1 # Makefile for GNU C compiler.
2 # Copyright (C) 1987, 88, 90-98, 1999 Free Software Foundation, Inc.
4 #This file is part of GNU CC.
6 #GNU CC is free software; you can redistribute it and/or modify
7 #it under the terms of the GNU General Public License as published by
8 #the Free Software Foundation; either version 2, or (at your option)
11 #GNU CC is distributed in the hope that it will be useful,
12 #but WITHOUT ANY WARRANTY; without even the implied warranty of
13 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 #GNU General Public License for more details.
16 #You should have received a copy of the GNU General Public License
17 #along with GNU CC; see the file COPYING. If not, write to
18 #the Free Software Foundation, 59 Temple Place - Suite 330,
19 #Boston MA 02111-1307, USA.
21 # The targets for external use include:
22 # all, doc, proto, install, install-cross, install-cross-rest,
23 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24 # stage1, stage2, stage3, stage4.
26 # Suppress smart makes who think they know how to automake Yacc files
29 # Directory where sources are, from where we are.
33 # Variables that exist for you to override.
34 # See below for how to change them for certain systems.
36 # List of language subdirectories.
37 # This is overridden by configure.
40 # Selection of languages to be made.
41 # This is overridden by configure.
42 CONFIG_LANGUAGES
= @all_languages@
43 LANGUAGES
= c proto gcov
$(exeext
) $(CONFIG_LANGUAGES
)
45 # Languages should create dependencies of $(INTL_TARGETS) on generated
46 # sources in Make-lang.in. Example:
47 # $(INTL_TARGETS): $(srcdir)/cp/parse.c
48 INTL_TARGETS
= intl.
all intl.
install intl.distdir
50 # Selection of languages to be made during stage1 build.
51 # This is overridden by configure.
52 BOOT_LANGUAGES
= c @all_boot_languages@
58 # Various ways of specifying flags for compilations:
59 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
60 # BOOT_CFLAGS is the value of CFLAGS to pass
61 # to the stage2 and stage3 compilations
62 # WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
63 # (And for stage 1 if the native compiler is GCC.) It is
64 # separate from BOOT_CFLAGS because people tend to override optimization
65 # flags and we'd like them to still have warnings turned on. They are free
66 # to explicitly turn warnings off if they wish.
67 # XCFLAGS is used for most compilations but not when using the GCC just built.
68 # TCFLAGS is used for compilations with the GCC just built.
71 CFLAGS
= -g @stage1_warn_cflags@
72 BOOT_CFLAGS
= -O2
$(CFLAGS
)
73 WARN_CFLAGS
= -W
-Wall
74 # These exists to be overridden by the x-* and t-* files, respectively.
83 # srcdir might be a relative pathname which won't be valid in a subdirectory,
84 # so we must use objdir/srcdir instead to make it safe. objdir is always
86 BISON
= `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
87 /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
88 *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
89 esac; else echo bison ; fi`
91 LEX
= `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
98 # on sysV, define this as cp.
100 # Some systems may be missing symbolic links, regular links, or both.
101 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
104 # These permit overriding just for certain files.
105 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
106 INSTALL_DATA
= @INSTALL_DATA@
107 MAKEINFO
= `if [ -f $(objdir)/../texinfo/makeinfo/Makefile ] ; \
108 then echo $(objdir)/../texinfo/makeinfo/makeinfo ; \
109 else echo makeinfo ; fi`
112 # For GNUmake: let us decide what gets passed to recursive makes.
116 # Define this as & to perform parallel make on a Sequent.
117 # Note that this has some bugs, and it seems currently necessary
118 # to compile all the gen* files first by hand to avoid erroneous results.
121 # How to invoke ranlib.
123 # Test to use to see whether ranlib exists on the system.
126 ||
[ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
]
128 # Compiler to use for compiling libgcc1.a.
129 # OLDCC should not be the GNU C compiler,
130 # since that would compile typical libgcc1.a functions such as mulsi3
131 # into infinite recursions.
134 # CFLAGS for use with OLDCC, for compiling libgcc1.a.
135 # NOTE: -O does not work on some Unix systems!
138 # Version of ar to use when compiling libgcc1.a.
142 # Target to use when installing include directory. Either
143 # install-headers-tar or install-headers-cpio.
144 INSTALL_HEADERS_DIR
= @build_install_headers_dir@
146 # Header files that are made available under the same name
147 # to programs compiled with GCC.
148 USER_H
= $(srcdir)/ginclude
/stdarg.h
$(srcdir)/ginclude
/stddef.h \
149 $(srcdir)/ginclude
/varargs.h
$(srcdir)/ginclude
/va-alpha.h \
150 $(srcdir)/ginclude
/va-h8300.h
$(srcdir)/ginclude
/va-i860.h \
151 $(srcdir)/ginclude
/va-i960.h
$(srcdir)/ginclude
/va-mips.h \
152 $(srcdir)/ginclude
/va-m88k.h
$(srcdir)/ginclude
/va-mn10200.h \
153 $(srcdir)/ginclude
/va-mn10300.h
$(srcdir)/ginclude
/va-pa.h \
154 $(srcdir)/ginclude
/va-pyr.h
$(srcdir)/ginclude
/va-sparc.h \
155 $(srcdir)/ginclude
/va-clipper.h
$(srcdir)/ginclude
/va-spur.h \
156 $(srcdir)/ginclude
/va-m32r.h
$(srcdir)/ginclude
/va-sh.h \
157 $(srcdir)/ginclude
/va-v850.h
$(srcdir)/ginclude
/va-arc.h \
158 $(srcdir)/ginclude
/iso646.h
$(srcdir)/ginclude
/va-ppc.h \
159 $(srcdir)/ginclude
/va-c4x.h
$(EXTRA_HEADERS
) $(LANG_EXTRA_HEADERS
) \
160 $(srcdir)/ginclude
/proto.h
$(srcdir)/ginclude
/stdbool.h
162 # Target to use whe installing assert.h. Some systems may
163 # want to set this empty.
164 INSTALL_ASSERT_H
= install-assert-h
166 # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
167 # Usually the one we just built.
168 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
169 GCC_FOR_TARGET
= .
/xgcc
-B
$(build_tooldir
)/bin
/ -B.
/ -I
$(build_tooldir
)/include
171 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
172 # It omits XCFLAGS, and specifies -B./.
173 # It also specifies -I./include to find, e.g., stddef.h.
174 GCC_CFLAGS
=$(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) -I.
/include $(TCFLAGS
)
176 # Sed command to transform gcc to installed name. Overwritten by configure.
177 program_transform_name
= @program_transform_name@
178 program_transform_cross_name
= s
,^
,$(target_alias
)-,
180 build_canonical
= @build_canonical@
181 host_canonical
= @host_canonical@
183 # Tools to use when building a cross-compiler.
184 # These are used because `configure' appends `cross-make'
185 # to the makefile when making a cross-compiler.
187 # Use the tools from the build tree, if they are available.
189 # objdir is set by configure.
193 if [ -f $(objdir)/../binutils/ar ] ; then \
194 echo $(objdir)/../binutils/ar ; \
196 if [ "$(host_canonical)" = "$(target)" ] ; then \
199 t='$(program_transform_name)'; echo ar | sed -e $$t ; \
202 AR_FLAGS_FOR_TARGET
= rc
203 RANLIB_FOR_TARGET
= ` \
204 if [ -f $(objdir)/../binutils/ranlib ] ; then \
205 echo $(objdir)/../binutils/ranlib ; \
207 if [ "$(host_canonical)" = "$(target)" ] ; then \
210 t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
213 RANLIB_TEST_FOR_TARGET
= \
214 [ -f
$(RANLIB_FOR_TARGET
) ] \
215 ||
( [ "$(host_canonical)" = "$(target)" ] \
216 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
218 # Dir to search for system headers. Overridden by cross-make.
219 SYSTEM_HEADER_DIR
= /usr
/include
221 # Control whether to run fixproto.
222 STMP_FIXPROTO
= stmp-fixproto
224 # Test to see whether <limits.h> exists in the system header files.
225 LIMITS_H_TEST
= [ -f
$(SYSTEM_HEADER_DIR
)/limits.h
]
228 target_alias
=@target_alias@
229 xmake_file
=@dep_host_xmake_file@
230 tmake_file
=@dep_tmake_file@
231 out_file
=$(srcdir)/config
/@out_file@
232 out_object_file
=@out_object_file@
233 md_file
=$(srcdir)/config
/@md_file@
234 tm_file
=@tm_file_list@
235 build_xm_file
=@build_xm_file_list@
236 host_xm_file
=@host_xm_file_list@
237 lang_specs_files
=@lang_specs_files@
238 lang_options_files
=@lang_options_files@
239 lang_tree_files
=@lang_tree_files@
240 GCC_THREAD_FILE
=@thread_file@
241 OBJC_BOEHM_GC
=@objc_boehm_gc@
242 GTHREAD_FLAGS
=@gthread_flags@
243 # Be prepared for gcc2 merges.
244 gcc_version
=@gcc_version@
245 gcc_version_trigger
=@gcc_version_trigger@
246 version
=$(gcc_version
)
247 mainversion
=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
249 # Common prefix for installation directories.
250 # NOTE: This directory must exist when you start installation.
252 # Directory in which to put localized header files. On the systems with
253 # gcc as the native cc, `local_prefix' may not be `prefix' which is
255 # NOTE: local_prefix *should not* default from prefix.
256 local_prefix
= @local_prefix@
257 # Directory in which to put host dependent programs and libraries
258 exec_prefix = @
exec_prefix@
259 # Directory in which to put the executable for the command `gcc'
261 # Directory in which to put the directories used by the compiler.
263 # Directory in which the compiler finds executables, libraries, etc.
264 libsubdir
= $(libdir)/gcc-lib
/$(target_alias
)/$(version
)
265 # Used to produce a relative $(gcc_tooldir) in gcc.o
266 unlibsubdir
= ..
/..
/..
267 # Directory in which to find other cross-compilation tools and headers.
269 # Used in install-cross.
270 gcc_tooldir
= @gcc_tooldir@
271 # Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
272 build_tooldir
= $(exec_prefix)/$(target_alias
)
273 # Directory in which the compiler finds g++ includes.
274 gcc_gxx_include_dir
= @gcc_gxx_include_dir@
275 # Directory to search for site-specific includes.
276 includedir = $(local_prefix
)/include
277 # assertdir is overridden in cross-make.
278 # (But this currently agrees with what is in cross-make.)
279 assertdir
= $(gcc_tooldir
)/include
280 # where the info files go
282 # Where cpp should go besides $prefix/bin if necessary
283 cpp_install_dir
= @cpp_install_dir@
284 # where the locale files go
285 datadir = $(prefix)/@DATADIRNAME@
286 localedir
= $(datadir)/locale
287 # Extension (if any) to put in installed man-page filename.
290 exeext
= @host_exeext@
291 build_exeext
= @build_exeext@
293 # Directory in which to put man pages.
295 man1dir = $(mandir)/man1
296 # Dir for temp files.
299 # Top build directory, relative to here.
302 # Whether we were configured with NLS.
305 # Internationalization library.
306 INTLLIBS
= @INTLLIBS@
308 # List of internationalization subdirectories.
310 INTL_SUBDIRS
= intl
$(POSUB
)
312 # Additional system libraries to link with.
315 # Change this to a null string if obstacks are installed in the
319 # The GC method to be used on this system.
322 # If a supplementary library is being used for the GC.
325 # Configure will set these if you need vfprintf and possibly _doprnt support.
329 # Specify the rule for actually making libgcc.a,
331 # and the rule for installing it.
332 INSTALL_LIBGCC
= install-libgcc
334 # Specify the rule for actually making libgcc1.a.
335 # The value may be empty; that means to do absolutely nothing
336 # with or for libgcc1.a.
339 # Specify the rule for making libgcc1.a for a cross-compiler.
340 # The default rule assumes that libgcc1.a is supplied by the user.
341 CROSS_LIBGCC1
= libgcc1.cross
343 # Specify the rule for actually making libgcc2.a.
346 # Options to use when compiling libgcc2.a.
347 # -g1 causes output of debug info only for file-scope entities.
348 # we use this here because that should be enough, and also
349 # so that -g1 will be tested.
351 LIBGCC2_DEBUG_CFLAGS
= -g1
352 LIBGCC2_CFLAGS
= -O2
$(LIBGCC2_INCLUDES
) $(GCC_CFLAGS
) $(TARGET_LIBGCC2_CFLAGS
) $(LIBGCC2_DEBUG_CFLAGS
) $(GTHREAD_FLAGS
) -DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
354 # Additional options to use when compiling libgcc2.a.
355 # Some targets override this to -Iinclude
358 # Additional target-dependent options for compiling libgcc2.a.
359 TARGET_LIBGCC2_CFLAGS
=
361 # Things which must be built before building libgcc2.a.
362 # Some targets override this to stmp-int-hdrs
365 # libgcc1-test target (must also be overridable for a target)
366 LIBGCC1_TEST
= libgcc1-test
368 # List of extra executables that should be compiled for this target machine
369 # that are used for compiling from source code to object code.
370 # The rules for compiling them should be in the t-* file for the machine.
371 EXTRA_PASSES
=@extra_passes@
373 # Like EXTRA_PASSES, but these are used when linking.
374 EXTRA_PROGRAMS
= @extra_programs@
376 # List of extra object files that should be compiled for this target machine.
377 # The rules for compiling them should be in the t-* file for the machine.
378 EXTRA_PARTS
= @extra_parts@
380 # List of extra object files that should be compiled and linked with
381 # compiler proper (cc1, cc1obj, cc1plus).
382 EXTRA_OBJS
= @extra_objs@
384 # List of extra object files that should be compiled and linked with
386 EXTRA_GCC_OBJS
=@host_extra_gcc_objs@
388 # List of additional header files to install.
389 # Often this is edited directly by `configure'.
390 EXTRA_HEADERS
=@extra_headers_list@
392 # Set this to `collect2' to enable use of collect2.
393 USE_COLLECT2
= @will_use_collect2@
394 # If we might be using collect2, then this variable will be set to
395 # -DUSE_COLLECT2. toplev.c, collect2.c and libgcc2.c all need to
396 # if we may be using collect2.
397 MAYBE_USE_COLLECT2
= @maybe_use_collect2@
398 # It is convenient for configure to add the assignment at the beginning,
399 # so don't override it here.
400 USE_COLLECT2
= collect2
$(exeext
)
402 # List of extra C and assembler files to add to libgcc1.a.
403 # Assembler files should have names ending in `.asm'.
406 # List of extra C and assembler files to add to libgcc2.a.
407 # Assembler files should have names ending in `.asm'.
410 # Handle cpp installation.
414 # We do not try to build float.h anymore. Let configure select the
415 # appropriate pre-built float.h file for the target.
416 FLOAT_H
=@float_h_file@
418 # Program to convert libraries.
421 # Control whether header files are installed.
422 INSTALL_HEADERS
=install-headers
424 # Additional directories of header files to run fixincludes on.
425 # These should be directories searched automatically by default
426 # just as /usr/include is.
427 # *Do not* use this for directories that happen to contain
428 # header files, but are not searched automatically by default.
429 # On most systems, this is empty.
430 OTHER_FIXINCLUDES_DIRS
=
432 # A list of all the language-specific executables.
433 # This is overridden by configure.
434 COMPILERS
= cc1
$(exeext
) @all_compilers@
436 # List of things which should already be built whenever we try to use xgcc
437 # to compile anything (without linking).
438 GCC_PASSES
=xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
)
440 # List of things which should already be built whenever we try to use xgcc
442 GCC_PARTS
=$(GCC_PASSES
) $(LIBGCC
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) $(EXTRA_PARTS
)
444 # Directory to link to, when using the target `maketest'.
447 # Guaranteed to not exist when not passing md through cpp.
448 # This value is overridden directly by configure.
449 MD_FILE
= md-cpp-not-used
451 # Flags to use when cross-building GCC.
452 # Prefix to apply to names of object files when using them
453 # to run on the machine we are compiling on.
455 # Prefix to apply to names of object files when compiling them
456 # to run on the machine we are compiling on.
457 # The default for this variable is chosen to keep these rules
458 # out of the way of the other rules for compiling the same source files.
461 HOST_CFLAGS
=$(ALL_CFLAGS
)
463 HOST_INTLLIBS
=$(INTLLIBS
)
464 HOST_LDFLAGS
=$(LDFLAGS
)
465 HOST_CPPFLAGS
=$(ALL_CPPFLAGS
)
466 HOST_ALLOCA
=$(ALLOCA
)
467 HOST_MALLOC
=$(MALLOC
)
468 HOST_OBSTACK
=$(OBSTACK
)
469 HOST_VFPRINTF
=$(VFPRINTF
)
470 HOST_DOPRINT
=$(DOPRINT
)
472 # Actual name to use when installing a native compiler.
473 GCC_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcc | sed -e $$t`
474 CPP_INSTALL_NAME
= `t='$(program_transform_name)'; echo cpp | sed -e $$t`
475 PROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo protoize | sed -e $$t`
476 UNPROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
477 GCOV_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcov | sed -e $$t`
479 # Actual name to use when installing a cross-compiler.
480 GCC_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
481 PROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
482 UNPROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
484 # Choose the real default target.
487 # Choose the real install target.
488 INSTALL_TARGET
=install-normal
490 # Setup the testing framework, if you have one
491 EXPECT
= `if [ -f $${rootme}/../expect/expect ] ; then \
492 echo $${rootme}/../expect/expect ; \
493 else echo expect ; fi`
495 RUNTEST
= `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
496 echo $${srcdir}/../dejagnu/runtest ; \
497 else echo runtest; fi`
500 # Extra symbols for fixproto to define when parsing headers.
503 # Extra flags to use when compiling crt{begin,end}.o.
506 # Extra flags to use when compiling [m]crt0.o.
509 # "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
512 # End of variables for you to override.
514 # Definition of `all' is here so that new rules inserted by sed
515 # do not specify the default target.
516 # The real definition is under `all.internal' (for native compilers)
517 # or `all.cross' (for cross compilers).
520 # This tells GNU Make version 3 not to put all variables in the environment.
523 # sed inserts variable overrides after the following line.
537 # Now figure out from those variables how to compile and link.
541 # IN_GCC tells various files that system.h, toplev.c, etc are available.
542 INTERNAL_CFLAGS
= $(CROSS
) -DIN_GCC @extra_c_flags@
544 # This is the variable actually used when we compile.
545 # If you change this line, you probably also need to change the definition
546 # of HOST_CFLAGS in build-make to match.
547 ALL_CFLAGS
= $(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) $(XCFLAGS
) \
551 ALL_CPPFLAGS
= $(CPPFLAGS
) $(X_CPPFLAGS
) $(T_CPPFLAGS
)
553 # Even if ALLOCA is set, don't use it if compiling with GCC.
554 USE_ALLOCA
= ${ALLOCA}
555 USE_HOST_ALLOCA
= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
556 USE_HOST_MALLOC
= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
557 USE_HOST_OBSTACK
= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
558 USE_HOST_VFPRINTF
= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
559 USE_HOST_DOPRINT
= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
561 # Dependency on obstack, alloca, malloc or whatever library facilities
562 # are not installed in the system libraries.
563 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
564 LIBDEPS
= $(INTLLIBS
) $(OBSTACK
) $(ALLOCA
) $(MALLOC
) $(VFPRINTF
) $(DOPRINT
)
566 # Likewise, for use in the tools that must run on this machine
567 # even if we are cross-building GCC.
568 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
569 HOST_LIBDEPS
= $(HOST_PREFIX
)$(HOST_INTLLIBS
) $(HOST_PREFIX
)$(HOST_OBSTACK
) $(HOST_PREFIX
)$(HOST_ALLOCA
) $(HOST_PREFIX
)$(HOST_MALLOC
) $(HOST_PREFIX
)$(HOST_VFPRINTF
) $(HOST_PREFIX
)$(HOST_DOPRINT
)
571 # How to link with both our special library facilities
572 # and the system's installed libraries.
573 LIBS
= $(OBSTACK
) $(USE_ALLOCA
) $(MALLOC
) $(INTLLIBS
) @LIBS@
$(VFPRINTF
) $(DOPRINT
) $(CLIB
) ..
/libiberty
/libiberty.a
575 # Likewise, for use in the tools that must run on this machine
576 # even if we are cross-building GCC.
577 HOST_LIBS
= $(USE_HOST_OBSTACK
) $(USE_HOST_ALLOCA
) $(USE_HOST_MALLOC
) \
578 $(HOST_INTLLIBS
) $(USE_HOST_VFPRINTF
) $(USE_HOST_DOPRINT
) \
581 HOST_RTL
= $(HOST_PREFIX
)rtl.o
$(HOST_PREFIX
)bitmap.o
$(HOST_PREFIX
)ggc-none.o
582 HOST_RTLANAL
= $(HOST_PREFIX
)rtlanal.o
583 HOST_PRINT
= $(HOST_PREFIX
)print-rtl.o
584 HOST_ERRORS
= $(HOST_PREFIX
)errors.o
586 # Specify the directories to be searched for header files.
587 # Both . and srcdir are used, in that order,
588 # so that tm.h and config.h will be found in the compilation
589 # subdirectory rather than in the source directory.
590 INCLUDES
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-I
$(srcdir)/..
/include
592 # Always use -I$(srcdir)/config when compiling.
594 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $<
596 # This tells GNU make version 3 not to export all the variables
597 # defined in this file into the environment.
600 # Support for additional languages (other than c and objc).
601 # ??? objc can be supported this way too (leave for later).
603 # These next lines are overridden by configure.
604 LANG_MAKEFILES
= @all_lang_makefiles@
605 LANG_STAGESTUFF
= @all_stagestuff@
606 LANG_DIFF_EXCLUDES
= @all_diff_excludes@
607 LANG_LIB2FUNCS
= @all_lib2funcs@
608 LANG_EXTRA_HEADERS
= @all_headers@
610 # Flags to pass to recursive makes.
611 # CC is set by configure. Hosts without symlinks need special handling
612 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
614 # ??? The choices here will need some experimenting with.
615 ORDINARY_FLAGS_TO_PASS
= \
616 "AR_FLAGS_FOR_TARGET=$(AR_FLAGS_FOR_TARGET)" \
617 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
619 "BISONFLAGS=$(BISONFLAGS)" \
622 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
623 "LDFLAGS=$(LDFLAGS)" \
625 "LEXFLAGS=$(LEXFLAGS)" \
628 "MAKEINFO=$(MAKEINFO)" \
629 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
630 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
631 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
633 "STAGE_PREFIX=@stage_prefix_set_by_configure@" \
635 "build_exeext=$(build_exeext)" \
637 "exec_prefix=$(exec_prefix)" \
639 "local_prefix=$(local_prefix)" \
640 "gxx_include_dir=$(gcc_gxx_include_dir)" \
641 "tooldir=$(tooldir)" \
642 "gcc_tooldir=$(gcc_tooldir)" \
644 "libsubdir=$(libsubdir)" \
645 "datadir=$(datadir)" \
646 "distdir=../tmp/\$$(subdir)" \
647 "localedir=$(localedir)"
648 FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) "CC=@cc_set_by_configure@"
649 PREPEND_DOTDOT_TO_RELATIVE_PATHS
= sed \
650 -e
's|^ *[^ /][^ /]*/|%&|' \
652 -e
's|% *[^- /]|%&|g' \
655 SUBDIR_FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) \
656 "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
658 # Lists of files for various purposes.
660 # Language-specific object files for C and Objective C.
661 C_AND_OBJC_OBJS
= c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
662 c-aux-info.o c-common.o c-iterate.o ggc-callbacks.o @extra_c_objs@
664 # Language-specific object files for C.
665 C_OBJS
= c-parse.o c-lang.o
$(C_AND_OBJC_OBJS
)
667 # Language-independent object files.
668 OBJS
= toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
669 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o real.o \
670 builtins.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o \
671 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
672 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
673 regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
674 insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o \
675 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
676 profile.o insn-attrtab.o
$(out_object_file
) $(EXTRA_OBJS
) convert.o \
677 mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o \
680 # GEN files are listed separately, so they can be built before doing parallel
681 # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
682 # them before rtl.o is compiled.
683 GEN
= genemit genoutput genrecog genextract genflags gencodes genconfig \
684 genpeep gengenrtl gencheck
688 # Files to be copied away after each stage in building.
689 STAGESTUFF
= *$(objext
) insn-flags.h insn-config.h insn-codes.h \
690 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
691 insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
692 s-flags s-config s-codes s-mlib s-under\
693 s-output s-recog s-emit s-extract s-peep s-check \
694 s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
695 genemit
$(build_exeext
) genoutput
$(build_exeext
) genrecog
$(build_exeext
) \
696 genextract
$(build_exeext
) genflags
$(build_exeext
) gencodes
$(build_exeext
) \
697 genconfig
$(build_exeext
) genpeep
$(build_exeext
) genattrtab
$(build_exeext
) \
698 genattr
$(build_exeext
) genopinit
$(build_exeext
) gengenrtl
$(build_exeext
) \
699 gencheck
$(build_exeext
) \
700 xgcc
$(exeext
) xcpp
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
) \
701 $(EXTRA_PARTS
) $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
702 $(CCCP
)$(exeext
) cc1obj
$(exeext
) enquire
$(exeext
) \
703 protoize
$(exeext
) unprotoize
$(exeext
) \
704 specs collect2
$(exeext
) $(USE_COLLECT2
) underscore.c \
706 *.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop \
707 *.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.gcse
*.flow2
*.peephole2 \
711 # Members of libgcc1.a.
712 LIB1FUNCS
= _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
713 _lshrsi3 _ashrsi3 _ashlsi3 \
714 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
715 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
716 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
717 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
718 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
720 # Library members defined in libgcc2.c.
721 LIB2FUNCS
= _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
722 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
723 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
724 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
725 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
726 _fixtfdi _fixunstfdi _floatditf \
727 __gcc_bcmp _varargs __dummy _eprintf \
728 _bb _shtab _clear_cache _trampoline __main _exit \
733 FPBIT_FUNCS
= _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
734 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
735 _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
738 DPBIT_FUNCS
= _pack_df _unpack_df _addsub_df _mul_df _div_df \
739 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
740 _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
743 # The files that "belong" in CONFIG_H are deliberately omitted
744 # because having them there would not be useful in actual practice.
745 # All they would do is cause complete recompilation every time
746 # one of the machine description files is edited.
747 # That may or may not be what one wants to do.
748 # If it is, rm *.o is an easy way to do it.
749 # CONFIG_H = $(host_xm_file) $(tm_file)
751 RTL_BASE_H
= rtl.h rtl.def machmode.h machmode.def
752 RTL_H
= $(RTL_BASE_H
) genrtl.h
753 TREE_H
= tree.h real.h tree.def machmode.h machmode.def tree-check.h
754 BASIC_BLOCK_H
= basic-block.h bitmap.h sbitmap.h
755 DEMANGLE_H
= $(srcdir)/..
/include/demangle.h
757 EXPR_H
= expr.h insn-codes.h
758 REGS_H
= regs.h varray.h machmode.h machmode.def
760 # Language makefile fragments.
762 # The following targets define the interface between us and the languages.
764 # all.build, all.cross, start.encap, rest.encap,
766 # install-normal, install-common, install-info, install-man,
767 # uninstall, distdir,
768 # mostlyclean, clean, distclean, extraclean, maintainer-clean,
769 # stage1, stage2, stage3, stage4
771 # Each language is linked in with a series of hooks (since we can't use `::'
772 # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
773 # Configure computes and adds these here.
778 # sed inserts language fragments after the following line.
779 ####language fragments
782 # End of language makefile fragments.
784 # The only suffixes we want for implicit rules are .c and .o, so clear
785 # the list and add them. This speeds up GNU Make, and allows -r to work.
789 Makefile
: $(srcdir)/Makefile.in config.status
$(srcdir)/version.c \
790 $(xmake_file
) $(tmake_file
) $(LANG_MAKEFILES
)
791 $(SHELL
) $(srcdir)/configure.frag
$(srcdir) "$(SUBDIRS)" \
792 "$(xmake_file)" "$(tmake_file)"
793 cp config.status config.run
794 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.run
797 $(srcdir)/configure
: $(srcdir)/configure.in
798 cd
$(srcdir); autoconf
800 # cstamp-h.in controls rebuilding of config.in.
801 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
802 # delete it. A stamp file is needed as autoheader won't update the file if
803 # nothing has changed.
804 # It remains in the source directory and is part of the distribution.
805 # This follows what is done in shellutils, fileutils, etc.
806 # "echo timestamp" is used instead of touch to be consistent with other
807 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
808 # ??? Newer versions have a maintainer mode that may be useful here.
809 $(srcdir)/config.in
: $(srcdir)/cstamp-h.in
810 $(srcdir)/cstamp-h.in
: $(srcdir)/configure.in
$(srcdir)/acconfig.h
811 cd
$(srcdir) && autoheader
812 @
rm -f
$(srcdir)/cstamp-h.in
813 echo timestamp
> $(srcdir)/cstamp-h.in
814 auto-host.h
: cstamp-h
; @true
815 cstamp-h
: config.in config.status
816 CONFIG_HEADERS
=auto-host.h
:config.in LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
818 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
819 # a target to build even if it is up-to-date. So we must verify that
820 # config.status does not exist before failing.
821 config.status
: configure version.c
822 @if
[ ! -f config.status
] ; then \
823 echo You must configure gcc. Look at the INSTALL file for details.
; \
826 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
--recheck
; \
829 all.internal
: start.encap rest.encap doc
830 # This is what to compile if making a cross-compiler.
831 # Note that we can compile enquire using the cross-compiler just built,
832 # although we can't run it on this machine.
833 all.cross
: native gcc-cross specs stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) \
834 $(LIBGCC1_TEST
) $(EXTRA_PARTS
) lang.
all.cross doc
835 # This is what to compile if making gcc with a cross-compiler.
836 all.build
: native xgcc
$(exeext
) xcpp
$(exeext
) $(EXTRA_PARTS
) lang.
all.build
837 # This is what must be made before installing GCC and converting libraries.
838 start.encap
: native xgcc
$(exeext
) xcpp
$(exeext
) specs
$(LIBGCC1
) \
839 xlimits.h lang.start.encap
840 # These can't be made until after GCC can run.
841 rest.encap
: stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) $(EXTRA_PARTS
) lang.rest.encap
842 # This is what is made with the host's compiler
843 # whether making a cross compiler or not.
844 native
: config.status auto-host.h
cpp$(exeext
) intl.
all $(LANGUAGES
) \
845 $(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
)
847 # Define the names for selecting languages in LANGUAGES.
851 # Tell GNU make these are phony targets.
852 .PHONY
: C c PROTO proto
854 # On the target machine, finish building a cross compiler.
855 # This does the things that can't be done on the host machine.
856 rest.cross
: $(LIBGCC
) specs
858 # Verify that it works to compile and link libgcc1-test.
859 # If it does, then there are sufficient replacements for libgcc1.a.
860 libgcc1-test
: libgcc1-test.o native
$(GCC_PARTS
)
861 @echo
"Testing libgcc1. Ignore linker warning messages."
862 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) libgcc1-test.o
-o libgcc1-test \
863 -nostartfiles
-nostdlib
`$(GCC_FOR_TARGET) --print-libgcc-file-name`
864 libgcc1-test.o
: libgcc1-test.c native xgcc
$(exeext
)
865 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) -c
$(srcdir)/libgcc1-test.c
867 # Recompile all the language-independent object files.
868 # This is used only if the user explicitly asks for it.
869 compilations
: ${OBJS}
871 # Create a list of the language-independent object files so the language
872 # subdirectories needn't mention their names explicitly.
873 stamp-objlist
: $(OBJS
)
874 echo
" $(OBJS)" | sed
-e
's, \([a-z0-9]\), ../\1,g' -e
's/\.o/$(objext)/g' >stamp-objlist
876 # We call this executable `xgcc' rather than `gcc'
877 # to avoid confusion if the current directory is in the path
878 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
879 xgcc
$(exeext
): gcc.o gccspec.o version.o intl.o
prefix.o \
880 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
881 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o gccspec.o intl.o \
882 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
884 # We call this executable `xcpp' rather than `cpp'
885 # since the real preprocessor is named `cpp'. It too is renamed
886 # when it is installed.
887 # The only difference from xgcc is that it's linked with cppspec.o
888 # instead of gccspec.o.
889 xcpp
$(exeext
): gcc.o cppspec.o version.o intl.o
prefix.o \
890 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
891 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o cppspec.o intl.o \
892 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
894 # Dump a specs file to make -B./ read these specs over installed ones.
896 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
899 # We do want to create an executable named `xgcc', so we can use it to
901 # Also create gcc-cross, so that install-common will install properly.
902 gcc-cross
: xgcc
$(exeext
)
903 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
905 cc1
$(exeext
): $(P
) $(OBJS
) $(C_OBJS
) $(LIBDEPS
)
906 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(OBJS
) $(C_OBJS
) $(LIBS
)
908 # Build the version of limits.h that we will install.
909 xlimits.h
: glimits.h limitx.h limity.h
910 if
$(LIMITS_H_TEST
) ; then \
911 cat
$(srcdir)/limitx.h
$(srcdir)/glimits.h
$(srcdir)/limity.h
> tmp-xlimits.h
; \
913 cat
$(srcdir)/glimits.h
> tmp-xlimits.h
; \
915 mv tmp-xlimits.h xlimits.h
918 # This is done in two parts because some functions, in libgcc1.c,
919 # must be compiled with something other than GCC,
920 # while the rest, in libgcc2.c, must be compiled with xgcc.
921 # That means we can't do libgcc2.c until after xgcc, cc1, etc.
923 # Use this as value of LIBGCC1 to cause conversion to GNU library format.
924 # LIBCONVERT should put its output in libgcc1.conv.
925 libgcc1.conv
: libgcc1.a
926 $(LIBCONVERT
) libgcc1.a libgcc1.conv
928 # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
929 # Make an empty file instead.
930 libgcc1.null
: $(GCC_PASSES
)
931 echo
"void __foo () {}" > dummy.c
932 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) -c dummy.c
933 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) libgcc1.null dummy
$(objext
)
934 rm -f dummy
$(objext
) dummy.c
936 # This is $(LIBGCC1) for a cross-compiler.
937 # We have no automatic way of building libgcc1.a,
938 # so it's up to the installer to find a way to do that.
939 # This rule deliberately does not depend on libgcc1.a
940 # so that it will fail if the installer hasn't provided it.
942 mv libgcc1.a libgcc1.cross ||
(echo You must find a way to make libgcc1.a
; false
)
944 # Compile the library of arithmetic subroutines with the native compiler.
945 # Don't compile it with GCC!
946 # (That would cause most arithmetic functions to call themselves.)
948 # NOTE: If you modify these rules substantially, please be sure to
949 # check at least config/i386/t-sco5 and possibly other makefile
951 libgcc1.a
: libgcc1.c
$(CONFIG_H
) $(LIB1FUNCS_EXTRA
) config.status
953 # Actually build it in tmplibgcc1.a, then rename at end,
954 # so that libgcc1.a itself remains nonexistent if compilation is aborted.
955 # -e causes any failing command to make this rule fail.
956 # -e doesn't work in certain shells, so we test $$? as well.
957 # lynx has a broken ar, it always complains when the initial library is
958 # empty, thus this command works only if we don't do -e
959 # There is a trailing backslash (\) deleted from the following line.
961 for name in
$(LIB1FUNCS
); \
964 rm -f
$${name}$(objext
); \
965 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
-DL
$${name} $(srcdir)/libgcc1.c
; \
966 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
967 mv libgcc1
$(objext
) $${name}$(objext
); \
968 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
969 rm -f
$${name}$(objext
); \
971 # Some shells crash when a loop has no items.
972 # So make sure there is always at least one--`..'.
974 # We don't use -e here because there are if statements
975 # that should not make the command give up when the if condition is false.
976 # Instead, we test for failure after each command where it matters.
977 for file in ..
$(LIB1FUNCS_EXTRA
); \
979 if
[ x
$${file} != x..
]; then \
980 name
=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
982 if
[ $${name}.asm
= $${file} ]; then \
983 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
985 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
$${file}; \
986 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
987 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
988 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
989 rm -f
$${name}.s
$${name}$(objext
); \
993 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
994 $(RANLIB_FOR_TARGET
) tmplibgcc1.a
; \
996 mv tmplibgcc1.a libgcc1.a
998 # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
999 # functions. LIB1ASMSRC is the name of the source file in the config
1001 libgcc1-asm.a
: libgcc2.ready config.status
$(srcdir)/config
/$(LIB1ASMSRC
)
1002 -rm -f tmplibgcc1.a libgcc1.S
1003 cp
$(srcdir)/config
/$(LIB1ASMSRC
) libgcc1.S
1004 # Actually build it in tmplibgcc1.a, then rename at end,
1005 # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
1006 # -e causes any failing command to make this rule fail.
1007 # -e doesn't work in certain shells, so we test $$? as well.
1008 # lynx has a broken ar, it always complains when the initial library is
1009 # empty, thus this command works only if we don't do -e
1010 # There is a trailing backslash (\) deleted from the following line.
1012 for name in
$(LIB1ASMFUNCS
); \
1015 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} libgcc1.S
; \
1016 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1017 mv libgcc1
$(objext
) $${name}$(objext
); \
1018 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc1.a
$${name}$(objext
); \
1019 rm -f
$${name}$(objext
); \
1022 mv tmplibgcc1.a libgcc1-asm.a
1024 # Generate assembly versions of the functions required for libgcc1.
1025 # You'll still need to massage the code by hand (possibly hacking
1026 # underscores and local labels) but this will get you started.
1027 libgcc1.S
: libgcc1.c
$(CONFIG_H
) config.status
1030 for name in
$(LIB1FUNCS
); \
1033 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -S
-DL
$${name} $(srcdir)/libgcc1.c
; \
1034 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1035 echo
'#ifdef ' L
$${name} >> libgcc1.S
; \
1036 cat libgcc1.s
>> libgcc1.S
; \
1037 echo
'#endif /*' L
$${name} '*/' >> libgcc1.S
; \
1038 echo
"" >> libgcc1.S
; \
1041 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
1042 # But recompiling cc1 should not force recompilation of libgcc2.a.
1043 # If you want to force recompilation, delete libgcc2.a.
1044 libgcc2.ready
: $(GCC_PASSES
) $(LIBGCC2_DEPS
) stmp-int-hdrs
$(STMP_FIXPROTO
)
1045 -if
[ -f libgcc2.ready
] ; then \
1048 touch libgcc2.ready
; \
1051 LIB2ADD
= $(srcdir)/frame.c
$(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
)
1052 libgcc2.a
: libgcc2.c libgcc2.ready
$(CONFIG_H
) $(FPBIT
) $(DPBIT
) $(LIB2ADD
) \
1053 machmode.h longlong.h frame.h gbl-ctors.h config.status
1054 # Actually build it in tmplibgcc2.a, then rename at end,
1055 # so that libgcc2.a itself remains nonexistent if compilation is aborted.
1057 # -e causes any failing command to make this rule fail.
1058 # -e doesn't work in certain shells, so we test $$? as well.
1059 # lynx has a broken ar, it always complains when the initial library is
1060 # empty, thus this command works only if we don't do -e
1061 # There is a trailing backslash (\) deleted from the following line.
1063 for name in
$(LIB2FUNCS
); \
1066 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1067 $(MAYBE_USE_COLLECT2
) $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1068 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1069 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1070 rm -f
$${name}$(objext
); \
1072 for name in
$(LIB2FUNCS_EH
); \
1075 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) -fexceptions
$(INCLUDES
) -c \
1076 -DL
$${name} $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1077 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1078 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1079 rm -f
$${name}$(objext
); \
1081 if
[ x
$(FPBIT
) != x
]; then \
1082 for name in
$(FPBIT_FUNCS
); \
1085 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1086 -DFINE_GRAINED_LIBRARIES
$(FPBIT
) -o
$${name}$(objext
); \
1087 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1088 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1089 rm -f
$${name}$(objext
); \
1092 if
[ x
$(DPBIT
) != x
]; then \
1093 for name in
$(DPBIT_FUNCS
); \
1096 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1097 -DFINE_GRAINED_LIBRARIES
$(DPBIT
) -o
$${name}$(objext
); \
1098 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1099 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1100 rm -f
$${name}$(objext
); \
1103 # Some shells crash when a loop has no items.
1104 # So make sure there is always at least one--`..'.
1106 # We don't use -e here because there are if statements
1107 # that should not make the command give up when the if condition is false.
1108 # Instead, we test for failure after each command where it matters.
1109 for file in
$(LIB2ADD
); do \
1110 name
=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
1111 oname
=` echo $${name} | sed -e 's,.*/,,'`; \
1112 if
[ $${name}.txt
= $${file} ]; then \
1113 for f in ..
`cat $${file}`; do if
[ x
$${f} != x..
]; then \
1114 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1115 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1116 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" CC
="$(CC)" \
1117 CFLAGS
="$(CFLAGS)" HOST_PREFIX
="$(HOST_PREFIX)" \
1118 HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1119 LANGUAGES
="$(LANGUAGES)" \
1120 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $${f}; \
1121 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1122 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${f}; \
1128 if
[ $${name}.asm
= $${file} ]; then \
1129 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
1131 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
$${file}; \
1132 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1133 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${oname}$(objext
); \
1134 rm -f
$${name}.s
$${oname}$(objext
); \
1137 mv tmplibgcc2.a libgcc2.a
1138 # These lines were deleted from above the mv command
1139 # because ranlibing libgcc.a itself should suffice.
1140 # -if [ x${HPUX_GAS} = x ] ; then \
1141 # if $(RANLIB_TEST_FOR_TARGET) ; then \
1142 # $(RANLIB_FOR_TARGET) tmplibgcc2.a;
1146 # Combine the various libraries into a single library, libgcc.a.
1147 libgcc.a
: $(LIBGCC1
) $(LIBGCC2
)
1148 -rm -rf tmplibgcc.a libgcc.a tmpcopy
1150 -if
[ x
$(LIBGCC1
) != x
]; \
1151 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1154 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1155 # unwritable table of contents file, and then print an error message when
1156 # the second ar command tries to overwrite this file. To avoid the error
1157 # message from ar, we make sure all files are writable.
1158 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1159 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1160 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1162 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1163 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1165 # Actually build it in tmplibgcc.a, then rename at end,
1166 # so that libgcc.a itself remains nonexistent if compilation is aborted.
1167 mv tmplibgcc.a libgcc.a
1169 # Use the genmultilib shell script to generate the information the gcc
1170 # driver program needs to select the library directory based on the
1172 multilib.h
: s-mlib
; @true
1173 s-mlib
: $(srcdir)/genmultilib Makefile
1174 $(SHELL
) $(srcdir)/genmultilib \
1175 "$(MULTILIB_OPTIONS)" \
1176 "$(MULTILIB_DIRNAMES)" \
1177 "$(MULTILIB_MATCHES)" \
1178 "$(MULTILIB_EXCEPTIONS)" \
1179 "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
1180 $(srcdir)/move-if-change tmp-mlib.h multilib.h
1183 # Build multiple copies of libgcc.a, one for each target switch.
1184 stmp-multilib
: $(LIBGCC1
) libgcc2.c libgcc2.ready
$(CONFIG_H
) \
1186 $(LIB2ADD
) machmode.h longlong.h gbl-ctors.h config.status
1187 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
1188 dir=`echo $$i | sed -e 's/;.*$$//'`; \
1189 flags
=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
1190 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1191 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1192 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1193 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1194 RANLIB_FOR_TARGET
="$(RANLIB_FOR_TARGET)" \
1195 RANLIB_TEST_FOR_TARGET
="$(RANLIB_TEST_FOR_TARGET)" \
1196 LANGUAGES
="$(LANGUAGES)" \
1197 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1198 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS) $${flags}" \
1199 MULTILIB_CFLAGS
="$${flags}" \
1200 LIBGCC1
="$(LIBGCC1)" LIBGCC2
="$(LIBGCC2)" \
1201 dir="$${dir}" stmp-multilib-sub
; \
1202 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1206 # Subroutine of stmp-multilib so make -n works.
1209 if
[ -d
$(dir) ]; then \
1211 rm -f libgcc.a
$(EXTRA_MULTILIB_PARTS
); \
1214 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1215 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1216 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1217 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1218 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1219 LANGUAGES
="$(LANGUAGES)" \
1220 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC2
)
1221 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1223 else rm -f
$(LIBGCC1
); \
1225 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1228 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1229 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1230 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1231 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1232 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1233 LANGUAGES
="$(LANGUAGES)" \
1234 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC1
); \
1236 rm -rf tmplibgcc.a tmpcopy
1238 if
[ x
$(LIBGCC1
) != x
]; \
1239 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1242 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1243 # unwritable table of contents file, and then print an error message when
1244 # the second ar command tries to overwrite this file. To avoid the error
1245 # message from ar, we make sure all files are writable.
1246 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1247 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1248 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1249 rm -rf libgcc2.a tmpcopy
1250 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1251 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1253 if
[ -d
$(dir) ]; then true
; else mkdir
$(dir); fi
1254 mv tmplibgcc.a
$(dir)/libgcc.a
1255 for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
1256 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1257 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1258 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1259 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1260 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1261 LANGUAGES
="$(LANGUAGES)" \
1262 MULTILIB_CFLAGS
="$(MULTILIB_CFLAGS)" T
="t" t
$${f}; \
1263 mv t
$${f} $(dir)/$${f}; \
1267 # Compile two additional files that are linked with every program
1268 # linked using GCC on systems using COFF or ELF, for the sake of C++
1270 $(T
)crtbegin.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1271 defaults.h frame.h gbl-ctors.h
1272 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1273 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1274 -c
$(srcdir)/crtstuff.c
-DCRT_BEGIN
-o
$(T
)crtbegin
$(objext
)
1276 $(T
)crtend.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1277 defaults.h frame.h gbl-ctors.h
1278 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1279 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1280 -c
$(srcdir)/crtstuff.c
-DCRT_END
-o
$(T
)crtend
$(objext
)
1282 # On some systems we also want to install versions of these files
1283 # compiled using PIC for use in shared libraries.
1284 crtbeginS.o crtendS.o
: s-crtS
; @true
1286 s-crtS
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1287 defaults.h frame.h gbl-ctors.h
1288 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1289 -DCRT_BEGIN
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1290 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
1291 mv crtstuff
$(objext
) crtbeginS
$(objext
)
1292 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1293 -DCRT_END
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1294 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
-o crtendS
$(objext
)
1297 # Compile the start modules crt0.o and mcrt0.o that are linked with every program
1298 crt0.o
: s-crt0
; @true
1299 mcrt0.o
: s-crt0
; @true
1301 s-crt0
: $(CRT0_S
) $(MCRT0_S
) $(GCC_PASSES
) $(CONFIG_H
)
1302 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1303 -o crt0.o
-c
$(CRT0_S
)
1304 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1305 -o mcrt0.o
-c
$(MCRT0_S
)
1308 # Compiling object files from source files.
1310 # Note that dependencies on obstack.h are not written
1311 # because that file is not part of GCC.
1313 # C language specific files.
1315 c-parse.o
: $(srcdir)/c-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h \
1316 $(srcdir)/c-parse.h c-tree.h c-common.h input.h flags.h system.h toplev.h
1317 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/c-parse.c
1318 $(srcdir)/c-parse.h
: $(srcdir)/c-parse.c
1319 $(srcdir)/c-parse.c
: $(srcdir)/c-parse.y
1320 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d
-o c-parse.c c-parse.y
1321 $(srcdir)/c-parse.y
: c-parse.in
1322 echo
'/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1323 sed
-e
"/^ifobjc$$/,/^end ifobjc$$/d" \
1324 -e
"/^ifc$$/d" -e
"/^end ifc$$/d" \
1325 $(srcdir)/c-parse.in
>>tmp-c-parse.y
1326 $(srcdir)/move-if-change tmp-c-parse.y
$(srcdir)/c-parse.y
1328 $(srcdir)/c-gperf.h
: c-parse.gperf
1329 gperf
-L C
-F
', 0, 0' -p
-j1
-i
1 -g
-o
-t
-G
-N is_reserved_word \
1330 -k1
,3,$$ $(srcdir)/c-parse.gperf
>tmp-gperf.h
1331 $(srcdir)/move-if-change tmp-gperf.h
$(srcdir)/c-gperf.h
1333 c-decl.o
: c-decl.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h \
1334 c-lex.h flags.h function.h output.h toplev.h defaults.h
1335 c-typeck.o
: c-typeck.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h \
1336 flags.h intl.h output.h
$(EXPR_H
) $(RTL_H
) toplev.h
1337 c-lang.o
: c-lang.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h \
1338 c-lex.h toplev.h output.h function.h
1339 c-lex.o
: c-lex.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-lex.h c-tree.h \
1340 c-common.h
$(srcdir)/c-parse.h
$(srcdir)/c-gperf.h c-pragma.h input.h \
1341 intl.h flags.h toplev.h output.h mbchar.h
1342 c-aux-info.o
: c-aux-info.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h \
1343 c-common.h flags.h toplev.h
1344 c-convert.o
: c-convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h
1345 c-pragma.o
: c-pragma.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) function.h \
1346 defaults.h c-pragma.h toplev.h
1347 c-iterate.o
: c-iterate.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-tree.h \
1348 c-common.h flags.h toplev.h
$(EXPR_H
)
1349 mbchar.o
: mbchar.c
$(CONFIG_H
) system.h mbchar.h
1350 graph.o
: graph.c
$(CONFIG_H
) system.h toplev.h flags.h output.h
$(RTL_H
) \
1351 function.h hard-reg-set.h
$(BASIC_BLOCK_H
)
1352 sbitmap.o
: sbitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
)
1354 COLLECT2_OBJS
= collect2.o tlink.o hash.o intl.o underscore.o version.o
1355 collect2
$(exeext
): $(COLLECT2_OBJS
) $(LIBDEPS
)
1356 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1357 -rm -f collect2
$(exeext
)
1358 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(COLLECT2_OBJS
) $(LIBS
)
1360 collect2.o
: collect2.c
$(CONFIG_H
) system.h gstab.h intl.h \
1361 $(srcdir)/..
/include/obstack.h
$(DEMANGLE_H
) collect2.h
1362 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1363 -DTARGET_MACHINE
=\"$(target_alias
)\" $(MAYBE_USE_COLLECT2
) \
1364 -c
`echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1366 tlink.o
: tlink.c
$(DEMANGLE_H
) hash.h
$(CONFIG_H
) system.h collect2.h
1367 hash.o
: hash.c hash.h system.h toplev.h
1369 vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
$(CONFIG_H
) system.h
1371 $(LN_S
) $(srcdir)/..
/libiberty
/vfprintf.c vfprintf.c
1372 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) vfprintf.c
1374 splay-tree.o
: $(srcdir)/..
/libiberty
/splay-tree.c \
1375 $(srcdir)/..
/include/splay-tree.h
$(srcdir)/..
/include/libiberty.h
1377 $(LN_S
) $(srcdir)/..
/libiberty
/splay-tree.c splay-tree.c
1378 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) splay-tree.c
1380 underscore.c
: s-under
; @true
1382 s-under
: $(GCC_PASSES
)
1383 echo
"int xxy_us_dummy;" >tmp-dum.c
1384 $(GCC_FOR_TARGET
) -S tmp-dum.c
1385 echo
'/*WARNING: This file is automatically generated!*/' >tmp-under.c
1386 if grep _xxy_us_dummy tmp-dum.s
> /dev
/null
; then \
1387 echo
"int prepends_underscore = 1;" >>tmp-under.c
; \
1389 echo
"int prepends_underscore = 0;" >>tmp-under.c
; \
1391 $(srcdir)/move-if-change tmp-under.c underscore.c
1392 -rm -f tmp-dum.c tmp-dum.s
1395 # A file used by all variants of C.
1397 c-common.o
: c-common.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h \
1398 c-common.h flags.h toplev.h output.h c-pragma.h
$(RTL_H
)
1400 # Language-independent files.
1403 -DSTANDARD_STARTFILE_PREFIX
=\"$(libdir)/\" \
1404 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc-lib
/\" \
1405 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
1406 -DDEFAULT_TARGET_MACHINE
=\"$(target_alias
)\" \
1407 -DTOOLDIR_BASE_PREFIX
=\"$(exec_prefix)/\"
1408 gcc.o
: gcc.c
$(CONFIG_H
) system.h intl.h multilib.h \
1409 Makefile
$(lang_specs_files
) prefix.h
1410 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1412 -c
`echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1414 gccspec.o
: gccspec.c
$(CONFIG_H
) system.h
1415 cppspec.o
: cppspec.c
$(CONFIG_H
) system.h
1417 tree-check.h
: s-check
; @true
1418 s-check
: gencheck
$(srcdir)/move-if-change
1419 .
/gencheck
> tmp-check.h
1420 $(srcdir)/move-if-change tmp-check.h tree-check.h
1423 gencheck
: gencheck.o
$(lang_tree_files
) $(HOST_LIBDEPS
)
1424 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1425 gencheck.o
$(HOST_LIBS
)
1427 gencheck.o
: gencheck.c tree.def
$(CONFIG_H
) hconfig.h system.h
1428 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1429 $(srcdir)/gencheck.c
1431 dumpvers
: dumpvers.c
1433 version.o
: version.c
1435 ggc-simple.o
: ggc-simple.c
$(CONFIG_H
) $(RTL_BASE_H
) $(TREE_H
) flags.h ggc.h
1437 ggc-none.o
: ggc-none.c
$(CONFIG_H
) $(RTL_BASE_H
) ggc.h
1439 ggc-callbacks.o
: ggc-callbacks.c
$(CONFIG_H
) $(RTL_BASE_H
) $(TREE_H
) ggc.h
1441 obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
$(CONFIG_H
)
1443 $(LN_S
) $(srcdir)/..
/libiberty
/obstack.c obstack.c
1444 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) obstack.c
1446 prefix.o
: prefix.c
$(CONFIG_H
) system.h Makefile
prefix.h
1447 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1448 -DPREFIX
=\"$(prefix)\" \
1449 -c
`echo $(srcdir)/prefix.c | sed 's,^\./,,'`
1451 convert.o
: convert.c
$(CONFIG_H
) $(TREE_H
) flags.h convert.h toplev.h
1453 tree.o
: tree.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h function.h toplev.h \
1455 print-tree.o
: print-tree.c
$(CONFIG_H
) system.h
$(TREE_H
)
1456 stor-layout.o
: stor-layout.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h \
1457 function.h
$(EXPR_H
) $(RTL_H
) toplev.h ggc.h
1458 fold-const.o
: fold-const.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h \
1460 toplev.o
: toplev.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) function.h \
1461 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1462 insn-codes.h insn-config.h intl.h
$(RECOG_H
) Makefile toplev.h dwarfout.h \
1463 dwarf2out.h sdbout.h dbxout.h
$(EXPR_H
) $(BASIC_BLOCK_H
) \
1464 $(lang_options_files
)
1465 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(MAYBE_USE_COLLECT2
) \
1466 -DTARGET_NAME
=\"$(target_alias
)\" \
1467 -c
`echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1469 rtl.o
: rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1471 print-rtl.o
: print-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h basic-block.h
1472 rtlanal.o
: rtlanal.c
$(CONFIG_H
) system.h
$(RTL_H
)
1473 errors.o
: errors.c
$(CONFIG_H
) system.h errors.h
1475 varasm.o
: varasm.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h \
1476 function.h defaults.h
$(EXPR_H
) hard-reg-set.h
$(REGS_H
) \
1477 xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h ggc.h
1478 function.o
: function.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1479 function.h insn-flags.h insn-codes.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1480 insn-config.h
$(RECOG_H
) output.h toplev.h except.h hash.h ggc.h
1481 stmt.o
: stmt.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1482 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h
$(EXPR_H
) except.h \
1483 loop.h
$(RECOG_H
) toplev.h output.h varray.h ggc.h
1484 except.o
: except.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1485 function.h insn-flags.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1486 insn-config.h
$(RECOG_H
) output.h except.h toplev.h intl.h ggc.h
1487 expr.o
: expr.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1488 $(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h
$(RECOG_H
) \
1489 output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h \
1491 builtins.o
: builtins.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1492 function.h
$(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h \
1493 $(RECOG_H
) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
1495 calls.o
: calls.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h
$(EXPR_H
) \
1496 insn-flags.h
$(REGS_H
) toplev.h output.h
1497 expmed.o
: expmed.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1498 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) real.h toplev.h
1499 explow.o
: explow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1500 hard-reg-set.h insn-config.h
$(EXPR_H
) $(RECOG_H
) insn-flags.h \
1501 insn-codes.h toplev.h
1502 optabs.o
: optabs.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1503 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) reload.h \
1505 dbxout.o
: dbxout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h
$(REGS_H
) \
1506 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
1508 sdbout.o
: sdbout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h except.h \
1509 function.h
$(EXPR_H
) output.h hard-reg-set.h
$(REGS_H
) defaults.h real.h \
1510 insn-config.h
$(srcdir)/..
/include/obstack.h xcoffout.h c-pragma.h \
1512 dwarfout.o
: dwarfout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf.h \
1513 flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
1514 dwarf2out.o
: dwarf2out.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf2.h \
1515 flags.h insn-config.h reload.h output.h defaults.h \
1516 hard-reg-set.h
$(REGS_H
) $(EXPR_H
) toplev.h dwarf2out.h dyn-string.h
1517 xcoffout.o
: xcoffout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) xcoffout.h \
1518 flags.h toplev.h output.h dbxout.h
1519 emit-rtl.o
: emit-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1520 function.h
$(REGS_H
) insn-config.h
$(RECOG_H
) real.h ggc.h \
1521 $(EXPR_H
) $(srcdir)/..
/include/obstack.h hard-reg-set.h bitmap.h toplev.h
1522 real.o
: real.c
$(CONFIG_H
) system.h
$(TREE_H
) toplev.h
1524 integrate.o
: integrate.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1525 integrate.h insn-flags.h insn-config.h
$(EXPR_H
) real.h
$(REGS_H
) \
1526 intl.h function.h output.h
$(RECOG_H
) except.h toplev.h
1528 jump.o
: jump.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h
$(REGS_H
) \
1529 insn-config.h insn-flags.h
$(RECOG_H
) $(EXPR_H
) real.h except.h function.h \
1530 toplev.h insn-attr.h
1531 stupid.o
: stupid.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1532 $(BASIC_BLOCK_H
) insn-config.h reload.h flags.h function.h toplev.h
1534 cse.o
: cse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1535 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) toplev.h output.h function.h \
1536 $(srcdir)/..
/include/splay-tree.h
1537 gcse.o
: gcse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1538 flags.h real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
) \
1539 function.h output.h toplev.h
1540 resource.o
: resource.c
$(CONFIG_H
) $(RTL_H
) hard-reg-set.h system.h \
1541 $(BASIC_BLOCK_H
) $(REGS_H
) flags.h output.h resource.h function.h toplev.h
1542 lcm.o
: lcm.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1543 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
)
1544 profile.o
: profile.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-flags.h \
1545 gcov-io.h
$(TREE_H
) output.h
$(REGS_H
) toplev.h function.h insn-config.h \
1547 loop.o
: loop.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h loop.h insn-config.h \
1548 insn-flags.h
$(REGS_H
) hard-reg-set.h
$(RECOG_H
) $(EXPR_H
) real.h \
1549 function.h toplev.h varray.h
1550 unroll.o
: unroll.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h function.h \
1551 integrate.h
$(REGS_H
) $(RECOG_H
) flags.h
$(EXPR_H
) loop.h toplev.h varray.h
1552 flow.o
: flow.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-config.h \
1553 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h output.h toplev.h recog.h \
1554 insn-flags.h function.h
1555 combine.o
: combine.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h function.h \
1556 insn-config.h insn-flags.h insn-codes.h insn-attr.h
$(REGS_H
) $(EXPR_H
) \
1557 $(BASIC_BLOCK_H
) $(RECOG_H
) real.h hard-reg-set.h toplev.h
1558 regclass.o
: regclass.c
$(CONFIG_H
) system.h
$(RTL_H
) hard-reg-set.h flags.h \
1559 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h
$(RECOG_H
) reload.h real.h \
1560 toplev.h function.h output.h
1561 local-alloc.o
: local-alloc.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1562 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h
$(RECOG_H
) \
1563 output.h function.h insn-attr.h toplev.h
1564 bitmap.o
: bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
) \
1566 global.o
: global.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h reload.h function.h \
1567 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h output.h toplev.h
1568 varray.o
: varray.c
$(CONFIG_H
) system.h varray.h
$(RTL_H
) $(TREE_H
) bitmap.h
1570 reload.o
: reload.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h output.h
$(EXPR_H
) \
1571 reload.h
$(RECOG_H
) hard-reg-set.h insn-config.h insn-codes.h
$(REGS_H
) \
1572 function.h real.h toplev.h
1573 reload1.o
: reload1.c
$(CONFIG_H
) system.h
$(RTL_H
) real.h flags.h
$(EXPR_H
) \
1574 reload.h
$(REGS_H
) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1575 $(BASIC_BLOCK_H
) $(RECOG_H
) output.h function.h toplev.h
1576 caller-save.o
: caller-save.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1577 $(REGS_H
) hard-reg-set.h insn-config.h
$(BASIC_BLOCK_H
) function.h \
1578 $(RECOG_H
) reload.h
$(EXPR_H
) toplev.h
1579 reorg.o
: reorg.c
$(CONFIG_H
) system.h
$(RTL_H
) conditions.h hard-reg-set.h \
1580 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h insn-attr.h insn-flags.h \
1581 $(RECOG_H
) function.h flags.h output.h
$(EXPR_H
) toplev.h
1582 alias.o
: alias.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h \
1583 $(REGS_H
) toplev.h output.h
$(EXPR_H
)
1584 regmove.o
: regmove.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1585 $(RECOG_H
) output.h reload.h
$(REGS_H
) hard-reg-set.h flags.h function.h \
1586 $(EXPR_H
) insn-flags.h
$(BASIC_BLOCK_H
) toplev.h
1587 haifa-sched.o
: haifa-sched.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1588 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h flags.h insn-config.h function.h \
1589 insn-attr.h toplev.h recog.h
1590 final.o
: final.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h intl.h \
1591 $(REGS_H
) $(RECOG_H
) conditions.h insn-config.h insn-attr.h function.h \
1592 real.h output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h except.h \
1593 xcoffout.h defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
1595 recog.o
: recog.c
$(CONFIG_H
) system.h
$(RTL_H
) function.h \
1596 $(REGS_H
) $(RECOG_H
) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1597 insn-flags.h insn-codes.h real.h toplev.h output.h resource.h
1598 reg-stack.o
: reg-stack.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) recog.h \
1599 $(REGS_H
) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h \
1601 dyn-string.o
: dyn-string.c dyn-string.h
$(CONFIG_H
) system.h
1602 lists.o
: lists.c
$(CONFIG_H
) system.h toplev.h
$(RTL_H
)
1604 $(out_object_file
): $(out_file
) $(CONFIG_H
) $(TREE_H
) \
1605 $(RTL_H
) $(REGS_H
) hard-reg-set.h real.h insn-config.h conditions.h \
1606 insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h function.h
1607 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(out_file
)
1609 # Build auxiliary files that support ecoff format.
1610 mips-tfile
: mips-tfile.o version.o
$(LIBDEPS
)
1611 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tfile.o version.o
$(LIBS
)
1613 mips-tfile.o
: mips-tfile.c
$(CONFIG_H
) $(RTL_H
) system.h machmode.h
1615 mips-tdump
: mips-tdump.o version.o
$(LIBDEPS
)
1616 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tdump.o version.o
$(LIBS
)
1618 mips-tdump.o
: mips-tdump.c
$(CONFIG_H
) $(RTL_H
) system.h
1620 # Build file to support OSF/rose half-pic format.
1621 halfpic.o
: halfpic.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) system.h
1623 # Normally this target is not used; but it is used if you
1624 # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1625 # from the GNU Emacs distribution.
1626 alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1628 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c alloca.c
1629 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(ALLOCA_FLAGS
) \
1630 -c
`echo alloca.c | sed 's,^\./,,'`
1633 # Generate header and source files from the machine description,
1636 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h \
1637 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1638 insn-attr.h insn-attrtab.c
1640 # The following pair of rules has this effect:
1641 # genconfig is run only if the md has changed since genconfig was last run;
1642 # but the file insn-config.h is touched only when its contents actually change.
1644 # Each of the other insn-* files is handled by a similar pair of rules.
1646 # This causes an anomaly in the results of make -n
1647 # because insn-* is older than s-*
1648 # and thus make -n thinks that insn-* will be updated
1649 # and force recompilation of things that depend on it.
1650 # We use move-if-change precisely to avoid such recompilation.
1651 # But there is no way to teach make -n that it will be avoided.
1653 # Each of the insn-*.[ch] rules has a semicolon at the end,
1654 # for otherwise the system Make on SunOS 4.1 never tries
1655 # to recompile insn-*.o. To avoid problems and extra noise from
1656 # versions of make which don't like empty commands (nothing after the
1657 # trailing `;'), we call true for each.
1659 insn-config.h
: s-config
; @true
1660 s-config
: $(md_file
) genconfig
$(srcdir)/move-if-change
1661 .
/genconfig
$(md_file
) > tmp-config.h
1662 $(srcdir)/move-if-change tmp-config.h insn-config.h
1665 insn-flags.h
: s-flags
; @true
1666 s-flags
: $(md_file
) genflags
$(srcdir)/move-if-change
1667 .
/genflags
$(md_file
) > tmp-flags.h
1668 $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1671 insn-codes.h
: s-codes
; @true
1672 s-codes
: $(md_file
) gencodes
$(srcdir)/move-if-change
1673 .
/gencodes
$(md_file
) > tmp-codes.h
1674 $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1677 insn-emit.o
: insn-emit.c
$(CONFIG_H
) $(RTL_H
) $(EXPR_H
) real.h output.h \
1678 insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h function.h
1679 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-emit.c
1681 insn-emit.c
: s-emit
; @true
1682 s-emit
: $(md_file
) genemit
$(srcdir)/move-if-change
1683 .
/genemit
$(md_file
) > tmp-emit.c
1684 $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1687 insn-recog.o
: insn-recog.c
$(CONFIG_H
) $(RTL_H
) insn-config.h
$(RECOG_H
) \
1688 real.h output.h flags.h system.h function.h
1689 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-recog.c
1691 insn-recog.c
: s-recog
; @true
1692 s-recog
: $(md_file
) genrecog
$(srcdir)/move-if-change
1693 .
/genrecog
$(md_file
) > tmp-recog.c
1694 $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1697 insn-opinit.o
: insn-opinit.c
$(CONFIG_H
) $(RTL_H
) insn-codes.h insn-flags.h \
1698 insn-config.h flags.h
$(RECOG_H
) $(EXPR_H
) reload.h system.h
1699 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-opinit.c
1701 insn-opinit.c
: s-opinit
; @true
1702 s-opinit
: $(md_file
) genopinit
$(srcdir)/move-if-change
1703 .
/genopinit
$(md_file
) > tmp-opinit.c
1704 $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1707 insn-extract.o
: insn-extract.c
$(CONFIG_H
) $(RTL_H
) system.h toplev.h \
1708 insn-config.h recog.h
1709 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-extract.c
1711 insn-extract.c
: s-extract
; @true
1712 s-extract
: $(md_file
) genextract
$(srcdir)/move-if-change
1713 .
/genextract
$(md_file
) > tmp-extract.c
1714 $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1717 insn-peep.o
: insn-peep.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) output.h real.h \
1718 system.h insn-config.h recog.h
1719 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-peep.c
1721 insn-peep.c
: s-peep
; @true
1722 s-peep
: $(md_file
) genpeep
$(srcdir)/move-if-change
1723 .
/genpeep
$(md_file
) > tmp-peep.c
1724 $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1727 insn-attrtab.o
: insn-attrtab.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h \
1728 output.h insn-attr.h insn-config.h system.h toplev.h
1729 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-attrtab.c
1731 insn-attr.h
: s-attr
; @true
1732 s-attr
: $(md_file
) genattr
$(srcdir)/move-if-change
1733 .
/genattr
$(md_file
) > tmp-attr.h
1734 $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1737 insn-attrtab.c
: s-attrtab
; @true
1738 s-attrtab
: $(md_file
) genattrtab
$(srcdir)/move-if-change
1739 .
/genattrtab
$(md_file
) > tmp-attrtab.c
1740 $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1743 insn-output.o
: insn-output.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h conditions.h \
1744 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h
$(RECOG_H
) \
1745 function.h insn-codes.h system.h
1746 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-output.c
1748 insn-output.c
: s-output
; @true
1749 s-output
: $(md_file
) genoutput
$(srcdir)/move-if-change
1750 .
/genoutput
$(md_file
) > tmp-output.c
1751 $(srcdir)/move-if-change tmp-output.c insn-output.c
1754 genrtl.o
: genrtl.c
$(CONFIG_H
) $(RTL_H
) system.h
1755 genrtl.c genrtl.h
: s-genrtl
1756 @true
# force gnu make to recheck modification times.
1758 s-genrtl
: gengenrtl
$(srcdir)/move-if-change
$(RTL_BASE_H
)
1759 .
/gengenrtl tmp-genrtl.h tmp-genrtl.c
1760 $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
1761 $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
1765 # Compile the programs that generate insn-* from the machine description.
1766 # They are compiled with $(HOST_CC), and associated libraries,
1767 # since they need to run on this machine
1768 # even if GCC is being compiled to run on some other machine.
1770 # $(CONFIG_H) is omitted from the deps of the gen*.o
1771 # because these programs don't really depend on anything
1772 # about the target machine. They do depend on config.h itself,
1773 # since that describes the host machine.
1775 # Pass the md file through cpp if the target requests it.
1776 $(MD_FILE
): $(MD_DEPS
)
1778 $(MD_CPP
) $(MD_CPPFLAGS
) $(md_file
) | sed
's/^# /; /g' > tmp-
$@
1781 genconfig
: genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1782 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1783 genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1785 genconfig.o
: genconfig.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1786 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genconfig.c
1788 genflags
: genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1789 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1790 genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1792 genflags.o
: genflags.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1793 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genflags.c
1795 gencodes
: gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1796 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1797 gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1799 gencodes.o
: gencodes.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1800 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencodes.c
1802 genemit
: genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1803 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1804 genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1806 genemit.o
: genemit.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1807 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genemit.c
1809 genopinit
: genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1810 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1811 genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1813 genopinit.o
: genopinit.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1814 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genopinit.c
1816 genrecog
: genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1817 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1818 genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1820 genrecog.o
: genrecog.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1821 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genrecog.c
1823 genextract
: genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1824 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1825 genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1827 genextract.o
: genextract.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h errors.h
1828 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genextract.c
1830 genpeep
: genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1831 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1832 genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1834 genpeep.o
: genpeep.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1835 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genpeep.c
1837 genattr
: genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1838 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1839 genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1841 genattr.o
: genattr.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1842 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattr.c
1844 genattrtab
: genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_RTLANAL
) $(HOST_LIBDEPS
)
1845 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1846 genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_RTLANAL
) $(HOST_LIBS
)
1848 genattrtab.o
: genattrtab.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h errors.h
1849 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattrtab.c
1851 genoutput
: genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1852 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1853 genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1855 genoutput.o
: genoutput.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1856 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genoutput.c
1858 gengenrtl
: gengenrtl.o
$(HOST_LIBDEPS
)
1859 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1860 gengenrtl.o
$(HOST_LIBS
)
1862 gengenrtl.o
: gengenrtl.c
$(RTL_BASE_H
) system.h
1863 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gengenrtl.c
1866 # Compile the libraries to be used by gen*.
1867 # If we are not cross-building, gen* use the same .o's that cc1 will use,
1868 # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1869 # with the rules for rtl.o, alloca.o, etc.
1870 $(HOST_PREFIX_1
)rtl.o
: $(srcdir)/rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1871 rm -f
$(HOST_PREFIX
)rtl.c
1872 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtl.c
> $(HOST_PREFIX
)rtl.c
1873 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtl.c
1875 $(HOST_PREFIX_1
)print-rtl.o
: $(srcdir)/print-rtl.c
$(CONFIG_H
) $(RTL_H
) \
1876 bitmap.h basic-block.h
1877 rm -f
$(HOST_PREFIX
)print-rtl.c
1878 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c
> $(HOST_PREFIX
)print-rtl.c
1879 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)print-rtl.c
1881 $(HOST_PREFIX_1
)bitmap.o
: $(srcdir)/bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1882 flags.h
$(BASIC_BLOCK_H
) $(REGS_H
)
1883 rm -f
$(HOST_PREFIX
)bitmap.c
1884 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c
> $(HOST_PREFIX
)bitmap.c
1885 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)bitmap.c
1887 $(HOST_PREFIX_1
)rtlanal.o
: $(srcdir)/rtlanal.c
$(CONFIG_H
) $(RTL_H
)
1888 rm -f
$(HOST_PREFIX
)rtlanal.c
1889 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c
> $(HOST_PREFIX
)rtlanal.c
1890 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtlanal.c
1892 $(HOST_PREFIX_1
)alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1893 rm -f
$(HOST_PREFIX
)alloca.c
1894 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c
$(HOST_PREFIX
)alloca.c
1895 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)alloca.c
1897 $(HOST_PREFIX_1
)obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
1898 rm -f
$(HOST_PREFIX
)obstack.c
1899 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/obstack.c
> $(HOST_PREFIX
)obstack.c
1900 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)obstack.c
1902 $(HOST_PREFIX_1
)vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
1903 rm -f
$(HOST_PREFIX
)vfprintf.c
1904 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/vfprintf.c
> $(HOST_PREFIX
)vfprintf.c
1905 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)vfprintf.c
1907 $(HOST_PREFIX_1
)doprint.o
: doprint.c
1908 rm -f
$(HOST_PREFIX
)doprint.c
1909 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/doprint.c
> $(HOST_PREFIX
)doprint.c
1910 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)doprint.c
1912 $(HOST_PREFIX_1
)malloc.o
: malloc.c
1913 rm -f
$(HOST_PREFIX
)malloc.c
1914 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/malloc.c
> $(HOST_PREFIX
)malloc.c
1915 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)malloc.c
1917 $(HOST_PREFIX_1
)errors.o
: errors.c
1918 rm -f
$(HOST_PREFIX
)errors.c
1919 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/errors.c
> $(HOST_PREFIX
)errors.c
1920 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)errors.c
1923 # This satisfies the dependency that we get if you cross-compile a compiler
1924 # that does not need to compile alloca, malloc or whatever.
1926 touch
$(HOST_PREFIX_1
)
1930 # Remake internationalization support.
1932 intl.o
: intl.c intl.h gansidecl.h Makefile
1933 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1934 -DLOCALEDIR
=\"$(localedir
)\" \
1935 -c
`echo $(srcdir)/intl.c | sed 's,^\./,,'`
1937 # This is needed to when doing a partial build after a `make clean'.
1938 # libintl.a does not depend on intl.all,
1939 # as that would force a lot of recompiling.
1940 $(top_builddir
)/intl
/libintl.a
:
1941 @echo
"$(MAKE) intl.all"
1942 @
$(MAKE
) $(FLAGS_TO_PASS
) intl.
all
1944 # Make sure all the headers are there for xgettext to scan.
1945 $(INTL_TARGETS
): $(srcdir)/c-gperf.h \
1946 $(srcdir)/c-parse.c
$(srcdir)/c-parse.h
$(srcdir)/cexp.c
1948 intl.
all intl.
install intl.
uninstall intl.distdir \
1949 intl.
mostlyclean intl.
clean intl.
distclean intl.maintainer-clean
:
1950 @for d in
$(INTL_SUBDIRS
); do \
1951 target
=`expr $@ : 'intl.\(.*\)'` && \
1952 echo
"(cd $$d && $(MAKE) $$target)" && \
1953 (cd
$$d && AWK
='$(AWK)' $(MAKE
) $(SUBDIR_FLAGS_TO_PASS
) $$target); \
1956 # intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
1957 # but we need them for the `make extraclean' in distdir-finish.
1959 for d in
$(INTL_SUBDIRS
); do \
1960 ln
$$d/Makefile tmp
/$$d || cp
$$d/Makefile tmp
/$$d || exit
; \
1963 # Remake cpp and protoize.
1965 # Making the preprocessor
1966 cpp$(exeext
): $(CCCP
)$(exeext
)
1968 $(LN
) $(CCCP
)$(exeext
) cpp$(exeext
)
1969 CCCP_OBJS
= cccp.o cexp.o intl.o
prefix.o version.o @extra_cpp_objs@ mbchar.o
1970 cccp
$(exeext
): $(CCCP_OBJS
) $(LIBDEPS
)
1971 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(CCCP_OBJS
) $(LIBS
)
1972 cexp.o
: $(srcdir)/cexp.c
$(CONFIG_H
) system.h
1973 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/cexp.c
1974 $(srcdir)/cexp.c
: $(srcdir)/cexp.y
1975 cd
$(srcdir); $(BISON
) -o cexp.c cexp.y
1977 PREPROCESSOR_DEFINES
= \
1978 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1979 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
1980 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1981 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
1982 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\"
1983 # We use $(libsubdir)/$(unlibsubdir) to match the
1984 # -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
1985 cccp.o
: cccp.c
$(CONFIG_H
) intl.h pcp.h version.c config.status system.h \
1986 mbchar.h
prefix.h Makefile.in
1987 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1988 $(PREPROCESSOR_DEFINES
) \
1989 -c
`echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1991 LIBCPP_OBJS
= cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o cppfiles.o \
1992 cppinit.o cppulp.o
prefix.o version.o mbchar.o @extra_cpp_objs@
1994 # All the other archives built/used by this makefile are for targets. This
1995 # one is strictly for the host.
1997 libcpp.a
: $(LIBCPP_OBJS
)
1998 $(AR
) $(AR_FLAGS
) libcpp.a
$(LIBCPP_OBJS
)
1999 if
$(RANLIB_TEST
) ; then
$(RANLIB
) libcpp.a
; else true
; fi
2001 cppmain
$(exeext
): cppmain.o intl.o libcpp.a
$(LIBDEPS
)
2002 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o cppmain
$(exeext
) cppmain.o \
2003 intl.o libcpp.a
$(LIBS
)
2005 cppmain.o
: cppmain.c
$(CONFIG_H
) cpplib.h intl.h system.h
2007 cppulp.o
: cppulp.c
$(CONFIG_H
) system.h output.h
2008 cpplib.o
: cpplib.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
2009 cpphash.o
: cpphash.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
2010 cppalloc.o
: cppalloc.c
$(CONFIG_H
) cpplib.h intl.h system.h
2011 cpperror.o
: cpperror.c
$(CONFIG_H
) cpplib.h intl.h system.h
2012 cppexp.o
: cppexp.c
$(CONFIG_H
) cpplib.h intl.h system.h
2013 cppfiles.o
: cppfiles.c
$(CONFIG_H
) cpplib.h intl.h system.h
2015 cppinit.o
: cppinit.c
$(CONFIG_H
) cpplib.h intl.h system.h \
2016 cpphash.h
prefix.h output.h Makefile
2017 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2018 $(PREPROCESSOR_DEFINES
) \
2019 -c
`echo $(srcdir)/cppinit.c | sed 's,^\./,,'`
2021 # Note for the stamp targets, we run the program `true' instead of
2022 # having an empty command (nothing following the semicolon).
2024 proto
: config.status protoize
$(exeext
) unprotoize
$(exeext
) SYSCALLS.c.X
2026 PROTO_OBJS
= intl.o version.o
2028 protoize
$(exeext
): protoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2029 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ protoize.o
$(PROTO_OBJS
) $(LIBS
)
2031 unprotoize
$(exeext
): unprotoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2032 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ unprotoize.o
$(PROTO_OBJS
) $(LIBS
)
2034 protoize.o
: protoize.c
$(srcdir)/..
/include/getopt.h
$(CONFIG_H
) system.h \
2036 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2037 $(DRIVER_DEFINES
) $(PREPROCESSOR_DEFINES
) \
2038 $(srcdir)/protoize.c
2040 unprotoize.o
: unprotoize.c protoize.c
$(srcdir)/..
/include/getopt.h \
2041 $(CONFIG_H
) system.h Makefile
2042 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2043 $(DRIVER_DEFINES
) $(PREPROCESSOR_DEFINES
) \
2044 $(srcdir)/unprotoize.c
2046 # This info describes the target machine, so compile with GCC just built.
2047 SYSCALLS.c.X
: $(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
$(GCC_PASSES
) \
2049 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2050 cat
$(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
> SYSCALLS.c
2051 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2052 -aux-info
$@
-S
-o tmp-SYSCALLS.s SYSCALLS.c
2053 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2056 test-protoize-simple
: .
/protoize .
/unprotoize
$(GCC_PASSES
)
2057 -rm -f tmp-proto.
[cso
]
2058 cp
$(srcdir)/protoize.c tmp-proto.c
2059 chmod u
+w tmp-proto.c
2060 .
/protoize
-N
-B .
/ -x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2061 $(GCC_CFLAGS) $(INCLUDES) \
2062 -DGCC_INCLUDE_DIR=0 \
2063 -DGPLUSPLUS_INCLUDE_DIR=0 \
2064 -DCROSS_INCLUDE_DIR=0 \
2065 -DTOOL_INCLUDE_DIR=0 \
2066 -DSTANDARD_EXEC_PREFIX=0 \
2067 -DDEFAULT_TARGET_MACHINE=0 \
2068 -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
2069 @echo
'**********' Expect
400 lines of differences.
2070 -diff
$(srcdir)/protoize.c tmp-proto.c
> tmp-proto.diff
2071 -wc
-l tmp-proto.diff
2072 .
/unprotoize
-N
-x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2073 $(GCC_CFLAGS) $(INCLUDES) \
2074 -DGCC_INCLUDE_DIR=0 \
2075 -DGPLUSPLUS_INCLUDE_DIR=0 \
2076 -DCROSS_INCLUDE_DIR=0 \
2077 -DTOOL_INCLUDE_DIR=0 \
2078 -DSTANDARD_EXEC_PREFIX=0 \
2079 -DDEFAULT_TARGET_MACHINE=0 \
2080 -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
2081 @echo Expect zero differences.
2082 diff
$(srcdir)/protoize.c tmp-proto.c | cat
2083 -rm -f tmp-proto.
[cs
] tmp-proto
$(objext
)
2085 gcov.o
: gcov.c gcov-io.h intl.h system.h
2087 # Only one of 'gcov' or 'gcov.exe' is actually built, depending
2088 # upon whether $(exeext) is empty or not.
2089 GCOV_OBJS
= gcov.o intl.o
2090 gcov
$(exeext
): $(GCOV_OBJS
) $(LIBDEPS
)
2091 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) $(GCOV_OBJS
) $(LIBS
) -o
$@
2093 # Build the include directory. The stamp files are stmp-* rather than
2094 # s-* so that mostlyclean does not force the include directory to
2097 # Build the include directory including float.h (which no longer depends upon
2099 stmp-int-hdrs
: stmp-fixinc
$(USER_H
) xlimits.h
2100 # Copy in the headers provided with gcc.
2101 # The sed command gets just the last file name component;
2102 # this is necessary because VPATH could add a dirname.
2103 # Using basename would be simpler, but some systems don't have it.
2104 # The touch command is here to workaround an AIX/Linux NFS bug.
2105 for file in ..
$(USER_H
); do \
2106 if
[ X
$$file != X..
]; then \
2107 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2108 touch
include/$$realfile; \
2109 rm -f
include/$$realfile; \
2110 cp
$$file include; \
2111 chmod a
+r
include/$$realfile; \
2114 rm -f
include/limits.h
2115 cp xlimits.h
include/limits.h
2116 chmod a
+r
include/limits.h
2117 rm -f
include/float.h
2118 if
[ x
$(FLOAT_H
) != xMakefile.in
]; then \
2119 cp
$(srcdir)/config
/$(FLOAT_H
) include/float.h
&& \
2120 chmod a
+r
include/float.h
; \
2122 # Install the README
2123 rm -f
include/README
2124 cp
$(srcdir)/README-fixinc
include/README
2125 chmod a
+r
include/README
2128 # Now that float.h no longer depends upon enquire, this is actually a no-op.
2132 FIXINCSRCDIR
=$(srcdir)/fixinc
2133 fixinc.sh
: $(FIXINCSRCDIR
)/mkfixinc.sh
$(FIXINCSRCDIR
)/fixincl.c \
2134 $(FIXINCSRCDIR
)/procopen.c
$(FIXINCSRCDIR
)/gnu-regex.c \
2135 $(FIXINCSRCDIR
)/server.c
$(FIXINCSRCDIR
)/gnu-regex.h \
2136 $(FIXINCSRCDIR
)/server.h
$(FIXINCSRCDIR
)/inclhack.def
2137 MAKE
="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
2138 export MAKE
srcdir ; \
2139 cd .
/fixinc
; $(SHELL
) $${srcdir}/mkfixinc.sh
$(target
)
2141 ##stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
2144 ## if [ x$(FIXINCLUDES) != xMakefile.in ]; \
2146 ## for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
2147 ## if [ -d $$dir ]; \
2149 ## $(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
2152 ## if [ x$(INSTALL_ASSERT_H) != x ] ; \
2154 ## rm -f include/assert.h; \
2155 ## cp $(srcdir)/assert.h include/assert.h; \
2156 ## chmod a+r include/assert.h; \
2161 # Build fixed copies of system files.
2162 stmp-fixinc
: fixinc.sh gsyslimits.h
2163 rm -rf
include; mkdir
include
2164 TARGET_MACHINE
=$(target
); srcdir=`cd $(srcdir); pwd`; \
2165 INSTALL_ASSERT_H
=$(INSTALL_ASSERT_H
); SHELL
=$(SHELL
) ;\
2166 export TARGET_MACHINE
srcdir INSTALL_ASSERT_H SHELL
; \
2167 $(SHELL
) .
/fixinc.sh
`pwd`/include $(SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
)
2168 rm -f
include/syslimits.h
2169 if
[ -f
include/limits.h
]; then \
2170 mv
include/limits.h
include/syslimits.h
; \
2172 cp
$(srcdir)/gsyslimits.h
include/syslimits.h
; \
2174 chmod a
+r
include/syslimits.h
2175 # If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and
2176 # that directory exists, then make sure that $(libsubdir) exists.
2177 # This is because cpp is compiled to find $(tooldir)/include via
2178 # $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
2180 # We deliberately use tooldir instead of gcc_tooldir here. gcc_tooldir
2181 # won't work because libsubdir doesn't exist yet.
2182 if
[ "$(SYSTEM_HEADER_DIR)" = "$(tooldir)/sys-include" ] \
2183 && [ -d
$(tooldir
)/sys-include
]; then \
2184 if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; fi
; \
2185 if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; fi
; \
2186 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
) ; fi
; \
2187 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; fi
; \
2192 # Files related to the fixproto script.
2194 deduced.h
: $(GCC_PASSES
) $(srcdir)/scan-types.sh stmp-int-hdrs
2195 if
[ -d
$(SYSTEM_HEADER_DIR
) ]; \
2197 CC
="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
2199 $(SHELL
) $(srcdir)/scan-types.sh
"$(srcdir)" >tmp-deduced.h
; \
2200 mv tmp-deduced.h deduced.h
; \
2205 GEN_PROTOS_OBJS
= gen-protos.o scan.o libcpp.a
2206 gen-protos
: $(GEN_PROTOS_OBJS
) $(HOST_LIBDEPS
)
2207 ${HOST_CC} $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o gen-protos \
2208 $(GEN_PROTOS_OBJS
) $(HOST_LIBS
)
2210 gen-protos.o
: gen-protos.c scan.h
$(build_xm_file
) system.h
2211 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gen-protos.c
2213 scan.o
: scan.c scan.h
$(build_xm_file
) system.h
2214 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan.c
2216 xsys-protos.h
: $(GCC_PASSES
) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
2217 cat deduced.h
$(srcdir)/sys-protos.h
> tmp-fixtmp.c
2218 mv tmp-fixtmp.c fixtmp.c
2219 $(GCC_FOR_TARGET
) fixtmp.c
-w
-U__SIZE_TYPE__
-U__PTRDIFF_TYPE__
-U__WCHAR_TYPE__
-E \
2220 | sed
-e
's/ / /g' -e
's/ *(/ (/g' -e
's/ [ ]*/ /g' -e
's/( )/()/' \
2221 | .
/gen-protos
>xsys-protos.hT
2222 mv xsys-protos.hT xsys-protos.h
2225 fix-header
: fix-header.o scan-decls.o scan.o xsys-protos.h
$(HOST_LIBDEPS
) \
2227 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ fix-header.o \
2228 scan-decls.o scan.o libcpp.a
$(HOST_LIBS
)
2230 fix-header.o
: fix-header.c
$(srcdir)/..
/include/obstack.h scan.h \
2231 xsys-protos.h
$(build_xm_file
) system.h cpplib.h cpphash.h
2232 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/fix-header.c
2234 scan-decls.o
: scan-decls.c scan.h cpplib.h
$(build_xm_file
) system.h
2235 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan-decls.c
2237 # stmp-fixproto depends on this, not on fix-header directly.
2238 # The idea is to make sure fix-header gets built,
2239 # but not rerun fixproto after each stage
2240 # just because fix-header's mtime has changed.
2241 fixhdr.ready
: fix-header
2242 -if
[ -f fixhdr.ready
] ; then \
2245 touch fixhdr.ready
; \
2248 # stmp-headers is to make sure fixincludes has already finished.
2249 # The if statement is so that we don't run fixproto a second time
2250 # if it has already been run on the files in `include'.
2251 stmp-fixproto
: fixhdr.ready fixproto stmp-headers
2252 @echo
"Various warnings and error messages from fixproto are normal"
2253 -if
[ -d
include ] ; then true
; else mkdir
include; fi
2254 -if
[ -f
include/fixed
] ; then true
; \
2256 : This line works around a
'make' bug in BSDI
1.1.
; \
2257 FIXPROTO_DEFINES
="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES
; \
2258 mkinstalldirs
="$(SHELL) $(srcdir)/mkinstalldirs"; \
2259 export mkinstalldirs
; \
2260 if
[ -d
$(SYSTEM_HEADER_DIR
) ] ; then \
2261 $(SHELL
) ${srcdir}/fixproto
include include $(SYSTEM_HEADER_DIR
); \
2263 touch
include/fixed
; \
2267 # Remake the info files.
2270 info: cpp.
info gcc.
info lang.
info
2272 cpp.
info: $(srcdir)/cpp.texi
2273 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o
cpp.
info $(srcdir)/cpp.texi
2275 gcc.
info: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2276 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2277 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2278 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o gcc.
info $(srcdir)/gcc.texi
2280 dvi: gcc.
dvi cpp.
dvi lang.
dvi
2282 # This works with GNU Make's default rule.
2283 gcc.
dvi: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2284 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2285 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2286 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2288 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2290 cpp.
dvi: $(srcdir)/cpp.texi
2291 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2293 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2296 INSTALL
: $(srcdir)/install1.texi
$(srcdir)/install.texi
2297 cd
$(srcdir); $(MAKEINFO
) -D INSTALLONLY \
2298 --no-split
-o INSTALL install1.texi
2300 # Deletion of files made during compilation.
2301 # There are four levels of this:
2302 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2303 # `mostlyclean' is useful while working on a particular type of machine.
2304 # It deletes most, but not all, of the files made by compilation.
2305 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2306 # `clean' deletes everything made by running `make all'.
2307 # `distclean' also deletes the files made by config.
2308 # `maintainer-clean' also deletes everything that could be regenerated
2309 # automatically, except for `configure'.
2310 # We remove as much from the language subdirectories as we can
2311 # (less duplicated code).
2314 mostlyclean: intl.
mostlyclean lang.
mostlyclean
2315 -rm -f
$(STAGESTUFF
)
2316 # Delete the temporary source copies for cross compilation.
2317 -rm -f
$(HOST_PREFIX_1
)rtl.c
$(HOST_PREFIX_1
)rtlanal.c
2318 -rm -f
$(HOST_PREFIX_1
)alloca.c
$(HOST_PREFIX_1
)malloc.c
2319 -rm -f
$(HOST_PREFIX_1
)obstack.c
2320 # Delete the temp files made in the course of building libgcc.a.
2321 -rm -f tmplibgcc
* tmpcopy xlimits.h libgcc1-test
2322 for name in
$(LIB1FUNCS
); do
rm -f
$${name}.c
; done
2323 # Delete other built files.
2324 -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
2325 # Delete the stamp and temporary files.
2326 -rm -f s-
* tmp-
* stamp-
* stmp-
*
2327 -rm -f
*/stamp-
* */tmp-
*
2328 # Delete debugging dump files.
2329 -rm -f
*.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop
2330 -rm -f
*.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.addressof
2331 -rm -f
*.regmove
*.mach
*.bp
*.gcse
*.flow2
*.peephole2
2332 -rm -f
*/*.greg
*/*.lreg
*/*.combine
*/*.flow
*/*.cse
*/*.jump
*/*.rtl
2333 -rm -f
*/*.tree
*/*.loop
*/*.dbr
*/*.jump2
*/*.sched
*/*.cse2
2334 -rm -f
*/*.sched2
*/*.stack
*/*.regmove
*/*.gcse
*/*.flow2
2335 -rm -f
*/*.peephole2
2336 # Delete some files made during installation.
2337 -rm -f specs float.h-
* enquire SYSCALLS.c.X SYSCALLS.c
2338 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2339 # Delete files generated for fixproto
2340 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2341 gen-protos fixproto.list fixtmp.
* fixhdr.ready
2342 # Delete unwanted output files from TeX.
2343 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
2344 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
2345 # Delete sorted indices we don't actually use.
2346 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2347 # Delete core dumps.
2351 # Delete all files made by compilation
2352 # that don't exist in the distribution.
2353 clean: mostlyclean intl.
clean lang.
clean
2354 # It may not be quite desirable to delete unprotoize.c here,
2355 # but the spec for `make clean' requires it.
2356 # Using unprotoize.c is not quite right in the first place,
2357 # but what better way is there?
2358 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2362 -if
[ -f md.pre-cpp
]; then \
2365 # Delete the include directory.
2367 # Delete files used by the "multilib" facility (including libgcc subdirs).
2368 -rm -f multilib.h tmpmultilib
*
2369 -if
[ "x$(MULTILIB_DIRNAMES)" != x
] ; then \
2370 rm -rf
$(MULTILIB_DIRNAMES
); \
2371 else if
[ "x$(MULTILIB_OPTIONS)" != x
] ; then \
2372 rm -rf
`echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2374 -rm -fr stage1 stage2 stage3 stage4
2376 # Delete all files that users would normally create
2377 # while building and installing GCC.
2378 INTL_DISTCLEAN
= intl.
distclean
2379 distclean: clean $(INTL_DISTCLEAN
) lang.
distclean
2380 -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
2382 -rm -f config.status config.run config.cache config.bak
2383 -rm -f Make-lang Make-hooks Make-host Make-target
2384 -rm -f Makefile specs.h options.h gencheck.h
*.oaux
2385 -rm -f gthr-default.h
2386 -rm -f
*/stage1
*/stage2
*/stage3
*/stage4
*/include
2387 -rm -f c-parse.output
2390 -rm -f site.exp site.bak testsuite
/site.exp testsuite
/site.bak
2391 -rm -f testsuite
/{gcc
,g
++}.
{log
,sum
}
2392 -rm -f intl
/libintl.h libintl.h
2394 # Delete anything likely to be found in the source directory
2395 # that shouldn't be in the distribution.
2396 extraclean
: distclean lang.extraclean
2397 -rm -rf
=* .
/"#"* *~
* config
/=* config
/"#"* config
/*~
*
2398 -rm -f patch
* *.orig
*.rej config
/patch
* config
/*.orig config
/*.rej
2399 -rm -f config
/*/=* config
/*/"#"* config
/*/*~
*
2400 -rm -f config
/*/*.orig config
/*/*.rej
2401 -rm -f
*.
dvi *.ps
*.oaux
*.d
*.
[zZ
] *.gz
2402 -rm -f
*.
tar *.xtar
*diff
*.diff.
* *.
tar.
* *.xtar.
* *diffs
2403 -rm -f
*lose config
/*lose config
/*/*lose
2404 -rm -f
*.s
*.s
[0-9] *.i config
/ChangeLog
2405 -rm -f y.tab.c
yacc.
*
2406 -rm -f
*/=* */"#"* */*~
*
2407 -rm -f
*/patch
* */*.orig
*/*.rej
2408 -rm -f
*/*.
dvi */*.oaux
*/*.d
*/*.
[zZ
] */*.gz
2409 -rm -f
*/*.
tar */*.xtar
*/*diff
*/*.diff.
* */*.
tar.
* */*.xtar.
* */*diffs
2410 -rm -f
*/*lose
*/*.s
*/*.s
[0-9] */*.i
2412 # Get rid of every file that's generated from some other file, except for `configure'.
2413 # Most of these files ARE PRESENT in the GCC distribution.
2414 # We define INTL_DISTCLEAN to be empty in the submake, so that
2415 # we don't descend into intl after its makefile has been removed.
2417 @echo
'This command is intended for maintainers to use; it'
2418 @echo
'deletes files that may need special tools to rebuild.'
2419 $(MAKE
) INTL_DISTCLEAN
= distclean \
2420 intl.maintainer-clean lang.maintainer-clean
2421 -rm -f c-parse.y c-gperf.h
2422 -rm -f c-parse.c c-parse.h c-parse.output
2423 -rm -f cexp.c cexp.output TAGS
2424 -rm -f
cpp.
info* cpp.??s
cpp.
*aux
2425 -rm -f gcc.
info* gcc.??s gcc.
*aux
2427 # Entry points `install' and `uninstall'.
2428 # Also use `install-collect2' to install collect2 when the config files don't.
2430 # The semicolon is to prevent the install.sh -> install default rule
2431 # from doing anything. Having it run true helps avoid problems and
2432 # noise from versions of make which don't like to have null commands.
2433 install: $(INSTALL_TARGET
) ; @true
2435 # Copy the compiler files into directories where they will be run.
2436 # Install the driver last so that the window when things are
2438 install-normal
: install-common
$(INSTALL_HEADERS
) $(INSTALL_LIBGCC
) \
2439 $(INSTALL_CPP
) install-man install-info intl.
install lang.install-normal \
2442 # Do nothing while making gcc with a cross-compiler. The person who
2443 # makes gcc for the target machine has to know how to put a complete
2444 # gcc together by hand.
2445 install-build
: force
2446 @echo You have to
install gcc on your target machine by hand.
2448 # Run this on the target machine
2449 # to finish installation of cross compiler.
2450 # This is not used anymore now that float.h does not depend on enquire.
2451 install-cross-rest
: install-float-h-cross
2453 # Handle cpp installation.
2454 install-cpp
: xcpp
$(exeext
)
2455 -rm -f
$(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2456 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2457 if
[ x
$(cpp_install_dir
) != x
]; then \
2458 rm -f
$(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2459 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2463 -rm -f
$(bindir)/cpp
2464 -if
[ x
$(cpp_install_dir
) != x
]; then \
2465 rm -f
$(prefix)/$(cpp_install_dir
)/cpp; \
2468 # Install float.h for cross compiler.
2469 # Run this on the target machine!
2470 # This is not used anymore now that float.h does not depend on enquire.
2471 install-float-h-cross
: installdirs
2472 # if [ -f enquire ] ; then true; else false; fi
2473 # Note: don't use -. We should fail right away if enquire was not made.
2474 .
/enquire
-f
> $(tmpdir
)/float.h
2475 -rm -f
$(libsubdir
)/include/float.h
2476 $(INSTALL_DATA
) $(tmpdir
)/float.h
$(libsubdir
)/include/float.h
2477 -rm -f
$(tmpdir
)/float.h
2478 chmod a-x
$(libsubdir
)/include/float.h
2480 # Create the installation directories.
2482 -if
[ -d
$(prefix) ] ; then true
; else mkdir
$(prefix) ; chmod a
+rx
$(prefix) ; fi
2483 -if
[ -d
$(exec_prefix) ] ; then true
; else mkdir
$(exec_prefix) ; chmod a
+rx
$(exec_prefix) ; fi
2484 -if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; chmod a
+rx
$(libdir) ; fi
2485 -if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; chmod a
+rx
$(libdir)/gcc-lib
; fi
2486 # This dir isn't currently searched by cpp.
2487 # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2488 -fdir
= ; for
dir in
`echo $(libsubdir) | tr '/' ' '`; do \
2489 fdir
=$${fdir}/$${dir}; \
2490 if
[ -d
$${fdir} ] ; then true
; else mkdir
$${fdir}; chmod a
+rx
$${fdir}; fi
; \
2492 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; chmod a
+rx
$(bindir) ; fi
2493 -if
[ -d
$(includedir) ] ; then true
; else mkdir
$(includedir) ; chmod a
+rx
$(includedir) ; fi
2494 -if
[ -d
$(gcc_tooldir
) ] ; then true
; else mkdir
$(gcc_tooldir
) ; chmod a
+rx
$(gcc_tooldir
) ; fi
2495 -if
[ -d
$(assertdir
) ] ; then true
; else mkdir
$(assertdir
) ; chmod a
+rx
$(assertdir
) ; fi
2496 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; chmod a
+rx
$(infodir) ; fi
2497 # We don't use mkdir -p to create the parents of man1dir,
2498 # because some systems don't support it.
2499 # Instead, we use this technique to create the immediate parent of man1dir.
2500 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
2501 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; chmod a
+rx
$$parent ; fi
2502 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; chmod a
+rx
$(man1dir) ; fi
2504 # Install the compiler executables built during cross compilation.
2505 install-common
: native
installdirs $(EXTRA_PARTS
) lang.install-common
2506 for file in
$(COMPILERS
); do \
2507 if
[ -f
$$file ] ; then \
2508 rm -f
$(libsubdir
)/$$file; \
2509 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2513 for file in
$(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) ..
; do \
2514 if
[ x
"$$file" != x..
]; then \
2515 rm -f
$(libsubdir
)/$$file; \
2516 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2519 for file in
$(EXTRA_PARTS
) ..
; do \
2520 if
[ x
"$$file" != x..
]; then \
2521 rm -f
$(libsubdir
)/$$file; \
2522 $(INSTALL_DATA
) $$file $(libsubdir
)/$$file; \
2523 chmod a-x
$(libsubdir
)/$$file; \
2526 # Don't mess with specs if it doesn't exist yet.
2527 -if
[ -f specs
] ; then \
2528 rm -f
$(libsubdir
)/specs
; \
2529 $(INSTALL_DATA
) specs
$(libsubdir
)/specs
; \
2530 chmod a-x
$(libsubdir
)/specs
; \
2532 # Install protoize if it was compiled.
2533 -if
[ -f protoize
$(exeext
) ]; \
2535 if
[ -f gcc-cross
$(exeext
) ] ; then \
2536 rm -f
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2537 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2538 rm -f
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2539 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2541 rm -f
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2542 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2543 rm -f
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2544 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2546 rm -f
$(libsubdir
)/SYSCALLS.c.X
; \
2547 $(INSTALL_DATA
) SYSCALLS.c.X
$(libsubdir
)/SYSCALLS.c.X
; \
2548 chmod a-x
$(libsubdir
)/SYSCALLS.c.X
; \
2550 -rm -f
$(libsubdir
)/cpp$(exeext
)
2551 $(INSTALL_PROGRAM
) cpp$(exeext
) $(libsubdir
)/cpp$(exeext
)
2552 # Install gcov if it was compiled.
2553 -if
[ -f gcov
$(exeext
) ]; \
2555 rm -f
$(bindir)/gcov
$(exeext
); \
2556 $(INSTALL_PROGRAM
) gcov
$(exeext
) $(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
); \
2559 # Install the driver program as $(target_alias)-gcc
2560 # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
2561 install-driver
: xgcc
$(exeext
)
2562 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2563 rm -f
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2564 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2565 if
[ -d
$(gcc_tooldir
)/bin
/.
] ; then \
2566 rm -f
$(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2567 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2570 rm -f
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2571 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2572 rm -f
$(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2573 $(LN
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2574 mv
$(bindir)/$(target_alias
)-gcc-1
$(exeext
) $(bindir)/$(target_alias
)-gcc
$(exeext
); \
2577 # Install the info files.
2578 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2579 # to do the install.
2580 install-info
: doc
installdirs lang.install-info
2581 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2582 for f in
cpp.
info* gcc.
info*; do \
2583 $(INSTALL_DATA
) $$f $(infodir)/$$f; \
2585 -if
$(SHELL
) -c
'install-info --version' >/dev
/null
2>&1; then \
2586 if
[ -f
$(infodir)/dir ] ; then \
2587 for f in
cpp.
info gcc.
info; do \
2588 install-info
--dir-file
=$(infodir)/dir $(infodir)/$$f; \
2592 -chmod a-x
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2594 # Install the man pages.
2595 install-man
: installdirs $(srcdir)/gcc
.1 $(srcdir)/cccp
.1 lang.install-man
2596 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2597 rm -f
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2598 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2599 chmod a-x
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2601 rm -f
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2602 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2603 chmod a-x
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2605 -rm -f
$(man1dir)/cccp
$(manext)
2606 -$(INSTALL_DATA
) $(srcdir)/cccp
.1 $(man1dir)/cccp
$(manext)
2607 -chmod a-x
$(man1dir)/cccp
$(manext)
2609 # Install the library.
2610 install-libgcc
: libgcc.a
installdirs
2611 -if
[ -f libgcc.a
] ; then \
2612 rm -f
$(libsubdir
)/libgcc.a
; \
2613 $(INSTALL_DATA
) libgcc.a
$(libsubdir
)/libgcc.a
; \
2614 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
2615 (cd
$(libsubdir
); $(RANLIB_FOR_TARGET
) libgcc.a
); else true
; fi
; \
2616 chmod a-x
$(libsubdir
)/libgcc.a
; \
2619 # Install multiple versions of libgcc.a.
2620 install-multilib
: stmp-multilib
installdirs
2621 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
2622 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2623 if
[ -d
$(libsubdir
)/$${dir} ]; then true
; else mkdir
$(libsubdir
)/$${dir}; fi
; \
2624 for f in libgcc.a
$(EXTRA_MULTILIB_PARTS
); do \
2625 rm -f
$(libsubdir
)/$${dir}/$${f}; \
2626 $(INSTALL_DATA
) $${dir}/$${f} $(libsubdir
)/$${dir}/$${f}; \
2628 if
$(RANLIB_TEST_FOR_TARGET
); then \
2629 (cd
$(libsubdir
)/$${dir}; $(RANLIB_FOR_TARGET
) libgcc.a
); \
2631 chmod a-x
$(libsubdir
)/$${dir}/libgcc.a
; \
2634 # Install all the header files built in the include subdirectory.
2635 install-headers
: install-include-dir
$(INSTALL_HEADERS_DIR
) $(INSTALL_ASSERT_H
)
2636 # Fix symlinks to absolute paths in the installed include directory to
2637 # point to the installed directory, not the build directory.
2638 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
2639 -files
=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2640 if
[ $$?
-eq
0 ]; then \
2641 dir=`cd include; pwd`; \
2642 for i in
$$files; do \
2643 dest
=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2644 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
2645 rm -f
$(libsubdir
)/include/$$i; \
2646 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir
)/include/$$i; \
2651 # Create or recreate the gcc private include file directory.
2652 install-include-dir
: installdirs
2653 -rm -rf
$(libsubdir
)/include
2654 mkdir
$(libsubdir
)/include
2655 -chmod a
+rx
$(libsubdir
)/include
2657 # Install the include directory using tar.
2658 install-headers-tar
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2659 # We use `pwd`/include instead of just include to problems with CDPATH
2660 # Unless a full pathname is provided, some shells would print the new CWD,
2661 # found in CDPATH, corrupting the output. We could just redirect the
2662 # output of `cd', but some shells lose on redirection within `()'s
2663 (cd
`pwd`/include ; \
2664 tar -cf
- .
; exit
0) |
(cd
$(libsubdir
)/include; tar xpf
- )
2665 # /bin/sh on some systems returns the status of the first tar,
2666 # and that can lose with GNU tar which always writes a full block.
2667 # So use `exit 0' to ignore its exit status.
2669 # Install the include directory using cpio.
2670 install-headers-cpio
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2671 # See discussion about the use of `pwd` above
2672 cd
`pwd`/include ; \
2673 find .
-print | cpio
-pdum
$(libsubdir
)/include
2675 # Put assert.h where it won't override GNU libc's assert.h.
2676 # It goes in a dir that is searched after GNU libc's headers;
2677 # thus, the following conditionals are no longer needed.
2678 # But it's not worth deleting them now.
2679 ## Don't replace the assert.h already there if it is not from GCC.
2680 ## This code would be simpler if it tested for -f ... && ! grep ...
2681 ## but supposedly the ! operator is missing in sh on some systems.
2682 install-assert-h
: assert.h
installdirs
2683 if
[ -f
$(assertdir
)/assert.h
]; \
2685 if grep
"__eprintf" $(assertdir
)/assert.h
>/dev
/null
; \
2687 rm -f
$(assertdir
)/assert.h
; \
2688 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2689 chmod a-x
$(assertdir
)/assert.h
; \
2693 rm -f
$(assertdir
)/assert.h
; \
2694 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2695 chmod a-x
$(assertdir
)/assert.h
; \
2698 # Use this target to install the program `collect2' under the name `collect2'.
2699 install-collect2
: collect2
installdirs
2700 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(libsubdir
)/collect2
$(exeext
)
2701 # Install the driver program as $(libsubdir)/gcc for collect2.
2702 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(libsubdir
)/gcc
$(exeext
)
2704 # Cancel installation by deleting the installed files.
2705 uninstall: intl.
uninstall lang.
uninstall $(UNINSTALL_CPP
)
2706 -rm -rf
$(libsubdir
)
2707 -rm -rf
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
2708 -rm -rf
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
)
2709 -rm -rf
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
)
2710 -rm -rf
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
)
2711 -rm -rf
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
)
2712 -rm -rf
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
)
2713 -rm -rf
$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
)
2714 -rm -rf
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext)
2715 -rm -rf
$(man1dir)/$(GCC_CROSS_NAME
)$(manext)
2716 -rm -rf
$(man1dir)/cccp
$(manext)
2717 -rm -rf
$(man1dir)/protoize
$(manext)
2718 -rm -rf
$(man1dir)/unprotoize
$(manext)
2719 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2721 # These targets are for the dejagnu testsuites. The file site.exp
2722 # contains global variables that all the testsuites will use.
2724 # Set to $(target_alias)/ for cross.
2725 target_subdir
= @target_subdir@
2727 site.exp
: .
/config.status Makefile
2728 @echo
"Making a new config file..."
2731 -@mv site.exp site.bak
2732 @echo
"## these variables are automatically generated by make ##" > .
/tmp0
2733 @echo
"# Do not edit here. If you wish to override these values" >> .
/tmp0
2734 @echo
"# add them to the last section" >> .
/tmp0
2735 @echo
"set rootme \"`pwd`\"" >> .
/tmp0
2736 @echo
"set srcdir \"`cd ${srcdir}; pwd`\"" >> .
/tmp0
2737 @echo
"set host_triplet $(host_canonical)" >> .
/tmp0
2738 @echo
"set build_triplet $(build_canonical)" >> .
/tmp0
2739 @echo
"set target_triplet $(target)" >> .
/tmp0
2740 @echo
"set target_alias $(target_alias)" >> .
/tmp0
2741 # CFLAGS is set even though it's empty to show we reserve the right to set it.
2742 @echo
"set CFLAGS \"\"" >> .
/tmp0
2743 @echo
"set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> .
/tmp0
2744 # If newlib has been configured, we need to pass -B to gcc so it can find
2745 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
2746 # message if it doesn't, but the testsuite is supposed to ignore the message -
2747 # it's too difficult to tell when to and when not to pass -B (not all targets
2748 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
2749 # seems like too selective a test.
2750 # ??? Another way to solve this might be to rely on linker scripts. Then
2751 # theoretically the -B won't be needed.
2752 # We also need to pass -L ../ld so that the linker can find ldscripts.
2753 @if
[ -d
$(objdir
)/..
/$(target_subdir
)newlib
] ; then \
2754 echo
"set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> .
/tmp0
; \
2755 echo
"set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> .
/tmp0
; \
2756 echo
"append CFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2757 echo
"append CXXFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2758 echo
"append LDFLAGS \" \$$newlib_ldflags\"" >> .
/tmp0
; \
2761 @if
[ -d
$(objdir
)/..
/ld ] ; then \
2762 echo
"append LDFLAGS \" -L$(objdir)/../ld\"" >> .
/tmp0
; \
2765 echo
"set tmpdir $(objdir)/testsuite" >> .
/tmp0
2766 @echo
"set srcdir \"\$${srcdir}/testsuite\"" >> .
/tmp0
2767 @echo
"## All variables above are generated by configure. Do Not Edit ##" >> .
/tmp0
2768 @cat .
/tmp0
> site.exp
2769 @cat site.bak | sed \
2770 -e
'1,/^## All variables above are.*##/ d' >> site.exp
2773 CHECK_TARGETS
= check-gcc check-g
++ check-g77 check-objc
2775 check: $(CHECK_TARGETS
)
2777 testsuite
/site.exp
: site.exp
2778 if
[ -d testsuite
]; then \
2783 rm -rf testsuite
/site.exp
2784 cp site.exp testsuite
/site.exp
2786 check-g
++: testsuite
/site.exp
2787 -rootme
=`pwd`; export rootme
; \
2788 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2790 EXPECT
=${EXPECT} ; export EXPECT
; \
2791 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2792 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2793 export TCL_LIBRARY
; fi
; \
2794 $(RUNTEST
) --tool g
++ $(RUNTESTFLAGS
)
2796 check-gcc
: testsuite
/site.exp
2797 -rootme
=`pwd`; export rootme
; \
2798 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2800 EXPECT
=${EXPECT} ; export EXPECT
; \
2801 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2802 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2803 export TCL_LIBRARY
; fi
; \
2804 $(RUNTEST
) --tool gcc
$(RUNTESTFLAGS
)
2806 check-g77
: testsuite
/site.exp
2807 -rootme
=`pwd`; export rootme
; \
2808 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2810 EXPECT
=${EXPECT} ; export EXPECT
; \
2811 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2812 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2813 export TCL_LIBRARY
; fi
; \
2814 $(RUNTEST
) --tool g77
$(RUNTESTFLAGS
)
2816 check-objc
: testsuite
/site.exp
2817 -rootme
=`pwd`; export rootme
; \
2818 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2820 EXPECT
=${EXPECT} ; export EXPECT
; \
2821 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2822 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2823 export TCL_LIBRARY
; fi
; \
2824 $(RUNTEST
) --tool objc
$(RUNTESTFLAGS
)
2826 # These exist for maintenance purposes.
2828 # Update the tags table.
2832 mv
-f c-parse.
[ch
] cexp.c
=*.
[chy
] tmp-tags
; \
2833 etags
*.y
*.h
*.c
; \
2837 # Create the distribution tar.gz file.
2839 gzip
--best
< tmp-gcc.xtar
> tmp-gcc.xtar.gz
2840 mv tmp-gcc.xtar.gz gcc-
$(version
).
tar.gz
2842 tmp-gcc.xtar
: distdir
2843 # Make the distribution.
2844 tar -chf tmp-gcc.xtar gcc-
$(version
)
2847 if
[ -d
$(srcdir)/CVS
]; then cd
$(srcdir) && cvs
-r update
; fi
2849 # This target exists to do the initial work before the language specific
2851 distdir-start
: doc
$(srcdir)/INSTALL
$(srcdir)/c-parse.y
$(srcdir)/c-gperf.h \
2852 $(srcdir)/c-parse.c
$(srcdir)/cexp.c
$(srcdir)/config.in \
2853 $(srcdir)/version.c TAGS
2854 @case
'$(USE_NLS)' in \
2856 *) echo
"configure with --enable-nls before making a distribution"; \
2859 @if grep
-s
"for version ${mainversion}" gcc.texi
> /dev
/null
; \
2861 else echo
"You must update the version number in \`gcc.texi'"; sleep
10;\
2863 # Update the version number in README
2864 $(AWK
) '$$1 " " $$2 " " $$3 == "This directory contains" \
2865 { $$6 = version; print $$0 } \
2866 $$1 " " $$2 " " $$3 != "This directory contains"' \
2867 version
=$(version
) $(srcdir)/README
> tmp.README
2868 mv tmp.README README
2869 -rm -rf gcc-
$(version
) tmp
2870 # Put all the files in a temporary subdirectory
2871 # which has the name that we want to have in the tar file.
2878 for file in
`(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \
2879 test -f
$(srcdir)/$$file && $(LN_S
) $(srcdir)/$$file tmp
; \
2881 if
test "$(srcdir)" != "." ; then \
2882 for file in c-parse.c cexp.c
; do \
2883 test -f .
/$$file && $(LN_S
) ..
/$$file tmp
; \
2886 for file in
`(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \
2887 if
test -d
$(srcdir)/config
/$$file \
2888 && test "$$file" != RCS
&& test "$$file" != CVS
; then \
2889 mkdir tmp
/config
/$$file; \
2890 for subfile in
`(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \
2891 $(LN_S
) $(srcdir)/config
/$$file/$$subfile tmp
/config
/$$file; \
2894 $(LN_S
) $(srcdir)/config
/$$file tmp
/config
; \
2897 for file in
`(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \
2898 $(LN_S
) $(srcdir)/ginclude
/$$file tmp
/ginclude
; \
2900 for file in
`(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \
2901 $(LN_S
) $(srcdir)/objc
/$$file tmp
/objc
; \
2903 $(LN_S
) .gdbinit tmp
2905 # Finish making `distdir', after the languages have done their thing.
2907 mv tmp gcc-
$(version
)
2908 # Get rid of everything we don't want in the distribution. We'd want
2909 # this to use Makefile.in, but it doesn't have the `lang.foo' targets
2911 cd gcc-
$(version
); make extraclean distdir-check VERSION_DEP
=
2914 ($(AWK
) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' |
sort) \
2915 < po
/POTFILES.in
> tmp.POTFILES
2916 ls
[A-Za-z
]*.
[ch
] [a-z
]*/[A-Za-z
]*.
[ch
] \
2917 [a-z
]*/[a-z
]*/[A-Za-z
]*.
[ch
] |
sort > tmp.src
2918 diff tmp.POTFILES tmp.src ||
{ \
2919 echo
"po/POTFILES.in and sources do not match -- please fix"; \
2924 distdir
: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
2925 lang.distdir distdir-finish
2927 # make diff oldversion=M.N
2928 # creates a diff file between an older distribution and this one.
2929 # The -P option assumes this is GNU diff.
2931 diff
-rc2P
-x c-parse.y
-x c-parse.c
-x c-parse.h
-x c-gperf.h \
2932 -x cexp.c
-x
-x TAGS
-x INSTALL \
2933 -x configure
-x config.in \
2934 -x
"gcc.??" -x
"gcc.??s" -x gcc.aux
-x
"gcc.info*" \
2935 -x
"cpp.??" -x
"cpp.??s" -x
cpp.aux
-x
"cpp.info*" \
2936 $(LANG_DIFF_EXCLUDES
) \
2937 gcc-
$(oldversion
) gcc-
$(version
) > gcc-
$(oldversion
)-$(version
).diff
2939 bootstrap bootstrap-lean
: force
2940 # Only build the C compiler for stage1, because that is the only one that
2941 # we can guarantee will build with the native compiler, and also it is the
2942 # only thing useful for building stage2.
2943 $(MAKE
) CC
="$(CC)" libdir=$(libdir) LANGUAGES
="$(BOOT_LANGUAGES)"
2945 # This used to define ALLOCA as empty, but that would lead to bad results
2946 # for a subsequent `make install' since that would not have ALLOCA empty.
2947 # To prevent `make install' from compiling alloca.o and then relinking cc1
2948 # because alloca.o is newer, we permit these recursive makes to compile
2949 # alloca.o. Then cc1 is newer, so it won't have to be relinked.
2950 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2952 -if
test $@
= bootstrap-lean
; then
rm -rf stage1
; else true
; fi
2953 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2955 bootstrap2 bootstrap2-lean
: force
2956 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2958 -if
test $@
= bootstrap2-lean
; then
rm -rf stage1
; else true
; fi
2959 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2961 bootstrap3 bootstrap3-lean
: force
2962 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2964 bootstrap4 bootstrap4-lean
: force
2965 $(MAKE
) CC
="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage3
/ LANGUAGES
="$(LANGUAGES)"
2967 # Compare the object files in the current directory with those in the
2970 # ./ avoids bug in some versions of tail.
2971 compare compare3 compare4 compare-lean compare3-lean compare4-lean
: force
2973 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2974 for file in
*$(objext
); do \
2975 tail
+16c .
/$$file > tmp-foo1
; \
2976 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2977 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2979 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2980 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2981 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2982 for file in
$$dir/*$(objext
); do \
2983 tail
+16c .
/$$file > tmp-foo1
; \
2984 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2985 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2990 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2991 if
[ -f .bad_compare
]; then \
2992 echo
"Bootstrap comparison failure!"; \
2997 *-lean
) rm -rf stage
$$stage ;; \
3002 # Compare the object files in the current directory with those in the
3003 # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
3004 # running tail and the overhead of twice copying each object file.
3006 gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean
: force
3008 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3009 for file in
*$(objext
); do \
3010 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3012 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3013 for
dir in tmp-foo intl
$(SUBDIRS
); do \
3014 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
3015 for file in
$$dir/*$(objext
); do \
3016 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3020 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3021 if
[ -f .bad_compare
]; then \
3022 echo
"Bootstrap comparison failure!"; \
3027 *-lean
) rm -rf stage
$$stage ;; \
3031 # Copy the object files from a particular stage into a subdirectory.
3033 -if
[ -d stage1
] ; then true
; else mkdir stage1
; fi
3034 -for
dir in intl
$(SUBDIRS
) ; \
3036 if
[ -d stage1
/$$dir ] ; then true
; else mkdir stage1
/$$dir ; fi
; \
3038 -mv
$(STAGESTUFF
) stage1
3039 -mv intl
/*$(objext
) stage1
/intl
3040 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3041 # dir will work properly.
3042 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage1
; else true
; fi
3043 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage1
; else true
; fi
3044 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage1
; else true
; fi
3045 -rm -f stage1
/libgcc.a
3047 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3048 $(RANLIB_FOR_TARGET
) stage1
/libgcc.a
; \
3050 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3051 cp stage1
/$${f} .
; \
3054 stage1
: force stage1-start lang.stage1
3057 -if
[ -d stage2
] ; then true
; else mkdir stage2
; fi
3058 -for
dir in intl
$(SUBDIRS
) ; \
3060 if
[ -d stage2
/$$dir ] ; then true
; else mkdir stage2
/$$dir ; fi
; \
3062 -mv
$(STAGESTUFF
) stage2
3063 -mv intl
/*$(objext
) stage2
/intl
3064 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3065 # dir will work properly.
3066 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage2
; else true
; fi
3067 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage2
; else true
; fi
3068 -if
[ -f collect-ld
] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage2
; else true
; fi
3069 -rm -f stage2
/libgcc.a
3071 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3072 $(RANLIB_FOR_TARGET
) stage2
/libgcc.a
; \
3074 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3075 cp stage2
/$${f} .
; \
3078 stage2
: force stage2-start lang.stage2
3081 -if
[ -d stage3
] ; then true
; else mkdir stage3
; fi
3082 -for
dir in intl
$(SUBDIRS
) ; \
3084 if
[ -d stage3
/$$dir ] ; then true
; else mkdir stage3
/$$dir ; fi
; \
3086 -mv
$(STAGESTUFF
) stage3
3087 -mv intl
/*$(objext
) stage3
/intl
3088 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3089 # dir will work properly.
3090 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage3
; else true
; fi
3091 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage3
; else true
; fi
3092 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage3
; else true
; fi
3093 -rm -f stage3
/libgcc.a
3095 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3096 $(RANLIB_FOR_TARGET
) stage3
/libgcc.a
; \
3098 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3099 cp stage3
/$${f} .
; \
3102 stage3
: force stage3-start lang.stage3
3105 -if
[ -d stage4
] ; then true
; else mkdir stage4
; fi
3106 -for
dir in intl
$(SUBDIRS
) ; \
3108 if
[ -d stage4
/$$dir ] ; then true
; else mkdir stage4
/$$dir ; fi
; \
3110 -mv
$(STAGESTUFF
) stage4
3111 -mv intl
/*$(objext
) stage4
/intl
3112 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3113 # dir will work properly.
3114 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage4
; else true
; fi
3115 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage4
; else true
; fi
3116 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage4
; else true
; fi
3117 -rm -f stage4
/libgcc.a
3119 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3120 $(RANLIB_FOR_TARGET
) stage4
/libgcc.a
; \
3122 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3123 cp stage4
/$${f} .
; \
3126 stage4
: force stage4-start lang.stage4
3128 # Copy just the executable files from a particular stage into a subdirectory,
3129 # and delete the object files. Use this if you're just verifying a version
3130 # that is pretty sure to work, and you are short of disk space.
3131 risky-stage1
: stage1
3134 risky-stage2
: stage2
3137 risky-stage3
: stage3
3140 risky-stage4
: stage4
3143 #In GNU Make, ignore whether `stage*' exists.
3144 .PHONY
: stage1 stage2 stage3 stage4
clean maintainer-clean TAGS bootstrap
3145 .PHONY
: risky-stage1 risky-stage2 risky-stage3 risky-stage4
3150 # The enquire rules are still useful for building new float-anything.h.
3151 # Special flags for compiling enquire.
3152 # We disable optimization to make floating point more reliable.
3153 ENQUIRE_CFLAGS
= -DNO_MEM
-DNO_LONG_DOUBLE_IO
-O0
3154 ENQUIRE_LDFLAGS
= $(LDFLAGS
)
3156 # Enquire target (This is a variable so that a target can choose not to
3160 # Test to see whether <float.h> exists in the system header files,
3161 # and is not derived from GCC.
3163 [ -f
$(SYSTEM_HEADER_DIR
)/float.h
] && \
3164 if grep
'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR
)/float.h
>/dev
/null
; \
3167 # We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
3168 # to ensure, we're emitting a full blown <float.h> ourselves.
3169 FLOAT_H_TEST
= false
3171 # Used to compile enquire with standard cc, but have forgotten why.
3172 # Let's try with GCC.
3173 enquire
: enquire.o
$(GCC_PARTS
)
3174 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ENQUIRE_LDFLAGS
) enquire.o
-o
$@
3175 enquire.o
: $(srcdir)/enquire.c
$(GCC_PASSES
) stmp-int-hdrs
3176 if
$(FLOAT_H_TEST
); then \
3177 rm -f
include/float.h
; \
3178 SYS_FLOAT_H_WRAP
=1; \
3180 SYS_FLOAT_H_WRAP
=0; \
3182 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(ENQUIRE_CFLAGS
) \
3183 -DSYS_FLOAT_H_WRAP
=$$SYS_FLOAT_H_WRAP \
3184 -I.
-c
$(srcdir)/enquire.c
3186 # Create float.h source for the native machine.
3187 # Make it empty if we can use the system float.h without changes.
3188 float.h-nat
: enquire
3189 -.
/enquire
-f
> tmp-float.h
3190 grep
'#define [^_]' tmp-float.h
>/dev
/null || true
> tmp-float.h
3191 mv tmp-float.h float.h-nat
3193 # Create a dummy float.h source for a cross-compiler.
3194 # ??? This isn't used anymore. Should we create config/float-unkn.h
3195 # and make that the default float_format in configure?
3197 echo
"#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
3198 echo
"#error float.h values not known for cross-compiler" >> t-float.h-cross
3199 echo
"#endif" >> t-float.h-cross
3200 mv t-float.h-cross float.h-cross