1 # Makefile for GNU C compiler.
2 # Copyright (C) 1987, 88, 90-97, 1998 Free Software Foundation, Inc.
4 #This file is part of GNU CC.
6 #GNU CC is free software; you can redistribute it and/or modify
7 #it under the terms of the GNU General Public License as published by
8 #the Free Software Foundation; either version 2, or (at your option)
11 #GNU CC is distributed in the hope that it will be useful,
12 #but WITHOUT ANY WARRANTY; without even the implied warranty of
13 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 #GNU General Public License for more details.
16 #You should have received a copy of the GNU General Public License
17 #along with GNU CC; see the file COPYING. If not, write to
18 #the Free Software Foundation, 59 Temple Place - Suite 330,
19 #Boston MA 02111-1307, USA.
21 # The targets for external use include:
22 # all, doc, proto, install, install-cross, install-cross-rest,
23 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24 # stage1, stage2, stage3, stage4.
26 # Suppress smart makes who think they know how to automake Yacc files
29 # Directory where sources are, from where we are.
33 # Variables that exist for you to override.
34 # See below for how to change them for certain systems.
36 # List of language subdirectories.
37 # This is overridden by configure.
40 # Selection of languages to be made.
41 # This is overridden by configure.
42 LANGUAGES
= c proto gcov
$(exeext
) @all_languages@
44 # Selection of languages to be made during stage1 build.
45 # This is overridden by configure.
46 BOOT_LANGUAGES
= c @all_boot_languages@
52 # Various ways of specifying flags for compilations:
53 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
54 # BOOT_CFLAGS is the value of CFLAGS to pass
55 # to the stage2 and stage3 compilations
56 # WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
57 # (And for stage 1 if the native compiler is GCC.) It is
58 # separate from BOOT_CFLAGS because people tend to override optimization
59 # flags and we'd like them to still have warnings turned on. They are free
60 # to explicitly turn warnings off if they wish.
61 # XCFLAGS is used for most compilations but not when using the GCC just built.
62 # TCFLAGS is used for compilations with the GCC just built.
65 CFLAGS
= -g @stage1_warn_cflags@
66 BOOT_CFLAGS
= -O2
$(CFLAGS
)
67 WARN_CFLAGS
= -W
-Wall
68 # These exists to be overridden by the x-* and t-* files, respectively.
76 # srcdir might be a relative pathname which won't be valid in a subdirectory,
77 # so we must use objdir/srcdir instead to make it safe. objdir is always
79 BISON
= `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
80 /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
81 *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
82 esac; else echo bison ; fi`
84 LEX
= `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
91 # on sysV, define this as cp.
93 # Some systems may be missing symbolic links, regular links, or both.
94 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
97 # These permit overriding just for certain files.
98 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
99 INSTALL_DATA
= @INSTALL_DATA@
103 # For GNUmake: let us decide what gets passed to recursive makes.
107 # Define this as & to perform parallel make on a Sequent.
108 # Note that this has some bugs, and it seems currently necessary
109 # to compile all the gen* files first by hand to avoid erroneous results.
112 # How to invoke ranlib.
114 # Test to use to see whether ranlib exists on the system.
115 RANLIB_TEST
= [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
]
117 # Compiler to use for compiling libgcc1.a.
118 # OLDCC should not be the GNU C compiler,
119 # since that would compile typical libgcc1.a functions such as mulsi3
120 # into infinite recursions.
123 # CFLAGS for use with OLDCC, for compiling libgcc1.a.
124 # NOTE: -O does not work on some Unix systems!
127 # Version of ar to use when compiling libgcc1.a.
131 # Target to use when installing include directory. Either
132 # install-headers-tar or install-headers-cpio.
133 INSTALL_HEADERS_DIR
= @build_install_headers_dir@
135 # Header files that are made available under the same name
136 # to programs compiled with GCC.
137 USER_H
= $(srcdir)/ginclude
/stdarg.h
$(srcdir)/ginclude
/stddef.h \
138 $(srcdir)/ginclude
/varargs.h
$(srcdir)/ginclude
/va-alpha.h \
139 $(srcdir)/ginclude
/va-h8300.h
$(srcdir)/ginclude
/va-i860.h \
140 $(srcdir)/ginclude
/va-i960.h
$(srcdir)/ginclude
/va-mips.h \
141 $(srcdir)/ginclude
/va-m88k.h
$(srcdir)/ginclude
/va-mn10200.h \
142 $(srcdir)/ginclude
/va-mn10300.h
$(srcdir)/ginclude
/va-pa.h \
143 $(srcdir)/ginclude
/va-pyr.h
$(srcdir)/ginclude
/va-sparc.h \
144 $(srcdir)/ginclude
/va-clipper.h
$(srcdir)/ginclude
/va-spur.h \
145 $(srcdir)/ginclude
/va-m32r.h
$(srcdir)/ginclude
/va-sh.h \
146 $(srcdir)/ginclude
/va-v850.h
$(srcdir)/ginclude
/va-arc.h \
147 $(srcdir)/ginclude
/iso646.h
$(srcdir)/ginclude
/va-ppc.h \
148 $(EXTRA_HEADERS
) $(LANG_EXTRA_HEADERS
) \
149 $(srcdir)/ginclude
/proto.h
$(srcdir)/ginclude
/stdbool.h
151 # Target to use whe installing assert.h. Some systems may
152 # want to set this empty.
153 INSTALL_ASSERT_H
= install-assert-h
155 # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
156 # Usually the one we just built.
157 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
158 GCC_FOR_TARGET
= .
/xgcc
-B.
/
160 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
161 # It omits XCFLAGS, and specifies -B./.
162 # It also specifies -I./include to find, e.g., stddef.h.
163 GCC_CFLAGS
=$(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) -I.
/include $(TCFLAGS
)
165 # Sed command to transform gcc to installed name. Overwritten by configure.
166 program_transform_name
= @program_transform_name@
167 program_transform_cross_name
= s
,^
,$(target_alias
)-,
169 build_canonical
= @build_canonical@
170 host_canonical
= @host_canonical@
172 # Tools to use when building a cross-compiler.
173 # These are used because `configure' appends `cross-make'
174 # to the makefile when making a cross-compiler.
176 # Use the tools from the build tree, if they are available.
178 # objdir is set by configure.
182 if [ -f $(objdir)/../binutils/ar ] ; then \
183 echo $(objdir)/../binutils/ar ; \
185 if [ "$(host_canonical)" = "$(target)" ] ; then \
188 t='$(program_transform_name)'; echo ar | sed -e $$t ; \
191 AR_FOR_TARGET_FLAGS
= rc
192 RANLIB_FOR_TARGET
= ` \
193 if [ -f $(objdir)/../binutils/ranlib ] ; then \
194 echo $(objdir)/../binutils/ranlib ; \
196 if [ "$(host_canonical)" = "$(target)" ] ; then \
199 t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
202 RANLIB_TEST_FOR_TARGET
= \
203 [ -f
$(RANLIB_FOR_TARGET
) ] \
204 ||
( [ "$(host_canonical)" = "$(target)" ] \
205 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
207 # We always act like a cross-compiler, even when we're
208 # compiling native. This is because we want to use our own tools if
209 # we can. We don't just set RANLIB to a complicated expression,
210 # because the top level Makefile.in might override RANLIB_FOR_TARGET.
211 # These are from the FSF file "cross-make".
212 AR
= $(AR_FOR_TARGET
)
213 AR_FLAGS
= $(AR_FOR_TARGET_FLAGS
)
214 OLDAR
= $(AR_FOR_TARGET
)
215 OLDAR_FLAGS
= $(AR_FOR_TARGET_FLAGS
)
216 RANLIB
= $(RANLIB_FOR_TARGET
)
217 RANLIB_TEST
= $(RANLIB_TEST_FOR_TARGET
)
219 # Dir to search for system headers. Overridden by cross-make.
220 SYSTEM_HEADER_DIR
= /usr
/include
222 # Control whether to run fixproto.
223 STMP_FIXPROTO
= stmp-fixproto
225 # Test to see whether <limits.h> exists in the system header files.
226 LIMITS_H_TEST
= [ -f
$(SYSTEM_HEADER_DIR
)/limits.h
]
228 # There may be a premade insn-attrtab.c for this machine.
229 # (You could rebuild it with genattrtab as usual, but it takes a long time.)
230 # PREMADE_ATTRTAB is the file name of the file to use.
231 # PREMADE_ATTRTAB_MD is the md file it corresponds to.
232 PREMADE_ATTRTAB_MD
= Makefile
# Guaranteed not to cmp equal to md.
236 target_alias
=@target_alias@
237 xmake_file
=@dep_host_xmake_file@
238 tmake_file
=@dep_tmake_file@
239 out_file
=$(srcdir)/config
/@out_file@
240 out_object_file
=@out_object_file@
241 md_file
=$(srcdir)/config
/@md_file@
242 tm_file
=@tm_file_list@
243 build_xm_file
=@build_xm_file_list@
244 host_xm_file
=@host_xm_file_list@
245 lang_specs_files
=@lang_specs_files@
246 lang_options_files
=@lang_options_files@
247 lang_tree_files
=@lang_tree_files@
248 GCC_THREAD_FILE
=@thread_file@
249 OBJC_BOEHM_GC
=@objc_boehm_gc@
250 GTHREAD_FLAGS
=@gthread_flags@
251 # Be prepared for gcc2 merges.
252 gcc_version
=@gcc_version@
253 gcc_version_trigger
=@gcc_version_trigger@
254 version
=$(gcc_version
)
255 mainversion
=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
257 # Common prefix for installation directories.
258 # NOTE: This directory must exist when you start installation.
260 # Directory in which to put localized header files. On the systems with
261 # gcc as the native cc, `local_prefix' may not be `prefix' which is
263 # NOTE: local_prefix *should not* default from prefix.
264 local_prefix
= @local_prefix@
265 # Directory in which to put host dependent programs and libraries
266 exec_prefix = @
exec_prefix@
267 # Directory in which to put the executable for the command `gcc'
269 # Directory in which to put the directories used by the compiler.
271 # Directory in which the compiler finds executables, libraries, etc.
272 libsubdir
= $(libdir)/gcc-lib
/$(target_alias
)/$(version
)
273 # Used to produce a relative $(tooldir) in gcc.o
274 unlibsubdir
= ..
/..
/..
275 # Directory in which the compiler finds g++ includes.
276 gxx_include_dir
= @gxx_include_dir@
277 # Directory to search for site-specific includes.
278 includedir = $(local_prefix
)/include
279 # assertdir is overridden in cross-make.
280 # (But this currently agrees with what is in cross-make.)
281 assertdir
= $(tooldir
)/include
282 # where the info files go
284 # Extension (if any) to put in installed man-page filename.
287 exeext
= @host_exeext@
288 build_exeext
= @build_exeext@
290 # Directory in which to put man pages.
291 mandir = @
mandir@
/man1
292 # Directory in which to find other cross-compilation tools and headers.
293 # Used in install-cross.
294 tooldir
= $(exec_prefix)/$(target_alias
)
295 # Dir for temp files.
298 # Additional system libraries to link with.
301 # Change this to a null string if obstacks are installed in the
305 # Configure will set these if you need vfprintf and possibly _doprnt support.
309 # Specify the rule for actually making libgcc.a,
311 # and the rule for installing it.
312 INSTALL_LIBGCC
= install-libgcc
314 # Specify the rule for actually making libgcc1.a.
315 # The value may be empty; that means to do absolutely nothing
316 # with or for libgcc1.a.
319 # Specify the rule for making libgcc1.a for a cross-compiler.
320 # The default rule assumes that libgcc1.a is supplied by the user.
321 CROSS_LIBGCC1
= libgcc1.cross
323 # Specify the rule for actually making libgcc2.a.
326 # Options to use when compiling libgcc2.a.
327 # -g1 causes output of debug info only for file-scope entities.
328 # we use this here because that should be enough, and also
329 # so that -g1 will be tested.
331 LIBGCC2_DEBUG_CFLAGS
= -g1
332 LIBGCC2_CFLAGS
= -O2
$(LIBGCC2_INCLUDES
) $(GCC_CFLAGS
) $(TARGET_LIBGCC2_CFLAGS
) $(LIBGCC2_DEBUG_CFLAGS
) $(GTHREAD_FLAGS
) -DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
334 # Additional options to use when compiling libgcc2.a.
335 # Some targets override this to -Iinclude
338 # Additional target-dependent options for compiling libgcc2.a.
339 TARGET_LIBGCC2_CFLAGS
=
341 # Things which must be built before building libgcc2.a.
342 # Some targets override this to stmp-int-hdrs
345 # libgcc1-test target (must also be overridable for a target)
346 LIBGCC1_TEST
= libgcc1-test
348 # List of extra executables that should be compiled for this target machine
349 # that are used for compiling from source code to object code.
350 # The rules for compiling them should be in the t-* file for the machine.
351 EXTRA_PASSES
=@extra_passes@
353 # Like EXTRA_PASSES, but these are used when linking.
354 EXTRA_PROGRAMS
= @extra_programs@
356 # List of extra object files that should be compiled for this target machine.
357 # The rules for compiling them should be in the t-* file for the machine.
358 EXTRA_PARTS
= @extra_parts@
360 # List of extra object files that should be compiled and linked with
361 # compiler proper (cc1, cc1obj, cc1plus).
362 EXTRA_OBJS
= @extra_objs@
364 # List of extra object files that should be compiled and linked with
366 EXTRA_GCC_OBJS
=@host_extra_gcc_objs@
368 # List of additional header files to install.
369 # Often this is edited directly by `configure'.
370 EXTRA_HEADERS
=@extra_headers_list@
372 # Set this to `collect2' to enable use of collect2.
373 USE_COLLECT2
= @will_use_collect2@
374 MAYBE_USE_COLLECT2
= @maybe_use_collect2@
375 # It is convenient for configure to add the assignment at the beginning,
376 # so don't override it here.
377 USE_COLLECT2
= collect2
$(exeext
)
379 # List of extra C and assembler files to add to libgcc1.a.
380 # Assembler files should have names ending in `.asm'.
383 # List of extra C and assembler files to add to libgcc2.a.
384 # Assembler files should have names ending in `.asm'.
387 # Default float.h source to use for cross-compiler.
388 # This is overridden by configure.
389 CROSS_FLOAT_H
=$(srcdir)/config
/float-@float_format@.h
391 # We do not try to build float.h anymore. Let configure select the
392 # appropriate pre-built float.h file for the target.
393 FLOAT_H
=$(srcdir)/config
/float-@float_format@.h
395 # Program to convert libraries.
398 # Control whether header files are installed.
399 INSTALL_HEADERS
=install-headers
401 # Options for tar when copying trees. So HPUX can override it.
404 # Select which version of fixincludes to use (I.E. regular versus SVR4)
405 # This value is overridden directly by configure.
406 FIXINCLUDES
= @fixincludes@
408 # Additional directories of header files to run fixincludes on.
409 # These should be directories searched automatically by default
410 # just as /usr/include is.
411 # *Do not* use this for directories that happen to contain
412 # header files, but are not searched automatically by default.
413 # On most systems, this is empty.
414 OTHER_FIXINCLUDES_DIRS
=
416 # A list of all the language-specific executables.
417 # This is overridden by configure.
418 COMPILERS
= cc1
$(exeext
) @all_compilers@
420 # List of things which should already be built whenever we try to use xgcc
421 # to compile anything (without linking).
422 GCC_PASSES
=xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
)
424 # List of things which should already be built whenever we try to use xgcc
426 GCC_PARTS
=$(GCC_PASSES
) $(LIBGCC
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) $(EXTRA_PARTS
)
428 # Directory to link to, when using the target `maketest'.
431 # Guaranteed to not exist when not passing md through cpp.
432 # This value is overridden directly by configure.
433 MD_FILE
= md-cpp-not-used
435 # Flags to use when cross-building GCC.
436 # Prefix to apply to names of object files when using them
437 # to run on the machine we are compiling on.
439 # Prefix to apply to names of object files when compiling them
440 # to run on the machine we are compiling on.
441 # The default for this variable is chosen to keep these rules
442 # out of the way of the other rules for compiling the same source files.
445 HOST_CFLAGS
=$(ALL_CFLAGS
)
447 HOST_LDFLAGS
=$(LDFLAGS
)
448 HOST_CPPFLAGS
=$(ALL_CPPFLAGS
)
449 HOST_ALLOCA
=$(ALLOCA
)
450 HOST_MALLOC
=$(MALLOC
)
451 HOST_OBSTACK
=$(OBSTACK
)
452 HOST_VFPRINTF
=$(VFPRINTF
)
453 HOST_DOPRINT
=$(DOPRINT
)
455 # Actual name to use when installing a native compiler.
456 GCC_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcc | sed -e $$t`
457 PROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo protoize | sed -e $$t`
458 UNPROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
460 # Actual name to use when installing a cross-compiler.
461 GCC_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
462 PROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
463 UNPROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
465 # Choose the real default target.
468 # Choose the real install target.
469 INSTALL_TARGET
=install-normal
471 # Setup the testing framework, if you have one
472 EXPECT
= `if [ -f $${rootme}/../expect/expect ] ; then \
473 echo $${rootme}/../expect/expect ; \
474 else echo expect ; fi`
476 RUNTEST
= `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
477 echo $${srcdir}/../dejagnu/runtest ; \
478 else echo runtest; fi`
481 # Extra symbols for fixproto to define when parsing headers.
484 # Extra flags to use when compiling crt{begin,end}.o.
487 # Extra flags to use when compiling [m]crt0.o.
490 # "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
493 # End of variables for you to override.
495 # Definition of `all' is here so that new rules inserted by sed
496 # do not specify the default target.
497 # The real definition is under `all.internal' (for native compilers)
498 # or `all.cross' (for cross compilers).
501 # This tells GNU Make version 3 not to put all variables in the environment.
504 # sed inserts variable overrides after the following line.
518 # Now figure out from those variables how to compile and link.
522 # IN_GCC tells various files that system.h, toplev.c, etc are available.
523 INTERNAL_CFLAGS
= $(CROSS
) -DIN_GCC @extra_c_flags@
525 # This is the variable actually used when we compile.
526 ALL_CFLAGS
= $(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) $(XCFLAGS
) \
527 @DEFS@
$(SCHED_CFLAGS
)
530 ALL_CPPFLAGS
= $(CPPFLAGS
) $(X_CPPFLAGS
) $(T_CPPFLAGS
)
532 # Even if ALLOCA is set, don't use it if compiling with GCC.
533 USE_ALLOCA
= ${ALLOCA}
534 USE_HOST_ALLOCA
= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
535 USE_HOST_MALLOC
= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
536 USE_HOST_OBSTACK
= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
537 USE_HOST_VFPRINTF
= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
538 USE_HOST_DOPRINT
= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
540 # Dependency on obstack, alloca, malloc or whatever library facilities
541 # are not installed in the system libraries.
542 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
543 LIBDEPS
= $(OBSTACK
) $(ALLOCA
) $(MALLOC
) $(VFPRINTF
) $(DOPRINT
)
545 # Likewise, for use in the tools that must run on this machine
546 # even if we are cross-building GCC.
547 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
548 HOST_LIBDEPS
= $(HOST_PREFIX
)$(HOST_OBSTACK
) $(HOST_PREFIX
)$(HOST_ALLOCA
) $(HOST_PREFIX
)$(HOST_MALLOC
) $(HOST_PREFIX
)$(HOST_VFPRINTF
) $(HOST_PREFIX
)$(HOST_DOPRINT
)
550 # How to link with both our special library facilities
551 # and the system's installed libraries.
552 LIBS
= $(OBSTACK
) $(USE_ALLOCA
) $(MALLOC
) $(VFPRINTF
) $(DOPRINT
) $(CLIB
) \
553 ..
/libiberty
/libiberty.a
555 # Likewise, for use in the tools that must run on this machine
556 # even if we are cross-building GCC.
557 HOST_LIBS
= $(USE_HOST_OBSTACK
) $(USE_HOST_ALLOCA
) $(USE_HOST_MALLOC
) \
558 $(USE_HOST_VFPRINTF
) $(USE_HOST_DOPRINT
) $(HOST_CLIB
)
560 HOST_RTL
= $(HOST_PREFIX
)rtl.o
$(HOST_PREFIX
)bitmap.o
561 HOST_RTLANAL
= $(HOST_PREFIX
)rtlanal.o
562 HOST_PRINT
= $(HOST_PREFIX
)print-rtl.o
564 # Specify the directories to be searched for header files.
565 # Both . and srcdir are used, in that order,
566 # so that tm.h and config.h will be found in the compilation
567 # subdirectory rather than in the source directory.
568 INCLUDES
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-I
$(srcdir)/..
/include
570 # Always use -I$(srcdir)/config when compiling.
572 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $<
574 # This tells GNU make version 3 not to export all the variables
575 # defined in this file into the environment.
578 # Support for additional languages (other than c and objc).
579 # ??? objc can be supported this way too (leave for later).
581 # These next lines are overridden by configure.
582 LANG_MAKEFILES
= @all_lang_makefiles@
583 LANG_STAGESTUFF
= @all_stagestuff@
584 LANG_DIFF_EXCLUDES
= @all_diff_excludes@
585 LANG_LIB2FUNCS
= @all_lib2funcs@
586 LANG_EXTRA_HEADERS
= @all_headers@
588 # Flags to pass to recursive makes.
589 # CC is set by configure. Hosts without symlinks need special handling
590 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
592 # ??? The choices here will need some experimenting with.
594 "AR_FLAGS=$(AR_FOR_TARGET_FLAGS)" \
595 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
597 "BISONFLAGS=$(BISONFLAGS)" \
598 "CC=@cc_set_by_configure@" \
601 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
602 "LDFLAGS=$(LDFLAGS)" \
604 "LEXFLAGS=$(LEXFLAGS)" \
607 "MAKEINFO=$(MAKEINFO)" \
608 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
609 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
610 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
612 "STAGE_PREFIX=@stage_prefix_set_by_configure@" \
614 "build_exeext=$(build_exeext)" \
616 "exec_prefix=$(exec_prefix)" \
618 "local_prefix=$(local_prefix)" \
619 "gxx_include_dir=$(gxx_include_dir)" \
620 "tooldir=$(tooldir)" \
622 "libsubdir=$(libsubdir)"
624 # Lists of files for various purposes.
626 # Language-specific object files for C and Objective C.
627 C_AND_OBJC_OBJS
= c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
628 c-aux-info.o c-common.o c-iterate.o @extra_c_objs@
630 # Language-specific object files for C.
631 C_OBJS
= c-parse.o c-lang.o
$(C_AND_OBJC_OBJS
)
633 SCHED_PREFIX
= @sched_prefix@
634 SCHED_CFLAGS
= @sched_cflags@
636 # Language-independent object files.
637 OBJS
= toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
638 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \
639 varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o real.o regmove.o \
640 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o \
641 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
642 regclass.o local-alloc.o global.o reload.o reload1.o caller-save.o gcse.o \
643 insn-peep.o reorg.o
$(SCHED_PREFIX
)sched.o final.o recog.o reg-stack.o \
644 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o \
645 profile.o insn-attrtab.o
$(out_object_file
) getpwd.o
$(EXTRA_OBJS
) convert.o \
646 mbchar.o dyn-string.o
648 # GEN files are listed separately, so they can be built before doing parallel
649 # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
650 # them before rtl.o is compiled.
651 GEN
= genemit genoutput genrecog genextract genflags gencodes genconfig \
652 genpeep gengenrtl gencheck
656 # Files to be copied away after each stage in building.
657 STAGESTUFF
= *$(objext
) insn-flags.h insn-config.h insn-codes.h \
658 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
659 insn-attr.h insn-attrtab.c insn-opinit.c genrtl.c genrtl.h tree-check.h \
660 s-flags s-config s-codes s-mlib s-under\
661 s-output s-recog s-emit s-extract s-peep s-check \
662 s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
663 genemit
$(build_exeext
) genoutput
$(build_exeext
) genrecog
$(build_exeext
) \
664 genextract
$(build_exeext
) genflags
$(build_exeext
) gencodes
$(build_exeext
) \
665 genconfig
$(build_exeext
) genpeep
$(build_exeext
) genattrtab
$(build_exeext
) \
666 genattr
$(build_exeext
) genopinit
$(build_exeext
) gengenrtl
$(build_exeext
) \
667 gencheck
$(build_exeext
) \
668 xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
) \
669 $(EXTRA_PARTS
) $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
670 $(CCCP
)$(exeext
) cc1obj
$(exeext
) enquire
$(exeext
) \
671 protoize
$(exeext
) unprotoize
$(exeext
) \
672 specs collect2
$(exeext
) $(USE_COLLECT2
) underscore.c \
674 *.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop \
675 *.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.gcse \
679 # Members of libgcc1.a.
680 LIB1FUNCS
= _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
681 _lshrsi3 _ashrsi3 _ashlsi3 \
682 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
683 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
684 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
685 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
686 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
688 # Library members defined in libgcc2.c.
689 LIB2FUNCS
= _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
690 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
691 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
692 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
693 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
694 _fixtfdi _fixunstfdi _floatditf \
695 __gcc_bcmp _varargs __dummy _eprintf \
696 _bb _shtab _clear_cache _trampoline __main _exit \
701 FPBIT_FUNCS
= _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
702 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
703 _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
706 DPBIT_FUNCS
= _pack_df _unpack_df _addsub_df _mul_df _div_df \
707 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
708 _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
711 # The files that "belong" in CONFIG_H are deliberately omitted
712 # because having them there would not be useful in actual practice.
713 # All they would do is cause complete recompilation every time
714 # one of the machine description files is edited.
715 # That may or may not be what one wants to do.
716 # If it is, rm *.o is an easy way to do it.
717 # CONFIG_H = $(host_xm_file) $(tm_file)
719 RTL_BASE_H
= rtl.h rtl.def gansidecl.h machmode.h machmode.def
720 RTL_H
= $(RTL_BASE_H
) genrtl.h
721 TREE_H
= tree.h real.h tree.def gansidecl.h machmode.h machmode.def tree-check.h
722 BASIC_BLOCK_H
= basic-block.h bitmap.h
723 DEMANGLE_H
= demangle.h gansidecl.h
724 RECOG_H
= recog.h gansidecl.h
725 EXPR_H
= expr.h insn-codes.h
726 REGS_H
= regs.h varray.h machmode.h machmode.def gansidecl.h
728 # Language makefile fragments.
730 # The following targets define the interface between us and the languages.
732 # all.build, all.cross, start.encap, rest.encap,
734 # install-normal, install-common, install-info, install-man,
735 # uninstall, distdir,
736 # mostlyclean, clean, distclean, extraclean, maintainer-clean,
737 # stage1, stage2, stage3, stage4
739 # Each language is linked in with a series of hooks (since we can't use `::'
740 # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
741 # Configure computes and adds these here.
746 # sed inserts language fragments after the following line.
747 ####language fragments
750 # End of language makefile fragments.
752 # The only suffixes we want for implicit rules are .c and .o, so clear
753 # the list and add them. This speeds up GNU Make, and allows -r to work.
757 Makefile
: $(srcdir)/Makefile.in config.status
$(srcdir)/version.c \
758 $(xmake_file
) $(tmake_file
) $(LANG_MAKEFILES
)
759 $(SHELL
) $(srcdir)/configure.frag
$(srcdir) "$(SUBDIRS)" \
760 "$(xmake_file)" "$(tmake_file)"
761 cp config.status config.run
765 $(srcdir)/configure
: $(srcdir)/configure.in
766 cd
$(srcdir); autoconf
768 # cstamp-h.in controls rebuilding of config.in.
769 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
770 # delete it. A stamp file is needed as autoheader won't update the file if
771 # nothing has changed.
772 # It remains in the source directory and is part of the distribution.
773 # This follows what is done in shellutils, fileutils, etc.
774 # "echo timestamp" is used instead of touch to be consistent with other
775 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
776 # ??? Newer versions have a maintainer mode that may be useful here.
777 $(srcdir)/config.in
: $(srcdir)/cstamp-h.in
778 $(srcdir)/cstamp-h.in
: $(srcdir)/configure.in
$(srcdir)/acconfig.h
779 cd
$(srcdir) && autoheader
780 @
rm -f
$(srcdir)/cstamp-h.in
781 echo timestamp
> $(srcdir)/cstamp-h.in
782 auto-host.h
: cstamp-h
; @true
783 cstamp-h
: config.in config.status
784 CONFIG_HEADERS
=auto-host.h
:config.in
$(SHELL
) config.status
786 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
787 # a target to build even if it is up-to-date. So we must verify that
788 # config.status does not exist before failing.
789 config.status
: configure version.c
790 @if
[ ! -f config.status
] ; then \
791 echo You must configure gcc. Look at the INSTALL file for details.
; \
794 $(SHELL
) config.status
--recheck
; \
797 all.internal
: start.encap rest.encap
798 # This is what to compile if making a cross-compiler.
799 # Note that we can compile enquire using the cross-compiler just built,
800 # although we can't run it on this machine.
801 all.cross
: native gcc-cross specs stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) \
802 $(LIBGCC1_TEST
) $(EXTRA_PARTS
) lang.
all.cross
803 # This is what to compile if making gcc with a cross-compiler.
804 all.build
: native xgcc
$(exeext
) $(EXTRA_PARTS
) lang.
all.build
805 # This is what must be made before installing GCC and converting libraries.
806 start.encap
: native xgcc
$(exeext
) specs
$(LIBGCC1
) xlimits.h lang.start.encap
807 # These can't be made until after GCC can run.
808 rest.encap
: stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) $(EXTRA_PARTS
) lang.rest.encap
809 # This is what is made with the host's compiler
810 # whether making a cross compiler or not.
811 native
: config.status auto-host.h
cpp$(exeext
) $(LANGUAGES
) \
812 $(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
)
814 # Define the names for selecting languages in LANGUAGES.
818 # Tell GNU make these are phony targets.
819 .PHONY
: C c PROTO proto
821 # On the target machine, finish building a cross compiler.
822 # This does the things that can't be done on the host machine.
823 rest.cross
: $(LIBGCC
) gfloat.h specs
825 # Verify that it works to compile and link libgcc1-test.
826 # If it does, then there are sufficient replacements for libgcc1.a.
827 libgcc1-test
: libgcc1-test.o native
$(GCC_PARTS
)
828 @echo
"Testing libgcc1. Ignore linker warning messages."
829 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) libgcc1-test.o
-o libgcc1-test \
830 -nostartfiles
-nostdlib
`$(GCC_FOR_TARGET) --print-libgcc-file-name`
831 libgcc1-test.o
: libgcc1-test.c native xgcc
$(exeext
)
832 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) -c
$(srcdir)/libgcc1-test.c
834 # Recompile all the language-independent object files.
835 # This is used only if the user explicitly asks for it.
836 compilations
: ${OBJS}
838 # Create a list of the language-independent object files so the language
839 # subdirectories needn't mention their names explicitly.
840 stamp-objlist
: $(OBJS
)
841 echo
" $(OBJS)" | sed
-e
's, \([a-z0-9]\), ../\1,g' -e
's/\.o/$(objext)/g' >stamp-objlist
843 # We call this executable `xgcc' rather than `gcc'
844 # to avoid confusion if the current directory is in the path
845 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
846 xgcc
$(exeext
): gcc.o version.o choose-temp.o pexecute.o
prefix.o version.o \
847 mkstemp.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
848 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o
prefix.o version.o \
849 choose-temp.o pexecute.o mkstemp.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
851 # Dump a specs file to make -B./ read these specs over installed ones.
853 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
856 # We do want to create an executable named `xgcc', so we can use it to
858 # Also create gcc-cross, so that install-common will install properly.
859 gcc-cross
: xgcc
$(exeext
)
860 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
862 cc1
$(exeext
): $(P
) $(C_OBJS
) $(OBJS
) $(LIBDEPS
)
863 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(C_OBJS
) $(OBJS
) $(LIBS
)
865 # Copy float.h from its source.
868 cp
$(FLOAT_H
) gfloat.h
870 # Build the version of limits.h that we will install.
871 xlimits.h
: glimits.h limitx.h limity.h
872 if
$(LIMITS_H_TEST
) ; then \
873 cat
$(srcdir)/limitx.h
$(srcdir)/glimits.h
$(srcdir)/limity.h
> tmp-xlimits.h
; \
875 cat
$(srcdir)/glimits.h
> tmp-xlimits.h
; \
877 mv tmp-xlimits.h xlimits.h
880 # This is done in two parts because some functions, in libgcc1.c,
881 # must be compiled with something other than GCC,
882 # while the rest, in libgcc2.c, must be compiled with xgcc.
883 # That means we can't do libgcc2.c until after xgcc, cc1, etc.
885 # Use this as value of LIBGCC1 to cause conversion to GNU library format.
886 # LIBCONVERT should put its output in libgcc1.conv.
887 libgcc1.conv
: libgcc1.a
888 $(LIBCONVERT
) libgcc1.a libgcc1.conv
890 # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
891 # Make an empty file instead.
892 libgcc1.null
: $(GCC_PASSES
)
893 echo
"void __foo () {}" > dummy.c
894 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) -c dummy.c
895 $(OLDAR
) $(OLDAR_FLAGS
) libgcc1.null dummy
$(objext
)
896 rm -f dummy
$(objext
) dummy.c
898 # This is $(LIBGCC1) for a cross-compiler.
899 # We have no automatic way of building libgcc1.a,
900 # so it's up to the installer to find a way to do that.
901 # This rule deliberately does not depend on libgcc1.a
902 # so that it will fail if the installer hasn't provided it.
904 mv libgcc1.a libgcc1.cross ||
(echo You must find a way to make libgcc1.a
; false
)
906 # Compile the library of arithmetic subroutines with the native compiler.
907 # Don't compile it with GCC!
908 # (That would cause most arithmetic functions to call themselves.)
910 # NOTE: If you modify these rules substantially, please be sure to
911 # check at least config/i386/t-sco5 and possibly other makefile
913 libgcc1.a
: libgcc1.c
$(CONFIG_H
) $(LIB1FUNCS_EXTRA
) config.status
915 # Actually build it in tmplibgcc1.a, then rename at end,
916 # so that libgcc1.a itself remains nonexistent if compilation is aborted.
917 # -e causes any failing command to make this rule fail.
918 # -e doesn't work in certain shells, so we test $$? as well.
919 # lynx has a broken ar, it always complains when the initial library is
920 # empty, thus this command works only if we don't do -e
921 # There is a trailing backslash (\) deleted from the following line.
923 for name in
$(LIB1FUNCS
); \
926 rm -f
$${name}$(objext
); \
927 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
-DL
$${name} $(srcdir)/libgcc1.c
; \
928 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
929 mv libgcc1
$(objext
) $${name}$(objext
); \
930 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
931 rm -f
$${name}$(objext
); \
933 # Some shells crash when a loop has no items.
934 # So make sure there is always at least one--`..'.
936 # We don't use -e here because there are if statements
937 # that should not make the command give up when the if condition is false.
938 # Instead, we test for failure after each command where it matters.
939 for file in ..
$(LIB1FUNCS_EXTRA
); \
941 if
[ x
$${file} != x..
]; then \
942 name
=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
944 if
[ $${name}.asm
= $${file} ]; then \
945 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
947 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
$${file}; \
948 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
949 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
950 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
951 rm -f
$${name}.s
$${name}$(objext
); \
955 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) tmplibgcc1.a
; else true
; fi
956 mv tmplibgcc1.a libgcc1.a
958 # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
959 # functions. LIB1ASMSRC is the name of the source file in the config
961 libgcc1-asm.a
: libgcc2.ready config.status
$(srcdir)/config
/$(LIB1ASMSRC
)
962 -rm -f tmplibgcc1.a libgcc1.S
963 cp
$(srcdir)/config
/$(LIB1ASMSRC
) libgcc1.S
964 # Actually build it in tmplibgcc1.a, then rename at end,
965 # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
966 # -e causes any failing command to make this rule fail.
967 # -e doesn't work in certain shells, so we test $$? as well.
968 # lynx has a broken ar, it always complains when the initial library is
969 # empty, thus this command works only if we don't do -e
970 # There is a trailing backslash (\) deleted from the following line.
972 for name in
$(LIB1ASMFUNCS
); \
975 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} libgcc1.S
; \
976 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
977 mv libgcc1
$(objext
) $${name}$(objext
); \
978 $(AR
) $(AR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
979 rm -f
$${name}$(objext
); \
982 mv tmplibgcc1.a libgcc1-asm.a
984 # Generate assembly versions of the functions required for libgcc1.
985 # You'll still need to massage the code by hand (possibly hacking
986 # underscores and local labels) but this will get you started.
987 libgcc1.S
: libgcc1.c
$(CONFIG_H
) config.status
990 for name in
$(LIB1FUNCS
); \
993 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -S
-DL
$${name} $(srcdir)/libgcc1.c
; \
994 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
995 echo
'#ifdef ' L
$${name} >> libgcc1.S
; \
996 cat libgcc1.s
>> libgcc1.S
; \
997 echo
'#endif /*' L
$${name} '*/' >> libgcc1.S
; \
998 echo
"" >> libgcc1.S
; \
1001 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
1002 # But recompiling cc1 should not force recompilation of libgcc2.a.
1003 # If you want to force recompilation, delete libgcc2.a.
1004 libgcc2.ready
: $(GCC_PASSES
) $(LIBGCC2_DEPS
) stmp-int-hdrs
$(STMP_FIXPROTO
)
1005 -if
[ -f libgcc2.ready
] ; then \
1008 touch libgcc2.ready
; \
1011 LIB2ADD
= $(srcdir)/frame.c
$(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
)
1012 libgcc2.a
: libgcc2.c libgcc2.ready
$(CONFIG_H
) $(FPBIT
) $(DPBIT
) $(LIB2ADD
) \
1013 machmode.h longlong.h frame.h gansidecl.h gbl-ctors.h config.status
1014 # Actually build it in tmplibgcc2.a, then rename at end,
1015 # so that libgcc2.a itself remains nonexistent if compilation is aborted.
1017 # -e causes any failing command to make this rule fail.
1018 # -e doesn't work in certain shells, so we test $$? as well.
1019 # lynx has a broken ar, it always complains when the initial library is
1020 # empty, thus this command works only if we don't do -e
1021 # There is a trailing backslash (\) deleted from the following line.
1023 for name in
$(LIB2FUNCS
); \
1026 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1027 $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1028 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1029 $(AR
) $(AR_FLAGS
) tmplibgcc2.a
$${name}$(objext
); \
1030 rm -f
$${name}$(objext
); \
1032 for name in
$(LIB2FUNCS_EH
); \
1035 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) -fexceptions
$(INCLUDES
) -c \
1036 -DL
$${name} $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1037 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1038 $(AR
) $(AR_FLAGS
) tmplibgcc2.a
$${name}$(objext
); \
1039 rm -f
$${name}$(objext
); \
1041 if
[ x
$(FPBIT
) != x
]; then \
1042 for name in
$(FPBIT_FUNCS
); \
1045 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1046 -DFINE_GRAINED_LIBRARIES
$(FPBIT
) -o
$${name}$(objext
); \
1047 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1048 $(AR
) $(AR_FLAGS
) tmplibgcc2.a
$${name}$(objext
); \
1049 rm -f
$${name}$(objext
); \
1052 if
[ x
$(DPBIT
) != x
]; then \
1053 for name in
$(DPBIT_FUNCS
); \
1056 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1057 -DFINE_GRAINED_LIBRARIES
$(DPBIT
) -o
$${name}$(objext
); \
1058 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1059 $(AR
) $(AR_FLAGS
) tmplibgcc2.a
$${name}$(objext
); \
1060 rm -f
$${name}$(objext
); \
1063 # Some shells crash when a loop has no items.
1064 # So make sure there is always at least one--`..'.
1066 # We don't use -e here because there are if statements
1067 # that should not make the command give up when the if condition is false.
1068 # Instead, we test for failure after each command where it matters.
1069 for file in
$(LIB2ADD
); do \
1070 name
=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
1071 oname
=` echo $${name} | sed -e 's,.*/,,'`; \
1072 if
[ $${name}.txt
= $${file} ]; then \
1073 for f in ..
`cat $${file}`; do if
[ x
$${f} != x..
]; then \
1074 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1075 AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" CC
="$(CC)" \
1076 CFLAGS
="$(CFLAGS)" HOST_PREFIX
="$(HOST_PREFIX)" \
1077 HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1078 LANGUAGES
="$(LANGUAGES)" \
1079 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $${f}; \
1080 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1081 $(AR
) $(AR_FLAGS
) tmplibgcc2.a
$${f}; \
1087 if
[ $${name}.asm
= $${file} ]; then \
1088 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
1090 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
$${file}; \
1091 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1092 $(AR
) $(AR_FLAGS
) tmplibgcc2.a
$${oname}$(objext
); \
1093 rm -f
$${name}.s
$${oname}$(objext
); \
1096 mv tmplibgcc2.a libgcc2.a
1097 # These lines were deleted from above the mv command
1098 # because ranlibing libgcc.a itself should suffice.
1099 # -if [ x${HPUX_GAS} = x ] ; then \
1100 # if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc2.a; else true; fi; \
1103 # Combine the various libraries into a single library, libgcc.a.
1104 libgcc.a
: $(LIBGCC1
) $(LIBGCC2
)
1105 -rm -rf tmplibgcc.a libgcc.a tmpcopy
1107 -if
[ x
$(LIBGCC1
) != x
]; \
1108 then
(cd tmpcopy
; $(AR
) x ..
/$(LIBGCC1
)); \
1111 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1112 # unwritable table of contents file, and then print an error message when
1113 # the second ar command tries to overwrite this file. To avoid the error
1114 # message from ar, we make sure all files are writable.
1115 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1116 (cd tmpcopy
; $(AR
) x ..
/$(LIBGCC2
))
1117 (cd tmpcopy
; $(AR
) $(AR_FLAGS
) ..
/tmplibgcc.a
*$(objext
))
1119 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) tmplibgcc.a
; else true
; fi
1120 # Actually build it in tmplibgcc.a, then rename at end,
1121 # so that libgcc.a itself remains nonexistent if compilation is aborted.
1122 mv tmplibgcc.a libgcc.a
1124 # Use the genmultilib shell script to generate the information the gcc
1125 # driver program needs to select the library directory based on the
1127 multilib.h
: s-mlib
; @true
1128 s-mlib
: $(srcdir)/genmultilib Makefile
1129 $(SHELL
) $(srcdir)/genmultilib \
1130 "$(MULTILIB_OPTIONS)" \
1131 "$(MULTILIB_DIRNAMES)" \
1132 "$(MULTILIB_MATCHES)" \
1133 "$(MULTILIB_EXCEPTIONS)" \
1134 "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
1135 $(srcdir)/move-if-change tmp-mlib.h multilib.h
1138 # Build multiple copies of libgcc.a, one for each target switch.
1139 stmp-multilib
: $(LIBGCC1
) libgcc2.c libgcc2.ready
$(CONFIG_H
) \
1140 frame.h gansidecl.h \
1141 $(LIB2ADD
) machmode.h longlong.h gbl-ctors.h config.status
1142 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
1143 dir=`echo $$i | sed -e 's/;.*$$//'`; \
1144 flags
=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
1145 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1146 AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1147 RANLIB
="$(RANLIB)" RANLIB_TEST
="$(RANLIB_TEST)" \
1148 LANGUAGES
="$(LANGUAGES)" \
1149 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1150 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS) $${flags}" \
1151 MULTILIB_CFLAGS
="$${flags}" \
1152 LIBGCC1
="$(LIBGCC1)" LIBGCC2
="$(LIBGCC2)" \
1153 dir="$${dir}" stmp-multilib-sub
; \
1154 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1158 # Subroutine of stmp-multilib so make -n works.
1161 if
[ -d
$(dir) ]; then \
1163 rm -f libgcc.a
$(EXTRA_MULTILIB_PARTS
); \
1166 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1167 AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1168 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1169 LANGUAGES
="$(LANGUAGES)" \
1170 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC2
)
1171 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1173 else rm -f
$(LIBGCC1
); \
1175 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1178 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1179 AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1180 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1181 LANGUAGES
="$(LANGUAGES)" \
1182 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC1
); \
1184 rm -rf tmplibgcc.a tmpcopy
1186 if
[ x
$(LIBGCC1
) != x
]; \
1187 then
(cd tmpcopy
; $(AR
) x ..
/$(LIBGCC1
)); \
1190 (cd tmpcopy
; $(AR
) x ..
/$(LIBGCC2
))
1191 (cd tmpcopy
; $(AR
) $(AR_FLAGS
) ..
/tmplibgcc.a
*$(objext
))
1192 rm -rf libgcc2.a tmpcopy
1193 if
$(RANLIB_TEST
) ; then
$(RANLIB
) tmplibgcc.a
; else true
; fi
1194 if
[ -d
$(dir) ]; then true
; else mkdir
$(dir); fi
1195 mv tmplibgcc.a
$(dir)/libgcc.a
1196 for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
1197 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1198 AR
="$(AR)" AR_FLAGS
="$(AR_FLAGS)" CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1199 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1200 LANGUAGES
="$(LANGUAGES)" \
1201 MULTILIB_CFLAGS
="$(MULTILIB_CFLAGS)" T
="t" t
$${f}; \
1202 mv t
$${f} $(dir)/$${f}; \
1206 # Compile two additional files that are linked with every program
1207 # linked using GCC on systems using COFF or ELF, for the sake of C++
1209 $(T
)crtbegin.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1210 defaults.h frame.h gbl-ctors.h
1211 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1212 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1213 -c
$(srcdir)/crtstuff.c
-DCRT_BEGIN
-o
$(T
)crtbegin
$(objext
)
1215 $(T
)crtend.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1216 defaults.h frame.h gbl-ctors.h
1217 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1218 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1219 -c
$(srcdir)/crtstuff.c
-DCRT_END
-o
$(T
)crtend
$(objext
)
1221 # On some systems we also want to install versions of these files
1222 # compiled using PIC for use in shared libraries.
1223 crtbeginS.o crtendS.o
: s-crtS
; @true
1225 s-crtS
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1226 defaults.h frame.h gbl-ctors.h
1227 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1228 -DCRT_BEGIN
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1229 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
1230 mv crtstuff
$(objext
) crtbeginS
$(objext
)
1231 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1232 -DCRT_END
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1233 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
-o crtendS
$(objext
)
1236 # Compile the start modules crt0.o and mcrt0.o that are linked with every program
1237 crt0.o
: s-crt0
; @true
1238 mcrt0.o
: s-crt0
; @true
1240 s-crt0
: $(CRT0_S
) $(MCRT0_S
) $(GCC_PASSES
) $(CONFIG_H
)
1241 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1242 -o crt0.o
-c
$(CRT0_S
)
1243 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1244 -o mcrt0.o
-c
$(MCRT0_S
)
1247 # Compiling object files from source files.
1249 # Note that dependencies on obstack.h are not written
1250 # because that file is not part of GCC.
1252 # C language specific files.
1254 c-parse.o
: $(srcdir)/c-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h \
1255 $(srcdir)/c-parse.h c-tree.h input.h flags.h system.h toplev.h
1256 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/c-parse.c
1257 $(srcdir)/c-parse.h
: $(srcdir)/c-parse.c
1258 $(srcdir)/c-parse.c
: $(srcdir)/c-parse.y
1259 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d c-parse.y
-o c-parse.c
1260 $(srcdir)/c-parse.y
: c-parse.in
1261 echo
'/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1262 sed
-e
"/^ifobjc$$/,/^end ifobjc$$/d" \
1263 -e
"/^ifc$$/d" -e
"/^end ifc$$/d" \
1264 $(srcdir)/c-parse.in
>>tmp-c-parse.y
1265 $(srcdir)/move-if-change tmp-c-parse.y
$(srcdir)/c-parse.y
1267 $(srcdir)/c-gperf.h
: c-parse.gperf
1268 gperf
-p
-j1
-i
1 -g
-o
-t
-G
-N is_reserved_word
-k1
,3,$$ \
1269 $(srcdir)/c-parse.gperf
>tmp-gperf.h
1270 $(srcdir)/move-if-change tmp-gperf.h
$(srcdir)/c-gperf.h
1272 c-decl.o
: c-decl.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h flags.h \
1274 c-typeck.o
: c-typeck.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h flags.h \
1275 output.h
$(EXPR_H
) $(RTL_H
) toplev.h
1276 c-lang.o
: c-lang.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h toplev.h \
1278 c-lex.o
: c-lex.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-lex.h c-tree.h \
1279 $(srcdir)/c-parse.h input.h flags.h
$(srcdir)/c-gperf.h c-pragma.h \
1280 toplev.h output.h mbchar.h
1281 c-aux-info.o
: c-aux-info.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h flags.h
1282 c-convert.o
: c-convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h
1283 c-pragma.o
: c-pragma.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) except.h \
1284 function.h defaults.h c-pragma.h toplev.h
1285 c-iterate.o
: c-iterate.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-tree.h \
1286 flags.h toplev.h
$(EXPR_H
)
1287 mbchar.o
: mbchar.c
$(CONFIG_H
) system.h gansidecl.h mbchar.h
1289 collect2
$(exeext
): collect2.o tlink.o hash.o cplus-dem.o underscore.o \
1290 version.o choose-temp.o mkstemp.o
$(LIBDEPS
)
1291 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1292 -rm -f collect2
$(exeext
)
1293 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ collect2.o tlink.o hash.o \
1294 cplus-dem.o underscore.o version.o choose-temp.o mkstemp.o
$(LIBS
)
1296 collect2.o
: collect2.c
$(CONFIG_H
) system.h gansidecl.h gstab.h \
1297 $(srcdir)/..
/include/obstack.h
$(DEMANGLE_H
)
1298 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1299 -DTARGET_MACHINE
=\"$(target_alias
)\" $(MAYBE_USE_COLLECT2
) \
1300 -c
`echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1302 tlink.o
: tlink.c
$(DEMANGLE_H
) hash.h
$(CONFIG_H
) system.h toplev.h
1303 hash.o
: hash.c hash.h system.h toplev.h
1305 cplus-dem.o
: $(srcdir)/..
/libiberty
/cplus-dem.c
$(DEMANGLE_H
)
1307 $(LN_S
) $(srcdir)/..
/libiberty
/cplus-dem.c cplus-dem.c
1308 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) cplus-dem.c
1310 pexecute.o
: $(srcdir)/..
/libiberty
/pexecute.c
$(CONFIG_H
) system.h gansidecl.h
1312 $(LN_S
) $(srcdir)/..
/libiberty
/pexecute.c pexecute.c
1313 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) pexecute.c
1315 vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
$(CONFIG_H
) system.h gansidecl.h
1317 $(LN_S
) $(srcdir)/..
/libiberty
/vfprintf.c vfprintf.c
1318 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) vfprintf.c
1320 underscore.c
: s-under
; @true
1322 s-under
: $(GCC_PASSES
)
1323 echo
"int xxy_us_dummy;" >tmp-dum.c
1324 $(GCC_FOR_TARGET
) -S tmp-dum.c
1325 echo
'/*WARNING: This file is automatically generated!*/' >tmp-under.c
1326 if grep _xxy_us_dummy tmp-dum.s
> /dev
/null
; then \
1327 echo
"int prepends_underscore = 1;" >>tmp-under.c
; \
1329 echo
"int prepends_underscore = 0;" >>tmp-under.c
; \
1331 $(srcdir)/move-if-change tmp-under.c underscore.c
1332 -rm -f tmp-dum.c tmp-dum.s
1335 # A file used by all variants of C.
1337 c-common.o
: c-common.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h \
1338 flags.h toplev.h output.h
1340 # Language-independent files.
1343 -DSTANDARD_STARTFILE_PREFIX
=\"$(unlibsubdir
)/\" \
1344 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc-lib
/\" \
1345 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
1346 -DDEFAULT_TARGET_MACHINE
=\"$(target_alias
)\" \
1347 -DTOOLDIR_BASE_PREFIX
=\"$(unlibsubdir
)/..
/\"
1348 gcc.o
: gcc.c
$(CONFIG_H
) system.h gansidecl.h multilib.h Makefile \
1350 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1352 -c
`echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1354 tree-check.h
: s-check
; @true
1355 s-check
: gencheck
$(srcdir)/move-if-change
1356 .
/gencheck
> tmp-check.h
1357 $(srcdir)/move-if-change tmp-check.h tree-check.h
1360 gencheck
: gencheck.o tree.def
$(lang_tree_files
) $(HOST_LIBDEPS
)
1361 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1362 gencheck.o
$(HOST_LIBS
)
1364 gencheck.o
: gencheck.c hconfig.h system.h
1365 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencheck.c
1367 dumpvers
: dumpvers.c
1369 version.o
: version.c
1370 obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
$(CONFIG_H
)
1372 $(LN_S
) $(srcdir)/..
/libiberty
/obstack.c obstack.c
1373 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) obstack.c
1375 choose-temp.o
: $(srcdir)/..
/libiberty
/choose-temp.c
$(CONFIG_H
) gansidecl.h \
1378 $(LN_S
) $(srcdir)/..
/libiberty
/choose-temp.c choose-temp.c
1379 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) choose-temp.c
1381 mkstemp.o
: $(srcdir)/..
/libiberty
/mkstemp.c
$(CONFIG_H
) gansidecl.h system.h
1383 $(LN_S
) $(srcdir)/..
/libiberty
/mkstemp.c mkstemp.c
1384 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) mkstemp.c
1386 prefix.o
: prefix.c
$(CONFIG_H
) system.h gansidecl.h Makefile
1387 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1388 -DPREFIX
=\"$(prefix)\" \
1389 -c
`echo $(srcdir)/prefix.c | sed 's,^\./,,'`
1391 convert.o
: convert.c
$(CONFIG_H
) $(TREE_H
) flags.h convert.h toplev.h
1393 tree.o
: tree.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h function.h toplev.h except.h
1394 print-tree.o
: print-tree.c
$(CONFIG_H
) system.h
$(TREE_H
)
1395 stor-layout.o
: stor-layout.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h \
1396 function.h
$(EXPR_H
) $(RTL_H
) toplev.h except.h
1397 fold-const.o
: fold-const.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h \
1399 toplev.o
: toplev.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) \
1400 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1401 insn-codes.h insn-config.h
$(RECOG_H
) Makefile toplev.h dwarfout.h \
1402 dwarf2out.h sdbout.h dbxout.h
$(EXPR_H
) \
1403 $(lang_options_files
)
1404 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(MAYBE_USE_COLLECT2
) \
1405 -DTARGET_NAME
=\"$(target_alias
)\" \
1406 -c
`echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1408 rtl.o
: rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1410 print-rtl.o
: print-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1411 rtlanal.o
: rtlanal.c
$(CONFIG_H
) system.h
$(RTL_H
)
1413 varasm.o
: varasm.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h \
1414 function.h defaults.h
$(EXPR_H
) hard-reg-set.h
$(REGS_H
) \
1415 xcoffout.h output.h c-pragma.h toplev.h except.h dbxout.h sdbout.h
1416 function.o
: function.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1417 function.h insn-flags.h insn-codes.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1418 insn-config.h
$(RECOG_H
) output.h toplev.h except.h
1419 stmt.o
: stmt.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1420 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h
$(EXPR_H
) except.h \
1421 loop.h
$(RECOG_H
) toplev.h output.h
1422 except.o
: except.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1423 function.h insn-flags.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1424 insn-config.h
$(RECOG_H
) output.h except.h toplev.h
1425 expr.o
: expr.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1426 $(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h
$(RECOG_H
) output.h \
1427 typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h
1428 calls.o
: calls.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h
$(EXPR_H
) \
1429 insn-flags.h
$(REGS_H
) toplev.h output.h
1430 expmed.o
: expmed.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1431 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) real.h
1432 explow.o
: explow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1433 hard-reg-set.h insn-config.h
$(EXPR_H
) $(RECOG_H
) insn-flags.h insn-codes.h
1434 optabs.o
: optabs.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1435 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) reload.h
1436 dbxout.o
: dbxout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h
$(REGS_H
) \
1437 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
1439 sdbout.o
: sdbout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h except.h \
1440 function.h
$(EXPR_H
) output.h hard-reg-set.h
$(REGS_H
) defaults.h real.h \
1441 insn-config.h
$(srcdir)/..
/include/obstack.h xcoffout.h c-pragma.h \
1443 dwarfout.o
: dwarfout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf.h \
1444 flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
1445 dwarf2out.o
: dwarf2out.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf2.h \
1446 flags.h insn-config.h reload.h output.h defaults.h \
1447 hard-reg-set.h
$(REGS_H
) $(EXPR_H
) toplev.h dwarf2out.h dyn-string.h
1448 xcoffout.o
: xcoffout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) xcoffout.h \
1449 flags.h toplev.h output.h dbxout.h
1450 emit-rtl.o
: emit-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1451 except.h function.h
$(REGS_H
) insn-config.h
$(RECOG_H
) real.h \
1452 $(EXPR_H
) $(srcdir)/..
/include/obstack.h hard-reg-set.h bitmap.h
1453 real.o
: real.c
$(CONFIG_H
) system.h
$(TREE_H
) toplev.h
1454 getpwd.o
: getpwd.c
$(CONFIG_H
) system.h
1456 integrate.o
: integrate.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1457 integrate.h insn-flags.h insn-config.h
$(EXPR_H
) real.h
$(REGS_H
) \
1458 function.h output.h
$(RECOG_H
) except.h toplev.h
1460 jump.o
: jump.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h
$(REGS_H
) \
1461 insn-config.h insn-flags.h
$(RECOG_H
) $(EXPR_H
) real.h except.h \
1463 stupid.o
: stupid.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1464 $(BASIC_BLOCK_H
) insn-config.h reload.h flags.h toplev.h
1466 cse.o
: cse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1467 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) toplev.h output.h
1468 gcse.o
: gcse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1469 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
) output.h
1470 profile.o
: profile.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-flags.h \
1471 gcov-io.h
$(TREE_H
) output.h
$(REGS_H
) toplev.h insn-config.h
1472 loop.o
: loop.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h loop.h insn-config.h \
1473 insn-flags.h
$(REGS_H
) hard-reg-set.h
$(RECOG_H
) $(EXPR_H
) real.h \
1475 unroll.o
: unroll.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1476 integrate.h
$(REGS_H
) $(RECOG_H
) flags.h
$(EXPR_H
) loop.h toplev.h
1477 flow.o
: flow.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-config.h \
1478 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h output.h toplev.h
1479 combine.o
: combine.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1480 insn-config.h insn-flags.h insn-codes.h insn-attr.h
$(REGS_H
) $(EXPR_H
) \
1481 $(BASIC_BLOCK_H
) $(RECOG_H
) real.h hard-reg-set.h toplev.h
1482 regclass.o
: regclass.c
$(CONFIG_H
) system.h
$(RTL_H
) hard-reg-set.h flags.h \
1483 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h
$(RECOG_H
) reload.h real.h toplev.h \
1485 local-alloc.o
: local-alloc.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1486 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h
$(RECOG_H
) output.h \
1487 insn-attr.h toplev.h
1488 bitmap.o
: bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
) \
1490 global.o
: global.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h reload.h \
1491 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h output.h toplev.h
1492 varray.o
: varray.c
$(CONFIG_H
) system.h varray.h
$(RTL_H
) $(TREE_H
) bitmap.h
1494 reload.o
: reload.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h output.h
$(EXPR_H
) \
1495 reload.h
$(RECOG_H
) hard-reg-set.h insn-config.h insn-codes.h
$(REGS_H
) \
1497 reload1.o
: reload1.c
$(CONFIG_H
) system.h
$(RTL_H
) real.h flags.h
$(EXPR_H
) \
1498 reload.h
$(REGS_H
) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1499 $(BASIC_BLOCK_H
) $(RECOG_H
) output.h toplev.h
1500 caller-save.o
: caller-save.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1501 $(REGS_H
) hard-reg-set.h insn-config.h
$(BASIC_BLOCK_H
) \
1502 $(RECOG_H
) reload.h
$(EXPR_H
) toplev.h
1503 reorg.o
: reorg.c
$(CONFIG_H
) system.h
$(RTL_H
) conditions.h hard-reg-set.h \
1504 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h insn-attr.h \
1505 insn-flags.h
$(RECOG_H
) flags.h output.h
$(EXPR_H
)
1506 alias.o
: alias.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h \
1507 $(REGS_H
) toplev.h output.h
$(EXPR_H
)
1508 regmove.o
: regmove.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1509 $(RECOG_H
) output.h reload.h
$(REGS_H
) hard-reg-set.h flags.h \
1510 $(EXPR_H
) insn-flags.h
$(BASIC_BLOCK_H
) toplev.h
1511 $(SCHED_PREFIX
)sched.o
: $(SCHED_PREFIX
)sched.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1512 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1514 final.o
: final.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h
$(REGS_H
) \
1515 $(RECOG_H
) conditions.h insn-config.h insn-attr.h except.h real.h output.h \
1516 hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h defaults.h \
1517 toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h dbxout.h
1518 recog.o
: recog.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1519 $(REGS_H
) $(RECOG_H
) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1520 insn-flags.h insn-codes.h real.h
1521 reg-stack.o
: reg-stack.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) \
1522 $(REGS_H
) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h
1523 dyn-string.o
: dyn-string.c dyn-string.h
$(CONFIG_H
) system.h gansidecl.h
1525 $(out_object_file
): $(out_file
) $(CONFIG_H
) $(TREE_H
) \
1526 $(RTL_H
) $(REGS_H
) hard-reg-set.h real.h insn-config.h conditions.h \
1527 insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h
1528 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(out_file
)
1530 # Build auxiliary files that support ecoff format.
1531 mips-tfile
: mips-tfile.o version.o
$(LIBDEPS
)
1532 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tfile.o version.o
$(LIBS
)
1534 mips-tfile.o
: mips-tfile.c
$(CONFIG_H
) $(RTL_H
) system.h machmode.h
1536 mips-tdump
: mips-tdump.o version.o
$(LIBDEPS
)
1537 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tdump.o version.o
$(LIBS
)
1539 mips-tdump.o
: mips-tdump.c
$(CONFIG_H
) $(RTL_H
) system.h
1541 # Build file to support OSF/rose half-pic format.
1542 halfpic.o
: halfpic.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) system.h
1544 # Normally this target is not used; but it is used if you
1545 # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1546 # from the GNU Emacs distribution.
1547 alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1549 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c alloca.c
1550 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(ALLOCA_FLAGS
) \
1551 -c
`echo alloca.c | sed 's,^\./,,'`
1554 # Generate header and source files from the machine description,
1557 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h \
1558 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1559 insn-attr.h insn-attrtab.c
1561 # The following pair of rules has this effect:
1562 # genconfig is run only if the md has changed since genconfig was last run;
1563 # but the file insn-config.h is touched only when its contents actually change.
1565 # Each of the other insn-* files is handled by a similar pair of rules.
1567 # This causes an anomaly in the results of make -n
1568 # because insn-* is older than s-*
1569 # and thus make -n thinks that insn-* will be updated
1570 # and force recompilation of things that depend on it.
1571 # We use move-if-change precisely to avoid such recompilation.
1572 # But there is no way to teach make -n that it will be avoided.
1574 # Each of the insn-*.[ch] rules has a semicolon at the end,
1575 # for otherwise the system Make on SunOS 4.1 never tries
1576 # to recompile insn-*.o. To avoid problems and extra noise from
1577 # versions of make which don't like empty commands (nothing after the
1578 # trailing `;'), we call true for each.
1580 insn-config.h
: s-config
; @true
1581 s-config
: $(md_file
) genconfig
$(srcdir)/move-if-change
1582 .
/genconfig
$(md_file
) > tmp-config.h
1583 $(srcdir)/move-if-change tmp-config.h insn-config.h
1586 insn-flags.h
: s-flags
; @true
1587 s-flags
: $(md_file
) genflags
$(srcdir)/move-if-change
1588 .
/genflags
$(md_file
) > tmp-flags.h
1589 $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1592 insn-codes.h
: s-codes
; @true
1593 s-codes
: $(md_file
) gencodes
$(srcdir)/move-if-change
1594 .
/gencodes
$(md_file
) > tmp-codes.h
1595 $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1598 insn-emit.o
: insn-emit.c
$(CONFIG_H
) $(RTL_H
) $(EXPR_H
) real.h output.h \
1599 insn-config.h insn-flags.h insn-codes.h system.h reload.h
1600 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-emit.c
1602 insn-emit.c
: s-emit
; @true
1603 s-emit
: $(md_file
) genemit
$(srcdir)/move-if-change
1604 .
/genemit
$(md_file
) > tmp-emit.c
1605 $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1608 insn-recog.o
: insn-recog.c
$(CONFIG_H
) $(RTL_H
) insn-config.h
$(RECOG_H
) \
1609 real.h output.h flags.h system.h
1610 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-recog.c
1612 insn-recog.c
: s-recog
; @true
1613 s-recog
: $(md_file
) genrecog
$(srcdir)/move-if-change
1614 .
/genrecog
$(md_file
) > tmp-recog.c
1615 $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1618 insn-opinit.o
: insn-opinit.c
$(CONFIG_H
) $(RTL_H
) insn-codes.h insn-flags.h \
1619 insn-config.h flags.h
$(RECOG_H
) $(EXPR_H
) reload.h system.h
1620 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-opinit.c
1622 insn-opinit.c
: s-opinit
; @true
1623 s-opinit
: $(md_file
) genopinit
$(srcdir)/move-if-change
1624 .
/genopinit
$(md_file
) > tmp-opinit.c
1625 $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1628 insn-extract.o
: insn-extract.c
$(CONFIG_H
) $(RTL_H
) system.h toplev.h
1629 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-extract.c
1631 insn-extract.c
: s-extract
; @true
1632 s-extract
: $(md_file
) genextract
$(srcdir)/move-if-change
1633 .
/genextract
$(md_file
) > tmp-extract.c
1634 $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1637 insn-peep.o
: insn-peep.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) output.h real.h system.h
1638 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-peep.c
1640 insn-peep.c
: s-peep
; @true
1641 s-peep
: $(md_file
) genpeep
$(srcdir)/move-if-change
1642 .
/genpeep
$(md_file
) > tmp-peep.c
1643 $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1646 insn-attrtab.o
: insn-attrtab.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h \
1647 output.h insn-attr.h insn-config.h system.h toplev.h
1648 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-attrtab.c
1650 insn-attr.h
: s-attr
; @true
1651 s-attr
: $(md_file
) genattr
$(srcdir)/move-if-change
1652 .
/genattr
$(md_file
) > tmp-attr.h
1653 $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1656 insn-attrtab.c
: s-attrtab
; @true
1657 s-attrtab
: $(md_file
) genattrtab
$(srcdir)/move-if-change
1658 if cmp
-s
$(PREMADE_ATTRTAB_MD
) $(md_file
); \
1660 echo Using
$(PREMADE_ATTRTAB
); \
1661 cp
$(PREMADE_ATTRTAB
) tmp-attrtab.c
; \
1663 .
/genattrtab
$(md_file
) > tmp-attrtab.c
; \
1665 $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1668 insn-output.o
: insn-output.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h conditions.h \
1669 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h
$(RECOG_H
) \
1670 insn-codes.h system.h
1671 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-output.c
1673 insn-output.c
: s-output
; @true
1674 s-output
: $(md_file
) genoutput
$(srcdir)/move-if-change
1675 .
/genoutput
$(md_file
) > tmp-output.c
1676 $(srcdir)/move-if-change tmp-output.c insn-output.c
1679 genrtl.o
: genrtl.c
$(CONFIG_H
) $(RTL_H
) system.h
1680 genrtl.c genrtl.h
: s-genrtl
1681 @true
# force gnu make to recheck modification times.
1683 s-genrtl
: gengenrtl
$(srcdir)/move-if-change
$(RTL_BASE_H
)
1684 .
/gengenrtl tmp-genrtl.h tmp-genrtl.c
1685 $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
1686 $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
1690 # Compile the programs that generate insn-* from the machine description.
1691 # They are compiled with $(HOST_CC), and associated libraries,
1692 # since they need to run on this machine
1693 # even if GCC is being compiled to run on some other machine.
1695 # $(CONFIG_H) is omitted from the deps of the gen*.o
1696 # because these programs don't really depend on anything
1697 # about the target machine. They do depend on config.h itself,
1698 # since that describes the host machine.
1700 # Pass the md file through cpp if the target requests it.
1701 $(MD_FILE
): $(MD_DEPS
)
1703 $(MD_CPP
) $(MD_CPPFLAGS
) $(md_file
) | sed
's/^# /; /g' > tmp-
$@
1706 genconfig
: genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1707 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1708 genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1710 genconfig.o
: genconfig.c
$(RTL_H
) $(build_xm_file
) system.h
1711 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genconfig.c
1713 genflags
: genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1714 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1715 genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1717 genflags.o
: genflags.c
$(RTL_H
) $(build_xm_file
) system.h
1718 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genflags.c
1720 gencodes
: gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1721 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1722 gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1724 gencodes.o
: gencodes.c
$(RTL_H
) $(build_xm_file
) system.h
1725 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencodes.c
1727 genemit
: genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1728 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1729 genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1731 genemit.o
: genemit.c
$(RTL_H
) $(build_xm_file
) system.h
1732 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genemit.c
1734 genopinit
: genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1735 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1736 genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1738 genopinit.o
: genopinit.c
$(RTL_H
) $(build_xm_file
) system.h
1739 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genopinit.c
1741 genrecog
: genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1742 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1743 genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1745 genrecog.o
: genrecog.c
$(RTL_H
) $(build_xm_file
) system.h
1746 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genrecog.c
1748 genextract
: genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1749 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1750 genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1752 genextract.o
: genextract.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h
1753 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genextract.c
1755 genpeep
: genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1756 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1757 genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1759 genpeep.o
: genpeep.c
$(RTL_H
) $(build_xm_file
) system.h
1760 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genpeep.c
1762 genattr
: genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1763 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1764 genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1766 genattr.o
: genattr.c
$(RTL_H
) $(build_xm_file
) system.h
1767 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattr.c
1769 genattrtab
: genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBDEPS
)
1770 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1771 genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBS
)
1773 genattrtab.o
: genattrtab.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h
1774 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattrtab.c
1776 genoutput
: genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1777 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1778 genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1780 genoutput.o
: genoutput.c
$(RTL_H
) $(build_xm_file
) system.h
1781 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genoutput.c
1783 gengenrtl
: gengenrtl.o
$(HOST_LIBDEPS
)
1784 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1785 gengenrtl.o
$(HOST_LIBS
)
1787 gengenrtl.o
: gengenrtl.c
$(RTL_BASE_H
) system.h
1788 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gengenrtl.c
1791 # Compile the libraries to be used by gen*.
1792 # If we are not cross-building, gen* use the same .o's that cc1 will use,
1793 # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1794 # with the rules for rtl.o, alloca.o, etc.
1795 $(HOST_PREFIX_1
)rtl.o
: $(srcdir)/rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1796 rm -f
$(HOST_PREFIX
)rtl.c
1797 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtl.c
> $(HOST_PREFIX
)rtl.c
1798 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtl.c
1800 $(HOST_PREFIX_1
)print-rtl.o
: $(srcdir)/print-rtl.c
$(CONFIG_H
) $(RTL_H
)
1801 rm -f
$(HOST_PREFIX
)print-rtl.c
1802 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c
> $(HOST_PREFIX
)print-rtl.c
1803 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)print-rtl.c
1805 $(HOST_PREFIX_1
)bitmap.o
: $(srcdir)/bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1806 flags.h
$(BASIC_BLOCK_H
) $(REGS_H
)
1807 rm -f
$(HOST_PREFIX
)bitmap.c
1808 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c
> $(HOST_PREFIX
)bitmap.c
1809 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)bitmap.c
1811 $(HOST_PREFIX_1
)rtlanal.o
: $(srcdir)/rtlanal.c
$(CONFIG_H
) $(RTL_H
)
1812 rm -f
$(HOST_PREFIX
)rtlanal.c
1813 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c
> $(HOST_PREFIX
)rtlanal.c
1814 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtlanal.c
1816 $(HOST_PREFIX_1
)alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1817 rm -f
$(HOST_PREFIX
)alloca.c
1818 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c
$(HOST_PREFIX
)alloca.c
1819 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)alloca.c
1821 $(HOST_PREFIX_1
)obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
1822 rm -f
$(HOST_PREFIX
)obstack.c
1823 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/obstack.c
> $(HOST_PREFIX
)obstack.c
1824 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)obstack.c
1826 $(HOST_PREFIX_1
)vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
1827 rm -f
$(HOST_PREFIX
)vfprintf.c
1828 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/vfprintf.c
> $(HOST_PREFIX
)vfprintf.c
1829 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)vfprintf.c
1831 $(HOST_PREFIX_1
)doprint.o
: doprint.c
1832 rm -f
$(HOST_PREFIX
)doprint.c
1833 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/doprint.c
> $(HOST_PREFIX
)doprint.c
1834 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)doprint.c
1836 $(HOST_PREFIX_1
)malloc.o
: malloc.c
1837 rm -f
$(HOST_PREFIX
)malloc.c
1838 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/malloc.c
> $(HOST_PREFIX
)malloc.c
1839 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)malloc.c
1841 # This satisfies the dependency that we get if you cross-compile a compiler
1842 # that does not need to compile alloca, malloc or whatever.
1844 touch
$(HOST_PREFIX_1
)
1847 # Remake cpp and protoize.
1849 # Making the preprocessor
1850 cpp$(exeext
): $(CCCP
)$(exeext
)
1852 $(LN
) $(CCCP
)$(exeext
) cpp$(exeext
)
1853 cccp
$(exeext
): cccp.o cexp.o version.o
prefix.o mbchar.o @extra_cpp_objs@
$(LIBDEPS
)
1854 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ cccp.o cexp.o
prefix.o mbchar.o \
1855 version.o @extra_cpp_objs@
$(LIBS
)
1856 cexp.o
: $(srcdir)/cexp.c
$(CONFIG_H
) system.h gansidecl.h
1857 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/cexp.c
1858 $(srcdir)/cexp.c
: $(srcdir)/cexp.y
1859 cd
$(srcdir); $(BISON
) -o cexp.c cexp.y
1861 # We use $(libsubdir)/$(unlibsubdir) to match the
1862 # -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
1863 cccp.o
: cccp.c
$(CONFIG_H
) pcp.h version.c config.status system.h gansidecl.h \
1865 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1866 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1867 -DGPLUSPLUS_INCLUDE_DIR
=\"$(libsubdir
)/$(unlibsubdir
)/..
`echo $(exec_prefix) | sed -e 's|^$(prefix)||' -e 's|/[^/]*|/..|g'`/include/g
++\" \
1868 -DLOCAL_INCLUDE_DIR
=\"$(libsubdir
)/$(unlibsubdir
)/..
`echo $(exec_prefix) | sed -e 's|^$(prefix)||' -e 's|/[^/]*|/..|g'`/include\" \
1869 -DCROSS_INCLUDE_DIR
=\"$(libsubdir
)/$(unlibsubdir
)/..
/$(target_alias
)/sys-include
\" \
1870 -DTOOL_INCLUDE_DIR
=\"$(libsubdir
)/$(unlibsubdir
)/..
/$(target_alias
)/include\" \
1871 -c
`echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1873 cppmain
$(exeext
): cppmain.o cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o \
1874 prefix.o version.o mbchar.o @extra_cpp_objs@
$(LIBDEPS
)
1875 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ cppmain.o cpplib.o cpphash.o \
1876 mbchar.o @extra_cpp_objs@ \
1877 cppalloc.o cpperror.o cppexp.o
prefix.o version.o
$(LIBS
)
1879 cppmain.o
: cppmain.c
$(CONFIG_H
) cpplib.h system.h gansidecl.h
1881 cpplib.o
: cpplib.c
$(CONFIG_H
) cpplib.h cpphash.h config.status system.h \
1883 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1884 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1885 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
1886 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1887 -DCROSS_INCLUDE_DIR
=\"$(tooldir
)/sys-include
\" \
1888 -DTOOL_INCLUDE_DIR
=\"$(tooldir
)/include\" \
1889 -c
`echo $(srcdir)/cpplib.c | sed 's,^\./,,'`
1891 cpperror.o
: cpperror.c
$(CONFIG_H
) cpplib.h system.h gansidecl.h
1893 cppexp.o
: cppexp.c
$(CONFIG_H
) cpplib.h system.h gansidecl.h
1895 cpphash.o
: cpphash.c cpplib.h cpphash.h
$(CONFIG_H
) system.h gansidecl.h
1897 cppalloc.o
: cppalloc.c
$(CONFIG_H
) cpplib.h system.h gansidecl.h
1899 # Note for the stamp targets, we run the program `true' instead of
1900 # having an empty command (nothing following the semicolon).
1902 proto
: config.status protoize
$(exeext
) unprotoize
$(exeext
) SYSCALLS.c.X
1904 protoize
$(exeext
): protoize.o getopt.o getopt1.o getpwd.o version.o \
1905 pexecute.o choose-temp.o mkstemp.o
$(LIBDEPS
)
1906 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ \
1907 protoize.o getopt.o getopt1.o getpwd.o version.o \
1908 pexecute.o choose-temp.o mkstemp.o
$(LIBS
)
1910 unprotoize
$(exeext
): unprotoize.o getopt.o getopt1.o getpwd.o version.o \
1911 pexecute.o choose-temp.o mkstemp.o
$(LIBDEPS
)
1912 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ \
1913 unprotoize.o getopt.o getopt1.o getpwd.o version.o \
1914 pexecute.o choose-temp.o mkstemp.o
$(LIBS
)
1916 protoize.o
: protoize.c
$(srcdir)/..
/include/getopt.h
$(CONFIG_H
) system.h
1917 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1918 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1919 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
1920 -DCROSS_INCLUDE_DIR
=\"$(libsubdir
)/$(unlibsubdir
)/..
/$(target_alias
)/sys-include
\" \
1921 -DTOOL_INCLUDE_DIR
=\"$(tooldir
)/include\" \
1922 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1923 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
1924 $(srcdir)/protoize.c
1926 unprotoize.o
: unprotoize.c protoize.c
$(srcdir)/..
/include/getopt.h
$(CONFIG_H
) system.h
1927 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1928 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1929 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
1930 -DCROSS_INCLUDE_DIR
=\"$(libsubdir
)/$(unlibsubdir
)/..
/$(target_alias
)/sys-include
\" \
1931 -DTOOL_INCLUDE_DIR
=\"$(tooldir
)/include\" \
1932 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1933 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
1934 $(srcdir)/unprotoize.c
1936 getopt.o
: $(srcdir)/..
/libiberty
/getopt.c
$(srcdir)/..
/include/getopt.h
1938 $(LN_S
) $(srcdir)/..
/libiberty
/getopt.c getopt.c
1939 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) getopt.c
1941 getopt1.o
: $(srcdir)/..
/libiberty
/getopt1.c
$(srcdir)/..
/include/getopt.h
1943 $(LN_S
) $(srcdir)/..
/libiberty
/getopt1.c getopt1.c
1944 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) getopt1.c
1946 # This info describes the target machine, so compile with GCC just built.
1947 SYSCALLS.c.X
: $(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
$(GCC_PASSES
) \
1949 -rm -f SYSCALLS.c tmp-SYSCALLS.s
1950 cat
$(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
> SYSCALLS.c
1951 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1952 -aux-info
$@
-S
-o tmp-SYSCALLS.s SYSCALLS.c
1953 -rm -f SYSCALLS.c tmp-SYSCALLS.s
1956 test-protoize-simple
: .
/protoize .
/unprotoize
$(GCC_PASSES
)
1957 -rm -f tmp-proto.
[cso
]
1958 cp
$(srcdir)/protoize.c tmp-proto.c
1959 chmod u
+w tmp-proto.c
1960 .
/protoize
-N
-B .
/ -x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
1961 $(CFLAGS) $(INCLUDES) \
1962 -DGCC_INCLUDE_DIR=0 \
1963 -DGPLUSPLUS_INCLUDE_DIR=0 \
1964 -DCROSS_INCLUDE_DIR=0 \
1965 -DTOOL_INCLUDE_DIR=0 \
1966 -DSTD_PROTO_DIR=0" tmp-proto.c
1967 @echo
'**********' Expect
400 lines of differences.
1968 -diff
$(srcdir)/protoize.c tmp-proto.c
> tmp-proto.diff
1969 -wc
-l tmp-proto.diff
1970 .
/unprotoize
-N
-x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
1971 $(CFLAGS) $(INCLUDES) \
1972 -DGCC_INCLUDE_DIR=0 \
1973 -DGPLUSPLUS_INCLUDE_DIR=0 \
1974 -DCROSS_INCLUDE_DIR=0 \
1975 -DTOOL_INCLUDE_DIR=0 \
1976 -DSTD_PROTO_DIR=0" tmp-proto.c
1977 @echo Expect zero differences.
1978 diff
$(srcdir)/protoize.c tmp-proto.c | cat
1979 -rm -f tmp-proto.
[cs
] tmp-proto
$(objext
)
1981 gcov.o
: gcov.c gcov-io.h system.h
1983 # Only one of 'gcov' or 'gcov.exe' is actually built, depending
1984 # upon whether $(exeext) is empty or not.
1985 gcov
$(exeext
): gcov.o
$(LIBDEPS
)
1986 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) gcov.o
$(LIBS
) -o
$@
1988 # Build the include directory. The stamp files are stmp-* rather than
1989 # s-* so that mostlyclean does not force the include directory to
1992 # Build the include directory including float.h (which no longer depends upon
1994 stmp-int-hdrs
: stmp-fixinc
$(USER_H
) xlimits.h gfloat.h
1995 # Copy in the headers provided with gcc.
1996 # The sed command gets just the last file name component;
1997 # this is necessary because VPATH could add a dirname.
1998 # Using basename would be simpler, but some systems don't have it.
1999 # The touch command is here to workaround an AIX/Linux NFS bug.
2000 for file in ..
$(USER_H
); do \
2001 if
[ X
$$file != X..
]; then \
2002 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2003 touch
include/$$realfile; \
2004 rm -f
include/$$realfile; \
2005 cp
$$file include; \
2006 chmod a
+r
include/$$realfile; \
2009 rm -f
include/limits.h
2010 cp xlimits.h
include/limits.h
2011 chmod a
+r
include/limits.h
2012 rm -f
include/float.h
2013 if
[ -s gfloat.h
]; then \
2014 cp gfloat.h
include/float.h
&& \
2015 chmod a
+r
include/float.h
; \
2017 # Install the README
2018 rm -f
include/README
2019 cp
$(srcdir)/README-fixinc
include/README
2020 chmod a
+r
include/README
2023 # Now that gfloat.h no longer depends upon enquire, this is actually a no-op.
2028 DEST
=`cd $(srcdir) ; pwd`/$@ CC
=$(CC
) MAKE
=$(MAKE
) CFLAGS
="$(CFLAGS)" \
2029 export DEST CC MAKE CFLAGS
; \
2030 echo DEST
=$$DEST CC
=$$CC MAKE
=$$MAKE CFLAGS
=$$CFLAGS ; \
2031 cd ..
/contrib
/fixinc
; \
2032 $(SHELL
) mkfixinc.sh
$(target
) $$DEST
2034 # Build fixed copies of system files.
2035 stmp-fixinc
: $(FIXINCLUDES
) gsyslimits.h
2038 if
[ x
$(FIXINCLUDES
) != xMakefile.in
]; \
2040 for
dir in
$(SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
); do \
2043 $(SHELL
) $(srcdir)/$(FIXINCLUDES
) include $$dir; \
2046 rm -f
include/assert.h
; \
2047 cp
$(srcdir)/assert.h
include/assert.h
; \
2048 chmod a
+r
include/assert.h
; \
2051 rm -f
include/syslimits.h
2052 if
[ -f
include/limits.h
]; then \
2053 mv
include/limits.h
include/syslimits.h
; \
2055 cp
$(srcdir)/gsyslimits.h
include/syslimits.h
; \
2057 chmod a
+r
include/syslimits.h
2058 # If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and
2059 # that directory exists, then make sure that $(libsubdir) exists.
2060 # This is because cpp is compiled to find $(tooldir)/include via
2061 # $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
2063 if
[ "$(SYSTEM_HEADER_DIR)" = "$(tooldir)/sys-include" ] \
2064 && [ -d
$(tooldir
)/sys-include
]; then \
2065 if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; fi
; \
2066 if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; fi
; \
2067 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
) ; fi
; \
2068 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; fi
; \
2073 # Files related to the fixproto script.
2075 deduced.h
: $(GCC_PASSES
) $(srcdir)/scan-types.sh stmp-int-hdrs
2076 if
[ -d
$(SYSTEM_HEADER_DIR
) ]; \
2078 CC
="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
2080 $(SHELL
) $(srcdir)/scan-types.sh
"$(srcdir)" >tmp-deduced.h
; \
2081 mv tmp-deduced.h deduced.h
; \
2086 gen-protos
: gen-protos.o scan.o cppalloc.o
$(HOST_LIBDEPS
)
2087 ${HOST_CC} $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
2088 gen-protos.o scan.o cppalloc.o
$(HOST_LIBS
)
2090 gen-protos.o
: gen-protos.c scan.h
$(build_xm_file
) system.h
2091 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gen-protos.c
2093 scan.o
: scan.c scan.h
$(build_xm_file
) system.h
2094 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan.c
2096 xsys-protos.h
: $(GCC_PASSES
) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
2097 cat deduced.h
$(srcdir)/sys-protos.h
> tmp-fixtmp.c
2098 mv tmp-fixtmp.c fixtmp.c
2099 $(GCC_FOR_TARGET
) fixtmp.c
-w
-U__SIZE_TYPE__
-U__PTRDIFF_TYPE__
-U__WCHAR_TYPE__
-E \
2100 | sed
-e
's/ / /g' -e
's/ *(/ (/g' -e
's/ [ ]*/ /g' -e
's/( )/()/' \
2101 | .
/gen-protos
>xsys-protos.hT
2102 mv xsys-protos.hT xsys-protos.h
2105 fix-header
: fix-header.o scan-decls.o scan.o xsys-protos.h
$(HOST_LIBDEPS
) \
2106 cpplib.o cpphash.o cppalloc.o cppexp.o
prefix.o version.o
2107 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ fix-header.o \
2108 scan-decls.o scan.o cpplib.o cpphash.o cppalloc.o
prefix.o \
2109 version.o cppexp.o
$(HOST_LIBS
)
2111 fix-header.o
: fix-header.c
$(srcdir)/..
/include/obstack.h scan.h \
2112 xsys-protos.h
$(build_xm_file
) system.h cpplib.h cpphash.h
2113 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/fix-header.c
2115 scan-decls.o
: scan-decls.c scan.h cpplib.h
$(build_xm_file
) system.h gansidecl.h
2116 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan-decls.c
2118 # stmp-fixproto depends on this, not on fix-header directly.
2119 # The idea is to make sure fix-header gets built,
2120 # but not rerun fixproto after each stage
2121 # just because fix-header's mtime has changed.
2122 fixhdr.ready
: fix-header
2123 -if
[ -f fixhdr.ready
] ; then \
2126 touch fixhdr.ready
; \
2129 # stmp-headers is to make sure fixincludes has already finished.
2130 # The if statement is so that we don't run fixproto a second time
2131 # if it has already been run on the files in `include'.
2132 stmp-fixproto
: fixhdr.ready fixproto stmp-headers
2133 @echo
"Various warnings and error messages from fixproto are normal"
2134 -if
[ -d
include ] ; then true
; else mkdir
include; fi
2135 -if
[ -f
include/fixed
] ; then true
; \
2137 : This line works around a
'make' bug in BSDI
1.1.
; \
2138 FIXPROTO_DEFINES
="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES
; \
2139 if
[ -d
$(SYSTEM_HEADER_DIR
) ] ; then \
2140 $(SHELL
) ${srcdir}/fixproto
include include $(SYSTEM_HEADER_DIR
); \
2142 touch
include/fixed
; \
2146 # Remake the info files.
2149 info: cpp.
info gcc.
info lang.
info
2151 cpp.
info: $(srcdir)/cpp.texi
2152 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o
cpp.
info $(srcdir)/cpp.texi
2154 gcc.
info: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2155 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2156 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2157 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o gcc.
info $(srcdir)/gcc.texi
2159 dvi: gcc.
dvi cpp.
dvi lang.
dvi
2161 # This works with GNU Make's default rule.
2162 gcc.
dvi: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2163 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2164 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2165 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2167 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2169 cpp.
dvi: $(srcdir)/cpp.texi
2170 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2172 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2175 INSTALL
: $(srcdir)/install1.texi
$(srcdir)/install.texi
2176 cd
$(srcdir); $(MAKEINFO
) -D INSTALLONLY \
2177 --no-split
-o INSTALL install1.texi
2179 # Deletion of files made during compilation.
2180 # There are four levels of this:
2181 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2182 # `mostlyclean' is useful while working on a particular type of machine.
2183 # It deletes most, but not all, of the files made by compilation.
2184 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2185 # `clean' deletes everything made by running `make all'.
2186 # `distclean' also deletes the files made by config.
2187 # `maintainer-clean' also deletes everything that could be regenerated
2188 # automatically, except for `configure'.
2189 # We remove as much from the language subdirectories as we can
2190 # (less duplicated code).
2193 mostlyclean: lang.
mostlyclean
2194 -rm -f
$(STAGESTUFF
)
2195 # Delete the temporary source copies for cross compilation.
2196 -rm -f
$(HOST_PREFIX_1
)rtl.c
$(HOST_PREFIX_1
)rtlanal.c
2197 -rm -f
$(HOST_PREFIX_1
)alloca.c
$(HOST_PREFIX_1
)malloc.c
2198 -rm -f
$(HOST_PREFIX_1
)obstack.c
2199 # Delete the temp files made in the course of building libgcc.a.
2200 -rm -f tmplibgcc
* tmpcopy xlimits.h libgcc1-test
2201 for name in
$(LIB1FUNCS
); do
rm -f
$${name}.c
; done
2202 # Delete other built files.
2203 -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
2204 # Delete the stamp and temporary files.
2205 -rm -f s-
* tmp-
* stamp-
* stmp-
*
2206 -rm -f
*/stamp-
* */tmp-
*
2207 # Delete debugging dump files.
2208 -rm -f
*.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop
2209 -rm -f
*.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.addressof
2210 -rm -f
*.regmove
*.mach
*.bp
*.gcse
2211 -rm -f
*/*.greg
*/*.lreg
*/*.combine
*/*.flow
*/*.cse
*/*.jump
*/*.rtl
2212 -rm -f
*/*.tree
*/*.loop
*/*.dbr
*/*.jump2
*/*.sched
*/*.cse2
2213 -rm -f
*/*.sched2
*/*.stack
*/*.regmove
*/*.gcse
2214 # Delete some files made during installation.
2215 -rm -f specs gfloat.h float.h-
* enquire SYSCALLS.c.X SYSCALLS.c
2216 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2217 # Delete files generated for fixproto
2218 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2219 gen-protos fixproto.list fixtmp.
* fixhdr.ready
2220 # Delete unwanted output files from TeX.
2221 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
2222 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
2223 # Delete sorted indices we don't actually use.
2224 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2225 # Delete core dumps.
2229 # Delete all files made by compilation
2230 # that don't exist in the distribution.
2231 clean: mostlyclean lang.
clean
2232 # It may not be quite desirable to delete unprotoize.c here,
2233 # but the spec for `make clean' requires it.
2234 # Using unprotoize.c is not quite right in the first place,
2235 # but what better way is there?
2236 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2240 -if
[ -f md.pre-cpp
]; then \
2243 # Delete the include directory.
2245 # Delete files used by the "multilib" facility (including libgcc subdirs).
2246 -rm -f multilib.h tmpmultilib
*
2247 -if
[ "x$(MULTILIB_DIRNAMES)" != x
] ; then \
2248 rm -rf
$(MULTILIB_DIRNAMES
); \
2249 else if
[ "x$(MULTILIB_OPTIONS)" != x
] ; then \
2250 rm -rf
`echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2252 -rm -fr stage1 stage2 stage3 stage4
2254 # Delete all files that users would normally create
2255 # while building and installing GCC.
2256 distclean: clean lang.
distclean
2257 -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
2259 -rm -f config.status config.run config.cache config.bak
2260 -rm -f Make-lang Make-hooks Make-host Make-target
2261 -rm -f Makefile specs.h options.h gencheck.h
*.oaux
2262 -rm -f gthr-default.h
2263 -rm -f
*/stage1
*/stage2
*/stage3
*/stage4
*/include
2264 -rm -f c-parse.output
2267 -rm -f site.exp site.bak testsuite
/site.exp testsuite
/site.bak
2268 -rm -f testsuite
/{gcc
,g
++}.
{log
,sum
}
2270 # Delete anything likely to be found in the source directory
2271 # that shouldn't be in the distribution.
2272 extraclean
: distclean lang.extraclean
2273 -rm -rf
=* .
/"#"* *~
* config
/=* config
/"#"* config
/*~
*
2274 -rm -f patch
* *.orig
*.rej config
/patch
* config
/*.orig config
/*.rej
2275 -rm -f config
/*/=* config
/*/"#"* config
/*/*~
*
2276 -rm -f config
/*/*.orig config
/*/*.rej
2277 -rm -f
*.
dvi *.ps
*.oaux
*.d
*.
[zZ
] *.gz
2278 -rm -f
*.
tar *.xtar
*diff
*.diff.
* *.
tar.
* *.xtar.
* *diffs
2279 -rm -f
*lose config
/*lose config
/*/*lose
2280 -rm -f
*.s
*.s
[0-9] *.i config
/ChangeLog
2281 -rm -f
*/=* */"#"* */*~
*
2282 -rm -f
*/patch
* */*.orig
*/*.rej
2283 -rm -f
*/*.
dvi */*.oaux
*/*.d
*/*.
[zZ
] */*.gz
2284 -rm -f
*/*.
tar */*.xtar
*/*diff
*/*.diff.
* */*.
tar.
* */*.xtar.
* */*diffs
2285 -rm -f
*/*lose
*/*.s
*/*.s
[0-9] */*.i
2287 # Get rid of every file that's generated from some other file, except for `configure'.
2288 # Most of these files ARE PRESENT in the GCC distribution.
2290 @echo
'This command is intended for maintainers to use; it'
2291 @echo
'deletes files that may need special tools to rebuild.'
2292 $(MAKE
) distclean lang.maintainer-clean
2293 -rm -f c-parse.y c-gperf.h
2294 -rm -f c-parse.c c-parse.h c-parse.output
2295 -rm -f cexp.c cexp.output TAGS
2296 -rm -f
cpp.
info* cpp.??s
cpp.
*aux
2297 -rm -f gcc.
info* gcc.??s gcc.
*aux
2299 # Entry points `install' and `uninstall'.
2300 # Also use `install-collect2' to install collect2 when the config files don't.
2302 # The semicolon is to prevent the install.sh -> install default rule
2303 # from doing anything. Having it run true helps avoid problems and
2304 # noise from versions of make which don't like to have null commands.
2305 install: $(INSTALL_TARGET
) ; @true
2307 # Copy the compiler files into directories where they will be run.
2308 # Install the driver last so that the window when things are
2310 install-normal
: install-common
$(INSTALL_HEADERS
) $(INSTALL_LIBGCC
) \
2311 install-man install-info lang.install-normal install-driver
2313 # Do nothing while making gcc with a cross-compiler. The person who
2314 # makes gcc for the target machine has to know how to put a complete
2315 # gcc together by hand.
2316 install-build
: force
2317 @echo You have to
install gcc on your target machine by hand.
2319 # Run this on the target machine
2320 # to finish installation of cross compiler.
2321 install-cross-rest
: install-float-h-cross
2323 # Install float.h for cross compiler.
2324 # Run this on the target machine!
2325 install-float-h-cross
: installdirs
2326 # if [ -f enquire ] ; then true; else false; fi
2327 # Note: don't use -. We should fail right away if enquire was not made.
2328 .
/enquire
-f
> $(tmpdir
)/float.h
2329 -rm -f
$(libsubdir
)/include/float.h
2330 $(INSTALL_DATA
) $(tmpdir
)/float.h
$(libsubdir
)/include/float.h
2331 -rm -f
$(tmpdir
)/float.h
2332 chmod a-x
$(libsubdir
)/include/float.h
2334 # Create the installation directories.
2336 -if
[ -d
$(prefix) ] ; then true
; else mkdir
$(prefix) ; chmod a
+rx
$(prefix) ; fi
2337 -if
[ -d
$(exec_prefix) ] ; then true
; else mkdir
$(exec_prefix) ; chmod a
+rx
$(exec_prefix) ; fi
2338 -if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; chmod a
+rx
$(libdir) ; fi
2339 -if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; chmod a
+rx
$(libdir)/gcc-lib
; fi
2340 # This dir isn't currently searched by cpp.
2341 # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2342 -fdir
= ; for
dir in
`echo $(libsubdir) | tr '/' ' '`; do \
2343 fdir
=$${fdir}/$${dir}; \
2344 if
[ -d
$${fdir} ] ; then true
; else mkdir
$${fdir}; chmod a
+rx
$${fdir}; fi
; \
2346 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; chmod a
+rx
$(bindir) ; fi
2347 -if
[ -d
$(includedir) ] ; then true
; else mkdir
$(includedir) ; chmod a
+rx
$(includedir) ; fi
2348 -if
[ -d
$(tooldir
) ] ; then true
; else mkdir
$(tooldir
) ; chmod a
+rx
$(tooldir
) ; fi
2349 -if
[ -d
$(assertdir
) ] ; then true
; else mkdir
$(assertdir
) ; chmod a
+rx
$(assertdir
) ; fi
2350 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; chmod a
+rx
$(infodir) ; fi
2351 # We don't use mkdir -p to create the parents of mandir,
2352 # because some systems don't support it.
2353 # Instead, we use this technique to create the immediate parent of mandir.
2354 -parent
=`echo $(mandir)|sed -e 's@/[^/]*$$@@'`; \
2355 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; chmod a
+rx
$$parent ; fi
2356 -if
[ -d
$(mandir) ] ; then true
; else mkdir
$(mandir) ; chmod a
+rx
$(mandir) ; fi
2358 # Install the compiler executables built during cross compilation.
2359 install-common
: native
installdirs $(EXTRA_PARTS
) lang.install-common
2360 for file in
$(COMPILERS
); do \
2361 if
[ -f
$$file ] ; then \
2362 rm -f
$(libsubdir
)/$$file; \
2363 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2367 for file in
$(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) ..
; do \
2368 if
[ x
"$$file" != x..
]; then \
2369 rm -f
$(libsubdir
)/$$file; \
2370 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2373 for file in
$(EXTRA_PARTS
) ..
; do \
2374 if
[ x
"$$file" != x..
]; then \
2375 rm -f
$(libsubdir
)/$$file; \
2376 $(INSTALL_DATA
) $$file $(libsubdir
)/$$file; \
2377 chmod a-x
$(libsubdir
)/$$file; \
2380 # Don't mess with specs if it doesn't exist yet.
2381 -if
[ -f specs
] ; then \
2382 rm -f
$(libsubdir
)/specs
; \
2383 $(INSTALL_DATA
) specs
$(libsubdir
)/specs
; \
2384 chmod a-x
$(libsubdir
)/specs
; \
2386 # Install protoize if it was compiled.
2387 -if
[ -f protoize
$(exeext
) ]; \
2389 if
[ -f gcc-cross
$(exeext
) ] ; then \
2390 rm -f
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2391 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2392 rm -f
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2393 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2395 rm -f
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2396 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2397 rm -f
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2398 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2400 rm -f
$(libsubdir
)/SYSCALLS.c.X
; \
2401 $(INSTALL_DATA
) SYSCALLS.c.X
$(libsubdir
)/SYSCALLS.c.X
; \
2402 chmod a-x
$(libsubdir
)/SYSCALLS.c.X
; \
2404 -rm -f
$(libsubdir
)/cpp$(exeext
)
2405 $(INSTALL_PROGRAM
) cpp$(exeext
) $(libsubdir
)/cpp$(exeext
)
2406 # Install gcov if it was compiled.
2407 -if
[ -f gcov
$(exeext
) ]; \
2409 rm -f
$(bindir)/gcov
$(exeext
); \
2410 $(INSTALL_PROGRAM
) gcov
$(exeext
) $(bindir)/gcov
$(exeext
); \
2411 chmod a
+x
$(bindir)/gcov
$(exeext
); \
2414 # Install the driver program as $(target_alias)-gcc
2415 # and also as either gcc (if native) or $(tooldir)/bin/gcc.
2416 install-driver
: xgcc
$(exeext
)
2417 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2418 rm -f
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2419 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2420 if
[ -d
$(tooldir
)/bin
/.
] ; then \
2421 rm -f
$(tooldir
)/bin
/gcc
$(exeext
); \
2422 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(tooldir
)/bin
/gcc
$(exeext
); \
2425 rm -f
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2426 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2427 rm -f
$(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2428 $(LN
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2429 mv
$(bindir)/$(target_alias
)-gcc-1
$(exeext
) $(bindir)/$(target_alias
)-gcc
$(exeext
); \
2432 # Install the info files.
2433 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2434 # to do the install.
2435 install-info
: doc
installdirs lang.install-info
2436 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2437 for f in
cpp.
info* gcc.
info*; do \
2438 $(INSTALL_DATA
) $$f $(infodir)/$$f; \
2440 -if
$(SHELL
) -c
'install-info --version' >/dev
/null
2>&1; then \
2441 if
[ -f
$(infodir)/dir ] ; then \
2442 for f in
cpp.
info gcc.
info; do \
2443 install-info
--dir-file
=$(infodir)/dir $(infodir)/$$f; \
2447 -chmod a-x
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2449 # Install the man pages.
2450 install-man
: installdirs $(srcdir)/gcc
.1 $(srcdir)/cccp
.1 lang.install-man
2451 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2452 rm -f
$(mandir)/$(GCC_CROSS_NAME
)$(manext); \
2453 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(mandir)/$(GCC_CROSS_NAME
)$(manext); \
2454 chmod a-x
$(mandir)/$(GCC_CROSS_NAME
)$(manext); \
2456 rm -f
$(mandir)/$(GCC_INSTALL_NAME
)$(manext); \
2457 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(mandir)/$(GCC_INSTALL_NAME
)$(manext); \
2458 chmod a-x
$(mandir)/$(GCC_INSTALL_NAME
)$(manext); \
2460 -rm -f
$(mandir)/cccp
$(manext)
2461 -$(INSTALL_DATA
) $(srcdir)/cccp
.1 $(mandir)/cccp
$(manext)
2462 -chmod a-x
$(mandir)/cccp
$(manext)
2464 # Install the library.
2465 install-libgcc
: libgcc.a
installdirs
2466 -if
[ -f libgcc.a
] ; then \
2467 rm -f
$(libsubdir
)/libgcc.a
; \
2468 $(INSTALL_DATA
) libgcc.a
$(libsubdir
)/libgcc.a
; \
2469 if
$(RANLIB_TEST
) ; then \
2470 (cd
$(libsubdir
); $(RANLIB
) libgcc.a
); else true
; fi
; \
2471 chmod a-x
$(libsubdir
)/libgcc.a
; \
2474 # Install multiple versions of libgcc.a.
2475 install-multilib
: stmp-multilib
installdirs
2476 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
2477 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2478 if
[ -d
$(libsubdir
)/$${dir} ]; then true
; else mkdir
$(libsubdir
)/$${dir}; fi
; \
2479 for f in libgcc.a
$(EXTRA_MULTILIB_PARTS
); do \
2480 rm -f
$(libsubdir
)/$${dir}/$${f}; \
2481 $(INSTALL_DATA
) $${dir}/$${f} $(libsubdir
)/$${dir}/$${f}; \
2483 if
$(RANLIB_TEST
); then \
2484 (cd
$(libsubdir
)/$${dir}; $(RANLIB
) libgcc.a
); else true
; fi
; \
2485 chmod a-x
$(libsubdir
)/$${dir}/libgcc.a
; \
2488 # Install all the header files built in the include subdirectory.
2489 install-headers
: install-include-dir
$(INSTALL_HEADERS_DIR
) $(INSTALL_ASSERT_H
)
2490 # Fix symlinks to absolute paths in the installed include directory to
2491 # point to the installed directory, not the build directory.
2492 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
2493 -files
=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2494 if
[ $$?
-eq
0 ]; then \
2495 dir=`cd include; pwd`; \
2496 for i in
$$files; do \
2497 dest
=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2498 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
2499 rm -f
$(libsubdir
)/include/$$i; \
2500 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir
)/include/$$i; \
2505 # Create or recreate the gcc private include file directory.
2506 install-include-dir
: installdirs
2507 -rm -rf
$(libsubdir
)/include
2508 mkdir
$(libsubdir
)/include
2509 -chmod a
+rx
$(libsubdir
)/include
2511 # Install the include directory using tar.
2512 install-headers-tar
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2514 tar -cf
- .
; exit
0) |
(cd
$(libsubdir
)/include; tar $(TAROUTOPTS
) - )
2515 # /bin/sh on some systems returns the status of the first tar,
2516 # and that can lose with GNU tar which always writes a full block.
2517 # So use `exit 0' to ignore its exit status.
2519 # Install the include directory using cpio.
2520 install-headers-cpio
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2521 (cd
include; find .
-print) |
(cd
include; cpio
-pdum
$(libsubdir
)/include)
2523 # Put assert.h where it won't override GNU libc's assert.h.
2524 # It goes in a dir that is searched after GNU libc's headers;
2525 # thus, the following conditionals are no longer needed.
2526 # But it's not worth deleting them now.
2527 ## Don't replace the assert.h already there if it is not from GCC.
2528 ## This code would be simpler if it tested for -f ... && ! grep ...
2529 ## but supposedly the ! operator is missing in sh on some systems.
2530 install-assert-h
: assert.h
installdirs
2531 if
[ -f
$(assertdir
)/assert.h
]; \
2533 if grep
"__eprintf" $(assertdir
)/assert.h
>/dev
/null
; \
2535 rm -f
$(assertdir
)/assert.h
; \
2536 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2537 chmod a-x
$(assertdir
)/assert.h
; \
2541 rm -f
$(assertdir
)/assert.h
; \
2542 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2543 chmod a-x
$(assertdir
)/assert.h
; \
2546 # Use this target to install the program `collect2' under the name `collect2'.
2547 install-collect2
: collect2
installdirs
2548 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(libsubdir
)/collect2
$(exeext
)
2549 # Install the driver program as $(libsubdir)/gcc for collect2.
2550 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(libsubdir
)/gcc
$(exeext
)
2552 # Cancel installation by deleting the installed files.
2553 uninstall: lang.
uninstall
2554 -rm -rf
$(libsubdir
)
2555 -rm -rf
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
2556 -rm -rf
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
)
2557 -rm -rf
$(bindir)/protoize
$(exeext
)
2558 -rm -rf
$(bindir)/unprotoize
$(exeext
)
2559 -rm -rf
$(bindir)/gcov
$(exeext
)
2560 -rm -rf
$(mandir)/$(GCC_INSTALL_NAME
)$(manext)
2561 -rm -rf
$(mandir)/$(GCC_CROSS_NAME
)$(manext)
2562 -rm -rf
$(mandir)/cccp
$(manext)
2563 -rm -rf
$(mandir)/protoize
$(manext)
2564 -rm -rf
$(mandir)/unprotoize
$(manext)
2565 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2567 # These targets are for the dejagnu testsuites. The file site.exp
2568 # contains global variables that all the testsuites will use.
2570 # Set to $(target_alias)/ for cross.
2571 target_subdir
= @target_subdir@
2573 site.exp
: .
/config.status Makefile
2574 @echo
"Making a new config file..."
2577 -@mv site.exp site.bak
2578 @echo
"## these variables are automatically generated by make ##" > .
/tmp0
2579 @echo
"# Do not edit here. If you wish to override these values" >> .
/tmp0
2580 @echo
"# add them to the last section" >> .
/tmp0
2581 @echo
"set rootme \"`pwd`\"" >> .
/tmp0
2582 @echo
"set srcdir \"`cd ${srcdir}; pwd`\"" >> .
/tmp0
2583 @echo
"set host_triplet $(host_canonical)" >> .
/tmp0
2584 @echo
"set build_triplet $(build_canonical)" >> .
/tmp0
2585 @echo
"set target_triplet $(target)" >> .
/tmp0
2586 @echo
"set target_alias $(target_alias)" >> .
/tmp0
2587 # CFLAGS is set even though it's empty to show we reserve the right to set it.
2588 @echo
"set CFLAGS \"\"" >> .
/tmp0
2589 @echo
"set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> .
/tmp0
2590 # If newlib has been configured, we need to pass -B to gcc so it can find
2591 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
2592 # message if it doesn't, but the testsuite is supposed to ignore the message -
2593 # it's too difficult to tell when to and when not to pass -B (not all targets
2594 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
2595 # seems like too selective a test.
2596 # ??? Another way to solve this might be to rely on linker scripts. Then
2597 # theoretically the -B won't be needed.
2598 # We also need to pass -L ../ld so that the linker can find ldscripts.
2599 @if
[ -d
$(objdir
)/..
/$(target_subdir
)newlib
] ; then \
2600 echo
"set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> .
/tmp0
; \
2601 echo
"set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> .
/tmp0
; \
2602 echo
"append CFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2603 echo
"append CXXFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2604 echo
"append LDFLAGS \" \$$newlib_ldflags\"" >> .
/tmp0
; \
2607 @if
[ -d
$(objdir
)/..
/ld ] ; then \
2608 echo
"append LDFLAGS \" -L$(objdir)/../ld\"" >> .
/tmp0
; \
2611 echo
"set tmpdir $(objdir)/testsuite" >> .
/tmp0
2612 @echo
"set srcdir \"\$${srcdir}/testsuite\"" >> .
/tmp0
2613 @echo
"## All variables above are generated by configure. Do Not Edit ##" >> .
/tmp0
2614 @cat .
/tmp0
> site.exp
2615 @cat site.bak | sed \
2616 -e
'1,/^## All variables above are.*##/ d' >> site.exp
2619 CHECK_TARGETS
= check-gcc check-g
++ check-g77 check-objc
2621 check: $(CHECK_TARGETS
)
2623 testsuite
/site.exp
: site.exp
2624 if
[ -d testsuite
]; then \
2629 rm -rf testsuite
/site.exp
2630 cp site.exp testsuite
/site.exp
2632 check-g
++: testsuite
/site.exp
2633 -rootme
=`pwd`; export rootme
; \
2634 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2636 EXPECT
=${EXPECT} ; export EXPECT
; \
2637 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2638 TCL_LIBRARY
=$${srcdir}/..
/tcl
/library
; \
2639 export TCL_LIBRARY
; fi
; \
2640 $(RUNTEST
) --tool g
++ $(RUNTESTFLAGS
)
2642 check-gcc
: testsuite
/site.exp
2643 -rootme
=`pwd`; export rootme
; \
2644 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2646 EXPECT
=${EXPECT} ; export EXPECT
; \
2647 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2648 TCL_LIBRARY
=$${srcdir}/..
/tcl
/library
; \
2649 export TCL_LIBRARY
; fi
; \
2650 $(RUNTEST
) --tool gcc
$(RUNTESTFLAGS
)
2652 check-g77
: testsuite
/site.exp
2653 -rootme
=`pwd`; export rootme
; \
2654 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2656 EXPECT
=${EXPECT} ; export EXPECT
; \
2657 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2658 TCL_LIBRARY
=$${srcdir}/..
/tcl
/library
; \
2659 export TCL_LIBRARY
; fi
; \
2660 $(RUNTEST
) --tool g77
$(RUNTESTFLAGS
)
2662 check-objc
: testsuite
/site.exp
2663 -rootme
=`pwd`; export rootme
; \
2664 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2666 EXPECT
=${EXPECT} ; export EXPECT
; \
2667 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2668 TCL_LIBRARY
=$${srcdir}/..
/tcl
/library
; \
2669 export TCL_LIBRARY
; fi
; \
2670 $(RUNTEST
) --tool objc
$(RUNTESTFLAGS
)
2672 # These exist for maintenance purposes.
2674 # Update the tags table.
2678 mv
-f c-parse.
[ch
] cexp.c
=*.
[chy
] tmp-tags
; \
2679 etags
*.y
*.h
*.c
; \
2683 # Create the distribution tar.gz file.
2685 gzip
--best
< tmp-gcc.xtar
> tmp-gcc.xtar.gz
2686 mv tmp-gcc.xtar.gz gcc-
$(version
).
tar.gz
2688 tmp-gcc.xtar
: distdir
2689 # Make the distribution.
2690 tar -chf tmp-gcc.xtar gcc-
$(version
)
2693 if
[ -d
$(srcdir)/CVS
]; then cvs
-r update
; fi
2695 # This target exists to do the initial work before the language specific
2697 distdir-start
: doc
$(srcdir)/INSTALL
$(srcdir)/c-parse.y
$(srcdir)/c-gperf.h \
2698 $(srcdir)/c-parse.c
$(srcdir)/cexp.c
$(srcdir)/config.in \
2699 $(srcdir)/version.c TAGS
2700 @if grep
-s
"for version ${mainversion}" gcc.texi
> /dev
/null
; \
2702 else echo
"You must update the version number in \`gcc.texi'"; sleep
10;\
2704 # Update the version number in README
2705 awk
'$$1 " " $$2 " " $$3 == "This directory contains" \
2706 { $$6 = version; print $$0 } \
2707 $$1 " " $$2 " " $$3 != "This directory contains"' \
2708 version
=$(version
) README
> tmp.README
2709 mv tmp.README README
2710 -rm -rf gcc-
$(version
) tmp
2711 # Put all the files in a temporary subdirectory
2712 # which has the name that we want to have in the tar file.
2716 for file in
*[0-9a-zA-Z
+]; do \
2720 for file in
*[0-9a-zA-Z
+]; do \
2721 if
test -d
$$file && test "$$file" != RCS
&& test "$$file" != CVS
; then \
2722 mkdir ..
/tmp
/config
/$$file; \
2724 for subfile in
*[0-9a-zA-Z
+]; do \
2725 $(LN
) $$subfile ..
/..
/tmp
/config
/$$file; \
2729 $(LN
) $$file ..
/tmp
/config
; \
2733 for file in
*[0-9a-zA-Z
+]; do \
2734 $(LN
) $$file ..
/tmp
/ginclude
; \
2737 for file in
*[0-9a-zA-Z
+]; do \
2738 $(LN
) $$file ..
/tmp
/objc
; \
2742 # Finish making `distdir', after the languages have done their thing.
2744 mv tmp gcc-
$(version
)
2745 # Get rid of everything we don't want in the distribution. We'd want
2746 # this to use Makefile.in, but it doesn't have the `lang.foo' targets
2748 cd gcc-
$(version
); make extraclean VERSION_DEP
=
2750 distdir
: distdir-cvs distdir-start lang.distdir distdir-finish
2752 # make diff oldversion=M.N
2753 # creates a diff file between an older distribution and this one.
2754 # The -P option assumes this is GNU diff.
2756 diff
-rc2P
-x c-parse.y
-x c-parse.c
-x c-parse.h
-x c-gperf.h \
2757 -x cexp.c
-x
-x TAGS
-x INSTALL \
2758 -x configure
-x config.in \
2759 -x
"gcc.??" -x
"gcc.??s" -x gcc.aux
-x
"gcc.info*" \
2760 -x
"cpp.??" -x
"cpp.??s" -x
cpp.aux
-x
"cpp.info*" \
2761 $(LANG_DIFF_EXCLUDES
) \
2762 gcc-
$(oldversion
) gcc-
$(version
) > gcc-
$(oldversion
)-$(version
).diff
2764 bootstrap bootstrap-lean
: force
2765 # Only build the C compiler for stage1, because that is the only one that
2766 # we can guarantee will build with the native compiler, and also it is the
2767 # only thing useful for building stage2.
2768 $(MAKE
) CC
="$(CC)" libdir=$(libdir) LANGUAGES
="$(BOOT_LANGUAGES)"
2770 # This used to define ALLOCA as empty, but that would lead to bad results
2771 # for a subsequent `make install' since that would not have ALLOCA empty.
2772 # To prevent `make install' from compiling alloca.o and then relinking cc1
2773 # because alloca.o is newer, we permit these recursive makes to compile
2774 # alloca.o. Then cc1 is newer, so it won't have to be relinked.
2775 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2777 -if
test $@
= bootstrap-lean
; then
rm -rf stage1
; else true
; fi
2778 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2780 bootstrap2 bootstrap2-lean
: force
2781 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2783 -if
test $@
= bootstrap2-lean
; then
rm -rf stage1
; else true
; fi
2784 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2786 bootstrap3 bootstrap3-lean
: force
2787 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2789 bootstrap4 bootstrap4-lean
: force
2790 $(MAKE
) CC
="stage3/xgcc$(exeext) -Bstage3/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage3
/ LANGUAGES
="$(LANGUAGES)"
2792 # Compare the object files in the current directory with those in the
2795 # ./ avoids bug in some versions of tail.
2796 compare compare3 compare4 compare-lean compare3-lean compare4-lean
: force
2798 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2799 for file in
*$(objext
); do \
2800 tail
+16c .
/$$file > tmp-foo1
; \
2801 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2802 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2804 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2805 for
dir in tmp-foo
$(SUBDIRS
); do \
2806 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2807 for file in
$$dir/*$(objext
); do \
2808 tail
+16c .
/$$file > tmp-foo1
; \
2809 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2810 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2815 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2816 if
[ -f .bad_compare
]; then \
2817 echo
"Bootstrap comparison failure!"; \
2822 *-lean
) rm -rf stage
$$stage ;; \
2827 # Compare the object files in the current directory with those in the
2828 # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
2829 # running tail and the overhead of twice copying each object file.
2831 gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean
: force
2833 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2834 for file in
*$(objext
); do \
2835 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2837 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2838 for
dir in tmp-foo
$(SUBDIRS
); do \
2839 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2840 for file in
$$dir/*$(objext
); do \
2841 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2845 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2846 if
[ -f .bad_compare
]; then \
2847 echo
"Bootstrap comparison failure!"; \
2852 *-lean
) rm -rf stage
$$stage ;; \
2856 # Copy the object files from a particular stage into a subdirectory.
2858 -if
[ -d stage1
] ; then true
; else mkdir stage1
; fi
2859 -for
dir in .
$(SUBDIRS
) ; \
2861 if
[ -d stage1
/$$dir ] ; then true
; else mkdir stage1
/$$dir ; fi
; \
2863 -mv
$(STAGESTUFF
) stage1
2864 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2865 # dir will work properly.
2866 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage1
; else true
; fi
2867 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage1
; else true
; fi
2868 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage1
; else true
; fi
2869 -rm -f stage1
/libgcc.a
2871 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) stage1
/libgcc.a
; else true
; fi
2872 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
2873 cp stage1
/$${f} .
; \
2876 stage1
: force stage1-start lang.stage1
2879 -if
[ -d stage2
] ; then true
; else mkdir stage2
; fi
2880 -for
dir in .
$(SUBDIRS
) ; \
2882 if
[ -d stage2
/$$dir ] ; then true
; else mkdir stage2
/$$dir ; fi
; \
2884 -mv
$(STAGESTUFF
) stage2
2885 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2886 # dir will work properly.
2887 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage2
; else true
; fi
2888 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage2
; else true
; fi
2889 -if
[ -f collect-ld
] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage2
; else true
; fi
2890 -rm -f stage2
/libgcc.a
2892 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) stage2
/libgcc.a
; else true
; fi
2893 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
2894 cp stage2
/$${f} .
; \
2897 stage2
: force stage2-start lang.stage2
2900 -if
[ -d stage3
] ; then true
; else mkdir stage3
; fi
2901 -for
dir in .
$(SUBDIRS
) ; \
2903 if
[ -d stage3
/$$dir ] ; then true
; else mkdir stage3
/$$dir ; fi
; \
2905 -mv
$(STAGESTUFF
) stage3
2906 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2907 # dir will work properly.
2908 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage3
; else true
; fi
2909 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage3
; else true
; fi
2910 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage3
; else true
; fi
2911 -rm -f stage3
/libgcc.a
2913 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) stage3
/libgcc.a
; else true
; fi
2914 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
2915 cp stage3
/$${f} .
; \
2918 stage3
: force stage3-start lang.stage3
2921 -if
[ -d stage4
] ; then true
; else mkdir stage4
; fi
2922 -for
dir in .
$(SUBDIRS
) ; \
2924 if
[ -d stage4
/$$dir ] ; then true
; else mkdir stage4
/$$dir ; fi
; \
2926 -mv
$(STAGESTUFF
) stage4
2927 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
2928 # dir will work properly.
2929 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage4
; else true
; fi
2930 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage4
; else true
; fi
2931 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage4
; else true
; fi
2932 -rm -f stage4
/libgcc.a
2934 -if
$(RANLIB_TEST
) ; then
$(RANLIB
) stage4
/libgcc.a
; else true
; fi
2935 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
2936 cp stage4
/$${f} .
; \
2939 stage4
: force stage4-start lang.stage4
2941 # Copy just the executable files from a particular stage into a subdirectory,
2942 # and delete the object files. Use this if you're just verifying a version
2943 # that is pretty sure to work, and you are short of disk space.
2944 risky-stage1
: stage1
2947 risky-stage2
: stage2
2950 risky-stage3
: stage3
2953 risky-stage4
: stage4
2956 #In GNU Make, ignore whether `stage*' exists.
2957 .PHONY
: stage1 stage2 stage3 stage4
clean maintainer-clean TAGS bootstrap
2958 .PHONY
: risky-stage1 risky-stage2 risky-stage3 risky-stage4
2963 # The enquire rules are still useful for building new float-anything.h.
2964 # Special flags for compiling enquire.
2965 # We disable optimization to make floating point more reliable.
2966 ENQUIRE_CFLAGS
= -DNO_MEM
-DNO_LONG_DOUBLE_IO
-O0
2967 ENQUIRE_LDFLAGS
= $(LDFLAGS
)
2969 # Enquire target (This is a variable so that a target can choose not to
2973 # Test to see whether <float.h> exists in the system header files,
2974 # and is not derived from GCC.
2976 [ -f
$(SYSTEM_HEADER_DIR
)/float.h
] && \
2977 if grep
'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR
)/float.h
>/dev
/null
; \
2980 # We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
2981 # to ensure, we're emitting a full blown <float.h> ourselves.
2982 FLOAT_H_TEST
= false
2984 # Used to compile enquire with standard cc, but have forgotten why.
2985 # Let's try with GCC.
2986 enquire
: enquire.o
$(GCC_PARTS
)
2987 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ENQUIRE_LDFLAGS
) enquire.o
-o
$@
2988 enquire.o
: $(srcdir)/enquire.c
$(GCC_PASSES
) stmp-int-hdrs
2989 if
$(FLOAT_H_TEST
); then \
2990 rm -f
include/float.h
; \
2991 SYS_FLOAT_H_WRAP
=1; \
2993 SYS_FLOAT_H_WRAP
=0; \
2995 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(ENQUIRE_CFLAGS
) \
2996 -DSYS_FLOAT_H_WRAP
=$$SYS_FLOAT_H_WRAP \
2997 -I.
-c
$(srcdir)/enquire.c
2999 # Create float.h source for the native machine.
3000 # Make it empty if we can use the system float.h without changes.
3001 float.h-nat
: enquire
3002 -.
/enquire
-f
> tmp-float.h
3003 grep
'#define [^_]' tmp-float.h
>/dev
/null || true
> tmp-float.h
3004 mv tmp-float.h float.h-nat
3006 # Create a dummy float.h source for a cross-compiler.
3007 # ??? This isn't used anymore. Should we create config/float-unkn.h
3008 # and make that the default float_format in configure?
3010 echo
"#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
3011 echo
"#error float.h values not known for cross-compiler" >> t-float.h-cross
3012 echo
"#endif" >> t-float.h-cross
3013 mv t-float.h-cross float.h-cross