hard registers
1962 we need to copy it. */
1963 if (CALL_INSN_FUNCTION_USAGE (p
))
1964 CALL_INSN_FUNCTION_USAGE (i1
)
1965 = copy_rtx (CALL_INSN_FUNCTION_USAGE (p
));
1967 else if (count
== m
->consec
&& m
->move_insn_first
)
1969 /* The SET_SRC might not be invariant, so we must
1970 use the REG_EQUAL note. */
1972 emit_move_insn (m
->set_dest
, m
->set_src
);
1973 temp
= get_insns ();
1976 add_label_notes (m
->set_src
, temp
);
1978 i1
= emit_insns_before (temp
, loop_start
);
1979 if (! find_reg_note (i1
, REG_EQUAL
, NULL_RTX
))
1981 = gen_rtx_EXPR_LIST ((m
->is_equiv
? REG_EQUIV
1983 m
->set_src
, REG_NOTES (i1
));
1986 i1
= emit_insn_before (PATTERN (p
), loop_start
);
1988 if (REG_NOTES (i1
) == 0)
1990 REG_NOTES (i1
) = REG_NOTES (p
);
1992 /* If there is a REG_EQUAL note present whose value
1993 is not loop invariant, then delete it, since it
1994 may cause problems with later optimization passes.
1995 It is possible for cse to create such notes
1996 like this as a result of record_jump_cond. */
1998 if ((temp
= find_reg_note (i1
, REG_EQUAL
, NULL_RTX
))
1999 && ! invariant_p (XEXP (temp
, 0)))
2000 remove_note (i1
, temp
);
2006 if (loop_dump_stream
)
2007 fprintf (loop_dump_stream
, " moved to %d",
2010 /* If library call, now fix the REG_NOTES that contain
2011 insn pointers, namely REG_LIBCALL on FIRST
2012 and REG_RETVAL on I1. */
2013 if ((temp
= find_reg_note (i1
, REG_RETVAL
, NULL_RTX
)))
2015 XEXP (temp
, 0) = first
;
2016 temp
= find_reg_note (first
, REG_LIBCALL
, NULL_RTX
);
2017 XEXP (temp
, 0) = i1
;
2021 do p
= NEXT_INSN (p
);
2022 while (p
&& GET_CODE (p
) == NOTE
);
2025 /* The more regs we move, the less we like moving them. */
2029 /* Any other movable that loads the same register
2031 already_moved
[regno
] = 1;
2033 /* This reg has been moved out of one loop. */
2034 moved_once
[regno
] = 1;
2036 /* The reg set here is now invariant. */
2038 n_times_set
[regno
] = 0;
2042 /* Change the length-of-life info for the register
2043 to say it lives at least the full length of this loop.
2044 This will help guide optimizations in outer loops. */
2046 if (uid_luid
[REGNO_FIRST_UID (regno
)] > INSN_LUID (loop_start
))
2047 /* This is the old insn before all the moved insns.
2048 We can't use the moved insn because it is out of range
2049 in uid_luid. Only the old insns have luids. */
2050 REGNO_FIRST_UID (regno
) = INSN_UID (loop_start
);
2051 if (uid_luid
[REGNO_LAST_UID (regno
)] < INSN_LUID (end
))
2052 REGNO_LAST_UID (regno
) = INSN_UID (end
);
2054 /* Combine with this moved insn any other matching movables. */
2057 for (m1
= movables
; m1
; m1
= m1
->next
)
2062 /* Schedule the reg loaded by M1
2063 for replacement so that shares the reg of M.
2064 If the modes differ (only possible in restricted
2065 circumstances, make a SUBREG. */
2066 if (GET_MODE (m
->set_dest
) == GET_MODE (m1
->set_dest
))
2067 reg_map
[m1
->regno
] = m
->set_dest
;
2070 = gen_lowpart_common (GET_MODE (m1
->set_dest
),
2073 /* Get rid of the matching insn
2074 and prevent further processing of it. */
2077 /* if library call, delete all insn except last, which
2079 if ((temp
= find_reg_note (m1
->insn
, REG_RETVAL
,
2082 for (temp
= XEXP (temp
, 0); temp
!= m1
->insn
;
2083 temp
= NEXT_INSN (temp
))
2086 delete_insn (m1
->insn
);
2088 /* Any other movable that loads the same register
2090 already_moved
[m1
->regno
] = 1;
2092 /* The reg merged here is now invariant,
2093 if the reg it matches is invariant. */
2095 n_times_set
[m1
->regno
] = 0;
2098 else if (loop_dump_stream
)
2099 fprintf (loop_dump_stream
, "not desirable");
2101 else if (loop_dump_stream
&& !m
->match
)
2102 fprintf (loop_dump_stream
, "not safe");
2104 if (loop_dump_stream
)
2105 fprintf (loop_dump_stream
, "\n");
2109 new_start
= loop_start
;
2111 /* Go through all the instructions in the loop, making
2112 all the register substitutions scheduled in REG_MAP. */
2113 for (p
= new_start
; p
!= end
; p
= NEXT_INSN (p
))
2114 if (GET_CODE (p
) == INSN
|| GET_CODE (p
) == JUMP_INSN
2115 || GET_CODE (p
) == CALL_INSN
)
2117 replace_regs (PATTERN (p
), reg_map
, nregs
, 0);
2118 replace_regs (REG_NOTES (p
), reg_map
, nregs
, 0);
2124 /* Scan X and replace the address of any MEM in it with ADDR.
2125 REG is the address that MEM should have before the replacement. */
2128 replace_call_address (x
, reg
, addr
)
2131 register enum rtx_code code
;
2137 code
= GET_CODE (x
);
2151 /* Short cut for very common case. */
2152 replace_call_address (XEXP (x
, 1), reg
, addr
);
2156 /* Short cut for very common case. */
2157 replace_call_address (XEXP (x
, 0), reg
, addr
);
2161 /* If this MEM uses a reg other than the one we expected,
2162 something is wrong. */
2163 if (XEXP (x
, 0) != reg
)
2172 fmt
= GET_RTX_FORMAT (code
);
2173 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
2176 replace_call_address (XEXP (x
, i
), reg
, addr
);
2180 for (j
= 0; j
< XVECLEN (x
, i
); j
++)
2181 replace_call_address (XVECEXP (x
, i
, j
), reg
, addr
);
2187 /* Return the number of memory refs to addresses that vary
2191 count_nonfixed_reads (x
)
2194 register enum rtx_code code
;
2202 code
= GET_CODE (x
);
2216 return ((invariant_p (XEXP (x
, 0)) != 1)
2217 + count_nonfixed_reads (XEXP (x
, 0)));
2224 fmt
= GET_RTX_FORMAT (code
);
2225 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
2228 value
+= count_nonfixed_reads (XEXP (x
, i
));
2232 for (j
= 0; j
< XVECLEN (x
, i
); j
++)
2233 value
+= count_nonfixed_reads (XVECEXP (x
, i
, j
));
2241 /* P is an instruction that sets a register to the result of a ZERO_EXTEND.
2242 Replace it with an instruction to load just the low bytes
2243 if the machine supports such an instruction,
2244 and insert above LOOP_START an instruction to clear the register. */
2247 constant_high_bytes (p
, loop_start
)
2251 register int insn_code_number
;
2253 /* Try to change (SET (REG ...) (ZERO_EXTEND (..:B ...)))
2254 to (SET (STRICT_LOW_PART (SUBREG:B (REG...))) ...). */
2256 new = gen_rtx_SET (VOIDmode
,
2257 gen_rtx_STRICT_LOW_PART (VOIDmode
,
2258 gen_rtx_SUBREG (GET_MODE (XEXP (SET_SRC (PATTERN (p
)), 0)),
2259 SET_DEST (PATTERN (p
)),
2261 XEXP (SET_SRC (PATTERN (p
)), 0));
2262 insn_code_number
= recog (new, p
);
2264 if (insn_code_number
)
2268 /* Clear destination register before the loop. */
2269 emit_insn_before (gen_rtx_SET (VOIDmode
, SET_DEST (PATTERN (p
)),
2273 /* Inside the loop, just load the low part. */
2279 /* Scan a loop setting the variables `unknown_address_altered',
2280 `num_mem_sets', `loop_continue', loops_enclosed', `loop_has_call',
2281 and `loop_has_volatile'.
2282 Also, fill in the array `loop_store_mems'. */
2285 prescan_loop (start
, end
)
2288 register int level
= 1;
2291 unknown_address_altered
= 0;
2293 loop_has_volatile
= 0;
2294 loop_store_mems_idx
= 0;
2300 for (insn
= NEXT_INSN (start
); insn
!= NEXT_INSN (end
);
2301 insn
= NEXT_INSN (insn
))
2303 if (GET_CODE (insn
) == NOTE
)
2305 if (NOTE_LINE_NUMBER (insn
) == NOTE_INSN_LOOP_BEG
)
2308 /* Count number of loops contained in this one. */
2311 else if (NOTE_LINE_NUMBER (insn
) == NOTE_INSN_LOOP_END
)
2320 else if (NOTE_LINE_NUMBER (insn
) == NOTE_INSN_LOOP_CONT
)
2323 loop_continue
= insn
;
2326 else if (GET_CODE (insn
) == CALL_INSN
)
2328 if (! CONST_CALL_P (insn
))
2329 unknown_address_altered
= 1;
2334 if (GET_CODE (insn
) == INSN
|| GET_CODE (insn
) == JUMP_INSN
)
2336 if (volatile_refs_p (PATTERN (insn
)))
2337 loop_has_volatile
= 1;
2339 note_stores (PATTERN (insn
), note_addr_stored
);
2345 /* Scan the function looking for loops. Record the start and end of each loop.
2346 Also mark as invalid loops any loops that contain a setjmp or are branched
2347 to from outside the loop. */
2350 find_and_verify_loops (f
)
2354 int current_loop
= -1;
2358 /* If there are jumps to undefined labels,
2359 treat them as jumps out of any/all loops.
2360 This also avoids writing past end of tables when there are no loops. */
2361 uid_loop_num
[0] = -1;
2363 /* Find boundaries of loops, mark which loops are contained within
2364 loops, and invalidate loops that have setjmp. */
2366 for (insn
= f
; insn
; insn
= NEXT_INSN (insn
))
2368 if (GET_CODE (insn
) == NOTE
)
2369 switch (NOTE_LINE_NUMBER (insn
))
2371 case NOTE_INSN_LOOP_BEG
:
2372 loop_number_loop_starts
[++next_loop
] = insn
;
2373 loop_number_loop_ends
[next_loop
] = 0;
2374 loop_outer_loop
[next_loop
] = current_loop
;
2375 loop_invalid
[next_loop
] = 0;
2376 loop_number_exit_labels
[next_loop
] = 0;
2377 loop_number_exit_count
[next_loop
] = 0;
2378 current_loop
= next_loop
;
2381 case NOTE_INSN_SETJMP
:
2382 /* In this case, we must invalidate our current loop and any
2384 for (loop
= current_loop
; loop
!= -1; loop
= loop_outer_loop
[loop
])
2386 loop_invalid
[loop
] = 1;
2387 if (loop_dump_stream
)
2388 fprintf (loop_dump_stream
,
2389 "\nLoop at %d ignored due to setjmp.\n",
2390 INSN_UID (loop_number_loop_starts
[loop
]));
2394 case NOTE_INSN_LOOP_END
:
2395 if (current_loop
== -1)
2398 loop_number_loop_ends
[current_loop
] = insn
;
2399 current_loop
= loop_outer_loop
[current_loop
];
2406 /* Note that this will mark the NOTE_INSN_LOOP_END note as being in the
2407 enclosing loop, but this doesn't matter. */
2408 uid_loop_num
[INSN_UID (insn
)] = current_loop
;
2411 /* Any loop containing a label used in an initializer must be invalidated,
2412 because it can be jumped into from anywhere. */
2414 for (label
= forced_labels
; label
; label
= XEXP (label
, 1))
2418 for (loop_num
= uid_loop_num
[INSN_UID (XEXP (label
, 0))];
2420 loop_num
= loop_outer_loop
[loop_num
])
2421 loop_invalid
[loop_num
] = 1;
2424 /* Any loop containing a label used for an exception handler must be
2425 invalidated, because it can be jumped into from anywhere. */
2427 for (label
= exception_handler_labels
; label
; label
= XEXP (label
, 1))
2431 for (loop_num
= uid_loop_num
[INSN_UID (XEXP (label
, 0))];
2433 loop_num
= loop_outer_loop
[loop_num
])
2434 loop_invalid
[loop_num
] = 1;
2437 /* Now scan all insn's in the function. If any JUMP_INSN branches into a
2438 loop that it is not contained within, that loop is marked invalid.
2439 If any INSN or CALL_INSN uses a label's address, then the loop containing
2440 that label is marked invalid, because it could be jumped into from
2443 Also look for blocks of code ending in an unconditional branch that
2444 exits the loop. If such a block is surrounded by a conditional
2445 branch around the block, move the block elsewhere (see below) and
2446 invert the jump to point to the code block. This may eliminate a
2447 label in our loop and will simplify processing by both us and a
2448 possible second cse pass. */
2450 for (insn
= f
; insn
; insn
= NEXT_INSN (insn
))
2451 if (GET_RTX_CLASS (GET_CODE (insn
)) == 'i')
2453 int this_loop_num
= uid_loop_num
[INSN_UID (insn
)];
2455 if (GET_CODE (insn
) == INSN
|| GET_CODE (insn
) == CALL_INSN
)
2457 rtx note
= find_reg_note (insn
, REG_LABEL
, NULL_RTX
);
2462 for (loop_num
= uid_loop_num
[INSN_UID (XEXP (note
, 0))];
2464 loop_num
= loop_outer_loop
[loop_num
])
2465 loop_invalid
[loop_num
] = 1;
2469 if (GET_CODE (insn
) != JUMP_INSN
)
2472 mark_loop_jump (PATTERN (insn
), this_loop_num
);
2474 /* See if this is an unconditional branch outside the loop. */
2475 if (this_loop_num
!= -1
2476 && (GET_CODE (PATTERN (insn
)) == RETURN
2477 || (simplejump_p (insn
)
2478 && (uid_loop_num
[INSN_UID (JUMP_LABEL (insn
))]
2480 && get_max_uid () < max_uid_for_loop
)
2483 rtx our_next
= next_real_insn (insn
);
2485 int outer_loop
= -1;
2487 /* Go backwards until we reach the start of the loop, a label,
2489 for (p
= PREV_INSN (insn
);
2490 GET_CODE (p
) != CODE_LABEL
2491 && ! (GET_CODE (p
) == NOTE
2492 && NOTE_LINE_NUMBER (p
) == NOTE_INSN_LOOP_BEG
)
2493 && GET_CODE (p
) != JUMP_INSN
;
2497 /* Check for the case where we have a jump to an inner nested
2498 loop, and do not perform the optimization in that case. */
2500 if (JUMP_LABEL (insn
))
2502 dest_loop
= uid_loop_num
[INSN_UID (JUMP_LABEL (insn
))];
2503 if (dest_loop
!= -1)
2505 for (outer_loop
= dest_loop
; outer_loop
!= -1;
2506 outer_loop
= loop_outer_loop
[outer_loop
])
2507 if (outer_loop
== this_loop_num
)
2512 /* Make sure that the target of P is within the current loop. */
2514 if (GET_CODE (p
) == JUMP_INSN
&& JUMP_LABEL (p
)
2515 && uid_loop_num
[INSN_UID (JUMP_LABEL (p
))] != this_loop_num
)
2516 outer_loop
= this_loop_num
;
2518 /* If we stopped on a JUMP_INSN to the next insn after INSN,
2519 we have a block of code to try to move.
2521 We look backward and then forward from the target of INSN
2522 to find a BARRIER at the same loop depth as the target.
2523 If we find such a BARRIER, we make a new label for the start
2524 of the block, invert the jump in P and point it to that label,
2525 and move the block of code to the spot we found. */
2527 if (outer_loop
== -1
2528 && GET_CODE (p
) == JUMP_INSN
2529 && JUMP_LABEL (p
) != 0
2530 /* Just ignore jumps to labels that were never emitted.
2531 These always indicate compilation errors. */
2532 && INSN_UID (JUMP_LABEL (p
)) != 0
2534 && ! simplejump_p (p
)
2535 && next_real_insn (JUMP_LABEL (p
)) == our_next
)
2538 = JUMP_LABEL (insn
) ? JUMP_LABEL (insn
) : get_last_insn ();
2539 int target_loop_num
= uid_loop_num
[INSN_UID (target
)];
2542 for (loc
= target
; loc
; loc
= PREV_INSN (loc
))
2543 if (GET_CODE (loc
) == BARRIER
2544 && uid_loop_num
[INSN_UID (loc
)] == target_loop_num
)
2548 for (loc
= target
; loc
; loc
= NEXT_INSN (loc
))
2549 if (GET_CODE (loc
) == BARRIER
2550 && uid_loop_num
[INSN_UID (loc
)] == target_loop_num
)
2555 rtx cond_label
= JUMP_LABEL (p
);
2556 rtx new_label
= get_label_after (p
);
2558 /* Ensure our label doesn't go away. */
2559 LABEL_NUSES (cond_label
)++;
2561 /* Verify that uid_loop_num is large enough and that
2563 if (invert_jump (p
, new_label
))
2567 /* If no suitable BARRIER was found, create a suitable
2568 one before TARGET. Since TARGET is a fall through
2569 path, we'll need to insert an jump around our block
2570 and a add a BARRIER before TARGET.
2572 This creates an extra unconditional jump outside
2573 the loop. However, the benefits of removing rarely
2574 executed instructions from inside the loop usually
2575 outweighs the cost of the extra unconditional jump
2576 outside the loop. */
2581 temp
= gen_jump (JUMP_LABEL (insn
));
2582 temp
= emit_jump_insn_before (temp
, target
);
2583 JUMP_LABEL (temp
) = JUMP_LABEL (insn
);
2584 LABEL_NUSES (JUMP_LABEL (insn
))++;
2585 loc
= emit_barrier_before (target
);
2588 /* Include the BARRIER after INSN and copy the
2590 new_label
= squeeze_notes (new_label
, NEXT_INSN (insn
));
2591 reorder_insns (new_label
, NEXT_INSN (insn
), loc
);
2593 /* All those insns are now in TARGET_LOOP_NUM. */
2594 for (q
= new_label
; q
!= NEXT_INSN (NEXT_INSN (insn
));
2596 uid_loop_num
[INSN_UID (q
)] = target_loop_num
;
2598 /* The label jumped to by INSN is no longer a loop exit.
2599 Unless INSN does not have a label (e.g., it is a
2600 RETURN insn), search loop_number_exit_labels to find
2601 its label_ref, and remove it. Also turn off
2602 LABEL_OUTSIDE_LOOP_P bit. */
2603 if (JUMP_LABEL (insn
))
2608 r
= loop_number_exit_labels
[this_loop_num
];
2609 r
; q
= r
, r
= LABEL_NEXTREF (r
))
2610 if (XEXP (r
, 0) == JUMP_LABEL (insn
))
2612 LABEL_OUTSIDE_LOOP_P (r
) = 0;
2614 LABEL_NEXTREF (q
) = LABEL_NEXTREF (r
);
2616 loop_number_exit_labels
[this_loop_num
]
2617 = LABEL_NEXTREF (r
);
2621 for (loop_num
= this_loop_num
;
2622 loop_num
!= -1 && loop_num
!= target_loop_num
;
2623 loop_num
= loop_outer_loop
[loop_num
])
2624 loop_number_exit_count
[loop_num
]--;
2626 /* If we didn't find it, then something is wrong. */
2631 /* P is now a jump outside the loop, so it must be put
2632 in loop_number_exit_labels, and marked as such.
2633 The easiest way to do this is to just call
2634 mark_loop_jump again for P. */
2635 mark_loop_jump (PATTERN (p
), this_loop_num
);
2637 /* If INSN now jumps to the insn after it,
2639 if (JUMP_LABEL (insn
) != 0
2640 && (next_real_insn (JUMP_LABEL (insn
))
2641 == next_real_insn (insn
)))
2645 /* Continue the loop after where the conditional
2646 branch used to jump, since the only branch insn
2647 in the block (if it still remains) is an inter-loop
2648 branch and hence needs no processing. */
2649 insn
= NEXT_INSN (cond_label
);
2651 if (--LABEL_NUSES (cond_label
) == 0)
2652 delete_insn (cond_label
);
2654 /* This loop will be continued with NEXT_INSN (insn). */
2655 insn
= PREV_INSN (insn
);
2662 /* If any label in X jumps to a loop different from LOOP_NUM and any of the
2663 loops it is contained in, mark the target loop invalid.
2665 For speed, we assume that X is part of a pattern of a JUMP_INSN. */
2668 mark_loop_jump (x
, loop_num
)
2676 switch (GET_CODE (x
))
2689 /* There could be a label reference in here. */
2690 mark_loop_jump (XEXP (x
, 0), loop_num
);
2696 mark_loop_jump (XEXP (x
, 0), loop_num
);
2697 mark_loop_jump (XEXP (x
, 1), loop_num
);
2702 mark_loop_jump (XEXP (x
, 0), loop_num
);
2706 dest_loop
= uid_loop_num
[INSN_UID (XEXP (x
, 0))];
2708 /* Link together all labels that branch outside the loop. This
2709 is used by final_[bg]iv_value and the loop unrolling code. Also
2710 mark this LABEL_REF so we know that this branch should predict
2713 /* A check to make sure the label is not in an inner nested loop,
2714 since this does not count as a loop exit. */
2715 if (dest_loop
!= -1)
2717 for (outer_loop
= dest_loop
; outer_loop
!= -1;
2718 outer_loop
= loop_outer_loop
[outer_loop
])
2719 if (outer_loop
== loop_num
)
2725 if (loop_num
!= -1 && outer_loop
== -1)
2727 LABEL_OUTSIDE_LOOP_P (x
) = 1;
2728 LABEL_NEXTREF (x
) = loop_number_exit_labels
[loop_num
];
2729 loop_number_exit_labels
[loop_num
] = x
;
2731 for (outer_loop
= loop_num
;
2732 outer_loop
!= -1 && outer_loop
!= dest_loop
;
2733 outer_loop
= loop_outer_loop
[outer_loop
])
2734 loop_number_exit_count
[outer_loop
]++;
2737 /* If this is inside a loop, but not in the current loop or one enclosed
2738 by it, it invalidates at least one loop. */
2740 if (dest_loop
== -1)
2743 /* We must invalidate every nested loop containing the target of this
2744 label, except those that also contain the jump insn. */
2746 for (; dest_loop
!= -1; dest_loop
= loop_outer_loop
[dest_loop
])
2748 /* Stop when we reach a loop that also contains the jump insn. */
2749 for (outer_loop
= loop_num
; outer_loop
!= -1;
2750 outer_loop
= loop_outer_loop
[outer_loop
])
2751 if (dest_loop
== outer_loop
)
2754 /* If we get here, we know we need to invalidate a loop. */
2755 if (loop_dump_stream
&& ! loop_invalid
[dest_loop
])
2756 fprintf (loop_dump_stream
,
2757 "\nLoop at %d ignored due to multiple entry points.\n",
2758 INSN_UID (loop_number_loop_starts
[dest_loop
]));
2760 loop_invalid
[dest_loop
] = 1;
2765 /* If this is not setting pc, ignore. */
2766 if (SET_DEST (x
) == pc_rtx
)
2767 mark_loop_jump (SET_SRC (x
), loop_num
);
2771 mark_loop_jump (XEXP (x
, 1), loop_num
);
2772 mark_loop_jump (XEXP (x
, 2), loop_num
);
2777 for (i
= 0; i
< XVECLEN (x
, 0); i
++)
2778 mark_loop_jump (XVECEXP (x
, 0, i
), loop_num
);
2782 for (i
= 0; i
< XVECLEN (x
, 1); i
++)
2783 mark_loop_jump (XVECEXP (x
, 1, i
), loop_num
);
2787 /* Treat anything else (such as a symbol_ref)
2788 as a branch out of this loop, but not into any loop. */
2793 LABEL_OUTSIDE_LOOP_P (x
) = 1;
2794 LABEL_NEXTREF (x
) = loop_number_exit_labels
[loop_num
];
2797 loop_number_exit_labels
[loop_num
] = x
;
2799 for (outer_loop
= loop_num
; outer_loop
!= -1;
2800 outer_loop
= loop_outer_loop
[outer_loop
])
2801 loop_number_exit_count
[outer_loop
]++;
2807 /* Return nonzero if there is a label in the range from
2808 insn INSN to and including the insn whose luid is END
2809 INSN must have an assigned luid (i.e., it must not have
2810 been previously created by loop.c). */
2813 labels_in_range_p (insn
, end
)
2817 while (insn
&& INSN_LUID (insn
) <= end
)
2819 if (GET_CODE (insn
) == CODE_LABEL
)
2821 insn
= NEXT_INSN (insn
);
2827 /* Record that a memory reference X is being set. */
2830 note_addr_stored (x
, y
)
2832 rtx y ATTRIBUTE_UNUSED
;
2836 if (x
== 0 || GET_CODE (x
) != MEM
)
2839 /* Count number of memory writes.
2840 This affects heuristics in strength_reduce. */
2843 /* BLKmode MEM means all memory is clobbered. */
2844 if (GET_MODE (x
) == BLKmode
)
2845 unknown_address_altered
= 1;
2847 if (unknown_address_altered
)
2850 for (i
= 0; i
< loop_store_mems_idx
; i
++)
2851 if (rtx_equal_p (XEXP (loop_store_mems
[i
], 0), XEXP (x
, 0))
2852 && MEM_IN_STRUCT_P (x
) == MEM_IN_STRUCT_P (loop_store_mems
[i
]))
2854 /* We are storing at the same address as previously noted. Save the
2856 if (GET_MODE_SIZE (GET_MODE (x
))
2857 > GET_MODE_SIZE (GET_MODE (loop_store_mems
[i
])))
2858 loop_store_mems
[i
] = x
;
2862 if (i
== NUM_STORES
)
2863 unknown_address_altered
= 1;
2865 else if (i
== loop_store_mems_idx
)
2866 loop_store_mems
[loop_store_mems_idx
++] = x
;
2869 /* Return nonzero if the rtx X is invariant over the current loop.
2871 The value is 2 if we refer to something only conditionally invariant.
2873 If `unknown_address_altered' is nonzero, no memory ref is invariant.
2874 Otherwise, a memory ref is invariant if it does not conflict with
2875 anything stored in `loop_store_mems'. */
2882 register enum rtx_code code
;
2884 int conditional
= 0;
2888 code
= GET_CODE (x
);
2898 /* A LABEL_REF is normally invariant, however, if we are unrolling
2899 loops, and this label is inside the loop, then it isn't invariant.
2900 This is because each unrolled copy of the loop body will have
2901 a copy of this label. If this was invariant, then an insn loading
2902 the address of this label into a register might get moved outside
2903 the loop, and then each loop body would end up using the same label.
2905 We don't know the loop bounds here though, so just fail for all
2907 if (flag_unroll_loops
)
2914 case UNSPEC_VOLATILE
:
2918 /* We used to check RTX_UNCHANGING_P (x) here, but that is invalid
2919 since the reg might be set by initialization within the loop. */
2921 if ((x
== frame_pointer_rtx
|| x
== hard_frame_pointer_rtx
2922 || x
== arg_pointer_rtx
)
2923 && ! current_function_has_nonlocal_goto
)
2927 && REGNO (x
) < FIRST_PSEUDO_REGISTER
&& call_used_regs
[REGNO (x
)])
2930 if (n_times_set
[REGNO (x
)] < 0)
2933 return n_times_set
[REGNO (x
)] == 0;
2936 /* Volatile memory references must be rejected. Do this before
2937 checking for read-only items, so that volatile read-only items
2938 will be rejected also. */
2939 if (MEM_VOLATILE_P (x
))
2942 /* Read-only items (such as constants in a constant pool) are
2943 invariant if their address is. */
2944 if (RTX_UNCHANGING_P (x
))
2947 /* If we filled the table (or had a subroutine call), any location
2948 in memory could have been clobbered. */
2949 if (unknown_address_altered
)
2952 /* See if there is any dependence between a store and this load. */
2953 for (i
= loop_store_mems_idx
- 1; i
>= 0; i
--)
2954 if (true_dependence (loop_store_mems
[i
], VOIDmode
, x
, rtx_varies_p
))
2957 /* It's not invalidated by a store in memory
2958 but we must still verify the address is invariant. */
2962 /* Don't mess with insns declared volatile. */
2963 if (MEM_VOLATILE_P (x
))
2971 fmt
= GET_RTX_FORMAT (code
);
2972 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
2976 int tem
= invariant_p (XEXP (x
, i
));
2982 else if (fmt
[i
] == 'E')
2985 for (j
= 0; j
< XVECLEN (x
, i
); j
++)
2987 int tem
= invariant_p (XVECEXP (x
, i
, j
));
2997 return 1 + conditional
;
3001 /* Return nonzero if all the insns in the loop that set REG
3002 are INSN and the immediately following insns,
3003 and if each of those insns sets REG in an invariant way
3004 (not counting uses of REG in them).
3006 The value is 2 if some of these insns are only conditionally invariant.
3008 We assume that INSN itself is the first set of REG
3009 and that its source is invariant. */
3012 consec_sets_invariant_p (reg
, n_sets
, insn
)
3016 register rtx p
= insn
;
3017 register int regno
= REGNO (reg
);
3019 /* Number of sets we have to insist on finding after INSN. */
3020 int count
= n_sets
- 1;
3021 int old
= n_times_set
[regno
];
3025 /* If N_SETS hit the limit, we can't rely on its value. */
3029 n_times_set
[regno
] = 0;
3033 register enum rtx_code code
;
3037 code
= GET_CODE (p
);
3039 /* If library call, skip to end of of it. */
3040 if (code
== INSN
&& (temp
= find_reg_note (p
, REG_LIBCALL
, NULL_RTX
)))
3045 && (set
= single_set (p
))
3046 && GET_CODE (SET_DEST (set
)) == REG
3047 && REGNO (SET_DEST (set
)) == regno
)
3049 this = invariant_p (SET_SRC (set
));
3052 else if ((temp
= find_reg_note (p
, REG_EQUAL
, NULL_RTX
)))
3054 /* If this is a libcall, then any invariant REG_EQUAL note is OK.
3055 If this is an ordinary insn, then only CONSTANT_P REG_EQUAL
3057 this = (CONSTANT_P (XEXP (temp
, 0))
3058 || (find_reg_note (p
, REG_RETVAL
, NULL_RTX
)
3059 && invariant_p (XEXP (temp
, 0))));
3066 else if (code
!= NOTE
)
3068 n_times_set
[regno
] = old
;
3073 n_times_set
[regno
] = old
;
3074 /* If invariant_p ever returned 2, we return 2. */
3075 return 1 + (value
& 2);
3079 /* I don't think this condition is sufficient to allow INSN
3080 to be moved, so we no longer test it. */
3082 /* Return 1 if all insns in the basic block of INSN and following INSN
3083 that set REG are invariant according to TABLE. */
3086 all_sets_invariant_p (reg
, insn
, table
)
3090 register rtx p
= insn
;
3091 register int regno
= REGNO (reg
);
3095 register enum rtx_code code
;
3097 code
= GET_CODE (p
);
3098 if (code
== CODE_LABEL
|| code
== JUMP_INSN
)
3100 if (code
== INSN
&& GET_CODE (PATTERN (p
)) == SET
3101 && GET_CODE (SET_DEST (PATTERN (p
))) == REG
3102 && REGNO (SET_DEST (PATTERN (p
))) == regno
)
3104 if (!invariant_p (SET_SRC (PATTERN (p
)), table
))
3111 /* Look at all uses (not sets) of registers in X. For each, if it is
3112 the single use, set USAGE[REGNO] to INSN; if there was a previous use in
3113 a different insn, set USAGE[REGNO] to const0_rtx. */
3116 find_single_use_in_loop (insn
, x
, usage
)
3121 enum rtx_code code
= GET_CODE (x
);
3122 char *fmt
= GET_RTX_FORMAT (code
);
3127 = (usage
[REGNO (x
)] != 0 && usage
[REGNO (x
)] != insn
)
3128 ? const0_rtx
: insn
;
3130 else if (code
== SET
)
3132 /* Don't count SET_DEST if it is a REG; otherwise count things
3133 in SET_DEST because if a register is partially modified, it won't
3134 show up as a potential movable so we don't care how USAGE is set
3136 if (GET_CODE (SET_DEST (x
)) != REG
)
3137 find_single_use_in_loop (insn
, SET_DEST (x
), usage
);
3138 find_single_use_in_loop (insn
, SET_SRC (x
), usage
);
3141 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
3143 if (fmt
[i
] == 'e' && XEXP (x
, i
) != 0)
3144 find_single_use_in_loop (insn
, XEXP (x
, i
), usage
);
3145 else if (fmt
[i
] == 'E')
3146 for (j
= XVECLEN (x
, i
) - 1; j
>= 0; j
--)
3147 find_single_use_in_loop (insn
, XVECEXP (x
, i
, j
), usage
);
3151 /* Increment N_TIMES_SET at the index of each register
3152 that is modified by an insn between FROM and TO.
3153 If the value of an element of N_TIMES_SET becomes 127 or more,
3154 stop incrementing it, to avoid overflow.
3156 Store in SINGLE_USAGE[I] the single insn in which register I is
3157 used, if it is only used once. Otherwise, it is set to 0 (for no
3158 uses) or const0_rtx for more than one use. This parameter may be zero,
3159 in which case this processing is not done.
3161 Store in *COUNT_PTR the number of actual instruction
3162 in the loop. We use this to decide what is worth moving out. */
3164 /* last_set[n] is nonzero iff reg n has been set in the current basic block.
3165 In that case, it is the insn that last set reg n. */
3168 count_loop_regs_set (from
, to
, may_not_move
, single_usage
, count_ptr
, nregs
)
3169 register rtx from
, to
;
3175 register rtx
*last_set
= (rtx
*) alloca (nregs
* sizeof (rtx
));
3177 register int count
= 0;
3180 bzero ((char *) last_set
, nregs
* sizeof (rtx
));
3181 for (insn
= from
; insn
!= to
; insn
= NEXT_INSN (insn
))
3183 if (GET_RTX_CLASS (GET_CODE (insn
)) == 'i')
3187 /* If requested, record registers that have exactly one use. */
3190 find_single_use_in_loop (insn
, PATTERN (insn
), single_usage
);
3192 /* Include uses in REG_EQUAL notes. */
3193 if (REG_NOTES (insn
))
3194 find_single_use_in_loop (insn
, REG_NOTES (insn
), single_usage
);
3197 if (GET_CODE (PATTERN (insn
)) == CLOBBER
3198 && GET_CODE (XEXP (PATTERN (insn
), 0)) == REG
)
3199 /* Don't move a reg that has an explicit clobber.
3200 We might do so sometimes, but it's not worth the pain. */
3201 may_not_move
[REGNO (XEXP (PATTERN (insn
), 0))] = 1;
3203 if (GET_CODE (PATTERN (insn
)) == SET
3204 || GET_CODE (PATTERN (insn
)) == CLOBBER
)
3206 dest
= SET_DEST (PATTERN (insn
));
3207 while (GET_CODE (dest
) == SUBREG
3208 || GET_CODE (dest
) == ZERO_EXTRACT
3209 || GET_CODE (dest
) == SIGN_EXTRACT
3210 || GET_CODE (dest
) == STRICT_LOW_PART
)
3211 dest
= XEXP (dest
, 0);
3212 if (GET_CODE (dest
) == REG
)
3214 register int regno
= REGNO (dest
);
3215 /* If this is the first setting of this reg
3216 in current basic block, and it was set before,
3217 it must be set in two basic blocks, so it cannot
3218 be moved out of the loop. */
3219 if (n_times_set
[regno
] > 0 && last_set
[regno
] == 0)
3220 may_not_move
[regno
] = 1;
3221 /* If this is not first setting in current basic block,
3222 see if reg was used in between previous one and this.
3223 If so, neither one can be moved. */
3224 if (last_set
[regno
] != 0
3225 && reg_used_between_p (dest
, last_set
[regno
], insn
))
3226 may_not_move
[regno
] = 1;
3227 if (n_times_set
[regno
] < 127)
3228 ++n_times_set
[regno
];
3229 last_set
[regno
] = insn
;
3232 else if (GET_CODE (PATTERN (insn
)) == PARALLEL
)
3235 for (i
= XVECLEN (PATTERN (insn
), 0) - 1; i
>= 0; i
--)
3237 register rtx x
= XVECEXP (PATTERN (insn
), 0, i
);
3238 if (GET_CODE (x
) == CLOBBER
&& GET_CODE (XEXP (x
, 0)) == REG
)
3239 /* Don't move a reg that has an explicit clobber.
3240 It's not worth the pain to try to do it correctly. */
3241 may_not_move
[REGNO (XEXP (x
, 0))] = 1;
3243 if (GET_CODE (x
) == SET
|| GET_CODE (x
) == CLOBBER
)
3245 dest
= SET_DEST (x
);
3246 while (GET_CODE (dest
) == SUBREG
3247 || GET_CODE (dest
) == ZERO_EXTRACT
3248 || GET_CODE (dest
) == SIGN_EXTRACT
3249 || GET_CODE (dest
) == STRICT_LOW_PART
)
3250 dest
= XEXP (dest
, 0);
3251 if (GET_CODE (dest
) == REG
)
3253 register int regno
= REGNO (dest
);
3254 if (n_times_set
[regno
] > 0 && last_set
[regno
] == 0)
3255 may_not_move
[regno
] = 1;
3256 if (last_set
[regno
] != 0
3257 && reg_used_between_p (dest
, last_set
[regno
], insn
))
3258 may_not_move
[regno
] = 1;
3259 if (n_times_set
[regno
] < 127)
3260 ++n_times_set
[regno
];
3261 last_set
[regno
] = insn
;
3268 if (GET_CODE (insn
) == CODE_LABEL
|| GET_CODE (insn
) == JUMP_INSN
)
3269 bzero ((char *) last_set
, nregs
* sizeof (rtx
));
3274 /* Given a loop that is bounded by LOOP_START and LOOP_END
3275 and that is entered at SCAN_START,
3276 return 1 if the register set in SET contained in insn INSN is used by
3277 any insn that precedes INSN in cyclic order starting
3278 from the loop entry point.
3280 We don't want to use INSN_LUID here because if we restrict INSN to those
3281 that have a valid INSN_LUID, it means we cannot move an invariant out
3282 from an inner loop past two loops. */
3285 loop_reg_used_before_p (set
, insn
, loop_start
, scan_start
, loop_end
)
3286 rtx set
, insn
, loop_start
, scan_start
, loop_end
;
3288 rtx reg
= SET_DEST (set
);
3291 /* Scan forward checking for register usage. If we hit INSN, we
3292 are done. Otherwise, if we hit LOOP_END, wrap around to LOOP_START. */
3293 for (p
= scan_start
; p
!= insn
; p
= NEXT_INSN (p
))
3295 if (GET_RTX_CLASS (GET_CODE (p
)) == 'i'
3296 && reg_overlap_mentioned_p (reg
, PATTERN (p
)))
3306 /* A "basic induction variable" or biv is a pseudo reg that is set
3307 (within this loop) only by incrementing or decrementing it. */
3308 /* A "general induction variable" or giv is a pseudo reg whose
3309 value is a linear function of a biv. */
3311 /* Bivs are recognized by `basic_induction_var';
3312 Givs by `general_induct_var'. */
3314 /* Indexed by register number, indicates whether or not register is an
3315 induction variable, and if so what type. */
3317 enum iv_mode
*reg_iv_type
;
3319 /* Indexed by register number, contains pointer to `struct induction'
3320 if register is an induction variable. This holds general info for
3321 all induction variables. */
3323 struct induction
**reg_iv_info
;
3325 /* Indexed by register number, contains pointer to `struct iv_class'
3326 if register is a basic induction variable. This holds info describing
3327 the class (a related group) of induction variables that the biv belongs
3330 struct iv_class
**reg_biv_class
;
3332 /* The head of a list which links together (via the next field)
3333 every iv class for the current loop. */
3335 struct iv_class
*loop_iv_list
;
3337 /* Communication with routines called via `note_stores'. */
3339 static rtx note_insn
;
3341 /* Dummy register to have non-zero DEST_REG for DEST_ADDR type givs. */
3343 static rtx addr_placeholder
;
3345 /* ??? Unfinished optimizations, and possible future optimizations,
3346 for the strength reduction code. */
3348 /* ??? There is one more optimization you might be interested in doing: to
3349 allocate pseudo registers for frequently-accessed memory locations.
3350 If the same memory location is referenced each time around, it might
3351 be possible to copy it into a register before and out after.
3352 This is especially useful when the memory location is a variable which
3353 is in a stack slot because somewhere its address is taken. If the
3354 loop doesn't contain a function call and the variable isn't volatile,
3355 it is safe to keep the value in a register for the duration of the
3356 loop. One tricky thing is that the copying of the value back from the
3357 register has to be done on all exits from the loop. You need to check that
3358 all the exits from the loop go to the same place. */
3360 /* ??? The interaction of biv elimination, and recognition of 'constant'
3361 bivs, may cause problems. */
3363 /* ??? Add heuristics so that DEST_ADDR strength reduction does not cause
3364 performance problems.
3366 Perhaps don't eliminate things that can be combined with an addressing
3367 mode. Find all givs that have the same biv, mult_val, and add_val;
3368 then for each giv, check to see if its only use dies in a following
3369 memory address. If so, generate a new memory address and check to see
3370 if it is valid. If it is valid, then store the modified memory address,
3371 otherwise, mark the giv as not done so that it will get its own iv. */
3373 /* ??? Could try to optimize branches when it is known that a biv is always
3376 /* ??? When replace a biv in a compare insn, we should replace with closest
3377 giv so that an optimized branch can still be recognized by the combiner,
3378 e.g. the VAX acb insn. */
3380 /* ??? Many of the checks involving uid_luid could be simplified if regscan
3381 was rerun in loop_optimize whenever a register was added or moved.
3382 Also, some of the optimizations could be a little less conservative. */
3384 /* Perform strength reduction and induction variable elimination. */
3386 /* Pseudo registers created during this function will be beyond the last
3387 valid index in several tables including n_times_set and regno_last_uid.
3388 This does not cause a problem here, because the added registers cannot be
3389 givs outside of their loop, and hence will never be reconsidered.
3390 But scan_loop must check regnos to make sure they are in bounds. */
3393 strength_reduce (scan_start
, end
, loop_top
, insn_count
,
3394 loop_start
, loop_end
, unroll_p
)
3408 /* This is 1 if current insn is not executed at least once for every loop
3410 int not_every_iteration
= 0;
3411 /* This is 1 if current insn may be executed more than once for every
3413 int maybe_multiple
= 0;
3414 /* Temporary list pointers for traversing loop_iv_list. */
3415 struct iv_class
*bl
, **backbl
;
3416 /* Ratio of extra register life span we can justify
3417 for saving an instruction. More if loop doesn't call subroutines
3418 since in that case saving an insn makes more difference
3419 and more registers are available. */
3420 /* ??? could set this to last value of threshold in move_movables */
3421 int threshold
= (loop_has_call
? 1 : 2) * (3 + n_non_fixed_regs
);
3422 /* Map of pseudo-register replacements. */
3426 rtx end_insert_before
;
3429 reg_iv_type
= (enum iv_mode
*) alloca (max_reg_before_loop
3430 * sizeof (enum iv_mode
*));
3431 bzero ((char *) reg_iv_type
, max_reg_before_loop
* sizeof (enum iv_mode
*));
3432 reg_iv_info
= (struct induction
**)
3433 alloca (max_reg_before_loop
* sizeof (struct induction
*));
3434 bzero ((char *) reg_iv_info
, (max_reg_before_loop
3435 * sizeof (struct induction
*)));
3436 reg_biv_class
= (struct iv_class
**)
3437 alloca (max_reg_before_loop
* sizeof (struct iv_class
*));
3438 bzero ((char *) reg_biv_class
, (max_reg_before_loop
3439 * sizeof (struct iv_class
*)));
3442 addr_placeholder
= gen_reg_rtx (Pmode
);
3444 /* Save insn immediately after the loop_end. Insns inserted after loop_end
3445 must be put before this insn, so that they will appear in the right
3446 order (i.e. loop order).
3448 If loop_end is the end of the current function, then emit a
3449 NOTE_INSN_DELETED after loop_end and set end_insert_before to the
3451 if (NEXT_INSN (loop_end
) != 0)
3452 end_insert_before
= NEXT_INSN (loop_end
);
3454 end_insert_before
= emit_note_after (NOTE_INSN_DELETED
, loop_end
);
3456 /* Scan through loop to find all possible bivs. */
3462 /* At end of a straight-in loop, we are done.
3463 At end of a loop entered at the bottom, scan the top. */
3464 if (p
== scan_start
)
3472 if (p
== scan_start
)
3476 if (GET_CODE (p
) == INSN
3477 && (set
= single_set (p
))
3478 && GET_CODE (SET_DEST (set
)) == REG
)
3480 dest_reg
= SET_DEST (set
);
3481 if (REGNO (dest_reg
) < max_reg_before_loop
3482 && REGNO (dest_reg
) >= FIRST_PSEUDO_REGISTER
3483 && reg_iv_type
[REGNO (dest_reg
)] != NOT_BASIC_INDUCT
)
3485 if (basic_induction_var (SET_SRC (set
), GET_MODE (SET_SRC (set
)),
3486 dest_reg
, p
, &inc_val
, &mult_val
))
3488 /* It is a possible basic induction variable.
3489 Create and initialize an induction structure for it. */
3492 = (struct induction
*) alloca (sizeof (struct induction
));
3494 record_biv (v
, p
, dest_reg
, inc_val
, mult_val
,
3495 not_every_iteration
, maybe_multiple
);
3496 reg_iv_type
[REGNO (dest_reg
)] = BASIC_INDUCT
;
3498 else if (REGNO (dest_reg
) < max_reg_before_loop
)
3499 reg_iv_type
[REGNO (dest_reg
)] = NOT_BASIC_INDUCT
;
3503 /* Past CODE_LABEL, we get to insns that may be executed multiple
3504 times. The only way we can be sure that they can't is if every
3505 every jump insn between here and the end of the loop either
3506 returns, exits the loop, is a forward jump, or is a jump
3507 to the loop start. */
3509 if (GET_CODE (p
) == CODE_LABEL
)
3517 insn
= NEXT_INSN (insn
);
3518 if (insn
== scan_start
)
3526 if (insn
== scan_start
)
3530 if (GET_CODE (insn
) == JUMP_INSN
3531 && GET_CODE (PATTERN (insn
)) != RETURN
3532 && (! condjump_p (insn
)
3533 || (JUMP_LABEL (insn
) != 0
3534 && JUMP_LABEL (insn
) != scan_start
3535 && (INSN_UID (JUMP_LABEL (insn
)) >= max_uid_for_loop
3536 || INSN_UID (insn
) >= max_uid_for_loop
3537 || (INSN_LUID (JUMP_LABEL (insn
))
3538 < INSN_LUID (insn
))))))
3546 /* Past a jump, we get to insns for which we can't count
3547 on whether they will be executed during each iteration. */
3548 /* This code appears twice in strength_reduce. There is also similar
3549 code in scan_loop. */
3550 if (GET_CODE (p
) == JUMP_INSN
3551 /* If we enter the loop in the middle, and scan around to the
3552 beginning, don't set not_every_iteration for that.
3553 This can be any kind of jump, since we want to know if insns
3554 will be executed if the loop is executed. */
3555 && ! (JUMP_LABEL (p
) == loop_top
3556 && ((NEXT_INSN (NEXT_INSN (p
)) == loop_end
&& simplejump_p (p
))
3557 || (NEXT_INSN (p
) == loop_end
&& condjump_p (p
)))))
3561 /* If this is a jump outside the loop, then it also doesn't
3562 matter. Check to see if the target of this branch is on the
3563 loop_number_exits_labels list. */
3565 for (label
= loop_number_exit_labels
[uid_loop_num
[INSN_UID (loop_start
)]];
3567 label
= LABEL_NEXTREF (label
))
3568 if (XEXP (label
, 0) == JUMP_LABEL (p
))
3572 not_every_iteration
= 1;
3575 else if (GET_CODE (p
) == NOTE
)
3577 /* At the virtual top of a converted loop, insns are again known to
3578 be executed each iteration: logically, the loop begins here
3579 even though the exit code has been duplicated. */
3580 if (NOTE_LINE_NUMBER (p
) == NOTE_INSN_LOOP_VTOP
&& loop_depth
== 0)
3581 not_every_iteration
= 0;
3582 else if (NOTE_LINE_NUMBER (p
) == NOTE_INSN_LOOP_BEG
)
3584 else if (NOTE_LINE_NUMBER (p
) == NOTE_INSN_LOOP_END
)
3588 /* Unlike in the code motion pass where MAYBE_NEVER indicates that
3589 an insn may never be executed, NOT_EVERY_ITERATION indicates whether
3590 or not an insn is known to be executed each iteration of the
3591 loop, whether or not any iterations are known to occur.
3593 Therefore, if we have just passed a label and have no more labels
3594 between here and the test insn of the loop, we know these insns
3595 will be executed each iteration. */
3597 if (not_every_iteration
&& GET_CODE (p
) == CODE_LABEL
3598 && no_labels_between_p (p
, loop_end
))
3599 not_every_iteration
= 0;
3602 /* Scan loop_iv_list to remove all regs that proved not to be bivs.
3603 Make a sanity check against n_times_set. */
3604 for (backbl
= &loop_iv_list
, bl
= *backbl
; bl
; bl
= bl
->next
)
3606 if (reg_iv_type
[bl
->regno
] != BASIC_INDUCT
3607 /* Above happens if register modified by subreg, etc. */
3608 /* Make sure it is not recognized as a basic induction var: */
3609 || n_times_set
[bl
->regno
] != bl
->biv_count
3610 /* If never incremented, it is invariant that we decided not to
3611 move. So leave it alone. */
3612 || ! bl
->incremented
)
3614 if (loop_dump_stream
)
3615 fprintf (loop_dump_stream
, "Reg %d: biv discarded, %s\n",
3617 (reg_iv_type
[bl
->regno
] != BASIC_INDUCT
3618 ? "not induction variable"
3619 : (! bl
->incremented
? "never incremented"
3622 reg_iv_type
[bl
->regno
] = NOT_BASIC_INDUCT
;
3629 if (loop_dump_stream
)
3630 fprintf (loop_dump_stream
, "Reg %d: biv verified\n", bl
->regno
);
3634 /* Exit if there are no bivs. */
3637 /* Can still unroll the loop anyways, but indicate that there is no
3638 strength reduction info available. */
3640 unroll_loop (loop_end
, insn_count
, loop_start
, end_insert_before
, 0);
3645 /* Find initial value for each biv by searching backwards from loop_start,
3646 halting at first label. Also record any test condition. */
3649 for (p
= loop_start
; p
&& GET_CODE (p
) != CODE_LABEL
; p
= PREV_INSN (p
))
3653 if (GET_CODE (p
) == CALL_INSN
)
3656 if (GET_CODE (p
) == INSN
|| GET_CODE (p
) == JUMP_INSN
3657 || GET_CODE (p
) == CALL_INSN
)
3658 note_stores (PATTERN (p
), record_initial
);
3660 /* Record any test of a biv that branches around the loop if no store
3661 between it and the start of loop. We only care about tests with
3662 constants and registers and only certain of those. */
3663 if (GET_CODE (p
) == JUMP_INSN
3664 && JUMP_LABEL (p
) != 0
3665 && next_real_insn (JUMP_LABEL (p
)) == next_real_insn (loop_end
)
3666 && (test
= get_condition_for_loop (p
)) != 0
3667 && GET_CODE (XEXP (test
, 0)) == REG
3668 && REGNO (XEXP (test
, 0)) < max_reg_before_loop
3669 && (bl
= reg_biv_class
[REGNO (XEXP (test
, 0))]) != 0
3670 && valid_initial_value_p (XEXP (test
, 1), p
, call_seen
, loop_start
)
3671 && bl
->init_insn
== 0)
3673 /* If an NE test, we have an initial value! */
3674 if (GET_CODE (test
) == NE
)
3677 bl
->init_set
= gen_rtx_SET (VOIDmode
,
3678 XEXP (test
, 0), XEXP (test
, 1));
3681 bl
->initial_test
= test
;
3685 /* Look at the each biv and see if we can say anything better about its
3686 initial value from any initializing insns set up above. (This is done
3687 in two passes to avoid missing SETs in a PARALLEL.) */
3688 for (bl
= loop_iv_list
; bl
; bl
= bl
->next
)
3693 if (! bl
->init_insn
)
3696 /* IF INIT_INSN has a REG_EQUAL or REG_EQUIV note and the value
3697 is a constant, use the value of that. */
3698 if (((note
= find_reg_note (bl
->init_insn
, REG_EQUAL
, 0)) != NULL
3699 && CONSTANT_P (XEXP (note
, 0)))
3700 || ((note
= find_reg_note (bl
->init_insn
, REG_EQUIV
, 0)) != NULL
3701 && CONSTANT_P (XEXP (note
, 0))))
3702 src
= XEXP (note
, 0);
3704 src
= SET_SRC (bl
->init_set
);
3706 if (loop_dump_stream
)
3707 fprintf (loop_dump_stream
,
3708 "Biv %d initialized at insn %d: initial value ",
3709 bl
->regno
, INSN_UID (bl
->init_insn
));
3711 if ((GET_MODE (src
) == GET_MODE (regno_reg_rtx
[bl
->regno
])
3712 || GET_MODE (src
) == VOIDmode
)
3713 && valid_initial_value_p (src
, bl
->init_insn
, call_seen
, loop_start
))
3715 bl
->initial_value
= src
;
3717 if (loop_dump_stream
)
3719 if (GET_CODE (src
) == CONST_INT
)
3721 fprintf (loop_dump_stream
, HOST_WIDE_INT_PRINT_DEC
, INTVAL (src
));
3722 fputc ('\n', loop_dump_stream
);
3726 print_rtl (loop_dump_stream
, src
);
3727 fprintf (loop_dump_stream
, "\n");
3733 /* Biv initial value is not simple move,
3734 so let it keep initial value of "itself". */
3736 if (loop_dump_stream
)
3737 fprintf (loop_dump_stream
, "is complex\n");
3741 /* Search the loop for general induction variables. */
3743 /* A register is a giv if: it is only set once, it is a function of a
3744 biv and a constant (or invariant), and it is not a biv. */
3746 not_every_iteration
= 0;
3752 /* At end of a straight-in loop, we are done.
3753 At end of a loop entered at the bottom, scan the top. */
3754 if (p
== scan_start
)
3762 if (p
== scan_start
)
3766 /* Look for a general induction variable in a register. */
3767 if (GET_CODE (p
) == INSN
3768 && (set
= single_set (p
))
3769 && GET_CODE (SET_DEST (set
)) == REG
3770 && ! may_not_optimize
[REGNO (SET_DEST (set
))])
3778 dest_reg
= SET_DEST (set
);
3779 if (REGNO (dest_reg
) < FIRST_PSEUDO_REGISTER
)
3782 if (/* SET_SRC is a giv. */
3783 ((benefit
= general_induction_var (SET_SRC (set
),
3786 /* Equivalent expression is a giv. */
3787 || ((regnote
= find_reg_note (p
, REG_EQUAL
, NULL_RTX
))
3788 && (benefit
= general_induction_var (XEXP (regnote
, 0),
3790 &add_val
, &mult_val
))))
3791 /* Don't try to handle any regs made by loop optimization.
3792 We have nothing on them in regno_first_uid, etc. */
3793 && REGNO (dest_reg
) < max_reg_before_loop
3794 /* Don't recognize a BASIC_INDUCT_VAR here. */
3795 && dest_reg
!= src_reg
3796 /* This must be the only place where the register is set. */
3797 && (n_times_set
[REGNO (dest_reg
)] == 1
3798 /* or all sets must be consecutive and make a giv. */
3799 || (benefit
= consec_sets_giv (benefit
, p
,
3801 &add_val
, &mult_val
))))
3805 = (struct induction
*) alloca (sizeof (struct induction
));
3808 /* If this is a library call, increase benefit. */
3809 if (find_reg_note (p
, REG_RETVAL
, NULL_RTX
))
3810 benefit
+= libcall_benefit (p
);
3812 /* Skip the consecutive insns, if there are any. */
3813 for (count
= n_times_set
[REGNO (dest_reg
)] - 1;
3816 /* If first insn of libcall sequence, skip to end.
3817 Do this at start of loop, since INSN is guaranteed to
3819 if (GET_CODE (p
) != NOTE
3820 && (temp
= find_reg_note (p
, REG_LIBCALL
, NULL_RTX
)))
3823 do p
= NEXT_INSN (p
);
3824 while (GET_CODE (p
) == NOTE
);
3827 record_giv (v
, p
, src_reg
, dest_reg
, mult_val
, add_val
, benefit
,
3828 DEST_REG
, not_every_iteration
, NULL_PTR
, loop_start
,
3834 #ifndef DONT_REDUCE_ADDR
3835 /* Look for givs which are memory addresses. */
3836 /* This resulted in worse code on a VAX 8600. I wonder if it
3838 if (GET_CODE (p
) == INSN
)
3839 find_mem_givs (PATTERN (p
), p
, not_every_iteration
, loop_start
,
3843 /* Update the status of whether giv can derive other givs. This can
3844 change when we pass a label or an insn that updates a biv. */
3845 if (GET_CODE (p
) == INSN
|| GET_CODE (p
) == JUMP_INSN
3846 || GET_CODE (p
) == CODE_LABEL
)
3847 update_giv_derive (p
);
3849 /* Past a jump, we get to insns for which we can't count
3850 on whether they will be executed during each iteration. */
3851 /* This code appears twice in strength_reduce. There is also similar
3852 code in scan_loop. */
3853 if (GET_CODE (p
) == JUMP_INSN
3854 /* If we enter the loop in the middle, and scan around to the
3855 beginning, don't set not_every_iteration for that.
3856 This can be any kind of jump, since we want to know if insns
3857 will be executed if the loop is executed. */
3858 && ! (JUMP_LABEL (p
) == loop_top
3859 && ((NEXT_INSN (NEXT_INSN (p
)) == loop_end
&& simplejump_p (p
))
3860 || (NEXT_INSN (p
) == loop_end
&& condjump_p (p
)))))
3864 /* If this is a jump outside the loop, then it also doesn't
3865 matter. Check to see if the target of this branch is on the
3866 loop_number_exits_labels list. */
3868 for (label
= loop_number_exit_labels
[uid_loop_num
[INSN_UID (loop_start
)]];
3870 label
= LABEL_NEXTREF (label
))
3871 if (XEXP (label
, 0) == JUMP_LABEL (p
))
3875 not_every_iteration
= 1;
3878 else if (GET_CODE (p
) == NOTE
)
3880 /* At the virtual top of a converted loop, insns are again known to
3881 be executed each iteration: logically, the loop begins here
3882 even though the exit code has been duplicated. */
3883 if (NOTE_LINE_NUMBER (p
) == NOTE_INSN_LOOP_VTOP
&& loop_depth
== 0)
3884 not_every_iteration
= 0;
3885 else if (NOTE_LINE_NUMBER (p
) == NOTE_INSN_LOOP_BEG
)
3887 else if (NOTE_LINE_NUMBER (p
) == NOTE_INSN_LOOP_END
)
3891 /* Unlike in the code motion pass where MAYBE_NEVER indicates that
3892 an insn may never be executed, NOT_EVERY_ITERATION indicates whether
3893 or not an insn is known to be executed each iteration of the
3894 loop, whether or not any iterations are known to occur.
3896 Therefore, if we have just passed a label and have no more labels
3897 between here and the test insn of the loop, we know these insns
3898 will be executed each iteration. */
3900 if (not_every_iteration
&& GET_CODE (p
) == CODE_LABEL
3901 && no_labels_between_p (p
, loop_end
))
3902 not_every_iteration
= 0;
3905 /* Try to calculate and save the number of loop iterations. This is
3906 set to zero if the actual number can not be calculated. This must
3907 be called after all giv's have been identified, since otherwise it may
3908 fail if the iteration variable is a giv. */
3910 loop_n_iterations
= loop_iterations (loop_start
, loop_end
);
3912 /* Now for each giv for which we still don't know whether or not it is
3913 replaceable, check to see if it is replaceable because its final value
3914 can be calculated. This must be done after loop_iterations is called,
3915 so that final_giv_value will work correctly. */
3917 for (bl
= loop_iv_list
; bl
; bl
= bl
->next
)
3919 struct induction
*v
;
3921 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
3922 if (! v
->replaceable
&& ! v
->not_replaceable
)
3923 check_final_value (v
, loop_start
, loop_end
);
3926 /* Try to prove that the loop counter variable (if any) is always
3927 nonnegative; if so, record that fact with a REG_NONNEG note
3928 so that "decrement and branch until zero" insn can be used. */
3929 check_dbra_loop (loop_end
, insn_count
, loop_start
);
3932 /* record loop-variables relevant for BCT optimization before unrolling
3933 the loop. Unrolling may update part of this information, and the
3934 correct data will be used for generating the BCT. */
3935 #ifdef HAVE_decrement_and_branch_on_count
3936 if (HAVE_decrement_and_branch_on_count
)
3937 analyze_loop_iterations (loop_start
, loop_end
);
3941 /* Create reg_map to hold substitutions for replaceable giv regs. */
3942 reg_map
= (rtx
*) alloca (max_reg_before_loop
* sizeof (rtx
));
3943 bzero ((char *) reg_map
, max_reg_before_loop
* sizeof (rtx
));
3945 /* Examine each iv class for feasibility of strength reduction/induction
3946 variable elimination. */
3948 for (bl
= loop_iv_list
; bl
; bl
= bl
->next
)
3950 struct induction
*v
;
3953 rtx final_value
= 0;
3955 /* Test whether it will be possible to eliminate this biv
3956 provided all givs are reduced. This is possible if either
3957 the reg is not used outside the loop, or we can compute
3958 what its final value will be.
3960 For architectures with a decrement_and_branch_until_zero insn,
3961 don't do this if we put a REG_NONNEG note on the endtest for
3964 /* Compare against bl->init_insn rather than loop_start.
3965 We aren't concerned with any uses of the biv between
3966 init_insn and loop_start since these won't be affected
3967 by the value of the biv elsewhere in the function, so
3968 long as init_insn doesn't use the biv itself.
3969 March 14, 1989 -- self@bayes.arc.nasa.gov */
3971 if ((uid_luid
[REGNO_LAST_UID (bl
->regno
)] < INSN_LUID (loop_end
)
3973 && INSN_UID (bl
->init_insn
) < max_uid_for_loop
3974 && uid_luid
[REGNO_FIRST_UID (bl
->regno
)] >= INSN_LUID (bl
->init_insn
)
3975 #ifdef HAVE_decrement_and_branch_until_zero
3978 && ! reg_mentioned_p (bl
->biv
->dest_reg
, SET_SRC (bl
->init_set
)))
3979 || ((final_value
= final_biv_value (bl
, loop_start
, loop_end
))
3980 #ifdef HAVE_decrement_and_branch_until_zero
3984 bl
->eliminable
= maybe_eliminate_biv (bl
, loop_start
, end
, 0,
3985 threshold
, insn_count
);
3988 if (loop_dump_stream
)
3990 fprintf (loop_dump_stream
,
3991 "Cannot eliminate biv %d.\n",
3993 fprintf (loop_dump_stream
,
3994 "First use: insn %d, last use: insn %d.\n",
3995 REGNO_FIRST_UID (bl
->regno
),
3996 REGNO_LAST_UID (bl
->regno
));
4000 /* Combine all giv's for this iv_class. */
4003 /* This will be true at the end, if all givs which depend on this
4004 biv have been strength reduced.
4005 We can't (currently) eliminate the biv unless this is so. */
4008 /* Check each giv in this class to see if we will benefit by reducing
4009 it. Skip giv's combined with others. */
4010 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
4012 struct induction
*tv
;
4014 if (v
->ignore
|| v
->same
)
4017 benefit
= v
->benefit
;
4019 /* Reduce benefit if not replaceable, since we will insert
4020 a move-insn to replace the insn that calculates this giv.
4021 Don't do this unless the giv is a user variable, since it
4022 will often be marked non-replaceable because of the duplication
4023 of the exit code outside the loop. In such a case, the copies
4024 we insert are dead and will be deleted. So they don't have
4025 a cost. Similar situations exist. */
4026 /* ??? The new final_[bg]iv_value code does a much better job
4027 of finding replaceable giv's, and hence this code may no longer
4029 if (! v
->replaceable
&& ! bl
->eliminable
4030 && REG_USERVAR_P (v
->dest_reg
))
4031 benefit
-= copy_cost
;
4033 /* Decrease the benefit to count the add-insns that we will
4034 insert to increment the reduced reg for the giv. */
4035 benefit
-= add_cost
* bl
->biv_count
;
4037 /* Decide whether to strength-reduce this giv or to leave the code
4038 unchanged (recompute it from the biv each time it is used).
4039 This decision can be made independently for each giv. */
4042 /* Attempt to guess whether autoincrement will handle some of the
4043 new add insns; if so, increase BENEFIT (undo the subtraction of
4044 add_cost that was done above). */
4045 if (v
->giv_type
== DEST_ADDR
4046 && GET_CODE (v
->mult_val
) == CONST_INT
)
4048 #if defined (HAVE_POST_INCREMENT) || defined (HAVE_PRE_INCREMENT)
4049 if (INTVAL (v
->mult_val
) == GET_MODE_SIZE (v
->mem_mode
))
4050 benefit
+= add_cost
* bl
->biv_count
;
4052 #if defined (HAVE_POST_DECREMENT) || defined (HAVE_PRE_DECREMENT)
4053 if (-INTVAL (v
->mult_val
) == GET_MODE_SIZE (v
->mem_mode
))
4054 benefit
+= add_cost
* bl
->biv_count
;
4059 /* If an insn is not to be strength reduced, then set its ignore
4060 flag, and clear all_reduced. */
4062 /* A giv that depends on a reversed biv must be reduced if it is
4063 used after the loop exit, otherwise, it would have the wrong
4064 value after the loop exit. To make it simple, just reduce all
4065 of such giv's whether or not we know they are used after the loop
4068 if ( ! flag_reduce_all_givs
&& v
->lifetime
* threshold
* benefit
< insn_count
4071 if (loop_dump_stream
)
4072 fprintf (loop_dump_stream
,
4073 "giv of insn %d not worth while, %d vs %d.\n",
4075 v
->lifetime
* threshold
* benefit
, insn_count
);
4081 /* Check that we can increment the reduced giv without a
4082 multiply insn. If not, reject it. */
4084 for (tv
= bl
->biv
; tv
; tv
= tv
->next_iv
)
4085 if (tv
->mult_val
== const1_rtx
4086 && ! product_cheap_p (tv
->add_val
, v
->mult_val
))
4088 if (loop_dump_stream
)
4089 fprintf (loop_dump_stream
,
4090 "giv of insn %d: would need a multiply.\n",
4091 INSN_UID (v
->insn
));
4099 /* Reduce each giv that we decided to reduce. */
4101 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
4103 struct induction
*tv
;
4104 if (! v
->ignore
&& v
->same
== 0)
4106 int auto_inc_opt
= 0;
4108 v
->new_reg
= gen_reg_rtx (v
->mode
);
4111 /* If the target has auto-increment addressing modes, and
4112 this is an address giv, then try to put the increment
4113 immediately after its use, so that flow can create an
4114 auto-increment addressing mode. */
4115 if (v
->giv_type
== DEST_ADDR
&& bl
->biv_count
== 1
4116 && bl
->biv
->always_executed
&& ! bl
->biv
->maybe_multiple
4117 /* We don't handle reversed biv's because bl->biv->insn
4118 does not have a valid INSN_LUID. */
4120 && v
->always_executed
&& ! v
->maybe_multiple
4121 && INSN_UID (v
->insn
) < max_uid_for_loop
)
4123 /* If other giv's have been combined with this one, then
4124 this will work only if all uses of the other giv's occur
4125 before this giv's insn. This is difficult to check.
4127 We simplify this by looking for the common case where
4128 there is one DEST_REG giv, and this giv's insn is the
4129 last use of the dest_reg of that DEST_REG giv. If the
4130 the increment occurs after the address giv, then we can
4131 perform the optimization. (Otherwise, the increment
4132 would have to go before other_giv, and we would not be
4133 able to combine it with the address giv to get an
4134 auto-inc address.) */
4135 if (v
->combined_with
)
4137 struct induction
*other_giv
= 0;
4139 for (tv
= bl
->giv
; tv
; tv
= tv
->next_iv
)
4147 if (! tv
&& other_giv
4148 && REGNO (other_giv
->dest_reg
) < max_reg_before_loop
4149 && (REGNO_LAST_UID (REGNO (other_giv
->dest_reg
))
4150 == INSN_UID (v
->insn
))
4151 && INSN_LUID (v
->insn
) < INSN_LUID (bl
->biv
->insn
))
4154 /* Check for case where increment is before the the address
4155 giv. Do this test in "loop order". */
4156 else if ((INSN_LUID (v
->insn
) > INSN_LUID (bl
->biv
->insn
)
4157 && (INSN_LUID (v
->insn
) < INSN_LUID (scan_start
)
4158 || (INSN_LUID (bl
->biv
->insn
)
4159 > INSN_LUID (scan_start
))))
4160 || (INSN_LUID (v
->insn
) < INSN_LUID (scan_start
)
4161 && (INSN_LUID (scan_start
)
4162 < INSN_LUID (bl
->biv
->insn
))))
4171 /* We can't put an insn immediately after one setting
4172 cc0, or immediately before one using cc0. */
4173 if ((auto_inc_opt
== 1 && sets_cc0_p (PATTERN (v
->insn
)))
4174 || (auto_inc_opt
== -1
4175 && (prev
= prev_nonnote_insn (v
->insn
)) != 0
4176 && GET_RTX_CLASS (GET_CODE (prev
)) == 'i'
4177 && sets_cc0_p (PATTERN (prev
))))
4183 v
->auto_inc_opt
= 1;
4187 /* For each place where the biv is incremented, add an insn
4188 to increment the new, reduced reg for the giv. */
4189 for (tv
= bl
->biv
; tv
; tv
= tv
->next_iv
)
4194 insert_before
= tv
->insn
;
4195 else if (auto_inc_opt
== 1)
4196 insert_before
= NEXT_INSN (v
->insn
);
4198 insert_before
= v
->insn
;
4200 if (tv
->mult_val
== const1_rtx
)
4201 emit_iv_add_mult (tv
->add_val
, v
->mult_val
,
4202 v
->new_reg
, v
->new_reg
, insert_before
);
4203 else /* tv->mult_val == const0_rtx */
4204 /* A multiply is acceptable here
4205 since this is presumed to be seldom executed. */
4206 emit_iv_add_mult (tv
->add_val
, v
->mult_val
,
4207 v
->add_val
, v
->new_reg
, insert_before
);
4210 /* Add code at loop start to initialize giv's reduced reg. */
4212 emit_iv_add_mult (bl
->initial_value
, v
->mult_val
,
4213 v
->add_val
, v
->new_reg
, loop_start
);
4217 /* Rescan all givs. If a giv is the same as a giv not reduced, mark it
4220 For each giv register that can be reduced now: if replaceable,
4221 substitute reduced reg wherever the old giv occurs;
4222 else add new move insn "giv_reg = reduced_reg".
4224 Also check for givs whose first use is their definition and whose
4225 last use is the definition of another giv. If so, it is likely
4226 dead and should not be used to eliminate a biv. */
4227 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
4229 if (v
->same
&& v
->same
->ignore
)
4235 if (v
->giv_type
== DEST_REG
4236 && REGNO_FIRST_UID (REGNO (v
->dest_reg
)) == INSN_UID (v
->insn
))
4238 struct induction
*v1
;
4240 for (v1
= bl
->giv
; v1
; v1
= v1
->next_iv
)
4241 if (REGNO_LAST_UID (REGNO (v
->dest_reg
)) == INSN_UID (v1
->insn
))
4245 /* Update expression if this was combined, in case other giv was
4248 v
->new_reg
= replace_rtx (v
->new_reg
,
4249 v
->same
->dest_reg
, v
->same
->new_reg
);
4251 if (v
->giv_type
== DEST_ADDR
)
4252 /* Store reduced reg as the address in the memref where we found
4254 validate_change (v
->insn
, v
->location
, v
->new_reg
, 0);
4255 else if (v
->replaceable
)
4257 reg_map
[REGNO (v
->dest_reg
)] = v
->new_reg
;
4260 /* I can no longer duplicate the original problem. Perhaps
4261 this is unnecessary now? */
4263 /* Replaceable; it isn't strictly necessary to delete the old
4264 insn and emit a new one, because v->dest_reg is now dead.
4266 However, especially when unrolling loops, the special
4267 handling for (set REG0 REG1) in the second cse pass may
4268 make v->dest_reg live again. To avoid this problem, emit
4269 an insn to set the original giv reg from the reduced giv.
4270 We can not delete the original insn, since it may be part
4271 of a LIBCALL, and the code in flow that eliminates dead
4272 libcalls will fail if it is deleted. */
4273 emit_insn_after (gen_move_insn (v
->dest_reg
, v
->new_reg
),
4279 /* Not replaceable; emit an insn to set the original giv reg from
4280 the reduced giv, same as above. */
4281 emit_insn_after (gen_move_insn (v
->dest_reg
, v
->new_reg
),
4285 /* When a loop is reversed, givs which depend on the reversed
4286 biv, and which are live outside the loop, must be set to their
4287 correct final value. This insn is only needed if the giv is
4288 not replaceable. The correct final value is the same as the
4289 value that the giv starts the reversed loop with. */
4290 if (bl
->reversed
&& ! v
->replaceable
)
4291 emit_iv_add_mult (bl
->initial_value
, v
->mult_val
,
4292 v
->add_val
, v
->dest_reg
, end_insert_before
);
4293 else if (v
->final_value
)
4297 /* If the loop has multiple exits, emit the insn before the
4298 loop to ensure that it will always be executed no matter
4299 how the loop exits. Otherwise, emit the insn after the loop,
4300 since this is slightly more efficient. */
4301 if (loop_number_exit_count
[uid_loop_num
[INSN_UID (loop_start
)]])
4302 insert_before
= loop_start
;
4304 insert_before
= end_insert_before
;
4305 emit_insn_before (gen_move_insn (v
->dest_reg
, v
->final_value
),
4309 /* If the insn to set the final value of the giv was emitted
4310 before the loop, then we must delete the insn inside the loop
4311 that sets it. If this is a LIBCALL, then we must delete
4312 every insn in the libcall. Note, however, that
4313 final_giv_value will only succeed when there are multiple
4314 exits if the giv is dead at each exit, hence it does not
4315 matter that the original insn remains because it is dead
4317 /* Delete the insn inside the loop that sets the giv since
4318 the giv is now set before (or after) the loop. */
4319 delete_insn (v
->insn
);
4323 if (loop_dump_stream
)
4325 fprintf (loop_dump_stream
, "giv at %d reduced to ",
4326 INSN_UID (v
->insn
));
4327 print_rtl (loop_dump_stream
, v
->new_reg
);
4328 fprintf (loop_dump_stream
, "\n");
4332 /* All the givs based on the biv bl have been reduced if they
4335 /* For each giv not marked as maybe dead that has been combined with a
4336 second giv, clear any "maybe dead" mark on that second giv.
4337 v->new_reg will either be or refer to the register of the giv it
4340 Doing this clearing avoids problems in biv elimination where a
4341 giv's new_reg is a complex value that can't be put in the insn but
4342 the giv combined with (with a reg as new_reg) is marked maybe_dead.
4343 Since the register will be used in either case, we'd prefer it be
4344 used from the simpler giv. */
4346 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
4347 if (! v
->maybe_dead
&& v
->same
)
4348 v
->same
->maybe_dead
= 0;
4350 /* Try to eliminate the biv, if it is a candidate.
4351 This won't work if ! all_reduced,
4352 since the givs we planned to use might not have been reduced.
4354 We have to be careful that we didn't initially think we could eliminate
4355 this biv because of a giv that we now think may be dead and shouldn't
4356 be used as a biv replacement.
4358 Also, there is the possibility that we may have a giv that looks
4359 like it can be used to eliminate a biv, but the resulting insn
4360 isn't valid. This can happen, for example, on the 88k, where a
4361 JUMP_INSN can compare a register only with zero. Attempts to
4362 replace it with a compare with a constant will fail.
4364 Note that in cases where this call fails, we may have replaced some
4365 of the occurrences of the biv with a giv, but no harm was done in
4366 doing so in the rare cases where it can occur. */
4368 if (all_reduced
== 1 && bl
->eliminable
4369 && maybe_eliminate_biv (bl
, loop_start
, end
, 1,
4370 threshold
, insn_count
))
4373 /* ?? If we created a new test to bypass the loop entirely,
4374 or otherwise drop straight in, based on this test, then
4375 we might want to rewrite it also. This way some later
4376 pass has more hope of removing the initialization of this
4379 /* If final_value != 0, then the biv may be used after loop end
4380 and we must emit an insn to set it just in case.
4382 Reversed bivs already have an insn after the loop setting their
4383 value, so we don't need another one. We can't calculate the
4384 proper final value for such a biv here anyways. */
4385 if (final_value
!= 0 && ! bl
->reversed
)
4389 /* If the loop has multiple exits, emit the insn before the
4390 loop to ensure that it will always be executed no matter
4391 how the loop exits. Otherwise, emit the insn after the
4392 loop, since this is slightly more efficient. */
4393 if (loop_number_exit_count
[uid_loop_num
[INSN_UID (loop_start
)]])
4394 insert_before
= loop_start
;
4396 insert_before
= end_insert_before
;
4398 emit_insn_before (gen_move_insn (bl
->biv
->dest_reg
, final_value
),
4403 /* Delete all of the instructions inside the loop which set
4404 the biv, as they are all dead. If is safe to delete them,
4405 because an insn setting a biv will never be part of a libcall. */
4406 /* However, deleting them will invalidate the regno_last_uid info,
4407 so keeping them around is more convenient. Final_biv_value
4408 will only succeed when there are multiple exits if the biv
4409 is dead at each exit, hence it does not matter that the original
4410 insn remains, because it is dead anyways. */
4411 for (v
= bl
->biv
; v
; v
= v
->next_iv
)
4412 delete_insn (v
->insn
);
4415 if (loop_dump_stream
)
4416 fprintf (loop_dump_stream
, "Reg %d: biv eliminated\n",
4421 /* Go through all the instructions in the loop, making all the
4422 register substitutions scheduled in REG_MAP. */
4424 for (p
= loop_start
; p
!= end
; p
= NEXT_INSN (p
))
4425 if (GET_CODE (p
) == INSN
|| GET_CODE (p
) == JUMP_INSN
4426 || GET_CODE (p
) == CALL_INSN
)
4428 replace_regs (PATTERN (p
), reg_map
, max_reg_before_loop
, 0);
4429 replace_regs (REG_NOTES (p
), reg_map
, max_reg_before_loop
, 0);
4433 /* Unroll loops from within strength reduction so that we can use the
4434 induction variable information that strength_reduce has already
4438 unroll_loop (loop_end
, insn_count
, loop_start
, end_insert_before
, 1);
4441 /* instrument the loop with bct insn */
4442 #ifdef HAVE_decrement_and_branch_on_count
4443 if (HAVE_decrement_and_branch_on_count
)
4444 insert_bct (loop_start
, loop_end
);
4448 if (loop_dump_stream
)
4449 fprintf (loop_dump_stream
, "\n");
4452 /* Return 1 if X is a valid source for an initial value (or as value being
4453 compared against in an initial test).
4455 X must be either a register or constant and must not be clobbered between
4456 the current insn and the start of the loop.
4458 INSN is the insn containing X. */
4461 valid_initial_value_p (x
, insn
, call_seen
, loop_start
)
4470 /* Only consider pseudos we know about initialized in insns whose luids
4472 if (GET_CODE (x
) != REG
4473 || REGNO (x
) >= max_reg_before_loop
)
4476 /* Don't use call-clobbered registers across a call which clobbers it. On
4477 some machines, don't use any hard registers at all. */
4478 if (REGNO (x
) < FIRST_PSEUDO_REGISTER
4479 && (SMALL_REGISTER_CLASSES
4480 || (call_used_regs
[REGNO (x
)] && call_seen
)))
4483 /* Don't use registers that have been clobbered before the start of the
4485 if (reg_set_between_p (x
, insn
, loop_start
))
4491 /* Scan X for memory refs and check each memory address
4492 as a possible giv. INSN is the insn whose pattern X comes from.
4493 NOT_EVERY_ITERATION is 1 if the insn might not be executed during
4494 every loop iteration. */
4497 find_mem_givs (x
, insn
, not_every_iteration
, loop_start
, loop_end
)
4500 int not_every_iteration
;
4501 rtx loop_start
, loop_end
;
4504 register enum rtx_code code
;
4510 code
= GET_CODE (x
);
4534 benefit
= general_induction_var (XEXP (x
, 0),
4535 &src_reg
, &add_val
, &mult_val
);
4537 /* Don't make a DEST_ADDR giv with mult_val == 1 && add_val == 0.
4538 Such a giv isn't useful. */
4539 if (benefit
> 0 && (mult_val
!= const1_rtx
|| add_val
!= const0_rtx
))
4541 /* Found one; record it. */
4543 = (struct induction
*) oballoc (sizeof (struct induction
));
4545 record_giv (v
, insn
, src_reg
, addr_placeholder
, mult_val
,
4546 add_val
, benefit
, DEST_ADDR
, not_every_iteration
,
4547 &XEXP (x
, 0), loop_start
, loop_end
);
4549 v
->mem_mode
= GET_MODE (x
);
4558 /* Recursively scan the subexpressions for other mem refs. */
4560 fmt
= GET_RTX_FORMAT (code
);
4561 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
4563 find_mem_givs (XEXP (x
, i
), insn
, not_every_iteration
, loop_start
,
4565 else if (fmt
[i
] == 'E')
4566 for (j
= 0; j
< XVECLEN (x
, i
); j
++)
4567 find_mem_givs (XVECEXP (x
, i
, j
), insn
, not_every_iteration
,
4568 loop_start
, loop_end
);
4571 /* Fill in the data about one biv update.
4572 V is the `struct induction' in which we record the biv. (It is
4573 allocated by the caller, with alloca.)
4574 INSN is the insn that sets it.
4575 DEST_REG is the biv's reg.
4577 MULT_VAL is const1_rtx if the biv is being incremented here, in which case
4578 INC_VAL is the increment. Otherwise, MULT_VAL is const0_rtx and the biv is
4579 being set to INC_VAL.
4581 NOT_EVERY_ITERATION is nonzero if this biv update is not know to be
4582 executed every iteration; MAYBE_MULTIPLE is nonzero if this biv update
4583 can be executed more than once per iteration. If MAYBE_MULTIPLE
4584 and NOT_EVERY_ITERATION are both zero, we know that the biv update is
4585 executed exactly once per iteration. */
4588 record_biv (v
, insn
, dest_reg
, inc_val
, mult_val
,
4589 not_every_iteration
, maybe_multiple
)
4590 struct induction
*v
;
4595 int not_every_iteration
;
4598 struct iv_class
*bl
;
4601 v
->src_reg
= dest_reg
;
4602 v
->dest_reg
= dest_reg
;
4603 v
->mult_val
= mult_val
;
4604 v
->add_val
= inc_val
;
4605 v
->mode
= GET_MODE (dest_reg
);
4606 v
->always_computable
= ! not_every_iteration
;
4607 v
->always_executed
= ! not_every_iteration
;
4608 v
->maybe_multiple
= maybe_multiple
;
4610 /* Add this to the reg's iv_class, creating a class
4611 if this is the first incrementation of the reg. */
4613 bl
= reg_biv_class
[REGNO (dest_reg
)];
4616 /* Create and initialize new iv_class. */
4618 bl
= (struct iv_class
*) oballoc (sizeof (struct iv_class
));
4620 bl
->regno
= REGNO (dest_reg
);
4626 /* Set initial value to the reg itself. */
4627 bl
->initial_value
= dest_reg
;
4628 /* We haven't seen the initializing insn yet */
4631 bl
->initial_test
= 0;
4632 bl
->incremented
= 0;
4636 bl
->total_benefit
= 0;
4638 /* Add this class to loop_iv_list. */
4639 bl
->next
= loop_iv_list
;
4642 /* Put it in the array of biv register classes. */
4643 reg_biv_class
[REGNO (dest_reg
)] = bl
;
4646 /* Update IV_CLASS entry for this biv. */
4647 v
->next_iv
= bl
->biv
;
4650 if (mult_val
== const1_rtx
)
4651 bl
->incremented
= 1;
4653 if (loop_dump_stream
)
4655 fprintf (loop_dump_stream
,
4656 "Insn %d: possible biv, reg %d,",
4657 INSN_UID (insn
), REGNO (dest_reg
));
4658 if (GET_CODE (inc_val
) == CONST_INT
)
4660 fprintf (loop_dump_stream
, " const =");
4661 fprintf (loop_dump_stream
, HOST_WIDE_INT_PRINT_DEC
, INTVAL (inc_val
));
4662 fputc ('\n', loop_dump_stream
);
4666 fprintf (loop_dump_stream
, " const = ");
4667 print_rtl (loop_dump_stream
, inc_val
);
4668 fprintf (loop_dump_stream
, "\n");
4673 /* Fill in the data about one giv.
4674 V is the `struct induction' in which we record the giv. (It is
4675 allocated by the caller, with alloca.)
4676 INSN is the insn that sets it.
4677 BENEFIT estimates the savings from deleting this insn.
4678 TYPE is DEST_REG or DEST_ADDR; it says whether the giv is computed
4679 into a register or is used as a memory address.
4681 SRC_REG is the biv reg which the giv is computed from.
4682 DEST_REG is the giv's reg (if the giv is stored in a reg).
4683 MULT_VAL and ADD_VAL are the coefficients used to compute the giv.
4684 LOCATION points to the place where this giv's value appears in INSN. */
4687 record_giv (v
, insn
, src_reg
, dest_reg
, mult_val
, add_val
, benefit
,
4688 type
, not_every_iteration
, location
, loop_start
, loop_end
)
4689 struct induction
*v
;
4693 rtx mult_val
, add_val
;
4696 int not_every_iteration
;
4698 rtx loop_start
, loop_end
;
4700 struct induction
*b
;
4701 struct iv_class
*bl
;
4702 rtx set
= single_set (insn
);
4705 v
->src_reg
= src_reg
;
4707 v
->dest_reg
= dest_reg
;
4708 v
->mult_val
= mult_val
;
4709 v
->add_val
= add_val
;
4710 v
->benefit
= benefit
;
4711 v
->location
= location
;
4713 v
->combined_with
= 0;
4714 v
->maybe_multiple
= 0;
4716 v
->derive_adjustment
= 0;
4722 v
->auto_inc_opt
= 0;
4726 /* The v->always_computable field is used in update_giv_derive, to
4727 determine whether a giv can be used to derive another giv. For a
4728 DEST_REG giv, INSN computes a new value for the giv, so its value
4729 isn't computable if INSN insn't executed every iteration.
4730 However, for a DEST_ADDR giv, INSN merely uses the value of the giv;
4731 it does not compute a new value. Hence the value is always computable
4732 regardless of whether INSN is executed each iteration. */
4734 if (type
== DEST_ADDR
)
4735 v
->always_computable
= 1;
4737 v
->always_computable
= ! not_every_iteration
;
4739 v
->always_executed
= ! not_every_iteration
;
4741 if (type
== DEST_ADDR
)
4743 v
->mode
= GET_MODE (*location
);
4747 else /* type == DEST_REG */
4749 v
->mode
= GET_MODE (SET_DEST (set
));
4751 v
->lifetime
= (uid_luid
[REGNO_LAST_UID (REGNO (dest_reg
))]
4752 - uid_luid
[REGNO_FIRST_UID (REGNO (dest_reg
))]);
4754 v
->times_used
= n_times_used
[REGNO (dest_reg
)];
4756 /* If the lifetime is zero, it means that this register is
4757 really a dead store. So mark this as a giv that can be
4758 ignored. This will not prevent the biv from being eliminated. */
4759 if (v
->lifetime
== 0)
4762 reg_iv_type
[REGNO (dest_reg
)] = GENERAL_INDUCT
;
4763 reg_iv_info
[REGNO (dest_reg
)] = v
;
4766 /* Add the giv to the class of givs computed from one biv. */
4768 bl
= reg_biv_class
[REGNO (src_reg
)];
4771 v
->next_iv
= bl
->giv
;
4773 /* Don't count DEST_ADDR. This is supposed to count the number of
4774 insns that calculate givs. */
4775 if (type
== DEST_REG
)
4777 bl
->total_benefit
+= benefit
;
4780 /* Fatal error, biv missing for this giv? */
4783 if (type
== DEST_ADDR
)
4787 /* The giv can be replaced outright by the reduced register only if all
4788 of the following conditions are true:
4789 - the insn that sets the giv is always executed on any iteration
4790 on which the giv is used at all
4791 (there are two ways to deduce this:
4792 either the insn is executed on every iteration,
4793 or all uses follow that insn in the same basic block),
4794 - the giv is not used outside the loop
4795 - no assignments to the biv occur during the giv's lifetime. */
4797 if (REGNO_FIRST_UID (REGNO (dest_reg
)) == INSN_UID (insn
)
4798 /* Previous line always fails if INSN was moved by loop opt. */
4799 && uid_luid
[REGNO_LAST_UID (REGNO (dest_reg
))] < INSN_LUID (loop_end
)
4800 && (! not_every_iteration
4801 || last_use_this_basic_block (dest_reg
, insn
)))
4803 /* Now check that there are no assignments to the biv within the
4804 giv's lifetime. This requires two separate checks. */
4806 /* Check each biv update, and fail if any are between the first
4807 and last use of the giv.
4809 If this loop contains an inner loop that was unrolled, then
4810 the insn modifying the biv may have been emitted by the loop
4811 unrolling code, and hence does not have a valid luid. Just
4812 mark the biv as not replaceable in this case. It is not very
4813 useful as a biv, because it is used in two different loops.
4814 It is very unlikely that we would be able to optimize the giv
4815 using this biv anyways. */
4818 for (b
= bl
->biv
; b
; b
= b
->next_iv
)
4820 if (INSN_UID (b
->insn
) >= max_uid_for_loop
4821 || ((uid_luid
[INSN_UID (b
->insn
)]
4822 >= uid_luid
[REGNO_FIRST_UID (REGNO (dest_reg
))])
4823 && (uid_luid
[INSN_UID (b
->insn
)]
4824 <= uid_luid
[REGNO_LAST_UID (REGNO (dest_reg
))])))
4827 v
->not_replaceable
= 1;
4832 /* If there are any backwards branches that go from after the
4833 biv update to before it, then this giv is not replaceable. */
4835 for (b
= bl
->biv
; b
; b
= b
->next_iv
)
4836 if (back_branch_in_range_p (b
->insn
, loop_start
, loop_end
))
4839 v
->not_replaceable
= 1;
4845 /* May still be replaceable, we don't have enough info here to
4848 v
->not_replaceable
= 0;
4852 if (loop_dump_stream
)
4854 if (type
== DEST_REG
)
4855 fprintf (loop_dump_stream
, "Insn %d: giv reg %d",
4856 INSN_UID (insn
), REGNO (dest_reg
));
4858 fprintf (loop_dump_stream
, "Insn %d: dest address",
4861 fprintf (loop_dump_stream
, " src reg %d benefit %d",
4862 REGNO (src_reg
), v
->benefit
);
4863 fprintf (loop_dump_stream
, " used %d lifetime %d",
4864 v
->times_used
, v
->lifetime
);
4867 fprintf (loop_dump_stream
, " replaceable");
4869 if (GET_CODE (mult_val
) == CONST_INT
)
4871 fprintf (loop_dump_stream
, " mult ");
4872 fprintf (loop_dump_stream
, HOST_WIDE_INT_PRINT_DEC
, INTVAL (mult_val
));
4876 fprintf (loop_dump_stream
, " mult ");
4877 print_rtl (loop_dump_stream
, mult_val
);
4880 if (GET_CODE (add_val
) == CONST_INT
)
4882 fprintf (loop_dump_stream
, " add ");
4883 fprintf (loop_dump_stream
, HOST_WIDE_INT_PRINT_DEC
, INTVAL (add_val
));
4887 fprintf (loop_dump_stream
, " add ");
4888 print_rtl (loop_dump_stream
, add_val
);
4892 if (loop_dump_stream
)
4893 fprintf (loop_dump_stream
, "\n");
4898 /* All this does is determine whether a giv can be made replaceable because
4899 its final value can be calculated. This code can not be part of record_giv
4900 above, because final_giv_value requires that the number of loop iterations
4901 be known, and that can not be accurately calculated until after all givs
4902 have been identified. */
4905 check_final_value (v
, loop_start
, loop_end
)
4906 struct induction
*v
;
4907 rtx loop_start
, loop_end
;
4909 struct iv_class
*bl
;
4910 rtx final_value
= 0;
4912 bl
= reg_biv_class
[REGNO (v
->src_reg
)];
4914 /* DEST_ADDR givs will never reach here, because they are always marked
4915 replaceable above in record_giv. */
4917 /* The giv can be replaced outright by the reduced register only if all
4918 of the following conditions are true:
4919 - the insn that sets the giv is always executed on any iteration
4920 on which the giv is used at all
4921 (there are two ways to deduce this:
4922 either the insn is executed on every iteration,
4923 or all uses follow that insn in the same basic block),
4924 - its final value can be calculated (this condition is different
4925 than the one above in record_giv)
4926 - no assignments to the biv occur during the giv's lifetime. */
4929 /* This is only called now when replaceable is known to be false. */
4930 /* Clear replaceable, so that it won't confuse final_giv_value. */
4934 if ((final_value
= final_giv_value (v
, loop_start
, loop_end
))
4935 && (v
->always_computable
|| last_use_this_basic_block (v
->dest_reg
, v
->insn
)))
4937 int biv_increment_seen
= 0;
4943 /* When trying to determine whether or not a biv increment occurs
4944 during the lifetime of the giv, we can ignore uses of the variable
4945 outside the loop because final_value is true. Hence we can not
4946 use regno_last_uid and regno_first_uid as above in record_giv. */
4948 /* Search the loop to determine whether any assignments to the
4949 biv occur during the giv's lifetime. Start with the insn
4950 that sets the giv, and search around the loop until we come
4951 back to that insn again.
4953 Also fail if there is a jump within the giv's lifetime that jumps
4954 to somewhere outside the lifetime but still within the loop. This
4955 catches spaghetti code where the execution order is not linear, and
4956 hence the above test fails. Here we assume that the giv lifetime
4957 does not extend from one iteration of the loop to the next, so as
4958 to make the test easier. Since the lifetime isn't known yet,
4959 this requires two loops. See also record_giv above. */
4961 last_giv_use
= v
->insn
;
4967 p
= NEXT_INSN (loop_start
);
4971 if (GET_CODE (p
) == INSN
|| GET_CODE (p
) == JUMP_INSN
4972 || GET_CODE (p
) == CALL_INSN
)
4974 if (biv_increment_seen
)
4976 if (reg_mentioned_p (v
->dest_reg
, PATTERN (p
)))
4979 v
->not_replaceable
= 1;
4983 else if (reg_set_p (v
->src_reg
, PATTERN (p
)))
4984 biv_increment_seen
= 1;
4985 else if (reg_mentioned_p (v
->dest_reg
, PATTERN (p
)))
4990 /* Now that the lifetime of the giv is known, check for branches
4991 from within the lifetime to outside the lifetime if it is still
5001 p
= NEXT_INSN (loop_start
);
5002 if (p
== last_giv_use
)
5005 if (GET_CODE (p
) == JUMP_INSN
&& JUMP_LABEL (p
)
5006 && LABEL_NAME (JUMP_LABEL (p
))
5007 && ((INSN_UID (JUMP_LABEL (p
)) >= max_uid_for_loop
)
5008 || (INSN_UID (v
->insn
) >= max_uid_for_loop
)
5009 || (INSN_UID (last_giv_use
) >= max_uid_for_loop
)
5010 || (INSN_LUID (JUMP_LABEL (p
)) < INSN_LUID (v
->insn
)
5011 && INSN_LUID (JUMP_LABEL (p
)) > INSN_LUID (loop_start
))
5012 || (INSN_LUID (JUMP_LABEL (p
)) > INSN_LUID (last_giv_use
)
5013 && INSN_LUID (JUMP_LABEL (p
)) < INSN_LUID (loop_end
))))
5016 v
->not_replaceable
= 1;
5018 if (loop_dump_stream
)
5019 fprintf (loop_dump_stream
,
5020 "Found branch outside giv lifetime.\n");
5027 /* If it is replaceable, then save the final value. */
5029 v
->final_value
= final_value
;
5032 if (loop_dump_stream
&& v
->replaceable
)
5033 fprintf (loop_dump_stream
, "Insn %d: giv reg %d final_value replaceable\n",
5034 INSN_UID (v
->insn
), REGNO (v
->dest_reg
));
5037 /* Update the status of whether a giv can derive other givs.
5039 We need to do something special if there is or may be an update to the biv
5040 between the time the giv is defined and the time it is used to derive
5043 In addition, a giv that is only conditionally set is not allowed to
5044 derive another giv once a label has been passed.
5046 The cases we look at are when a label or an update to a biv is passed. */
5049 update_giv_derive (p
)
5052 struct iv_class
*bl
;
5053 struct induction
*biv
, *giv
;
5057 /* Search all IV classes, then all bivs, and finally all givs.
5059 There are three cases we are concerned with. First we have the situation
5060 of a giv that is only updated conditionally. In that case, it may not
5061 derive any givs after a label is passed.
5063 The second case is when a biv update occurs, or may occur, after the
5064 definition of a giv. For certain biv updates (see below) that are
5065 known to occur between the giv definition and use, we can adjust the
5066 giv definition. For others, or when the biv update is conditional,
5067 we must prevent the giv from deriving any other givs. There are two
5068 sub-cases within this case.
5070 If this is a label, we are concerned with any biv update that is done
5071 conditionally, since it may be done after the giv is defined followed by
5072 a branch here (actually, we need to pass both a jump and a label, but
5073 this extra tracking doesn't seem worth it).
5075 If this is a jump, we are concerned about any biv update that may be
5076 executed multiple times. We are actually only concerned about
5077 backward jumps, but it is probably not worth performing the test
5078 on the jump again here.
5080 If this is a biv update, we must adjust the giv status to show that a
5081 subsequent biv update was performed. If this adjustment cannot be done,
5082 the giv cannot derive further givs. */
5084 for (bl
= loop_iv_list
; bl
; bl
= bl
->next
)
5085 for (biv
= bl
->biv
; biv
; biv
= biv
->next_iv
)
5086 if (GET_CODE (p
) == CODE_LABEL
|| GET_CODE (p
) == JUMP_INSN
5089 for (giv
= bl
->giv
; giv
; giv
= giv
->next_iv
)
5091 /* If cant_derive is already true, there is no point in
5092 checking all of these conditions again. */
5093 if (giv
->cant_derive
)
5096 /* If this giv is conditionally set and we have passed a label,
5097 it cannot derive anything. */
5098 if (GET_CODE (p
) == CODE_LABEL
&& ! giv
->always_computable
)
5099 giv
->cant_derive
= 1;
5101 /* Skip givs that have mult_val == 0, since
5102 they are really invariants. Also skip those that are
5103 replaceable, since we know their lifetime doesn't contain
5105 else if (giv
->mult_val
== const0_rtx
|| giv
->replaceable
)
5108 /* The only way we can allow this giv to derive another
5109 is if this is a biv increment and we can form the product
5110 of biv->add_val and giv->mult_val. In this case, we will
5111 be able to compute a compensation. */
5112 else if (biv
->insn
== p
)
5116 if (biv
->mult_val
== const1_rtx
)
5117 tem
= simplify_giv_expr (gen_rtx_MULT (giv
->mode
,
5122 if (tem
&& giv
->derive_adjustment
)
5123 tem
= simplify_giv_expr (gen_rtx_PLUS (giv
->mode
, tem
,
5124 giv
->derive_adjustment
),
5127 giv
->derive_adjustment
= tem
;
5129 giv
->cant_derive
= 1;
5131 else if ((GET_CODE (p
) == CODE_LABEL
&& ! biv
->always_computable
)
5132 || (GET_CODE (p
) == JUMP_INSN
&& biv
->maybe_multiple
))
5133 giv
->cant_derive
= 1;
5138 /* Check whether an insn is an increment legitimate for a basic induction var.
5139 X is the source of insn P, or a part of it.
5140 MODE is the mode in which X should be interpreted.
5142 DEST_REG is the putative biv, also the destination of the insn.
5143 We accept patterns of these forms:
5144 REG = REG + INVARIANT (includes REG = REG - CONSTANT)
5145 REG = INVARIANT + REG
5147 If X is suitable, we return 1, set *MULT_VAL to CONST1_RTX,
5148 and store the additive term into *INC_VAL.
5150 If X is an assignment of an invariant into DEST_REG, we set
5151 *MULT_VAL to CONST0_RTX, and store the invariant into *INC_VAL.
5153 We also want to detect a BIV when it corresponds to a variable
5154 whose mode was promoted via PROMOTED_MODE. In that case, an increment
5155 of the variable may be a PLUS that adds a SUBREG of that variable to
5156 an invariant and then sign- or zero-extends the result of the PLUS
5159 Most GIVs in such cases will be in the promoted mode, since that is the
5160 probably the natural computation mode (and almost certainly the mode
5161 used for addresses) on the machine. So we view the pseudo-reg containing
5162 the variable as the BIV, as if it were simply incremented.
5164 Note that treating the entire pseudo as a BIV will result in making
5165 simple increments to any GIVs based on it. However, if the variable
5166 overflows in its declared mode but not its promoted mode, the result will
5167 be incorrect. This is acceptable if the variable is signed, since
5168 overflows in such cases are undefined, but not if it is unsigned, since
5169 those overflows are defined. So we only check for SIGN_EXTEND and
5172 If we cannot find a biv, we return 0. */
5175 basic_induction_var (x
, mode
, dest_reg
, p
, inc_val
, mult_val
)
5177 enum machine_mode mode
;
5183 register enum rtx_code code
;
5187 code
= GET_CODE (x
);
5191 if (XEXP (x
, 0) == dest_reg
5192 || (GET_CODE (XEXP (x
, 0)) == SUBREG
5193 && SUBREG_PROMOTED_VAR_P (XEXP (x
, 0))
5194 && SUBREG_REG (XEXP (x
, 0)) == dest_reg
))
5196 else if (XEXP (x
, 1) == dest_reg
5197 || (GET_CODE (XEXP (x
, 1)) == SUBREG
5198 && SUBREG_PROMOTED_VAR_P (XEXP (x
, 1))
5199 && SUBREG_REG (XEXP (x
, 1)) == dest_reg
))
5204 if (invariant_p (arg
) != 1)
5207 *inc_val
= convert_modes (GET_MODE (dest_reg
), GET_MODE (x
), arg
, 0);
5208 *mult_val
= const1_rtx
;
5212 /* If this is a SUBREG for a promoted variable, check the inner
5214 if (SUBREG_PROMOTED_VAR_P (x
))
5215 return basic_induction_var (SUBREG_REG (x
), GET_MODE (SUBREG_REG (x
)),
5216 dest_reg
, p
, inc_val
, mult_val
);
5220 /* If this register is assigned in the previous insn, look at its
5221 source, but don't go outside the loop or past a label. */
5223 for (insn
= PREV_INSN (p
);
5224 (insn
&& GET_CODE (insn
) == NOTE
5225 && NOTE_LINE_NUMBER (insn
) != NOTE_INSN_LOOP_BEG
);
5226 insn
= PREV_INSN (insn
))
5230 set
= single_set (insn
);
5233 && (SET_DEST (set
) == x
5234 || (GET_CODE (SET_DEST (set
)) == SUBREG
5235 && (GET_MODE_SIZE (GET_MODE (SET_DEST (set
)))
5237 && SUBREG_REG (SET_DEST (set
)) == x
)))
5238 return basic_induction_var (SET_SRC (set
),
5239 (GET_MODE (SET_SRC (set
)) == VOIDmode
5241 : GET_MODE (SET_SRC (set
))),
5244 /* ... fall through ... */
5246 /* Can accept constant setting of biv only when inside inner most loop.
5247 Otherwise, a biv of an inner loop may be incorrectly recognized
5248 as a biv of the outer loop,
5249 causing code to be moved INTO the inner loop. */
5251 if (invariant_p (x
) != 1)
5256 if (loops_enclosed
== 1)
5258 /* Possible bug here? Perhaps we don't know the mode of X. */
5259 *inc_val
= convert_modes (GET_MODE (dest_reg
), mode
, x
, 0);
5260 *mult_val
= const0_rtx
;
5267 return basic_induction_var (XEXP (x
, 0), GET_MODE (XEXP (x
, 0)),
5268 dest_reg
, p
, inc_val
, mult_val
);
5270 /* Similar, since this can be a sign extension. */
5271 for (insn
= PREV_INSN (p
);
5272 (insn
&& GET_CODE (insn
) == NOTE
5273 && NOTE_LINE_NUMBER (insn
) != NOTE_INSN_LOOP_BEG
);
5274 insn
= PREV_INSN (insn
))
5278 set
= single_set (insn
);
5280 if (set
&& SET_DEST (set
) == XEXP (x
, 0)
5281 && GET_CODE (XEXP (x
, 1)) == CONST_INT
5282 && INTVAL (XEXP (x
, 1)) >= 0
5283 && GET_CODE (SET_SRC (set
)) == ASHIFT
5284 && XEXP (x
, 1) == XEXP (SET_SRC (set
), 1))
5285 return basic_induction_var (XEXP (SET_SRC (set
), 0),
5286 GET_MODE (XEXP (x
, 0)),
5287 dest_reg
, insn
, inc_val
, mult_val
);
5295 /* A general induction variable (giv) is any quantity that is a linear
5296 function of a basic induction variable,
5297 i.e. giv = biv * mult_val + add_val.
5298 The coefficients can be any loop invariant quantity.
5299 A giv need not be computed directly from the biv;
5300 it can be computed by way of other givs. */
5302 /* Determine whether X computes a giv.
5303 If it does, return a nonzero value
5304 which is the benefit from eliminating the computation of X;
5305 set *SRC_REG to the register of the biv that it is computed from;
5306 set *ADD_VAL and *MULT_VAL to the coefficients,
5307 such that the value of X is biv * mult + add; */
5310 general_induction_var (x
, src_reg
, add_val
, mult_val
)
5320 /* If this is an invariant, forget it, it isn't a giv. */
5321 if (invariant_p (x
) == 1)
5324 /* See if the expression could be a giv and get its form.
5325 Mark our place on the obstack in case we don't find a giv. */
5326 storage
= (char *) oballoc (0);
5327 x
= simplify_giv_expr (x
, &benefit
);
5334 switch (GET_CODE (x
))
5338 /* Since this is now an invariant and wasn't before, it must be a giv
5339 with MULT_VAL == 0. It doesn't matter which BIV we associate this
5341 *src_reg
= loop_iv_list
->biv
->dest_reg
;
5342 *mult_val
= const0_rtx
;
5347 /* This is equivalent to a BIV. */
5349 *mult_val
= const1_rtx
;
5350 *add_val
= const0_rtx
;
5354 /* Either (plus (biv) (invar)) or
5355 (plus (mult (biv) (invar_1)) (invar_2)). */
5356 if (GET_CODE (XEXP (x
, 0)) == MULT
)
5358 *src_reg
= XEXP (XEXP (x
, 0), 0);
5359 *mult_val
= XEXP (XEXP (x
, 0), 1);
5363 *src_reg
= XEXP (x
, 0);
5364 *mult_val
= const1_rtx
;
5366 *add_val
= XEXP (x
, 1);
5370 /* ADD_VAL is zero. */
5371 *src_reg
= XEXP (x
, 0);
5372 *mult_val
= XEXP (x
, 1);
5373 *add_val
= const0_rtx
;
5380 /* Remove any enclosing USE from ADD_VAL and MULT_VAL (there will be
5381 unless they are CONST_INT). */
5382 if (GET_CODE (*add_val
) == USE
)
5383 *add_val
= XEXP (*add_val
, 0);
5384 if (GET_CODE (*mult_val
) == USE
)
5385 *mult_val
= XEXP (*mult_val
, 0);
5387 benefit
+= rtx_cost (orig_x
, SET
);
5389 /* Always return some benefit if this is a giv so it will be detected
5390 as such. This allows elimination of bivs that might otherwise
5391 not be eliminated. */
5392 return benefit
== 0 ? 1 : benefit
;
5395 /* Given an expression, X, try to form it as a linear function of a biv.
5396 We will canonicalize it to be of the form
5397 (plus (mult (BIV) (invar_1))
5399 with possible degeneracies.
5401 The invariant expressions must each be of a form that can be used as a
5402 machine operand. We surround then with a USE rtx (a hack, but localized
5403 and certainly unambiguous!) if not a CONST_INT for simplicity in this
5404 routine; it is the caller's responsibility to strip them.
5406 If no such canonicalization is possible (i.e., two biv's are used or an
5407 expression that is neither invariant nor a biv or giv), this routine
5410 For a non-zero return, the result will have a code of CONST_INT, USE,
5411 REG (for a BIV), PLUS, or MULT. No other codes will occur.
5413 *BENEFIT will be incremented by the benefit of any sub-giv encountered. */
5416 simplify_giv_expr (x
, benefit
)
5420 enum machine_mode mode
= GET_MODE (x
);
5424 /* If this is not an integer mode, or if we cannot do arithmetic in this
5425 mode, this can't be a giv. */
5426 if (mode
!= VOIDmode
5427 && (GET_MODE_CLASS (mode
) != MODE_INT
5428 || GET_MODE_BITSIZE (mode
) > HOST_BITS_PER_WIDE_INT
))
5431 switch (GET_CODE (x
))
5434 arg0
= simplify_giv_expr (XEXP (x
, 0), benefit
);
5435 arg1
= simplify_giv_expr (XEXP (x
, 1), benefit
);
5436 if (arg0
== 0 || arg1
== 0)
5439 /* Put constant last, CONST_INT last if both constant. */
5440 if ((GET_CODE (arg0
) == USE
5441 || GET_CODE (arg0
) == CONST_INT
)
5442 && GET_CODE (arg1
) != CONST_INT
)
5443 tem
= arg0
, arg0
= arg1
, arg1
= tem
;
5445 /* Handle addition of zero, then addition of an invariant. */
5446 if (arg1
== const0_rtx
)
5448 else if (GET_CODE (arg1
) == CONST_INT
|| GET_CODE (arg1
) == USE
)
5449 switch (GET_CODE (arg0
))
5453 /* Both invariant. Only valid if sum is machine operand.
5454 First strip off possible USE on the operands. */
5455 if (GET_CODE (arg0
) == USE
)
5456 arg0
= XEXP (arg0
, 0);
5458 if (GET_CODE (arg1
) == USE
)
5459 arg1
= XEXP (arg1
, 0);
5462 if (CONSTANT_P (arg0
) && GET_CODE (arg1
) == CONST_INT
)
5464 tem
= plus_constant (arg0
, INTVAL (arg1
));
5465 if (GET_CODE (tem
) != CONST_INT
)
5466 tem
= gen_rtx_USE (mode
, tem
);
5470 /* Adding two invariants must result in an invariant,
5471 so enclose addition operation inside a USE and
5473 tem
= gen_rtx_USE (mode
, gen_rtx_PLUS (mode
, arg0
, arg1
));
5480 /* biv + invar or mult + invar. Return sum. */
5481 return gen_rtx_PLUS (mode
, arg0
, arg1
);
5484 /* (a + invar_1) + invar_2. Associate. */
5485 return simplify_giv_expr (gen_rtx_PLUS (mode
,
5488 XEXP (arg0
, 1), arg1
)),
5495 /* Each argument must be either REG, PLUS, or MULT. Convert REG to
5496 MULT to reduce cases. */
5497 if (GET_CODE (arg0
) == REG
)
5498 arg0
= gen_rtx_MULT (mode
, arg0
, const1_rtx
);
5499 if (GET_CODE (arg1
) == REG
)
5500 arg1
= gen_rtx_MULT (mode
, arg1
, const1_rtx
);
5502 /* Now have PLUS + PLUS, PLUS + MULT, MULT + PLUS, or MULT + MULT.
5503 Put a MULT first, leaving PLUS + PLUS, MULT + PLUS, or MULT + MULT.
5504 Recurse to associate the second PLUS. */
5505 if (GET_CODE (arg1
) == MULT
)
5506 tem
= arg0
, arg0
= arg1
, arg1
= tem
;
5508 if (GET_CODE (arg1
) == PLUS
)
5509 return simplify_giv_expr (gen_rtx_PLUS (mode
,
5510 gen_rtx_PLUS (mode
, arg0
,
5515 /* Now must have MULT + MULT. Distribute if same biv, else not giv. */
5516 if (GET_CODE (arg0
) != MULT
|| GET_CODE (arg1
) != MULT
)
5519 if (XEXP (arg0
, 0) != XEXP (arg1
, 0))
5522 return simplify_giv_expr (gen_rtx_MULT (mode
,
5530 /* Handle "a - b" as "a + b * (-1)". */
5531 return simplify_giv_expr (gen_rtx_PLUS (mode
,
5533 gen_rtx_MULT (mode
, XEXP (x
, 1),
5538 arg0
= simplify_giv_expr (XEXP (x
, 0), benefit
);
5539 arg1
= simplify_giv_expr (XEXP (x
, 1), benefit
);
5540 if (arg0
== 0 || arg1
== 0)
5543 /* Put constant last, CONST_INT last if both constant. */
5544 if ((GET_CODE (arg0
) == USE
|| GET_CODE (arg0
) == CONST_INT
)
5545 && GET_CODE (arg1
) != CONST_INT
)
5546 tem
= arg0
, arg0
= arg1
, arg1
= tem
;
5548 /* If second argument is not now constant, not giv. */
5549 if (GET_CODE (arg1
) != USE
&& GET_CODE (arg1
) != CONST_INT
)
5552 /* Handle multiply by 0 or 1. */
5553 if (arg1
== const0_rtx
)
5556 else if (arg1
== const1_rtx
)
5559 switch (GET_CODE (arg0
))
5562 /* biv * invar. Done. */
5563 return gen_rtx_MULT (mode
, arg0
, arg1
);
5566 /* Product of two constants. */
5567 return GEN_INT (INTVAL (arg0
) * INTVAL (arg1
));
5570 /* invar * invar. Not giv. */
5574 /* (a * invar_1) * invar_2. Associate. */
5575 return simplify_giv_expr (gen_rtx_MULT (mode
, XEXP (arg0
, 0),
5582 /* (a + invar_1) * invar_2. Distribute. */
5583 return simplify_giv_expr (gen_rtx_PLUS (mode
,
5597 /* Shift by constant is multiply by power of two. */
5598 if (GET_CODE (XEXP (x
, 1)) != CONST_INT
)
5601 return simplify_giv_expr (gen_rtx_MULT (mode
,
5603 GEN_INT ((HOST_WIDE_INT
) 1
5604 << INTVAL (XEXP (x
, 1)))),
5608 /* "-a" is "a * (-1)" */
5609 return simplify_giv_expr (gen_rtx_MULT (mode
, XEXP (x
, 0), constm1_rtx
),
5613 /* "~a" is "-a - 1". Silly, but easy. */
5614 return simplify_giv_expr (gen_rtx_MINUS (mode
,
5615 gen_rtx_NEG (mode
, XEXP (x
, 0)),
5620 /* Already in proper form for invariant. */
5624 /* If this is a new register, we can't deal with it. */
5625 if (REGNO (x
) >= max_reg_before_loop
)
5628 /* Check for biv or giv. */
5629 switch (reg_iv_type
[REGNO (x
)])
5633 case GENERAL_INDUCT
:
5635 struct induction
*v
= reg_iv_info
[REGNO (x
)];
5637 /* Form expression from giv and add benefit. Ensure this giv
5638 can derive another and subtract any needed adjustment if so. */
5639 *benefit
+= v
->benefit
;
5643 tem
= gen_rtx_PLUS (mode
, gen_rtx_MULT (mode
, v
->src_reg
,
5646 if (v
->derive_adjustment
)
5647 tem
= gen_rtx_MINUS (mode
, tem
, v
->derive_adjustment
);
5648 return simplify_giv_expr (tem
, benefit
);
5655 /* Fall through to general case. */
5657 /* If invariant, return as USE (unless CONST_INT).
5658 Otherwise, not giv. */
5659 if (GET_CODE (x
) == USE
)
5662 if (invariant_p (x
) == 1)
5664 if (GET_CODE (x
) == CONST_INT
)
5667 return gen_rtx_USE (mode
, x
);
5674 /* Help detect a giv that is calculated by several consecutive insns;
5678 The caller has already identified the first insn P as having a giv as dest;
5679 we check that all other insns that set the same register follow
5680 immediately after P, that they alter nothing else,
5681 and that the result of the last is still a giv.
5683 The value is 0 if the reg set in P is not really a giv.
5684 Otherwise, the value is the amount gained by eliminating
5685 all the consecutive insns that compute the value.
5687 FIRST_BENEFIT is the amount gained by eliminating the first insn, P.
5688 SRC_REG is the reg of the biv; DEST_REG is the reg of the giv.
5690 The coefficients of the ultimate giv value are stored in
5691 *MULT_VAL and *ADD_VAL. */
5694 consec_sets_giv (first_benefit
, p
, src_reg
, dest_reg
,
5709 /* Indicate that this is a giv so that we can update the value produced in
5710 each insn of the multi-insn sequence.
5712 This induction structure will be used only by the call to
5713 general_induction_var below, so we can allocate it on our stack.
5714 If this is a giv, our caller will replace the induct var entry with
5715 a new induction structure. */
5717 = (struct induction
*) alloca (sizeof (struct induction
));
5718 v
->src_reg
= src_reg
;
5719 v
->mult_val
= *mult_val
;
5720 v
->add_val
= *add_val
;
5721 v
->benefit
= first_benefit
;
5723 v
->derive_adjustment
= 0;
5725 reg_iv_type
[REGNO (dest_reg
)] = GENERAL_INDUCT
;
5726 reg_iv_info
[REGNO (dest_reg
)] = v
;
5728 count
= n_times_set
[REGNO (dest_reg
)] - 1;
5733 code
= GET_CODE (p
);
5735 /* If libcall, skip to end of call sequence. */
5736 if (code
== INSN
&& (temp
= find_reg_note (p
, REG_LIBCALL
, NULL_RTX
)))
5740 && (set
= single_set (p
))
5741 && GET_CODE (SET_DEST (set
)) == REG
5742 && SET_DEST (set
) == dest_reg
5743 && ((benefit
= general_induction_var (SET_SRC (set
), &src_reg
,
5745 /* Giv created by equivalent expression. */
5746 || ((temp
= find_reg_note (p
, REG_EQUAL
, NULL_RTX
))
5747 && (benefit
= general_induction_var (XEXP (temp
, 0), &src_reg
,
5748 add_val
, mult_val
))))
5749 && src_reg
== v
->src_reg
)
5751 if (find_reg_note (p
, REG_RETVAL
, NULL_RTX
))
5752 benefit
+= libcall_benefit (p
);
5755 v
->mult_val
= *mult_val
;
5756 v
->add_val
= *add_val
;
5757 v
->benefit
= benefit
;
5759 else if (code
!= NOTE
)
5761 /* Allow insns that set something other than this giv to a
5762 constant. Such insns are needed on machines which cannot
5763 include long constants and should not disqualify a giv. */
5765 && (set
= single_set (p
))
5766 && SET_DEST (set
) != dest_reg
5767 && CONSTANT_P (SET_SRC (set
)))
5770 reg_iv_type
[REGNO (dest_reg
)] = UNKNOWN_INDUCT
;
5778 /* Return an rtx, if any, that expresses giv G2 as a function of the register
5779 represented by G1. If no such expression can be found, or it is clear that
5780 it cannot possibly be a valid address, 0 is returned.
5782 To perform the computation, we note that
5785 where `v' is the biv.
5787 So G2 = (c/a) * G1 + (d - b*c/a) */
5791 express_from (g1
, g2
)
5792 struct induction
*g1
, *g2
;
5796 /* The value that G1 will be multiplied by must be a constant integer. Also,
5797 the only chance we have of getting a valid address is if b*c/a (see above
5798 for notation) is also an integer. */
5799 if (GET_CODE (g1
->mult_val
) != CONST_INT
5800 || GET_CODE (g2
->mult_val
) != CONST_INT
5801 || GET_CODE (g1
->add_val
) != CONST_INT
5802 || g1
->mult_val
== const0_rtx
5803 || INTVAL (g2
->mult_val
) % INTVAL (g1
->mult_val
) != 0)
5806 mult
= GEN_INT (INTVAL (g2
->mult_val
) / INTVAL (g1
->mult_val
));
5807 add
= plus_constant (g2
->add_val
, - INTVAL (g1
->add_val
) * INTVAL (mult
));
5809 /* Form simplified final result. */
5810 if (mult
== const0_rtx
)
5812 else if (mult
== const1_rtx
)
5813 mult
= g1
->dest_reg
;
5815 mult
= gen_rtx_MULT (g2
->mode
, g1
->dest_reg
, mult
);
5817 if (add
== const0_rtx
)
5820 return gen_rtx_PLUS (g2
->mode
, mult
, add
);
5824 /* Return 1 if giv G2 can be combined with G1. This means that G2 can use
5825 (either directly or via an address expression) a register used to represent
5826 G1. Set g2->new_reg to a represtation of G1 (normally just
5830 combine_givs_p (g1
, g2
)
5831 struct induction
*g1
, *g2
;
5835 /* If these givs are identical, they can be combined. */
5836 if (rtx_equal_p (g1
->mult_val
, g2
->mult_val
)
5837 && rtx_equal_p (g1
->add_val
, g2
->add_val
))
5839 g2
->new_reg
= g1
->dest_reg
;
5844 /* If G2 can be expressed as a function of G1 and that function is valid
5845 as an address and no more expensive than using a register for G2,
5846 the expression of G2 in terms of G1 can be used. */
5847 if (g2
->giv_type
== DEST_ADDR
5848 && (tem
= express_from (g1
, g2
)) != 0
5849 && memory_address_p (g2
->mem_mode
, tem
)
5850 && ADDRESS_COST (tem
) <= ADDRESS_COST (*g2
->location
))
5860 #ifdef GIV_SORT_CRITERION
5861 /* Compare two givs and sort the most desirable one for combinations first.
5862 This is used only in one qsort call below. */
5866 struct induction
**x
, **y
;
5868 GIV_SORT_CRITERION (*x
, *y
);
5874 /* Check all pairs of givs for iv_class BL and see if any can be combined with
5875 any other. If so, point SAME to the giv combined with and set NEW_REG to
5876 be an expression (in terms of the other giv's DEST_REG) equivalent to the
5877 giv. Also, update BENEFIT and related fields for cost/benefit analysis. */
5881 struct iv_class
*bl
;
5883 struct induction
*g1
, *g2
, **giv_array
;
5884 int i
, j
, giv_count
, pass
;
5886 /* Count givs, because bl->giv_count is incorrect here. */
5888 for (g1
= bl
->giv
; g1
; g1
= g1
->next_iv
)
5892 = (struct induction
**) alloca (giv_count
* sizeof (struct induction
*));
5894 for (g1
= bl
->giv
; g1
; g1
= g1
->next_iv
)
5895 giv_array
[i
++] = g1
;
5897 #ifdef GIV_SORT_CRITERION
5898 /* Sort the givs if GIV_SORT_CRITERION is defined.
5899 This is usually defined for processors which lack
5900 negative register offsets so more givs may be combined. */
5902 if (loop_dump_stream
)
5903 fprintf (loop_dump_stream
, "%d givs counted, sorting...\n", giv_count
);
5905 qsort (giv_array
, giv_count
, sizeof (struct induction
*), giv_sort
);
5908 for (i
= 0; i
< giv_count
; i
++)
5911 for (pass
= 0; pass
<= 1; pass
++)
5912 for (j
= 0; j
< giv_count
; j
++)
5916 /* First try to combine with replaceable givs, then all givs. */
5917 && (g1
->replaceable
|| pass
== 1)
5918 /* If either has already been combined or is to be ignored, can't
5920 && ! g1
->ignore
&& ! g2
->ignore
&& ! g1
->same
&& ! g2
->same
5921 /* If something has been based on G2, G2 cannot itself be based
5922 on something else. */
5923 && ! g2
->combined_with
5924 && combine_givs_p (g1
, g2
))
5926 /* g2->new_reg set by `combine_givs_p' */
5928 g1
->combined_with
= 1;
5930 /* If one of these givs is a DEST_REG that was only used
5931 once, by the other giv, this is actually a single use.
5932 The DEST_REG has the correct cost, while the other giv
5933 counts the REG use too often. */
5934 if (g2
->giv_type
== DEST_REG
5935 && n_times_used
[REGNO (g2
->dest_reg
)] == 1
5936 && reg_mentioned_p (g2
->dest_reg
, PATTERN (g1
->insn
)))
5937 g1
->benefit
= g2
->benefit
;
5938 else if (g1
->giv_type
!= DEST_REG
5939 || n_times_used
[REGNO (g1
->dest_reg
)] != 1
5940 || ! reg_mentioned_p (g1
->dest_reg
,
5941 PATTERN (g2
->insn
)))
5943 g1
->benefit
+= g2
->benefit
;
5944 g1
->times_used
+= g2
->times_used
;
5946 /* ??? The new final_[bg]iv_value code does a much better job
5947 of finding replaceable giv's, and hence this code may no
5948 longer be necessary. */
5949 if (! g2
->replaceable
&& REG_USERVAR_P (g2
->dest_reg
))
5950 g1
->benefit
-= copy_cost
;
5951 g1
->lifetime
+= g2
->lifetime
;
5953 if (loop_dump_stream
)
5954 fprintf (loop_dump_stream
, "giv at %d combined with giv at %d\n",
5955 INSN_UID (g2
->insn
), INSN_UID (g1
->insn
));
5961 /* EMIT code before INSERT_BEFORE to set REG = B * M + A. */
5964 emit_iv_add_mult (b
, m
, a
, reg
, insert_before
)
5965 rtx b
; /* initial value of basic induction variable */
5966 rtx m
; /* multiplicative constant */
5967 rtx a
; /* additive constant */
5968 rtx reg
; /* destination register */
5974 /* Prevent unexpected sharing of these rtx. */
5978 /* Increase the lifetime of any invariants moved further in code. */
5979 update_reg_last_use (a
, insert_before
);
5980 update_reg_last_use (b
, insert_before
);
5981 update_reg_last_use (m
, insert_before
);
5984 result
= expand_mult_add (b
, reg
, m
, a
, GET_MODE (reg
), 0);
5986 emit_move_insn (reg
, result
);
5987 seq
= gen_sequence ();
5990 emit_insn_before (seq
, insert_before
);
5992 record_base_value (REGNO (reg
), b
, 0);
5995 /* Test whether A * B can be computed without
5996 an actual multiply insn. Value is 1 if so. */
5999 product_cheap_p (a
, b
)
6005 struct obstack
*old_rtl_obstack
= rtl_obstack
;
6006 char *storage
= (char *) obstack_alloc (&temp_obstack
, 0);
6009 /* If only one is constant, make it B. */
6010 if (GET_CODE (a
) == CONST_INT
)
6011 tmp
= a
, a
= b
, b
= tmp
;
6013 /* If first constant, both constant, so don't need multiply. */
6014 if (GET_CODE (a
) == CONST_INT
)
6017 /* If second not constant, neither is constant, so would need multiply. */
6018 if (GET_CODE (b
) != CONST_INT
)
6021 /* One operand is constant, so might not need multiply insn. Generate the
6022 code for the multiply and see if a call or multiply, or long sequence
6023 of insns is generated. */
6025 rtl_obstack
= &temp_obstack
;
6027 expand_mult (GET_MODE (a
), a
, b
, NULL_RTX
, 0);
6028 tmp
= gen_sequence ();
6031 if (GET_CODE (tmp
) == SEQUENCE
)
6033 if (XVEC (tmp
, 0) == 0)
6035 else if (XVECLEN (tmp
, 0) > 3)
6038 for (i
= 0; i
< XVECLEN (tmp
, 0); i
++)
6040 rtx insn
= XVECEXP (tmp
, 0, i
);
6042 if (GET_CODE (insn
) != INSN
6043 || (GET_CODE (PATTERN (insn
)) == SET
6044 && GET_CODE (SET_SRC (PATTERN (insn
))) == MULT
)
6045 || (GET_CODE (PATTERN (insn
)) == PARALLEL
6046 && GET_CODE (XVECEXP (PATTERN (insn
), 0, 0)) == SET
6047 && GET_CODE (SET_SRC (XVECEXP (PATTERN (insn
), 0, 0))) == MULT
))
6054 else if (GET_CODE (tmp
) == SET
6055 && GET_CODE (SET_SRC (tmp
)) == MULT
)
6057 else if (GET_CODE (tmp
) == PARALLEL
6058 && GET_CODE (XVECEXP (tmp
, 0, 0)) == SET
6059 && GET_CODE (SET_SRC (XVECEXP (tmp
, 0, 0))) == MULT
)
6062 /* Free any storage we obtained in generating this multiply and restore rtl
6063 allocation to its normal obstack. */
6064 obstack_free (&temp_obstack
, storage
);
6065 rtl_obstack
= old_rtl_obstack
;
6070 /* Check to see if loop can be terminated by a "decrement and branch until
6071 zero" instruction. If so, add a REG_NONNEG note to the branch insn if so.
6072 Also try reversing an increment loop to a decrement loop
6073 to see if the optimization can be performed.
6074 Value is nonzero if optimization was performed. */
6076 /* This is useful even if the architecture doesn't have such an insn,
6077 because it might change a loops which increments from 0 to n to a loop
6078 which decrements from n to 0. A loop that decrements to zero is usually
6079 faster than one that increments from zero. */
6081 /* ??? This could be rewritten to use some of the loop unrolling procedures,
6082 such as approx_final_value, biv_total_increment, loop_iterations, and
6083 final_[bg]iv_value. */
6086 check_dbra_loop (loop_end
, insn_count
, loop_start
)
6091 struct iv_class
*bl
;
6098 rtx before_comparison
;
6102 int compare_and_branch
;
6104 /* If last insn is a conditional branch, and the insn before tests a
6105 register value, try to optimize it. Otherwise, we can't do anything. */
6107 jump
= PREV_INSN (loop_end
);
6108 comparison
= get_condition_for_loop (jump
);
6109 if (comparison
== 0)
6112 /* Try to compute whether the compare/branch at the loop end is one or
6113 two instructions. */
6114 get_condition (jump
, &first_compare
);
6115 if (first_compare
== jump
)
6116 compare_and_branch
= 1;
6117 else if (first_compare
== prev_nonnote_insn (jump
))
6118 compare_and_branch
= 2;
6122 /* Check all of the bivs to see if the compare uses one of them.
6123 Skip biv's set more than once because we can't guarantee that
6124 it will be zero on the last iteration. Also skip if the biv is
6125 used between its update and the test insn. */
6127 for (bl
= loop_iv_list
; bl
; bl
= bl
->next
)
6129 if (bl
->biv_count
== 1
6130 && bl
->biv
->dest_reg
== XEXP (comparison
, 0)
6131 && ! reg_used_between_p (regno_reg_rtx
[bl
->regno
], bl
->biv
->insn
,
6139 /* Look for the case where the basic induction variable is always
6140 nonnegative, and equals zero on the last iteration.
6141 In this case, add a reg_note REG_NONNEG, which allows the
6142 m68k DBRA instruction to be used. */
6144 if (((GET_CODE (comparison
) == GT
6145 && GET_CODE (XEXP (comparison
, 1)) == CONST_INT
6146 && INTVAL (XEXP (comparison
, 1)) == -1)
6147 || (GET_CODE (comparison
) == NE
&& XEXP (comparison
, 1) == const0_rtx
))
6148 && GET_CODE (bl
->biv
->add_val
) == CONST_INT
6149 && INTVAL (bl
->biv
->add_val
) < 0)
6151 /* Initial value must be greater than 0,
6152 init_val % -dec_value == 0 to ensure that it equals zero on
6153 the last iteration */
6155 if (GET_CODE (bl
->initial_value
) == CONST_INT
6156 && INTVAL (bl
->initial_value
) > 0
6157 && (INTVAL (bl
->initial_value
)
6158 % (-INTVAL (bl
->biv
->add_val
))) == 0)
6160 /* register always nonnegative, add REG_NOTE to branch */
6161 REG_NOTES (PREV_INSN (loop_end
))
6162 = gen_rtx_EXPR_LIST (REG_NONNEG
, NULL_RTX
,
6163 REG_NOTES (PREV_INSN (loop_end
)));
6169 /* If the decrement is 1 and the value was tested as >= 0 before
6170 the loop, then we can safely optimize. */
6171 for (p
= loop_start
; p
; p
= PREV_INSN (p
))
6173 if (GET_CODE (p
) == CODE_LABEL
)
6175 if (GET_CODE (p
) != JUMP_INSN
)
6178 before_comparison
= get_condition_for_loop (p
);
6179 if (before_comparison
6180 && XEXP (before_comparison
, 0) == bl
->biv
->dest_reg
6181 && GET_CODE (before_comparison
) == LT
6182 && XEXP (before_comparison
, 1) == const0_rtx
6183 && ! reg_set_between_p (bl
->biv
->dest_reg
, p
, loop_start
)
6184 && INTVAL (bl
->biv
->add_val
) == -1)
6186 REG_NOTES (PREV_INSN (loop_end
))
6187 = gen_rtx_EXPR_LIST (REG_NONNEG
, NULL_RTX
,
6188 REG_NOTES (PREV_INSN (loop_end
)));
6195 else if (num_mem_sets
<= 1)
6197 /* Try to change inc to dec, so can apply above optimization. */
6199 all registers modified are induction variables or invariant,
6200 all memory references have non-overlapping addresses
6201 (obviously true if only one write)
6202 allow 2 insns for the compare/jump at the end of the loop. */
6203 /* Also, we must avoid any instructions which use both the reversed
6204 biv and another biv. Such instructions will fail if the loop is
6205 reversed. We meet this condition by requiring that either
6206 no_use_except_counting is true, or else that there is only
6208 int num_nonfixed_reads
= 0;
6209 /* 1 if the iteration var is used only to count iterations. */
6210 int no_use_except_counting
= 0;
6211 /* 1 if the loop has no memory store, or it has a single memory store
6212 which is reversible. */
6213 int reversible_mem_store
= 1;
6215 for (p
= loop_start
; p
!= loop_end
; p
= NEXT_INSN (p
))
6216 if (GET_RTX_CLASS (GET_CODE (p
)) == 'i')
6217 num_nonfixed_reads
+= count_nonfixed_reads (PATTERN (p
));
6219 if (bl
->giv_count
== 0
6220 && ! loop_number_exit_count
[uid_loop_num
[INSN_UID (loop_start
)]])
6222 rtx bivreg
= regno_reg_rtx
[bl
->regno
];
6224 /* If there are no givs for this biv, and the only exit is the
6225 fall through at the end of the the loop, then
6226 see if perhaps there are no uses except to count. */
6227 no_use_except_counting
= 1;
6228 for (p
= loop_start
; p
!= loop_end
; p
= NEXT_INSN (p
))
6229 if (GET_RTX_CLASS (GET_CODE (p
)) == 'i')
6231 rtx set
= single_set (p
);
6233 if (set
&& GET_CODE (SET_DEST (set
)) == REG
6234 && REGNO (SET_DEST (set
)) == bl
->regno
)
6235 /* An insn that sets the biv is okay. */
6237 else if (p
== prev_nonnote_insn (prev_nonnote_insn (loop_end
))
6238 || p
== prev_nonnote_insn (loop_end
))
6239 /* Don't bother about the end test. */
6241 else if (reg_mentioned_p (bivreg
, PATTERN (p
)))
6242 /* Any other use of the biv is no good. */
6244 no_use_except_counting
= 0;
6250 /* If the loop has a single store, and the destination address is
6251 invariant, then we can't reverse the loop, because this address
6252 might then have the wrong value at loop exit.
6253 This would work if the source was invariant also, however, in that
6254 case, the insn should have been moved out of the loop. */
6256 if (num_mem_sets
== 1)
6257 reversible_mem_store
6258 = (! unknown_address_altered
6259 && ! invariant_p (XEXP (loop_store_mems
[0], 0)));
6261 /* This code only acts for innermost loops. Also it simplifies
6262 the memory address check by only reversing loops with
6263 zero or one memory access.
6264 Two memory accesses could involve parts of the same array,
6265 and that can't be reversed. */
6267 if (num_nonfixed_reads
<= 1
6269 && !loop_has_volatile
6270 && reversible_mem_store
6271 && (no_use_except_counting
6272 || ((bl
->giv_count
+ bl
->biv_count
+ num_mem_sets
6273 + num_movables
+ compare_and_branch
== insn_count
)
6274 && (bl
== loop_iv_list
&& bl
->next
== 0))))
6278 /* Loop can be reversed. */
6279 if (loop_dump_stream
)
6280 fprintf (loop_dump_stream
, "Can reverse loop\n");
6282 /* Now check other conditions:
6284 The increment must be a constant, as must the initial value,
6285 and the comparison code must be LT.
6287 This test can probably be improved since +/- 1 in the constant
6288 can be obtained by changing LT to LE and vice versa; this is
6292 && GET_CODE (XEXP (comparison
, 1)) == CONST_INT
6293 /* LE gets turned into LT */
6294 && GET_CODE (comparison
) == LT
6295 && GET_CODE (bl
->initial_value
) == CONST_INT
)
6297 HOST_WIDE_INT add_val
, comparison_val
;
6300 add_val
= INTVAL (bl
->biv
->add_val
);
6301 comparison_val
= INTVAL (XEXP (comparison
, 1));
6302 initial_value
= bl
->initial_value
;
6304 /* Normalize the initial value if it is an integer and
6305 has no other use except as a counter. This will allow
6306 a few more loops to be reversed. */
6307 if (no_use_except_counting
6308 && GET_CODE (initial_value
) == CONST_INT
)
6310 comparison_val
= comparison_val
- INTVAL (bl
->initial_value
);
6311 /* Check for overflow. If comparison_val ends up as a
6312 negative value, then we can't reverse the loop. */
6313 if (comparison_val
>= 0)
6314 initial_value
= const0_rtx
;
6317 /* If the initial value is not zero, or if the comparison
6318 value is not an exact multiple of the increment, then we
6319 can not reverse this loop. */
6320 if (initial_value
!= const0_rtx
6321 || (comparison_val
% add_val
) != 0)
6324 /* Reset these in case we normalized the initial value
6325 and comparison value above. */
6326 bl
->initial_value
= initial_value
;
6327 XEXP (comparison
, 1) = GEN_INT (comparison_val
);
6329 /* Register will always be nonnegative, with value
6330 0 on last iteration if loop reversed */
6332 /* Save some info needed to produce the new insns. */
6333 reg
= bl
->biv
->dest_reg
;
6334 jump_label
= XEXP (SET_SRC (PATTERN (PREV_INSN (loop_end
))), 1);
6335 if (jump_label
== pc_rtx
)
6336 jump_label
= XEXP (SET_SRC (PATTERN (PREV_INSN (loop_end
))), 2);
6337 new_add_val
= GEN_INT (- INTVAL (bl
->biv
->add_val
));
6339 final_value
= XEXP (comparison
, 1);
6340 start_value
= GEN_INT (INTVAL (XEXP (comparison
, 1))
6341 - INTVAL (bl
->biv
->add_val
));
6343 /* Initialize biv to start_value before loop start.
6344 The old initializing insn will be deleted as a
6345 dead store by flow.c. */
6346 emit_insn_before (gen_move_insn (reg
, start_value
), loop_start
);
6348 /* Add insn to decrement register, and delete insn
6349 that incremented the register. */
6350 p
= emit_insn_before (gen_add2_insn (reg
, new_add_val
),
6352 delete_insn (bl
->biv
->insn
);
6354 /* Update biv info to reflect its new status. */
6356 bl
->initial_value
= start_value
;
6357 bl
->biv
->add_val
= new_add_val
;
6359 /* Inc LABEL_NUSES so that delete_insn will
6360 not delete the label. */
6361 LABEL_NUSES (XEXP (jump_label
, 0)) ++;
6363 /* Emit an insn after the end of the loop to set the biv's
6364 proper exit value if it is used anywhere outside the loop. */
6365 if ((REGNO_LAST_UID (bl
->regno
) != INSN_UID (first_compare
))
6367 || REGNO_FIRST_UID (bl
->regno
) != INSN_UID (bl
->init_insn
))
6368 emit_insn_after (gen_move_insn (reg
, final_value
),
6371 /* Delete compare/branch at end of loop. */
6372 delete_insn (PREV_INSN (loop_end
));
6373 if (compare_and_branch
== 2)
6374 delete_insn (first_compare
);
6376 /* Add new compare/branch insn at end of loop. */
6378 emit_cmp_insn (reg
, const0_rtx
, GE
, NULL_RTX
,
6379 GET_MODE (reg
), 0, 0);
6380 emit_jump_insn (gen_bge (XEXP (jump_label
, 0)));
6381 tem
= gen_sequence ();
6383 emit_jump_insn_before (tem
, loop_end
);
6385 for (tem
= PREV_INSN (loop_end
);
6386 tem
&& GET_CODE (tem
) != JUMP_INSN
; tem
= PREV_INSN (tem
))
6390 JUMP_LABEL (tem
) = XEXP (jump_label
, 0);
6392 /* Increment of LABEL_NUSES done above. */
6393 /* Register is now always nonnegative,
6394 so add REG_NONNEG note to the branch. */
6395 REG_NOTES (tem
) = gen_rtx_EXPR_LIST (REG_NONNEG
, NULL_RTX
,
6401 /* Mark that this biv has been reversed. Each giv which depends
6402 on this biv, and which is also live past the end of the loop
6403 will have to be fixed up. */
6407 if (loop_dump_stream
)
6408 fprintf (loop_dump_stream
,
6409 "Reversed loop and added reg_nonneg\n");
6419 /* Verify whether the biv BL appears to be eliminable,
6420 based on the insns in the loop that refer to it.
6421 LOOP_START is the first insn of the loop, and END is the end insn.
6423 If ELIMINATE_P is non-zero, actually do the elimination.
6425 THRESHOLD and INSN_COUNT are from loop_optimize and are used to
6426 determine whether invariant insns should be placed inside or at the
6427 start of the loop. */
6430 maybe_eliminate_biv (bl
, loop_start
, end
, eliminate_p
, threshold
, insn_count
)
6431 struct iv_class
*bl
;
6435 int threshold
, insn_count
;
6437 rtx reg
= bl
->biv
->dest_reg
;
6440 /* Scan all insns in the loop, stopping if we find one that uses the
6441 biv in a way that we cannot eliminate. */
6443 for (p
= loop_start
; p
!= end
; p
= NEXT_INSN (p
))
6445 enum rtx_code code
= GET_CODE (p
);
6446 rtx where
= threshold
>= insn_count
? loop_start
: p
;
6448 if ((code
== INSN
|| code
== JUMP_INSN
|| code
== CALL_INSN
)
6449 && reg_mentioned_p (reg
, PATTERN (p
))
6450 && ! maybe_eliminate_biv_1 (PATTERN (p
), p
, bl
, eliminate_p
, where
))
6452 if (loop_dump_stream
)
6453 fprintf (loop_dump_stream
,
6454 "Cannot eliminate biv %d: biv used in insn %d.\n",
6455 bl
->regno
, INSN_UID (p
));
6462 if (loop_dump_stream
)
6463 fprintf (loop_dump_stream
, "biv %d %s eliminated.\n",
6464 bl
->regno
, eliminate_p
? "was" : "can be");
6471 /* If BL appears in X (part of the pattern of INSN), see if we can
6472 eliminate its use. If so, return 1. If not, return 0.
6474 If BIV does not appear in X, return 1.
6476 If ELIMINATE_P is non-zero, actually do the elimination. WHERE indicates
6477 where extra insns should be added. Depending on how many items have been
6478 moved out of the loop, it will either be before INSN or at the start of
6482 maybe_eliminate_biv_1 (x
, insn
, bl
, eliminate_p
, where
)
6484 struct iv_class
*bl
;
6488 enum rtx_code code
= GET_CODE (x
);
6489 rtx reg
= bl
->biv
->dest_reg
;
6490 enum machine_mode mode
= GET_MODE (reg
);
6491 struct induction
*v
;
6503 /* If we haven't already been able to do something with this BIV,
6504 we can't eliminate it. */
6510 /* If this sets the BIV, it is not a problem. */
6511 if (SET_DEST (x
) == reg
)
6514 /* If this is an insn that defines a giv, it is also ok because
6515 it will go away when the giv is reduced. */
6516 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
6517 if (v
->giv_type
== DEST_REG
&& SET_DEST (x
) == v
->dest_reg
)
6521 if (SET_DEST (x
) == cc0_rtx
&& SET_SRC (x
) == reg
)
6523 /* Can replace with any giv that was reduced and
6524 that has (MULT_VAL != 0) and (ADD_VAL == 0).
6525 Require a constant for MULT_VAL, so we know it's nonzero.
6526 ??? We disable this optimization to avoid potential
6529 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
6530 if (CONSTANT_P (v
->mult_val
) && v
->mult_val
!= const0_rtx
6531 && v
->add_val
== const0_rtx
6532 && ! v
->ignore
&& ! v
->maybe_dead
&& v
->always_computable
6536 /* If the giv V had the auto-inc address optimization applied
6537 to it, and INSN occurs between the giv insn and the biv
6538 insn, then we must adjust the value used here.
6539 This is rare, so we don't bother to do so. */
6541 && ((INSN_LUID (v
->insn
) < INSN_LUID (insn
)
6542 && INSN_LUID (insn
) < INSN_LUID (bl
->biv
->insn
))
6543 || (INSN_LUID (v
->insn
) > INSN_LUID (insn
)
6544 && INSN_LUID (insn
) > INSN_LUID (bl
->biv
->insn
))))
6550 /* If the giv has the opposite direction of change,
6551 then reverse the comparison. */
6552 if (INTVAL (v
->mult_val
) < 0)
6553 new = gen_rtx_COMPARE (GET_MODE (v
->new_reg
),
6554 const0_rtx
, v
->new_reg
);
6558 /* We can probably test that giv's reduced reg. */
6559 if (validate_change (insn
, &SET_SRC (x
), new, 0))
6563 /* Look for a giv with (MULT_VAL != 0) and (ADD_VAL != 0);
6564 replace test insn with a compare insn (cmp REDUCED_GIV ADD_VAL).
6565 Require a constant for MULT_VAL, so we know it's nonzero.
6566 ??? Do this only if ADD_VAL is a pointer to avoid a potential
6567 overflow problem. */
6569 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
6570 if (CONSTANT_P (v
->mult_val
) && v
->mult_val
!= const0_rtx
6571 && ! v
->ignore
&& ! v
->maybe_dead
&& v
->always_computable
6573 && (GET_CODE (v
->add_val
) == SYMBOL_REF
6574 || GET_CODE (v
->add_val
) == LABEL_REF
6575 || GET_CODE (v
->add_val
) == CONST
6576 || (GET_CODE (v
->add_val
) == REG
6577 && REGNO_POINTER_FLAG (REGNO (v
->add_val
)))))
6579 /* If the giv V had the auto-inc address optimization applied
6580 to it, and INSN occurs between the giv insn and the biv
6581 insn, then we must adjust the value used here.
6582 This is rare, so we don't bother to do so. */
6584 && ((INSN_LUID (v
->insn
) < INSN_LUID (insn
)
6585 && INSN_LUID (insn
) < INSN_LUID (bl
->biv
->insn
))
6586 || (INSN_LUID (v
->insn
) > INSN_LUID (insn
)
6587 && INSN_LUID (insn
) > INSN_LUID (bl
->biv
->insn
))))
6593 /* If the giv has the opposite direction of change,
6594 then reverse the comparison. */
6595 if (INTVAL (v
->mult_val
) < 0)
6596 new = gen_rtx_COMPARE (VOIDmode
, copy_rtx (v
->add_val
),
6599 new = gen_rtx_COMPARE (VOIDmode
, v
->new_reg
,
6600 copy_rtx (v
->add_val
));
6602 /* Replace biv with the giv's reduced register. */
6603 update_reg_last_use (v
->add_val
, insn
);
6604 if (validate_change (insn
, &SET_SRC (PATTERN (insn
)), new, 0))
6607 /* Insn doesn't support that constant or invariant. Copy it
6608 into a register (it will be a loop invariant.) */
6609 tem
= gen_reg_rtx (GET_MODE (v
->new_reg
));
6611 emit_insn_before (gen_move_insn (tem
, copy_rtx (v
->add_val
)),
6614 /* Substitute the new register for its invariant value in
6615 the compare expression. */
6616 XEXP (new, (INTVAL (v
->mult_val
) < 0) ? 0 : 1) = tem
;
6617 if (validate_change (insn
, &SET_SRC (PATTERN (insn
)), new, 0))
6626 case GT
: case GE
: case GTU
: case GEU
:
6627 case LT
: case LE
: case LTU
: case LEU
:
6628 /* See if either argument is the biv. */
6629 if (XEXP (x
, 0) == reg
)
6630 arg
= XEXP (x
, 1), arg_operand
= 1;
6631 else if (XEXP (x
, 1) == reg
)
6632 arg
= XEXP (x
, 0), arg_operand
= 0;
6636 if (CONSTANT_P (arg
))
6638 /* First try to replace with any giv that has constant positive
6639 mult_val and constant add_val. We might be able to support
6640 negative mult_val, but it seems complex to do it in general. */
6642 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
6643 if (CONSTANT_P (v
->mult_val
) && INTVAL (v
->mult_val
) > 0
6644 && (GET_CODE (v
->add_val
) == SYMBOL_REF
6645 || GET_CODE (v
->add_val
) == LABEL_REF
6646 || GET_CODE (v
->add_val
) == CONST
6647 || (GET_CODE (v
->add_val
) == REG
6648 && REGNO_POINTER_FLAG (REGNO (v
->add_val
))))
6649 && ! v
->ignore
&& ! v
->maybe_dead
&& v
->always_computable
6652 /* If the giv V had the auto-inc address optimization applied
6653 to it, and INSN occurs between the giv insn and the biv
6654 insn, then we must adjust the value used here.
6655 This is rare, so we don't bother to do so. */
6657 && ((INSN_LUID (v
->insn
) < INSN_LUID (insn
)
6658 && INSN_LUID (insn
) < INSN_LUID (bl
->biv
->insn
))
6659 || (INSN_LUID (v
->insn
) > INSN_LUID (insn
)
6660 && INSN_LUID (insn
) > INSN_LUID (bl
->biv
->insn
))))
6666 /* Replace biv with the giv's reduced reg. */
6667 XEXP (x
, 1-arg_operand
) = v
->new_reg
;
6669 /* If all constants are actually constant integers and
6670 the derived constant can be directly placed in the COMPARE,
6672 if (GET_CODE (arg
) == CONST_INT
6673 && GET_CODE (v
->mult_val
) == CONST_INT
6674 && GET_CODE (v
->add_val
) == CONST_INT
6675 && validate_change (insn
, &XEXP (x
, arg_operand
),
6676 GEN_INT (INTVAL (arg
)
6677 * INTVAL (v
->mult_val
)
6678 + INTVAL (v
->add_val
)), 0))
6681 /* Otherwise, load it into a register. */
6682 tem
= gen_reg_rtx (mode
);
6683 emit_iv_add_mult (arg
, v
->mult_val
, v
->add_val
, tem
, where
);
6684 if (validate_change (insn
, &XEXP (x
, arg_operand
), tem
, 0))
6687 /* If that failed, put back the change we made above. */
6688 XEXP (x
, 1-arg_operand
) = reg
;
6691 /* Look for giv with positive constant mult_val and nonconst add_val.
6692 Insert insns to calculate new compare value.
6693 ??? Turn this off due to possible overflow. */
6695 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
6696 if (CONSTANT_P (v
->mult_val
) && INTVAL (v
->mult_val
) > 0
6697 && ! v
->ignore
&& ! v
->maybe_dead
&& v
->always_computable
6703 /* If the giv V had the auto-inc address optimization applied
6704 to it, and INSN occurs between the giv insn and the biv
6705 insn, then we must adjust the value used here.
6706 This is rare, so we don't bother to do so. */
6708 && ((INSN_LUID (v
->insn
) < INSN_LUID (insn
)
6709 && INSN_LUID (insn
) < INSN_LUID (bl
->biv
->insn
))
6710 || (INSN_LUID (v
->insn
) > INSN_LUID (insn
)
6711 && INSN_LUID (insn
) > INSN_LUID (bl
->biv
->insn
))))
6717 tem
= gen_reg_rtx (mode
);
6719 /* Replace biv with giv's reduced register. */
6720 validate_change (insn
, &XEXP (x
, 1 - arg_operand
),
6723 /* Compute value to compare against. */
6724 emit_iv_add_mult (arg
, v
->mult_val
, v
->add_val
, tem
, where
);
6725 /* Use it in this insn. */
6726 validate_change (insn
, &XEXP (x
, arg_operand
), tem
, 1);
6727 if (apply_change_group ())
6731 else if (GET_CODE (arg
) == REG
|| GET_CODE (arg
) == MEM
)
6733 if (invariant_p (arg
) == 1)
6735 /* Look for giv with constant positive mult_val and nonconst
6736 add_val. Insert insns to compute new compare value.
6737 ??? Turn this off due to possible overflow. */
6739 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
6740 if (CONSTANT_P (v
->mult_val
) && INTVAL (v
->mult_val
) > 0
6741 && ! v
->ignore
&& ! v
->maybe_dead
&& v
->always_computable
6747 /* If the giv V had the auto-inc address optimization applied
6748 to it, and INSN occurs between the giv insn and the biv
6749 insn, then we must adjust the value used here.
6750 This is rare, so we don't bother to do so. */
6752 && ((INSN_LUID (v
->insn
) < INSN_LUID (insn
)
6753 && INSN_LUID (insn
) < INSN_LUID (bl
->biv
->insn
))
6754 || (INSN_LUID (v
->insn
) > INSN_LUID (insn
)
6755 && INSN_LUID (insn
) > INSN_LUID (bl
->biv
->insn
))))
6761 tem
= gen_reg_rtx (mode
);
6763 /* Replace biv with giv's reduced register. */
6764 validate_change (insn
, &XEXP (x
, 1 - arg_operand
),
6767 /* Compute value to compare against. */
6768 emit_iv_add_mult (arg
, v
->mult_val
, v
->add_val
,
6770 validate_change (insn
, &XEXP (x
, arg_operand
), tem
, 1);
6771 if (apply_change_group ())
6776 /* This code has problems. Basically, you can't know when
6777 seeing if we will eliminate BL, whether a particular giv
6778 of ARG will be reduced. If it isn't going to be reduced,
6779 we can't eliminate BL. We can try forcing it to be reduced,
6780 but that can generate poor code.
6782 The problem is that the benefit of reducing TV, below should
6783 be increased if BL can actually be eliminated, but this means
6784 we might have to do a topological sort of the order in which
6785 we try to process biv. It doesn't seem worthwhile to do
6786 this sort of thing now. */
6789 /* Otherwise the reg compared with had better be a biv. */
6790 if (GET_CODE (arg
) != REG
6791 || reg_iv_type
[REGNO (arg
)] != BASIC_INDUCT
)
6794 /* Look for a pair of givs, one for each biv,
6795 with identical coefficients. */
6796 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
6798 struct induction
*tv
;
6800 if (v
->ignore
|| v
->maybe_dead
|| v
->mode
!= mode
)
6803 for (tv
= reg_biv_class
[REGNO (arg
)]->giv
; tv
; tv
= tv
->next_iv
)
6804 if (! tv
->ignore
&& ! tv
->maybe_dead
6805 && rtx_equal_p (tv
->mult_val
, v
->mult_val
)
6806 && rtx_equal_p (tv
->add_val
, v
->add_val
)
6807 && tv
->mode
== mode
)
6809 /* If the giv V had the auto-inc address optimization applied
6810 to it, and INSN occurs between the giv insn and the biv
6811 insn, then we must adjust the value used here.
6812 This is rare, so we don't bother to do so. */
6814 && ((INSN_LUID (v
->insn
) < INSN_LUID (insn
)
6815 && INSN_LUID (insn
) < INSN_LUID (bl
->biv
->insn
))
6816 || (INSN_LUID (v
->insn
) > INSN_LUID (insn
)
6817 && INSN_LUID (insn
) > INSN_LUID (bl
->biv
->insn
))))
6823 /* Replace biv with its giv's reduced reg. */
6824 XEXP (x
, 1-arg_operand
) = v
->new_reg
;
6825 /* Replace other operand with the other giv's
6827 XEXP (x
, arg_operand
) = tv
->new_reg
;
6834 /* If we get here, the biv can't be eliminated. */
6838 /* If this address is a DEST_ADDR giv, it doesn't matter if the
6839 biv is used in it, since it will be replaced. */
6840 for (v
= bl
->giv
; v
; v
= v
->next_iv
)
6841 if (v
->giv_type
== DEST_ADDR
&& v
->location
== &XEXP (x
, 0))
6849 /* See if any subexpression fails elimination. */
6850 fmt
= GET_RTX_FORMAT (code
);
6851 for (i
= GET_RTX_LENGTH (code
) - 1; i
>= 0; i
--)
6856 if (! maybe_eliminate_biv_1 (XEXP (x
, i
), insn
, bl
,
6857 eliminate_p
, where
))
6862 for (j
= XVECLEN (x
, i
) - 1; j
>= 0; j
--)
6863 if (! maybe_eliminate_biv_1 (XVECEXP (x
, i
, j
), insn
, bl
,
6864 eliminate_p
, where
))
6873 /* Return nonzero if the last use of REG
6874 is in an insn following INSN in the same basic block. */
6877 last_use_this_basic_block (reg
, insn
)
6883 n
&& GET_CODE (n
) != CODE_LABEL
&& GET_CODE (n
) != JUMP_INSN
;
6886 if (REGNO_LAST_UID (REGNO (reg
)) == INSN_UID (n
))
6892 /* Called via `note_stores' to record the initial value of a biv. Here we
6893 just record the location of the set and process it later. */
6896 record_initial (dest
, set
)
6900 struct iv_class
*bl
;
6902 if (GET_CODE (dest
) != REG
6903 || REGNO (dest
) >= max_reg_before_loop
6904 || reg_iv_type
[REGNO (dest
)] != BASIC_INDUCT
)
6907 bl
= reg_biv_class
[REGNO (dest
)];
6909 /* If this is the first set found, record it. */
6910 if (bl
->init_insn
== 0)
6912 bl
->init_insn
= note_insn
;
6917 /* If any of the registers in X are "old" and currently have a last use earlier
6918 than INSN, update them to have a last use of INSN. Their actual last use
6919 will be the previous insn but it will not have a valid uid_luid so we can't
6923 update_reg_last_use (x
, insn
)
6927 /* Check for the case where INSN does not have a valid luid. In this case,
6928 there is no need to modify the regno_last_uid, as this can only happen
6929 when code is inserted after the loop_end to set a pseudo's final value,
6930 and hence this insn will never be the last use of x. */
6931 if (GET_CODE (x
) == REG
&& REGNO (x
) < max_reg_before_loop
6932 && INSN_UID (insn
) < max_uid_for_loop
6933 && uid_luid
[REGNO_LAST_UID (REGNO (x
))] < uid_luid
[INSN_UID (insn
)])
6934 REGNO_LAST_UID (REGNO (x
)) = INSN_UID (insn
);
6938 register char *fmt
= GET_RTX_FORMAT (GET_CODE (x
));
6939 for (i
= GET_RTX_LENGTH (GET_CODE (x
)) - 1; i
>= 0; i
--)
6942 update_reg_last_use (XEXP (x
, i
), insn
);
6943 else if (fmt
[i
] == 'E')
6944 for (j
= XVECLEN (x
, i
) - 1; j
>= 0; j
--)
6945 update_reg_last_use (XVECEXP (x
, i
, j
), insn
);
6950 /* Given a jump insn JUMP, return the condition that will cause it to branch
6951 to its JUMP_LABEL. If the condition cannot be understood, or is an
6952 inequality floating-point comparison which needs to be reversed, 0 will
6955 If EARLIEST is non-zero, it is a pointer to a place where the earliest
6956 insn used in locating the condition was found. If a replacement test
6957 of the condition is desired, it should be placed in front of that
6958 insn and we will be sure that the inputs are still valid.
6960 The condition will be returned in a canonical form to simplify testing by
6961 callers. Specifically:
6963 (1) The code will always be a comparison operation (EQ, NE, GT, etc.).
6964 (2) Both operands will be machine operands; (cc0) will have been replaced.
6965 (3) If an operand is a constant, it will be the second operand.
6966 (4) (LE x const) will be replaced with (LT x <const+1>) and similarly
6967 for GE, GEU, and LEU. */
6970 get_condition (jump
, earliest
)
6979 int reverse_code
= 0;
6980 int did_reverse_condition
= 0;
6982 /* If this is not a standard conditional jump, we can't parse it. */
6983 if (GET_CODE (jump
) != JUMP_INSN
6984 || ! condjump_p (jump
) || simplejump_p (jump
))
6987 code
= GET_CODE (XEXP (SET_SRC (PATTERN (jump
)), 0));
6988 op0
= XEXP (XEXP (SET_SRC (PATTERN (jump
)), 0), 0);
6989 op1
= XEXP (XEXP (SET_SRC (PATTERN (jump
)), 0), 1);
6994 /* If this branches to JUMP_LABEL when the condition is false, reverse
6996 if (GET_CODE (XEXP (SET_SRC (PATTERN (jump
)), 2)) == LABEL_REF
6997 && XEXP (XEXP (SET_SRC (PATTERN (jump
)), 2), 0) == JUMP_LABEL (jump
))
6998 code
= reverse_condition (code
), did_reverse_condition
^= 1;
7000 /* If we are comparing a register with zero, see if the register is set
7001 in the previous insn to a COMPARE or a comparison operation. Perform
7002 the same tests as a function of STORE_FLAG_VALUE as find_comparison_args
7005 while (GET_RTX_CLASS (code
) == '<' && op1
== CONST0_RTX (GET_MODE (op0
)))
7007 /* Set non-zero when we find something of interest. */
7011 /* If comparison with cc0, import actual comparison from compare
7015 if ((prev
= prev_nonnote_insn (prev
)) == 0
7016 || GET_CODE (prev
) != INSN
7017 || (set
= single_set (prev
)) == 0
7018 || SET_DEST (set
) != cc0_rtx
)
7021 op0
= SET_SRC (set
);
7022 op1
= CONST0_RTX (GET_MODE (op0
));
7028 /* If this is a COMPARE, pick up the two things being compared. */
7029 if (GET_CODE (op0
) == COMPARE
)
7031 op1
= XEXP (op0
, 1);
7032 op0
= XEXP (op0
, 0);
7035 else if (GET_CODE (op0
) != REG
)
7038 /* Go back to the previous insn. Stop if it is not an INSN. We also
7039 stop if it isn't a single set or if it has a REG_INC note because
7040 we don't want to bother dealing with it. */
7042 if ((prev
= prev_nonnote_insn (prev
)) == 0
7043 || GET_CODE (prev
) != INSN
7044 || FIND_REG_INC_NOTE (prev
, 0)
7045 || (set
= single_set (prev
)) == 0)
7048 /* If this is setting OP0, get what it sets it to if it looks
7050 if (rtx_equal_p (SET_DEST (set
), op0
))
7052 enum machine_mode inner_mode
= GET_MODE (SET_SRC (set
));
7054 if ((GET_CODE (SET_SRC (set
)) == COMPARE
7057 && GET_MODE_CLASS (inner_mode
) == MODE_INT
7058 && (GET_MODE_BITSIZE (inner_mode
)
7059 <= HOST_BITS_PER_WIDE_INT
)
7060 && (STORE_FLAG_VALUE
7061 & ((HOST_WIDE_INT
) 1
7062 << (GET_MODE_BITSIZE (inner_mode
) - 1))))
7063 #ifdef FLOAT_STORE_FLAG_VALUE
7065 && GET_MODE_CLASS (inner_mode
) == MODE_FLOAT
7066 && FLOAT_STORE_FLAG_VALUE
< 0)
7069 && GET_RTX_CLASS (GET_CODE (SET_SRC (set
))) == '<')))
7071 else if (((code
== EQ
7073 && (GET_MODE_BITSIZE (inner_mode
)
7074 <= HOST_BITS_PER_WIDE_INT
)
7075 && GET_MODE_CLASS (inner_mode
) == MODE_INT
7076 && (STORE_FLAG_VALUE
7077 & ((HOST_WIDE_INT
) 1
7078 << (GET_MODE_BITSIZE (inner_mode
) - 1))))
7079 #ifdef FLOAT_STORE_FLAG_VALUE
7081 && GET_MODE_CLASS (inner_mode
) == MODE_FLOAT
7082 && FLOAT_STORE_FLAG_VALUE
< 0)
7085 && GET_RTX_CLASS (GET_CODE (SET_SRC (set
))) == '<')
7087 /* We might have reversed a LT to get a GE here. But this wasn't
7088 actually the comparison of data, so we don't flag that we
7089 have had to reverse the condition. */
7090 did_reverse_condition
^= 1;
7098 else if (reg_set_p (op0
, prev
))
7099 /* If this sets OP0, but not directly, we have to give up. */
7104 if (GET_RTX_CLASS (GET_CODE (x
)) == '<')
7105 code
= GET_CODE (x
);
7108 code
= reverse_condition (code
);
7109 did_reverse_condition
^= 1;
7113 op0
= XEXP (x
, 0), op1
= XEXP (x
, 1);
7119 /* If constant is first, put it last. */
7120 if (CONSTANT_P (op0
))
7121 code
= swap_condition (code
), tem
= op0
, op0
= op1
, op1
= tem
;
7123 /* If OP0 is the result of a comparison, we weren't able to find what
7124 was really being compared, so fail. */
7125 if (GET_MODE_CLASS (GET_MODE (op0
)) == MODE_CC
)
7128 /* Canonicalize any ordered comparison with integers involving equality
7129 if we can do computations in the relevant mode and we do not
7132 if (GET_CODE (op1
) == CONST_INT
7133 && GET_MODE (op0
) != VOIDmode
7134 && GET_MODE_BITSIZE (GET_MODE (op0
)) <= HOST_BITS_PER_WIDE_INT
)
7136 HOST_WIDE_INT const_val
= INTVAL (op1
);
7137 unsigned HOST_WIDE_INT uconst_val
= const_val
;
7138 unsigned HOST_WIDE_INT max_val
7139 = (unsigned HOST_WIDE_INT
) GET_MODE_MASK (GET_MODE (op0
));
7144 if (const_val
!= max_val
>> 1)
7145 code
= LT
, op1
= GEN_INT (const_val
+ 1);
7148 /* When cross-compiling, const_val might be sign-extended from
7149 BITS_PER_WORD to HOST_BITS_PER_WIDE_INT */
7151 if ((const_val
& max_val
)
7152 != (((HOST_WIDE_INT
) 1
7153 << (GET_MODE_BITSIZE (GET_MODE (op0
)) - 1))))
7154 code
= GT
, op1
= GEN_INT (const_val
- 1);
7158 if (uconst_val
< max_val
)
7159 code
= LTU
, op1
= GEN_INT (uconst_val
+ 1);
7163 if (uconst_val
!= 0)
7164 code
= GTU
, op1
= GEN_INT (uconst_val
- 1);
7172 /* If this was floating-point and we reversed anything other than an
7173 EQ or NE, return zero. */
7174 if (TARGET_FLOAT_FORMAT
== IEEE_FLOAT_FORMAT
7175 && did_reverse_condition
&& code
!= NE
&& code
!= EQ
7177 && GET_MODE_CLASS (GET_MODE (op0
)) == MODE_FLOAT
)
7181 /* Never return CC0; return zero instead. */
7186 return gen_rtx_fmt_ee (code
, VOIDmode
, op0
, op1
);
7189 /* Similar to above routine, except that we also put an invariant last
7190 unless both operands are invariants. */
7193 get_condition_for_loop (x
)
7196 rtx comparison
= get_condition (x
, NULL_PTR
);
7199 || ! invariant_p (XEXP (comparison
, 0))
7200 || invariant_p (XEXP (comparison
, 1)))
7203 return gen_rtx_fmt_ee (swap_condition (GET_CODE (comparison
)), VOIDmode
,
7204 XEXP (comparison
, 1), XEXP (comparison
, 0));
7208 /* Analyze a loop in order to instrument it with the use of count register.
7209 loop_start and loop_end are the first and last insns of the loop.
7210 This function works in cooperation with insert_bct ().
7211 loop_can_insert_bct[loop_num] is set according to whether the optimization
7212 is applicable to the loop. When it is applicable, the following variables
7214 loop_start_value[loop_num]
7215 loop_comparison_value[loop_num]
7216 loop_increment[loop_num]
7217 loop_comparison_code[loop_num] */
7219 #ifdef HAVE_decrement_and_branch_on_count
7221 void analyze_loop_iterations (loop_start
, loop_end
)
7222 rtx loop_start
, loop_end
;
7224 rtx comparison
, comparison_value
;
7225 rtx iteration_var
, initial_value
, increment
;
7226 enum rtx_code comparison_code
;
7232 /* loop_variable mode */
7233 enum machine_mode original_mode
;
7235 /* find the number of the loop */
7236 int loop_num
= uid_loop_num
[INSN_UID (loop_start
)];
7238 /* we change our mind only when we are sure that loop will be instrumented */
7239 loop_can_insert_bct
[loop_num
] = 0;
7241 /* is the optimization suppressed. */
7242 if ( !flag_branch_on_count_reg
)
7245 /* make sure that count-reg is not in use */
7246 if (loop_used_count_register
[loop_num
]){
7247 if (loop_dump_stream
)
7248 fprintf (loop_dump_stream
,
7249 "analyze_loop_iterations %d: BCT instrumentation failed: count register already in use\n",
7254 /* make sure that the function has no indirect jumps. */
7255 if (indirect_jump_in_function
){
7256 if (loop_dump_stream
)
7257 fprintf (loop_dump_stream
,
7258 "analyze_loop_iterations %d: BCT instrumentation failed: indirect jump in function\n",
7263 /* make sure that the last loop insn is a conditional jump */
7264 last_loop_insn
= PREV_INSN (loop_end
);
7265 if (GET_CODE (last_loop_insn
) != JUMP_INSN
|| !condjump_p (last_loop_insn
)) {
7266 if (loop_dump_stream
)
7267 fprintf (loop_dump_stream
,
7268 "analyze_loop_iterations %d: BCT instrumentation failed: invalid jump at loop end\n",
7273 /* First find the iteration variable. If the last insn is a conditional
7274 branch, and the insn preceding it tests a register value, make that
7275 register the iteration variable. */
7277 /* We used to use prev_nonnote_insn here, but that fails because it might
7278 accidentally get the branch for a contained loop if the branch for this
7279 loop was deleted. We can only trust branches immediately before the
7282 comparison
= get_condition_for_loop (last_loop_insn
);
7283 /* ??? Get_condition may switch position of induction variable and
7284 invariant register when it canonicalizes the comparison. */
7286 if (comparison
== 0) {
7287 if (loop_dump_stream
)
7288 fprintf (loop_dump_stream
,
7289 "analyze_loop_iterations %d: BCT instrumentation failed: comparison not found\n",
7294 comparison_code
= GET_CODE (comparison
);
7295 iteration_var
= XEXP (comparison
, 0);
7296 comparison_value
= XEXP (comparison
, 1);
7298 original_mode
= GET_MODE (iteration_var
);
7299 if (GET_MODE_CLASS (original_mode
) != MODE_INT
7300 || GET_MODE_SIZE (original_mode
) != UNITS_PER_WORD
) {
7301 if (loop_dump_stream
)
7302 fprintf (loop_dump_stream
,
7303 "analyze_loop_iterations %d: BCT Instrumentation failed: loop variable not integer\n",
7308 /* get info about loop bounds and increment */
7309 iteration_info (iteration_var
, &initial_value
, &increment
,
7310 loop_start
, loop_end
);
7312 /* make sure that all required loop data were found */
7313 if (!(initial_value
&& increment
&& comparison_value
7314 && invariant_p (comparison_value
) && invariant_p (increment
)
7315 && ! indirect_jump_in_function
))
7317 if (loop_dump_stream
) {
7318 fprintf (loop_dump_stream
,
7319 "analyze_loop_iterations %d: BCT instrumentation failed because of wrong loop: ", loop_num
);
7320 if (!(initial_value
&& increment
&& comparison_value
)) {
7321 fprintf (loop_dump_stream
, "\tbounds not available: ");
7322 if ( ! initial_value
)
7323 fprintf (loop_dump_stream
, "initial ");
7325 fprintf (loop_dump_stream
, "increment ");
7326 if ( ! comparison_value
)
7327 fprintf (loop_dump_stream
, "comparison ");
7328 fprintf (loop_dump_stream
, "\n");
7330 if (!invariant_p (comparison_value
) || !invariant_p (increment
))
7331 fprintf (loop_dump_stream
, "\tloop bounds not invariant\n");
7336 /* make sure that the increment is constant */
7337 if (GET_CODE (increment
) != CONST_INT
) {
7338 if (loop_dump_stream
)
7339 fprintf (loop_dump_stream
,
7340 "analyze_loop_iterations %d: instrumentation failed: not arithmetic loop\n",
7345 /* make sure that the loop contains neither function call, nor jump on table.
7346 (the count register might be altered by the called function, and might
7347 be used for a branch on table). */
7348 for (insn
= loop_start
; insn
&& insn
!= loop_end
; insn
= NEXT_INSN (insn
)) {
7349 if (GET_CODE (insn
) == CALL_INSN
){
7350 if (loop_dump_stream
)
7351 fprintf (loop_dump_stream
,
7352 "analyze_loop_iterations %d: BCT instrumentation failed: function call in the loop\n",
7357 if (GET_CODE (insn
) == JUMP_INSN
7358 && (GET_CODE (PATTERN (insn
)) == ADDR_DIFF_VEC
7359 || GET_CODE (PATTERN (insn
)) == ADDR_VEC
)){
7360 if (loop_dump_stream
)
7361 fprintf (loop_dump_stream
,
7362 "analyze_loop_iterations %d: BCT instrumentation failed: computed branch in the loop\n",
7368 /* At this point, we are sure that the loop can be instrumented with BCT.
7369 Some of the loops, however, will not be instrumented - the final decision
7370 is taken by insert_bct () */
7371 if (loop_dump_stream
)
7372 fprintf (loop_dump_stream
,
7373 "analyze_loop_iterations: loop (luid =%d) can be BCT instrumented.\n",
7376 /* mark all enclosing loops that they cannot use count register */
7377 /* ???: In fact, since insert_bct may decide not to instrument this loop,
7378 marking here may prevent instrumenting an enclosing loop that could
7379 actually be instrumented. But since this is rare, it is safer to mark
7380 here in case the order of calling (analyze/insert)_bct would be changed. */
7381 for (i
=loop_num
; i
!= -1; i
= loop_outer_loop
[i
])
7382 loop_used_count_register
[i
] = 1;
7384 /* Set data structures which will be used by the instrumentation phase */
7385 loop_start_value
[loop_num
] = initial_value
;
7386 loop_comparison_value
[loop_num
] = comparison_value
;
7387 loop_increment
[loop_num
] = increment
;
7388 loop_comparison_code
[loop_num
] = comparison_code
;
7389 loop_can_insert_bct
[loop_num
] = 1;
7393 /* instrument loop for insertion of bct instruction. We distinguish between
7394 loops with compile-time bounds, to those with run-time bounds. The loop
7395 behaviour is analized according to the following characteristics/variables:
7397 ; comparison-value: the value to which the iteration counter is compared.
7398 ; initial-value: iteration-counter initial value.
7399 ; increment: iteration-counter increment.
7400 ; Computed variables:
7401 ; increment-direction: the sign of the increment.
7402 ; compare-direction: '1' for GT, GTE, '-1' for LT, LTE, '0' for NE.
7403 ; range-direction: sign (comparison-value - initial-value)
7404 We give up on the following cases:
7405 ; loop variable overflow.
7406 ; run-time loop bounds with comparison code NE.
7410 insert_bct (loop_start
, loop_end
)
7411 rtx loop_start
, loop_end
;
7413 rtx initial_value
, comparison_value
, increment
;
7414 enum rtx_code comparison_code
;
7416 int increment_direction
, compare_direction
;
7419 /* if the loop condition is <= or >=, the number of iteration
7420 is 1 more than the range of the bounds of the loop */
7421 int add_iteration
= 0;
7423 /* the only machine mode we work with - is the integer of the size that the
7425 enum machine_mode loop_var_mode
= SImode
;
7427 int loop_num
= uid_loop_num
[INSN_UID (loop_start
)];
7429 /* get loop-variables. No need to check that these are valid - already
7430 checked in analyze_loop_iterations (). */
7431 comparison_code
= loop_comparison_code
[loop_num
];
7432 initial_value
= loop_start_value
[loop_num
];
7433 comparison_value
= loop_comparison_value
[loop_num
];
7434 increment
= loop_increment
[loop_num
];
7436 /* check analyze_loop_iterations decision for this loop. */
7437 if (! loop_can_insert_bct
[loop_num
]){
7438 if (loop_dump_stream
)
7439 fprintf (loop_dump_stream
,
7440 "insert_bct: [%d] - was decided not to instrument by analyze_loop_iterations ()\n",
7445 /* It's impossible to instrument a competely unrolled loop. */
7446 if (loop_unroll_factor
[loop_num
] == -1)
7449 /* make sure that the last loop insn is a conditional jump .
7450 This check is repeated from analyze_loop_iterations (),
7451 because unrolling might have changed that. */
7452 if (GET_CODE (PREV_INSN (loop_end
)) != JUMP_INSN
7453 || !condjump_p (PREV_INSN (loop_end
))) {
7454 if (loop_dump_stream
)
7455 fprintf (loop_dump_stream
,
7456 "insert_bct: not instrumenting BCT because of invalid branch\n");
7460 /* fix increment in case loop was unrolled. */
7461 if (loop_unroll_factor
[loop_num
] > 1)
7462 increment
= GEN_INT ( INTVAL (increment
) * loop_unroll_factor
[loop_num
] );
7464 /* determine properties and directions of the loop */
7465 increment_direction
= (INTVAL (increment
) > 0) ? 1:-1;
7466 switch ( comparison_code
) {
7471 compare_direction
= 1;
7478 compare_direction
= -1;
7482 /* in this case we cannot know the number of iterations */
7483 if (loop_dump_stream
)
7484 fprintf (loop_dump_stream
,
7485 "insert_bct: %d: loop cannot be instrumented: == in condition\n",
7492 compare_direction
= 1;
7498 compare_direction
= -1;
7501 compare_direction
= 0;
7508 /* make sure that the loop does not end by an overflow */
7509 if (compare_direction
!= increment_direction
) {
7510 if (loop_dump_stream
)
7511 fprintf (loop_dump_stream
,
7512 "insert_bct: %d: loop cannot be instrumented: terminated by overflow\n",
7517 /* try to instrument the loop. */
7519 /* Handle the simpler case, where the bounds are known at compile time. */
7520 if (GET_CODE (initial_value
) == CONST_INT
&& GET_CODE (comparison_value
) == CONST_INT
)
7523 int increment_value_abs
= INTVAL (increment
) * increment_direction
;
7525 /* check the relation between compare-val and initial-val */
7526 int difference
= INTVAL (comparison_value
) - INTVAL (initial_value
);
7527 int range_direction
= (difference
> 0) ? 1 : -1;
7529 /* make sure the loop executes enough iterations to gain from BCT */
7530 if (difference
> -3 && difference
< 3) {
7531 if (loop_dump_stream
)
7532 fprintf (loop_dump_stream
,
7533 "insert_bct: loop %d not BCT instrumented: too small iteration count.\n",
7538 /* make sure that the loop executes at least once */
7539 if ((range_direction
== 1 && compare_direction
== -1)
7540 || (range_direction
== -1 && compare_direction
== 1))
7542 if (loop_dump_stream
)
7543 fprintf (loop_dump_stream
,
7544 "insert_bct: loop %d: does not iterate even once. Not instrumenting.\n",
7549 /* make sure that the loop does not end by an overflow (in compile time
7550 bounds we must have an additional check for overflow, because here
7551 we also support the compare code of 'NE'. */
7552 if (comparison_code
== NE
7553 && increment_direction
!= range_direction
) {
7554 if (loop_dump_stream
)
7555 fprintf (loop_dump_stream
,
7556 "insert_bct (compile time bounds): %d: loop not instrumented: terminated by overflow\n",
7561 /* Determine the number of iterations by:
7563 ; compare-val - initial-val + (increment -1) + additional-iteration
7564 ; num_iterations = -----------------------------------------------------------------
7567 difference
= (range_direction
> 0) ? difference
: -difference
;
7569 fprintf (stderr
, "difference is: %d\n", difference
); /* @*/
7570 fprintf (stderr
, "increment_value_abs is: %d\n", increment_value_abs
); /* @*/
7571 fprintf (stderr
, "add_iteration is: %d\n", add_iteration
); /* @*/
7572 fprintf (stderr
, "INTVAL (comparison_value) is: %d\n", INTVAL (comparison_value
)); /* @*/
7573 fprintf (stderr
, "INTVAL (initial_value) is: %d\n", INTVAL (initial_value
)); /* @*/
7576 if (increment_value_abs
== 0) {
7577 fprintf (stderr
, "insert_bct: error: increment == 0 !!!\n");
7580 n_iterations
= (difference
+ increment_value_abs
- 1 + add_iteration
)
7581 / increment_value_abs
;
7584 fprintf (stderr
, "number of iterations is: %d\n", n_iterations
); /* @*/
7586 instrument_loop_bct (loop_start
, loop_end
, GEN_INT (n_iterations
));
7588 /* Done with this loop. */
7592 /* Handle the more complex case, that the bounds are NOT known at compile time. */
7593 /* In this case we generate run_time calculation of the number of iterations */
7595 /* With runtime bounds, if the compare is of the form '!=' we give up */
7596 if (comparison_code
== NE
) {
7597 if (loop_dump_stream
)
7598 fprintf (loop_dump_stream
,
7599 "insert_bct: fail for loop %d: runtime bounds with != comparison\n",
7605 /* We rely on the existence of run-time guard to ensure that the
7606 loop executes at least once. */
7608 rtx iterations_num_reg
;
7610 int increment_value_abs
= INTVAL (increment
) * increment_direction
;
7612 /* make sure that the increment is a power of two, otherwise (an
7613 expensive) divide is needed. */
7614 if (exact_log2 (increment_value_abs
) == -1)
7616 if (loop_dump_stream
)
7617 fprintf (loop_dump_stream
,
7618 "insert_bct: not instrumenting BCT because the increment is not power of 2\n");
7622 /* compute the number of iterations */
7627 /* Again, the number of iterations is calculated by:
7629 ; compare-val - initial-val + (increment -1) + additional-iteration
7630 ; num_iterations = -----------------------------------------------------------------
7633 /* ??? Do we have to call copy_rtx here before passing rtx to
7635 if (compare_direction
> 0) {
7636 /* <, <= :the loop variable is increasing */
7637 temp_reg
= expand_binop (loop_var_mode
, sub_optab
, comparison_value
,
7638 initial_value
, NULL_RTX
, 0, OPTAB_LIB_WIDEN
);
7641 temp_reg
= expand_binop (loop_var_mode
, sub_optab
, initial_value
,
7642 comparison_value
, NULL_RTX
, 0, OPTAB_LIB_WIDEN
);
7645 if (increment_value_abs
- 1 + add_iteration
!= 0)
7646 temp_reg
= expand_binop (loop_var_mode
, add_optab
, temp_reg
,
7647 GEN_INT (increment_value_abs
- 1 + add_iteration
),
7648 NULL_RTX
, 0, OPTAB_LIB_WIDEN
);
7650 if (increment_value_abs
!= 1)
7652 /* ??? This will generate an expensive divide instruction for
7653 most targets. The original authors apparently expected this
7654 to be a shift, since they test for power-of-2 divisors above,
7655 but just naively generating a divide instruction will not give
7656 a shift. It happens to work for the PowerPC target because
7657 the rs6000.md file has a divide pattern that emits shifts.
7658 It will probably not work for any other target. */
7659 iterations_num_reg
= expand_binop (loop_var_mode
, sdiv_optab
,
7661 GEN_INT (increment_value_abs
),
7662 NULL_RTX
, 0, OPTAB_LIB_WIDEN
);
7665 iterations_num_reg
= temp_reg
;
7667 sequence
= gen_sequence ();
7669 emit_insn_before (sequence
, loop_start
);
7670 instrument_loop_bct (loop_start
, loop_end
, iterations_num_reg
);
7674 /* instrument loop by inserting a bct in it. This is done in the following way:
7675 1. A new register is created and assigned the hard register number of the count
7677 2. In the head of the loop the new variable is initialized by the value passed in the
7678 loop_num_iterations parameter.
7679 3. At the end of the loop, comparison of the register with 0 is generated.
7680 The created comparison follows the pattern defined for the
7681 decrement_and_branch_on_count insn, so this insn will be generated in assembly
7683 4. The compare&branch on the old variable is deleted. So, if the loop-variable was
7684 not used elsewhere, it will be eliminated by data-flow analisys. */
7687 instrument_loop_bct (loop_start
, loop_end
, loop_num_iterations
)
7688 rtx loop_start
, loop_end
;
7689 rtx loop_num_iterations
;
7691 rtx temp_reg1
, temp_reg2
;
7695 enum machine_mode loop_var_mode
= SImode
;
7697 if (HAVE_decrement_and_branch_on_count
)
7699 if (loop_dump_stream
)
7700 fprintf (loop_dump_stream
, "Loop: Inserting BCT\n");
7702 /* eliminate the check on the old variable */
7703 delete_insn (PREV_INSN (loop_end
));
7704 delete_insn (PREV_INSN (loop_end
));
7706 /* insert the label which will delimit the start of the loop */
7707 start_label
= gen_label_rtx ();
7708 emit_label_after (start_label
, loop_start
);
7710 /* insert initialization of the count register into the loop header */
7712 temp_reg1
= gen_reg_rtx (loop_var_mode
);
7713 emit_insn (gen_move_insn (temp_reg1
, loop_num_iterations
));
7715 /* this will be count register */
7716 temp_reg2
= gen_rtx_REG (loop_var_mode
, COUNT_REGISTER_REGNUM
);
7717 /* we have to move the value to the count register from an GPR
7718 because rtx pointed to by loop_num_iterations could contain
7719 expression which cannot be moved into count register */
7720 emit_insn (gen_move_insn (temp_reg2
, temp_reg1
));
7722 sequence
= gen_sequence ();
7724 emit_insn_after (sequence
, loop_start
);
7726 /* insert new comparison on the count register instead of the
7727 old one, generating the needed BCT pattern (that will be
7728 later recognized by assembly generation phase). */
7729 emit_jump_insn_before (gen_decrement_and_branch_on_count (temp_reg2
, start_label
),
7731 LABEL_NUSES (start_label
)++;
7735 #endif /* HAVE_decrement_and_branch_on_count */
7739 /* Scan the function and determine whether it has indirect (computed) jumps.
7741 This is taken mostly from flow.c; similar code exists elsewhere
7742 in the compiler. It may be useful to put this into rtlanal.c. */
7744 indirect_jump_in_function_p (start
)
7749 for (insn
= start
; insn
; insn
= NEXT_INSN (insn
))
7750 if (computed_jump_p (insn
))