]>
gcc.gnu.org Git - gcc.git/blob - gcc/config/tahoe/tahoe.h
4e42c220edd21cacf3c188f2a48fed4d42b4b960
1 /* Definitions of target machine for GNU compiler. Tahoe version.
2 Copyright (C) 1989, 1993, 1994 Free Software Foundation, Inc.
4 This file is part of GNU CC.
6 GNU CC is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2, or (at your option)
11 GNU CC is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with GNU CC; see the file COPYING. If not, write to
18 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
23 * Original port made at the University of Buffalo by Devon Bowen,
24 * Dale Wiles and Kevin Zachmann.
26 * HCX/UX version by Piet van Oostrum (piet@cs.ruu.nl)
28 * Performance hacking by Michael Tiemann (tiemann@cygnus.com)
31 /* define this for the HCX/UX version */
36 * Run-time Target Specification
40 /* no predefines, see Makefile and hcx-universe.c */
41 /* have cc1 print that this is the hcx version */
42 #define TARGET_VERSION printf (" (hcx)");
44 /* we want "tahoe" and "unix" defined for all future compilations */
45 #define CPP_PREDEFINES "-Dtahoe -Dunix -Asystem(unix) -Acpu(tahoe) -Amachine(tahoe)"
46 /* have cc1 print that this is the tahoe version */
47 #define TARGET_VERSION printf (" (tahoe)");
50 /* this is required in all tm files to hold flags */
52 extern int target_flags
;
54 /* Zero if it is safe to output .dfloat and .float pseudos. */
55 #define TARGET_HEX_FLOAT (target_flags & 1)
57 #define TARGET_DEFAULT 1
59 #define TARGET_SWITCHES \
61 {"no-hex-float", -1}, \
62 { "", TARGET_DEFAULT} }
69 /* This symbol was previously not mentioned, so apparently the tahoe
70 is little-endian for bits, or else doesn't care. */
71 #define BITS_BIG_ENDIAN 0
73 /* tahoe uses a big endian byte order */
75 #define BYTES_BIG_ENDIAN 1
77 /* tahoe uses a big endian word order */
79 #define WORDS_BIG_ENDIAN 1
81 /* standard byte size is usable on tahoe */
83 #define BITS_PER_UNIT 8
85 /* longs on the tahoe are 4 byte groups */
87 #define BITS_PER_WORD 32
89 /* from the last two params we get 4 bytes per word */
91 #define UNITS_PER_WORD 4
93 /* addresses are 32 bits (one word) */
95 #define POINTER_SIZE 32
97 /* all parameters line up on 32 boundaries */
99 #define PARM_BOUNDARY 32
101 /* stack should line up on 32 boundaries */
103 #define STACK_BOUNDARY 32
105 /* line functions up on 32 bits */
107 #define FUNCTION_BOUNDARY 32
109 /* the biggest alignment the tahoe needs in 32 bits */
111 #define BIGGEST_ALIGNMENT 32
113 /* we have to align after an 'int : 0' in a structure */
115 #define EMPTY_FIELD_BOUNDARY 32
118 /* structures must be made of full words */
120 #define STRUCTURE_SIZE_BOUNDARY 32
122 /* structures must be made of full bytes */
124 #define STRUCTURE_SIZE_BOUNDARY 8
127 /* tahoe is picky about data alignment */
129 #define STRICT_ALIGNMENT 1
131 /* keep things standard with pcc */
133 #define PCC_BITFIELD_TYPE_MATTERS 1
135 /* this section is borrowed from the vax version since the */
136 /* formats are the same in both of the architectures */
138 #define CHECK_FLOAT_VALUE(MODE, D, OVEFLOW) \
140 (D) = 1.7014117331926443e+38; \
141 else if ((MODE) == SFmode) \
143 if ((D) > 1.7014117331926443e+38) \
144 (OVERFLOW) = 1, (D) = 1.7014117331926443e+38; \
145 else if ((D) < -1.7014117331926443e+38) \
146 (OVERFLOW) = 1, (D) = -1.7014117331926443e+38; \
147 else if (((D) > 0) && ((D) < 2.9387358770557188e-39)) \
148 (OVERFLOW) = 1, (D) = 0.0; \
149 else if (((D) < 0) && ((D) > -2.9387358770557188e-39)) \
150 (OVERFLOW) = 1, (D) = 0.0; \
158 /* define 15 general regs plus one for the floating point reg (FPP) */
160 #define FIRST_PSEUDO_REGISTER 17
162 /* let the compiler know what the fp, sp and pc are */
164 #define FIXED_REGISTERS {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0}
166 /* lots of regs aren't guaranteed to return from a call. The FPP reg */
167 /* must be included in these since it can't be saved by the reg mask */
169 #define CALL_USED_REGISTERS {1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1}
171 /* A single fp reg can handle any type of float.
172 CPU regs hold just 32 bits. */
174 #define HARD_REGNO_NREGS(REGNO, MODE) \
175 (REGNO != 16 ? ((GET_MODE_SIZE(MODE)+UNITS_PER_WORD-1) / UNITS_PER_WORD) \
176 : GET_MODE_NUNITS ((MODE)))
178 /* any mode greater than 4 bytes (doubles) can only go in an even regs */
179 /* and the FPP can only hold SFmode and DFmode */
181 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
183 ? (GET_MODE_UNIT_SIZE (MODE) <= 4 ? 1 : (REGNO % 2 - 1)) \
184 : ((MODE) == SFmode || (MODE) == DFmode \
185 || (MODE) == SCmode || (MODE) == DCmode))
187 /* if mode1 or mode2, but not both, are doubles then modes cannot be tied */
189 #define MODES_TIEABLE_P(MODE1, MODE2) \
190 (((MODE1) == DFmode || (MODE1) == DCmode) \
191 == ((MODE2) == DFmode || (MODE2) == DCmode))
193 /* return nonzero if register variable of mode MODE is not
194 a priori a bad idea. Used only if defined. */
195 #define MODE_OK_FOR_USERVAR(MODE) \
198 /* the program counter is reg 15 */
202 /* the stack pointer is reg 14 */
204 #define STACK_POINTER_REGNUM 14
206 /* the frame pointer is reg 13 */
208 #define FRAME_POINTER_REGNUM 13
210 /* tahoe does require an fp */
212 #define FRAME_POINTER_REQUIRED 1
214 /* since tahoe doesn't have a argument pointer, make it the fp */
216 #define ARG_POINTER_REGNUM 13
218 /* this isn't currently used since C doesn't support this feature */
220 #define STATIC_CHAIN_REGNUM 0
222 /* we'll use reg 1 for structure passing cause the destination */
223 /* of the eventual movblk requires it to be there anyway. */
225 #define STRUCT_VALUE_REGNUM 1
232 /* tahoe has two types of regs. GENERAL_REGS are all the regs up */
233 /* to number 15. FPP_REG is the special floating point processor */
234 /* register class (only one reg). */
236 enum reg_class
{NO_REGS
,GENERAL_REGS
,FPP_REG
,ALL_REGS
,LIM_REG_CLASSES
};
238 /* defines the number of reg classes. */
240 #define N_REG_CLASSES (int) LIM_REG_CLASSES
242 /* this defines what the classes are officially named for debugging */
244 #define REG_CLASS_NAMES \
245 {"NO_REGS","GENERAL_REGS","FPP_REG","ALL_REGS"}
247 /* set general regs to be the first 16 regs and the fpp reg to be 17th */
249 #define REG_CLASS_CONTENTS {0,0xffff,0x10000,0x1ffff}
251 /* register class for the fpp reg is FPP_REG, all others are GENERAL_REGS */
253 #define REGNO_REG_CLASS(REGNO) (REGNO == 16 ? FPP_REG : GENERAL_REGS)
255 /* only general registers can be used as a base reg */
257 #define BASE_REG_CLASS GENERAL_REGS
259 /* only general registers can be used to index */
261 #define INDEX_REG_CLASS GENERAL_REGS
263 /* 'a' as a constraint in the md file means the FFP_REG class */
265 #define REG_CLASS_FROM_LETTER(C) (C == 'a' ? FPP_REG : NO_REGS)
267 /* any general reg but the fpp can be a base reg */
269 #define REGNO_OK_FOR_BASE_P(regno) \
270 ((regno) < FIRST_PSEUDO_REGISTER - 1 || reg_renumber[regno] >= 0)
272 /* any general reg except the pc and fpp can be an index reg */
274 #define REGNO_OK_FOR_INDEX_P(regno) \
275 ((regno) < FIRST_PSEUDO_REGISTER - 2 || reg_renumber[regno] >= 0)
277 /* if your loading a floating point constant, it can't be done */
278 /* through a register. Force it to be a memory constant. */
280 #define PREFERRED_RELOAD_CLASS(X,CLASS) \
281 ((GET_CODE (X) == CONST_DOUBLE) ? NO_REGS : CLASS)
283 /* for the fpp reg, all modes fit; for any others, you need two for doubles */
285 #define CLASS_MAX_NREGS(CLASS, MODE) \
286 (CLASS != FPP_REG ? ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) : 1)
288 /* we don't define any special constant sizes so all should fail */
290 #define CONST_OK_FOR_LETTER_P(VALUE, C) 0
292 /* we don't define any special double sizes so all should fail */
294 #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) 0
298 * Describing Stack Layout
301 /* tahoe stack grows from high to low memory */
303 #define STACK_GROWS_DOWNWARD
305 /* Define this if longjmp restores from saved registers
306 rather than from what setjmp saved. */
307 #define LONGJMP_RESTORE_FROM_STACK
309 /* tahoe call frames grow from high to low memory on the stack */
311 #define FRAME_GROWS_DOWNWARD
313 /* the tahoe fp points to the *top* of the frame instead of the */
314 /* bottom, so we have to make this offset a constant large enough */
315 /* to jump over the biggest frame possible. */
317 #define STARTING_FRAME_OFFSET -52
319 /* tahoe always pushes 4 bytes unless it's a double in which case */
320 /* it pushes a full 8 bytes. */
322 #define PUSH_ROUNDING(BYTES) (BYTES <= 4 ? 4 : 8)
324 /* the first parameter in a function is at the fp + 4 */
326 #define FIRST_PARM_OFFSET(FNDECL) 4
328 /* the tahoe return function takes care of everything on the stack */
330 #define RETURN_POPS_ARGS(FUNTYPE,SIZE) (SIZE)
332 /* function values for all types are returned in register 0 */
334 #define FUNCTION_VALUE(VALTYPE, FUNC) \
335 gen_rtx (REG, TYPE_MODE (VALTYPE), 0)
337 /* library routines also return things in reg 0 */
339 #define LIBCALL_VALUE(MODE) gen_rtx (REG, MODE, 0)
341 /* Tahoe doesn't return structures in a reentrant way */
343 #define PCC_STATIC_STRUCT_RETURN
345 /* we only return values from a function in reg 0 */
347 #define FUNCTION_VALUE_REGNO_P(N) ((N) == 0)
349 /* we never pass args through a register */
351 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) 0
353 /* int is fine to hold the argument summary in FUNCTION_ARG */
355 #define CUMULATIVE_ARGS int
357 /* we just set CUM to 0 before the FUNCTION_ARG call. No matter what */
358 /* we make it, FUNCTION_ARG will return 0 anyway */
360 #define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME) \
363 /* all modes push their size rounded to the nearest word boundary */
364 /* except block which is the size of the block rounded up */
366 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
367 ((CUM) += ((MODE) != BLKmode \
368 ? (GET_MODE_SIZE (MODE) + 3) & ~3 \
369 : (int_size_in_bytes (TYPE) + 3) & ~3))
371 /* this is always false since we never pass params in regs */
373 #define FUNCTION_ARG_REGNO_P(N) 0
375 /* this code calculates the register entry mask and sets up */
376 /* the stack pointer for the function. The stack is set down */
377 /* far enough from the fp to jump over any push regs and local */
378 /* vars. This is a problem since the tahoe has the fp pointing */
379 /* to the top of the frame and the compiler must know the off- */
380 /* set off the fp to the local vars. */
382 #define FUNCTION_PROLOGUE(FILE, SIZE) \
383 { register int regno; \
384 register int mask = 0; \
385 extern char call_used_regs[]; \
386 for (regno = 0; regno < FIRST_PSEUDO_REGISTER-1; regno++) \
387 if (regs_ever_live[regno] && !call_used_regs[regno]) \
388 mask |= 1 << regno; \
389 fprintf (FILE, "\t.word 0x%x\n", mask); \
390 if (SIZE != 0) fprintf (FILE, "\tsubl3 $%d,fp,sp\n", (SIZE) - STARTING_FRAME_OFFSET); }
392 /* Zero out global variable in case it was used in this function. */
393 #define FUNCTION_EPILOGUE(FILE, SIZE) \
394 { extern rtx tahoe_reg_conversion_loc; \
395 tahoe_reg_conversion_loc = 0; \
400 /* to call the profiler, the address of the counter var is placed */
401 /* on the stack and then passed into mcount this way */
403 #define FUNCTION_PROFILER(FILE, LABELNO) \
404 fprintf (FILE, "\tpushal LP%d\n\tcallf $8,mcount\n", (LABELNO));
408 /* to call the profiler, push the variable value onto the stack */
409 /* and call mcount like a regular function. */
411 #define FUNCTION_PROFILER(FILE, LABELNO) \
412 fprintf (FILE, "\tpushl $LP%d\n\tcallf $8,mcount\n", (LABELNO));
416 /* all stack handling at the end of a function is handled by the */
417 /* return command. */
419 #define EXIT_IGNORE_STACK 1
422 * Library Subroutine Names
425 /* udiv is a valid C library routine in libc.a, so we call that */
427 #define UDIVSI3_LIBCALL "*udiv"
429 /* urem is a valid C library routine in libc.a, so we call that */
430 /* but not so on hcx/ux */
433 #undef UMODSI3_LIBCALL
435 #define UMODSI3_LIBCALL "*urem"
443 /* constant addresses can be treated exactly the same as normal constants */
445 #define CONSTANT_ADDRESS_P(X) \
446 (GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \
447 || GET_CODE (X) == CONST_INT || GET_CODE (X) == CONST \
448 || GET_CODE (X) == HIGH)
450 /* we can have as many as two regs in any given address */
452 #define MAX_REGS_PER_ADDRESS 2
454 /* The following is all the code for GO_IF_LEGITIMATE_ADDRESS */
455 /* most of this taken directly from the vax tm file since the */
456 /* tahoe and vax addressing modes are nearly identical. */
458 /* Is x an indirectable address? */
460 #define INDIRECTABLE_ADDRESS_P(X) \
461 (CONSTANT_ADDRESS_P (X) \
462 || (GET_CODE (X) == REG && REG_OK_FOR_BASE_P (X)) \
463 || (GET_CODE (X) == PLUS \
464 && GET_CODE (XEXP (X, 0)) == REG \
465 && REG_OK_FOR_BASE_P (XEXP (X, 0)) \
466 && CONSTANT_ADDRESS_P (XEXP (X, 1))))
468 /* If x is a non-indexed-address, go to ADDR. */
470 #define GO_IF_NONINDEXED_ADDRESS(X, ADDR) \
471 { register rtx xfoob = (X); \
472 if (GET_CODE (xfoob) == REG) goto ADDR; \
473 if (INDIRECTABLE_ADDRESS_P (xfoob)) goto ADDR; \
474 xfoob = XEXP (X, 0); \
475 if (GET_CODE (X) == MEM && INDIRECTABLE_ADDRESS_P (xfoob)) \
477 if ((GET_CODE (X) == PRE_DEC || GET_CODE (X) == POST_INC) \
478 && GET_CODE (xfoob) == REG && REGNO (xfoob) == 14) \
481 /* Is PROD an index term in mode MODE. */
483 #define INDEX_TERM_P(PROD, MODE) \
484 (GET_MODE_SIZE (MODE) == 1 \
485 ? (GET_CODE (PROD) == REG && REG_OK_FOR_BASE_P (PROD)) \
486 : (GET_CODE (PROD) == MULT \
488 (xfoo0 = XEXP (PROD, 0), xfoo1 = XEXP (PROD, 1), \
489 ((GET_CODE (xfoo0) == CONST_INT \
490 && INTVAL (xfoo0) == GET_MODE_SIZE (MODE) \
491 && GET_CODE (xfoo1) == REG \
492 && REG_OK_FOR_INDEX_P (xfoo1)) \
494 (GET_CODE (xfoo1) == CONST_INT \
495 && INTVAL (xfoo1) == GET_MODE_SIZE (MODE) \
496 && GET_CODE (xfoo0) == REG \
497 && REG_OK_FOR_INDEX_P (xfoo0))))))
499 /* Is the addition to the index a reg? */
501 #define GO_IF_REG_PLUS_INDEX(X, MODE, ADDR) \
502 { register rtx xfooa; \
503 if (GET_CODE (X) == PLUS) \
504 { if (GET_CODE (XEXP (X, 0)) == REG \
505 && REG_OK_FOR_BASE_P (XEXP (X, 0)) \
506 && (xfooa = XEXP (X, 1), \
507 INDEX_TERM_P (xfooa, MODE))) \
509 if (GET_CODE (XEXP (X, 1)) == REG \
510 && REG_OK_FOR_BASE_P (XEXP (X, 1)) \
511 && (xfooa = XEXP (X, 0), \
512 INDEX_TERM_P (xfooa, MODE))) \
515 /* Is the rtx X a valid memory address for operand of mode MODE? */
516 /* If it is, go to ADDR */
518 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
519 { register rtx xfoo, xfoo0, xfoo1; \
520 GO_IF_NONINDEXED_ADDRESS (X, ADDR); \
521 if (GET_CODE (X) == PLUS) \
522 { xfoo = XEXP (X, 0); \
523 if (INDEX_TERM_P (xfoo, MODE)) \
524 { GO_IF_NONINDEXED_ADDRESS (XEXP (X, 1), ADDR); } \
525 xfoo = XEXP (X, 1); \
526 if (INDEX_TERM_P (xfoo, MODE)) \
527 { GO_IF_NONINDEXED_ADDRESS (XEXP (X, 0), ADDR); } \
528 if (CONSTANT_ADDRESS_P (XEXP (X, 0))) \
529 { if (GET_CODE (XEXP (X, 1)) == REG \
530 && REG_OK_FOR_BASE_P (XEXP (X, 1))) \
532 GO_IF_REG_PLUS_INDEX (XEXP (X, 1), MODE, ADDR); } \
533 if (CONSTANT_ADDRESS_P (XEXP (X, 1))) \
534 { if (GET_CODE (XEXP (X, 0)) == REG \
535 && REG_OK_FOR_BASE_P (XEXP (X, 0))) \
537 GO_IF_REG_PLUS_INDEX (XEXP (X, 0), MODE, ADDR); } } }
539 /* Register 16 can never be used for index or base */
541 #ifndef REG_OK_STRICT
542 #define REG_OK_FOR_INDEX_P(X) (REGNO(X) != 16)
543 #define REG_OK_FOR_BASE_P(X) (REGNO(X) != 16)
545 #define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
546 #define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
549 /* Addressing is too simple to allow optimizing here */
551 #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) {}
553 /* Post_inc and pre_dec always adds 4 */
555 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
556 { if (GET_CODE(ADDR) == POST_INC || GET_CODE(ADDR) == PRE_DEC) \
558 if (GET_CODE (ADDR) == PLUS) \
559 { if (CONSTANT_ADDRESS_P (XEXP (ADDR, 0)) \
560 && GET_CODE (XEXP (ADDR, 1)) == REG); \
561 else if (CONSTANT_ADDRESS_P (XEXP (ADDR, 1)) \
562 && GET_CODE (XEXP (ADDR, 0)) == REG); \
565 /* Double's are not legitimate as immediate operands */
567 #define LEGITIMATE_CONSTANT_P(X) \
568 (GET_CODE (X) != CONST_DOUBLE)
572 * Miscellaneous Parameters
575 /* the elements in the case jump table are all words */
577 #define CASE_VECTOR_MODE HImode
579 /* each of the table elements in a case are relative to the jump address */
581 #define CASE_VECTOR_PC_RELATIVE
583 /* tahoe case instructions just fall through to the next instruction */
584 /* if not satisfied. It doesn't support a default action */
586 #define CASE_DROPS_THROUGH
588 /* the standard answer is given here and work ok */
590 #define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR
592 /* in a general div case, it's easiest to use TRUNC_DIV_EXPR */
594 #define EASY_DIV_EXPR TRUNC_DIV_EXPR
596 /* the standard seems to be leaving char's as signed so we left it */
597 /* this way even though we think they should be unsigned! */
599 #define DEFAULT_SIGNED_CHAR 1
601 /* the most we can move without cutting down speed is 4 bytes */
605 /* our int is 32 bits */
607 #define INT_TYPE_SIZE 32
609 /* byte access isn't really slower than anything else */
611 #define SLOW_BYTE_ACCESS 0
613 /* zero extension is more than one instruction so try to avoid it */
615 #define SLOW_ZERO_EXTEND
617 /* any bits higher than the low 4 are ignored in the shift count */
618 /* so don't bother zero extending or sign extending them */
620 #define SHIFT_COUNT_TRUNCATED 1
622 /* we don't need to officially convert from one fixed type to another */
623 /* in order to use it as that type. We can just assume it's the same */
625 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
627 /* pass chars as ints */
629 #define PROMOTE_PROTOTYPES
631 /* pointers can be represented by an si mode expression */
635 /* function addresses are made by specifying a byte address */
637 #define FUNCTION_MODE QImode
639 /* Define this if addresses of constant functions
640 shouldn't be put through pseudo regs where they can be cse'd.
641 On the tahoe a call with a constant address is much faster than one with a
644 #define NO_FUNCTION_CSE
646 /* specify the costs of various sorts of constants,
647 and also indicate that multiplication is cheap on this machine. */
649 #define CONST_COSTS(RTX,CODE,OUTER_CODE) \
651 /* Constant zero is super cheap due to clr instruction. */ \
652 if (RTX == const0_rtx) return 0; \
653 if ((unsigned) INTVAL (RTX) < 077) return 1; \
654 if (INTVAL (RTX) <= 127 && INTVAL (RTX) >= -128) return 2; \
666 * Condition Code Information
669 /* Nonzero if the results of the previous comparison are
670 in the floating point condition code register. */
672 #define CC_UNCHANGED 04000
675 #define NOTICE_UPDATE_CC(EXP, INSN) \
676 { if (cc_status.flags & CC_UNCHANGED) \
677 /* Happens for cvtld and a few other insns. */ \
678 cc_status.flags &= ~CC_UNCHANGED; \
679 else if (GET_CODE (EXP) == SET) \
680 { if (GET_CODE (SET_SRC (EXP)) == CALL) \
682 else if (GET_CODE (SET_DEST (EXP)) != PC) \
683 { cc_status.flags = 0; \
684 cc_status.value1 = SET_DEST (EXP); \
685 cc_status.value2 = SET_SRC (EXP); } } \
686 else if (GET_CODE (EXP) == PARALLEL \
687 && GET_CODE (XVECEXP (EXP, 0, 0)) == SET \
688 && GET_CODE (SET_DEST (XVECEXP (EXP, 0, 0))) != PC) \
689 { cc_status.flags = 0; \
690 cc_status.value1 = SET_DEST (XVECEXP (EXP, 0, 0)); \
691 cc_status.value2 = SET_SRC (XVECEXP (EXP, 0, 0)); } \
692 /* PARALLELs whose first element sets the PC are aob, sob insns. \
693 They do change the cc's. So drop through and forget the cc's. */ \
694 else CC_STATUS_INIT; \
695 if (cc_status.value1 && GET_CODE (cc_status.value1) == REG \
696 && cc_status.value2 \
697 && reg_overlap_mentioned_p (cc_status.value1, cc_status.value2)) \
698 cc_status.value2 = 0; \
699 if (cc_status.value1 && GET_CODE (cc_status.value1) == MEM \
700 && cc_status.value2 \
701 && GET_CODE (cc_status.value2) == MEM) \
702 cc_status.value2 = 0; }
703 /* Actual condition, one line up, should be that value2's address
704 depends on value1, but that is too much of a pain. */
708 * Output of Assembler Code
711 /* print which tahoe version compiled this code and print a directive */
712 /* to the gnu assembler to say that the following is normal assembly */
715 #define ASM_FILE_START(FILE) \
716 { fprintf (FILE, "#gcc hcx 1.0\n\n"); \
717 output_file_directive ((FILE), main_input_filename);} while (0)
719 #define ASM_FILE_START(FILE) fprintf (FILE, "#gcc tahoe 1.0\n#NO_APP\n");
722 /* the instruction that turns on the APP for the gnu assembler */
724 #define ASM_APP_ON "#APP\n"
726 /* the instruction that turns off the APP for the gnu assembler */
728 #define ASM_APP_OFF "#NO_APP\n"
730 /* what to output before read-only data. */
732 #define TEXT_SECTION_ASM_OP ".text"
734 /* what to output before writable data. */
736 #define DATA_SECTION_ASM_OP ".data"
738 /* this is what we call each of the regs. notice that the FPP reg is */
739 /* called "ac". This should never get used due to the way we've set */
740 /* up FPP instructions in the md file. But we call it "ac" here to */
743 #define REGISTER_NAMES \
744 {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", \
745 "r9", "r10", "r11", "r12", "fp", "sp", "pc", "ac"}
748 /* allow generation of sdb info in the assembly */
749 #define SDB_DEBUGGING_INFO
751 /* allow generation of dbx info in the assembly */
753 #define DBX_DEBUGGING_INFO
755 /* our dbx doesn't support this */
759 /* we don't want symbols broken up */
761 #define DBX_CONTIN_LENGTH 0
763 /* this'll really never be used, but we'll leave it at this */
765 #define DBX_CONTIN_CHAR '?'
769 /* registers are called the same thing in dbx anything else */
770 /* This is necessary even if we generate SDB output */
772 #define DBX_REGISTER_NUMBER(REGNO) (REGNO)
774 /* labels are the label followed by a colon and a newline */
775 /* must be a statement, so surround it in a null loop */
777 #define ASM_OUTPUT_LABEL(FILE,NAME) \
778 do { assemble_name (FILE, NAME); fputs (":\n", FILE); } while (0)
780 /* use the .globl directive to make labels global for the linker */
782 #define ASM_GLOBALIZE_LABEL(FILE,NAME) \
783 do { fputs (".globl ", FILE); assemble_name (FILE, NAME); fputs ("\n", FILE);} while (0)
785 /* output a label by appending an underscore to it */
787 #define ASM_OUTPUT_LABELREF(FILE,NAME) \
788 fprintf (FILE, "_%s", NAME)
790 /* use the standard format for printing internal labels */
792 #define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM) \
793 fprintf (FILE, "%s%d:\n", PREFIX, NUM)
795 /* a * is used for label indirection in unix assembly */
797 #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
798 sprintf (LABEL, "*%s%d", PREFIX, NUM)
800 /* outputting a double is easy cause we only have one kind */
803 #define ASM_OUTPUT_DOUBLE(FILE,VALUE) \
804 fprintf (FILE, "\t.double 0d%.20e\n", (VALUE))
806 #define ASM_OUTPUT_DOUBLE(FILE,VALUE) \
808 union { int i[2]; double d;} temp; \
810 if (TARGET_HEX_FLOAT) \
811 fprintf ((FILE), "\t.long 0x%x,0x%x # %.20e\n", \
812 temp.i[0], temp.i[1], temp.d); \
814 fprintf (FILE, "\t.dfloat 0d%.20e\n", temp.d); \
818 /* This is how to output an assembler line defining a `float' constant. */
821 #define ASM_OUTPUT_FLOAT(FILE,VALUE) \
822 fprintf (FILE, "\t.float 0f%.20e\n", (VALUE))
824 #define ASM_OUTPUT_FLOAT(FILE,VALUE) \
826 union { int i; float f;} temp; \
827 temp.f = (float) (VALUE); \
828 if (TARGET_HEX_FLOAT) \
829 fprintf ((FILE), "\t.long 0x%x # %.20e\n", \
832 fprintf (FILE, "\t.float 0f%.20e\n", temp.f); \
836 /* This is how to output an assembler line defining an `int' constant. */
838 #define ASM_OUTPUT_INT(FILE,VALUE) \
839 ( fprintf (FILE, "\t.long "), \
840 output_addr_const (FILE, (VALUE)), \
841 fprintf (FILE, "\n"))
843 /* Likewise for `char' and `short' constants. */
845 #define ASM_OUTPUT_SHORT(FILE,VALUE) \
846 ( fprintf (FILE, "\t.word "), \
847 output_addr_const (FILE, (VALUE)), \
848 fprintf (FILE, "\n"))
850 #define ASM_OUTPUT_CHAR(FILE,VALUE) \
851 ( fprintf (FILE, "\t.byte "), \
852 output_addr_const (FILE, (VALUE)), \
853 fprintf (FILE, "\n"))
856 /* This is how to output an assembler line for an ASCII string. */
858 #define ASM_OUTPUT_ASCII(FILE, p, size) \
859 do { register int i; \
860 fprintf ((FILE), "\t.ascii \""); \
861 for (i = 0; i < (size); i++) \
863 register int c = (p)[i]; \
864 if (c == '\'' || c == '\\') \
865 putc ('\\', (FILE)); \
866 if (c >= ' ' && c < 0177 && c != '\"') \
870 fprintf ((FILE), "\\%03o", c); \
873 fprintf ((FILE), "\"\n"); } while (0)
876 /* This is how to output an assembler line for a numeric constant byte. */
878 #define ASM_OUTPUT_BYTE(FILE,VALUE) \
879 fprintf (FILE, "\t.byte 0x%x\n", (VALUE))
881 /* this is the insn to push a register onto the stack */
883 #define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \
884 fprintf (FILE, "\tpushl %s\n", reg_names[REGNO])
886 /* this is the insn to pop a register from the stack */
888 #define ASM_OUTPUT_REG_POP(FILE,REGNO) \
889 fprintf (FILE, "\tmovl (sp)+,%s\n", reg_names[REGNO])
891 /* this is required even thought tahoe doesn't support it */
892 /* cause the C code expects it to be defined */
894 #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
895 fprintf (FILE, "\t.long L%d\n", VALUE)
897 /* This is how to output an element of a case-vector that is relative. */
899 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) \
900 fprintf (FILE, "\t.word L%d-L%d\n", VALUE, REL)
902 /* This is how to output an assembler line
903 that says to advance the location counter
904 to a multiple of 2**LOG bytes. */
907 #define CASE_ALIGNMENT 2
908 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
909 if ((LOG)!=0) fprintf ((FILE), "\t.align %d\n", 1<<(LOG))
911 #define CASE_ALIGNMENT 1
912 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
913 LOG ? fprintf (FILE, "\t.align %d\n", (LOG)) : 0
916 /* This is how to skip over some space */
918 #define ASM_OUTPUT_SKIP(FILE,SIZE) \
919 fprintf (FILE, "\t.space %u\n", (SIZE))
921 /* This defines common variables across files */
924 #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
925 ( fputs (".comm ", (FILE)), \
926 assemble_name ((FILE), (NAME)), \
927 fprintf ((FILE), ",%u\n", (SIZE)))
929 #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
930 ( fputs (".comm ", (FILE)), \
931 assemble_name ((FILE), (NAME)), \
932 fprintf ((FILE), ",%u\n", (ROUNDED)))
935 /* This says how to output an assembler line
936 to define a local common symbol. */
939 #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \
940 ( fputs ("\t.bss ", (FILE)), \
941 assemble_name ((FILE), (NAME)), \
942 fprintf ((FILE), ",%u,4\n", (SIZE),(ROUNDED)))
944 #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \
945 ( fputs (".lcomm ", (FILE)), \
946 assemble_name ((FILE), (NAME)), \
947 fprintf ((FILE), ",%u\n", (ROUNDED)))
950 /* code to generate a label */
952 #define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \
953 ( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \
954 sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO)))
956 /* Define the parentheses used to group arithmetic operations
957 in assembler code. */
959 #define ASM_OPEN_PAREN "("
960 #define ASM_CLOSE_PAREN ")"
962 /* Define results of standard character escape sequences. */
964 #define TARGET_BELL 007
965 #define TARGET_BS 010
966 #define TARGET_TAB 011
967 #define TARGET_NEWLINE 012
968 #define TARGET_VT 013
969 #define TARGET_FF 014
970 #define TARGET_CR 015
972 /* Print an instruction operand X on file FILE.
973 CODE is the code from the %-spec that requested printing this operand;
974 if `%z3' was used to print operand 3, then CODE is 'z'.
975 On the Vax, the only code used is `#', indicating that either
976 `d' or `g' should be printed, depending on whether we're using dfloat
978 /* Print an operand. Some difference from the vax code,
979 since the tahoe can't support immediate floats and doubles.
981 %@ means print the proper alignment operand for aligning after a casesi.
982 This depends on the assembler syntax.
983 This is 1 for our assembler, since .align is logarithmic.
985 %s means the number given is supposed to be a shift value, but on
986 the tahoe it should be converted to a number that can be used as a
987 multiplicative constant (cause multiplication is a whole lot faster
988 than shifting). So make the number 2^n instead. */
990 #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \
993 #define PRINT_OPERAND(FILE, X, CODE) \
995 putc ('0' + CASE_ALIGNMENT, FILE); \
996 else if (CODE == 's') \
997 fprintf (FILE, "$%d", 1 << INTVAL(X)); \
998 else if (GET_CODE (X) == REG) \
999 fprintf (FILE, "%s", reg_names[REGNO (X)]); \
1000 else if (GET_CODE (X) == MEM) \
1001 output_address (XEXP (X, 0)); \
1002 else { putc ('$', FILE); output_addr_const (FILE, X); }}
1004 /* When the operand is an address, call print_operand_address to */
1005 /* do the work from output-tahoe.c. */
1007 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
1008 print_operand_address (FILE, ADDR)
1010 /* This is for G++ */
1012 #define CRT0_DUMMIES
1013 #define DOT_GLOBAL_START
1015 #define NO_GNU_LD /* because of COFF format */
1016 #define LINK_SPEC "-L/usr/staff/lib"
This page took 0.080511 seconds and 4 git commands to generate.