]>
Commit | Line | Data |
---|---|---|
7afe21cc RK |
1 | /* Common subexpression elimination for GNU compiler. |
2 | Copyright (C) 1987, 1988, 1989, 1992 Free Software Foundation, Inc. | |
3 | ||
4 | This file is part of GNU CC. | |
5 | ||
6 | GNU CC is free software; you can redistribute it and/or modify | |
7 | it under the terms of the GNU General Public License as published by | |
8 | the Free Software Foundation; either version 2, or (at your option) | |
9 | any later version. | |
10 | ||
11 | GNU CC is distributed in the hope that it will be useful, | |
12 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | GNU General Public License for more details. | |
15 | ||
16 | You should have received a copy of the GNU General Public License | |
17 | along with GNU CC; see the file COPYING. If not, write to | |
18 | the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
19 | ||
20 | ||
21 | #include "config.h" | |
22 | #include "rtl.h" | |
23 | #include "regs.h" | |
24 | #include "hard-reg-set.h" | |
25 | #include "flags.h" | |
26 | #include "real.h" | |
27 | #include "insn-config.h" | |
28 | #include "recog.h" | |
29 | ||
30 | #include <stdio.h> | |
31 | #include <setjmp.h> | |
32 | ||
33 | /* The basic idea of common subexpression elimination is to go | |
34 | through the code, keeping a record of expressions that would | |
35 | have the same value at the current scan point, and replacing | |
36 | expressions encountered with the cheapest equivalent expression. | |
37 | ||
38 | It is too complicated to keep track of the different possibilities | |
39 | when control paths merge; so, at each label, we forget all that is | |
40 | known and start fresh. This can be described as processing each | |
41 | basic block separately. Note, however, that these are not quite | |
42 | the same as the basic blocks found by a later pass and used for | |
43 | data flow analysis and register packing. We do not need to start fresh | |
44 | after a conditional jump instruction if there is no label there. | |
45 | ||
46 | We use two data structures to record the equivalent expressions: | |
47 | a hash table for most expressions, and several vectors together | |
48 | with "quantity numbers" to record equivalent (pseudo) registers. | |
49 | ||
50 | The use of the special data structure for registers is desirable | |
51 | because it is faster. It is possible because registers references | |
52 | contain a fairly small number, the register number, taken from | |
53 | a contiguously allocated series, and two register references are | |
54 | identical if they have the same number. General expressions | |
55 | do not have any such thing, so the only way to retrieve the | |
56 | information recorded on an expression other than a register | |
57 | is to keep it in a hash table. | |
58 | ||
59 | Registers and "quantity numbers": | |
60 | ||
61 | At the start of each basic block, all of the (hardware and pseudo) | |
62 | registers used in the function are given distinct quantity | |
63 | numbers to indicate their contents. During scan, when the code | |
64 | copies one register into another, we copy the quantity number. | |
65 | When a register is loaded in any other way, we allocate a new | |
66 | quantity number to describe the value generated by this operation. | |
67 | `reg_qty' records what quantity a register is currently thought | |
68 | of as containing. | |
69 | ||
70 | All real quantity numbers are greater than or equal to `max_reg'. | |
71 | If register N has not been assigned a quantity, reg_qty[N] will equal N. | |
72 | ||
73 | Quantity numbers below `max_reg' do not exist and none of the `qty_...' | |
74 | variables should be referenced with an index below `max_reg'. | |
75 | ||
76 | We also maintain a bidirectional chain of registers for each | |
77 | quantity number. `qty_first_reg', `qty_last_reg', | |
78 | `reg_next_eqv' and `reg_prev_eqv' hold these chains. | |
79 | ||
80 | The first register in a chain is the one whose lifespan is least local. | |
81 | Among equals, it is the one that was seen first. | |
82 | We replace any equivalent register with that one. | |
83 | ||
84 | If two registers have the same quantity number, it must be true that | |
85 | REG expressions with `qty_mode' must be in the hash table for both | |
86 | registers and must be in the same class. | |
87 | ||
88 | The converse is not true. Since hard registers may be referenced in | |
89 | any mode, two REG expressions might be equivalent in the hash table | |
90 | but not have the same quantity number if the quantity number of one | |
91 | of the registers is not the same mode as those expressions. | |
92 | ||
93 | Constants and quantity numbers | |
94 | ||
95 | When a quantity has a known constant value, that value is stored | |
96 | in the appropriate element of qty_const. This is in addition to | |
97 | putting the constant in the hash table as is usual for non-regs. | |
98 | ||
d45cf215 | 99 | Whether a reg or a constant is preferred is determined by the configuration |
7afe21cc RK |
100 | macro CONST_COSTS and will often depend on the constant value. In any |
101 | event, expressions containing constants can be simplified, by fold_rtx. | |
102 | ||
103 | When a quantity has a known nearly constant value (such as an address | |
104 | of a stack slot), that value is stored in the appropriate element | |
105 | of qty_const. | |
106 | ||
107 | Integer constants don't have a machine mode. However, cse | |
108 | determines the intended machine mode from the destination | |
109 | of the instruction that moves the constant. The machine mode | |
110 | is recorded in the hash table along with the actual RTL | |
111 | constant expression so that different modes are kept separate. | |
112 | ||
113 | Other expressions: | |
114 | ||
115 | To record known equivalences among expressions in general | |
116 | we use a hash table called `table'. It has a fixed number of buckets | |
117 | that contain chains of `struct table_elt' elements for expressions. | |
118 | These chains connect the elements whose expressions have the same | |
119 | hash codes. | |
120 | ||
121 | Other chains through the same elements connect the elements which | |
122 | currently have equivalent values. | |
123 | ||
124 | Register references in an expression are canonicalized before hashing | |
125 | the expression. This is done using `reg_qty' and `qty_first_reg'. | |
126 | The hash code of a register reference is computed using the quantity | |
127 | number, not the register number. | |
128 | ||
129 | When the value of an expression changes, it is necessary to remove from the | |
130 | hash table not just that expression but all expressions whose values | |
131 | could be different as a result. | |
132 | ||
133 | 1. If the value changing is in memory, except in special cases | |
134 | ANYTHING referring to memory could be changed. That is because | |
135 | nobody knows where a pointer does not point. | |
136 | The function `invalidate_memory' removes what is necessary. | |
137 | ||
138 | The special cases are when the address is constant or is | |
139 | a constant plus a fixed register such as the frame pointer | |
140 | or a static chain pointer. When such addresses are stored in, | |
141 | we can tell exactly which other such addresses must be invalidated | |
142 | due to overlap. `invalidate' does this. | |
143 | All expressions that refer to non-constant | |
144 | memory addresses are also invalidated. `invalidate_memory' does this. | |
145 | ||
146 | 2. If the value changing is a register, all expressions | |
147 | containing references to that register, and only those, | |
148 | must be removed. | |
149 | ||
150 | Because searching the entire hash table for expressions that contain | |
151 | a register is very slow, we try to figure out when it isn't necessary. | |
152 | Precisely, this is necessary only when expressions have been | |
153 | entered in the hash table using this register, and then the value has | |
154 | changed, and then another expression wants to be added to refer to | |
155 | the register's new value. This sequence of circumstances is rare | |
156 | within any one basic block. | |
157 | ||
158 | The vectors `reg_tick' and `reg_in_table' are used to detect this case. | |
159 | reg_tick[i] is incremented whenever a value is stored in register i. | |
160 | reg_in_table[i] holds -1 if no references to register i have been | |
161 | entered in the table; otherwise, it contains the value reg_tick[i] had | |
162 | when the references were entered. If we want to enter a reference | |
163 | and reg_in_table[i] != reg_tick[i], we must scan and remove old references. | |
164 | Until we want to enter a new entry, the mere fact that the two vectors | |
165 | don't match makes the entries be ignored if anyone tries to match them. | |
166 | ||
167 | Registers themselves are entered in the hash table as well as in | |
168 | the equivalent-register chains. However, the vectors `reg_tick' | |
169 | and `reg_in_table' do not apply to expressions which are simple | |
170 | register references. These expressions are removed from the table | |
171 | immediately when they become invalid, and this can be done even if | |
172 | we do not immediately search for all the expressions that refer to | |
173 | the register. | |
174 | ||
175 | A CLOBBER rtx in an instruction invalidates its operand for further | |
176 | reuse. A CLOBBER or SET rtx whose operand is a MEM:BLK | |
177 | invalidates everything that resides in memory. | |
178 | ||
179 | Related expressions: | |
180 | ||
181 | Constant expressions that differ only by an additive integer | |
182 | are called related. When a constant expression is put in | |
183 | the table, the related expression with no constant term | |
184 | is also entered. These are made to point at each other | |
185 | so that it is possible to find out if there exists any | |
186 | register equivalent to an expression related to a given expression. */ | |
187 | ||
188 | /* One plus largest register number used in this function. */ | |
189 | ||
190 | static int max_reg; | |
191 | ||
192 | /* Length of vectors indexed by quantity number. | |
193 | We know in advance we will not need a quantity number this big. */ | |
194 | ||
195 | static int max_qty; | |
196 | ||
197 | /* Next quantity number to be allocated. | |
198 | This is 1 + the largest number needed so far. */ | |
199 | ||
200 | static int next_qty; | |
201 | ||
202 | /* Indexed by quantity number, gives the first (or last) (pseudo) register | |
203 | in the chain of registers that currently contain this quantity. */ | |
204 | ||
205 | static int *qty_first_reg; | |
206 | static int *qty_last_reg; | |
207 | ||
208 | /* Index by quantity number, gives the mode of the quantity. */ | |
209 | ||
210 | static enum machine_mode *qty_mode; | |
211 | ||
212 | /* Indexed by quantity number, gives the rtx of the constant value of the | |
213 | quantity, or zero if it does not have a known value. | |
214 | A sum of the frame pointer (or arg pointer) plus a constant | |
215 | can also be entered here. */ | |
216 | ||
217 | static rtx *qty_const; | |
218 | ||
219 | /* Indexed by qty number, gives the insn that stored the constant value | |
220 | recorded in `qty_const'. */ | |
221 | ||
222 | static rtx *qty_const_insn; | |
223 | ||
224 | /* The next three variables are used to track when a comparison between a | |
225 | quantity and some constant or register has been passed. In that case, we | |
226 | know the results of the comparison in case we see it again. These variables | |
227 | record a comparison that is known to be true. */ | |
228 | ||
229 | /* Indexed by qty number, gives the rtx code of a comparison with a known | |
230 | result involving this quantity. If none, it is UNKNOWN. */ | |
231 | static enum rtx_code *qty_comparison_code; | |
232 | ||
233 | /* Indexed by qty number, gives the constant being compared against in a | |
234 | comparison of known result. If no such comparison, it is undefined. | |
235 | If the comparison is not with a constant, it is zero. */ | |
236 | ||
237 | static rtx *qty_comparison_const; | |
238 | ||
239 | /* Indexed by qty number, gives the quantity being compared against in a | |
240 | comparison of known result. If no such comparison, if it undefined. | |
241 | If the comparison is not with a register, it is -1. */ | |
242 | ||
243 | static int *qty_comparison_qty; | |
244 | ||
245 | #ifdef HAVE_cc0 | |
246 | /* For machines that have a CC0, we do not record its value in the hash | |
247 | table since its use is guaranteed to be the insn immediately following | |
248 | its definition and any other insn is presumed to invalidate it. | |
249 | ||
250 | Instead, we store below the value last assigned to CC0. If it should | |
251 | happen to be a constant, it is stored in preference to the actual | |
252 | assigned value. In case it is a constant, we store the mode in which | |
253 | the constant should be interpreted. */ | |
254 | ||
255 | static rtx prev_insn_cc0; | |
256 | static enum machine_mode prev_insn_cc0_mode; | |
257 | #endif | |
258 | ||
259 | /* Previous actual insn. 0 if at first insn of basic block. */ | |
260 | ||
261 | static rtx prev_insn; | |
262 | ||
263 | /* Insn being scanned. */ | |
264 | ||
265 | static rtx this_insn; | |
266 | ||
267 | /* Index by (pseudo) register number, gives the quantity number | |
268 | of the register's current contents. */ | |
269 | ||
270 | static int *reg_qty; | |
271 | ||
272 | /* Index by (pseudo) register number, gives the number of the next (or | |
273 | previous) (pseudo) register in the chain of registers sharing the same | |
274 | value. | |
275 | ||
276 | Or -1 if this register is at the end of the chain. | |
277 | ||
278 | If reg_qty[N] == N, reg_next_eqv[N] is undefined. */ | |
279 | ||
280 | static int *reg_next_eqv; | |
281 | static int *reg_prev_eqv; | |
282 | ||
283 | /* Index by (pseudo) register number, gives the number of times | |
284 | that register has been altered in the current basic block. */ | |
285 | ||
286 | static int *reg_tick; | |
287 | ||
288 | /* Index by (pseudo) register number, gives the reg_tick value at which | |
289 | rtx's containing this register are valid in the hash table. | |
290 | If this does not equal the current reg_tick value, such expressions | |
291 | existing in the hash table are invalid. | |
292 | If this is -1, no expressions containing this register have been | |
293 | entered in the table. */ | |
294 | ||
295 | static int *reg_in_table; | |
296 | ||
297 | /* A HARD_REG_SET containing all the hard registers for which there is | |
298 | currently a REG expression in the hash table. Note the difference | |
299 | from the above variables, which indicate if the REG is mentioned in some | |
300 | expression in the table. */ | |
301 | ||
302 | static HARD_REG_SET hard_regs_in_table; | |
303 | ||
304 | /* A HARD_REG_SET containing all the hard registers that are invalidated | |
305 | by a CALL_INSN. */ | |
306 | ||
307 | static HARD_REG_SET regs_invalidated_by_call; | |
308 | ||
309 | /* Two vectors of ints: | |
310 | one containing max_reg -1's; the other max_reg + 500 (an approximation | |
311 | for max_qty) elements where element i contains i. | |
312 | These are used to initialize various other vectors fast. */ | |
313 | ||
314 | static int *all_minus_one; | |
315 | static int *consec_ints; | |
316 | ||
317 | /* CUID of insn that starts the basic block currently being cse-processed. */ | |
318 | ||
319 | static int cse_basic_block_start; | |
320 | ||
321 | /* CUID of insn that ends the basic block currently being cse-processed. */ | |
322 | ||
323 | static int cse_basic_block_end; | |
324 | ||
325 | /* Vector mapping INSN_UIDs to cuids. | |
d45cf215 | 326 | The cuids are like uids but increase monotonically always. |
7afe21cc RK |
327 | We use them to see whether a reg is used outside a given basic block. */ |
328 | ||
329 | static short *uid_cuid; | |
330 | ||
331 | /* Get the cuid of an insn. */ | |
332 | ||
333 | #define INSN_CUID(INSN) (uid_cuid[INSN_UID (INSN)]) | |
334 | ||
335 | /* Nonzero if cse has altered conditional jump insns | |
336 | in such a way that jump optimization should be redone. */ | |
337 | ||
338 | static int cse_jumps_altered; | |
339 | ||
340 | /* canon_hash stores 1 in do_not_record | |
341 | if it notices a reference to CC0, PC, or some other volatile | |
342 | subexpression. */ | |
343 | ||
344 | static int do_not_record; | |
345 | ||
346 | /* canon_hash stores 1 in hash_arg_in_memory | |
347 | if it notices a reference to memory within the expression being hashed. */ | |
348 | ||
349 | static int hash_arg_in_memory; | |
350 | ||
351 | /* canon_hash stores 1 in hash_arg_in_struct | |
352 | if it notices a reference to memory that's part of a structure. */ | |
353 | ||
354 | static int hash_arg_in_struct; | |
355 | ||
356 | /* The hash table contains buckets which are chains of `struct table_elt's, | |
357 | each recording one expression's information. | |
358 | That expression is in the `exp' field. | |
359 | ||
360 | Those elements with the same hash code are chained in both directions | |
361 | through the `next_same_hash' and `prev_same_hash' fields. | |
362 | ||
363 | Each set of expressions with equivalent values | |
364 | are on a two-way chain through the `next_same_value' | |
365 | and `prev_same_value' fields, and all point with | |
366 | the `first_same_value' field at the first element in | |
367 | that chain. The chain is in order of increasing cost. | |
368 | Each element's cost value is in its `cost' field. | |
369 | ||
370 | The `in_memory' field is nonzero for elements that | |
371 | involve any reference to memory. These elements are removed | |
372 | whenever a write is done to an unidentified location in memory. | |
373 | To be safe, we assume that a memory address is unidentified unless | |
374 | the address is either a symbol constant or a constant plus | |
375 | the frame pointer or argument pointer. | |
376 | ||
377 | The `in_struct' field is nonzero for elements that | |
378 | involve any reference to memory inside a structure or array. | |
379 | ||
380 | The `related_value' field is used to connect related expressions | |
381 | (that differ by adding an integer). | |
382 | The related expressions are chained in a circular fashion. | |
383 | `related_value' is zero for expressions for which this | |
384 | chain is not useful. | |
385 | ||
386 | The `cost' field stores the cost of this element's expression. | |
387 | ||
388 | The `is_const' flag is set if the element is a constant (including | |
389 | a fixed address). | |
390 | ||
391 | The `flag' field is used as a temporary during some search routines. | |
392 | ||
393 | The `mode' field is usually the same as GET_MODE (`exp'), but | |
394 | if `exp' is a CONST_INT and has no machine mode then the `mode' | |
395 | field is the mode it was being used as. Each constant is | |
396 | recorded separately for each mode it is used with. */ | |
397 | ||
398 | ||
399 | struct table_elt | |
400 | { | |
401 | rtx exp; | |
402 | struct table_elt *next_same_hash; | |
403 | struct table_elt *prev_same_hash; | |
404 | struct table_elt *next_same_value; | |
405 | struct table_elt *prev_same_value; | |
406 | struct table_elt *first_same_value; | |
407 | struct table_elt *related_value; | |
408 | int cost; | |
409 | enum machine_mode mode; | |
410 | char in_memory; | |
411 | char in_struct; | |
412 | char is_const; | |
413 | char flag; | |
414 | }; | |
415 | ||
416 | #define HASHBITS 16 | |
417 | ||
418 | /* We don't want a lot of buckets, because we rarely have very many | |
419 | things stored in the hash table, and a lot of buckets slows | |
420 | down a lot of loops that happen frequently. */ | |
421 | #define NBUCKETS 31 | |
422 | ||
423 | /* Compute hash code of X in mode M. Special-case case where X is a pseudo | |
424 | register (hard registers may require `do_not_record' to be set). */ | |
425 | ||
426 | #define HASH(X, M) \ | |
427 | (GET_CODE (X) == REG && REGNO (X) >= FIRST_PSEUDO_REGISTER \ | |
428 | ? ((((int) REG << 7) + reg_qty[REGNO (X)]) % NBUCKETS) \ | |
429 | : canon_hash (X, M) % NBUCKETS) | |
430 | ||
431 | /* Determine whether register number N is considered a fixed register for CSE. | |
432 | It is desirable to replace other regs with fixed regs, to reduce need for | |
433 | non-fixed hard regs. | |
434 | A reg wins if it is either the frame pointer or designated as fixed, | |
435 | but not if it is an overlapping register. */ | |
436 | #ifdef OVERLAPPING_REGNO_P | |
437 | #define FIXED_REGNO_P(N) \ | |
438 | (((N) == FRAME_POINTER_REGNUM || fixed_regs[N]) \ | |
439 | && ! OVERLAPPING_REGNO_P ((N))) | |
440 | #else | |
441 | #define FIXED_REGNO_P(N) \ | |
442 | ((N) == FRAME_POINTER_REGNUM || fixed_regs[N]) | |
443 | #endif | |
444 | ||
445 | /* Compute cost of X, as stored in the `cost' field of a table_elt. Fixed | |
446 | hard registers are the cheapest with a cost of 0. Next come pseudos | |
447 | with a cost of one and other hard registers with a cost of 2. Aside | |
448 | from these special cases, call `rtx_cost'. */ | |
449 | ||
450 | #define COST(X) \ | |
451 | (GET_CODE (X) == REG \ | |
452 | ? (REGNO (X) >= FIRST_PSEUDO_REGISTER ? 1 \ | |
453 | : (FIXED_REGNO_P (REGNO (X)) \ | |
454 | && REGNO_REG_CLASS (REGNO (X)) != NO_REGS) ? 0 \ | |
455 | : 2) \ | |
e5f6a288 | 456 | : rtx_cost (X, SET) * 2) |
7afe21cc RK |
457 | |
458 | /* Determine if the quantity number for register X represents a valid index | |
459 | into the `qty_...' variables. */ | |
460 | ||
461 | #define REGNO_QTY_VALID_P(N) (reg_qty[N] != (N)) | |
462 | ||
463 | static struct table_elt *table[NBUCKETS]; | |
464 | ||
465 | /* Chain of `struct table_elt's made so far for this function | |
466 | but currently removed from the table. */ | |
467 | ||
468 | static struct table_elt *free_element_chain; | |
469 | ||
470 | /* Number of `struct table_elt' structures made so far for this function. */ | |
471 | ||
472 | static int n_elements_made; | |
473 | ||
474 | /* Maximum value `n_elements_made' has had so far in this compilation | |
475 | for functions previously processed. */ | |
476 | ||
477 | static int max_elements_made; | |
478 | ||
479 | /* Surviving equivalence class when two equivalence classes are merged | |
480 | by recording the effects of a jump in the last insn. Zero if the | |
481 | last insn was not a conditional jump. */ | |
482 | ||
483 | static struct table_elt *last_jump_equiv_class; | |
484 | ||
485 | /* Set to the cost of a constant pool reference if one was found for a | |
486 | symbolic constant. If this was found, it means we should try to | |
487 | convert constants into constant pool entries if they don't fit in | |
488 | the insn. */ | |
489 | ||
490 | static int constant_pool_entries_cost; | |
491 | ||
492 | /* Bits describing what kind of values in memory must be invalidated | |
493 | for a particular instruction. If all three bits are zero, | |
494 | no memory refs need to be invalidated. Each bit is more powerful | |
495 | than the preceding ones, and if a bit is set then the preceding | |
496 | bits are also set. | |
497 | ||
498 | Here is how the bits are set: | |
499 | Pushing onto the stack invalidates only the stack pointer, | |
500 | writing at a fixed address invalidates only variable addresses, | |
501 | writing in a structure element at variable address | |
502 | invalidates all but scalar variables, | |
503 | and writing in anything else at variable address invalidates everything. */ | |
504 | ||
505 | struct write_data | |
506 | { | |
507 | int sp : 1; /* Invalidate stack pointer. */ | |
508 | int var : 1; /* Invalidate variable addresses. */ | |
509 | int nonscalar : 1; /* Invalidate all but scalar variables. */ | |
510 | int all : 1; /* Invalidate all memory refs. */ | |
511 | }; | |
512 | ||
513 | /* Nonzero if X has the form (PLUS frame-pointer integer). We check for | |
514 | virtual regs here because the simplify_*_operation routines are called | |
515 | by integrate.c, which is called before virtual register instantiation. */ | |
516 | ||
517 | #define FIXED_BASE_PLUS_P(X) \ | |
518 | ((X) == frame_pointer_rtx || (X) == arg_pointer_rtx \ | |
519 | || (X) == virtual_stack_vars_rtx \ | |
520 | || (X) == virtual_incoming_args_rtx \ | |
521 | || (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 1)) == CONST_INT \ | |
522 | && (XEXP (X, 0) == frame_pointer_rtx \ | |
523 | || XEXP (X, 0) == arg_pointer_rtx \ | |
524 | || XEXP (X, 0) == virtual_stack_vars_rtx \ | |
525 | || XEXP (X, 0) == virtual_incoming_args_rtx))) | |
526 | ||
6f90e075 JW |
527 | /* Similar, but also allows reference to the stack pointer. |
528 | ||
529 | This used to include FIXED_BASE_PLUS_P, however, we can't assume that | |
530 | arg_pointer_rtx by itself is nonzero, because on at least one machine, | |
531 | the i960, the arg pointer is zero when it is unused. */ | |
7afe21cc RK |
532 | |
533 | #define NONZERO_BASE_PLUS_P(X) \ | |
6f90e075 JW |
534 | ((X) == frame_pointer_rtx \ |
535 | || (X) == virtual_stack_vars_rtx \ | |
536 | || (X) == virtual_incoming_args_rtx \ | |
537 | || (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 1)) == CONST_INT \ | |
538 | && (XEXP (X, 0) == frame_pointer_rtx \ | |
539 | || XEXP (X, 0) == arg_pointer_rtx \ | |
540 | || XEXP (X, 0) == virtual_stack_vars_rtx \ | |
541 | || XEXP (X, 0) == virtual_incoming_args_rtx)) \ | |
7afe21cc RK |
542 | || (X) == stack_pointer_rtx \ |
543 | || (X) == virtual_stack_dynamic_rtx \ | |
544 | || (X) == virtual_outgoing_args_rtx \ | |
545 | || (GET_CODE (X) == PLUS && GET_CODE (XEXP (X, 1)) == CONST_INT \ | |
546 | && (XEXP (X, 0) == stack_pointer_rtx \ | |
547 | || XEXP (X, 0) == virtual_stack_dynamic_rtx \ | |
548 | || XEXP (X, 0) == virtual_outgoing_args_rtx))) | |
549 | ||
550 | static struct table_elt *lookup (); | |
551 | static void free_element (); | |
552 | ||
553 | static int insert_regs (); | |
554 | static void rehash_using_reg (); | |
555 | static void remove_invalid_refs (); | |
556 | static int exp_equiv_p (); | |
557 | int refers_to_p (); | |
558 | int refers_to_mem_p (); | |
559 | static void invalidate_from_clobbers (); | |
560 | static int safe_hash (); | |
561 | static int canon_hash (); | |
562 | static rtx fold_rtx (); | |
563 | static rtx equiv_constant (); | |
564 | static void record_jump_cond (); | |
565 | static void note_mem_written (); | |
566 | static int cse_rtx_addr_varies_p (); | |
567 | static enum rtx_code find_comparison_args (); | |
568 | static void cse_insn (); | |
569 | static void cse_set_around_loop (); | |
570 | \f | |
571 | /* Return an estimate of the cost of computing rtx X. | |
572 | One use is in cse, to decide which expression to keep in the hash table. | |
573 | Another is in rtl generation, to pick the cheapest way to multiply. | |
574 | Other uses like the latter are expected in the future. */ | |
575 | ||
576 | /* Return the right cost to give to an operation | |
577 | to make the cost of the corresponding register-to-register instruction | |
578 | N times that of a fast register-to-register instruction. */ | |
579 | ||
580 | #define COSTS_N_INSNS(N) ((N) * 4 - 2) | |
581 | ||
582 | int | |
e5f6a288 | 583 | rtx_cost (x, outer_code) |
7afe21cc | 584 | rtx x; |
e5f6a288 | 585 | enum rtx_code outer_code; |
7afe21cc RK |
586 | { |
587 | register int i, j; | |
588 | register enum rtx_code code; | |
589 | register char *fmt; | |
590 | register int total; | |
591 | ||
592 | if (x == 0) | |
593 | return 0; | |
594 | ||
595 | /* Compute the default costs of certain things. | |
596 | Note that RTX_COSTS can override the defaults. */ | |
597 | ||
598 | code = GET_CODE (x); | |
599 | switch (code) | |
600 | { | |
601 | case MULT: | |
602 | /* Count multiplication by 2**n as a shift, | |
603 | because if we are considering it, we would output it as a shift. */ | |
604 | if (GET_CODE (XEXP (x, 1)) == CONST_INT | |
605 | && exact_log2 (INTVAL (XEXP (x, 1))) >= 0) | |
606 | total = 2; | |
607 | else | |
608 | total = COSTS_N_INSNS (5); | |
609 | break; | |
610 | case DIV: | |
611 | case UDIV: | |
612 | case MOD: | |
613 | case UMOD: | |
614 | total = COSTS_N_INSNS (7); | |
615 | break; | |
616 | case USE: | |
617 | /* Used in loop.c and combine.c as a marker. */ | |
618 | total = 0; | |
619 | break; | |
538b78e7 RS |
620 | case ASM_OPERANDS: |
621 | /* We don't want these to be used in substitutions because | |
622 | we have no way of validating the resulting insn. So assign | |
623 | anything containing an ASM_OPERANDS a very high cost. */ | |
624 | total = 1000; | |
625 | break; | |
7afe21cc RK |
626 | default: |
627 | total = 2; | |
628 | } | |
629 | ||
630 | switch (code) | |
631 | { | |
632 | case REG: | |
633 | return 1; | |
634 | case SUBREG: | |
fc3ffe83 RK |
635 | /* If we can't tie these modes, make this expensive. The larger |
636 | the mode, the more expensive it is. */ | |
637 | if (! MODES_TIEABLE_P (GET_MODE (x), GET_MODE (SUBREG_REG (x)))) | |
638 | return COSTS_N_INSNS (2 | |
639 | + GET_MODE_SIZE (GET_MODE (x)) / UNITS_PER_WORD); | |
7afe21cc RK |
640 | return 2; |
641 | #ifdef RTX_COSTS | |
e5f6a288 | 642 | RTX_COSTS (x, code, outer_code); |
7afe21cc | 643 | #endif |
e5f6a288 | 644 | CONST_COSTS (x, code, outer_code); |
7afe21cc RK |
645 | } |
646 | ||
647 | /* Sum the costs of the sub-rtx's, plus cost of this operation, | |
648 | which is already in total. */ | |
649 | ||
650 | fmt = GET_RTX_FORMAT (code); | |
651 | for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) | |
652 | if (fmt[i] == 'e') | |
e5f6a288 | 653 | total += rtx_cost (XEXP (x, i), code); |
7afe21cc RK |
654 | else if (fmt[i] == 'E') |
655 | for (j = 0; j < XVECLEN (x, i); j++) | |
e5f6a288 | 656 | total += rtx_cost (XVECEXP (x, i, j), code); |
7afe21cc RK |
657 | |
658 | return total; | |
659 | } | |
660 | \f | |
661 | /* Clear the hash table and initialize each register with its own quantity, | |
662 | for a new basic block. */ | |
663 | ||
664 | static void | |
665 | new_basic_block () | |
666 | { | |
667 | register int i; | |
668 | ||
669 | next_qty = max_reg; | |
670 | ||
671 | bzero (reg_tick, max_reg * sizeof (int)); | |
672 | ||
673 | bcopy (all_minus_one, reg_in_table, max_reg * sizeof (int)); | |
674 | bcopy (consec_ints, reg_qty, max_reg * sizeof (int)); | |
675 | CLEAR_HARD_REG_SET (hard_regs_in_table); | |
676 | ||
677 | /* The per-quantity values used to be initialized here, but it is | |
678 | much faster to initialize each as it is made in `make_new_qty'. */ | |
679 | ||
680 | for (i = 0; i < NBUCKETS; i++) | |
681 | { | |
682 | register struct table_elt *this, *next; | |
683 | for (this = table[i]; this; this = next) | |
684 | { | |
685 | next = this->next_same_hash; | |
686 | free_element (this); | |
687 | } | |
688 | } | |
689 | ||
690 | bzero (table, sizeof table); | |
691 | ||
692 | prev_insn = 0; | |
693 | ||
694 | #ifdef HAVE_cc0 | |
695 | prev_insn_cc0 = 0; | |
696 | #endif | |
697 | } | |
698 | ||
699 | /* Say that register REG contains a quantity not in any register before | |
700 | and initialize that quantity. */ | |
701 | ||
702 | static void | |
703 | make_new_qty (reg) | |
704 | register int reg; | |
705 | { | |
706 | register int q; | |
707 | ||
708 | if (next_qty >= max_qty) | |
709 | abort (); | |
710 | ||
711 | q = reg_qty[reg] = next_qty++; | |
712 | qty_first_reg[q] = reg; | |
713 | qty_last_reg[q] = reg; | |
714 | qty_const[q] = qty_const_insn[q] = 0; | |
715 | qty_comparison_code[q] = UNKNOWN; | |
716 | ||
717 | reg_next_eqv[reg] = reg_prev_eqv[reg] = -1; | |
718 | } | |
719 | ||
720 | /* Make reg NEW equivalent to reg OLD. | |
721 | OLD is not changing; NEW is. */ | |
722 | ||
723 | static void | |
724 | make_regs_eqv (new, old) | |
725 | register int new, old; | |
726 | { | |
727 | register int lastr, firstr; | |
728 | register int q = reg_qty[old]; | |
729 | ||
730 | /* Nothing should become eqv until it has a "non-invalid" qty number. */ | |
731 | if (! REGNO_QTY_VALID_P (old)) | |
732 | abort (); | |
733 | ||
734 | reg_qty[new] = q; | |
735 | firstr = qty_first_reg[q]; | |
736 | lastr = qty_last_reg[q]; | |
737 | ||
738 | /* Prefer fixed hard registers to anything. Prefer pseudo regs to other | |
739 | hard regs. Among pseudos, if NEW will live longer than any other reg | |
740 | of the same qty, and that is beyond the current basic block, | |
741 | make it the new canonical replacement for this qty. */ | |
742 | if (! (firstr < FIRST_PSEUDO_REGISTER && FIXED_REGNO_P (firstr)) | |
743 | /* Certain fixed registers might be of the class NO_REGS. This means | |
744 | that not only can they not be allocated by the compiler, but | |
830a38ee | 745 | they cannot be used in substitutions or canonicalizations |
7afe21cc RK |
746 | either. */ |
747 | && (new >= FIRST_PSEUDO_REGISTER || REGNO_REG_CLASS (new) != NO_REGS) | |
748 | && ((new < FIRST_PSEUDO_REGISTER && FIXED_REGNO_P (new)) | |
749 | || (new >= FIRST_PSEUDO_REGISTER | |
750 | && (firstr < FIRST_PSEUDO_REGISTER | |
751 | || ((uid_cuid[regno_last_uid[new]] > cse_basic_block_end | |
752 | || (uid_cuid[regno_first_uid[new]] | |
753 | < cse_basic_block_start)) | |
754 | && (uid_cuid[regno_last_uid[new]] | |
755 | > uid_cuid[regno_last_uid[firstr]])))))) | |
756 | { | |
757 | reg_prev_eqv[firstr] = new; | |
758 | reg_next_eqv[new] = firstr; | |
759 | reg_prev_eqv[new] = -1; | |
760 | qty_first_reg[q] = new; | |
761 | } | |
762 | else | |
763 | { | |
764 | /* If NEW is a hard reg (known to be non-fixed), insert at end. | |
765 | Otherwise, insert before any non-fixed hard regs that are at the | |
766 | end. Registers of class NO_REGS cannot be used as an | |
767 | equivalent for anything. */ | |
768 | while (lastr < FIRST_PSEUDO_REGISTER && reg_prev_eqv[lastr] >= 0 | |
769 | && (REGNO_REG_CLASS (lastr) == NO_REGS || ! FIXED_REGNO_P (lastr)) | |
770 | && new >= FIRST_PSEUDO_REGISTER) | |
771 | lastr = reg_prev_eqv[lastr]; | |
772 | reg_next_eqv[new] = reg_next_eqv[lastr]; | |
773 | if (reg_next_eqv[lastr] >= 0) | |
774 | reg_prev_eqv[reg_next_eqv[lastr]] = new; | |
775 | else | |
776 | qty_last_reg[q] = new; | |
777 | reg_next_eqv[lastr] = new; | |
778 | reg_prev_eqv[new] = lastr; | |
779 | } | |
780 | } | |
781 | ||
782 | /* Remove REG from its equivalence class. */ | |
783 | ||
784 | static void | |
785 | delete_reg_equiv (reg) | |
786 | register int reg; | |
787 | { | |
788 | register int n = reg_next_eqv[reg]; | |
789 | register int p = reg_prev_eqv[reg]; | |
790 | register int q = reg_qty[reg]; | |
791 | ||
792 | /* If invalid, do nothing. N and P above are undefined in that case. */ | |
793 | if (q == reg) | |
794 | return; | |
795 | ||
796 | if (n != -1) | |
797 | reg_prev_eqv[n] = p; | |
798 | else | |
799 | qty_last_reg[q] = p; | |
800 | if (p != -1) | |
801 | reg_next_eqv[p] = n; | |
802 | else | |
803 | qty_first_reg[q] = n; | |
804 | ||
805 | reg_qty[reg] = reg; | |
806 | } | |
807 | ||
808 | /* Remove any invalid expressions from the hash table | |
809 | that refer to any of the registers contained in expression X. | |
810 | ||
811 | Make sure that newly inserted references to those registers | |
812 | as subexpressions will be considered valid. | |
813 | ||
814 | mention_regs is not called when a register itself | |
815 | is being stored in the table. | |
816 | ||
817 | Return 1 if we have done something that may have changed the hash code | |
818 | of X. */ | |
819 | ||
820 | static int | |
821 | mention_regs (x) | |
822 | rtx x; | |
823 | { | |
824 | register enum rtx_code code; | |
825 | register int i, j; | |
826 | register char *fmt; | |
827 | register int changed = 0; | |
828 | ||
829 | if (x == 0) | |
e5f6a288 | 830 | return 0; |
7afe21cc RK |
831 | |
832 | code = GET_CODE (x); | |
833 | if (code == REG) | |
834 | { | |
835 | register int regno = REGNO (x); | |
836 | register int endregno | |
837 | = regno + (regno >= FIRST_PSEUDO_REGISTER ? 1 | |
838 | : HARD_REGNO_NREGS (regno, GET_MODE (x))); | |
839 | int i; | |
840 | ||
841 | for (i = regno; i < endregno; i++) | |
842 | { | |
843 | if (reg_in_table[i] >= 0 && reg_in_table[i] != reg_tick[i]) | |
844 | remove_invalid_refs (i); | |
845 | ||
846 | reg_in_table[i] = reg_tick[i]; | |
847 | } | |
848 | ||
849 | return 0; | |
850 | } | |
851 | ||
852 | /* If X is a comparison or a COMPARE and either operand is a register | |
853 | that does not have a quantity, give it one. This is so that a later | |
854 | call to record_jump_equiv won't cause X to be assigned a different | |
855 | hash code and not found in the table after that call. | |
856 | ||
857 | It is not necessary to do this here, since rehash_using_reg can | |
858 | fix up the table later, but doing this here eliminates the need to | |
859 | call that expensive function in the most common case where the only | |
860 | use of the register is in the comparison. */ | |
861 | ||
862 | if (code == COMPARE || GET_RTX_CLASS (code) == '<') | |
863 | { | |
864 | if (GET_CODE (XEXP (x, 0)) == REG | |
865 | && ! REGNO_QTY_VALID_P (REGNO (XEXP (x, 0)))) | |
866 | if (insert_regs (XEXP (x, 0), 0, 0)) | |
867 | { | |
868 | rehash_using_reg (XEXP (x, 0)); | |
869 | changed = 1; | |
870 | } | |
871 | ||
872 | if (GET_CODE (XEXP (x, 1)) == REG | |
873 | && ! REGNO_QTY_VALID_P (REGNO (XEXP (x, 1)))) | |
874 | if (insert_regs (XEXP (x, 1), 0, 0)) | |
875 | { | |
876 | rehash_using_reg (XEXP (x, 1)); | |
877 | changed = 1; | |
878 | } | |
879 | } | |
880 | ||
881 | fmt = GET_RTX_FORMAT (code); | |
882 | for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) | |
883 | if (fmt[i] == 'e') | |
884 | changed |= mention_regs (XEXP (x, i)); | |
885 | else if (fmt[i] == 'E') | |
886 | for (j = 0; j < XVECLEN (x, i); j++) | |
887 | changed |= mention_regs (XVECEXP (x, i, j)); | |
888 | ||
889 | return changed; | |
890 | } | |
891 | ||
892 | /* Update the register quantities for inserting X into the hash table | |
893 | with a value equivalent to CLASSP. | |
894 | (If the class does not contain a REG, it is irrelevant.) | |
895 | If MODIFIED is nonzero, X is a destination; it is being modified. | |
896 | Note that delete_reg_equiv should be called on a register | |
897 | before insert_regs is done on that register with MODIFIED != 0. | |
898 | ||
899 | Nonzero value means that elements of reg_qty have changed | |
900 | so X's hash code may be different. */ | |
901 | ||
902 | static int | |
903 | insert_regs (x, classp, modified) | |
904 | rtx x; | |
905 | struct table_elt *classp; | |
906 | int modified; | |
907 | { | |
908 | if (GET_CODE (x) == REG) | |
909 | { | |
910 | register int regno = REGNO (x); | |
911 | ||
912 | if (modified | |
913 | || ! (REGNO_QTY_VALID_P (regno) | |
914 | && qty_mode[reg_qty[regno]] == GET_MODE (x))) | |
915 | { | |
916 | if (classp) | |
917 | for (classp = classp->first_same_value; | |
918 | classp != 0; | |
919 | classp = classp->next_same_value) | |
920 | if (GET_CODE (classp->exp) == REG | |
921 | && GET_MODE (classp->exp) == GET_MODE (x)) | |
922 | { | |
923 | make_regs_eqv (regno, REGNO (classp->exp)); | |
924 | return 1; | |
925 | } | |
926 | ||
927 | make_new_qty (regno); | |
928 | qty_mode[reg_qty[regno]] = GET_MODE (x); | |
929 | return 1; | |
930 | } | |
931 | } | |
932 | else | |
933 | return mention_regs (x); | |
934 | } | |
935 | \f | |
936 | /* Look in or update the hash table. */ | |
937 | ||
938 | /* Put the element ELT on the list of free elements. */ | |
939 | ||
940 | static void | |
941 | free_element (elt) | |
942 | struct table_elt *elt; | |
943 | { | |
944 | elt->next_same_hash = free_element_chain; | |
945 | free_element_chain = elt; | |
946 | } | |
947 | ||
948 | /* Return an element that is free for use. */ | |
949 | ||
950 | static struct table_elt * | |
951 | get_element () | |
952 | { | |
953 | struct table_elt *elt = free_element_chain; | |
954 | if (elt) | |
955 | { | |
956 | free_element_chain = elt->next_same_hash; | |
957 | return elt; | |
958 | } | |
959 | n_elements_made++; | |
960 | return (struct table_elt *) oballoc (sizeof (struct table_elt)); | |
961 | } | |
962 | ||
963 | /* Remove table element ELT from use in the table. | |
964 | HASH is its hash code, made using the HASH macro. | |
965 | It's an argument because often that is known in advance | |
966 | and we save much time not recomputing it. */ | |
967 | ||
968 | static void | |
969 | remove_from_table (elt, hash) | |
970 | register struct table_elt *elt; | |
971 | int hash; | |
972 | { | |
973 | if (elt == 0) | |
974 | return; | |
975 | ||
976 | /* Mark this element as removed. See cse_insn. */ | |
977 | elt->first_same_value = 0; | |
978 | ||
979 | /* Remove the table element from its equivalence class. */ | |
980 | ||
981 | { | |
982 | register struct table_elt *prev = elt->prev_same_value; | |
983 | register struct table_elt *next = elt->next_same_value; | |
984 | ||
985 | if (next) next->prev_same_value = prev; | |
986 | ||
987 | if (prev) | |
988 | prev->next_same_value = next; | |
989 | else | |
990 | { | |
991 | register struct table_elt *newfirst = next; | |
992 | while (next) | |
993 | { | |
994 | next->first_same_value = newfirst; | |
995 | next = next->next_same_value; | |
996 | } | |
997 | } | |
998 | } | |
999 | ||
1000 | /* Remove the table element from its hash bucket. */ | |
1001 | ||
1002 | { | |
1003 | register struct table_elt *prev = elt->prev_same_hash; | |
1004 | register struct table_elt *next = elt->next_same_hash; | |
1005 | ||
1006 | if (next) next->prev_same_hash = prev; | |
1007 | ||
1008 | if (prev) | |
1009 | prev->next_same_hash = next; | |
1010 | else if (table[hash] == elt) | |
1011 | table[hash] = next; | |
1012 | else | |
1013 | { | |
1014 | /* This entry is not in the proper hash bucket. This can happen | |
1015 | when two classes were merged by `merge_equiv_classes'. Search | |
1016 | for the hash bucket that it heads. This happens only very | |
1017 | rarely, so the cost is acceptable. */ | |
1018 | for (hash = 0; hash < NBUCKETS; hash++) | |
1019 | if (table[hash] == elt) | |
1020 | table[hash] = next; | |
1021 | } | |
1022 | } | |
1023 | ||
1024 | /* Remove the table element from its related-value circular chain. */ | |
1025 | ||
1026 | if (elt->related_value != 0 && elt->related_value != elt) | |
1027 | { | |
1028 | register struct table_elt *p = elt->related_value; | |
1029 | while (p->related_value != elt) | |
1030 | p = p->related_value; | |
1031 | p->related_value = elt->related_value; | |
1032 | if (p->related_value == p) | |
1033 | p->related_value = 0; | |
1034 | } | |
1035 | ||
1036 | free_element (elt); | |
1037 | } | |
1038 | ||
1039 | /* Look up X in the hash table and return its table element, | |
1040 | or 0 if X is not in the table. | |
1041 | ||
1042 | MODE is the machine-mode of X, or if X is an integer constant | |
1043 | with VOIDmode then MODE is the mode with which X will be used. | |
1044 | ||
1045 | Here we are satisfied to find an expression whose tree structure | |
1046 | looks like X. */ | |
1047 | ||
1048 | static struct table_elt * | |
1049 | lookup (x, hash, mode) | |
1050 | rtx x; | |
1051 | int hash; | |
1052 | enum machine_mode mode; | |
1053 | { | |
1054 | register struct table_elt *p; | |
1055 | ||
1056 | for (p = table[hash]; p; p = p->next_same_hash) | |
1057 | if (mode == p->mode && ((x == p->exp && GET_CODE (x) == REG) | |
1058 | || exp_equiv_p (x, p->exp, GET_CODE (x) != REG, 0))) | |
1059 | return p; | |
1060 | ||
1061 | return 0; | |
1062 | } | |
1063 | ||
1064 | /* Like `lookup' but don't care whether the table element uses invalid regs. | |
1065 | Also ignore discrepancies in the machine mode of a register. */ | |
1066 | ||
1067 | static struct table_elt * | |
1068 | lookup_for_remove (x, hash, mode) | |
1069 | rtx x; | |
1070 | int hash; | |
1071 | enum machine_mode mode; | |
1072 | { | |
1073 | register struct table_elt *p; | |
1074 | ||
1075 | if (GET_CODE (x) == REG) | |
1076 | { | |
1077 | int regno = REGNO (x); | |
1078 | /* Don't check the machine mode when comparing registers; | |
1079 | invalidating (REG:SI 0) also invalidates (REG:DF 0). */ | |
1080 | for (p = table[hash]; p; p = p->next_same_hash) | |
1081 | if (GET_CODE (p->exp) == REG | |
1082 | && REGNO (p->exp) == regno) | |
1083 | return p; | |
1084 | } | |
1085 | else | |
1086 | { | |
1087 | for (p = table[hash]; p; p = p->next_same_hash) | |
1088 | if (mode == p->mode && (x == p->exp || exp_equiv_p (x, p->exp, 0, 0))) | |
1089 | return p; | |
1090 | } | |
1091 | ||
1092 | return 0; | |
1093 | } | |
1094 | ||
1095 | /* Look for an expression equivalent to X and with code CODE. | |
1096 | If one is found, return that expression. */ | |
1097 | ||
1098 | static rtx | |
1099 | lookup_as_function (x, code) | |
1100 | rtx x; | |
1101 | enum rtx_code code; | |
1102 | { | |
1103 | register struct table_elt *p = lookup (x, safe_hash (x, VOIDmode) % NBUCKETS, | |
1104 | GET_MODE (x)); | |
1105 | if (p == 0) | |
1106 | return 0; | |
1107 | ||
1108 | for (p = p->first_same_value; p; p = p->next_same_value) | |
1109 | { | |
1110 | if (GET_CODE (p->exp) == code | |
1111 | /* Make sure this is a valid entry in the table. */ | |
1112 | && exp_equiv_p (p->exp, p->exp, 1, 0)) | |
1113 | return p->exp; | |
1114 | } | |
1115 | ||
1116 | return 0; | |
1117 | } | |
1118 | ||
1119 | /* Insert X in the hash table, assuming HASH is its hash code | |
1120 | and CLASSP is an element of the class it should go in | |
1121 | (or 0 if a new class should be made). | |
1122 | It is inserted at the proper position to keep the class in | |
1123 | the order cheapest first. | |
1124 | ||
1125 | MODE is the machine-mode of X, or if X is an integer constant | |
1126 | with VOIDmode then MODE is the mode with which X will be used. | |
1127 | ||
1128 | For elements of equal cheapness, the most recent one | |
1129 | goes in front, except that the first element in the list | |
1130 | remains first unless a cheaper element is added. The order of | |
1131 | pseudo-registers does not matter, as canon_reg will be called to | |
830a38ee | 1132 | find the cheapest when a register is retrieved from the table. |
7afe21cc RK |
1133 | |
1134 | The in_memory field in the hash table element is set to 0. | |
1135 | The caller must set it nonzero if appropriate. | |
1136 | ||
1137 | You should call insert_regs (X, CLASSP, MODIFY) before calling here, | |
1138 | and if insert_regs returns a nonzero value | |
1139 | you must then recompute its hash code before calling here. | |
1140 | ||
1141 | If necessary, update table showing constant values of quantities. */ | |
1142 | ||
1143 | #define CHEAPER(X,Y) ((X)->cost < (Y)->cost) | |
1144 | ||
1145 | static struct table_elt * | |
1146 | insert (x, classp, hash, mode) | |
1147 | register rtx x; | |
1148 | register struct table_elt *classp; | |
1149 | int hash; | |
1150 | enum machine_mode mode; | |
1151 | { | |
1152 | register struct table_elt *elt; | |
1153 | ||
1154 | /* If X is a register and we haven't made a quantity for it, | |
1155 | something is wrong. */ | |
1156 | if (GET_CODE (x) == REG && ! REGNO_QTY_VALID_P (REGNO (x))) | |
1157 | abort (); | |
1158 | ||
1159 | /* If X is a hard register, show it is being put in the table. */ | |
1160 | if (GET_CODE (x) == REG && REGNO (x) < FIRST_PSEUDO_REGISTER) | |
1161 | { | |
1162 | int regno = REGNO (x); | |
1163 | int endregno = regno + HARD_REGNO_NREGS (regno, GET_MODE (x)); | |
1164 | int i; | |
1165 | ||
1166 | for (i = regno; i < endregno; i++) | |
1167 | SET_HARD_REG_BIT (hard_regs_in_table, i); | |
1168 | } | |
1169 | ||
1170 | ||
1171 | /* Put an element for X into the right hash bucket. */ | |
1172 | ||
1173 | elt = get_element (); | |
1174 | elt->exp = x; | |
1175 | elt->cost = COST (x); | |
1176 | elt->next_same_value = 0; | |
1177 | elt->prev_same_value = 0; | |
1178 | elt->next_same_hash = table[hash]; | |
1179 | elt->prev_same_hash = 0; | |
1180 | elt->related_value = 0; | |
1181 | elt->in_memory = 0; | |
1182 | elt->mode = mode; | |
1183 | elt->is_const = (CONSTANT_P (x) | |
1184 | /* GNU C++ takes advantage of this for `this' | |
1185 | (and other const values). */ | |
1186 | || (RTX_UNCHANGING_P (x) | |
1187 | && GET_CODE (x) == REG | |
1188 | && REGNO (x) >= FIRST_PSEUDO_REGISTER) | |
1189 | || FIXED_BASE_PLUS_P (x)); | |
1190 | ||
1191 | if (table[hash]) | |
1192 | table[hash]->prev_same_hash = elt; | |
1193 | table[hash] = elt; | |
1194 | ||
1195 | /* Put it into the proper value-class. */ | |
1196 | if (classp) | |
1197 | { | |
1198 | classp = classp->first_same_value; | |
1199 | if (CHEAPER (elt, classp)) | |
1200 | /* Insert at the head of the class */ | |
1201 | { | |
1202 | register struct table_elt *p; | |
1203 | elt->next_same_value = classp; | |
1204 | classp->prev_same_value = elt; | |
1205 | elt->first_same_value = elt; | |
1206 | ||
1207 | for (p = classp; p; p = p->next_same_value) | |
1208 | p->first_same_value = elt; | |
1209 | } | |
1210 | else | |
1211 | { | |
1212 | /* Insert not at head of the class. */ | |
1213 | /* Put it after the last element cheaper than X. */ | |
1214 | register struct table_elt *p, *next; | |
1215 | for (p = classp; (next = p->next_same_value) && CHEAPER (next, elt); | |
1216 | p = next); | |
1217 | /* Put it after P and before NEXT. */ | |
1218 | elt->next_same_value = next; | |
1219 | if (next) | |
1220 | next->prev_same_value = elt; | |
1221 | elt->prev_same_value = p; | |
1222 | p->next_same_value = elt; | |
1223 | elt->first_same_value = classp; | |
1224 | } | |
1225 | } | |
1226 | else | |
1227 | elt->first_same_value = elt; | |
1228 | ||
1229 | /* If this is a constant being set equivalent to a register or a register | |
1230 | being set equivalent to a constant, note the constant equivalence. | |
1231 | ||
1232 | If this is a constant, it cannot be equivalent to a different constant, | |
1233 | and a constant is the only thing that can be cheaper than a register. So | |
1234 | we know the register is the head of the class (before the constant was | |
1235 | inserted). | |
1236 | ||
1237 | If this is a register that is not already known equivalent to a | |
1238 | constant, we must check the entire class. | |
1239 | ||
1240 | If this is a register that is already known equivalent to an insn, | |
1241 | update `qty_const_insn' to show that `this_insn' is the latest | |
1242 | insn making that quantity equivalent to the constant. */ | |
1243 | ||
1244 | if (elt->is_const && classp && GET_CODE (classp->exp) == REG) | |
1245 | { | |
1246 | qty_const[reg_qty[REGNO (classp->exp)]] | |
1247 | = gen_lowpart_if_possible (qty_mode[reg_qty[REGNO (classp->exp)]], x); | |
1248 | qty_const_insn[reg_qty[REGNO (classp->exp)]] = this_insn; | |
1249 | } | |
1250 | ||
1251 | else if (GET_CODE (x) == REG && classp && ! qty_const[reg_qty[REGNO (x)]]) | |
1252 | { | |
1253 | register struct table_elt *p; | |
1254 | ||
1255 | for (p = classp; p != 0; p = p->next_same_value) | |
1256 | { | |
1257 | if (p->is_const) | |
1258 | { | |
1259 | qty_const[reg_qty[REGNO (x)]] | |
1260 | = gen_lowpart_if_possible (GET_MODE (x), p->exp); | |
1261 | qty_const_insn[reg_qty[REGNO (x)]] = this_insn; | |
1262 | break; | |
1263 | } | |
1264 | } | |
1265 | } | |
1266 | ||
1267 | else if (GET_CODE (x) == REG && qty_const[reg_qty[REGNO (x)]] | |
1268 | && GET_MODE (x) == qty_mode[reg_qty[REGNO (x)]]) | |
1269 | qty_const_insn[reg_qty[REGNO (x)]] = this_insn; | |
1270 | ||
1271 | /* If this is a constant with symbolic value, | |
1272 | and it has a term with an explicit integer value, | |
1273 | link it up with related expressions. */ | |
1274 | if (GET_CODE (x) == CONST) | |
1275 | { | |
1276 | rtx subexp = get_related_value (x); | |
1277 | int subhash; | |
1278 | struct table_elt *subelt, *subelt_prev; | |
1279 | ||
1280 | if (subexp != 0) | |
1281 | { | |
1282 | /* Get the integer-free subexpression in the hash table. */ | |
1283 | subhash = safe_hash (subexp, mode) % NBUCKETS; | |
1284 | subelt = lookup (subexp, subhash, mode); | |
1285 | if (subelt == 0) | |
1286 | subelt = insert (subexp, 0, subhash, mode); | |
1287 | /* Initialize SUBELT's circular chain if it has none. */ | |
1288 | if (subelt->related_value == 0) | |
1289 | subelt->related_value = subelt; | |
1290 | /* Find the element in the circular chain that precedes SUBELT. */ | |
1291 | subelt_prev = subelt; | |
1292 | while (subelt_prev->related_value != subelt) | |
1293 | subelt_prev = subelt_prev->related_value; | |
1294 | /* Put new ELT into SUBELT's circular chain just before SUBELT. | |
1295 | This way the element that follows SUBELT is the oldest one. */ | |
1296 | elt->related_value = subelt_prev->related_value; | |
1297 | subelt_prev->related_value = elt; | |
1298 | } | |
1299 | } | |
1300 | ||
1301 | return elt; | |
1302 | } | |
1303 | \f | |
1304 | /* Given two equivalence classes, CLASS1 and CLASS2, put all the entries from | |
1305 | CLASS2 into CLASS1. This is done when we have reached an insn which makes | |
1306 | the two classes equivalent. | |
1307 | ||
1308 | CLASS1 will be the surviving class; CLASS2 should not be used after this | |
1309 | call. | |
1310 | ||
1311 | Any invalid entries in CLASS2 will not be copied. */ | |
1312 | ||
1313 | static void | |
1314 | merge_equiv_classes (class1, class2) | |
1315 | struct table_elt *class1, *class2; | |
1316 | { | |
1317 | struct table_elt *elt, *next, *new; | |
1318 | ||
1319 | /* Ensure we start with the head of the classes. */ | |
1320 | class1 = class1->first_same_value; | |
1321 | class2 = class2->first_same_value; | |
1322 | ||
1323 | /* If they were already equal, forget it. */ | |
1324 | if (class1 == class2) | |
1325 | return; | |
1326 | ||
1327 | for (elt = class2; elt; elt = next) | |
1328 | { | |
1329 | int hash; | |
1330 | rtx exp = elt->exp; | |
1331 | enum machine_mode mode = elt->mode; | |
1332 | ||
1333 | next = elt->next_same_value; | |
1334 | ||
1335 | /* Remove old entry, make a new one in CLASS1's class. | |
1336 | Don't do this for invalid entries as we cannot find their | |
1337 | hash code (it also isn't necessary). */ | |
1338 | if (GET_CODE (exp) == REG || exp_equiv_p (exp, exp, 1, 0)) | |
1339 | { | |
1340 | hash_arg_in_memory = 0; | |
1341 | hash_arg_in_struct = 0; | |
1342 | hash = HASH (exp, mode); | |
1343 | ||
1344 | if (GET_CODE (exp) == REG) | |
1345 | delete_reg_equiv (REGNO (exp)); | |
1346 | ||
1347 | remove_from_table (elt, hash); | |
1348 | ||
1349 | if (insert_regs (exp, class1, 0)) | |
1350 | hash = HASH (exp, mode); | |
1351 | new = insert (exp, class1, hash, mode); | |
1352 | new->in_memory = hash_arg_in_memory; | |
1353 | new->in_struct = hash_arg_in_struct; | |
1354 | } | |
1355 | } | |
1356 | } | |
1357 | \f | |
1358 | /* Remove from the hash table, or mark as invalid, | |
1359 | all expressions whose values could be altered by storing in X. | |
1360 | X is a register, a subreg, or a memory reference with nonvarying address | |
1361 | (because, when a memory reference with a varying address is stored in, | |
1362 | all memory references are removed by invalidate_memory | |
1363 | so specific invalidation is superfluous). | |
1364 | ||
1365 | A nonvarying address may be just a register or just | |
1366 | a symbol reference, or it may be either of those plus | |
1367 | a numeric offset. */ | |
1368 | ||
1369 | static void | |
1370 | invalidate (x) | |
1371 | rtx x; | |
1372 | { | |
1373 | register int i; | |
1374 | register struct table_elt *p; | |
1375 | register rtx base; | |
1376 | register int start, end; | |
1377 | ||
1378 | /* If X is a register, dependencies on its contents | |
1379 | are recorded through the qty number mechanism. | |
1380 | Just change the qty number of the register, | |
1381 | mark it as invalid for expressions that refer to it, | |
1382 | and remove it itself. */ | |
1383 | ||
1384 | if (GET_CODE (x) == REG) | |
1385 | { | |
1386 | register int regno = REGNO (x); | |
1387 | register int hash = HASH (x, GET_MODE (x)); | |
1388 | ||
1389 | /* Remove REGNO from any quantity list it might be on and indicate | |
1390 | that it's value might have changed. If it is a pseudo, remove its | |
1391 | entry from the hash table. | |
1392 | ||
1393 | For a hard register, we do the first two actions above for any | |
1394 | additional hard registers corresponding to X. Then, if any of these | |
1395 | registers are in the table, we must remove any REG entries that | |
1396 | overlap these registers. */ | |
1397 | ||
1398 | delete_reg_equiv (regno); | |
1399 | reg_tick[regno]++; | |
1400 | ||
1401 | if (regno >= FIRST_PSEUDO_REGISTER) | |
1402 | remove_from_table (lookup_for_remove (x, hash, GET_MODE (x)), hash); | |
1403 | else | |
1404 | { | |
1405 | int in_table = TEST_HARD_REG_BIT (hard_regs_in_table, regno); | |
1406 | int endregno = regno + HARD_REGNO_NREGS (regno, GET_MODE (x)); | |
1407 | int tregno, tendregno; | |
1408 | register struct table_elt *p, *next; | |
1409 | ||
1410 | CLEAR_HARD_REG_BIT (hard_regs_in_table, regno); | |
1411 | ||
1412 | for (i = regno + 1; i < endregno; i++) | |
1413 | { | |
1414 | in_table |= TEST_HARD_REG_BIT (hard_regs_in_table, i); | |
1415 | CLEAR_HARD_REG_BIT (hard_regs_in_table, i); | |
1416 | delete_reg_equiv (i); | |
1417 | reg_tick[i]++; | |
1418 | } | |
1419 | ||
1420 | if (in_table) | |
1421 | for (hash = 0; hash < NBUCKETS; hash++) | |
1422 | for (p = table[hash]; p; p = next) | |
1423 | { | |
1424 | next = p->next_same_hash; | |
1425 | ||
1426 | if (GET_CODE (p->exp) != REG | |
1427 | || REGNO (p->exp) >= FIRST_PSEUDO_REGISTER) | |
1428 | continue; | |
1429 | ||
1430 | tregno = REGNO (p->exp); | |
1431 | tendregno | |
1432 | = tregno + HARD_REGNO_NREGS (tregno, GET_MODE (p->exp)); | |
1433 | if (tendregno > regno && tregno < endregno) | |
1434 | remove_from_table (p, hash); | |
1435 | } | |
1436 | } | |
1437 | ||
1438 | return; | |
1439 | } | |
1440 | ||
1441 | if (GET_CODE (x) == SUBREG) | |
1442 | { | |
1443 | if (GET_CODE (SUBREG_REG (x)) != REG) | |
1444 | abort (); | |
1445 | invalidate (SUBREG_REG (x)); | |
1446 | return; | |
1447 | } | |
1448 | ||
1449 | /* X is not a register; it must be a memory reference with | |
1450 | a nonvarying address. Remove all hash table elements | |
1451 | that refer to overlapping pieces of memory. */ | |
1452 | ||
1453 | if (GET_CODE (x) != MEM) | |
1454 | abort (); | |
1455 | base = XEXP (x, 0); | |
1456 | start = 0; | |
1457 | ||
1458 | /* Registers with nonvarying addresses usually have constant equivalents; | |
1459 | but the frame pointer register is also possible. */ | |
1460 | if (GET_CODE (base) == REG | |
1461 | && REGNO_QTY_VALID_P (REGNO (base)) | |
1462 | && qty_mode[reg_qty[REGNO (base)]] == GET_MODE (base) | |
1463 | && qty_const[reg_qty[REGNO (base)]] != 0) | |
1464 | base = qty_const[reg_qty[REGNO (base)]]; | |
1465 | else if (GET_CODE (base) == PLUS | |
1466 | && GET_CODE (XEXP (base, 1)) == CONST_INT | |
1467 | && GET_CODE (XEXP (base, 0)) == REG | |
1468 | && REGNO_QTY_VALID_P (REGNO (XEXP (base, 0))) | |
1469 | && (qty_mode[reg_qty[REGNO (XEXP (base, 0))]] | |
1470 | == GET_MODE (XEXP (base, 0))) | |
1471 | && qty_const[reg_qty[REGNO (XEXP (base, 0))]]) | |
1472 | { | |
1473 | start = INTVAL (XEXP (base, 1)); | |
1474 | base = qty_const[reg_qty[REGNO (XEXP (base, 0))]]; | |
1475 | } | |
1476 | ||
1477 | if (GET_CODE (base) == CONST) | |
1478 | base = XEXP (base, 0); | |
1479 | if (GET_CODE (base) == PLUS | |
1480 | && GET_CODE (XEXP (base, 1)) == CONST_INT) | |
1481 | { | |
1482 | start += INTVAL (XEXP (base, 1)); | |
1483 | base = XEXP (base, 0); | |
1484 | } | |
1485 | ||
1486 | end = start + GET_MODE_SIZE (GET_MODE (x)); | |
1487 | for (i = 0; i < NBUCKETS; i++) | |
1488 | { | |
1489 | register struct table_elt *next; | |
1490 | for (p = table[i]; p; p = next) | |
1491 | { | |
1492 | next = p->next_same_hash; | |
1493 | if (refers_to_mem_p (p->exp, base, start, end)) | |
1494 | remove_from_table (p, i); | |
1495 | } | |
1496 | } | |
1497 | } | |
1498 | ||
1499 | /* Remove all expressions that refer to register REGNO, | |
1500 | since they are already invalid, and we are about to | |
1501 | mark that register valid again and don't want the old | |
1502 | expressions to reappear as valid. */ | |
1503 | ||
1504 | static void | |
1505 | remove_invalid_refs (regno) | |
1506 | int regno; | |
1507 | { | |
1508 | register int i; | |
1509 | register struct table_elt *p, *next; | |
1510 | ||
1511 | for (i = 0; i < NBUCKETS; i++) | |
1512 | for (p = table[i]; p; p = next) | |
1513 | { | |
1514 | next = p->next_same_hash; | |
1515 | if (GET_CODE (p->exp) != REG | |
1516 | && refers_to_regno_p (regno, regno + 1, p->exp, 0)) | |
1517 | remove_from_table (p, i); | |
1518 | } | |
1519 | } | |
1520 | \f | |
1521 | /* Recompute the hash codes of any valid entries in the hash table that | |
1522 | reference X, if X is a register, or SUBREG_REG (X) if X is a SUBREG. | |
1523 | ||
1524 | This is called when we make a jump equivalence. */ | |
1525 | ||
1526 | static void | |
1527 | rehash_using_reg (x) | |
1528 | rtx x; | |
1529 | { | |
1530 | int i; | |
1531 | struct table_elt *p, *next; | |
1532 | int hash; | |
1533 | ||
1534 | if (GET_CODE (x) == SUBREG) | |
1535 | x = SUBREG_REG (x); | |
1536 | ||
1537 | /* If X is not a register or if the register is known not to be in any | |
1538 | valid entries in the table, we have no work to do. */ | |
1539 | ||
1540 | if (GET_CODE (x) != REG | |
1541 | || reg_in_table[REGNO (x)] < 0 | |
1542 | || reg_in_table[REGNO (x)] != reg_tick[REGNO (x)]) | |
1543 | return; | |
1544 | ||
1545 | /* Scan all hash chains looking for valid entries that mention X. | |
1546 | If we find one and it is in the wrong hash chain, move it. We can skip | |
1547 | objects that are registers, since they are handled specially. */ | |
1548 | ||
1549 | for (i = 0; i < NBUCKETS; i++) | |
1550 | for (p = table[i]; p; p = next) | |
1551 | { | |
1552 | next = p->next_same_hash; | |
1553 | if (GET_CODE (p->exp) != REG && reg_mentioned_p (x, p->exp) | |
538b78e7 | 1554 | && exp_equiv_p (p->exp, p->exp, 1, 0) |
7afe21cc RK |
1555 | && i != (hash = safe_hash (p->exp, p->mode) % NBUCKETS)) |
1556 | { | |
1557 | if (p->next_same_hash) | |
1558 | p->next_same_hash->prev_same_hash = p->prev_same_hash; | |
1559 | ||
1560 | if (p->prev_same_hash) | |
1561 | p->prev_same_hash->next_same_hash = p->next_same_hash; | |
1562 | else | |
1563 | table[i] = p->next_same_hash; | |
1564 | ||
1565 | p->next_same_hash = table[hash]; | |
1566 | p->prev_same_hash = 0; | |
1567 | if (table[hash]) | |
1568 | table[hash]->prev_same_hash = p; | |
1569 | table[hash] = p; | |
1570 | } | |
1571 | } | |
1572 | } | |
1573 | \f | |
1574 | /* Remove from the hash table all expressions that reference memory, | |
1575 | or some of them as specified by *WRITES. */ | |
1576 | ||
1577 | static void | |
1578 | invalidate_memory (writes) | |
1579 | struct write_data *writes; | |
1580 | { | |
1581 | register int i; | |
1582 | register struct table_elt *p, *next; | |
1583 | int all = writes->all; | |
1584 | int nonscalar = writes->nonscalar; | |
1585 | ||
1586 | for (i = 0; i < NBUCKETS; i++) | |
1587 | for (p = table[i]; p; p = next) | |
1588 | { | |
1589 | next = p->next_same_hash; | |
1590 | if (p->in_memory | |
1591 | && (all | |
1592 | || (nonscalar && p->in_struct) | |
1593 | || cse_rtx_addr_varies_p (p->exp))) | |
1594 | remove_from_table (p, i); | |
1595 | } | |
1596 | } | |
1597 | \f | |
1598 | /* Remove from the hash table any expression that is a call-clobbered | |
1599 | register. Also update their TICK values. */ | |
1600 | ||
1601 | static void | |
1602 | invalidate_for_call () | |
1603 | { | |
1604 | int regno, endregno; | |
1605 | int i; | |
1606 | int hash; | |
1607 | struct table_elt *p, *next; | |
1608 | int in_table = 0; | |
1609 | ||
1610 | /* Go through all the hard registers. For each that is clobbered in | |
1611 | a CALL_INSN, remove the register from quantity chains and update | |
1612 | reg_tick if defined. Also see if any of these registers is currently | |
1613 | in the table. */ | |
1614 | ||
1615 | for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) | |
1616 | if (TEST_HARD_REG_BIT (regs_invalidated_by_call, regno)) | |
1617 | { | |
1618 | delete_reg_equiv (regno); | |
1619 | if (reg_tick[regno] >= 0) | |
1620 | reg_tick[regno]++; | |
1621 | ||
1622 | in_table |= TEST_HARD_REG_BIT (hard_regs_in_table, regno); | |
1623 | } | |
1624 | ||
1625 | /* In the case where we have no call-clobbered hard registers in the | |
1626 | table, we are done. Otherwise, scan the table and remove any | |
1627 | entry that overlaps a call-clobbered register. */ | |
1628 | ||
1629 | if (in_table) | |
1630 | for (hash = 0; hash < NBUCKETS; hash++) | |
1631 | for (p = table[hash]; p; p = next) | |
1632 | { | |
1633 | next = p->next_same_hash; | |
1634 | ||
1635 | if (GET_CODE (p->exp) != REG | |
1636 | || REGNO (p->exp) >= FIRST_PSEUDO_REGISTER) | |
1637 | continue; | |
1638 | ||
1639 | regno = REGNO (p->exp); | |
1640 | endregno = regno + HARD_REGNO_NREGS (regno, GET_MODE (p->exp)); | |
1641 | ||
1642 | for (i = regno; i < endregno; i++) | |
1643 | if (TEST_HARD_REG_BIT (regs_invalidated_by_call, i)) | |
1644 | { | |
1645 | remove_from_table (p, hash); | |
1646 | break; | |
1647 | } | |
1648 | } | |
1649 | } | |
1650 | \f | |
1651 | /* Given an expression X of type CONST, | |
1652 | and ELT which is its table entry (or 0 if it | |
1653 | is not in the hash table), | |
1654 | return an alternate expression for X as a register plus integer. | |
1655 | If none can be found, return 0. */ | |
1656 | ||
1657 | static rtx | |
1658 | use_related_value (x, elt) | |
1659 | rtx x; | |
1660 | struct table_elt *elt; | |
1661 | { | |
1662 | register struct table_elt *relt = 0; | |
1663 | register struct table_elt *p, *q; | |
1664 | int offset; | |
1665 | ||
1666 | /* First, is there anything related known? | |
1667 | If we have a table element, we can tell from that. | |
1668 | Otherwise, must look it up. */ | |
1669 | ||
1670 | if (elt != 0 && elt->related_value != 0) | |
1671 | relt = elt; | |
1672 | else if (elt == 0 && GET_CODE (x) == CONST) | |
1673 | { | |
1674 | rtx subexp = get_related_value (x); | |
1675 | if (subexp != 0) | |
1676 | relt = lookup (subexp, | |
1677 | safe_hash (subexp, GET_MODE (subexp)) % NBUCKETS, | |
1678 | GET_MODE (subexp)); | |
1679 | } | |
1680 | ||
1681 | if (relt == 0) | |
1682 | return 0; | |
1683 | ||
1684 | /* Search all related table entries for one that has an | |
1685 | equivalent register. */ | |
1686 | ||
1687 | p = relt; | |
1688 | while (1) | |
1689 | { | |
1690 | /* This loop is strange in that it is executed in two different cases. | |
1691 | The first is when X is already in the table. Then it is searching | |
1692 | the RELATED_VALUE list of X's class (RELT). The second case is when | |
1693 | X is not in the table. Then RELT points to a class for the related | |
1694 | value. | |
1695 | ||
1696 | Ensure that, whatever case we are in, that we ignore classes that have | |
1697 | the same value as X. */ | |
1698 | ||
1699 | if (rtx_equal_p (x, p->exp)) | |
1700 | q = 0; | |
1701 | else | |
1702 | for (q = p->first_same_value; q; q = q->next_same_value) | |
1703 | if (GET_CODE (q->exp) == REG) | |
1704 | break; | |
1705 | ||
1706 | if (q) | |
1707 | break; | |
1708 | ||
1709 | p = p->related_value; | |
1710 | ||
1711 | /* We went all the way around, so there is nothing to be found. | |
1712 | Alternatively, perhaps RELT was in the table for some other reason | |
1713 | and it has no related values recorded. */ | |
1714 | if (p == relt || p == 0) | |
1715 | break; | |
1716 | } | |
1717 | ||
1718 | if (q == 0) | |
1719 | return 0; | |
1720 | ||
1721 | offset = (get_integer_term (x) - get_integer_term (p->exp)); | |
1722 | /* Note: OFFSET may be 0 if P->xexp and X are related by commutativity. */ | |
1723 | return plus_constant (q->exp, offset); | |
1724 | } | |
1725 | \f | |
1726 | /* Hash an rtx. We are careful to make sure the value is never negative. | |
1727 | Equivalent registers hash identically. | |
1728 | MODE is used in hashing for CONST_INTs only; | |
1729 | otherwise the mode of X is used. | |
1730 | ||
1731 | Store 1 in do_not_record if any subexpression is volatile. | |
1732 | ||
1733 | Store 1 in hash_arg_in_memory if X contains a MEM rtx | |
1734 | which does not have the RTX_UNCHANGING_P bit set. | |
1735 | In this case, also store 1 in hash_arg_in_struct | |
1736 | if there is a MEM rtx which has the MEM_IN_STRUCT_P bit set. | |
1737 | ||
1738 | Note that cse_insn knows that the hash code of a MEM expression | |
1739 | is just (int) MEM plus the hash code of the address. */ | |
1740 | ||
1741 | static int | |
1742 | canon_hash (x, mode) | |
1743 | rtx x; | |
1744 | enum machine_mode mode; | |
1745 | { | |
1746 | register int i, j; | |
1747 | register int hash = 0; | |
1748 | register enum rtx_code code; | |
1749 | register char *fmt; | |
1750 | ||
1751 | /* repeat is used to turn tail-recursion into iteration. */ | |
1752 | repeat: | |
1753 | if (x == 0) | |
1754 | return hash; | |
1755 | ||
1756 | code = GET_CODE (x); | |
1757 | switch (code) | |
1758 | { | |
1759 | case REG: | |
1760 | { | |
1761 | register int regno = REGNO (x); | |
1762 | ||
1763 | /* On some machines, we can't record any non-fixed hard register, | |
1764 | because extending its life will cause reload problems. We | |
1765 | consider ap, fp, and sp to be fixed for this purpose. | |
1766 | On all machines, we can't record any global registers. */ | |
1767 | ||
1768 | if (regno < FIRST_PSEUDO_REGISTER | |
1769 | && (global_regs[regno] | |
1770 | #ifdef SMALL_REGISTER_CLASSES | |
1771 | || (! fixed_regs[regno] | |
1772 | && regno != FRAME_POINTER_REGNUM | |
1773 | && regno != ARG_POINTER_REGNUM | |
1774 | && regno != STACK_POINTER_REGNUM) | |
1775 | #endif | |
1776 | )) | |
1777 | { | |
1778 | do_not_record = 1; | |
1779 | return 0; | |
1780 | } | |
1781 | return hash + ((int) REG << 7) + reg_qty[regno]; | |
1782 | } | |
1783 | ||
1784 | case CONST_INT: | |
1785 | hash += ((int) mode + ((int) CONST_INT << 7) | |
1786 | + INTVAL (x) + (INTVAL (x) >> HASHBITS)); | |
1787 | return ((1 << HASHBITS) - 1) & hash; | |
1788 | ||
1789 | case CONST_DOUBLE: | |
1790 | /* This is like the general case, except that it only counts | |
1791 | the integers representing the constant. */ | |
1792 | hash += (int) code + (int) GET_MODE (x); | |
1793 | { | |
1794 | int i; | |
1795 | for (i = 2; i < GET_RTX_LENGTH (CONST_DOUBLE); i++) | |
1796 | { | |
1797 | int tem = XINT (x, i); | |
1798 | hash += ((1 << HASHBITS) - 1) & (tem + (tem >> HASHBITS)); | |
1799 | } | |
1800 | } | |
1801 | return hash; | |
1802 | ||
1803 | /* Assume there is only one rtx object for any given label. */ | |
1804 | case LABEL_REF: | |
1805 | /* Use `and' to ensure a positive number. */ | |
1806 | return (hash + ((int) LABEL_REF << 7) | |
1807 | + ((int) XEXP (x, 0) & ((1 << HASHBITS) - 1))); | |
1808 | ||
1809 | case SYMBOL_REF: | |
1810 | return (hash + ((int) SYMBOL_REF << 7) | |
1811 | + ((int) XEXP (x, 0) & ((1 << HASHBITS) - 1))); | |
1812 | ||
1813 | case MEM: | |
1814 | if (MEM_VOLATILE_P (x)) | |
1815 | { | |
1816 | do_not_record = 1; | |
1817 | return 0; | |
1818 | } | |
1819 | if (! RTX_UNCHANGING_P (x)) | |
1820 | { | |
1821 | hash_arg_in_memory = 1; | |
1822 | if (MEM_IN_STRUCT_P (x)) hash_arg_in_struct = 1; | |
1823 | } | |
1824 | /* Now that we have already found this special case, | |
1825 | might as well speed it up as much as possible. */ | |
1826 | hash += (int) MEM; | |
1827 | x = XEXP (x, 0); | |
1828 | goto repeat; | |
1829 | ||
1830 | case PRE_DEC: | |
1831 | case PRE_INC: | |
1832 | case POST_DEC: | |
1833 | case POST_INC: | |
1834 | case PC: | |
1835 | case CC0: | |
1836 | case CALL: | |
1837 | case UNSPEC_VOLATILE: | |
1838 | do_not_record = 1; | |
1839 | return 0; | |
1840 | ||
1841 | case ASM_OPERANDS: | |
1842 | if (MEM_VOLATILE_P (x)) | |
1843 | { | |
1844 | do_not_record = 1; | |
1845 | return 0; | |
1846 | } | |
1847 | } | |
1848 | ||
1849 | i = GET_RTX_LENGTH (code) - 1; | |
1850 | hash += (int) code + (int) GET_MODE (x); | |
1851 | fmt = GET_RTX_FORMAT (code); | |
1852 | for (; i >= 0; i--) | |
1853 | { | |
1854 | if (fmt[i] == 'e') | |
1855 | { | |
1856 | rtx tem = XEXP (x, i); | |
1857 | rtx tem1; | |
1858 | ||
1859 | /* If the operand is a REG that is equivalent to a constant, hash | |
1860 | as if we were hashing the constant, since we will be comparing | |
1861 | that way. */ | |
1862 | if (tem != 0 && GET_CODE (tem) == REG | |
1863 | && REGNO_QTY_VALID_P (REGNO (tem)) | |
1864 | && qty_mode[reg_qty[REGNO (tem)]] == GET_MODE (tem) | |
1865 | && (tem1 = qty_const[reg_qty[REGNO (tem)]]) != 0 | |
1866 | && CONSTANT_P (tem1)) | |
1867 | tem = tem1; | |
1868 | ||
1869 | /* If we are about to do the last recursive call | |
1870 | needed at this level, change it into iteration. | |
1871 | This function is called enough to be worth it. */ | |
1872 | if (i == 0) | |
1873 | { | |
1874 | x = tem; | |
1875 | goto repeat; | |
1876 | } | |
1877 | hash += canon_hash (tem, 0); | |
1878 | } | |
1879 | else if (fmt[i] == 'E') | |
1880 | for (j = 0; j < XVECLEN (x, i); j++) | |
1881 | hash += canon_hash (XVECEXP (x, i, j), 0); | |
1882 | else if (fmt[i] == 's') | |
1883 | { | |
1884 | register char *p = XSTR (x, i); | |
1885 | if (p) | |
1886 | while (*p) | |
1887 | { | |
1888 | register int tem = *p++; | |
1889 | hash += ((1 << HASHBITS) - 1) & (tem + (tem >> HASHBITS)); | |
1890 | } | |
1891 | } | |
1892 | else if (fmt[i] == 'i') | |
1893 | { | |
1894 | register int tem = XINT (x, i); | |
1895 | hash += ((1 << HASHBITS) - 1) & (tem + (tem >> HASHBITS)); | |
1896 | } | |
1897 | else | |
1898 | abort (); | |
1899 | } | |
1900 | return hash; | |
1901 | } | |
1902 | ||
1903 | /* Like canon_hash but with no side effects. */ | |
1904 | ||
1905 | static int | |
1906 | safe_hash (x, mode) | |
1907 | rtx x; | |
1908 | enum machine_mode mode; | |
1909 | { | |
1910 | int save_do_not_record = do_not_record; | |
1911 | int save_hash_arg_in_memory = hash_arg_in_memory; | |
1912 | int save_hash_arg_in_struct = hash_arg_in_struct; | |
1913 | int hash = canon_hash (x, mode); | |
1914 | hash_arg_in_memory = save_hash_arg_in_memory; | |
1915 | hash_arg_in_struct = save_hash_arg_in_struct; | |
1916 | do_not_record = save_do_not_record; | |
1917 | return hash; | |
1918 | } | |
1919 | \f | |
1920 | /* Return 1 iff X and Y would canonicalize into the same thing, | |
1921 | without actually constructing the canonicalization of either one. | |
1922 | If VALIDATE is nonzero, | |
1923 | we assume X is an expression being processed from the rtl | |
1924 | and Y was found in the hash table. We check register refs | |
1925 | in Y for being marked as valid. | |
1926 | ||
1927 | If EQUAL_VALUES is nonzero, we allow a register to match a constant value | |
1928 | that is known to be in the register. Ordinarily, we don't allow them | |
1929 | to match, because letting them match would cause unpredictable results | |
1930 | in all the places that search a hash table chain for an equivalent | |
1931 | for a given value. A possible equivalent that has different structure | |
1932 | has its hash code computed from different data. Whether the hash code | |
1933 | is the same as that of the the given value is pure luck. */ | |
1934 | ||
1935 | static int | |
1936 | exp_equiv_p (x, y, validate, equal_values) | |
1937 | rtx x, y; | |
1938 | int validate; | |
1939 | int equal_values; | |
1940 | { | |
1941 | register int i; | |
1942 | register enum rtx_code code; | |
1943 | register char *fmt; | |
1944 | ||
1945 | /* Note: it is incorrect to assume an expression is equivalent to itself | |
1946 | if VALIDATE is nonzero. */ | |
1947 | if (x == y && !validate) | |
1948 | return 1; | |
1949 | if (x == 0 || y == 0) | |
1950 | return x == y; | |
1951 | ||
1952 | code = GET_CODE (x); | |
1953 | if (code != GET_CODE (y)) | |
1954 | { | |
1955 | if (!equal_values) | |
1956 | return 0; | |
1957 | ||
1958 | /* If X is a constant and Y is a register or vice versa, they may be | |
1959 | equivalent. We only have to validate if Y is a register. */ | |
1960 | if (CONSTANT_P (x) && GET_CODE (y) == REG | |
1961 | && REGNO_QTY_VALID_P (REGNO (y)) | |
1962 | && GET_MODE (y) == qty_mode[reg_qty[REGNO (y)]] | |
1963 | && rtx_equal_p (x, qty_const[reg_qty[REGNO (y)]]) | |
1964 | && (! validate || reg_in_table[REGNO (y)] == reg_tick[REGNO (y)])) | |
1965 | return 1; | |
1966 | ||
1967 | if (CONSTANT_P (y) && code == REG | |
1968 | && REGNO_QTY_VALID_P (REGNO (x)) | |
1969 | && GET_MODE (x) == qty_mode[reg_qty[REGNO (x)]] | |
1970 | && rtx_equal_p (y, qty_const[reg_qty[REGNO (x)]])) | |
1971 | return 1; | |
1972 | ||
1973 | return 0; | |
1974 | } | |
1975 | ||
1976 | /* (MULT:SI x y) and (MULT:HI x y) are NOT equivalent. */ | |
1977 | if (GET_MODE (x) != GET_MODE (y)) | |
1978 | return 0; | |
1979 | ||
1980 | switch (code) | |
1981 | { | |
1982 | case PC: | |
1983 | case CC0: | |
1984 | return x == y; | |
1985 | ||
1986 | case CONST_INT: | |
1987 | return XINT (x, 0) == XINT (y, 0); | |
1988 | ||
1989 | case LABEL_REF: | |
1990 | case SYMBOL_REF: | |
1991 | return XEXP (x, 0) == XEXP (y, 0); | |
1992 | ||
1993 | case REG: | |
1994 | { | |
1995 | int regno = REGNO (y); | |
1996 | int endregno | |
1997 | = regno + (regno >= FIRST_PSEUDO_REGISTER ? 1 | |
1998 | : HARD_REGNO_NREGS (regno, GET_MODE (y))); | |
1999 | int i; | |
2000 | ||
2001 | /* If the quantities are not the same, the expressions are not | |
2002 | equivalent. If there are and we are not to validate, they | |
2003 | are equivalent. Otherwise, ensure all regs are up-to-date. */ | |
2004 | ||
2005 | if (reg_qty[REGNO (x)] != reg_qty[regno]) | |
2006 | return 0; | |
2007 | ||
2008 | if (! validate) | |
2009 | return 1; | |
2010 | ||
2011 | for (i = regno; i < endregno; i++) | |
2012 | if (reg_in_table[i] != reg_tick[i]) | |
2013 | return 0; | |
2014 | ||
2015 | return 1; | |
2016 | } | |
2017 | ||
2018 | /* For commutative operations, check both orders. */ | |
2019 | case PLUS: | |
2020 | case MULT: | |
2021 | case AND: | |
2022 | case IOR: | |
2023 | case XOR: | |
2024 | case NE: | |
2025 | case EQ: | |
2026 | return ((exp_equiv_p (XEXP (x, 0), XEXP (y, 0), validate, equal_values) | |
2027 | && exp_equiv_p (XEXP (x, 1), XEXP (y, 1), | |
2028 | validate, equal_values)) | |
2029 | || (exp_equiv_p (XEXP (x, 0), XEXP (y, 1), | |
2030 | validate, equal_values) | |
2031 | && exp_equiv_p (XEXP (x, 1), XEXP (y, 0), | |
2032 | validate, equal_values))); | |
2033 | } | |
2034 | ||
2035 | /* Compare the elements. If any pair of corresponding elements | |
2036 | fail to match, return 0 for the whole things. */ | |
2037 | ||
2038 | fmt = GET_RTX_FORMAT (code); | |
2039 | for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) | |
2040 | { | |
2041 | if (fmt[i] == 'e') | |
2042 | { | |
2043 | if (! exp_equiv_p (XEXP (x, i), XEXP (y, i), validate, equal_values)) | |
2044 | return 0; | |
2045 | } | |
2046 | else if (fmt[i] == 'E') | |
2047 | { | |
2048 | int j; | |
2049 | if (XVECLEN (x, i) != XVECLEN (y, i)) | |
2050 | return 0; | |
2051 | for (j = 0; j < XVECLEN (x, i); j++) | |
2052 | if (! exp_equiv_p (XVECEXP (x, i, j), XVECEXP (y, i, j), | |
2053 | validate, equal_values)) | |
2054 | return 0; | |
2055 | } | |
2056 | else if (fmt[i] == 's') | |
2057 | { | |
2058 | if (strcmp (XSTR (x, i), XSTR (y, i))) | |
2059 | return 0; | |
2060 | } | |
2061 | else if (fmt[i] == 'i') | |
2062 | { | |
2063 | if (XINT (x, i) != XINT (y, i)) | |
2064 | return 0; | |
2065 | } | |
2066 | else if (fmt[i] != '0') | |
2067 | abort (); | |
2068 | } | |
2069 | return 1; | |
2070 | } | |
2071 | \f | |
2072 | /* Return 1 iff any subexpression of X matches Y. | |
2073 | Here we do not require that X or Y be valid (for registers referred to) | |
2074 | for being in the hash table. */ | |
2075 | ||
2076 | int | |
2077 | refers_to_p (x, y) | |
2078 | rtx x, y; | |
2079 | { | |
2080 | register int i; | |
2081 | register enum rtx_code code; | |
2082 | register char *fmt; | |
2083 | ||
2084 | repeat: | |
2085 | if (x == y) | |
2086 | return 1; | |
2087 | if (x == 0 || y == 0) | |
2088 | return 0; | |
2089 | ||
2090 | code = GET_CODE (x); | |
2091 | /* If X as a whole has the same code as Y, they may match. | |
2092 | If so, return 1. */ | |
2093 | if (code == GET_CODE (y)) | |
2094 | { | |
2095 | if (exp_equiv_p (x, y, 0, 1)) | |
2096 | return 1; | |
2097 | } | |
2098 | ||
2099 | /* X does not match, so try its subexpressions. */ | |
2100 | ||
2101 | fmt = GET_RTX_FORMAT (code); | |
2102 | for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) | |
2103 | if (fmt[i] == 'e') | |
2104 | { | |
2105 | if (i == 0) | |
2106 | { | |
2107 | x = XEXP (x, 0); | |
2108 | goto repeat; | |
2109 | } | |
2110 | else | |
2111 | if (refers_to_p (XEXP (x, i), y)) | |
2112 | return 1; | |
2113 | } | |
2114 | else if (fmt[i] == 'E') | |
2115 | { | |
2116 | int j; | |
2117 | for (j = 0; j < XVECLEN (x, i); j++) | |
2118 | if (refers_to_p (XVECEXP (x, i, j), y)) | |
2119 | return 1; | |
2120 | } | |
2121 | ||
2122 | return 0; | |
2123 | } | |
2124 | \f | |
2125 | /* Return 1 iff any subexpression of X refers to memory | |
2126 | at an address of BASE plus some offset | |
2127 | such that any of the bytes' offsets fall between START (inclusive) | |
2128 | and END (exclusive). | |
2129 | ||
2130 | The value is undefined if X is a varying address. | |
2131 | This function is not used in such cases. | |
2132 | ||
2133 | When used in the cse pass, `qty_const' is nonzero, and it is used | |
2134 | to treat an address that is a register with a known constant value | |
2135 | as if it were that constant value. | |
2136 | In the loop pass, `qty_const' is zero, so this is not done. */ | |
2137 | ||
2138 | int | |
2139 | refers_to_mem_p (x, base, start, end) | |
2140 | rtx x, base; | |
2141 | int start, end; | |
2142 | { | |
2143 | register int i; | |
2144 | register enum rtx_code code; | |
2145 | register char *fmt; | |
2146 | ||
2147 | if (GET_CODE (base) == CONST_INT) | |
2148 | { | |
2149 | start += INTVAL (base); | |
2150 | end += INTVAL (base); | |
2151 | base = const0_rtx; | |
2152 | } | |
2153 | ||
2154 | repeat: | |
2155 | if (x == 0) | |
2156 | return 0; | |
2157 | ||
2158 | code = GET_CODE (x); | |
2159 | if (code == MEM) | |
2160 | { | |
2161 | register rtx addr = XEXP (x, 0); /* Get the address. */ | |
2162 | int myend; | |
2163 | ||
2164 | i = 0; | |
2165 | if (GET_CODE (addr) == REG | |
2166 | /* qty_const is 0 when outside the cse pass; | |
2167 | at such times, this info is not available. */ | |
2168 | && qty_const != 0 | |
2169 | && REGNO_QTY_VALID_P (REGNO (addr)) | |
2170 | && GET_MODE (addr) == qty_mode[reg_qty[REGNO (addr)]] | |
2171 | && qty_const[reg_qty[REGNO (addr)]] != 0) | |
2172 | addr = qty_const[reg_qty[REGNO (addr)]]; | |
2173 | else if (GET_CODE (addr) == PLUS | |
2174 | && GET_CODE (XEXP (addr, 1)) == CONST_INT | |
2175 | && GET_CODE (XEXP (addr, 0)) == REG | |
2176 | && qty_const != 0 | |
2177 | && REGNO_QTY_VALID_P (REGNO (XEXP (addr, 0))) | |
2178 | && (GET_MODE (XEXP (addr, 0)) | |
2179 | == qty_mode[reg_qty[REGNO (XEXP (addr, 0))]]) | |
2180 | && qty_const[reg_qty[REGNO (XEXP (addr, 0))]]) | |
2181 | { | |
2182 | i = INTVAL (XEXP (addr, 1)); | |
2183 | addr = qty_const[reg_qty[REGNO (XEXP (addr, 0))]]; | |
2184 | } | |
2185 | ||
2186 | check_addr: | |
2187 | if (GET_CODE (addr) == CONST) | |
2188 | addr = XEXP (addr, 0); | |
2189 | ||
2190 | /* If ADDR is BASE, or BASE plus an integer, put | |
2191 | the integer in I. */ | |
2192 | if (GET_CODE (addr) == PLUS | |
2193 | && XEXP (addr, 0) == base | |
2194 | && GET_CODE (XEXP (addr, 1)) == CONST_INT) | |
2195 | i += INTVAL (XEXP (addr, 1)); | |
2196 | else if (GET_CODE (addr) == LO_SUM) | |
2197 | { | |
2198 | if (GET_CODE (base) != LO_SUM) | |
2199 | return 1; | |
2200 | /* The REG component of the LO_SUM is known by the | |
2201 | const value in the XEXP part. */ | |
2202 | addr = XEXP (addr, 1); | |
2203 | base = XEXP (base, 1); | |
2204 | i = 0; | |
2205 | if (GET_CODE (base) == CONST) | |
2206 | base = XEXP (base, 0); | |
2207 | if (GET_CODE (base) == PLUS | |
2208 | && GET_CODE (XEXP (base, 1)) == CONST_INT) | |
2209 | { | |
2210 | int tem = INTVAL (XEXP (base, 1)); | |
2211 | start += tem; | |
2212 | end += tem; | |
2213 | base = XEXP (base, 0); | |
2214 | } | |
2215 | goto check_addr; | |
2216 | } | |
2217 | else if (GET_CODE (base) == LO_SUM) | |
2218 | { | |
2219 | base = XEXP (base, 1); | |
2220 | if (GET_CODE (base) == CONST) | |
2221 | base = XEXP (base, 0); | |
2222 | if (GET_CODE (base) == PLUS | |
2223 | && GET_CODE (XEXP (base, 1)) == CONST_INT) | |
2224 | { | |
2225 | int tem = INTVAL (XEXP (base, 1)); | |
2226 | start += tem; | |
2227 | end += tem; | |
2228 | base = XEXP (base, 0); | |
2229 | } | |
2230 | goto check_addr; | |
2231 | } | |
2232 | else if (GET_CODE (addr) == CONST_INT && base == const0_rtx) | |
2233 | i = INTVAL (addr); | |
2234 | else if (addr != base) | |
2235 | return 0; | |
2236 | ||
2237 | myend = i + GET_MODE_SIZE (GET_MODE (x)); | |
2238 | return myend > start && i < end; | |
2239 | } | |
2240 | ||
2241 | /* X does not match, so try its subexpressions. */ | |
2242 | ||
2243 | fmt = GET_RTX_FORMAT (code); | |
2244 | for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) | |
2245 | if (fmt[i] == 'e') | |
2246 | { | |
2247 | if (i == 0) | |
2248 | { | |
2249 | x = XEXP (x, 0); | |
2250 | goto repeat; | |
2251 | } | |
2252 | else | |
2253 | if (refers_to_mem_p (XEXP (x, i), base, start, end)) | |
2254 | return 1; | |
2255 | } | |
2256 | else if (fmt[i] == 'E') | |
2257 | { | |
2258 | int j; | |
2259 | for (j = 0; j < XVECLEN (x, i); j++) | |
2260 | if (refers_to_mem_p (XVECEXP (x, i, j), base, start, end)) | |
2261 | return 1; | |
2262 | } | |
2263 | ||
2264 | return 0; | |
2265 | } | |
2266 | ||
2267 | /* Nonzero if X refers to memory at a varying address; | |
2268 | except that a register which has at the moment a known constant value | |
2269 | isn't considered variable. */ | |
2270 | ||
2271 | static int | |
2272 | cse_rtx_addr_varies_p (x) | |
2273 | rtx x; | |
2274 | { | |
2275 | /* We need not check for X and the equivalence class being of the same | |
2276 | mode because if X is equivalent to a constant in some mode, it | |
2277 | doesn't vary in any mode. */ | |
2278 | ||
2279 | if (GET_CODE (x) == MEM | |
2280 | && GET_CODE (XEXP (x, 0)) == REG | |
2281 | && REGNO_QTY_VALID_P (REGNO (XEXP (x, 0))) | |
2282 | && GET_MODE (XEXP (x, 0)) == qty_mode[reg_qty[REGNO (XEXP (x, 0))]] | |
2283 | && qty_const[reg_qty[REGNO (XEXP (x, 0))]] != 0) | |
2284 | return 0; | |
2285 | ||
2286 | if (GET_CODE (x) == MEM | |
2287 | && GET_CODE (XEXP (x, 0)) == PLUS | |
2288 | && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT | |
2289 | && GET_CODE (XEXP (XEXP (x, 0), 0)) == REG | |
2290 | && REGNO_QTY_VALID_P (REGNO (XEXP (XEXP (x, 0), 0))) | |
2291 | && (GET_MODE (XEXP (XEXP (x, 0), 0)) | |
2292 | == qty_mode[reg_qty[REGNO (XEXP (XEXP (x, 0), 0))]]) | |
2293 | && qty_const[reg_qty[REGNO (XEXP (XEXP (x, 0), 0))]]) | |
2294 | return 0; | |
2295 | ||
2296 | return rtx_addr_varies_p (x); | |
2297 | } | |
2298 | \f | |
2299 | /* Canonicalize an expression: | |
2300 | replace each register reference inside it | |
2301 | with the "oldest" equivalent register. | |
2302 | ||
2303 | If INSN is non-zero and we are replacing a pseudo with a hard register | |
2304 | or vice versa, verify that INSN remains valid after we make our | |
2305 | substitution. */ | |
2306 | ||
2307 | static rtx | |
2308 | canon_reg (x, insn) | |
2309 | rtx x; | |
2310 | rtx insn; | |
2311 | { | |
2312 | register int i; | |
2313 | register enum rtx_code code; | |
2314 | register char *fmt; | |
2315 | ||
2316 | if (x == 0) | |
2317 | return x; | |
2318 | ||
2319 | code = GET_CODE (x); | |
2320 | switch (code) | |
2321 | { | |
2322 | case PC: | |
2323 | case CC0: | |
2324 | case CONST: | |
2325 | case CONST_INT: | |
2326 | case CONST_DOUBLE: | |
2327 | case SYMBOL_REF: | |
2328 | case LABEL_REF: | |
2329 | case ADDR_VEC: | |
2330 | case ADDR_DIFF_VEC: | |
2331 | return x; | |
2332 | ||
2333 | case REG: | |
2334 | { | |
2335 | register int first; | |
2336 | ||
2337 | /* Never replace a hard reg, because hard regs can appear | |
2338 | in more than one machine mode, and we must preserve the mode | |
2339 | of each occurrence. Also, some hard regs appear in | |
2340 | MEMs that are shared and mustn't be altered. Don't try to | |
2341 | replace any reg that maps to a reg of class NO_REGS. */ | |
2342 | if (REGNO (x) < FIRST_PSEUDO_REGISTER | |
2343 | || ! REGNO_QTY_VALID_P (REGNO (x))) | |
2344 | return x; | |
2345 | ||
2346 | first = qty_first_reg[reg_qty[REGNO (x)]]; | |
2347 | return (first >= FIRST_PSEUDO_REGISTER ? regno_reg_rtx[first] | |
2348 | : REGNO_REG_CLASS (first) == NO_REGS ? x | |
2349 | : gen_rtx (REG, qty_mode[reg_qty[REGNO (x)]], first)); | |
2350 | } | |
2351 | } | |
2352 | ||
2353 | fmt = GET_RTX_FORMAT (code); | |
2354 | for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) | |
2355 | { | |
2356 | register int j; | |
2357 | ||
2358 | if (fmt[i] == 'e') | |
2359 | { | |
2360 | rtx new = canon_reg (XEXP (x, i), insn); | |
2361 | ||
2362 | /* If replacing pseudo with hard reg or vice versa, ensure the | |
2363 | insn remains valid. */ | |
2364 | if (new && GET_CODE (new) == REG && GET_CODE (XEXP (x, i)) == REG | |
2365 | && ((REGNO (new) < FIRST_PSEUDO_REGISTER) | |
2366 | != (REGNO (XEXP (x, i)) < FIRST_PSEUDO_REGISTER))) | |
2367 | validate_change (insn, &XEXP (x, i), new, 0); | |
2368 | else | |
2369 | XEXP (x, i) = new; | |
2370 | } | |
2371 | else if (fmt[i] == 'E') | |
2372 | for (j = 0; j < XVECLEN (x, i); j++) | |
2373 | XVECEXP (x, i, j) = canon_reg (XVECEXP (x, i, j), insn); | |
2374 | } | |
2375 | ||
2376 | return x; | |
2377 | } | |
2378 | \f | |
2379 | /* LOC is a location with INSN that is an operand address (the contents of | |
2380 | a MEM). Find the best equivalent address to use that is valid for this | |
2381 | insn. | |
2382 | ||
2383 | On most CISC machines, complicated address modes are costly, and rtx_cost | |
2384 | is a good approximation for that cost. However, most RISC machines have | |
2385 | only a few (usually only one) memory reference formats. If an address is | |
2386 | valid at all, it is often just as cheap as any other address. Hence, for | |
2387 | RISC machines, we use the configuration macro `ADDRESS_COST' to compare the | |
2388 | costs of various addresses. For two addresses of equal cost, choose the one | |
2389 | with the highest `rtx_cost' value as that has the potential of eliminating | |
2390 | the most insns. For equal costs, we choose the first in the equivalence | |
2391 | class. Note that we ignore the fact that pseudo registers are cheaper | |
2392 | than hard registers here because we would also prefer the pseudo registers. | |
2393 | */ | |
2394 | ||
2395 | void | |
2396 | find_best_addr (insn, loc) | |
2397 | rtx insn; | |
2398 | rtx *loc; | |
2399 | { | |
2400 | struct table_elt *elt, *p; | |
2401 | rtx addr = *loc; | |
2402 | int our_cost; | |
2403 | int found_better = 1; | |
2404 | int save_do_not_record = do_not_record; | |
2405 | int save_hash_arg_in_memory = hash_arg_in_memory; | |
2406 | int save_hash_arg_in_struct = hash_arg_in_struct; | |
2407 | int hash_code; | |
2408 | int addr_volatile; | |
2409 | int regno; | |
2410 | ||
2411 | /* Do not try to replace constant addresses or addresses of local and | |
2412 | argument slots. These MEM expressions are made only once and inserted | |
2413 | in many instructions, as well as being used to control symbol table | |
2414 | output. It is not safe to clobber them. | |
2415 | ||
2416 | There are some uncommon cases where the address is already in a register | |
2417 | for some reason, but we cannot take advantage of that because we have | |
2418 | no easy way to unshare the MEM. In addition, looking up all stack | |
2419 | addresses is costly. */ | |
2420 | if ((GET_CODE (addr) == PLUS | |
2421 | && GET_CODE (XEXP (addr, 0)) == REG | |
2422 | && GET_CODE (XEXP (addr, 1)) == CONST_INT | |
2423 | && (regno = REGNO (XEXP (addr, 0)), | |
2424 | regno == FRAME_POINTER_REGNUM || regno == ARG_POINTER_REGNUM)) | |
2425 | || (GET_CODE (addr) == REG | |
2426 | && (regno = REGNO (addr), | |
2427 | regno == FRAME_POINTER_REGNUM || regno == ARG_POINTER_REGNUM)) | |
2428 | || CONSTANT_ADDRESS_P (addr)) | |
2429 | return; | |
2430 | ||
2431 | /* If this address is not simply a register, try to fold it. This will | |
2432 | sometimes simplify the expression. Many simplifications | |
2433 | will not be valid, but some, usually applying the associative rule, will | |
2434 | be valid and produce better code. */ | |
2435 | if (GET_CODE (addr) != REG | |
2436 | && validate_change (insn, loc, fold_rtx (addr, insn), 0)) | |
2437 | addr = *loc; | |
2438 | ||
2439 | /* If this address is not in the hash table, we can't do any better. | |
2440 | Also, ignore if volatile. */ | |
2441 | do_not_record = 0; | |
2442 | hash_code = HASH (addr, Pmode); | |
2443 | addr_volatile = do_not_record; | |
2444 | do_not_record = save_do_not_record; | |
2445 | hash_arg_in_memory = save_hash_arg_in_memory; | |
2446 | hash_arg_in_struct = save_hash_arg_in_struct; | |
2447 | ||
2448 | if (addr_volatile) | |
2449 | return; | |
2450 | ||
2451 | elt = lookup (addr, hash_code, Pmode); | |
2452 | ||
2453 | if (elt == 0) | |
2454 | return; | |
2455 | ||
2456 | #ifndef ADDRESS_COST | |
2457 | our_cost = elt->cost; | |
2458 | ||
2459 | /* Find the lowest cost below ours that works. */ | |
2460 | for (elt = elt->first_same_value; elt; elt = elt->next_same_value) | |
2461 | if (elt->cost < our_cost | |
2462 | && (GET_CODE (elt->exp) == REG || exp_equiv_p (elt->exp, elt->exp, 1, 0)) | |
2463 | && validate_change (insn, loc, canon_reg (copy_rtx (elt->exp), 0), 0)) | |
2464 | return; | |
2465 | ||
2466 | #else | |
2467 | ||
2468 | /* We need to find the best (under the criteria documented above) entry in | |
2469 | the class that is valid. We use the `flag' field to indicate choices | |
2470 | that were invalid and iterate until we can't find a better one that | |
2471 | hasn't already been tried. */ | |
2472 | ||
2473 | for (p = elt->first_same_value; p; p = p->next_same_value) | |
2474 | p->flag = 0; | |
2475 | ||
2476 | while (found_better) | |
2477 | { | |
2478 | int best_addr_cost = ADDRESS_COST (*loc); | |
2479 | int best_rtx_cost = (elt->cost + 1) >> 1; | |
2480 | struct table_elt *best_elt = elt; | |
2481 | ||
2482 | found_better = 0; | |
2483 | for (p = elt->first_same_value; p; p = p->next_same_value) | |
2484 | if (! p->flag | |
2485 | && (GET_CODE (p->exp) == REG || exp_equiv_p (p->exp, p->exp, 1, 0)) | |
2486 | && (ADDRESS_COST (p->exp) < best_addr_cost | |
2487 | || (ADDRESS_COST (p->exp) == best_addr_cost | |
2488 | && (p->cost + 1) >> 1 > best_rtx_cost))) | |
2489 | { | |
2490 | found_better = 1; | |
2491 | best_addr_cost = ADDRESS_COST (p->exp); | |
2492 | best_rtx_cost = (p->cost + 1) >> 1; | |
2493 | best_elt = p; | |
2494 | } | |
2495 | ||
2496 | if (found_better) | |
2497 | { | |
2498 | if (validate_change (insn, loc, | |
2499 | canon_reg (copy_rtx (best_elt->exp), 0), 0)) | |
2500 | return; | |
2501 | else | |
2502 | best_elt->flag = 1; | |
2503 | } | |
2504 | } | |
2505 | #endif | |
2506 | } | |
2507 | \f | |
2508 | /* Given an operation (CODE, *PARG1, *PARG2), where code is a comparison | |
2509 | operation (EQ, NE, GT, etc.), follow it back through the hash table and | |
2510 | what values are being compared. | |
2511 | ||
2512 | *PARG1 and *PARG2 are updated to contain the rtx representing the values | |
2513 | actually being compared. For example, if *PARG1 was (cc0) and *PARG2 | |
2514 | was (const_int 0), *PARG1 and *PARG2 will be set to the objects that were | |
2515 | compared to produce cc0. | |
2516 | ||
2517 | The return value is the comparison operator and is either the code of | |
2518 | A or the code corresponding to the inverse of the comparison. */ | |
2519 | ||
2520 | static enum rtx_code | |
2521 | find_comparison_args (code, parg1, parg2) | |
2522 | enum rtx_code code; | |
2523 | rtx *parg1, *parg2; | |
2524 | { | |
2525 | rtx arg1, arg2; | |
2526 | ||
2527 | arg1 = *parg1, arg2 = *parg2; | |
2528 | ||
2529 | /* If ARG2 is const0_rtx, see what ARG1 is equivalent to. */ | |
2530 | ||
2531 | while (arg2 == const0_rtx) | |
2532 | { | |
2533 | /* Set non-zero when we find something of interest. */ | |
2534 | rtx x = 0; | |
2535 | int reverse_code = 0; | |
2536 | struct table_elt *p = 0; | |
2537 | ||
2538 | /* If arg1 is a COMPARE, extract the comparison arguments from it. | |
2539 | On machines with CC0, this is the only case that can occur, since | |
2540 | fold_rtx will return the COMPARE or item being compared with zero | |
2541 | when given CC0. */ | |
2542 | ||
2543 | if (GET_CODE (arg1) == COMPARE && arg2 == const0_rtx) | |
2544 | x = arg1; | |
2545 | ||
2546 | /* If ARG1 is a comparison operator and CODE is testing for | |
2547 | STORE_FLAG_VALUE, get the inner arguments. */ | |
2548 | ||
2549 | else if (GET_RTX_CLASS (GET_CODE (arg1)) == '<') | |
2550 | { | |
2551 | if (code == NE || (code == LT && STORE_FLAG_VALUE == -1)) | |
2552 | x = arg1; | |
2553 | else if (code == EQ || (code == GE && STORE_FLAG_VALUE == -1)) | |
2554 | x = arg1, reverse_code = 1; | |
2555 | } | |
2556 | ||
2557 | /* ??? We could also check for | |
2558 | ||
2559 | (ne (and (eq (...) (const_int 1))) (const_int 0)) | |
2560 | ||
2561 | and related forms, but let's wait until we see them occurring. */ | |
2562 | ||
2563 | if (x == 0) | |
2564 | /* Look up ARG1 in the hash table and see if it has an equivalence | |
2565 | that lets us see what is being compared. */ | |
2566 | p = lookup (arg1, safe_hash (arg1, GET_MODE (arg1)) % NBUCKETS, | |
2567 | GET_MODE (arg1)); | |
2568 | if (p) p = p->first_same_value; | |
2569 | ||
2570 | for (; p; p = p->next_same_value) | |
2571 | { | |
2572 | enum machine_mode inner_mode = GET_MODE (p->exp); | |
2573 | ||
2574 | /* If the entry isn't valid, skip it. */ | |
2575 | if (! exp_equiv_p (p->exp, p->exp, 1, 0)) | |
2576 | continue; | |
2577 | ||
2578 | if (GET_CODE (p->exp) == COMPARE | |
2579 | /* Another possibility is that this machine has a compare insn | |
2580 | that includes the comparison code. In that case, ARG1 would | |
2581 | be equivalent to a comparison operation that would set ARG1 to | |
2582 | either STORE_FLAG_VALUE or zero. If this is an NE operation, | |
2583 | ORIG_CODE is the actual comparison being done; if it is an EQ, | |
2584 | we must reverse ORIG_CODE. On machine with a negative value | |
2585 | for STORE_FLAG_VALUE, also look at LT and GE operations. */ | |
2586 | || ((code == NE | |
2587 | || (code == LT | |
2588 | && inner_mode != VOIDmode | |
2589 | && GET_MODE_BITSIZE (inner_mode) <= HOST_BITS_PER_INT | |
2590 | && (STORE_FLAG_VALUE | |
2591 | & (1 << (GET_MODE_BITSIZE (inner_mode) - 1))))) | |
2592 | && GET_RTX_CLASS (GET_CODE (p->exp)) == '<')) | |
2593 | { | |
2594 | x = p->exp; | |
2595 | break; | |
2596 | } | |
2597 | else if ((code == EQ | |
2598 | || (code == GE | |
2599 | && inner_mode != VOIDmode | |
2600 | && GET_MODE_BITSIZE (inner_mode) <= HOST_BITS_PER_INT | |
2601 | && (STORE_FLAG_VALUE | |
2602 | & (1 << (GET_MODE_BITSIZE (inner_mode) - 1))))) | |
2603 | && GET_RTX_CLASS (GET_CODE (p->exp)) == '<') | |
2604 | { | |
2605 | reverse_code = 1; | |
2606 | x = p->exp; | |
2607 | break; | |
2608 | } | |
2609 | ||
2610 | /* If this is fp + constant, the equivalent is a better operand since | |
2611 | it may let us predict the value of the comparison. */ | |
2612 | else if (NONZERO_BASE_PLUS_P (p->exp)) | |
2613 | { | |
2614 | arg1 = p->exp; | |
2615 | continue; | |
2616 | } | |
2617 | } | |
2618 | ||
2619 | /* If we didn't find a useful equivalence for ARG1, we are done. | |
2620 | Otherwise, set up for the next iteration. */ | |
2621 | if (x == 0) | |
2622 | break; | |
2623 | ||
2624 | arg1 = XEXP (x, 0), arg2 = XEXP (x, 1); | |
2625 | if (GET_RTX_CLASS (GET_CODE (x)) == '<') | |
2626 | code = GET_CODE (x); | |
2627 | ||
2628 | if (reverse_code) | |
2629 | code = reverse_condition (code); | |
2630 | } | |
2631 | ||
2632 | /* Return our results. */ | |
2633 | *parg1 = fold_rtx (arg1, 0), *parg2 = fold_rtx (arg2, 0); | |
2634 | ||
2635 | return code; | |
2636 | } | |
2637 | \f | |
2638 | /* Try to simplify a unary operation CODE whose output mode is to be | |
2639 | MODE with input operand OP whose mode was originally OP_MODE. | |
2640 | Return zero if no simplification can be made. */ | |
2641 | ||
2642 | rtx | |
2643 | simplify_unary_operation (code, mode, op, op_mode) | |
2644 | enum rtx_code code; | |
2645 | enum machine_mode mode; | |
2646 | rtx op; | |
2647 | enum machine_mode op_mode; | |
2648 | { | |
2649 | register int width = GET_MODE_BITSIZE (mode); | |
2650 | ||
2651 | /* The order of these tests is critical so that, for example, we don't | |
2652 | check the wrong mode (input vs. output) for a conversion operation, | |
2653 | such as FIX. At some point, this should be simplified. */ | |
2654 | ||
2655 | #if !defined (REAL_IS_NOT_DOUBLE) || defined (REAL_ARITHMETIC) | |
2656 | if (code == FLOAT && GET_CODE (op) == CONST_INT) | |
2657 | { | |
2658 | REAL_VALUE_TYPE d; | |
2659 | ||
2660 | #ifdef REAL_ARITHMETIC | |
2661 | REAL_VALUE_FROM_INT (d, INTVAL (op), INTVAL (op) < 0 ? ~0 : 0); | |
2662 | #else | |
2663 | d = (double) INTVAL (op); | |
2664 | #endif | |
2665 | return CONST_DOUBLE_FROM_REAL_VALUE (d, mode); | |
2666 | } | |
2667 | else if (code == UNSIGNED_FLOAT && GET_CODE (op) == CONST_INT) | |
2668 | { | |
2669 | REAL_VALUE_TYPE d; | |
2670 | ||
2671 | #ifdef REAL_ARITHMETIC | |
2672 | REAL_VALUE_FROM_INT (d, INTVAL (op), 0); | |
2673 | #else | |
2674 | d = (double) (unsigned int) INTVAL (op); | |
2675 | #endif | |
2676 | return CONST_DOUBLE_FROM_REAL_VALUE (d, mode); | |
2677 | } | |
2678 | ||
2679 | else if (code == FLOAT && GET_CODE (op) == CONST_DOUBLE | |
2680 | && GET_MODE (op) == VOIDmode) | |
2681 | { | |
2682 | REAL_VALUE_TYPE d; | |
2683 | ||
2684 | #ifdef REAL_ARITHMETIC | |
2685 | REAL_VALUE_FROM_INT (d, CONST_DOUBLE_LOW (op), CONST_DOUBLE_HIGH (op)); | |
2686 | #else | |
2687 | if (CONST_DOUBLE_HIGH (op) < 0) | |
2688 | { | |
2689 | d = (double) (~ CONST_DOUBLE_HIGH (op)); | |
2690 | d *= ((double) (1 << (HOST_BITS_PER_INT / 2)) | |
2691 | * (double) (1 << (HOST_BITS_PER_INT / 2))); | |
2692 | d += (double) (unsigned) (~ CONST_DOUBLE_LOW (op)); | |
2693 | d = (- d - 1.0); | |
2694 | } | |
2695 | else | |
2696 | { | |
2697 | d = (double) CONST_DOUBLE_HIGH (op); | |
2698 | d *= ((double) (1 << (HOST_BITS_PER_INT / 2)) | |
2699 | * (double) (1 << (HOST_BITS_PER_INT / 2))); | |
2700 | d += (double) (unsigned) CONST_DOUBLE_LOW (op); | |
2701 | } | |
2702 | #endif /* REAL_ARITHMETIC */ | |
2703 | return CONST_DOUBLE_FROM_REAL_VALUE (d, mode); | |
2704 | } | |
2705 | else if (code == UNSIGNED_FLOAT && GET_CODE (op) == CONST_DOUBLE | |
2706 | && GET_MODE (op) == VOIDmode) | |
2707 | { | |
2708 | REAL_VALUE_TYPE d; | |
2709 | ||
2710 | #ifdef REAL_ARITHMETIC | |
2711 | REAL_VALUE_FROM_UNSIGNED_INT (d, CONST_DOUBLE_LOW (op), | |
2712 | CONST_DOUBLE_HIGH (op)); | |
2713 | #else | |
2714 | d = (double) CONST_DOUBLE_HIGH (op); | |
2715 | d *= ((double) (1 << (HOST_BITS_PER_INT / 2)) | |
2716 | * (double) (1 << (HOST_BITS_PER_INT / 2))); | |
2717 | d += (double) (unsigned) CONST_DOUBLE_LOW (op); | |
2718 | #endif /* REAL_ARITHMETIC */ | |
2719 | return CONST_DOUBLE_FROM_REAL_VALUE (d, mode); | |
2720 | } | |
2721 | #endif | |
2722 | ||
2723 | else if (GET_CODE (op) == CONST_INT | |
2724 | && width <= HOST_BITS_PER_INT && width > 0) | |
2725 | { | |
2726 | register int arg0 = INTVAL (op); | |
2727 | register int val; | |
2728 | ||
2729 | switch (code) | |
2730 | { | |
2731 | case NOT: | |
2732 | val = ~ arg0; | |
2733 | break; | |
2734 | ||
2735 | case NEG: | |
2736 | val = - arg0; | |
2737 | break; | |
2738 | ||
2739 | case ABS: | |
2740 | val = (arg0 >= 0 ? arg0 : - arg0); | |
2741 | break; | |
2742 | ||
2743 | case FFS: | |
2744 | /* Don't use ffs here. Instead, get low order bit and then its | |
2745 | number. If arg0 is zero, this will return 0, as desired. */ | |
2746 | arg0 &= GET_MODE_MASK (mode); | |
2747 | val = exact_log2 (arg0 & (- arg0)) + 1; | |
2748 | break; | |
2749 | ||
2750 | case TRUNCATE: | |
2751 | val = arg0; | |
2752 | break; | |
2753 | ||
2754 | case ZERO_EXTEND: | |
2755 | if (op_mode == VOIDmode) | |
2756 | op_mode = mode; | |
2757 | if (GET_MODE_BITSIZE (op_mode) == HOST_BITS_PER_INT) | |
2758 | val = arg0; | |
2759 | else if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_INT) | |
2760 | val = arg0 & ~((-1) << GET_MODE_BITSIZE (op_mode)); | |
2761 | else | |
2762 | return 0; | |
2763 | break; | |
2764 | ||
2765 | case SIGN_EXTEND: | |
2766 | if (op_mode == VOIDmode) | |
2767 | op_mode = mode; | |
2768 | if (GET_MODE_BITSIZE (op_mode) == HOST_BITS_PER_INT) | |
2769 | val = arg0; | |
2770 | else if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_INT) | |
2771 | { | |
2772 | val = arg0 & ~((-1) << GET_MODE_BITSIZE (op_mode)); | |
2773 | if (val & (1 << (GET_MODE_BITSIZE (op_mode) - 1))) | |
2774 | val -= 1 << GET_MODE_BITSIZE (op_mode); | |
2775 | } | |
2776 | else | |
2777 | return 0; | |
2778 | break; | |
2779 | ||
d45cf215 RS |
2780 | case SQRT: |
2781 | return 0; | |
2782 | ||
7afe21cc RK |
2783 | default: |
2784 | abort (); | |
2785 | } | |
2786 | ||
2787 | /* Clear the bits that don't belong in our mode, | |
2788 | unless they and our sign bit are all one. | |
2789 | So we get either a reasonable negative value or a reasonable | |
2790 | unsigned value for this mode. */ | |
2791 | if (width < HOST_BITS_PER_INT | |
2792 | && ((val & ((-1) << (width - 1))) != ((-1) << (width - 1)))) | |
2793 | val &= (1 << width) - 1; | |
2794 | ||
2795 | return gen_rtx (CONST_INT, VOIDmode, val); | |
2796 | } | |
2797 | ||
2798 | /* We can do some operations on integer CONST_DOUBLEs. Also allow | |
2799 | for a DImode operation on a CONST_INT. */ | |
2800 | else if (GET_MODE (op) == VOIDmode | |
2801 | && (GET_CODE (op) == CONST_DOUBLE || GET_CODE (op) == CONST_INT)) | |
2802 | { | |
2803 | int l1, h1, lv, hv; | |
2804 | ||
2805 | if (GET_CODE (op) == CONST_DOUBLE) | |
2806 | l1 = CONST_DOUBLE_LOW (op), h1 = CONST_DOUBLE_HIGH (op); | |
2807 | else | |
2808 | l1 = INTVAL (op), h1 = l1 < 0 ? -1 : 0; | |
2809 | ||
2810 | switch (code) | |
2811 | { | |
2812 | case NOT: | |
2813 | lv = ~ l1; | |
2814 | hv = ~ h1; | |
2815 | break; | |
2816 | ||
2817 | case NEG: | |
2818 | neg_double (l1, h1, &lv, &hv); | |
2819 | break; | |
2820 | ||
2821 | case ABS: | |
2822 | if (h1 < 0) | |
2823 | neg_double (l1, h1, &lv, &hv); | |
2824 | else | |
2825 | lv = l1, hv = h1; | |
2826 | break; | |
2827 | ||
2828 | case FFS: | |
2829 | hv = 0; | |
2830 | if (l1 == 0) | |
2831 | lv = HOST_BITS_PER_INT + exact_log2 (h1 & (-h1)) + 1; | |
2832 | else | |
2833 | lv = exact_log2 (l1 & (-l1)) + 1; | |
2834 | break; | |
2835 | ||
2836 | case TRUNCATE: | |
2837 | if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_INT) | |
2838 | return gen_rtx (CONST_INT, VOIDmode, l1 & GET_MODE_MASK (mode)); | |
2839 | else | |
2840 | return 0; | |
2841 | break; | |
2842 | ||
d45cf215 RS |
2843 | case SQRT: |
2844 | return 0; | |
2845 | ||
7afe21cc RK |
2846 | default: |
2847 | return 0; | |
2848 | } | |
2849 | ||
2850 | return immed_double_const (lv, hv, mode); | |
2851 | } | |
2852 | ||
2853 | #if ! defined (REAL_IS_NOT_DOUBLE) || defined (REAL_ARITHMETIC) | |
2854 | else if (GET_CODE (op) == CONST_DOUBLE | |
2855 | && GET_MODE_CLASS (mode) == MODE_FLOAT) | |
2856 | { | |
2857 | REAL_VALUE_TYPE d; | |
2858 | jmp_buf handler; | |
2859 | rtx x; | |
2860 | ||
2861 | if (setjmp (handler)) | |
2862 | /* There used to be a warning here, but that is inadvisable. | |
2863 | People may want to cause traps, and the natural way | |
2864 | to do it should not get a warning. */ | |
2865 | return 0; | |
2866 | ||
2867 | set_float_handler (handler); | |
2868 | ||
2869 | REAL_VALUE_FROM_CONST_DOUBLE (d, op); | |
2870 | ||
2871 | switch (code) | |
2872 | { | |
2873 | case NEG: | |
2874 | d = REAL_VALUE_NEGATE (d); | |
2875 | break; | |
2876 | ||
2877 | case ABS: | |
8b3686ed | 2878 | if (REAL_VALUE_NEGATIVE (d)) |
7afe21cc RK |
2879 | d = REAL_VALUE_NEGATE (d); |
2880 | break; | |
2881 | ||
2882 | case FLOAT_TRUNCATE: | |
2883 | d = (double) REAL_VALUE_TRUNCATE (mode, d); | |
2884 | break; | |
2885 | ||
2886 | case FLOAT_EXTEND: | |
2887 | /* All this does is change the mode. */ | |
2888 | break; | |
2889 | ||
2890 | case FIX: | |
2891 | d = (double) REAL_VALUE_FIX_TRUNCATE (d); | |
2892 | break; | |
2893 | ||
2894 | case UNSIGNED_FIX: | |
2895 | d = (double) REAL_VALUE_UNSIGNED_FIX_TRUNCATE (d); | |
2896 | break; | |
2897 | ||
d45cf215 RS |
2898 | case SQRT: |
2899 | return 0; | |
2900 | ||
7afe21cc RK |
2901 | default: |
2902 | abort (); | |
2903 | } | |
2904 | ||
2905 | x = immed_real_const_1 (d, mode); | |
2906 | set_float_handler (0); | |
2907 | return x; | |
2908 | } | |
2909 | else if (GET_CODE (op) == CONST_DOUBLE && GET_MODE_CLASS (mode) == MODE_INT | |
2910 | && width <= HOST_BITS_PER_INT && width > 0) | |
2911 | { | |
2912 | REAL_VALUE_TYPE d; | |
2913 | jmp_buf handler; | |
2914 | rtx x; | |
2915 | int val; | |
2916 | ||
2917 | if (setjmp (handler)) | |
2918 | return 0; | |
2919 | ||
2920 | set_float_handler (handler); | |
2921 | ||
2922 | REAL_VALUE_FROM_CONST_DOUBLE (d, op); | |
2923 | ||
2924 | switch (code) | |
2925 | { | |
2926 | case FIX: | |
2927 | val = REAL_VALUE_FIX (d); | |
2928 | break; | |
2929 | ||
2930 | case UNSIGNED_FIX: | |
2931 | val = REAL_VALUE_UNSIGNED_FIX (d); | |
2932 | break; | |
2933 | ||
2934 | default: | |
2935 | abort (); | |
2936 | } | |
2937 | ||
2938 | set_float_handler (0); | |
2939 | ||
2940 | /* Clear the bits that don't belong in our mode, | |
2941 | unless they and our sign bit are all one. | |
2942 | So we get either a reasonable negative value or a reasonable | |
2943 | unsigned value for this mode. */ | |
2944 | if (width < HOST_BITS_PER_INT | |
2945 | && ((val & ((-1) << (width - 1))) != ((-1) << (width - 1)))) | |
2946 | val &= (1 << width) - 1; | |
2947 | ||
2948 | return gen_rtx (CONST_INT, VOIDmode, val); | |
2949 | } | |
2950 | #endif | |
a6acbe15 RS |
2951 | /* This was formerly used only for non-IEEE float. |
2952 | eggert@twinsun.com says it is safe for IEEE also. */ | |
2953 | else | |
7afe21cc RK |
2954 | { |
2955 | /* There are some simplifications we can do even if the operands | |
a6acbe15 | 2956 | aren't constant. */ |
7afe21cc RK |
2957 | switch (code) |
2958 | { | |
2959 | case NEG: | |
2960 | case NOT: | |
2961 | /* (not (not X)) == X, similarly for NEG. */ | |
2962 | if (GET_CODE (op) == code) | |
2963 | return XEXP (op, 0); | |
2964 | break; | |
2965 | ||
2966 | case SIGN_EXTEND: | |
2967 | /* (sign_extend (truncate (minus (label_ref L1) (label_ref L2)))) | |
2968 | becomes just the MINUS if its mode is MODE. This allows | |
2969 | folding switch statements on machines using casesi (such as | |
2970 | the Vax). */ | |
2971 | if (GET_CODE (op) == TRUNCATE | |
2972 | && GET_MODE (XEXP (op, 0)) == mode | |
2973 | && GET_CODE (XEXP (op, 0)) == MINUS | |
2974 | && GET_CODE (XEXP (XEXP (op, 0), 0)) == LABEL_REF | |
2975 | && GET_CODE (XEXP (XEXP (op, 0), 1)) == LABEL_REF) | |
2976 | return XEXP (op, 0); | |
2977 | break; | |
2978 | } | |
2979 | ||
2980 | return 0; | |
2981 | } | |
7afe21cc RK |
2982 | } |
2983 | \f | |
2984 | /* Simplify a binary operation CODE with result mode MODE, operating on OP0 | |
2985 | and OP1. Return 0 if no simplification is possible. | |
2986 | ||
2987 | Don't use this for relational operations such as EQ or LT. | |
2988 | Use simplify_relational_operation instead. */ | |
2989 | ||
2990 | rtx | |
2991 | simplify_binary_operation (code, mode, op0, op1) | |
2992 | enum rtx_code code; | |
2993 | enum machine_mode mode; | |
2994 | rtx op0, op1; | |
2995 | { | |
2996 | register int arg0, arg1, arg0s, arg1s; | |
2997 | int val; | |
2998 | int width = GET_MODE_BITSIZE (mode); | |
2999 | ||
3000 | /* Relational operations don't work here. We must know the mode | |
3001 | of the operands in order to do the comparison correctly. | |
3002 | Assuming a full word can give incorrect results. | |
3003 | Consider comparing 128 with -128 in QImode. */ | |
3004 | ||
3005 | if (GET_RTX_CLASS (code) == '<') | |
3006 | abort (); | |
3007 | ||
3008 | #if ! defined (REAL_IS_NOT_DOUBLE) || defined (REAL_ARITHMETIC) | |
3009 | if (GET_MODE_CLASS (mode) == MODE_FLOAT | |
3010 | && GET_CODE (op0) == CONST_DOUBLE && GET_CODE (op1) == CONST_DOUBLE | |
3011 | && mode == GET_MODE (op0) && mode == GET_MODE (op1)) | |
3012 | { | |
3013 | REAL_VALUE_TYPE f0, f1, value; | |
3014 | jmp_buf handler; | |
3015 | ||
3016 | if (setjmp (handler)) | |
3017 | return 0; | |
3018 | ||
3019 | set_float_handler (handler); | |
3020 | ||
3021 | REAL_VALUE_FROM_CONST_DOUBLE (f0, op0); | |
3022 | REAL_VALUE_FROM_CONST_DOUBLE (f1, op1); | |
3023 | f0 = REAL_VALUE_TRUNCATE (mode, f0); | |
3024 | f1 = REAL_VALUE_TRUNCATE (mode, f1); | |
3025 | ||
3026 | #ifdef REAL_ARITHMETIC | |
3027 | REAL_ARITHMETIC (value, code, f0, f1); | |
3028 | #else | |
3029 | switch (code) | |
3030 | { | |
3031 | case PLUS: | |
3032 | value = f0 + f1; | |
3033 | break; | |
3034 | case MINUS: | |
3035 | value = f0 - f1; | |
3036 | break; | |
3037 | case MULT: | |
3038 | value = f0 * f1; | |
3039 | break; | |
3040 | case DIV: | |
3041 | #ifndef REAL_INFINITY | |
3042 | if (f1 == 0) | |
3043 | abort (); | |
3044 | #endif | |
3045 | value = f0 / f1; | |
3046 | break; | |
3047 | case SMIN: | |
3048 | value = MIN (f0, f1); | |
3049 | break; | |
3050 | case SMAX: | |
3051 | value = MAX (f0, f1); | |
3052 | break; | |
3053 | default: | |
3054 | abort (); | |
3055 | } | |
3056 | #endif | |
3057 | ||
3058 | set_float_handler (0); | |
3059 | value = REAL_VALUE_TRUNCATE (mode, value); | |
3060 | return immed_real_const_1 (value, mode); | |
3061 | } | |
3062 | ||
3063 | /* We can fold some multi-word operations. */ | |
3064 | else if (GET_MODE_CLASS (mode) == MODE_INT | |
3065 | && GET_CODE (op0) == CONST_DOUBLE | |
3066 | && (GET_CODE (op1) == CONST_DOUBLE || GET_CODE (op1) == CONST_INT)) | |
3067 | { | |
3068 | int l1, l2, h1, h2, lv, hv; | |
3069 | ||
3070 | l1 = CONST_DOUBLE_LOW (op0), h1 = CONST_DOUBLE_HIGH (op0); | |
3071 | ||
3072 | if (GET_CODE (op1) == CONST_DOUBLE) | |
3073 | l2 = CONST_DOUBLE_LOW (op1), h2 = CONST_DOUBLE_HIGH (op1); | |
3074 | else | |
3075 | l2 = INTVAL (op1), h2 = l2 < 0 ? -1 : 0; | |
3076 | ||
3077 | switch (code) | |
3078 | { | |
3079 | case MINUS: | |
3080 | /* A - B == A + (-B). */ | |
3081 | neg_double (l2, h2, &lv, &hv); | |
3082 | l2 = lv, h2 = hv; | |
3083 | ||
3084 | /* .. fall through ... */ | |
3085 | ||
3086 | case PLUS: | |
3087 | add_double (l1, h1, l2, h2, &lv, &hv); | |
3088 | break; | |
3089 | ||
3090 | case MULT: | |
3091 | mul_double (l1, h1, l2, h2, &lv, &hv); | |
3092 | break; | |
3093 | ||
3094 | case DIV: case MOD: case UDIV: case UMOD: | |
3095 | /* We'd need to include tree.h to do this and it doesn't seem worth | |
3096 | it. */ | |
3097 | return 0; | |
3098 | ||
3099 | case AND: | |
3100 | lv = l1 & l2, hv = h1 & h2; | |
3101 | break; | |
3102 | ||
3103 | case IOR: | |
3104 | lv = l1 | l2, hv = h1 | h2; | |
3105 | break; | |
3106 | ||
3107 | case XOR: | |
3108 | lv = l1 ^ l2, hv = h1 ^ h2; | |
3109 | break; | |
3110 | ||
3111 | case SMIN: | |
3112 | if (h1 < h2 || (h1 == h2 && (unsigned) l1 < (unsigned) l2)) | |
3113 | lv = l1, hv = h1; | |
3114 | else | |
3115 | lv = l2, hv = h2; | |
3116 | break; | |
3117 | ||
3118 | case SMAX: | |
3119 | if (h1 > h2 || (h1 == h2 && (unsigned) l1 > (unsigned) l2)) | |
3120 | lv = l1, hv = h1; | |
3121 | else | |
3122 | lv = l2, hv = h2; | |
3123 | break; | |
3124 | ||
3125 | case UMIN: | |
3126 | if ((unsigned) h1 < (unsigned) h2 | |
3127 | || (h1 == h2 && (unsigned) l1 < (unsigned) l2)) | |
3128 | lv = l1, hv = h1; | |
3129 | else | |
3130 | lv = l2, hv = h2; | |
3131 | break; | |
3132 | ||
3133 | case UMAX: | |
3134 | if ((unsigned) h1 > (unsigned) h2 | |
3135 | || (h1 == h2 && (unsigned) l1 > (unsigned) l2)) | |
3136 | lv = l1, hv = h1; | |
3137 | else | |
3138 | lv = l2, hv = h2; | |
3139 | break; | |
3140 | ||
3141 | case LSHIFTRT: case ASHIFTRT: | |
3142 | case ASHIFT: case LSHIFT: | |
3143 | case ROTATE: case ROTATERT: | |
3144 | #ifdef SHIFT_COUNT_TRUNCATED | |
3145 | l2 &= (GET_MODE_BITSIZE (mode) - 1), h2 = 0; | |
3146 | #endif | |
3147 | ||
3148 | if (h2 != 0 || l2 < 0 || l2 >= GET_MODE_BITSIZE (mode)) | |
3149 | return 0; | |
3150 | ||
3151 | if (code == LSHIFTRT || code == ASHIFTRT) | |
3152 | rshift_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv, | |
3153 | code == ASHIFTRT); | |
3154 | else if (code == ASHIFT || code == LSHIFT) | |
3155 | lshift_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv, | |
3156 | code == ASHIFT); | |
3157 | else if (code == ROTATE) | |
3158 | lrotate_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv); | |
3159 | else /* code == ROTATERT */ | |
3160 | rrotate_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv); | |
3161 | break; | |
3162 | ||
3163 | default: | |
3164 | return 0; | |
3165 | } | |
3166 | ||
3167 | return immed_double_const (lv, hv, mode); | |
3168 | } | |
3169 | #endif /* not REAL_IS_NOT_DOUBLE, or REAL_ARITHMETIC */ | |
3170 | ||
3171 | if (GET_CODE (op0) != CONST_INT || GET_CODE (op1) != CONST_INT | |
3172 | || width > HOST_BITS_PER_INT || width == 0) | |
3173 | { | |
3174 | /* Even if we can't compute a constant result, | |
3175 | there are some cases worth simplifying. */ | |
3176 | ||
3177 | switch (code) | |
3178 | { | |
3179 | case PLUS: | |
3180 | /* In IEEE floating point, x+0 is not the same as x. Similarly | |
3181 | for the other optimizations below. */ | |
3182 | if (TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT | |
3183 | && GET_MODE_CLASS (mode) != MODE_INT) | |
3184 | break; | |
3185 | ||
3186 | if (op1 == CONST0_RTX (mode)) | |
3187 | return op0; | |
3188 | ||
3189 | /* Strip off any surrounding CONSTs. They don't matter in any of | |
3190 | the cases below. */ | |
3191 | if (GET_CODE (op0) == CONST) | |
3192 | op0 = XEXP (op0, 0); | |
3193 | if (GET_CODE (op1) == CONST) | |
3194 | op1 = XEXP (op1, 0); | |
3195 | ||
3196 | /* ((-a) + b) -> (b - a) and similarly for (a + (-b)) */ | |
3197 | if (GET_CODE (op0) == NEG) | |
3198 | { | |
3199 | rtx tem = simplify_binary_operation (MINUS, mode, | |
3200 | op1, XEXP (op0, 0)); | |
3201 | return tem ? tem : gen_rtx (MINUS, mode, op1, XEXP (op0, 0)); | |
3202 | } | |
3203 | else if (GET_CODE (op1) == NEG) | |
3204 | { | |
3205 | rtx tem = simplify_binary_operation (MINUS, mode, | |
3206 | op0, XEXP (op1, 0)); | |
3207 | return tem ? tem : gen_rtx (MINUS, mode, op0, XEXP (op1, 0)); | |
3208 | } | |
3209 | ||
3210 | /* Don't use the associative law for floating point. | |
3211 | The inaccuracy makes it nonassociative, | |
3212 | and subtle programs can break if operations are associated. */ | |
3213 | if (GET_MODE_CLASS (mode) != MODE_INT) | |
3214 | break; | |
3215 | ||
3216 | /* (a - b) + b -> a, similarly a + (b - a) -> a */ | |
3217 | if (GET_CODE (op0) == MINUS | |
3218 | && rtx_equal_p (XEXP (op0, 1), op1) && ! side_effects_p (op1)) | |
3219 | return XEXP (op0, 0); | |
3220 | ||
3221 | if (GET_CODE (op1) == MINUS | |
3222 | && rtx_equal_p (XEXP (op1, 1), op0) && ! side_effects_p (op0)) | |
3223 | return XEXP (op1, 0); | |
3224 | ||
3225 | /* (c1 - a) + c2 becomes (c1 + c2) - a. */ | |
3226 | if (GET_CODE (op1) == CONST_INT && GET_CODE (op0) == MINUS | |
3227 | && GET_CODE (XEXP (op0, 0)) == CONST_INT) | |
3228 | { | |
3229 | rtx tem = simplify_binary_operation (PLUS, mode, op1, | |
3230 | XEXP (op0, 0)); | |
3231 | ||
3232 | return tem ? gen_rtx (MINUS, mode, tem, XEXP (op0, 1)) : 0; | |
3233 | } | |
3234 | ||
3235 | /* Handle both-operands-constant cases. */ | |
3236 | if (CONSTANT_P (op0) && CONSTANT_P (op1) | |
3237 | && GET_CODE (op0) != CONST_DOUBLE | |
3238 | && GET_CODE (op1) != CONST_DOUBLE | |
3239 | && GET_MODE_CLASS (mode) == MODE_INT) | |
3240 | { | |
3241 | if (GET_CODE (op1) == CONST_INT) | |
3242 | return plus_constant (op0, INTVAL (op1)); | |
3243 | else if (GET_CODE (op0) == CONST_INT) | |
3244 | return plus_constant (op1, INTVAL (op0)); | |
3245 | else | |
3246 | return gen_rtx (CONST, mode, | |
3247 | gen_rtx (PLUS, mode, | |
3248 | GET_CODE (op0) == CONST | |
3249 | ? XEXP (op0, 0) : op0, | |
3250 | GET_CODE (op1) == CONST | |
3251 | ? XEXP (op1, 0) : op1)); | |
3252 | } | |
3253 | else if (GET_CODE (op1) == CONST_INT | |
3254 | && GET_CODE (op0) == PLUS | |
3255 | && (CONSTANT_P (XEXP (op0, 0)) | |
3256 | || CONSTANT_P (XEXP (op0, 1)))) | |
3257 | /* constant + (variable + constant) | |
3258 | can result if an index register is made constant. | |
3259 | We simplify this by adding the constants. | |
3260 | If we did not, it would become an invalid address. */ | |
3261 | return plus_constant (op0, INTVAL (op1)); | |
3262 | break; | |
3263 | ||
3264 | case COMPARE: | |
3265 | #ifdef HAVE_cc0 | |
3266 | /* Convert (compare FOO (const_int 0)) to FOO unless we aren't | |
3267 | using cc0, in which case we want to leave it as a COMPARE | |
3268 | so we can distinguish it from a register-register-copy. | |
3269 | ||
3270 | In IEEE floating point, x-0 is not the same as x. */ | |
3271 | ||
3272 | if ((TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT | |
3273 | || GET_MODE_CLASS (mode) == MODE_INT) | |
3274 | && op1 == CONST0_RTX (mode)) | |
3275 | return op0; | |
3276 | #else | |
3277 | /* Do nothing here. */ | |
3278 | #endif | |
3279 | break; | |
3280 | ||
3281 | case MINUS: | |
21648b45 RK |
3282 | /* None of these optimizations can be done for IEEE |
3283 | floating point. */ | |
3284 | if (TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT | |
3285 | && GET_MODE_CLASS (mode) != MODE_INT) | |
3286 | break; | |
3287 | ||
3288 | /* We can't assume x-x is 0 even with non-IEEE floating point. */ | |
7afe21cc RK |
3289 | if (rtx_equal_p (op0, op1) |
3290 | && ! side_effects_p (op0) | |
7afe21cc RK |
3291 | && GET_MODE_CLASS (mode) != MODE_FLOAT) |
3292 | return const0_rtx; | |
3293 | ||
3294 | /* Change subtraction from zero into negation. */ | |
3295 | if (op0 == CONST0_RTX (mode)) | |
3296 | return gen_rtx (NEG, mode, op1); | |
3297 | ||
7afe21cc RK |
3298 | /* Subtracting 0 has no effect. */ |
3299 | if (op1 == CONST0_RTX (mode)) | |
3300 | return op0; | |
3301 | ||
3302 | /* Strip off any surrounding CONSTs. They don't matter in any of | |
3303 | the cases below. */ | |
3304 | if (GET_CODE (op0) == CONST) | |
3305 | op0 = XEXP (op0, 0); | |
3306 | if (GET_CODE (op1) == CONST) | |
3307 | op1 = XEXP (op1, 0); | |
3308 | ||
3309 | /* (a - (-b)) -> (a + b). */ | |
3310 | if (GET_CODE (op1) == NEG) | |
3311 | { | |
3312 | rtx tem = simplify_binary_operation (PLUS, mode, | |
3313 | op0, XEXP (op1, 0)); | |
3314 | return tem ? tem : gen_rtx (PLUS, mode, op0, XEXP (op1, 0)); | |
3315 | } | |
3316 | ||
3317 | /* Don't use the associative law for floating point. | |
3318 | The inaccuracy makes it nonassociative, | |
3319 | and subtle programs can break if operations are associated. */ | |
3320 | if (GET_MODE_CLASS (mode) != MODE_INT) | |
3321 | break; | |
3322 | ||
3323 | /* (a + b) - a -> b, and (b - (a + b)) -> -a */ | |
3324 | if (GET_CODE (op0) == PLUS | |
3325 | && rtx_equal_p (XEXP (op0, 0), op1) | |
3326 | && ! side_effects_p (op1)) | |
3327 | return XEXP (op0, 1); | |
3328 | else if (GET_CODE (op0) == PLUS | |
3329 | && rtx_equal_p (XEXP (op0, 1), op1) | |
3330 | && ! side_effects_p (op1)) | |
3331 | return XEXP (op0, 0); | |
3332 | ||
3333 | if (GET_CODE (op1) == PLUS | |
3334 | && rtx_equal_p (XEXP (op1, 0), op0) | |
3335 | && ! side_effects_p (op0)) | |
3336 | { | |
3337 | rtx tem = simplify_unary_operation (NEG, mode, XEXP (op1, 1), | |
3338 | mode); | |
3339 | ||
3340 | return tem ? tem : gen_rtx (NEG, mode, XEXP (op1, 1)); | |
3341 | } | |
3342 | else if (GET_CODE (op1) == PLUS | |
3343 | && rtx_equal_p (XEXP (op1, 1), op0) | |
3344 | && ! side_effects_p (op0)) | |
3345 | { | |
3346 | rtx tem = simplify_unary_operation (NEG, mode, XEXP (op1, 0), | |
3347 | mode); | |
3348 | ||
3349 | return tem ? tem : gen_rtx (NEG, mode, XEXP (op1, 0)); | |
3350 | } | |
3351 | ||
3352 | /* a - (a - b) -> b */ | |
3353 | if (GET_CODE (op1) == MINUS && rtx_equal_p (op0, XEXP (op1, 0)) | |
3354 | && ! side_effects_p (op0)) | |
3355 | return XEXP (op1, 1); | |
3356 | ||
3357 | /* (a +/- b) - (a +/- c) can be simplified. Do variants of | |
3358 | this involving commutativity. The most common case is | |
3359 | (a + C1) - (a + C2), but it's not hard to do all the cases. */ | |
3360 | if ((GET_CODE (op0) == PLUS || GET_CODE (op0) == MINUS) | |
3361 | && (GET_CODE (op1) == PLUS || GET_CODE (op1) == MINUS)) | |
3362 | { | |
3363 | rtx lhs0 = XEXP (op0, 0), lhs1 = XEXP (op0, 1); | |
3364 | rtx rhs0 = XEXP (op1, 0), rhs1 = XEXP (op1, 1); | |
3365 | int lhs_neg = GET_CODE (op0) == MINUS; | |
3366 | int rhs_neg = GET_CODE (op1) == MINUS; | |
3367 | rtx lhs = 0, rhs = 0; | |
3368 | ||
3369 | /* Set LHS and RHS to the two different terms. */ | |
3370 | if (rtx_equal_p (lhs0, rhs0) && ! side_effects_p (lhs0)) | |
3371 | lhs = lhs1, rhs = rhs1; | |
3372 | else if (! rhs_neg && rtx_equal_p (lhs0, rhs1) | |
3373 | && ! side_effects_p (lhs0)) | |
3374 | lhs = lhs1, rhs = rhs0; | |
3375 | else if (! lhs_neg && rtx_equal_p (lhs1, rhs0) | |
3376 | && ! side_effects_p (lhs1)) | |
3377 | lhs = lhs0, rhs = rhs1; | |
3378 | else if (! lhs_neg && ! rhs_neg && rtx_equal_p (lhs1, rhs1) | |
3379 | && ! side_effects_p (lhs1)) | |
3380 | lhs = lhs0, rhs = rhs0; | |
3381 | ||
3382 | /* The RHS is the operand of a MINUS, so its negation | |
3383 | status should be complemented. */ | |
3384 | rhs_neg = ! rhs_neg; | |
3385 | ||
3386 | /* If we found two values equal, form the sum or difference | |
3387 | of the remaining two terms. */ | |
3388 | if (lhs) | |
3389 | { | |
3390 | rtx tem = simplify_binary_operation (lhs_neg == rhs_neg | |
3391 | ? PLUS : MINUS, | |
3392 | mode, | |
3393 | lhs_neg ? rhs : lhs, | |
3394 | lhs_neg ? lhs : rhs); | |
3395 | if (tem == 0) | |
3396 | tem = gen_rtx (lhs_neg == rhs_neg | |
3397 | ? PLUS : MINUS, | |
3398 | mode, lhs_neg ? rhs : lhs, | |
3399 | lhs_neg ? lhs : rhs); | |
3400 | ||
3401 | /* If both sides negated, negate result. */ | |
3402 | if (lhs_neg && rhs_neg) | |
3403 | { | |
3404 | rtx tem1 | |
3405 | = simplify_unary_operation (NEG, mode, tem, mode); | |
3406 | if (tem1 == 0) | |
3407 | tem1 = gen_rtx (NEG, mode, tem); | |
3408 | tem = tem1; | |
3409 | } | |
3410 | ||
3411 | return tem; | |
3412 | } | |
3413 | ||
3414 | return 0; | |
3415 | } | |
3416 | ||
3417 | /* c1 - (a + c2) becomes (c1 - c2) - a. */ | |
3418 | if (GET_CODE (op0) == CONST_INT && GET_CODE (op1) == PLUS | |
3419 | && GET_CODE (XEXP (op1, 1)) == CONST_INT) | |
3420 | { | |
3421 | rtx tem = simplify_binary_operation (MINUS, mode, op0, | |
3422 | XEXP (op1, 1)); | |
3423 | ||
3424 | return tem ? gen_rtx (MINUS, mode, tem, XEXP (op1, 0)) : 0; | |
3425 | } | |
3426 | ||
3427 | /* c1 - (c2 - a) becomes (c1 - c2) + a. */ | |
3428 | if (GET_CODE (op0) == CONST_INT && GET_CODE (op1) == MINUS | |
3429 | && GET_CODE (XEXP (op1, 0)) == CONST_INT) | |
3430 | { | |
3431 | rtx tem = simplify_binary_operation (MINUS, mode, op0, | |
3432 | XEXP (op1, 0)); | |
3433 | ||
3434 | return (tem && GET_CODE (tem) == CONST_INT | |
3435 | ? plus_constant (XEXP (op1, 1), INTVAL (tem)) | |
3436 | : 0); | |
3437 | } | |
3438 | ||
3439 | /* Don't let a relocatable value get a negative coeff. */ | |
3440 | if (GET_CODE (op1) == CONST_INT) | |
3441 | return plus_constant (op0, - INTVAL (op1)); | |
3442 | break; | |
3443 | ||
3444 | case MULT: | |
3445 | if (op1 == constm1_rtx) | |
3446 | { | |
3447 | rtx tem = simplify_unary_operation (NEG, mode, op0, mode); | |
3448 | ||
3449 | return tem ? tem : gen_rtx (NEG, mode, op0); | |
3450 | } | |
3451 | ||
3452 | /* In IEEE floating point, x*0 is not always 0. */ | |
3453 | if ((TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT | |
3454 | || GET_MODE_CLASS (mode) == MODE_INT) | |
3455 | && op1 == CONST0_RTX (mode) | |
3456 | && ! side_effects_p (op0)) | |
3457 | return op1; | |
3458 | ||
3459 | /* In IEEE floating point, x*1 is not equivalent to x for nans. | |
3460 | However, ANSI says we can drop signals, | |
3461 | so we can do this anyway. */ | |
3462 | if (op1 == CONST1_RTX (mode)) | |
3463 | return op0; | |
3464 | ||
3465 | /* Convert multiply by constant power of two into shift. */ | |
3466 | if (GET_CODE (op1) == CONST_INT | |
3467 | && (val = exact_log2 (INTVAL (op1))) >= 0) | |
3468 | return gen_rtx (ASHIFT, mode, op0, | |
3469 | gen_rtx (CONST_INT, VOIDmode, val)); | |
3470 | ||
3471 | if (GET_CODE (op1) == CONST_DOUBLE | |
3472 | && GET_MODE_CLASS (GET_MODE (op1)) == MODE_FLOAT) | |
3473 | { | |
3474 | REAL_VALUE_TYPE d; | |
3475 | REAL_VALUE_FROM_CONST_DOUBLE (d, op1); | |
3476 | ||
3477 | /* x*2 is x+x and x*(-1) is -x */ | |
3478 | if (REAL_VALUES_EQUAL (d, dconst2) | |
3479 | && GET_MODE (op0) == mode) | |
3480 | return gen_rtx (PLUS, mode, op0, copy_rtx (op0)); | |
3481 | ||
3482 | else if (REAL_VALUES_EQUAL (d, dconstm1) | |
3483 | && GET_MODE (op0) == mode) | |
3484 | return gen_rtx (NEG, mode, op0); | |
3485 | } | |
3486 | break; | |
3487 | ||
3488 | case IOR: | |
3489 | if (op1 == const0_rtx) | |
3490 | return op0; | |
3491 | if (GET_CODE (op1) == CONST_INT | |
3492 | && (INTVAL (op1) & GET_MODE_MASK (mode)) == GET_MODE_MASK (mode)) | |
3493 | return op1; | |
3494 | if (rtx_equal_p (op0, op1) && ! side_effects_p (op0)) | |
3495 | return op0; | |
3496 | /* A | (~A) -> -1 */ | |
3497 | if (((GET_CODE (op0) == NOT && rtx_equal_p (XEXP (op0, 0), op1)) | |
3498 | || (GET_CODE (op1) == NOT && rtx_equal_p (XEXP (op1, 0), op0))) | |
3499 | && ! side_effects_p (op0)) | |
3500 | return constm1_rtx; | |
3501 | break; | |
3502 | ||
3503 | case XOR: | |
3504 | if (op1 == const0_rtx) | |
3505 | return op0; | |
3506 | if (GET_CODE (op1) == CONST_INT | |
3507 | && (INTVAL (op1) & GET_MODE_MASK (mode)) == GET_MODE_MASK (mode)) | |
3508 | return gen_rtx (NOT, mode, op0); | |
3509 | if (op0 == op1 && ! side_effects_p (op0)) | |
3510 | return const0_rtx; | |
3511 | break; | |
3512 | ||
3513 | case AND: | |
3514 | if (op1 == const0_rtx && ! side_effects_p (op0)) | |
3515 | return const0_rtx; | |
3516 | if (GET_CODE (op1) == CONST_INT | |
3517 | && (INTVAL (op1) & GET_MODE_MASK (mode)) == GET_MODE_MASK (mode)) | |
3518 | return op0; | |
3519 | if (op0 == op1 && ! side_effects_p (op0)) | |
3520 | return op0; | |
3521 | /* A & (~A) -> 0 */ | |
3522 | if (((GET_CODE (op0) == NOT && rtx_equal_p (XEXP (op0, 0), op1)) | |
3523 | || (GET_CODE (op1) == NOT && rtx_equal_p (XEXP (op1, 0), op0))) | |
3524 | && ! side_effects_p (op0)) | |
3525 | return const0_rtx; | |
3526 | break; | |
3527 | ||
3528 | case UDIV: | |
3529 | /* Convert divide by power of two into shift (divide by 1 handled | |
3530 | below). */ | |
3531 | if (GET_CODE (op1) == CONST_INT | |
3532 | && (arg1 = exact_log2 (INTVAL (op1))) > 0) | |
3533 | return gen_rtx (LSHIFTRT, mode, op0, | |
3534 | gen_rtx (CONST_INT, VOIDmode, arg1)); | |
3535 | ||
3536 | /* ... fall through ... */ | |
3537 | ||
3538 | case DIV: | |
3539 | if (op1 == CONST1_RTX (mode)) | |
3540 | return op0; | |
3541 | else if (op0 == CONST0_RTX (mode) | |
3542 | && ! side_effects_p (op1)) | |
3543 | return op0; | |
3544 | #if 0 /* Turned off till an expert says this is a safe thing to do. */ | |
3545 | #if ! defined (REAL_IS_NOT_DOUBLE) || defined (REAL_ARITHMETIC) | |
3546 | /* Change division by a constant into multiplication. */ | |
3547 | else if (GET_CODE (op1) == CONST_DOUBLE | |
3548 | && GET_MODE_CLASS (GET_MODE (op1)) == MODE_FLOAT | |
3549 | && op1 != CONST0_RTX (mode)) | |
3550 | { | |
3551 | REAL_VALUE_TYPE d; | |
3552 | REAL_VALUE_FROM_CONST_DOUBLE (d, op1); | |
3553 | if (REAL_VALUES_EQUAL (d, dconst0)) | |
3554 | abort(); | |
3555 | #if defined (REAL_ARITHMETIC) | |
3556 | REAL_ARITHMETIC (d, RDIV_EXPR, dconst1, d); | |
3557 | return gen_rtx (MULT, mode, op0, | |
3558 | CONST_DOUBLE_FROM_REAL_VALUE (d, mode)); | |
3559 | #else | |
3560 | return gen_rtx (MULT, mode, op0, | |
3561 | CONST_DOUBLE_FROM_REAL_VALUE (1./d, mode)); | |
3562 | } | |
3563 | #endif | |
3564 | #endif | |
3565 | #endif | |
3566 | break; | |
3567 | ||
3568 | case UMOD: | |
3569 | /* Handle modulus by power of two (mod with 1 handled below). */ | |
3570 | if (GET_CODE (op1) == CONST_INT | |
3571 | && exact_log2 (INTVAL (op1)) > 0) | |
3572 | return gen_rtx (AND, mode, op0, | |
3573 | gen_rtx (CONST_INT, VOIDmode, INTVAL (op1) - 1)); | |
3574 | ||
3575 | /* ... fall through ... */ | |
3576 | ||
3577 | case MOD: | |
3578 | if ((op0 == const0_rtx || op1 == const1_rtx) | |
3579 | && ! side_effects_p (op0) && ! side_effects_p (op1)) | |
3580 | return const0_rtx; | |
3581 | break; | |
3582 | ||
3583 | case ROTATERT: | |
3584 | case ROTATE: | |
3585 | /* Rotating ~0 always results in ~0. */ | |
3586 | if (GET_CODE (op0) == CONST_INT && width <= HOST_BITS_PER_INT | |
3587 | && INTVAL (op0) == GET_MODE_MASK (mode) | |
3588 | && ! side_effects_p (op1)) | |
3589 | return op0; | |
3590 | ||
3591 | /* ... fall through ... */ | |
3592 | ||
3593 | case LSHIFT: | |
3594 | case ASHIFT: | |
3595 | case ASHIFTRT: | |
3596 | case LSHIFTRT: | |
3597 | if (op1 == const0_rtx) | |
3598 | return op0; | |
3599 | if (op0 == const0_rtx && ! side_effects_p (op1)) | |
3600 | return op0; | |
3601 | break; | |
3602 | ||
3603 | case SMIN: | |
3604 | if (width <= HOST_BITS_PER_INT && GET_CODE (op1) == CONST_INT | |
3605 | && INTVAL (op1) == 1 << (width -1) | |
3606 | && ! side_effects_p (op0)) | |
3607 | return op1; | |
3608 | else if (rtx_equal_p (op0, op1) && ! side_effects_p (op0)) | |
3609 | return op0; | |
3610 | break; | |
3611 | ||
3612 | case SMAX: | |
3613 | if (width <= HOST_BITS_PER_INT && GET_CODE (op1) == CONST_INT | |
3614 | && INTVAL (op1) == GET_MODE_MASK (mode) >> 1 | |
3615 | && ! side_effects_p (op0)) | |
3616 | return op1; | |
3617 | else if (rtx_equal_p (op0, op1) && ! side_effects_p (op0)) | |
3618 | return op0; | |
3619 | break; | |
3620 | ||
3621 | case UMIN: | |
3622 | if (op1 == const0_rtx && ! side_effects_p (op0)) | |
3623 | return op1; | |
3624 | else if (rtx_equal_p (op0, op1) && ! side_effects_p (op0)) | |
3625 | return op0; | |
3626 | break; | |
3627 | ||
3628 | case UMAX: | |
3629 | if (op1 == constm1_rtx && ! side_effects_p (op0)) | |
3630 | return op1; | |
3631 | else if (rtx_equal_p (op0, op1) && ! side_effects_p (op0)) | |
3632 | return op0; | |
3633 | break; | |
3634 | ||
3635 | default: | |
3636 | abort (); | |
3637 | } | |
3638 | ||
3639 | return 0; | |
3640 | } | |
3641 | ||
3642 | /* Get the integer argument values in two forms: | |
3643 | zero-extended in ARG0, ARG1 and sign-extended in ARG0S, ARG1S. */ | |
3644 | ||
3645 | arg0 = INTVAL (op0); | |
3646 | arg1 = INTVAL (op1); | |
3647 | ||
3648 | if (width < HOST_BITS_PER_INT) | |
3649 | { | |
3650 | arg0 &= (1 << width) - 1; | |
3651 | arg1 &= (1 << width) - 1; | |
3652 | ||
3653 | arg0s = arg0; | |
3654 | if (arg0s & (1 << (width - 1))) | |
3655 | arg0s |= ((-1) << width); | |
3656 | ||
3657 | arg1s = arg1; | |
3658 | if (arg1s & (1 << (width - 1))) | |
3659 | arg1s |= ((-1) << width); | |
3660 | } | |
3661 | else | |
3662 | { | |
3663 | arg0s = arg0; | |
3664 | arg1s = arg1; | |
3665 | } | |
3666 | ||
3667 | /* Compute the value of the arithmetic. */ | |
3668 | ||
3669 | switch (code) | |
3670 | { | |
3671 | case PLUS: | |
538b78e7 | 3672 | val = arg0s + arg1s; |
7afe21cc RK |
3673 | break; |
3674 | ||
3675 | case MINUS: | |
538b78e7 | 3676 | val = arg0s - arg1s; |
7afe21cc RK |
3677 | break; |
3678 | ||
3679 | case MULT: | |
3680 | val = arg0s * arg1s; | |
3681 | break; | |
3682 | ||
3683 | case DIV: | |
3684 | if (arg1s == 0) | |
3685 | return 0; | |
3686 | val = arg0s / arg1s; | |
3687 | break; | |
3688 | ||
3689 | case MOD: | |
3690 | if (arg1s == 0) | |
3691 | return 0; | |
3692 | val = arg0s % arg1s; | |
3693 | break; | |
3694 | ||
3695 | case UDIV: | |
3696 | if (arg1 == 0) | |
3697 | return 0; | |
3698 | val = (unsigned) arg0 / arg1; | |
3699 | break; | |
3700 | ||
3701 | case UMOD: | |
3702 | if (arg1 == 0) | |
3703 | return 0; | |
3704 | val = (unsigned) arg0 % arg1; | |
3705 | break; | |
3706 | ||
3707 | case AND: | |
3708 | val = arg0 & arg1; | |
3709 | break; | |
3710 | ||
3711 | case IOR: | |
3712 | val = arg0 | arg1; | |
3713 | break; | |
3714 | ||
3715 | case XOR: | |
3716 | val = arg0 ^ arg1; | |
3717 | break; | |
3718 | ||
3719 | case LSHIFTRT: | |
3720 | /* If shift count is undefined, don't fold it; let the machine do | |
3721 | what it wants. But truncate it if the machine will do that. */ | |
3722 | if (arg1 < 0) | |
3723 | return 0; | |
3724 | ||
3725 | #ifdef SHIFT_COUNT_TRUNCATED | |
3726 | arg1 &= (BITS_PER_WORD - 1); | |
3727 | #endif | |
3728 | ||
3729 | if (arg1 >= width) | |
3730 | return 0; | |
3731 | ||
3732 | val = ((unsigned) arg0) >> arg1; | |
3733 | break; | |
3734 | ||
3735 | case ASHIFT: | |
3736 | case LSHIFT: | |
3737 | if (arg1 < 0) | |
3738 | return 0; | |
3739 | ||
3740 | #ifdef SHIFT_COUNT_TRUNCATED | |
3741 | arg1 &= (BITS_PER_WORD - 1); | |
3742 | #endif | |
3743 | ||
3744 | if (arg1 >= width) | |
3745 | return 0; | |
3746 | ||
3747 | val = ((unsigned) arg0) << arg1; | |
3748 | break; | |
3749 | ||
3750 | case ASHIFTRT: | |
3751 | if (arg1 < 0) | |
3752 | return 0; | |
3753 | ||
3754 | #ifdef SHIFT_COUNT_TRUNCATED | |
3755 | arg1 &= (BITS_PER_WORD - 1); | |
3756 | #endif | |
3757 | ||
3758 | if (arg1 >= width) | |
3759 | return 0; | |
3760 | ||
3761 | val = arg0s >> arg1; | |
3762 | break; | |
3763 | ||
3764 | case ROTATERT: | |
3765 | if (arg1 < 0) | |
3766 | return 0; | |
3767 | ||
3768 | arg1 %= width; | |
3769 | val = ((((unsigned) arg0) << (width - arg1)) | |
3770 | | (((unsigned) arg0) >> arg1)); | |
3771 | break; | |
3772 | ||
3773 | case ROTATE: | |
3774 | if (arg1 < 0) | |
3775 | return 0; | |
3776 | ||
3777 | arg1 %= width; | |
3778 | val = ((((unsigned) arg0) << arg1) | |
3779 | | (((unsigned) arg0) >> (width - arg1))); | |
3780 | break; | |
3781 | ||
3782 | case COMPARE: | |
3783 | /* Do nothing here. */ | |
3784 | return 0; | |
3785 | ||
830a38ee RS |
3786 | case SMIN: |
3787 | val = arg0s <= arg1s ? arg0s : arg1s; | |
3788 | break; | |
3789 | ||
3790 | case UMIN: | |
3791 | val = (unsigned int)arg0 <= (unsigned int)arg1 ? arg0 : arg1; | |
3792 | break; | |
3793 | ||
3794 | case SMAX: | |
3795 | val = arg0s > arg1s ? arg0s : arg1s; | |
3796 | break; | |
3797 | ||
3798 | case UMAX: | |
3799 | val = (unsigned int)arg0 > (unsigned int)arg1 ? arg0 : arg1; | |
3800 | break; | |
3801 | ||
7afe21cc RK |
3802 | default: |
3803 | abort (); | |
3804 | } | |
3805 | ||
3806 | /* Clear the bits that don't belong in our mode, unless they and our sign | |
3807 | bit are all one. So we get either a reasonable negative value or a | |
3808 | reasonable unsigned value for this mode. */ | |
3809 | if (width < HOST_BITS_PER_INT | |
3810 | && ((val & ((-1) << (width - 1))) != ((-1) << (width - 1)))) | |
3811 | val &= (1 << width) - 1; | |
3812 | ||
3813 | return gen_rtx (CONST_INT, VOIDmode, val); | |
3814 | } | |
3815 | \f | |
3816 | /* Like simplify_binary_operation except used for relational operators. | |
3817 | MODE is the mode of the operands, not that of the result. */ | |
3818 | ||
3819 | rtx | |
3820 | simplify_relational_operation (code, mode, op0, op1) | |
3821 | enum rtx_code code; | |
3822 | enum machine_mode mode; | |
3823 | rtx op0, op1; | |
3824 | { | |
3825 | register int arg0, arg1, arg0s, arg1s; | |
3826 | int val; | |
3827 | int width = GET_MODE_BITSIZE (mode); | |
3828 | ||
3829 | /* If op0 is a compare, extract the comparison arguments from it. */ | |
3830 | if (GET_CODE (op0) == COMPARE && op1 == const0_rtx) | |
3831 | op1 = XEXP (op0, 1), op0 = XEXP (op0, 0); | |
3832 | ||
3833 | if (GET_CODE (op0) != CONST_INT || GET_CODE (op1) != CONST_INT | |
3834 | || width > HOST_BITS_PER_INT || width == 0) | |
3835 | { | |
3836 | /* Even if we can't compute a constant result, | |
3837 | there are some cases worth simplifying. */ | |
3838 | ||
3839 | /* For non-IEEE floating-point, if the two operands are equal, we know | |
3840 | the result. */ | |
3841 | if (rtx_equal_p (op0, op1) | |
3842 | && (TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT | |
3843 | || GET_MODE_CLASS (GET_MODE (op0)) != MODE_FLOAT)) | |
3844 | return (code == EQ || code == GE || code == LE || code == LEU | |
3845 | || code == GEU) ? const_true_rtx : const0_rtx; | |
3846 | else if (GET_CODE (op0) == CONST_DOUBLE | |
3847 | && GET_CODE (op1) == CONST_DOUBLE | |
3848 | && GET_MODE_CLASS (GET_MODE (op0)) == MODE_FLOAT) | |
3849 | { | |
3850 | REAL_VALUE_TYPE d0, d1; | |
3851 | int value; | |
3852 | jmp_buf handler; | |
3853 | int op0lt, op1lt, equal; | |
3854 | ||
3855 | if (setjmp (handler)) | |
3856 | return 0; | |
3857 | ||
3858 | set_float_handler (handler); | |
3859 | REAL_VALUE_FROM_CONST_DOUBLE (d0, op0); | |
3860 | REAL_VALUE_FROM_CONST_DOUBLE (d1, op1); | |
3861 | equal = REAL_VALUES_EQUAL (d0, d1); | |
3862 | op0lt = REAL_VALUES_LESS (d0, d1); | |
3863 | op1lt = REAL_VALUES_LESS (d1, d0); | |
3864 | set_float_handler (0); | |
3865 | ||
3866 | switch (code) | |
3867 | { | |
3868 | case EQ: | |
3869 | return equal ? const_true_rtx : const0_rtx; | |
3870 | case NE: | |
3871 | return !equal ? const_true_rtx : const0_rtx; | |
3872 | case LE: | |
3873 | return equal || op0lt ? const_true_rtx : const0_rtx; | |
3874 | case LT: | |
3875 | return op0lt ? const_true_rtx : const0_rtx; | |
3876 | case GE: | |
3877 | return equal || op1lt ? const_true_rtx : const0_rtx; | |
3878 | case GT: | |
3879 | return op1lt ? const_true_rtx : const0_rtx; | |
3880 | } | |
3881 | } | |
3882 | ||
3883 | switch (code) | |
3884 | { | |
3885 | case EQ: | |
3886 | { | |
3887 | #if 0 | |
3888 | /* We can't make this assumption due to #pragma weak */ | |
3889 | if (CONSTANT_P (op0) && op1 == const0_rtx) | |
3890 | return const0_rtx; | |
3891 | #endif | |
8b3686ed RK |
3892 | if (NONZERO_BASE_PLUS_P (op0) && op1 == const0_rtx |
3893 | /* On some machines, the ap reg can be 0 sometimes. */ | |
3894 | && op0 != arg_pointer_rtx) | |
7afe21cc RK |
3895 | return const0_rtx; |
3896 | break; | |
3897 | } | |
3898 | ||
3899 | case NE: | |
3900 | #if 0 | |
3901 | /* We can't make this assumption due to #pragma weak */ | |
3902 | if (CONSTANT_P (op0) && op1 == const0_rtx) | |
3903 | return const_true_rtx; | |
3904 | #endif | |
8b3686ed RK |
3905 | if (NONZERO_BASE_PLUS_P (op0) && op1 == const0_rtx |
3906 | /* On some machines, the ap reg can be 0 sometimes. */ | |
3907 | && op0 != arg_pointer_rtx) | |
7afe21cc RK |
3908 | return const_true_rtx; |
3909 | break; | |
3910 | ||
3911 | case GEU: | |
3912 | /* Unsigned values are never negative, but we must be sure we are | |
3913 | actually comparing a value, not a CC operand. */ | |
3914 | if (op1 == const0_rtx | |
3915 | && GET_MODE_CLASS (mode) == MODE_INT) | |
3916 | return const_true_rtx; | |
3917 | break; | |
3918 | ||
3919 | case LTU: | |
3920 | if (op1 == const0_rtx | |
3921 | && GET_MODE_CLASS (mode) == MODE_INT) | |
3922 | return const0_rtx; | |
3923 | break; | |
3924 | ||
3925 | case LEU: | |
3926 | /* Unsigned values are never greater than the largest | |
3927 | unsigned value. */ | |
3928 | if (GET_CODE (op1) == CONST_INT | |
3929 | && INTVAL (op1) == GET_MODE_MASK (mode) | |
3930 | && GET_MODE_CLASS (mode) == MODE_INT) | |
3931 | return const_true_rtx; | |
3932 | break; | |
3933 | ||
3934 | case GTU: | |
3935 | if (GET_CODE (op1) == CONST_INT | |
3936 | && INTVAL (op1) == GET_MODE_MASK (mode) | |
3937 | && GET_MODE_CLASS (mode) == MODE_INT) | |
3938 | return const0_rtx; | |
3939 | break; | |
3940 | } | |
3941 | ||
3942 | return 0; | |
3943 | } | |
3944 | ||
3945 | /* Get the integer argument values in two forms: | |
3946 | zero-extended in ARG0, ARG1 and sign-extended in ARG0S, ARG1S. */ | |
3947 | ||
3948 | arg0 = INTVAL (op0); | |
3949 | arg1 = INTVAL (op1); | |
3950 | ||
3951 | if (width < HOST_BITS_PER_INT) | |
3952 | { | |
3953 | arg0 &= (1 << width) - 1; | |
3954 | arg1 &= (1 << width) - 1; | |
3955 | ||
3956 | arg0s = arg0; | |
3957 | if (arg0s & (1 << (width - 1))) | |
3958 | arg0s |= ((-1) << width); | |
3959 | ||
3960 | arg1s = arg1; | |
3961 | if (arg1s & (1 << (width - 1))) | |
3962 | arg1s |= ((-1) << width); | |
3963 | } | |
3964 | else | |
3965 | { | |
3966 | arg0s = arg0; | |
3967 | arg1s = arg1; | |
3968 | } | |
3969 | ||
3970 | /* Compute the value of the arithmetic. */ | |
3971 | ||
3972 | switch (code) | |
3973 | { | |
3974 | case NE: | |
3975 | val = arg0 != arg1 ? STORE_FLAG_VALUE : 0; | |
3976 | break; | |
3977 | ||
3978 | case EQ: | |
3979 | val = arg0 == arg1 ? STORE_FLAG_VALUE : 0; | |
3980 | break; | |
3981 | ||
3982 | case LE: | |
3983 | val = arg0s <= arg1s ? STORE_FLAG_VALUE : 0; | |
3984 | break; | |
3985 | ||
3986 | case LT: | |
3987 | val = arg0s < arg1s ? STORE_FLAG_VALUE : 0; | |
3988 | break; | |
3989 | ||
3990 | case GE: | |
3991 | val = arg0s >= arg1s ? STORE_FLAG_VALUE : 0; | |
3992 | break; | |
3993 | ||
3994 | case GT: | |
3995 | val = arg0s > arg1s ? STORE_FLAG_VALUE : 0; | |
3996 | break; | |
3997 | ||
3998 | case LEU: | |
3999 | val = ((unsigned) arg0) <= ((unsigned) arg1) ? STORE_FLAG_VALUE : 0; | |
4000 | break; | |
4001 | ||
4002 | case LTU: | |
4003 | val = ((unsigned) arg0) < ((unsigned) arg1) ? STORE_FLAG_VALUE : 0; | |
4004 | break; | |
4005 | ||
4006 | case GEU: | |
4007 | val = ((unsigned) arg0) >= ((unsigned) arg1) ? STORE_FLAG_VALUE : 0; | |
4008 | break; | |
4009 | ||
4010 | case GTU: | |
4011 | val = ((unsigned) arg0) > ((unsigned) arg1) ? STORE_FLAG_VALUE : 0; | |
4012 | break; | |
4013 | ||
4014 | default: | |
4015 | abort (); | |
4016 | } | |
4017 | ||
4018 | /* Clear the bits that don't belong in our mode, unless they and our sign | |
4019 | bit are all one. So we get either a reasonable negative value or a | |
4020 | reasonable unsigned value for this mode. */ | |
4021 | if (width < HOST_BITS_PER_INT | |
4022 | && ((val & ((-1) << (width - 1))) != ((-1) << (width - 1)))) | |
4023 | val &= (1 << width) - 1; | |
4024 | ||
4025 | return gen_rtx (CONST_INT, VOIDmode, val); | |
4026 | } | |
4027 | \f | |
4028 | /* Simplify CODE, an operation with result mode MODE and three operands, | |
4029 | OP0, OP1, and OP2. OP0_MODE was the mode of OP0 before it became | |
4030 | a constant. Return 0 if no simplifications is possible. */ | |
4031 | ||
4032 | rtx | |
4033 | simplify_ternary_operation (code, mode, op0_mode, op0, op1, op2) | |
4034 | enum rtx_code code; | |
4035 | enum machine_mode mode, op0_mode; | |
4036 | rtx op0, op1, op2; | |
4037 | { | |
4038 | int width = GET_MODE_BITSIZE (mode); | |
4039 | ||
4040 | /* VOIDmode means "infinite" precision. */ | |
4041 | if (width == 0) | |
4042 | width = HOST_BITS_PER_INT; | |
4043 | ||
4044 | switch (code) | |
4045 | { | |
4046 | case SIGN_EXTRACT: | |
4047 | case ZERO_EXTRACT: | |
4048 | if (GET_CODE (op0) == CONST_INT | |
4049 | && GET_CODE (op1) == CONST_INT | |
4050 | && GET_CODE (op2) == CONST_INT | |
4051 | && INTVAL (op1) + INTVAL (op2) <= GET_MODE_BITSIZE (op0_mode) | |
4052 | && width <= HOST_BITS_PER_INT) | |
4053 | { | |
4054 | /* Extracting a bit-field from a constant */ | |
4055 | int val = INTVAL (op0); | |
4056 | ||
4057 | #if BITS_BIG_ENDIAN | |
4058 | val >>= (GET_MODE_BITSIZE (op0_mode) - INTVAL (op2) - INTVAL (op1)); | |
4059 | #else | |
4060 | val >>= INTVAL (op2); | |
4061 | #endif | |
4062 | if (HOST_BITS_PER_INT != INTVAL (op1)) | |
4063 | { | |
4064 | /* First zero-extend. */ | |
4065 | val &= (1 << INTVAL (op1)) - 1; | |
4066 | /* If desired, propagate sign bit. */ | |
4067 | if (code == SIGN_EXTRACT && (val & (1 << (INTVAL (op1) - 1)))) | |
fc3ffe83 | 4068 | val |= ~ ((1 << INTVAL (op1)) - 1); |
7afe21cc RK |
4069 | } |
4070 | ||
4071 | /* Clear the bits that don't belong in our mode, | |
4072 | unless they and our sign bit are all one. | |
4073 | So we get either a reasonable negative value or a reasonable | |
4074 | unsigned value for this mode. */ | |
4075 | if (width < HOST_BITS_PER_INT | |
4076 | && ((val & ((-1) << (width - 1))) != ((-1) << (width - 1)))) | |
4077 | val &= (1 << width) - 1; | |
4078 | ||
4079 | return gen_rtx (CONST_INT, VOIDmode, val); | |
4080 | } | |
4081 | break; | |
4082 | ||
4083 | case IF_THEN_ELSE: | |
4084 | if (GET_CODE (op0) == CONST_INT) | |
4085 | return op0 != const0_rtx ? op1 : op2; | |
4086 | break; | |
4087 | ||
4088 | default: | |
4089 | abort (); | |
4090 | } | |
4091 | ||
4092 | return 0; | |
4093 | } | |
4094 | \f | |
4095 | /* If X is a nontrivial arithmetic operation on an argument | |
4096 | for which a constant value can be determined, return | |
4097 | the result of operating on that value, as a constant. | |
4098 | Otherwise, return X, possibly with one or more operands | |
4099 | modified by recursive calls to this function. | |
4100 | ||
4101 | If X is a register whose contents are known, we do NOT | |
4102 | return those contents. This is because an instruction that | |
4103 | uses a register is usually faster than one that uses a constant. | |
4104 | ||
4105 | INSN is the insn that we may be modifying. If it is 0, make a copy | |
4106 | of X before modifying it. */ | |
4107 | ||
4108 | static rtx | |
4109 | fold_rtx (x, insn) | |
4110 | rtx x; | |
4111 | rtx insn; | |
4112 | { | |
4113 | register enum rtx_code code; | |
4114 | register enum machine_mode mode; | |
4115 | register char *fmt; | |
4116 | register int i, val; | |
4117 | rtx new = 0; | |
4118 | int copied = 0; | |
4119 | int must_swap = 0; | |
4120 | ||
4121 | /* Folded equivalents of first two operands of X. */ | |
4122 | rtx folded_arg0; | |
4123 | rtx folded_arg1; | |
4124 | ||
4125 | /* Constant equivalents of first three operands of X; | |
4126 | 0 when no such equivalent is known. */ | |
4127 | rtx const_arg0; | |
4128 | rtx const_arg1; | |
4129 | rtx const_arg2; | |
4130 | ||
4131 | /* The mode of the first operand of X. We need this for sign and zero | |
4132 | extends. */ | |
4133 | enum machine_mode mode_arg0; | |
4134 | ||
4135 | if (x == 0) | |
4136 | return x; | |
4137 | ||
4138 | mode = GET_MODE (x); | |
4139 | code = GET_CODE (x); | |
4140 | switch (code) | |
4141 | { | |
4142 | case CONST: | |
4143 | case CONST_INT: | |
4144 | case CONST_DOUBLE: | |
4145 | case SYMBOL_REF: | |
4146 | case LABEL_REF: | |
4147 | case REG: | |
4148 | /* No use simplifying an EXPR_LIST | |
4149 | since they are used only for lists of args | |
4150 | in a function call's REG_EQUAL note. */ | |
4151 | case EXPR_LIST: | |
4152 | return x; | |
4153 | ||
4154 | #ifdef HAVE_cc0 | |
4155 | case CC0: | |
4156 | return prev_insn_cc0; | |
4157 | #endif | |
4158 | ||
4159 | case PC: | |
4160 | /* If the next insn is a CODE_LABEL followed by a jump table, | |
4161 | PC's value is a LABEL_REF pointing to that label. That | |
4162 | lets us fold switch statements on the Vax. */ | |
4163 | if (insn && GET_CODE (insn) == JUMP_INSN) | |
4164 | { | |
4165 | rtx next = next_nonnote_insn (insn); | |
4166 | ||
4167 | if (next && GET_CODE (next) == CODE_LABEL | |
4168 | && NEXT_INSN (next) != 0 | |
4169 | && GET_CODE (NEXT_INSN (next)) == JUMP_INSN | |
4170 | && (GET_CODE (PATTERN (NEXT_INSN (next))) == ADDR_VEC | |
4171 | || GET_CODE (PATTERN (NEXT_INSN (next))) == ADDR_DIFF_VEC)) | |
4172 | return gen_rtx (LABEL_REF, Pmode, next); | |
4173 | } | |
4174 | break; | |
4175 | ||
4176 | case SUBREG: | |
4177 | /* If this is a single word of a multi-word value, see if we previously | |
4178 | assigned a value to that word. */ | |
4179 | if (GET_MODE_SIZE (mode) <= UNITS_PER_WORD | |
4180 | && GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))) > UNITS_PER_WORD | |
4181 | && (new = lookup_as_function (x, CONST_INT)) != 0) | |
4182 | return new; | |
4183 | ||
e5f6a288 RK |
4184 | /* If this is a paradoxical SUBREG, we can't do anything with |
4185 | it because we have no idea what value the extra bits would have. */ | |
4186 | if (GET_MODE_SIZE (mode) > GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))) | |
4187 | return x; | |
4188 | ||
7afe21cc RK |
4189 | /* Fold SUBREG_REG. If it changed, see if we can simplify the SUBREG. |
4190 | We might be able to if the SUBREG is extracting a single word in an | |
4191 | integral mode or extracting the low part. */ | |
4192 | ||
4193 | folded_arg0 = fold_rtx (SUBREG_REG (x), insn); | |
4194 | const_arg0 = equiv_constant (folded_arg0); | |
4195 | if (const_arg0) | |
4196 | folded_arg0 = const_arg0; | |
4197 | ||
4198 | if (folded_arg0 != SUBREG_REG (x)) | |
4199 | { | |
4200 | new = 0; | |
4201 | ||
4202 | if (GET_MODE_CLASS (mode) == MODE_INT | |
4203 | && GET_MODE_SIZE (mode) == UNITS_PER_WORD | |
4204 | && GET_MODE (SUBREG_REG (x)) != VOIDmode) | |
4205 | new = operand_subword (folded_arg0, SUBREG_WORD (x), 0, | |
4206 | GET_MODE (SUBREG_REG (x))); | |
4207 | if (new == 0 && subreg_lowpart_p (x)) | |
4208 | new = gen_lowpart_if_possible (mode, folded_arg0); | |
4209 | if (new) | |
4210 | return new; | |
4211 | } | |
e5f6a288 RK |
4212 | |
4213 | /* If this is a narrowing SUBREG and our operand is a REG, see if | |
4214 | we can find an equivalence for REG that is a arithmetic operation | |
4215 | in a wider mode where both operands are paradoxical SUBREGs | |
4216 | from objects of our result mode. In that case, we couldn't report | |
4217 | an equivalent value for that operation, since we don't know what the | |
4218 | extra bits will be. But we can find an equivalence for this SUBREG | |
4219 | by folding that operation is the narrow mode. This allows us to | |
4220 | fold arithmetic in narrow modes when the machine only supports | |
4221 | word-sized arithmetic. */ | |
4222 | ||
4223 | if (GET_CODE (folded_arg0) == REG | |
4224 | && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (folded_arg0))) | |
4225 | { | |
4226 | struct table_elt *elt; | |
4227 | ||
4228 | /* We can use HASH here since we know that canon_hash won't be | |
4229 | called. */ | |
4230 | elt = lookup (folded_arg0, | |
4231 | HASH (folded_arg0, GET_MODE (folded_arg0)), | |
4232 | GET_MODE (folded_arg0)); | |
4233 | ||
4234 | if (elt) | |
4235 | elt = elt->first_same_value; | |
4236 | ||
4237 | for (; elt; elt = elt->next_same_value) | |
4238 | { | |
4239 | /* Just check for unary and binary operations. */ | |
4240 | if (GET_RTX_CLASS (GET_CODE (elt->exp)) == '1' | |
4241 | && GET_CODE (elt->exp) != SIGN_EXTEND | |
4242 | && GET_CODE (elt->exp) != ZERO_EXTEND | |
4243 | && GET_CODE (XEXP (elt->exp, 0)) == SUBREG | |
4244 | && GET_MODE (SUBREG_REG (XEXP (elt->exp, 0))) == mode) | |
4245 | { | |
4246 | rtx op0 = SUBREG_REG (XEXP (elt->exp, 0)); | |
4247 | ||
4248 | if (GET_CODE (op0) != REG && ! CONSTANT_P (op0)) | |
4249 | op0 = fold_rtx (op0, 0); | |
4250 | ||
4251 | op0 = equiv_constant (op0); | |
4252 | if (op0) | |
4253 | new = simplify_unary_operation (GET_CODE (elt->exp), mode, | |
4254 | op0, mode); | |
4255 | } | |
4256 | else if ((GET_RTX_CLASS (GET_CODE (elt->exp)) == '2' | |
4257 | || GET_RTX_CLASS (GET_CODE (elt->exp)) == 'c') | |
4258 | && ((GET_CODE (XEXP (elt->exp, 0)) == SUBREG | |
4259 | && (GET_MODE (SUBREG_REG (XEXP (elt->exp, 0))) | |
4260 | == mode)) | |
4261 | || CONSTANT_P (XEXP (elt->exp, 0))) | |
4262 | && ((GET_CODE (XEXP (elt->exp, 1)) == SUBREG | |
4263 | && (GET_MODE (SUBREG_REG (XEXP (elt->exp, 1))) | |
4264 | == mode)) | |
4265 | || CONSTANT_P (XEXP (elt->exp, 1)))) | |
4266 | { | |
4267 | rtx op0 = gen_lowpart_common (mode, XEXP (elt->exp, 0)); | |
4268 | rtx op1 = gen_lowpart_common (mode, XEXP (elt->exp, 1)); | |
4269 | ||
4270 | if (op0 && GET_CODE (op0) != REG && ! CONSTANT_P (op0)) | |
4271 | op0 = fold_rtx (op0, 0); | |
4272 | ||
4273 | if (op0) | |
4274 | op0 = equiv_constant (op0); | |
4275 | ||
4276 | if (op1 && GET_CODE (op1) != REG && ! CONSTANT_P (op1)) | |
4277 | op1 = fold_rtx (op1, 0); | |
4278 | ||
4279 | if (op1) | |
4280 | op1 = equiv_constant (op1); | |
4281 | ||
4282 | if (op0 && op1) | |
4283 | new = simplify_binary_operation (GET_CODE (elt->exp), mode, | |
4284 | op0, op1); | |
4285 | } | |
4286 | ||
4287 | if (new) | |
4288 | return new; | |
4289 | } | |
4290 | } | |
4291 | ||
7afe21cc RK |
4292 | return x; |
4293 | ||
4294 | case NOT: | |
4295 | case NEG: | |
4296 | /* If we have (NOT Y), see if Y is known to be (NOT Z). | |
4297 | If so, (NOT Y) simplifies to Z. Similarly for NEG. */ | |
4298 | new = lookup_as_function (XEXP (x, 0), code); | |
4299 | if (new) | |
4300 | return fold_rtx (copy_rtx (XEXP (new, 0)), insn); | |
4301 | break; | |
4302 | ||
4303 | case MEM: | |
4304 | /* If we are not actually processing an insn, don't try to find the | |
4305 | best address. Not only don't we care, but we could modify the | |
4306 | MEM in an invalid way since we have no insn to validate against. */ | |
4307 | if (insn != 0) | |
4308 | find_best_addr (insn, &XEXP (x, 0)); | |
4309 | ||
4310 | { | |
4311 | /* Even if we don't fold in the insn itself, | |
4312 | we can safely do so here, in hopes of getting a constant. */ | |
4313 | rtx addr = fold_rtx (XEXP (x, 0), 0); | |
4314 | rtx base = 0; | |
4315 | int offset = 0; | |
4316 | ||
4317 | if (GET_CODE (addr) == REG | |
4318 | && REGNO_QTY_VALID_P (REGNO (addr)) | |
4319 | && GET_MODE (addr) == qty_mode[reg_qty[REGNO (addr)]] | |
4320 | && qty_const[reg_qty[REGNO (addr)]] != 0) | |
4321 | addr = qty_const[reg_qty[REGNO (addr)]]; | |
4322 | ||
4323 | /* If address is constant, split it into a base and integer offset. */ | |
4324 | if (GET_CODE (addr) == SYMBOL_REF || GET_CODE (addr) == LABEL_REF) | |
4325 | base = addr; | |
4326 | else if (GET_CODE (addr) == CONST && GET_CODE (XEXP (addr, 0)) == PLUS | |
4327 | && GET_CODE (XEXP (XEXP (addr, 0), 1)) == CONST_INT) | |
4328 | { | |
4329 | base = XEXP (XEXP (addr, 0), 0); | |
4330 | offset = INTVAL (XEXP (XEXP (addr, 0), 1)); | |
4331 | } | |
4332 | else if (GET_CODE (addr) == LO_SUM | |
4333 | && GET_CODE (XEXP (addr, 1)) == SYMBOL_REF) | |
4334 | base = XEXP (addr, 1); | |
4335 | ||
4336 | /* If this is a constant pool reference, we can fold it into its | |
4337 | constant to allow better value tracking. */ | |
4338 | if (base && GET_CODE (base) == SYMBOL_REF | |
4339 | && CONSTANT_POOL_ADDRESS_P (base)) | |
4340 | { | |
4341 | rtx constant = get_pool_constant (base); | |
4342 | enum machine_mode const_mode = get_pool_mode (base); | |
4343 | rtx new; | |
4344 | ||
4345 | if (CONSTANT_P (constant) && GET_CODE (constant) != CONST_INT) | |
4346 | constant_pool_entries_cost = COST (constant); | |
4347 | ||
4348 | /* If we are loading the full constant, we have an equivalence. */ | |
4349 | if (offset == 0 && mode == const_mode) | |
4350 | return constant; | |
4351 | ||
4352 | /* If this actually isn't a constant (wierd!), we can't do | |
4353 | anything. Otherwise, handle the two most common cases: | |
4354 | extracting a word from a multi-word constant, and extracting | |
4355 | the low-order bits. Other cases don't seem common enough to | |
4356 | worry about. */ | |
4357 | if (! CONSTANT_P (constant)) | |
4358 | return x; | |
4359 | ||
4360 | if (GET_MODE_CLASS (mode) == MODE_INT | |
4361 | && GET_MODE_SIZE (mode) == UNITS_PER_WORD | |
4362 | && offset % UNITS_PER_WORD == 0 | |
4363 | && (new = operand_subword (constant, | |
4364 | offset / UNITS_PER_WORD, | |
4365 | 0, const_mode)) != 0) | |
4366 | return new; | |
4367 | ||
4368 | if (((BYTES_BIG_ENDIAN | |
4369 | && offset == GET_MODE_SIZE (GET_MODE (constant)) - 1) | |
4370 | || (! BYTES_BIG_ENDIAN && offset == 0)) | |
4371 | && (new = gen_lowpart_if_possible (mode, constant)) != 0) | |
4372 | return new; | |
4373 | } | |
4374 | ||
4375 | /* If this is a reference to a label at a known position in a jump | |
4376 | table, we also know its value. */ | |
4377 | if (base && GET_CODE (base) == LABEL_REF) | |
4378 | { | |
4379 | rtx label = XEXP (base, 0); | |
4380 | rtx table_insn = NEXT_INSN (label); | |
4381 | ||
4382 | if (table_insn && GET_CODE (table_insn) == JUMP_INSN | |
4383 | && GET_CODE (PATTERN (table_insn)) == ADDR_VEC) | |
4384 | { | |
4385 | rtx table = PATTERN (table_insn); | |
4386 | ||
4387 | if (offset >= 0 | |
4388 | && (offset / GET_MODE_SIZE (GET_MODE (table)) | |
4389 | < XVECLEN (table, 0))) | |
4390 | return XVECEXP (table, 0, | |
4391 | offset / GET_MODE_SIZE (GET_MODE (table))); | |
4392 | } | |
4393 | if (table_insn && GET_CODE (table_insn) == JUMP_INSN | |
4394 | && GET_CODE (PATTERN (table_insn)) == ADDR_DIFF_VEC) | |
4395 | { | |
4396 | rtx table = PATTERN (table_insn); | |
4397 | ||
4398 | if (offset >= 0 | |
4399 | && (offset / GET_MODE_SIZE (GET_MODE (table)) | |
4400 | < XVECLEN (table, 1))) | |
4401 | { | |
4402 | offset /= GET_MODE_SIZE (GET_MODE (table)); | |
4403 | new = gen_rtx (MINUS, Pmode, XVECEXP (table, 1, offset), | |
4404 | XEXP (table, 0)); | |
4405 | ||
4406 | if (GET_MODE (table) != Pmode) | |
4407 | new = gen_rtx (TRUNCATE, GET_MODE (table), new); | |
4408 | ||
4409 | return new; | |
4410 | } | |
4411 | } | |
4412 | } | |
4413 | ||
4414 | return x; | |
4415 | } | |
4416 | } | |
4417 | ||
4418 | const_arg0 = 0; | |
4419 | const_arg1 = 0; | |
4420 | const_arg2 = 0; | |
4421 | mode_arg0 = VOIDmode; | |
4422 | ||
4423 | /* Try folding our operands. | |
4424 | Then see which ones have constant values known. */ | |
4425 | ||
4426 | fmt = GET_RTX_FORMAT (code); | |
4427 | for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) | |
4428 | if (fmt[i] == 'e') | |
4429 | { | |
4430 | rtx arg = XEXP (x, i); | |
4431 | rtx folded_arg = arg, const_arg = 0; | |
4432 | enum machine_mode mode_arg = GET_MODE (arg); | |
4433 | rtx cheap_arg, expensive_arg; | |
4434 | rtx replacements[2]; | |
4435 | int j; | |
4436 | ||
4437 | /* Most arguments are cheap, so handle them specially. */ | |
4438 | switch (GET_CODE (arg)) | |
4439 | { | |
4440 | case REG: | |
4441 | /* This is the same as calling equiv_constant; it is duplicated | |
4442 | here for speed. */ | |
4443 | if (REGNO_QTY_VALID_P (REGNO (arg)) | |
4444 | && qty_const[reg_qty[REGNO (arg)]] != 0 | |
4445 | && GET_CODE (qty_const[reg_qty[REGNO (arg)]]) != REG | |
4446 | && GET_CODE (qty_const[reg_qty[REGNO (arg)]]) != PLUS) | |
4447 | const_arg | |
4448 | = gen_lowpart_if_possible (GET_MODE (arg), | |
4449 | qty_const[reg_qty[REGNO (arg)]]); | |
4450 | break; | |
4451 | ||
4452 | case CONST: | |
4453 | case CONST_INT: | |
4454 | case SYMBOL_REF: | |
4455 | case LABEL_REF: | |
4456 | case CONST_DOUBLE: | |
4457 | const_arg = arg; | |
4458 | break; | |
4459 | ||
4460 | #ifdef HAVE_cc0 | |
4461 | case CC0: | |
4462 | folded_arg = prev_insn_cc0; | |
4463 | mode_arg = prev_insn_cc0_mode; | |
4464 | const_arg = equiv_constant (folded_arg); | |
4465 | break; | |
4466 | #endif | |
4467 | ||
4468 | default: | |
4469 | folded_arg = fold_rtx (arg, insn); | |
4470 | const_arg = equiv_constant (folded_arg); | |
4471 | } | |
4472 | ||
4473 | /* For the first three operands, see if the operand | |
4474 | is constant or equivalent to a constant. */ | |
4475 | switch (i) | |
4476 | { | |
4477 | case 0: | |
4478 | folded_arg0 = folded_arg; | |
4479 | const_arg0 = const_arg; | |
4480 | mode_arg0 = mode_arg; | |
4481 | break; | |
4482 | case 1: | |
4483 | folded_arg1 = folded_arg; | |
4484 | const_arg1 = const_arg; | |
4485 | break; | |
4486 | case 2: | |
4487 | const_arg2 = const_arg; | |
4488 | break; | |
4489 | } | |
4490 | ||
4491 | /* Pick the least expensive of the folded argument and an | |
4492 | equivalent constant argument. */ | |
4493 | if (const_arg == 0 || const_arg == folded_arg | |
4494 | || COST (const_arg) > COST (folded_arg)) | |
4495 | cheap_arg = folded_arg, expensive_arg = const_arg; | |
4496 | else | |
4497 | cheap_arg = const_arg, expensive_arg = folded_arg; | |
4498 | ||
4499 | /* Try to replace the operand with the cheapest of the two | |
4500 | possibilities. If it doesn't work and this is either of the first | |
4501 | two operands of a commutative operation, try swapping them. | |
4502 | If THAT fails, try the more expensive, provided it is cheaper | |
4503 | than what is already there. */ | |
4504 | ||
4505 | if (cheap_arg == XEXP (x, i)) | |
4506 | continue; | |
4507 | ||
4508 | if (insn == 0 && ! copied) | |
4509 | { | |
4510 | x = copy_rtx (x); | |
4511 | copied = 1; | |
4512 | } | |
4513 | ||
4514 | replacements[0] = cheap_arg, replacements[1] = expensive_arg; | |
4515 | for (j = 0; | |
4516 | j < 2 && replacements[j] | |
4517 | && COST (replacements[j]) < COST (XEXP (x, i)); | |
4518 | j++) | |
4519 | { | |
4520 | if (validate_change (insn, &XEXP (x, i), replacements[j], 0)) | |
4521 | break; | |
4522 | ||
4523 | if (code == NE || code == EQ || GET_RTX_CLASS (code) == 'c') | |
4524 | { | |
4525 | validate_change (insn, &XEXP (x, i), XEXP (x, 1 - i), 1); | |
4526 | validate_change (insn, &XEXP (x, 1 - i), replacements[j], 1); | |
4527 | ||
4528 | if (apply_change_group ()) | |
4529 | { | |
4530 | /* Swap them back to be invalid so that this loop can | |
4531 | continue and flag them to be swapped back later. */ | |
4532 | rtx tem; | |
4533 | ||
4534 | tem = XEXP (x, 0); XEXP (x, 0) = XEXP (x, 1); | |
4535 | XEXP (x, 1) = tem; | |
4536 | must_swap = 1; | |
4537 | break; | |
4538 | } | |
4539 | } | |
4540 | } | |
4541 | } | |
4542 | ||
4543 | else if (fmt[i] == 'E') | |
4544 | /* Don't try to fold inside of a vector of expressions. | |
4545 | Doing nothing is harmless. */ | |
4546 | ; | |
4547 | ||
4548 | /* If a commutative operation, place a constant integer as the second | |
4549 | operand unless the first operand is also a constant integer. Otherwise, | |
4550 | place any constant second unless the first operand is also a constant. */ | |
4551 | ||
4552 | if (code == EQ || code == NE || GET_RTX_CLASS (code) == 'c') | |
4553 | { | |
4554 | if (must_swap || (const_arg0 | |
4555 | && (const_arg1 == 0 | |
4556 | || (GET_CODE (const_arg0) == CONST_INT | |
4557 | && GET_CODE (const_arg1) != CONST_INT)))) | |
4558 | { | |
4559 | register rtx tem = XEXP (x, 0); | |
4560 | ||
4561 | if (insn == 0 && ! copied) | |
4562 | { | |
4563 | x = copy_rtx (x); | |
4564 | copied = 1; | |
4565 | } | |
4566 | ||
4567 | validate_change (insn, &XEXP (x, 0), XEXP (x, 1), 1); | |
4568 | validate_change (insn, &XEXP (x, 1), tem, 1); | |
4569 | if (apply_change_group ()) | |
4570 | { | |
4571 | tem = const_arg0, const_arg0 = const_arg1, const_arg1 = tem; | |
4572 | tem = folded_arg0, folded_arg0 = folded_arg1, folded_arg1 = tem; | |
4573 | } | |
4574 | } | |
4575 | } | |
4576 | ||
4577 | /* If X is an arithmetic operation, see if we can simplify it. */ | |
4578 | ||
4579 | switch (GET_RTX_CLASS (code)) | |
4580 | { | |
4581 | case '1': | |
4582 | new = simplify_unary_operation (code, mode, | |
4583 | const_arg0 ? const_arg0 : folded_arg0, | |
4584 | mode_arg0); | |
4585 | break; | |
4586 | ||
4587 | case '<': | |
4588 | /* See what items are actually being compared and set FOLDED_ARG[01] | |
4589 | to those values and CODE to the actual comparison code. If any are | |
4590 | constant, set CONST_ARG0 and CONST_ARG1 appropriately. We needn't | |
4591 | do anything if both operands are already known to be constant. */ | |
4592 | ||
4593 | if (const_arg0 == 0 || const_arg1 == 0) | |
4594 | { | |
4595 | struct table_elt *p0, *p1; | |
4596 | ||
4597 | code = find_comparison_args (code, &folded_arg0, &folded_arg1); | |
4598 | const_arg0 = equiv_constant (folded_arg0); | |
4599 | const_arg1 = equiv_constant (folded_arg1); | |
4600 | ||
4601 | /* Get a mode from the values actually being compared, or from the | |
4602 | old value of MODE_ARG0 if both are constants. If the resulting | |
4603 | mode is VOIDmode or a MODE_CC mode, we don't know what kinds | |
4604 | of things are being compared, so we can't do anything with this | |
4605 | comparison. */ | |
4606 | ||
4607 | if (GET_MODE (folded_arg0) != VOIDmode | |
4608 | && GET_MODE_CLASS (GET_MODE (folded_arg0)) != MODE_CC) | |
4609 | mode_arg0 = GET_MODE (folded_arg0); | |
4610 | ||
4611 | else if (GET_MODE (folded_arg1) != VOIDmode | |
4612 | && GET_MODE_CLASS (GET_MODE (folded_arg1)) != MODE_CC) | |
4613 | mode_arg0 = GET_MODE (folded_arg1); | |
4614 | ||
4615 | if (mode_arg0 == VOIDmode || GET_MODE_CLASS (mode_arg0) == MODE_CC) | |
4616 | break; | |
4617 | ||
4618 | /* If we do not now have two constants being compared, see if we | |
4619 | can nevertheless deduce some things about the comparison. */ | |
4620 | if (const_arg0 == 0 || const_arg1 == 0) | |
4621 | { | |
4622 | /* Is FOLDED_ARG0 frame-pointer plus a constant? Or non-explicit | |
4623 | constant? These aren't zero, but we don't know their sign. */ | |
4624 | if (const_arg1 == const0_rtx | |
4625 | && (NONZERO_BASE_PLUS_P (folded_arg0) | |
4626 | #if 0 /* Sad to say, on sysvr4, #pragma weak can make a symbol address | |
4627 | come out as 0. */ | |
4628 | || GET_CODE (folded_arg0) == SYMBOL_REF | |
4629 | #endif | |
4630 | || GET_CODE (folded_arg0) == LABEL_REF | |
4631 | || GET_CODE (folded_arg0) == CONST)) | |
4632 | { | |
4633 | if (code == EQ) | |
4634 | return const0_rtx; | |
4635 | else if (code == NE) | |
4636 | return const_true_rtx; | |
4637 | } | |
4638 | ||
4639 | /* See if the two operands are the same. We don't do this | |
4640 | for IEEE floating-point since we can't assume x == x | |
4641 | since x might be a NaN. */ | |
4642 | ||
4643 | if ((TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT | |
4644 | || GET_MODE_CLASS (mode_arg0) != MODE_FLOAT) | |
4645 | && (folded_arg0 == folded_arg1 | |
4646 | || (GET_CODE (folded_arg0) == REG | |
4647 | && GET_CODE (folded_arg1) == REG | |
4648 | && (reg_qty[REGNO (folded_arg0)] | |
4649 | == reg_qty[REGNO (folded_arg1)])) | |
4650 | || ((p0 = lookup (folded_arg0, | |
4651 | (safe_hash (folded_arg0, mode_arg0) | |
4652 | % NBUCKETS), mode_arg0)) | |
4653 | && (p1 = lookup (folded_arg1, | |
4654 | (safe_hash (folded_arg1, mode_arg0) | |
4655 | % NBUCKETS), mode_arg0)) | |
4656 | && p0->first_same_value == p1->first_same_value))) | |
4657 | return ((code == EQ || code == LE || code == GE | |
4658 | || code == LEU || code == GEU) | |
4659 | ? const_true_rtx : const0_rtx); | |
4660 | ||
4661 | /* If FOLDED_ARG0 is a register, see if the comparison we are | |
4662 | doing now is either the same as we did before or the reverse | |
4663 | (we only check the reverse if not floating-point). */ | |
4664 | else if (GET_CODE (folded_arg0) == REG) | |
4665 | { | |
4666 | int qty = reg_qty[REGNO (folded_arg0)]; | |
4667 | ||
4668 | if (REGNO_QTY_VALID_P (REGNO (folded_arg0)) | |
4669 | && (comparison_dominates_p (qty_comparison_code[qty], code) | |
4670 | || (comparison_dominates_p (qty_comparison_code[qty], | |
4671 | reverse_condition (code)) | |
4672 | && GET_MODE_CLASS (mode_arg0) == MODE_INT)) | |
4673 | && (rtx_equal_p (qty_comparison_const[qty], folded_arg1) | |
4674 | || (const_arg1 | |
4675 | && rtx_equal_p (qty_comparison_const[qty], | |
4676 | const_arg1)) | |
4677 | || (GET_CODE (folded_arg1) == REG | |
4678 | && (reg_qty[REGNO (folded_arg1)] | |
4679 | == qty_comparison_qty[qty])))) | |
4680 | return (comparison_dominates_p (qty_comparison_code[qty], | |
4681 | code) | |
4682 | ? const_true_rtx : const0_rtx); | |
4683 | } | |
4684 | } | |
4685 | } | |
4686 | ||
4687 | /* If we are comparing against zero, see if the first operand is | |
4688 | equivalent to an IOR with a constant. If so, we may be able to | |
4689 | determine the result of this comparison. */ | |
4690 | ||
4691 | if (const_arg1 == const0_rtx) | |
4692 | { | |
4693 | rtx y = lookup_as_function (folded_arg0, IOR); | |
4694 | rtx inner_const; | |
4695 | ||
4696 | if (y != 0 | |
4697 | && (inner_const = equiv_constant (XEXP (y, 1))) != 0 | |
4698 | && GET_CODE (inner_const) == CONST_INT | |
4699 | && INTVAL (inner_const) != 0) | |
4700 | { | |
4701 | int sign_bitnum = GET_MODE_BITSIZE (mode_arg0) - 1; | |
4702 | int has_sign = (HOST_BITS_PER_INT >= sign_bitnum | |
4703 | && (INTVAL (inner_const) & (1 << sign_bitnum))); | |
4704 | ||
4705 | switch (code) | |
4706 | { | |
4707 | case EQ: | |
4708 | return const0_rtx; | |
4709 | case NE: | |
4710 | return const_true_rtx; | |
4711 | case LT: case LE: | |
4712 | if (has_sign) | |
4713 | return const_true_rtx; | |
4714 | break; | |
4715 | case GT: case GE: | |
4716 | if (has_sign) | |
4717 | return const0_rtx; | |
4718 | break; | |
4719 | } | |
4720 | } | |
4721 | } | |
4722 | ||
4723 | new = simplify_relational_operation (code, mode_arg0, | |
4724 | const_arg0 ? const_arg0 : folded_arg0, | |
4725 | const_arg1 ? const_arg1 : folded_arg1); | |
4726 | break; | |
4727 | ||
4728 | case '2': | |
4729 | case 'c': | |
4730 | switch (code) | |
4731 | { | |
4732 | case PLUS: | |
4733 | /* If the second operand is a LABEL_REF, see if the first is a MINUS | |
4734 | with that LABEL_REF as its second operand. If so, the result is | |
4735 | the first operand of that MINUS. This handles switches with an | |
4736 | ADDR_DIFF_VEC table. */ | |
4737 | if (const_arg1 && GET_CODE (const_arg1) == LABEL_REF) | |
4738 | { | |
4739 | rtx y = lookup_as_function (folded_arg0, MINUS); | |
4740 | ||
4741 | if (y != 0 && GET_CODE (XEXP (y, 1)) == LABEL_REF | |
4742 | && XEXP (XEXP (y, 1), 0) == XEXP (const_arg1, 0)) | |
4743 | return XEXP (y, 0); | |
4744 | } | |
4745 | ||
4746 | /* ... fall through ... */ | |
4747 | ||
4748 | case MINUS: | |
4749 | case SMIN: case SMAX: case UMIN: case UMAX: | |
4750 | case IOR: case AND: case XOR: | |
4751 | case MULT: case DIV: case UDIV: | |
4752 | case ASHIFT: case LSHIFTRT: case ASHIFTRT: | |
4753 | /* If we have (<op> <reg> <const_int>) for an associative OP and REG | |
4754 | is known to be of similar form, we may be able to replace the | |
4755 | operation with a combined operation. This may eliminate the | |
4756 | intermediate operation if every use is simplified in this way. | |
4757 | Note that the similar optimization done by combine.c only works | |
4758 | if the intermediate operation's result has only one reference. */ | |
4759 | ||
4760 | if (GET_CODE (folded_arg0) == REG | |
4761 | && const_arg1 && GET_CODE (const_arg1) == CONST_INT) | |
4762 | { | |
4763 | int is_shift | |
4764 | = (code == ASHIFT || code == ASHIFTRT || code == LSHIFTRT); | |
4765 | rtx y = lookup_as_function (folded_arg0, code); | |
4766 | rtx inner_const; | |
4767 | enum rtx_code associate_code; | |
4768 | rtx new_const; | |
4769 | ||
4770 | if (y == 0 | |
4771 | || 0 == (inner_const | |
4772 | = equiv_constant (fold_rtx (XEXP (y, 1), 0))) | |
4773 | || GET_CODE (inner_const) != CONST_INT | |
4774 | /* If we have compiled a statement like | |
4775 | "if (x == (x & mask1))", and now are looking at | |
4776 | "x & mask2", we will have a case where the first operand | |
4777 | of Y is the same as our first operand. Unless we detect | |
4778 | this case, an infinite loop will result. */ | |
4779 | || XEXP (y, 0) == folded_arg0) | |
4780 | break; | |
4781 | ||
4782 | /* Don't associate these operations if they are a PLUS with the | |
4783 | same constant and it is a power of two. These might be doable | |
4784 | with a pre- or post-increment. Similarly for two subtracts of | |
4785 | identical powers of two with post decrement. */ | |
4786 | ||
4787 | if (code == PLUS && INTVAL (const_arg1) == INTVAL (inner_const) | |
4788 | && (0 | |
4789 | #if defined(HAVE_PRE_INCREMENT) || defined(HAVE_POST_INCREMENT) | |
4790 | || exact_log2 (INTVAL (const_arg1)) >= 0 | |
4791 | #endif | |
4792 | #if defined(HAVE_PRE_DECREMENT) || defined(HAVE_POST_DECREMENT) | |
4793 | || exact_log2 (- INTVAL (const_arg1)) >= 0 | |
4794 | #endif | |
4795 | )) | |
4796 | break; | |
4797 | ||
4798 | /* Compute the code used to compose the constants. For example, | |
4799 | A/C1/C2 is A/(C1 * C2), so if CODE == DIV, we want MULT. */ | |
4800 | ||
4801 | associate_code | |
4802 | = (code == MULT || code == DIV || code == UDIV ? MULT | |
4803 | : is_shift || code == PLUS || code == MINUS ? PLUS : code); | |
4804 | ||
4805 | new_const = simplify_binary_operation (associate_code, mode, | |
4806 | const_arg1, inner_const); | |
4807 | ||
4808 | if (new_const == 0) | |
4809 | break; | |
4810 | ||
4811 | /* If we are associating shift operations, don't let this | |
4812 | produce a shift of larger than the object. This could | |
4813 | occur when we following a sign-extend by a right shift on | |
4814 | a machine that does a sign-extend as a pair of shifts. */ | |
4815 | ||
4816 | if (is_shift && GET_CODE (new_const) == CONST_INT | |
4817 | && INTVAL (new_const) > GET_MODE_BITSIZE (mode)) | |
4818 | break; | |
4819 | ||
4820 | y = copy_rtx (XEXP (y, 0)); | |
4821 | ||
4822 | /* If Y contains our first operand (the most common way this | |
4823 | can happen is if Y is a MEM), we would do into an infinite | |
4824 | loop if we tried to fold it. So don't in that case. */ | |
4825 | ||
4826 | if (! reg_mentioned_p (folded_arg0, y)) | |
4827 | y = fold_rtx (y, insn); | |
4828 | ||
4829 | new = simplify_binary_operation (code, mode, y, new_const); | |
4830 | if (new) | |
4831 | return new; | |
4832 | ||
4833 | return gen_rtx (code, mode, y, new_const); | |
4834 | } | |
4835 | } | |
4836 | ||
4837 | new = simplify_binary_operation (code, mode, | |
4838 | const_arg0 ? const_arg0 : folded_arg0, | |
4839 | const_arg1 ? const_arg1 : folded_arg1); | |
4840 | break; | |
4841 | ||
4842 | case 'o': | |
4843 | /* (lo_sum (high X) X) is simply X. */ | |
4844 | if (code == LO_SUM && const_arg0 != 0 | |
4845 | && GET_CODE (const_arg0) == HIGH | |
4846 | && rtx_equal_p (XEXP (const_arg0, 0), const_arg1)) | |
4847 | return const_arg1; | |
4848 | break; | |
4849 | ||
4850 | case '3': | |
4851 | case 'b': | |
4852 | new = simplify_ternary_operation (code, mode, mode_arg0, | |
4853 | const_arg0 ? const_arg0 : folded_arg0, | |
4854 | const_arg1 ? const_arg1 : folded_arg1, | |
4855 | const_arg2 ? const_arg2 : XEXP (x, 2)); | |
4856 | break; | |
4857 | } | |
4858 | ||
4859 | return new ? new : x; | |
4860 | } | |
4861 | \f | |
4862 | /* Return a constant value currently equivalent to X. | |
4863 | Return 0 if we don't know one. */ | |
4864 | ||
4865 | static rtx | |
4866 | equiv_constant (x) | |
4867 | rtx x; | |
4868 | { | |
4869 | if (GET_CODE (x) == REG | |
4870 | && REGNO_QTY_VALID_P (REGNO (x)) | |
4871 | && qty_const[reg_qty[REGNO (x)]]) | |
4872 | x = gen_lowpart_if_possible (GET_MODE (x), qty_const[reg_qty[REGNO (x)]]); | |
4873 | ||
4874 | if (x != 0 && CONSTANT_P (x)) | |
4875 | return x; | |
4876 | ||
fc3ffe83 RK |
4877 | /* If X is a MEM, try to fold it outside the context of any insn to see if |
4878 | it might be equivalent to a constant. That handles the case where it | |
4879 | is a constant-pool reference. Then try to look it up in the hash table | |
4880 | in case it is something whose value we have seen before. */ | |
4881 | ||
4882 | if (GET_CODE (x) == MEM) | |
4883 | { | |
4884 | struct table_elt *elt; | |
4885 | ||
4886 | x = fold_rtx (x, 0); | |
4887 | if (CONSTANT_P (x)) | |
4888 | return x; | |
4889 | ||
4890 | elt = lookup (x, safe_hash (x, GET_MODE (x)) % NBUCKETS, GET_MODE (x)); | |
4891 | if (elt == 0) | |
4892 | return 0; | |
4893 | ||
4894 | for (elt = elt->first_same_value; elt; elt = elt->next_same_value) | |
4895 | if (elt->is_const && CONSTANT_P (elt->exp)) | |
4896 | return elt->exp; | |
4897 | } | |
4898 | ||
7afe21cc RK |
4899 | return 0; |
4900 | } | |
4901 | \f | |
4902 | /* Assuming that X is an rtx (e.g., MEM, REG or SUBREG) for a fixed-point | |
4903 | number, return an rtx (MEM, SUBREG, or CONST_INT) that refers to the | |
4904 | least-significant part of X. | |
4905 | MODE specifies how big a part of X to return. | |
4906 | ||
4907 | If the requested operation cannot be done, 0 is returned. | |
4908 | ||
4909 | This is similar to gen_lowpart in emit-rtl.c. */ | |
4910 | ||
4911 | rtx | |
4912 | gen_lowpart_if_possible (mode, x) | |
4913 | enum machine_mode mode; | |
4914 | register rtx x; | |
4915 | { | |
4916 | rtx result = gen_lowpart_common (mode, x); | |
4917 | ||
4918 | if (result) | |
4919 | return result; | |
4920 | else if (GET_CODE (x) == MEM) | |
4921 | { | |
4922 | /* This is the only other case we handle. */ | |
4923 | register int offset = 0; | |
4924 | rtx new; | |
4925 | ||
4926 | #if WORDS_BIG_ENDIAN | |
4927 | offset = (MAX (GET_MODE_SIZE (GET_MODE (x)), UNITS_PER_WORD) | |
4928 | - MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD)); | |
4929 | #endif | |
4930 | #if BYTES_BIG_ENDIAN | |
4931 | /* Adjust the address so that the address-after-the-data | |
4932 | is unchanged. */ | |
4933 | offset -= (MIN (UNITS_PER_WORD, GET_MODE_SIZE (mode)) | |
4934 | - MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (x)))); | |
4935 | #endif | |
4936 | new = gen_rtx (MEM, mode, plus_constant (XEXP (x, 0), offset)); | |
4937 | if (! memory_address_p (mode, XEXP (new, 0))) | |
4938 | return 0; | |
4939 | MEM_VOLATILE_P (new) = MEM_VOLATILE_P (x); | |
4940 | RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (x); | |
4941 | MEM_IN_STRUCT_P (new) = MEM_IN_STRUCT_P (x); | |
4942 | return new; | |
4943 | } | |
4944 | else | |
4945 | return 0; | |
4946 | } | |
4947 | \f | |
4948 | /* Given INSN, a jump insn, TAKEN indicates if we are following the "taken" | |
4949 | branch. It will be zero if not. | |
4950 | ||
4951 | In certain cases, this can cause us to add an equivalence. For example, | |
4952 | if we are following the taken case of | |
4953 | if (i == 2) | |
4954 | we can add the fact that `i' and '2' are now equivalent. | |
4955 | ||
4956 | In any case, we can record that this comparison was passed. If the same | |
4957 | comparison is seen later, we will know its value. */ | |
4958 | ||
4959 | static void | |
4960 | record_jump_equiv (insn, taken) | |
4961 | rtx insn; | |
4962 | int taken; | |
4963 | { | |
4964 | int cond_known_true; | |
4965 | rtx op0, op1; | |
4966 | enum machine_mode mode; | |
4967 | int reversed_nonequality = 0; | |
4968 | enum rtx_code code; | |
4969 | ||
4970 | /* Ensure this is the right kind of insn. */ | |
4971 | if (! condjump_p (insn) || simplejump_p (insn)) | |
4972 | return; | |
4973 | ||
4974 | /* See if this jump condition is known true or false. */ | |
4975 | if (taken) | |
4976 | cond_known_true = (XEXP (SET_SRC (PATTERN (insn)), 2) == pc_rtx); | |
4977 | else | |
4978 | cond_known_true = (XEXP (SET_SRC (PATTERN (insn)), 1) == pc_rtx); | |
4979 | ||
4980 | /* Get the type of comparison being done and the operands being compared. | |
4981 | If we had to reverse a non-equality condition, record that fact so we | |
4982 | know that it isn't valid for floating-point. */ | |
4983 | code = GET_CODE (XEXP (SET_SRC (PATTERN (insn)), 0)); | |
4984 | op0 = fold_rtx (XEXP (XEXP (SET_SRC (PATTERN (insn)), 0), 0), insn); | |
4985 | op1 = fold_rtx (XEXP (XEXP (SET_SRC (PATTERN (insn)), 0), 1), insn); | |
4986 | ||
4987 | code = find_comparison_args (code, &op0, &op1); | |
4988 | if (! cond_known_true) | |
4989 | { | |
4990 | reversed_nonequality = (code != EQ && code != NE); | |
4991 | code = reverse_condition (code); | |
4992 | } | |
4993 | ||
4994 | /* The mode is the mode of the non-constant. */ | |
4995 | mode = GET_MODE (op0); | |
4996 | if (mode == VOIDmode) mode = GET_MODE (op1); | |
4997 | ||
4998 | record_jump_cond (code, mode, op0, op1, reversed_nonequality); | |
4999 | } | |
5000 | ||
5001 | /* We know that comparison CODE applied to OP0 and OP1 in MODE is true. | |
5002 | REVERSED_NONEQUALITY is nonzero if CODE had to be swapped. | |
5003 | Make any useful entries we can with that information. Called from | |
5004 | above function and called recursively. */ | |
5005 | ||
5006 | static void | |
5007 | record_jump_cond (code, mode, op0, op1, reversed_nonequality) | |
5008 | enum rtx_code code; | |
5009 | enum machine_mode mode; | |
5010 | rtx op0, op1; | |
5011 | int reversed_nonequality; | |
5012 | { | |
5013 | int op0_hash_code, op1_hash_code; | |
5014 | int op0_in_memory, op0_in_struct, op1_in_memory, op1_in_struct; | |
5015 | struct table_elt *op0_elt, *op1_elt; | |
5016 | ||
5017 | /* If OP0 and OP1 are known equal, and either is a paradoxical SUBREG, | |
5018 | we know that they are also equal in the smaller mode (this is also | |
5019 | true for all smaller modes whether or not there is a SUBREG, but | |
5020 | is not worth testing for with no SUBREG. */ | |
5021 | ||
5022 | if (code == EQ && GET_CODE (op0) == SUBREG | |
5023 | && GET_MODE_SIZE (mode) > GET_MODE_SIZE (GET_MODE (SUBREG_REG (op0)))) | |
5024 | { | |
5025 | enum machine_mode inner_mode = GET_MODE (SUBREG_REG (op0)); | |
5026 | rtx tem = gen_lowpart_if_possible (inner_mode, op1); | |
5027 | ||
5028 | record_jump_cond (code, mode, SUBREG_REG (op0), | |
5029 | tem ? tem : gen_rtx (SUBREG, inner_mode, op1, 0), | |
5030 | reversed_nonequality); | |
5031 | } | |
5032 | ||
5033 | if (code == EQ && GET_CODE (op1) == SUBREG | |
5034 | && GET_MODE_SIZE (mode) > GET_MODE_SIZE (GET_MODE (SUBREG_REG (op1)))) | |
5035 | { | |
5036 | enum machine_mode inner_mode = GET_MODE (SUBREG_REG (op1)); | |
5037 | rtx tem = gen_lowpart_if_possible (inner_mode, op0); | |
5038 | ||
5039 | record_jump_cond (code, mode, SUBREG_REG (op1), | |
5040 | tem ? tem : gen_rtx (SUBREG, inner_mode, op0, 0), | |
5041 | reversed_nonequality); | |
5042 | } | |
5043 | ||
5044 | /* Similarly, if this is an NE comparison, and either is a SUBREG | |
5045 | making a smaller mode, we know the whole thing is also NE. */ | |
5046 | ||
5047 | if (code == NE && GET_CODE (op0) == SUBREG | |
5048 | && subreg_lowpart_p (op0) | |
5049 | && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (SUBREG_REG (op0)))) | |
5050 | { | |
5051 | enum machine_mode inner_mode = GET_MODE (SUBREG_REG (op0)); | |
5052 | rtx tem = gen_lowpart_if_possible (inner_mode, op1); | |
5053 | ||
5054 | record_jump_cond (code, mode, SUBREG_REG (op0), | |
5055 | tem ? tem : gen_rtx (SUBREG, inner_mode, op1, 0), | |
5056 | reversed_nonequality); | |
5057 | } | |
5058 | ||
5059 | if (code == NE && GET_CODE (op1) == SUBREG | |
5060 | && subreg_lowpart_p (op1) | |
5061 | && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (SUBREG_REG (op1)))) | |
5062 | { | |
5063 | enum machine_mode inner_mode = GET_MODE (SUBREG_REG (op1)); | |
5064 | rtx tem = gen_lowpart_if_possible (inner_mode, op0); | |
5065 | ||
5066 | record_jump_cond (code, mode, SUBREG_REG (op1), | |
5067 | tem ? tem : gen_rtx (SUBREG, inner_mode, op0, 0), | |
5068 | reversed_nonequality); | |
5069 | } | |
5070 | ||
5071 | /* Hash both operands. */ | |
5072 | ||
5073 | do_not_record = 0; | |
5074 | hash_arg_in_memory = 0; | |
5075 | hash_arg_in_struct = 0; | |
5076 | op0_hash_code = HASH (op0, mode); | |
5077 | op0_in_memory = hash_arg_in_memory; | |
5078 | op0_in_struct = hash_arg_in_struct; | |
5079 | ||
5080 | if (do_not_record) | |
5081 | return; | |
5082 | ||
5083 | do_not_record = 0; | |
5084 | hash_arg_in_memory = 0; | |
5085 | hash_arg_in_struct = 0; | |
5086 | op1_hash_code = HASH (op1, mode); | |
5087 | op1_in_memory = hash_arg_in_memory; | |
5088 | op1_in_struct = hash_arg_in_struct; | |
5089 | ||
5090 | if (do_not_record) | |
5091 | return; | |
5092 | ||
5093 | /* Look up both operands. */ | |
5094 | op0_elt = lookup (op0, op0_hash_code, mode); | |
5095 | op1_elt = lookup (op1, op1_hash_code, mode); | |
5096 | ||
5097 | /* If we aren't setting two things equal all we can do is save this | |
5098 | comparison. */ | |
5099 | if (code != EQ) | |
5100 | { | |
5101 | /* If we reversed a floating-point comparison, if OP0 is not a | |
5102 | register, or if OP1 is neither a register or constant, we can't | |
5103 | do anything. */ | |
5104 | ||
5105 | if (GET_CODE (op1) != REG) | |
5106 | op1 = equiv_constant (op1); | |
5107 | ||
5108 | if ((reversed_nonequality && GET_MODE_CLASS (mode) != MODE_INT) | |
5109 | || GET_CODE (op0) != REG || op1 == 0) | |
5110 | return; | |
5111 | ||
5112 | /* Put OP0 in the hash table if it isn't already. This gives it a | |
5113 | new quantity number. */ | |
5114 | if (op0_elt == 0) | |
5115 | { | |
5116 | if (insert_regs (op0, 0, 0)) | |
5117 | { | |
5118 | rehash_using_reg (op0); | |
5119 | op0_hash_code = HASH (op0, mode); | |
5120 | } | |
5121 | ||
5122 | op0_elt = insert (op0, 0, op0_hash_code, mode); | |
5123 | op0_elt->in_memory = op0_in_memory; | |
5124 | op0_elt->in_struct = op0_in_struct; | |
5125 | } | |
5126 | ||
5127 | qty_comparison_code[reg_qty[REGNO (op0)]] = code; | |
5128 | if (GET_CODE (op1) == REG) | |
5129 | { | |
5130 | /* Put OP1 in the hash table so it gets a new quantity number. */ | |
5131 | if (op1_elt == 0) | |
5132 | { | |
5133 | if (insert_regs (op1, 0, 0)) | |
5134 | { | |
5135 | rehash_using_reg (op1); | |
5136 | op1_hash_code = HASH (op1, mode); | |
5137 | } | |
5138 | ||
5139 | op1_elt = insert (op1, 0, op1_hash_code, mode); | |
5140 | op1_elt->in_memory = op1_in_memory; | |
5141 | op1_elt->in_struct = op1_in_struct; | |
5142 | } | |
5143 | ||
5144 | qty_comparison_qty[reg_qty[REGNO (op0)]] = reg_qty[REGNO (op1)]; | |
5145 | qty_comparison_const[reg_qty[REGNO (op0)]] = 0; | |
5146 | } | |
5147 | else | |
5148 | { | |
5149 | qty_comparison_qty[reg_qty[REGNO (op0)]] = -1; | |
5150 | qty_comparison_const[reg_qty[REGNO (op0)]] = op1; | |
5151 | } | |
5152 | ||
5153 | return; | |
5154 | } | |
5155 | ||
5156 | /* If both are equivalent, merge the two classes. Save this class for | |
5157 | `cse_set_around_loop'. */ | |
5158 | if (op0_elt && op1_elt) | |
5159 | { | |
5160 | merge_equiv_classes (op0_elt, op1_elt); | |
5161 | last_jump_equiv_class = op0_elt; | |
5162 | } | |
5163 | ||
5164 | /* For whichever side doesn't have an equivalence, make one. */ | |
5165 | if (op0_elt == 0) | |
5166 | { | |
5167 | if (insert_regs (op0, op1_elt, 0)) | |
5168 | { | |
5169 | rehash_using_reg (op0); | |
5170 | op0_hash_code = HASH (op0, mode); | |
5171 | } | |
5172 | ||
5173 | op0_elt = insert (op0, op1_elt, op0_hash_code, mode); | |
5174 | op0_elt->in_memory = op0_in_memory; | |
5175 | op0_elt->in_struct = op0_in_struct; | |
5176 | last_jump_equiv_class = op0_elt; | |
5177 | } | |
5178 | ||
5179 | if (op1_elt == 0) | |
5180 | { | |
5181 | if (insert_regs (op1, op0_elt, 0)) | |
5182 | { | |
5183 | rehash_using_reg (op1); | |
5184 | op1_hash_code = HASH (op1, mode); | |
5185 | } | |
5186 | ||
5187 | op1_elt = insert (op1, op0_elt, op1_hash_code, mode); | |
5188 | op1_elt->in_memory = op1_in_memory; | |
5189 | op1_elt->in_struct = op1_in_struct; | |
5190 | last_jump_equiv_class = op1_elt; | |
5191 | } | |
5192 | } | |
5193 | \f | |
5194 | /* CSE processing for one instruction. | |
5195 | First simplify sources and addresses of all assignments | |
5196 | in the instruction, using previously-computed equivalents values. | |
5197 | Then install the new sources and destinations in the table | |
5198 | of available values. | |
5199 | ||
5200 | If IN_LIBCALL_BLOCK is nonzero, don't record any equivalence made in | |
5201 | the insn. */ | |
5202 | ||
5203 | /* Data on one SET contained in the instruction. */ | |
5204 | ||
5205 | struct set | |
5206 | { | |
5207 | /* The SET rtx itself. */ | |
5208 | rtx rtl; | |
5209 | /* The SET_SRC of the rtx (the original value, if it is changing). */ | |
5210 | rtx src; | |
5211 | /* The hash-table element for the SET_SRC of the SET. */ | |
5212 | struct table_elt *src_elt; | |
5213 | /* Hash code for the SET_SRC. */ | |
5214 | int src_hash_code; | |
5215 | /* Hash code for the SET_DEST. */ | |
5216 | int dest_hash_code; | |
5217 | /* The SET_DEST, with SUBREG, etc., stripped. */ | |
5218 | rtx inner_dest; | |
5219 | /* Place where the pointer to the INNER_DEST was found. */ | |
5220 | rtx *inner_dest_loc; | |
5221 | /* Nonzero if the SET_SRC is in memory. */ | |
5222 | char src_in_memory; | |
5223 | /* Nonzero if the SET_SRC is in a structure. */ | |
5224 | char src_in_struct; | |
5225 | /* Nonzero if the SET_SRC contains something | |
5226 | whose value cannot be predicted and understood. */ | |
5227 | char src_volatile; | |
5228 | /* Original machine mode, in case it becomes a CONST_INT. */ | |
5229 | enum machine_mode mode; | |
5230 | /* A constant equivalent for SET_SRC, if any. */ | |
5231 | rtx src_const; | |
5232 | /* Hash code of constant equivalent for SET_SRC. */ | |
5233 | int src_const_hash_code; | |
5234 | /* Table entry for constant equivalent for SET_SRC, if any. */ | |
5235 | struct table_elt *src_const_elt; | |
5236 | }; | |
5237 | ||
5238 | static void | |
5239 | cse_insn (insn, in_libcall_block) | |
5240 | rtx insn; | |
5241 | int in_libcall_block; | |
5242 | { | |
5243 | register rtx x = PATTERN (insn); | |
5244 | rtx tem; | |
5245 | register int i; | |
5246 | register int n_sets = 0; | |
5247 | ||
5248 | /* Records what this insn does to set CC0. */ | |
5249 | rtx this_insn_cc0 = 0; | |
5250 | enum machine_mode this_insn_cc0_mode; | |
5251 | struct write_data writes_memory; | |
5252 | static struct write_data init = {0, 0, 0, 0}; | |
5253 | ||
5254 | rtx src_eqv = 0; | |
5255 | struct table_elt *src_eqv_elt = 0; | |
5256 | int src_eqv_volatile; | |
5257 | int src_eqv_in_memory; | |
5258 | int src_eqv_in_struct; | |
5259 | int src_eqv_hash_code; | |
5260 | ||
5261 | struct set *sets; | |
5262 | ||
5263 | this_insn = insn; | |
5264 | writes_memory = init; | |
5265 | ||
5266 | /* Find all the SETs and CLOBBERs in this instruction. | |
5267 | Record all the SETs in the array `set' and count them. | |
5268 | Also determine whether there is a CLOBBER that invalidates | |
5269 | all memory references, or all references at varying addresses. */ | |
5270 | ||
5271 | if (GET_CODE (x) == SET) | |
5272 | { | |
5273 | sets = (struct set *) alloca (sizeof (struct set)); | |
5274 | sets[0].rtl = x; | |
5275 | ||
5276 | /* Ignore SETs that are unconditional jumps. | |
5277 | They never need cse processing, so this does not hurt. | |
5278 | The reason is not efficiency but rather | |
5279 | so that we can test at the end for instructions | |
5280 | that have been simplified to unconditional jumps | |
5281 | and not be misled by unchanged instructions | |
5282 | that were unconditional jumps to begin with. */ | |
5283 | if (SET_DEST (x) == pc_rtx | |
5284 | && GET_CODE (SET_SRC (x)) == LABEL_REF) | |
5285 | ; | |
5286 | ||
5287 | /* Don't count call-insns, (set (reg 0) (call ...)), as a set. | |
5288 | The hard function value register is used only once, to copy to | |
5289 | someplace else, so it isn't worth cse'ing (and on 80386 is unsafe)! | |
5290 | Ensure we invalidate the destination register. On the 80386 no | |
5291 | other code would invalidate it since it is a fixed_reg. */ | |
5292 | ||
5293 | else if (GET_CODE (SET_SRC (x)) == CALL) | |
5294 | { | |
5295 | canon_reg (SET_SRC (x), insn); | |
5296 | fold_rtx (SET_SRC (x), insn); | |
5297 | invalidate (SET_DEST (x)); | |
5298 | } | |
5299 | else | |
5300 | n_sets = 1; | |
5301 | } | |
5302 | else if (GET_CODE (x) == PARALLEL) | |
5303 | { | |
5304 | register int lim = XVECLEN (x, 0); | |
5305 | ||
5306 | sets = (struct set *) alloca (lim * sizeof (struct set)); | |
5307 | ||
5308 | /* Find all regs explicitly clobbered in this insn, | |
5309 | and ensure they are not replaced with any other regs | |
5310 | elsewhere in this insn. | |
5311 | When a reg that is clobbered is also used for input, | |
5312 | we should presume that that is for a reason, | |
5313 | and we should not substitute some other register | |
5314 | which is not supposed to be clobbered. | |
5315 | Therefore, this loop cannot be merged into the one below | |
830a38ee | 5316 | because a CALL may precede a CLOBBER and refer to the |
7afe21cc RK |
5317 | value clobbered. We must not let a canonicalization do |
5318 | anything in that case. */ | |
5319 | for (i = 0; i < lim; i++) | |
5320 | { | |
5321 | register rtx y = XVECEXP (x, 0, i); | |
830a38ee RS |
5322 | if (GET_CODE (y) == CLOBBER |
5323 | && (GET_CODE (XEXP (y, 0)) == REG | |
5324 | || GET_CODE (XEXP (y, 0)) == SUBREG)) | |
7afe21cc RK |
5325 | invalidate (XEXP (y, 0)); |
5326 | } | |
5327 | ||
5328 | for (i = 0; i < lim; i++) | |
5329 | { | |
5330 | register rtx y = XVECEXP (x, 0, i); | |
5331 | if (GET_CODE (y) == SET) | |
5332 | { | |
5333 | /* As above, we ignore unconditional jumps and call-insns. */ | |
5334 | if (GET_CODE (SET_SRC (y)) == CALL) | |
5335 | { | |
5336 | canon_reg (SET_SRC (y), insn); | |
5337 | fold_rtx (SET_SRC (y), insn); | |
5338 | invalidate (SET_DEST (y)); | |
5339 | } | |
5340 | else if (SET_DEST (y) == pc_rtx | |
5341 | && GET_CODE (SET_SRC (y)) == LABEL_REF) | |
5342 | ; | |
5343 | else | |
5344 | sets[n_sets++].rtl = y; | |
5345 | } | |
5346 | else if (GET_CODE (y) == CLOBBER) | |
5347 | { | |
5348 | /* If we clobber memory, take note of that, | |
5349 | and canon the address. | |
5350 | This does nothing when a register is clobbered | |
5351 | because we have already invalidated the reg. */ | |
5352 | if (GET_CODE (XEXP (y, 0)) == MEM) | |
5353 | { | |
5354 | canon_reg (XEXP (y, 0), 0); | |
5355 | note_mem_written (XEXP (y, 0), &writes_memory); | |
5356 | } | |
5357 | } | |
5358 | else if (GET_CODE (y) == USE | |
5359 | && ! (GET_CODE (XEXP (y, 0)) == REG | |
5360 | && REGNO (XEXP (y, 0)) < FIRST_PSEUDO_REGISTER)) | |
5361 | canon_reg (y, 0); | |
5362 | else if (GET_CODE (y) == CALL) | |
5363 | { | |
5364 | canon_reg (y, insn); | |
5365 | fold_rtx (y, insn); | |
5366 | } | |
5367 | } | |
5368 | } | |
5369 | else if (GET_CODE (x) == CLOBBER) | |
5370 | { | |
5371 | if (GET_CODE (XEXP (x, 0)) == MEM) | |
5372 | { | |
5373 | canon_reg (XEXP (x, 0), 0); | |
5374 | note_mem_written (XEXP (x, 0), &writes_memory); | |
5375 | } | |
5376 | } | |
5377 | ||
5378 | /* Canonicalize a USE of a pseudo register or memory location. */ | |
5379 | else if (GET_CODE (x) == USE | |
5380 | && ! (GET_CODE (XEXP (x, 0)) == REG | |
5381 | && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER)) | |
5382 | canon_reg (XEXP (x, 0), 0); | |
5383 | else if (GET_CODE (x) == CALL) | |
5384 | { | |
5385 | canon_reg (x, insn); | |
5386 | fold_rtx (x, insn); | |
5387 | } | |
5388 | ||
5389 | if (n_sets == 1 && REG_NOTES (insn) != 0) | |
5390 | { | |
5391 | /* Store the equivalent value in SRC_EQV, if different. */ | |
5392 | rtx tem = find_reg_note (insn, REG_EQUAL, 0); | |
5393 | ||
5394 | if (tem && ! rtx_equal_p (XEXP (tem, 0), SET_SRC (sets[0].rtl))) | |
5395 | src_eqv = canon_reg (XEXP (tem, 0), 0); | |
5396 | } | |
5397 | ||
5398 | /* Canonicalize sources and addresses of destinations. | |
5399 | We do this in a separate pass to avoid problems when a MATCH_DUP is | |
5400 | present in the insn pattern. In that case, we want to ensure that | |
5401 | we don't break the duplicate nature of the pattern. So we will replace | |
5402 | both operands at the same time. Otherwise, we would fail to find an | |
5403 | equivalent substitution in the loop calling validate_change below. | |
5404 | (We also speed up that loop when a canonicalization was done since | |
5405 | recog_memoized need not be called for just a canonicalization unless | |
5406 | a pseudo register is being replaced by a hard reg of vice versa.) | |
5407 | ||
5408 | We used to suppress canonicalization of DEST if it appears in SRC, | |
5409 | but we don't do this any more. | |
5410 | ||
5411 | ??? The way this code is written now, if we have a MATCH_DUP between | |
5412 | two operands that are pseudos and we would want to canonicalize them | |
5413 | to a hard register, we won't do that. The only time this would happen | |
5414 | is if the hard reg was a fixed register, and this should be rare. | |
5415 | ||
5416 | ??? This won't work if there is a MATCH_DUP between an input and an | |
5417 | output, but these never worked and must be declared invalid. */ | |
5418 | ||
5419 | for (i = 0; i < n_sets; i++) | |
5420 | { | |
5421 | rtx dest = SET_DEST (sets[i].rtl); | |
5422 | rtx src = SET_SRC (sets[i].rtl); | |
5423 | rtx new = canon_reg (src, insn); | |
5424 | ||
5425 | if (GET_CODE (new) == REG && GET_CODE (src) == REG | |
5426 | && ((REGNO (new) < FIRST_PSEUDO_REGISTER) | |
5427 | != (REGNO (src) < FIRST_PSEUDO_REGISTER))) | |
5428 | validate_change (insn, &SET_SRC (sets[i].rtl), new, 0); | |
5429 | else | |
5430 | SET_SRC (sets[i].rtl) = new; | |
5431 | ||
5432 | if (GET_CODE (dest) == ZERO_EXTRACT || GET_CODE (dest) == SIGN_EXTRACT) | |
5433 | { | |
5434 | validate_change (insn, &XEXP (dest, 1), | |
5435 | canon_reg (XEXP (dest, 1), insn), 0); | |
5436 | validate_change (insn, &XEXP (dest, 2), | |
5437 | canon_reg (XEXP (dest, 2), insn), 0); | |
5438 | } | |
5439 | ||
5440 | while (GET_CODE (dest) == SUBREG || GET_CODE (dest) == STRICT_LOW_PART | |
5441 | || GET_CODE (dest) == ZERO_EXTRACT | |
5442 | || GET_CODE (dest) == SIGN_EXTRACT) | |
5443 | dest = XEXP (dest, 0); | |
5444 | ||
5445 | if (GET_CODE (dest) == MEM) | |
5446 | canon_reg (dest, insn); | |
5447 | } | |
5448 | ||
5449 | /* Set sets[i].src_elt to the class each source belongs to. | |
5450 | Detect assignments from or to volatile things | |
5451 | and set set[i] to zero so they will be ignored | |
5452 | in the rest of this function. | |
5453 | ||
5454 | Nothing in this loop changes the hash table or the register chains. */ | |
5455 | ||
5456 | for (i = 0; i < n_sets; i++) | |
5457 | { | |
5458 | register rtx src, dest; | |
5459 | register rtx src_folded; | |
5460 | register struct table_elt *elt = 0, *p; | |
5461 | enum machine_mode mode; | |
5462 | rtx src_eqv_here; | |
5463 | rtx src_const = 0; | |
5464 | rtx src_related = 0; | |
5465 | struct table_elt *src_const_elt = 0; | |
5466 | int src_cost = 10000, src_eqv_cost = 10000, src_folded_cost = 10000; | |
5467 | int src_related_cost = 10000, src_elt_cost = 10000; | |
5468 | /* Set non-zero if we need to call force_const_mem on with the | |
5469 | contents of src_folded before using it. */ | |
5470 | int src_folded_force_flag = 0; | |
5471 | ||
5472 | dest = SET_DEST (sets[i].rtl); | |
5473 | src = SET_SRC (sets[i].rtl); | |
5474 | ||
5475 | /* If SRC is a constant that has no machine mode, | |
5476 | hash it with the destination's machine mode. | |
5477 | This way we can keep different modes separate. */ | |
5478 | ||
5479 | mode = GET_MODE (src) == VOIDmode ? GET_MODE (dest) : GET_MODE (src); | |
5480 | sets[i].mode = mode; | |
5481 | ||
5482 | if (src_eqv) | |
5483 | { | |
5484 | enum machine_mode eqvmode = mode; | |
5485 | if (GET_CODE (dest) == STRICT_LOW_PART) | |
5486 | eqvmode = GET_MODE (SUBREG_REG (XEXP (dest, 0))); | |
5487 | do_not_record = 0; | |
5488 | hash_arg_in_memory = 0; | |
5489 | hash_arg_in_struct = 0; | |
5490 | src_eqv = fold_rtx (src_eqv, insn); | |
5491 | src_eqv_hash_code = HASH (src_eqv, eqvmode); | |
5492 | ||
5493 | /* Find the equivalence class for the equivalent expression. */ | |
5494 | ||
5495 | if (!do_not_record) | |
5496 | src_eqv_elt = lookup (src_eqv, src_eqv_hash_code, eqvmode); | |
5497 | ||
5498 | src_eqv_volatile = do_not_record; | |
5499 | src_eqv_in_memory = hash_arg_in_memory; | |
5500 | src_eqv_in_struct = hash_arg_in_struct; | |
5501 | } | |
5502 | ||
5503 | /* If this is a STRICT_LOW_PART assignment, src_eqv corresponds to the | |
5504 | value of the INNER register, not the destination. So it is not | |
5505 | a legal substitution for the source. But save it for later. */ | |
5506 | if (GET_CODE (dest) == STRICT_LOW_PART) | |
5507 | src_eqv_here = 0; | |
5508 | else | |
5509 | src_eqv_here = src_eqv; | |
5510 | ||
5511 | /* Simplify and foldable subexpressions in SRC. Then get the fully- | |
5512 | simplified result, which may not necessarily be valid. */ | |
5513 | src_folded = fold_rtx (src, insn); | |
5514 | ||
5515 | /* If storing a constant in a bitfield, pre-truncate the constant | |
5516 | so we will be able to record it later. */ | |
5517 | if (GET_CODE (SET_DEST (sets[i].rtl)) == ZERO_EXTRACT | |
5518 | || GET_CODE (SET_DEST (sets[i].rtl)) == SIGN_EXTRACT) | |
5519 | { | |
5520 | rtx width = XEXP (SET_DEST (sets[i].rtl), 1); | |
5521 | ||
5522 | if (GET_CODE (src) == CONST_INT | |
5523 | && GET_CODE (width) == CONST_INT | |
5524 | && INTVAL (width) < HOST_BITS_PER_INT | |
5525 | && (INTVAL (src) & ((-1) << INTVAL (width)))) | |
5526 | src_folded = gen_rtx (CONST_INT, VOIDmode, | |
5527 | INTVAL (src) & ((1 << INTVAL (width)) - 1)); | |
5528 | } | |
5529 | ||
5530 | /* Compute SRC's hash code, and also notice if it | |
5531 | should not be recorded at all. In that case, | |
5532 | prevent any further processing of this assignment. */ | |
5533 | do_not_record = 0; | |
5534 | hash_arg_in_memory = 0; | |
5535 | hash_arg_in_struct = 0; | |
5536 | ||
5537 | sets[i].src = src; | |
5538 | sets[i].src_hash_code = HASH (src, mode); | |
5539 | sets[i].src_volatile = do_not_record; | |
5540 | sets[i].src_in_memory = hash_arg_in_memory; | |
5541 | sets[i].src_in_struct = hash_arg_in_struct; | |
5542 | ||
5543 | /* If source is a perverse subreg (such as QI treated as an SI), | |
5544 | treat it as volatile. It may do the work of an SI in one context | |
5545 | where the extra bits are not being used, but cannot replace an SI | |
5546 | in general. */ | |
5547 | if (GET_CODE (src) == SUBREG | |
5548 | && (GET_MODE_SIZE (GET_MODE (src)) | |
5549 | > GET_MODE_SIZE (GET_MODE (SUBREG_REG (src))))) | |
5550 | sets[i].src_volatile = 1; | |
5551 | ||
5552 | /* Locate all possible equivalent forms for SRC. Try to replace | |
5553 | SRC in the insn with each cheaper equivalent. | |
5554 | ||
5555 | We have the following types of equivalents: SRC itself, a folded | |
5556 | version, a value given in a REG_EQUAL note, or a value related | |
5557 | to a constant. | |
5558 | ||
5559 | Each of these equivalents may be part of an additional class | |
5560 | of equivalents (if more than one is in the table, they must be in | |
5561 | the same class; we check for this). | |
5562 | ||
5563 | If the source is volatile, we don't do any table lookups. | |
5564 | ||
5565 | We note any constant equivalent for possible later use in a | |
5566 | REG_NOTE. */ | |
5567 | ||
5568 | if (!sets[i].src_volatile) | |
5569 | elt = lookup (src, sets[i].src_hash_code, mode); | |
5570 | ||
5571 | sets[i].src_elt = elt; | |
5572 | ||
5573 | if (elt && src_eqv_here && src_eqv_elt) | |
5574 | { | |
5575 | if (elt->first_same_value != src_eqv_elt->first_same_value) | |
5576 | { | |
5577 | /* The REG_EQUAL is indicating that two formerly distinct | |
5578 | classes are now equivalent. So merge them. */ | |
5579 | merge_equiv_classes (elt, src_eqv_elt); | |
5580 | src_eqv_hash_code = HASH (src_eqv, elt->mode); | |
5581 | src_eqv_elt = lookup (src_eqv, src_eqv_hash_code, elt->mode); | |
5582 | } | |
5583 | ||
5584 | src_eqv_here = 0; | |
5585 | } | |
5586 | ||
5587 | else if (src_eqv_elt) | |
5588 | elt = src_eqv_elt; | |
5589 | ||
5590 | /* Try to find a constant somewhere and record it in `src_const'. | |
5591 | Record its table element, if any, in `src_const_elt'. Look in | |
5592 | any known equivalences first. (If the constant is not in the | |
5593 | table, also set `sets[i].src_const_hash_code'). */ | |
5594 | if (elt) | |
5595 | for (p = elt->first_same_value; p; p = p->next_same_value) | |
5596 | if (p->is_const) | |
5597 | { | |
5598 | src_const = p->exp; | |
5599 | src_const_elt = elt; | |
5600 | break; | |
5601 | } | |
5602 | ||
5603 | if (src_const == 0 | |
5604 | && (CONSTANT_P (src_folded) | |
5605 | /* Consider (minus (label_ref L1) (label_ref L2)) as | |
5606 | "constant" here so we will record it. This allows us | |
5607 | to fold switch statements when an ADDR_DIFF_VEC is used. */ | |
5608 | || (GET_CODE (src_folded) == MINUS | |
5609 | && GET_CODE (XEXP (src_folded, 0)) == LABEL_REF | |
5610 | && GET_CODE (XEXP (src_folded, 1)) == LABEL_REF))) | |
5611 | src_const = src_folded, src_const_elt = elt; | |
5612 | else if (src_const == 0 && src_eqv_here && CONSTANT_P (src_eqv_here)) | |
5613 | src_const = src_eqv_here, src_const_elt = src_eqv_elt; | |
5614 | ||
5615 | /* If we don't know if the constant is in the table, get its | |
5616 | hash code and look it up. */ | |
5617 | if (src_const && src_const_elt == 0) | |
5618 | { | |
5619 | sets[i].src_const_hash_code = HASH (src_const, mode); | |
5620 | src_const_elt = lookup (src_const, sets[i].src_const_hash_code, | |
5621 | mode); | |
5622 | } | |
5623 | ||
5624 | sets[i].src_const = src_const; | |
5625 | sets[i].src_const_elt = src_const_elt; | |
5626 | ||
5627 | /* If the constant and our source are both in the table, mark them as | |
5628 | equivalent. Otherwise, if a constant is in the table but the source | |
5629 | isn't, set ELT to it. */ | |
5630 | if (src_const_elt && elt | |
5631 | && src_const_elt->first_same_value != elt->first_same_value) | |
5632 | merge_equiv_classes (elt, src_const_elt); | |
5633 | else if (src_const_elt && elt == 0) | |
5634 | elt = src_const_elt; | |
5635 | ||
5636 | /* See if there is a register linearly related to a constant | |
5637 | equivalent of SRC. */ | |
5638 | if (src_const | |
5639 | && (GET_CODE (src_const) == CONST | |
5640 | || (src_const_elt && src_const_elt->related_value != 0))) | |
5641 | { | |
5642 | src_related = use_related_value (src_const, src_const_elt); | |
5643 | if (src_related) | |
5644 | { | |
5645 | struct table_elt *src_related_elt | |
5646 | = lookup (src_related, HASH (src_related, mode), mode); | |
5647 | if (src_related_elt && elt) | |
5648 | { | |
5649 | if (elt->first_same_value | |
5650 | != src_related_elt->first_same_value) | |
5651 | /* This can occur when we previously saw a CONST | |
5652 | involving a SYMBOL_REF and then see the SYMBOL_REF | |
5653 | twice. Merge the involved classes. */ | |
5654 | merge_equiv_classes (elt, src_related_elt); | |
5655 | ||
5656 | src_related = 0; | |
5657 | src_related_elt = 0; | |
5658 | } | |
5659 | else if (src_related_elt && elt == 0) | |
5660 | elt = src_related_elt; | |
5661 | } | |
5662 | } | |
5663 | ||
d45cf215 RS |
5664 | /* Another possibility is that we have an AND with a constant in |
5665 | a mode narrower than a word. If so, it might have been generated | |
5666 | as part of an "if" which would narrow the AND. If we already | |
5667 | have done the AND in a wider mode, we can use a SUBREG of that | |
5668 | value. */ | |
5669 | ||
5670 | if (flag_expensive_optimizations && ! src_related | |
5671 | && GET_CODE (src) == AND && GET_CODE (XEXP (src, 1)) == CONST_INT | |
5672 | && GET_MODE_SIZE (mode) < UNITS_PER_WORD) | |
5673 | { | |
5674 | enum machine_mode tmode; | |
5675 | rtx new_and = gen_rtx (AND, VOIDmode, 0, XEXP (src, 1)); | |
5676 | ||
5677 | for (tmode = GET_MODE_WIDER_MODE (mode); | |
5678 | GET_MODE_SIZE (tmode) <= UNITS_PER_WORD; | |
5679 | tmode = GET_MODE_WIDER_MODE (tmode)) | |
5680 | { | |
5681 | rtx inner = gen_lowpart_if_possible (tmode, XEXP (src, 0)); | |
5682 | struct table_elt *larger_elt; | |
5683 | ||
5684 | if (inner) | |
5685 | { | |
5686 | PUT_MODE (new_and, tmode); | |
5687 | XEXP (new_and, 0) = inner; | |
5688 | larger_elt = lookup (new_and, HASH (new_and, tmode), tmode); | |
5689 | if (larger_elt == 0) | |
5690 | continue; | |
5691 | ||
5692 | for (larger_elt = larger_elt->first_same_value; | |
5693 | larger_elt; larger_elt = larger_elt->next_same_value) | |
5694 | if (GET_CODE (larger_elt->exp) == REG) | |
5695 | { | |
5696 | src_related | |
5697 | = gen_lowpart_if_possible (mode, larger_elt->exp); | |
5698 | break; | |
5699 | } | |
5700 | ||
5701 | if (src_related) | |
5702 | break; | |
5703 | } | |
5704 | } | |
5705 | } | |
5706 | ||
7afe21cc RK |
5707 | if (src == src_folded) |
5708 | src_folded = 0; | |
5709 | ||
5710 | /* At this point, ELT, if non-zero, points to a class of expressions | |
5711 | equivalent to the source of this SET and SRC, SRC_EQV, SRC_FOLDED, | |
5712 | and SRC_RELATED, if non-zero, each contain additional equivalent | |
5713 | expressions. Prune these latter expressions by deleting expressions | |
5714 | already in the equivalence class. | |
5715 | ||
5716 | Check for an equivalent identical to the destination. If found, | |
5717 | this is the preferred equivalent since it will likely lead to | |
5718 | elimination of the insn. Indicate this by placing it in | |
5719 | `src_related'. */ | |
5720 | ||
5721 | if (elt) elt = elt->first_same_value; | |
5722 | for (p = elt; p; p = p->next_same_value) | |
5723 | { | |
5724 | enum rtx_code code = GET_CODE (p->exp); | |
5725 | ||
5726 | /* If the expression is not valid, ignore it. Then we do not | |
5727 | have to check for validity below. In most cases, we can use | |
5728 | `rtx_equal_p', since canonicalization has already been done. */ | |
5729 | if (code != REG && ! exp_equiv_p (p->exp, p->exp, 1, 0)) | |
5730 | continue; | |
5731 | ||
5732 | if (src && GET_CODE (src) == code && rtx_equal_p (src, p->exp)) | |
5733 | src = 0; | |
5734 | else if (src_folded && GET_CODE (src_folded) == code | |
5735 | && rtx_equal_p (src_folded, p->exp)) | |
5736 | src_folded = 0; | |
5737 | else if (src_eqv_here && GET_CODE (src_eqv_here) == code | |
5738 | && rtx_equal_p (src_eqv_here, p->exp)) | |
5739 | src_eqv_here = 0; | |
5740 | else if (src_related && GET_CODE (src_related) == code | |
5741 | && rtx_equal_p (src_related, p->exp)) | |
5742 | src_related = 0; | |
5743 | ||
5744 | /* This is the same as the destination of the insns, we want | |
5745 | to prefer it. Copy it to src_related. The code below will | |
5746 | then give it a negative cost. */ | |
5747 | if (GET_CODE (dest) == code && rtx_equal_p (p->exp, dest)) | |
5748 | src_related = dest; | |
5749 | ||
5750 | } | |
5751 | ||
5752 | /* Find the cheapest valid equivalent, trying all the available | |
5753 | possibilities. Prefer items not in the hash table to ones | |
5754 | that are when they are equal cost. Note that we can never | |
5755 | worsen an insn as the current contents will also succeed. | |
5756 | If we find an equivalent identical to the source, use it as best, | |
5757 | since this insn will probably be eliminated in that case. */ | |
5758 | if (src) | |
5759 | { | |
5760 | if (rtx_equal_p (src, dest)) | |
5761 | src_cost = -1; | |
5762 | else | |
5763 | src_cost = COST (src); | |
5764 | } | |
5765 | ||
5766 | if (src_eqv_here) | |
5767 | { | |
5768 | if (rtx_equal_p (src_eqv_here, dest)) | |
5769 | src_eqv_cost = -1; | |
5770 | else | |
5771 | src_eqv_cost = COST (src_eqv_here); | |
5772 | } | |
5773 | ||
5774 | if (src_folded) | |
5775 | { | |
5776 | if (rtx_equal_p (src_folded, dest)) | |
5777 | src_folded_cost = -1; | |
5778 | else | |
5779 | src_folded_cost = COST (src_folded); | |
5780 | } | |
5781 | ||
5782 | if (src_related) | |
5783 | { | |
5784 | if (rtx_equal_p (src_related, dest)) | |
5785 | src_related_cost = -1; | |
5786 | else | |
5787 | src_related_cost = COST (src_related); | |
5788 | } | |
5789 | ||
5790 | /* If this was an indirect jump insn, a known label will really be | |
5791 | cheaper even though it looks more expensive. */ | |
5792 | if (dest == pc_rtx && src_const && GET_CODE (src_const) == LABEL_REF) | |
5793 | src_folded = src_const, src_folded_cost = -1; | |
5794 | ||
5795 | /* Terminate loop when replacement made. This must terminate since | |
5796 | the current contents will be tested and will always be valid. */ | |
5797 | while (1) | |
5798 | { | |
5799 | rtx trial; | |
5800 | ||
5801 | /* Skip invalid entries. */ | |
5802 | while (elt && GET_CODE (elt->exp) != REG | |
5803 | && ! exp_equiv_p (elt->exp, elt->exp, 1, 0)) | |
5804 | elt = elt->next_same_value; | |
5805 | ||
5806 | if (elt) src_elt_cost = elt->cost; | |
5807 | ||
5808 | /* Find cheapest and skip it for the next time. For items | |
5809 | of equal cost, use this order: | |
5810 | src_folded, src, src_eqv, src_related and hash table entry. */ | |
5811 | if (src_folded_cost <= src_cost | |
5812 | && src_folded_cost <= src_eqv_cost | |
5813 | && src_folded_cost <= src_related_cost | |
5814 | && src_folded_cost <= src_elt_cost) | |
5815 | { | |
5816 | trial = src_folded, src_folded_cost = 10000; | |
5817 | if (src_folded_force_flag) | |
5818 | trial = force_const_mem (mode, trial); | |
5819 | } | |
5820 | else if (src_cost <= src_eqv_cost | |
5821 | && src_cost <= src_related_cost | |
5822 | && src_cost <= src_elt_cost) | |
5823 | trial = src, src_cost = 10000; | |
5824 | else if (src_eqv_cost <= src_related_cost | |
5825 | && src_eqv_cost <= src_elt_cost) | |
5826 | trial = src_eqv_here, src_eqv_cost = 10000; | |
5827 | else if (src_related_cost <= src_elt_cost) | |
5828 | trial = src_related, src_related_cost = 10000; | |
5829 | else | |
5830 | { | |
5831 | trial = canon_reg (copy_rtx (elt->exp), 0); | |
5832 | elt = elt->next_same_value; | |
5833 | src_elt_cost = 10000; | |
5834 | } | |
5835 | ||
5836 | /* We don't normally have an insn matching (set (pc) (pc)), so | |
5837 | check for this separately here. We will delete such an | |
5838 | insn below. | |
5839 | ||
5840 | Tablejump insns contain a USE of the table, so simply replacing | |
5841 | the operand with the constant won't match. This is simply an | |
5842 | unconditional branch, however, and is therefore valid. Just | |
5843 | insert the substitution here and we will delete and re-emit | |
5844 | the insn later. */ | |
5845 | ||
5846 | if (n_sets == 1 && dest == pc_rtx | |
5847 | && (trial == pc_rtx | |
5848 | || (GET_CODE (trial) == LABEL_REF | |
5849 | && ! condjump_p (insn)))) | |
5850 | { | |
5851 | /* If TRIAL is a label in front of a jump table, we are | |
5852 | really falling through the switch (this is how casesi | |
5853 | insns work), so we must branch around the table. */ | |
5854 | if (GET_CODE (trial) == CODE_LABEL | |
5855 | && NEXT_INSN (trial) != 0 | |
5856 | && GET_CODE (NEXT_INSN (trial)) == JUMP_INSN | |
5857 | && (GET_CODE (PATTERN (NEXT_INSN (trial))) == ADDR_DIFF_VEC | |
5858 | || GET_CODE (PATTERN (NEXT_INSN (trial))) == ADDR_VEC)) | |
5859 | ||
5860 | trial = gen_rtx (LABEL_REF, Pmode, get_label_after (trial)); | |
5861 | ||
5862 | SET_SRC (sets[i].rtl) = trial; | |
5863 | break; | |
5864 | } | |
5865 | ||
5866 | /* Look for a substitution that makes a valid insn. */ | |
5867 | else if (validate_change (insn, &SET_SRC (sets[i].rtl), trial, 0)) | |
5868 | break; | |
5869 | ||
5870 | /* If we previously found constant pool entries for | |
5871 | constants and this is a constant, try making a | |
5872 | pool entry. Put it in src_folded unless we already have done | |
5873 | this since that is where it likely came from. */ | |
5874 | ||
5875 | else if (constant_pool_entries_cost | |
5876 | && CONSTANT_P (trial) | |
5877 | && (src_folded == 0 || GET_CODE (src_folded) != MEM) | |
5878 | && GET_MODE_CLASS (mode) != MODE_CC) | |
5879 | { | |
5880 | src_folded_force_flag = 1; | |
5881 | src_folded = trial; | |
5882 | src_folded_cost = constant_pool_entries_cost; | |
5883 | } | |
5884 | } | |
5885 | ||
5886 | src = SET_SRC (sets[i].rtl); | |
5887 | ||
5888 | /* In general, it is good to have a SET with SET_SRC == SET_DEST. | |
5889 | However, there is an important exception: If both are registers | |
5890 | that are not the head of their equivalence class, replace SET_SRC | |
5891 | with the head of the class. If we do not do this, we will have | |
5892 | both registers live over a portion of the basic block. This way, | |
5893 | their lifetimes will likely abut instead of overlapping. */ | |
5894 | if (GET_CODE (dest) == REG | |
5895 | && REGNO_QTY_VALID_P (REGNO (dest)) | |
5896 | && qty_mode[reg_qty[REGNO (dest)]] == GET_MODE (dest) | |
5897 | && qty_first_reg[reg_qty[REGNO (dest)]] != REGNO (dest) | |
5898 | && GET_CODE (src) == REG && REGNO (src) == REGNO (dest) | |
5899 | /* Don't do this if the original insn had a hard reg as | |
5900 | SET_SRC. */ | |
5901 | && (GET_CODE (sets[i].src) != REG | |
5902 | || REGNO (sets[i].src) >= FIRST_PSEUDO_REGISTER)) | |
5903 | /* We can't call canon_reg here because it won't do anything if | |
5904 | SRC is a hard register. */ | |
5905 | { | |
5906 | int first = qty_first_reg[reg_qty[REGNO (src)]]; | |
5907 | ||
5908 | src = SET_SRC (sets[i].rtl) | |
5909 | = first >= FIRST_PSEUDO_REGISTER ? regno_reg_rtx[first] | |
5910 | : gen_rtx (REG, GET_MODE (src), first); | |
5911 | ||
5912 | /* If we had a constant that is cheaper than what we are now | |
5913 | setting SRC to, use that constant. We ignored it when we | |
5914 | thought we could make this into a no-op. */ | |
5915 | if (src_const && COST (src_const) < COST (src) | |
5916 | && validate_change (insn, &SET_SRC (sets[i].rtl), src_const, 0)) | |
5917 | src = src_const; | |
5918 | } | |
5919 | ||
5920 | /* If we made a change, recompute SRC values. */ | |
5921 | if (src != sets[i].src) | |
5922 | { | |
5923 | do_not_record = 0; | |
5924 | hash_arg_in_memory = 0; | |
5925 | hash_arg_in_struct = 0; | |
5926 | sets[i].src = src; | |
5927 | sets[i].src_hash_code = HASH (src, mode); | |
5928 | sets[i].src_volatile = do_not_record; | |
5929 | sets[i].src_in_memory = hash_arg_in_memory; | |
5930 | sets[i].src_in_struct = hash_arg_in_struct; | |
5931 | sets[i].src_elt = lookup (src, sets[i].src_hash_code, mode); | |
5932 | } | |
5933 | ||
5934 | /* If this is a single SET, we are setting a register, and we have an | |
5935 | equivalent constant, we want to add a REG_NOTE. We don't want | |
5936 | to write a REG_EQUAL note for a constant pseudo since verifying that | |
d45cf215 | 5937 | that pseudo hasn't been eliminated is a pain. Such a note also |
7afe21cc RK |
5938 | won't help anything. */ |
5939 | if (n_sets == 1 && src_const && GET_CODE (dest) == REG | |
5940 | && GET_CODE (src_const) != REG) | |
5941 | { | |
5942 | rtx tem = find_reg_note (insn, REG_EQUAL, 0); | |
5943 | ||
5944 | /* Record the actual constant value in a REG_EQUAL note, making | |
5945 | a new one if one does not already exist. */ | |
5946 | if (tem) | |
5947 | XEXP (tem, 0) = src_const; | |
5948 | else | |
5949 | REG_NOTES (insn) = gen_rtx (EXPR_LIST, REG_EQUAL, | |
5950 | src_const, REG_NOTES (insn)); | |
5951 | ||
5952 | /* If storing a constant value in a register that | |
5953 | previously held the constant value 0, | |
5954 | record this fact with a REG_WAS_0 note on this insn. | |
5955 | ||
5956 | Note that the *register* is required to have previously held 0, | |
5957 | not just any register in the quantity and we must point to the | |
5958 | insn that set that register to zero. | |
5959 | ||
5960 | Rather than track each register individually, we just see if | |
5961 | the last set for this quantity was for this register. */ | |
5962 | ||
5963 | if (REGNO_QTY_VALID_P (REGNO (dest)) | |
5964 | && qty_const[reg_qty[REGNO (dest)]] == const0_rtx) | |
5965 | { | |
5966 | /* See if we previously had a REG_WAS_0 note. */ | |
5967 | rtx note = find_reg_note (insn, REG_WAS_0, 0); | |
5968 | rtx const_insn = qty_const_insn[reg_qty[REGNO (dest)]]; | |
5969 | ||
5970 | if ((tem = single_set (const_insn)) != 0 | |
5971 | && rtx_equal_p (SET_DEST (tem), dest)) | |
5972 | { | |
5973 | if (note) | |
5974 | XEXP (note, 0) = const_insn; | |
5975 | else | |
5976 | REG_NOTES (insn) = gen_rtx (INSN_LIST, REG_WAS_0, | |
5977 | const_insn, REG_NOTES (insn)); | |
5978 | } | |
5979 | } | |
5980 | } | |
5981 | ||
5982 | /* Now deal with the destination. */ | |
5983 | do_not_record = 0; | |
5984 | sets[i].inner_dest_loc = &SET_DEST (sets[0].rtl); | |
5985 | ||
5986 | /* Look within any SIGN_EXTRACT or ZERO_EXTRACT | |
5987 | to the MEM or REG within it. */ | |
5988 | while (GET_CODE (dest) == SIGN_EXTRACT | |
5989 | || GET_CODE (dest) == ZERO_EXTRACT | |
5990 | || GET_CODE (dest) == SUBREG | |
5991 | || GET_CODE (dest) == STRICT_LOW_PART) | |
5992 | { | |
5993 | sets[i].inner_dest_loc = &XEXP (dest, 0); | |
5994 | dest = XEXP (dest, 0); | |
5995 | } | |
5996 | ||
5997 | sets[i].inner_dest = dest; | |
5998 | ||
5999 | if (GET_CODE (dest) == MEM) | |
6000 | { | |
6001 | dest = fold_rtx (dest, insn); | |
6002 | ||
6003 | /* Decide whether we invalidate everything in memory, | |
6004 | or just things at non-fixed places. | |
6005 | Writing a large aggregate must invalidate everything | |
6006 | because we don't know how long it is. */ | |
6007 | note_mem_written (dest, &writes_memory); | |
6008 | } | |
6009 | ||
6010 | /* Compute the hash code of the destination now, | |
6011 | before the effects of this instruction are recorded, | |
6012 | since the register values used in the address computation | |
6013 | are those before this instruction. */ | |
6014 | sets[i].dest_hash_code = HASH (dest, mode); | |
6015 | ||
6016 | /* Don't enter a bit-field in the hash table | |
6017 | because the value in it after the store | |
6018 | may not equal what was stored, due to truncation. */ | |
6019 | ||
6020 | if (GET_CODE (SET_DEST (sets[i].rtl)) == ZERO_EXTRACT | |
6021 | || GET_CODE (SET_DEST (sets[i].rtl)) == SIGN_EXTRACT) | |
6022 | { | |
6023 | rtx width = XEXP (SET_DEST (sets[i].rtl), 1); | |
6024 | ||
6025 | if (src_const != 0 && GET_CODE (src_const) == CONST_INT | |
6026 | && GET_CODE (width) == CONST_INT | |
6027 | && INTVAL (width) < HOST_BITS_PER_INT | |
6028 | && ! (INTVAL (src_const) & ((-1) << INTVAL (width)))) | |
6029 | /* Exception: if the value is constant, | |
6030 | and it won't be truncated, record it. */ | |
6031 | ; | |
6032 | else | |
6033 | { | |
6034 | /* This is chosen so that the destination will be invalidated | |
6035 | but no new value will be recorded. | |
6036 | We must invalidate because sometimes constant | |
6037 | values can be recorded for bitfields. */ | |
6038 | sets[i].src_elt = 0; | |
6039 | sets[i].src_volatile = 1; | |
6040 | src_eqv = 0; | |
6041 | src_eqv_elt = 0; | |
6042 | } | |
6043 | } | |
6044 | ||
6045 | /* If only one set in a JUMP_INSN and it is now a no-op, we can delete | |
6046 | the insn. */ | |
6047 | else if (n_sets == 1 && dest == pc_rtx && src == pc_rtx) | |
6048 | { | |
6049 | PUT_CODE (insn, NOTE); | |
6050 | NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED; | |
6051 | NOTE_SOURCE_FILE (insn) = 0; | |
6052 | cse_jumps_altered = 1; | |
6053 | /* One less use of the label this insn used to jump to. */ | |
6054 | --LABEL_NUSES (JUMP_LABEL (insn)); | |
6055 | /* No more processing for this set. */ | |
6056 | sets[i].rtl = 0; | |
6057 | } | |
6058 | ||
6059 | /* If this SET is now setting PC to a label, we know it used to | |
6060 | be a conditional or computed branch. So we see if we can follow | |
6061 | it. If it was a computed branch, delete it and re-emit. */ | |
6062 | else if (dest == pc_rtx && GET_CODE (src) == LABEL_REF) | |
6063 | { | |
6064 | rtx p; | |
6065 | ||
6066 | /* If this is not in the format for a simple branch and | |
6067 | we are the only SET in it, re-emit it. */ | |
6068 | if (! simplejump_p (insn) && n_sets == 1) | |
6069 | { | |
6070 | rtx new = emit_jump_insn_before (gen_jump (XEXP (src, 0)), insn); | |
6071 | JUMP_LABEL (new) = XEXP (src, 0); | |
6072 | LABEL_NUSES (XEXP (src, 0))++; | |
6073 | delete_insn (insn); | |
6074 | insn = new; | |
6075 | } | |
6076 | ||
6077 | /* Now that we've converted this jump to an unconditional jump, | |
6078 | there is dead code after it. Delete the dead code until we | |
6079 | reach a BARRIER, the end of the function, or a label. Do | |
6080 | not delete NOTEs except for NOTE_INSN_DELETED since later | |
6081 | phases assume these notes are retained. */ | |
6082 | ||
6083 | p = insn; | |
6084 | ||
6085 | while (NEXT_INSN (p) != 0 | |
6086 | && GET_CODE (NEXT_INSN (p)) != BARRIER | |
6087 | && GET_CODE (NEXT_INSN (p)) != CODE_LABEL) | |
6088 | { | |
6089 | if (GET_CODE (NEXT_INSN (p)) != NOTE | |
6090 | || NOTE_LINE_NUMBER (NEXT_INSN (p)) == NOTE_INSN_DELETED) | |
6091 | delete_insn (NEXT_INSN (p)); | |
6092 | else | |
6093 | p = NEXT_INSN (p); | |
6094 | } | |
6095 | ||
6096 | /* If we don't have a BARRIER immediately after INSN, put one there. | |
6097 | Much code assumes that there are no NOTEs between a JUMP_INSN and | |
6098 | BARRIER. */ | |
6099 | ||
6100 | if (NEXT_INSN (insn) == 0 | |
6101 | || GET_CODE (NEXT_INSN (insn)) != BARRIER) | |
6102 | emit_barrier_after (insn); | |
6103 | ||
6104 | /* We might have two BARRIERs separated by notes. Delete the second | |
6105 | one if so. */ | |
6106 | ||
538b78e7 RS |
6107 | if (p != insn && NEXT_INSN (p) != 0 |
6108 | && GET_CODE (NEXT_INSN (p)) == BARRIER) | |
7afe21cc RK |
6109 | delete_insn (NEXT_INSN (p)); |
6110 | ||
6111 | cse_jumps_altered = 1; | |
6112 | sets[i].rtl = 0; | |
6113 | } | |
6114 | ||
c2a47e48 RK |
6115 | /* If destination is volatile, invalidate it and then do no further |
6116 | processing for this assignment. */ | |
7afe21cc RK |
6117 | |
6118 | else if (do_not_record) | |
c2a47e48 RK |
6119 | { |
6120 | if (GET_CODE (dest) == REG || GET_CODE (dest) == SUBREG | |
6121 | || GET_CODE (dest) == MEM) | |
6122 | invalidate (dest); | |
6123 | sets[i].rtl = 0; | |
6124 | } | |
7afe21cc RK |
6125 | |
6126 | if (sets[i].rtl != 0 && dest != SET_DEST (sets[i].rtl)) | |
6127 | sets[i].dest_hash_code = HASH (SET_DEST (sets[i].rtl), mode); | |
6128 | ||
6129 | #ifdef HAVE_cc0 | |
6130 | /* If setting CC0, record what it was set to, or a constant, if it | |
6131 | is equivalent to a constant. If it is being set to a floating-point | |
6132 | value, make a COMPARE with the appropriate constant of 0. If we | |
6133 | don't do this, later code can interpret this as a test against | |
6134 | const0_rtx, which can cause problems if we try to put it into an | |
6135 | insn as a floating-point operand. */ | |
6136 | if (dest == cc0_rtx) | |
6137 | { | |
6138 | this_insn_cc0 = src_const && mode != VOIDmode ? src_const : src; | |
6139 | this_insn_cc0_mode = mode; | |
6140 | if (GET_MODE_CLASS (mode) == MODE_FLOAT) | |
6141 | this_insn_cc0 = gen_rtx (COMPARE, VOIDmode, this_insn_cc0, | |
6142 | CONST0_RTX (mode)); | |
6143 | } | |
6144 | #endif | |
6145 | } | |
6146 | ||
6147 | /* Now enter all non-volatile source expressions in the hash table | |
6148 | if they are not already present. | |
6149 | Record their equivalence classes in src_elt. | |
6150 | This way we can insert the corresponding destinations into | |
6151 | the same classes even if the actual sources are no longer in them | |
6152 | (having been invalidated). */ | |
6153 | ||
6154 | if (src_eqv && src_eqv_elt == 0 && sets[0].rtl != 0 && ! src_eqv_volatile | |
6155 | && ! rtx_equal_p (src_eqv, SET_DEST (sets[0].rtl))) | |
6156 | { | |
6157 | register struct table_elt *elt; | |
6158 | register struct table_elt *classp = sets[0].src_elt; | |
6159 | rtx dest = SET_DEST (sets[0].rtl); | |
6160 | enum machine_mode eqvmode = GET_MODE (dest); | |
6161 | ||
6162 | if (GET_CODE (dest) == STRICT_LOW_PART) | |
6163 | { | |
6164 | eqvmode = GET_MODE (SUBREG_REG (XEXP (dest, 0))); | |
6165 | classp = 0; | |
6166 | } | |
6167 | if (insert_regs (src_eqv, classp, 0)) | |
6168 | src_eqv_hash_code = HASH (src_eqv, eqvmode); | |
6169 | elt = insert (src_eqv, classp, src_eqv_hash_code, eqvmode); | |
6170 | elt->in_memory = src_eqv_in_memory; | |
6171 | elt->in_struct = src_eqv_in_struct; | |
6172 | src_eqv_elt = elt; | |
6173 | } | |
6174 | ||
6175 | for (i = 0; i < n_sets; i++) | |
6176 | if (sets[i].rtl && ! sets[i].src_volatile | |
6177 | && ! rtx_equal_p (SET_SRC (sets[i].rtl), SET_DEST (sets[i].rtl))) | |
6178 | { | |
6179 | if (GET_CODE (SET_DEST (sets[i].rtl)) == STRICT_LOW_PART) | |
6180 | { | |
6181 | /* REG_EQUAL in setting a STRICT_LOW_PART | |
6182 | gives an equivalent for the entire destination register, | |
6183 | not just for the subreg being stored in now. | |
6184 | This is a more interesting equivalence, so we arrange later | |
6185 | to treat the entire reg as the destination. */ | |
6186 | sets[i].src_elt = src_eqv_elt; | |
6187 | sets[i].src_hash_code = src_eqv_hash_code; | |
6188 | } | |
6189 | else | |
6190 | { | |
6191 | /* Insert source and constant equivalent into hash table, if not | |
6192 | already present. */ | |
6193 | register struct table_elt *classp = src_eqv_elt; | |
6194 | register rtx src = sets[i].src; | |
6195 | register rtx dest = SET_DEST (sets[i].rtl); | |
6196 | enum machine_mode mode | |
6197 | = GET_MODE (src) == VOIDmode ? GET_MODE (dest) : GET_MODE (src); | |
6198 | ||
6199 | if (sets[i].src_elt == 0) | |
6200 | { | |
6201 | register struct table_elt *elt; | |
6202 | ||
6203 | /* Note that these insert_regs calls cannot remove | |
6204 | any of the src_elt's, because they would have failed to | |
6205 | match if not still valid. */ | |
6206 | if (insert_regs (src, classp, 0)) | |
6207 | sets[i].src_hash_code = HASH (src, mode); | |
6208 | elt = insert (src, classp, sets[i].src_hash_code, mode); | |
6209 | elt->in_memory = sets[i].src_in_memory; | |
6210 | elt->in_struct = sets[i].src_in_struct; | |
6211 | sets[i].src_elt = classp = elt; | |
6212 | } | |
6213 | ||
6214 | if (sets[i].src_const && sets[i].src_const_elt == 0 | |
6215 | && src != sets[i].src_const | |
6216 | && ! rtx_equal_p (sets[i].src_const, src)) | |
6217 | sets[i].src_elt = insert (sets[i].src_const, classp, | |
6218 | sets[i].src_const_hash_code, mode); | |
6219 | } | |
6220 | } | |
6221 | else if (sets[i].src_elt == 0) | |
6222 | /* If we did not insert the source into the hash table (e.g., it was | |
6223 | volatile), note the equivalence class for the REG_EQUAL value, if any, | |
6224 | so that the destination goes into that class. */ | |
6225 | sets[i].src_elt = src_eqv_elt; | |
6226 | ||
6227 | invalidate_from_clobbers (&writes_memory, x); | |
6228 | /* Memory, and some registers, are invalidate by subroutine calls. */ | |
6229 | if (GET_CODE (insn) == CALL_INSN) | |
6230 | { | |
6231 | static struct write_data everything = {0, 1, 1, 1}; | |
6232 | invalidate_memory (&everything); | |
6233 | invalidate_for_call (); | |
6234 | } | |
6235 | ||
6236 | /* Now invalidate everything set by this instruction. | |
6237 | If a SUBREG or other funny destination is being set, | |
6238 | sets[i].rtl is still nonzero, so here we invalidate the reg | |
6239 | a part of which is being set. */ | |
6240 | ||
6241 | for (i = 0; i < n_sets; i++) | |
6242 | if (sets[i].rtl) | |
6243 | { | |
6244 | register rtx dest = sets[i].inner_dest; | |
6245 | ||
6246 | /* Needed for registers to remove the register from its | |
6247 | previous quantity's chain. | |
6248 | Needed for memory if this is a nonvarying address, unless | |
6249 | we have just done an invalidate_memory that covers even those. */ | |
6250 | if (GET_CODE (dest) == REG || GET_CODE (dest) == SUBREG | |
6251 | || (! writes_memory.all && ! cse_rtx_addr_varies_p (dest))) | |
6252 | invalidate (dest); | |
6253 | } | |
6254 | ||
6255 | /* Make sure registers mentioned in destinations | |
6256 | are safe for use in an expression to be inserted. | |
6257 | This removes from the hash table | |
6258 | any invalid entry that refers to one of these registers. | |
6259 | ||
6260 | We don't care about the return value from mention_regs because | |
6261 | we are going to hash the SET_DEST values unconditionally. */ | |
6262 | ||
6263 | for (i = 0; i < n_sets; i++) | |
6264 | if (sets[i].rtl && GET_CODE (SET_DEST (sets[i].rtl)) != REG) | |
6265 | mention_regs (SET_DEST (sets[i].rtl)); | |
6266 | ||
6267 | /* We may have just removed some of the src_elt's from the hash table. | |
6268 | So replace each one with the current head of the same class. */ | |
6269 | ||
6270 | for (i = 0; i < n_sets; i++) | |
6271 | if (sets[i].rtl) | |
6272 | { | |
6273 | if (sets[i].src_elt && sets[i].src_elt->first_same_value == 0) | |
6274 | /* If elt was removed, find current head of same class, | |
6275 | or 0 if nothing remains of that class. */ | |
6276 | { | |
6277 | register struct table_elt *elt = sets[i].src_elt; | |
6278 | ||
6279 | while (elt && elt->prev_same_value) | |
6280 | elt = elt->prev_same_value; | |
6281 | ||
6282 | while (elt && elt->first_same_value == 0) | |
6283 | elt = elt->next_same_value; | |
6284 | sets[i].src_elt = elt ? elt->first_same_value : 0; | |
6285 | } | |
6286 | } | |
6287 | ||
6288 | /* Now insert the destinations into their equivalence classes. */ | |
6289 | ||
6290 | for (i = 0; i < n_sets; i++) | |
6291 | if (sets[i].rtl) | |
6292 | { | |
6293 | register rtx dest = SET_DEST (sets[i].rtl); | |
6294 | register struct table_elt *elt; | |
6295 | ||
6296 | /* Don't record value if we are not supposed to risk allocating | |
6297 | floating-point values in registers that might be wider than | |
6298 | memory. */ | |
6299 | if ((flag_float_store | |
6300 | && GET_CODE (dest) == MEM | |
6301 | && GET_MODE_CLASS (GET_MODE (dest)) == MODE_FLOAT) | |
6302 | /* Don't record values of destinations set inside a libcall block | |
6303 | since we might delete the libcall. Things should have been set | |
6304 | up so we won't want to reuse such a value, but we play it safe | |
6305 | here. */ | |
6306 | || in_libcall_block | |
6307 | /* If we didn't put a REG_EQUAL value or a source into the hash | |
6308 | table, there is no point is recording DEST. */ | |
6309 | || sets[i].src_elt == 0) | |
6310 | continue; | |
6311 | ||
6312 | /* STRICT_LOW_PART isn't part of the value BEING set, | |
6313 | and neither is the SUBREG inside it. | |
6314 | Note that in this case SETS[I].SRC_ELT is really SRC_EQV_ELT. */ | |
6315 | if (GET_CODE (dest) == STRICT_LOW_PART) | |
6316 | dest = SUBREG_REG (XEXP (dest, 0)); | |
6317 | ||
6318 | if (GET_CODE (dest) == REG) | |
6319 | /* Registers must also be inserted into chains for quantities. */ | |
6320 | if (insert_regs (dest, sets[i].src_elt, 1)) | |
6321 | /* If `insert_regs' changes something, the hash code must be | |
6322 | recalculated. */ | |
6323 | sets[i].dest_hash_code = HASH (dest, GET_MODE (dest)); | |
6324 | ||
6325 | elt = insert (dest, sets[i].src_elt, | |
6326 | sets[i].dest_hash_code, GET_MODE (dest)); | |
6327 | elt->in_memory = GET_CODE (sets[i].inner_dest) == MEM; | |
6328 | if (elt->in_memory) | |
6329 | { | |
6330 | /* This implicitly assumes a whole struct | |
6331 | need not have MEM_IN_STRUCT_P. | |
6332 | But a whole struct is *supposed* to have MEM_IN_STRUCT_P. */ | |
6333 | elt->in_struct = (MEM_IN_STRUCT_P (sets[i].inner_dest) | |
6334 | || sets[i].inner_dest != SET_DEST (sets[i].rtl)); | |
6335 | } | |
6336 | ||
fc3ffe83 RK |
6337 | /* If we have (set (subreg:m1 (reg:m2 foo) 0) (bar:m1)), M1 is no |
6338 | narrower than M2, and both M1 and M2 are the same number of words, | |
6339 | we are also doing (set (reg:m2 foo) (subreg:m2 (bar:m1) 0)) so | |
6340 | make that equivalence as well. | |
7afe21cc RK |
6341 | |
6342 | However, BAR may have equivalences for which gen_lowpart_if_possible | |
6343 | will produce a simpler value than gen_lowpart_if_possible applied to | |
6344 | BAR (e.g., if BAR was ZERO_EXTENDed from M2), so we will scan all | |
6345 | BAR's equivalences. If we don't get a simplified form, make | |
6346 | the SUBREG. It will not be used in an equivalence, but will | |
6347 | cause two similar assignments to be detected. | |
6348 | ||
6349 | Note the loop below will find SUBREG_REG (DEST) since we have | |
6350 | already entered SRC and DEST of the SET in the table. */ | |
6351 | ||
6352 | if (GET_CODE (dest) == SUBREG | |
fc3ffe83 RK |
6353 | && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (dest))) / UNITS_PER_WORD |
6354 | == GET_MODE_SIZE (GET_MODE (dest)) / UNITS_PER_WORD) | |
7afe21cc RK |
6355 | && (GET_MODE_SIZE (GET_MODE (dest)) |
6356 | >= GET_MODE_SIZE (GET_MODE (SUBREG_REG (dest)))) | |
6357 | && sets[i].src_elt != 0) | |
6358 | { | |
6359 | enum machine_mode new_mode = GET_MODE (SUBREG_REG (dest)); | |
6360 | struct table_elt *elt, *classp = 0; | |
6361 | ||
6362 | for (elt = sets[i].src_elt->first_same_value; elt; | |
6363 | elt = elt->next_same_value) | |
6364 | { | |
6365 | rtx new_src = 0; | |
6366 | int src_hash; | |
6367 | struct table_elt *src_elt; | |
6368 | ||
6369 | /* Ignore invalid entries. */ | |
6370 | if (GET_CODE (elt->exp) != REG | |
6371 | && ! exp_equiv_p (elt->exp, elt->exp, 1, 0)) | |
6372 | continue; | |
6373 | ||
6374 | new_src = gen_lowpart_if_possible (new_mode, elt->exp); | |
6375 | if (new_src == 0) | |
6376 | new_src = gen_rtx (SUBREG, new_mode, elt->exp, 0); | |
6377 | ||
6378 | src_hash = HASH (new_src, new_mode); | |
6379 | src_elt = lookup (new_src, src_hash, new_mode); | |
6380 | ||
6381 | /* Put the new source in the hash table is if isn't | |
6382 | already. */ | |
6383 | if (src_elt == 0) | |
6384 | { | |
6385 | if (insert_regs (new_src, classp, 0)) | |
6386 | src_hash = HASH (new_src, new_mode); | |
6387 | src_elt = insert (new_src, classp, src_hash, new_mode); | |
6388 | src_elt->in_memory = elt->in_memory; | |
6389 | src_elt->in_struct = elt->in_struct; | |
6390 | } | |
6391 | else if (classp && classp != src_elt->first_same_value) | |
6392 | /* Show that two things that we've seen before are | |
6393 | actually the same. */ | |
6394 | merge_equiv_classes (src_elt, classp); | |
6395 | ||
6396 | classp = src_elt->first_same_value; | |
6397 | } | |
6398 | } | |
6399 | } | |
6400 | ||
6401 | /* Special handling for (set REG0 REG1) | |
6402 | where REG0 is the "cheapest", cheaper than REG1. | |
6403 | After cse, REG1 will probably not be used in the sequel, | |
6404 | so (if easily done) change this insn to (set REG1 REG0) and | |
6405 | replace REG1 with REG0 in the previous insn that computed their value. | |
6406 | Then REG1 will become a dead store and won't cloud the situation | |
6407 | for later optimizations. | |
6408 | ||
6409 | Do not make this change if REG1 is a hard register, because it will | |
6410 | then be used in the sequel and we may be changing a two-operand insn | |
6411 | into a three-operand insn. | |
6412 | ||
6413 | Also do not do this if we are operating on a copy of INSN. */ | |
6414 | ||
6415 | if (n_sets == 1 && sets[0].rtl && GET_CODE (SET_DEST (sets[0].rtl)) == REG | |
6416 | && NEXT_INSN (PREV_INSN (insn)) == insn | |
6417 | && GET_CODE (SET_SRC (sets[0].rtl)) == REG | |
6418 | && REGNO (SET_SRC (sets[0].rtl)) >= FIRST_PSEUDO_REGISTER | |
6419 | && REGNO_QTY_VALID_P (REGNO (SET_SRC (sets[0].rtl))) | |
6420 | && (qty_first_reg[reg_qty[REGNO (SET_SRC (sets[0].rtl))]] | |
6421 | == REGNO (SET_DEST (sets[0].rtl)))) | |
6422 | { | |
6423 | rtx prev = PREV_INSN (insn); | |
6424 | while (prev && GET_CODE (prev) == NOTE) | |
6425 | prev = PREV_INSN (prev); | |
6426 | ||
6427 | if (prev && GET_CODE (prev) == INSN && GET_CODE (PATTERN (prev)) == SET | |
6428 | && SET_DEST (PATTERN (prev)) == SET_SRC (sets[0].rtl)) | |
6429 | { | |
6430 | rtx dest = SET_DEST (sets[0].rtl); | |
6431 | rtx note = find_reg_note (prev, REG_EQUIV, 0); | |
6432 | ||
6433 | validate_change (prev, & SET_DEST (PATTERN (prev)), dest, 1); | |
6434 | validate_change (insn, & SET_DEST (sets[0].rtl), | |
6435 | SET_SRC (sets[0].rtl), 1); | |
6436 | validate_change (insn, & SET_SRC (sets[0].rtl), dest, 1); | |
6437 | apply_change_group (); | |
6438 | ||
6439 | /* If REG1 was equivalent to a constant, REG0 is not. */ | |
6440 | if (note) | |
6441 | PUT_REG_NOTE_KIND (note, REG_EQUAL); | |
6442 | ||
6443 | /* If there was a REG_WAS_0 note on PREV, remove it. Move | |
6444 | any REG_WAS_0 note on INSN to PREV. */ | |
6445 | note = find_reg_note (prev, REG_WAS_0, 0); | |
6446 | if (note) | |
6447 | remove_note (prev, note); | |
6448 | ||
6449 | note = find_reg_note (insn, REG_WAS_0, 0); | |
6450 | if (note) | |
6451 | { | |
6452 | remove_note (insn, note); | |
6453 | XEXP (note, 1) = REG_NOTES (prev); | |
6454 | REG_NOTES (prev) = note; | |
6455 | } | |
6456 | } | |
6457 | } | |
6458 | ||
6459 | /* If this is a conditional jump insn, record any known equivalences due to | |
6460 | the condition being tested. */ | |
6461 | ||
6462 | last_jump_equiv_class = 0; | |
6463 | if (GET_CODE (insn) == JUMP_INSN | |
6464 | && n_sets == 1 && GET_CODE (x) == SET | |
6465 | && GET_CODE (SET_SRC (x)) == IF_THEN_ELSE) | |
6466 | record_jump_equiv (insn, 0); | |
6467 | ||
6468 | #ifdef HAVE_cc0 | |
6469 | /* If the previous insn set CC0 and this insn no longer references CC0, | |
6470 | delete the previous insn. Here we use the fact that nothing expects CC0 | |
6471 | to be valid over an insn, which is true until the final pass. */ | |
6472 | if (prev_insn && GET_CODE (prev_insn) == INSN | |
6473 | && (tem = single_set (prev_insn)) != 0 | |
6474 | && SET_DEST (tem) == cc0_rtx | |
6475 | && ! reg_mentioned_p (cc0_rtx, x)) | |
6476 | { | |
6477 | PUT_CODE (prev_insn, NOTE); | |
6478 | NOTE_LINE_NUMBER (prev_insn) = NOTE_INSN_DELETED; | |
6479 | NOTE_SOURCE_FILE (prev_insn) = 0; | |
6480 | } | |
6481 | ||
6482 | prev_insn_cc0 = this_insn_cc0; | |
6483 | prev_insn_cc0_mode = this_insn_cc0_mode; | |
6484 | #endif | |
6485 | ||
6486 | prev_insn = insn; | |
6487 | } | |
6488 | \f | |
6489 | /* Store 1 in *WRITES_PTR for those categories of memory ref | |
6490 | that must be invalidated when the expression WRITTEN is stored in. | |
6491 | If WRITTEN is null, say everything must be invalidated. */ | |
6492 | ||
6493 | static void | |
6494 | note_mem_written (written, writes_ptr) | |
6495 | rtx written; | |
6496 | struct write_data *writes_ptr; | |
6497 | { | |
6498 | static struct write_data everything = {0, 1, 1, 1}; | |
6499 | ||
6500 | if (written == 0) | |
6501 | *writes_ptr = everything; | |
6502 | else if (GET_CODE (written) == MEM) | |
6503 | { | |
6504 | /* Pushing or popping the stack invalidates just the stack pointer. */ | |
6505 | rtx addr = XEXP (written, 0); | |
6506 | if ((GET_CODE (addr) == PRE_DEC || GET_CODE (addr) == PRE_INC | |
6507 | || GET_CODE (addr) == POST_DEC || GET_CODE (addr) == POST_INC) | |
6508 | && GET_CODE (XEXP (addr, 0)) == REG | |
6509 | && REGNO (XEXP (addr, 0)) == STACK_POINTER_REGNUM) | |
6510 | { | |
6511 | writes_ptr->sp = 1; | |
6512 | return; | |
6513 | } | |
6514 | else if (GET_MODE (written) == BLKmode) | |
6515 | *writes_ptr = everything; | |
6516 | else if (cse_rtx_addr_varies_p (written)) | |
6517 | { | |
6518 | /* A varying address that is a sum indicates an array element, | |
6519 | and that's just as good as a structure element | |
6520 | in implying that we need not invalidate scalar variables. */ | |
6521 | if (!(MEM_IN_STRUCT_P (written) | |
6522 | || GET_CODE (XEXP (written, 0)) == PLUS)) | |
6523 | writes_ptr->all = 1; | |
6524 | writes_ptr->nonscalar = 1; | |
6525 | } | |
6526 | writes_ptr->var = 1; | |
6527 | } | |
6528 | } | |
6529 | ||
6530 | /* Perform invalidation on the basis of everything about an insn | |
6531 | except for invalidating the actual places that are SET in it. | |
6532 | This includes the places CLOBBERed, and anything that might | |
6533 | alias with something that is SET or CLOBBERed. | |
6534 | ||
6535 | W points to the writes_memory for this insn, a struct write_data | |
6536 | saying which kinds of memory references must be invalidated. | |
6537 | X is the pattern of the insn. */ | |
6538 | ||
6539 | static void | |
6540 | invalidate_from_clobbers (w, x) | |
6541 | struct write_data *w; | |
6542 | rtx x; | |
6543 | { | |
6544 | /* If W->var is not set, W specifies no action. | |
6545 | If W->all is set, this step gets all memory refs | |
6546 | so they can be ignored in the rest of this function. */ | |
6547 | if (w->var) | |
6548 | invalidate_memory (w); | |
6549 | ||
6550 | if (w->sp) | |
6551 | { | |
6552 | if (reg_tick[STACK_POINTER_REGNUM] >= 0) | |
6553 | reg_tick[STACK_POINTER_REGNUM]++; | |
6554 | ||
6555 | /* This should be *very* rare. */ | |
6556 | if (TEST_HARD_REG_BIT (hard_regs_in_table, STACK_POINTER_REGNUM)) | |
6557 | invalidate (stack_pointer_rtx); | |
6558 | } | |
6559 | ||
6560 | if (GET_CODE (x) == CLOBBER) | |
6561 | { | |
6562 | rtx ref = XEXP (x, 0); | |
6563 | if (ref | |
6564 | && (GET_CODE (ref) == REG || GET_CODE (ref) == SUBREG | |
6565 | || (GET_CODE (ref) == MEM && ! w->all))) | |
6566 | invalidate (ref); | |
6567 | } | |
6568 | else if (GET_CODE (x) == PARALLEL) | |
6569 | { | |
6570 | register int i; | |
6571 | for (i = XVECLEN (x, 0) - 1; i >= 0; i--) | |
6572 | { | |
6573 | register rtx y = XVECEXP (x, 0, i); | |
6574 | if (GET_CODE (y) == CLOBBER) | |
6575 | { | |
6576 | rtx ref = XEXP (y, 0); | |
6577 | if (ref | |
6578 | &&(GET_CODE (ref) == REG || GET_CODE (ref) == SUBREG | |
6579 | || (GET_CODE (ref) == MEM && !w->all))) | |
6580 | invalidate (ref); | |
6581 | } | |
6582 | } | |
6583 | } | |
6584 | } | |
6585 | \f | |
6586 | /* Process X, part of the REG_NOTES of an insn. Look at any REG_EQUAL notes | |
6587 | and replace any registers in them with either an equivalent constant | |
6588 | or the canonical form of the register. If we are inside an address, | |
6589 | only do this if the address remains valid. | |
6590 | ||
6591 | OBJECT is 0 except when within a MEM in which case it is the MEM. | |
6592 | ||
6593 | Return the replacement for X. */ | |
6594 | ||
6595 | static rtx | |
6596 | cse_process_notes (x, object) | |
6597 | rtx x; | |
6598 | rtx object; | |
6599 | { | |
6600 | enum rtx_code code = GET_CODE (x); | |
6601 | char *fmt = GET_RTX_FORMAT (code); | |
6602 | int qty; | |
6603 | int i; | |
6604 | ||
6605 | switch (code) | |
6606 | { | |
6607 | case CONST_INT: | |
6608 | case CONST: | |
6609 | case SYMBOL_REF: | |
6610 | case LABEL_REF: | |
6611 | case CONST_DOUBLE: | |
6612 | case PC: | |
6613 | case CC0: | |
6614 | case LO_SUM: | |
6615 | return x; | |
6616 | ||
6617 | case MEM: | |
6618 | XEXP (x, 0) = cse_process_notes (XEXP (x, 0), x); | |
6619 | return x; | |
6620 | ||
6621 | case EXPR_LIST: | |
6622 | case INSN_LIST: | |
6623 | if (REG_NOTE_KIND (x) == REG_EQUAL) | |
6624 | XEXP (x, 0) = cse_process_notes (XEXP (x, 0), 0); | |
6625 | if (XEXP (x, 1)) | |
6626 | XEXP (x, 1) = cse_process_notes (XEXP (x, 1), 0); | |
6627 | return x; | |
6628 | ||
6629 | case REG: | |
6630 | i = reg_qty[REGNO (x)]; | |
6631 | ||
6632 | /* Return a constant or a constant register. */ | |
6633 | if (REGNO_QTY_VALID_P (REGNO (x)) | |
6634 | && qty_const[i] != 0 | |
6635 | && (CONSTANT_P (qty_const[i]) | |
6636 | || GET_CODE (qty_const[i]) == REG)) | |
6637 | { | |
6638 | rtx new = gen_lowpart_if_possible (GET_MODE (x), qty_const[i]); | |
6639 | if (new) | |
6640 | return new; | |
6641 | } | |
6642 | ||
6643 | /* Otherwise, canonicalize this register. */ | |
6644 | return canon_reg (x, 0); | |
6645 | } | |
6646 | ||
6647 | for (i = 0; i < GET_RTX_LENGTH (code); i++) | |
6648 | if (fmt[i] == 'e') | |
6649 | validate_change (object, &XEXP (x, i), | |
6650 | cse_process_notes (XEXP (x, i), object), 0); | |
6651 | ||
6652 | return x; | |
6653 | } | |
6654 | \f | |
6655 | /* Find common subexpressions between the end test of a loop and the beginning | |
6656 | of the loop. LOOP_START is the CODE_LABEL at the start of a loop. | |
6657 | ||
6658 | Often we have a loop where an expression in the exit test is used | |
6659 | in the body of the loop. For example "while (*p) *q++ = *p++;". | |
6660 | Because of the way we duplicate the loop exit test in front of the loop, | |
6661 | however, we don't detect that common subexpression. This will be caught | |
6662 | when global cse is implemented, but this is a quite common case. | |
6663 | ||
6664 | This function handles the most common cases of these common expressions. | |
6665 | It is called after we have processed the basic block ending with the | |
6666 | NOTE_INSN_LOOP_END note that ends a loop and the previous JUMP_INSN | |
6667 | jumps to a label used only once. */ | |
6668 | ||
6669 | static void | |
6670 | cse_around_loop (loop_start) | |
6671 | rtx loop_start; | |
6672 | { | |
6673 | rtx insn; | |
6674 | int i; | |
6675 | struct table_elt *p; | |
6676 | ||
6677 | /* If the jump at the end of the loop doesn't go to the start, we don't | |
6678 | do anything. */ | |
6679 | for (insn = PREV_INSN (loop_start); | |
6680 | insn && (GET_CODE (insn) == NOTE && NOTE_LINE_NUMBER (insn) >= 0); | |
6681 | insn = PREV_INSN (insn)) | |
6682 | ; | |
6683 | ||
6684 | if (insn == 0 | |
6685 | || GET_CODE (insn) != NOTE | |
6686 | || NOTE_LINE_NUMBER (insn) != NOTE_INSN_LOOP_BEG) | |
6687 | return; | |
6688 | ||
6689 | /* If the last insn of the loop (the end test) was an NE comparison, | |
6690 | we will interpret it as an EQ comparison, since we fell through | |
6691 | the loop. Any equivalances resulting from that comparison are | |
6692 | therefore not valid and must be invalidated. */ | |
6693 | if (last_jump_equiv_class) | |
6694 | for (p = last_jump_equiv_class->first_same_value; p; | |
6695 | p = p->next_same_value) | |
6696 | if (GET_CODE (p->exp) == MEM || GET_CODE (p->exp) == REG | |
6697 | || GET_CODE (p->exp) == SUBREG) | |
6698 | invalidate (p->exp); | |
6699 | ||
6700 | /* Process insns starting after LOOP_START until we hit a CALL_INSN or | |
6701 | a CODE_LABEL (we could handle a CALL_INSN, but it isn't worth it). | |
6702 | ||
6703 | The only thing we do with SET_DEST is invalidate entries, so we | |
6704 | can safely process each SET in order. It is slightly less efficient | |
6705 | to do so, but we only want to handle the most common cases. */ | |
6706 | ||
6707 | for (insn = NEXT_INSN (loop_start); | |
6708 | GET_CODE (insn) != CALL_INSN && GET_CODE (insn) != CODE_LABEL | |
6709 | && ! (GET_CODE (insn) == NOTE | |
6710 | && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END); | |
6711 | insn = NEXT_INSN (insn)) | |
6712 | { | |
6713 | if (GET_RTX_CLASS (GET_CODE (insn)) == 'i' | |
6714 | && (GET_CODE (PATTERN (insn)) == SET | |
6715 | || GET_CODE (PATTERN (insn)) == CLOBBER)) | |
6716 | cse_set_around_loop (PATTERN (insn), insn, loop_start); | |
6717 | else if (GET_RTX_CLASS (GET_CODE (insn)) == 'i' | |
6718 | && GET_CODE (PATTERN (insn)) == PARALLEL) | |
6719 | for (i = XVECLEN (PATTERN (insn), 0) - 1; i >= 0; i--) | |
6720 | if (GET_CODE (XVECEXP (PATTERN (insn), 0, i)) == SET | |
6721 | || GET_CODE (XVECEXP (PATTERN (insn), 0, i)) == CLOBBER) | |
6722 | cse_set_around_loop (XVECEXP (PATTERN (insn), 0, i), insn, | |
6723 | loop_start); | |
6724 | } | |
6725 | } | |
6726 | \f | |
8b3686ed RK |
6727 | /* Variable used for communications between the next two routines. */ |
6728 | ||
6729 | static struct write_data skipped_writes_memory; | |
6730 | ||
6731 | /* Process one SET of an insn that was skipped. We ignore CLOBBERs | |
6732 | since they are done elsewhere. This function is called via note_stores. */ | |
6733 | ||
6734 | static void | |
6735 | invalidate_skipped_set (dest, set) | |
6736 | rtx set; | |
6737 | rtx dest; | |
6738 | { | |
6739 | if (GET_CODE (set) == CLOBBER | |
6740 | #ifdef HAVE_cc0 | |
6741 | || dest == cc0_rtx | |
6742 | #endif | |
6743 | || dest == pc_rtx) | |
6744 | return; | |
6745 | ||
6746 | if (GET_CODE (dest) == MEM) | |
6747 | note_mem_written (dest, &skipped_writes_memory); | |
6748 | ||
6749 | if (GET_CODE (dest) == REG || GET_CODE (dest) == SUBREG | |
6750 | || (! skipped_writes_memory.all && ! cse_rtx_addr_varies_p (dest))) | |
6751 | invalidate (dest); | |
6752 | } | |
6753 | ||
6754 | /* Invalidate all insns from START up to the end of the function or the | |
6755 | next label. This called when we wish to CSE around a block that is | |
6756 | conditionally executed. */ | |
6757 | ||
6758 | static void | |
6759 | invalidate_skipped_block (start) | |
6760 | rtx start; | |
6761 | { | |
6762 | rtx insn; | |
6763 | int i; | |
6764 | static struct write_data init = {0, 0, 0, 0}; | |
6765 | static struct write_data everything = {0, 1, 1, 1}; | |
6766 | ||
6767 | for (insn = start; insn && GET_CODE (insn) != CODE_LABEL; | |
6768 | insn = NEXT_INSN (insn)) | |
6769 | { | |
6770 | if (GET_RTX_CLASS (GET_CODE (insn)) != 'i') | |
6771 | continue; | |
6772 | ||
6773 | skipped_writes_memory = init; | |
6774 | ||
6775 | if (GET_CODE (insn) == CALL_INSN) | |
6776 | { | |
6777 | invalidate_for_call (); | |
6778 | skipped_writes_memory = everything; | |
6779 | } | |
6780 | ||
6781 | note_stores (PATTERN (insn), invalidate_skipped_set); | |
6782 | invalidate_from_clobbers (&skipped_writes_memory, PATTERN (insn)); | |
6783 | } | |
6784 | } | |
6785 | \f | |
7afe21cc RK |
6786 | /* Used for communication between the following two routines; contains a |
6787 | value to be checked for modification. */ | |
6788 | ||
6789 | static rtx cse_check_loop_start_value; | |
6790 | ||
6791 | /* If modifying X will modify the value in CSE_CHECK_LOOP_START_VALUE, | |
6792 | indicate that fact by setting CSE_CHECK_LOOP_START_VALUE to 0. */ | |
6793 | ||
6794 | static void | |
6795 | cse_check_loop_start (x, set) | |
6796 | rtx x; | |
6797 | rtx set; | |
6798 | { | |
6799 | if (cse_check_loop_start_value == 0 | |
6800 | || GET_CODE (x) == CC0 || GET_CODE (x) == PC) | |
6801 | return; | |
6802 | ||
6803 | if ((GET_CODE (x) == MEM && GET_CODE (cse_check_loop_start_value) == MEM) | |
6804 | || reg_overlap_mentioned_p (x, cse_check_loop_start_value)) | |
6805 | cse_check_loop_start_value = 0; | |
6806 | } | |
6807 | ||
6808 | /* X is a SET or CLOBBER contained in INSN that was found near the start of | |
6809 | a loop that starts with the label at LOOP_START. | |
6810 | ||
6811 | If X is a SET, we see if its SET_SRC is currently in our hash table. | |
6812 | If so, we see if it has a value equal to some register used only in the | |
6813 | loop exit code (as marked by jump.c). | |
6814 | ||
6815 | If those two conditions are true, we search backwards from the start of | |
6816 | the loop to see if that same value was loaded into a register that still | |
6817 | retains its value at the start of the loop. | |
6818 | ||
6819 | If so, we insert an insn after the load to copy the destination of that | |
6820 | load into the equivalent register and (try to) replace our SET_SRC with that | |
6821 | register. | |
6822 | ||
6823 | In any event, we invalidate whatever this SET or CLOBBER modifies. */ | |
6824 | ||
6825 | static void | |
6826 | cse_set_around_loop (x, insn, loop_start) | |
6827 | rtx x; | |
6828 | rtx insn; | |
6829 | rtx loop_start; | |
6830 | { | |
6831 | rtx p; | |
6832 | struct table_elt *src_elt; | |
6833 | static struct write_data init = {0, 0, 0, 0}; | |
6834 | struct write_data writes_memory; | |
6835 | ||
6836 | writes_memory = init; | |
6837 | ||
6838 | /* If this is a SET, see if we can replace SET_SRC, but ignore SETs that | |
6839 | are setting PC or CC0 or whose SET_SRC is already a register. */ | |
6840 | if (GET_CODE (x) == SET | |
6841 | && GET_CODE (SET_DEST (x)) != PC && GET_CODE (SET_DEST (x)) != CC0 | |
6842 | && GET_CODE (SET_SRC (x)) != REG) | |
6843 | { | |
6844 | src_elt = lookup (SET_SRC (x), | |
6845 | HASH (SET_SRC (x), GET_MODE (SET_DEST (x))), | |
6846 | GET_MODE (SET_DEST (x))); | |
6847 | ||
6848 | if (src_elt) | |
6849 | for (src_elt = src_elt->first_same_value; src_elt; | |
6850 | src_elt = src_elt->next_same_value) | |
6851 | if (GET_CODE (src_elt->exp) == REG && REG_LOOP_TEST_P (src_elt->exp) | |
6852 | && COST (src_elt->exp) < COST (SET_SRC (x))) | |
6853 | { | |
6854 | rtx p, set; | |
6855 | ||
6856 | /* Look for an insn in front of LOOP_START that sets | |
6857 | something in the desired mode to SET_SRC (x) before we hit | |
6858 | a label or CALL_INSN. */ | |
6859 | ||
6860 | for (p = prev_nonnote_insn (loop_start); | |
6861 | p && GET_CODE (p) != CALL_INSN | |
6862 | && GET_CODE (p) != CODE_LABEL; | |
6863 | p = prev_nonnote_insn (p)) | |
6864 | if ((set = single_set (p)) != 0 | |
6865 | && GET_CODE (SET_DEST (set)) == REG | |
6866 | && GET_MODE (SET_DEST (set)) == src_elt->mode | |
6867 | && rtx_equal_p (SET_SRC (set), SET_SRC (x))) | |
6868 | { | |
6869 | /* We now have to ensure that nothing between P | |
6870 | and LOOP_START modified anything referenced in | |
6871 | SET_SRC (x). We know that nothing within the loop | |
6872 | can modify it, or we would have invalidated it in | |
6873 | the hash table. */ | |
6874 | rtx q; | |
6875 | ||
6876 | cse_check_loop_start_value = SET_SRC (x); | |
6877 | for (q = p; q != loop_start; q = NEXT_INSN (q)) | |
6878 | if (GET_RTX_CLASS (GET_CODE (q)) == 'i') | |
6879 | note_stores (PATTERN (q), cse_check_loop_start); | |
6880 | ||
6881 | /* If nothing was changed and we can replace our | |
6882 | SET_SRC, add an insn after P to copy its destination | |
6883 | to what we will be replacing SET_SRC with. */ | |
6884 | if (cse_check_loop_start_value | |
6885 | && validate_change (insn, &SET_SRC (x), | |
6886 | src_elt->exp, 0)) | |
6887 | emit_insn_after (gen_move_insn (src_elt->exp, | |
6888 | SET_DEST (set)), | |
6889 | p); | |
6890 | break; | |
6891 | } | |
6892 | } | |
6893 | } | |
6894 | ||
6895 | /* Now invalidate anything modified by X. */ | |
6896 | note_mem_written (SET_DEST (x), &writes_memory); | |
6897 | ||
6898 | if (writes_memory.var) | |
6899 | invalidate_memory (&writes_memory); | |
6900 | ||
6901 | /* See comment on similar code in cse_insn for explanation of these tests. */ | |
6902 | if (GET_CODE (SET_DEST (x)) == REG || GET_CODE (SET_DEST (x)) == SUBREG | |
6903 | || (GET_CODE (SET_DEST (x)) == MEM && ! writes_memory.all | |
6904 | && ! cse_rtx_addr_varies_p (SET_DEST (x)))) | |
6905 | invalidate (SET_DEST (x)); | |
6906 | } | |
6907 | \f | |
6908 | /* Find the end of INSN's basic block and return its range, | |
6909 | the total number of SETs in all the insns of the block, the last insn of the | |
6910 | block, and the branch path. | |
6911 | ||
6912 | The branch path indicates which branches should be followed. If a non-zero | |
6913 | path size is specified, the block should be rescanned and a different set | |
6914 | of branches will be taken. The branch path is only used if | |
8b3686ed | 6915 | FLAG_CSE_FOLLOW_JUMPS or FLAG_CSE_SKIP_BLOCKS is non-zero. |
7afe21cc RK |
6916 | |
6917 | DATA is a pointer to a struct cse_basic_block_data, defined below, that is | |
6918 | used to describe the block. It is filled in with the information about | |
6919 | the current block. The incoming structure's branch path, if any, is used | |
6920 | to construct the output branch path. */ | |
6921 | ||
6922 | /* Define maximum length of a branch path. */ | |
6923 | ||
6924 | #define PATHLENGTH 20 | |
6925 | ||
6926 | struct cse_basic_block_data { | |
6927 | /* Lowest CUID value of insns in block. */ | |
6928 | int low_cuid; | |
6929 | /* Highest CUID value of insns in block. */ | |
6930 | int high_cuid; | |
6931 | /* Total number of SETs in block. */ | |
6932 | int nsets; | |
6933 | /* Last insn in the block. */ | |
6934 | rtx last; | |
6935 | /* Size of current branch path, if any. */ | |
6936 | int path_size; | |
6937 | /* Current branch path, indicating which branches will be taken. */ | |
6938 | struct branch_path { | |
6939 | /* The branch insn. */ | |
6940 | rtx branch; | |
8b3686ed RK |
6941 | /* Whether it should be taken or not. AROUND is the same as taken |
6942 | except that it is used when the destination label is not preceded | |
6943 | by a BARRIER. */ | |
6944 | enum taken {TAKEN, NOT_TAKEN, AROUND} status; | |
7afe21cc RK |
6945 | } path[PATHLENGTH]; |
6946 | }; | |
6947 | ||
6948 | void | |
8b3686ed | 6949 | cse_end_of_basic_block (insn, data, follow_jumps, after_loop, skip_blocks) |
7afe21cc RK |
6950 | rtx insn; |
6951 | struct cse_basic_block_data *data; | |
6952 | int follow_jumps; | |
6953 | int after_loop; | |
8b3686ed | 6954 | int skip_blocks; |
7afe21cc RK |
6955 | { |
6956 | rtx p = insn, q; | |
6957 | int nsets = 0; | |
6958 | int low_cuid = INSN_CUID (insn), high_cuid = INSN_CUID (insn); | |
fc3ffe83 | 6959 | rtx next = GET_RTX_CLASS (GET_CODE (insn)) == 'i' ? insn : next_real_insn (insn); |
7afe21cc RK |
6960 | int path_size = data->path_size; |
6961 | int path_entry = 0; | |
6962 | int i; | |
6963 | ||
6964 | /* Update the previous branch path, if any. If the last branch was | |
6965 | previously TAKEN, mark it NOT_TAKEN. If it was previously NOT_TAKEN, | |
6966 | shorten the path by one and look at the previous branch. We know that | |
6967 | at least one branch must have been taken if PATH_SIZE is non-zero. */ | |
6968 | while (path_size > 0) | |
6969 | { | |
8b3686ed | 6970 | if (data->path[path_size - 1].status != NOT_TAKEN) |
7afe21cc RK |
6971 | { |
6972 | data->path[path_size - 1].status = NOT_TAKEN; | |
6973 | break; | |
6974 | } | |
6975 | else | |
6976 | path_size--; | |
6977 | } | |
6978 | ||
6979 | /* Scan to end of this basic block. */ | |
6980 | while (p && GET_CODE (p) != CODE_LABEL) | |
6981 | { | |
6982 | /* Don't cse out the end of a loop. This makes a difference | |
6983 | only for the unusual loops that always execute at least once; | |
6984 | all other loops have labels there so we will stop in any case. | |
6985 | Cse'ing out the end of the loop is dangerous because it | |
6986 | might cause an invariant expression inside the loop | |
6987 | to be reused after the end of the loop. This would make it | |
6988 | hard to move the expression out of the loop in loop.c, | |
6989 | especially if it is one of several equivalent expressions | |
6990 | and loop.c would like to eliminate it. | |
6991 | ||
6992 | If we are running after loop.c has finished, we can ignore | |
6993 | the NOTE_INSN_LOOP_END. */ | |
6994 | ||
6995 | if (! after_loop && GET_CODE (p) == NOTE | |
6996 | && NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END) | |
6997 | break; | |
6998 | ||
6999 | /* Don't cse over a call to setjmp; on some machines (eg vax) | |
7000 | the regs restored by the longjmp come from | |
7001 | a later time than the setjmp. */ | |
7002 | if (GET_CODE (p) == NOTE | |
7003 | && NOTE_LINE_NUMBER (p) == NOTE_INSN_SETJMP) | |
7004 | break; | |
7005 | ||
7006 | /* A PARALLEL can have lots of SETs in it, | |
7007 | especially if it is really an ASM_OPERANDS. */ | |
7008 | if (GET_RTX_CLASS (GET_CODE (p)) == 'i' | |
7009 | && GET_CODE (PATTERN (p)) == PARALLEL) | |
7010 | nsets += XVECLEN (PATTERN (p), 0); | |
7011 | else if (GET_CODE (p) != NOTE) | |
7012 | nsets += 1; | |
7013 | ||
7014 | if (INSN_CUID (p) > high_cuid) | |
8b3686ed | 7015 | high_cuid = INSN_CUID (p); |
7afe21cc | 7016 | if (INSN_CUID (p) < low_cuid) |
8b3686ed | 7017 | low_cuid = INSN_CUID(p); |
7afe21cc RK |
7018 | |
7019 | /* See if this insn is in our branch path. If it is and we are to | |
7020 | take it, do so. */ | |
7021 | if (path_entry < path_size && data->path[path_entry].branch == p) | |
7022 | { | |
8b3686ed | 7023 | if (data->path[path_entry].status != NOT_TAKEN) |
7afe21cc RK |
7024 | p = JUMP_LABEL (p); |
7025 | ||
7026 | /* Point to next entry in path, if any. */ | |
7027 | path_entry++; | |
7028 | } | |
7029 | ||
7030 | /* If this is a conditional jump, we can follow it if -fcse-follow-jumps | |
7031 | was specified, we haven't reached our maximum path length, there are | |
7032 | insns following the target of the jump, this is the only use of the | |
8b3686ed RK |
7033 | jump label, and the target label is preceded by a BARRIER. |
7034 | ||
7035 | Alternatively, we can follow the jump if it branches around a | |
7036 | block of code and there are no other branches into the block. | |
7037 | In this case invalidate_skipped_block will be called to invalidate any | |
7038 | registers set in the block when following the jump. */ | |
7039 | ||
7040 | else if ((follow_jumps || skip_blocks) && path_size < PATHLENGTH - 1 | |
7afe21cc RK |
7041 | && GET_CODE (p) == JUMP_INSN |
7042 | && GET_CODE (PATTERN (p)) == SET | |
7043 | && GET_CODE (SET_SRC (PATTERN (p))) == IF_THEN_ELSE | |
7044 | && LABEL_NUSES (JUMP_LABEL (p)) == 1 | |
7045 | && NEXT_INSN (JUMP_LABEL (p)) != 0) | |
7046 | { | |
7047 | for (q = PREV_INSN (JUMP_LABEL (p)); q; q = PREV_INSN (q)) | |
7048 | if ((GET_CODE (q) != NOTE | |
7049 | || NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_END | |
7050 | || NOTE_LINE_NUMBER (q) == NOTE_INSN_SETJMP) | |
7051 | && (GET_CODE (q) != CODE_LABEL || LABEL_NUSES (q) != 0)) | |
7052 | break; | |
7053 | ||
7054 | /* If we ran into a BARRIER, this code is an extension of the | |
7055 | basic block when the branch is taken. */ | |
8b3686ed | 7056 | if (follow_jumps && q != 0 && GET_CODE (q) == BARRIER) |
7afe21cc RK |
7057 | { |
7058 | /* Don't allow ourself to keep walking around an | |
7059 | always-executed loop. */ | |
fc3ffe83 RK |
7060 | if (next_real_insn (q) == next) |
7061 | { | |
7062 | p = NEXT_INSN (p); | |
7063 | continue; | |
7064 | } | |
7afe21cc RK |
7065 | |
7066 | /* Similarly, don't put a branch in our path more than once. */ | |
7067 | for (i = 0; i < path_entry; i++) | |
7068 | if (data->path[i].branch == p) | |
7069 | break; | |
7070 | ||
7071 | if (i != path_entry) | |
7072 | break; | |
7073 | ||
7074 | data->path[path_entry].branch = p; | |
7075 | data->path[path_entry++].status = TAKEN; | |
7076 | ||
7077 | /* This branch now ends our path. It was possible that we | |
7078 | didn't see this branch the last time around (when the | |
7079 | insn in front of the target was a JUMP_INSN that was | |
7080 | turned into a no-op). */ | |
7081 | path_size = path_entry; | |
7082 | ||
7083 | p = JUMP_LABEL (p); | |
7084 | /* Mark block so we won't scan it again later. */ | |
7085 | PUT_MODE (NEXT_INSN (p), QImode); | |
7086 | } | |
8b3686ed RK |
7087 | /* Detect a branch around a block of code. */ |
7088 | else if (skip_blocks && q != 0 && GET_CODE (q) != CODE_LABEL) | |
7089 | { | |
7090 | register rtx tmp; | |
7091 | ||
fc3ffe83 RK |
7092 | if (next_real_insn (q) == next) |
7093 | { | |
7094 | p = NEXT_INSN (p); | |
7095 | continue; | |
7096 | } | |
8b3686ed RK |
7097 | |
7098 | for (i = 0; i < path_entry; i++) | |
7099 | if (data->path[i].branch == p) | |
7100 | break; | |
7101 | ||
7102 | if (i != path_entry) | |
7103 | break; | |
7104 | ||
7105 | /* This is no_labels_between_p (p, q) with an added check for | |
7106 | reaching the end of a function (in case Q precedes P). */ | |
7107 | for (tmp = NEXT_INSN (p); tmp && tmp != q; tmp = NEXT_INSN (tmp)) | |
7108 | if (GET_CODE (tmp) == CODE_LABEL) | |
7109 | break; | |
7110 | ||
7111 | if (tmp == q) | |
7112 | { | |
7113 | data->path[path_entry].branch = p; | |
7114 | data->path[path_entry++].status = AROUND; | |
7115 | ||
7116 | path_size = path_entry; | |
7117 | ||
7118 | p = JUMP_LABEL (p); | |
7119 | /* Mark block so we won't scan it again later. */ | |
7120 | PUT_MODE (NEXT_INSN (p), QImode); | |
7121 | } | |
7122 | } | |
7afe21cc | 7123 | } |
7afe21cc RK |
7124 | p = NEXT_INSN (p); |
7125 | } | |
7126 | ||
7127 | data->low_cuid = low_cuid; | |
7128 | data->high_cuid = high_cuid; | |
7129 | data->nsets = nsets; | |
7130 | data->last = p; | |
7131 | ||
7132 | /* If all jumps in the path are not taken, set our path length to zero | |
7133 | so a rescan won't be done. */ | |
7134 | for (i = path_size - 1; i >= 0; i--) | |
8b3686ed | 7135 | if (data->path[i].status != NOT_TAKEN) |
7afe21cc RK |
7136 | break; |
7137 | ||
7138 | if (i == -1) | |
7139 | data->path_size = 0; | |
7140 | else | |
7141 | data->path_size = path_size; | |
7142 | ||
7143 | /* End the current branch path. */ | |
7144 | data->path[path_size].branch = 0; | |
7145 | } | |
7146 | \f | |
7147 | static rtx cse_basic_block (); | |
7148 | ||
7149 | /* Perform cse on the instructions of a function. | |
7150 | F is the first instruction. | |
7151 | NREGS is one plus the highest pseudo-reg number used in the instruction. | |
7152 | ||
7153 | AFTER_LOOP is 1 if this is the cse call done after loop optimization | |
7154 | (only if -frerun-cse-after-loop). | |
7155 | ||
7156 | Returns 1 if jump_optimize should be redone due to simplifications | |
7157 | in conditional jump instructions. */ | |
7158 | ||
7159 | int | |
7160 | cse_main (f, nregs, after_loop, file) | |
7161 | rtx f; | |
7162 | int nregs; | |
7163 | int after_loop; | |
7164 | FILE *file; | |
7165 | { | |
7166 | struct cse_basic_block_data val; | |
7167 | register rtx insn = f; | |
7168 | register int i; | |
7169 | ||
7170 | cse_jumps_altered = 0; | |
7171 | constant_pool_entries_cost = 0; | |
7172 | val.path_size = 0; | |
7173 | ||
7174 | init_recog (); | |
7175 | ||
7176 | max_reg = nregs; | |
7177 | ||
7178 | all_minus_one = (int *) alloca (nregs * sizeof (int)); | |
7179 | consec_ints = (int *) alloca (nregs * sizeof (int)); | |
7180 | ||
7181 | for (i = 0; i < nregs; i++) | |
7182 | { | |
7183 | all_minus_one[i] = -1; | |
7184 | consec_ints[i] = i; | |
7185 | } | |
7186 | ||
7187 | reg_next_eqv = (int *) alloca (nregs * sizeof (int)); | |
7188 | reg_prev_eqv = (int *) alloca (nregs * sizeof (int)); | |
7189 | reg_qty = (int *) alloca (nregs * sizeof (int)); | |
7190 | reg_in_table = (int *) alloca (nregs * sizeof (int)); | |
7191 | reg_tick = (int *) alloca (nregs * sizeof (int)); | |
7192 | ||
7193 | /* Discard all the free elements of the previous function | |
7194 | since they are allocated in the temporarily obstack. */ | |
7195 | bzero (table, sizeof table); | |
7196 | free_element_chain = 0; | |
7197 | n_elements_made = 0; | |
7198 | ||
7199 | /* Find the largest uid. */ | |
7200 | ||
7201 | i = get_max_uid (); | |
7202 | uid_cuid = (short *) alloca ((i + 1) * sizeof (short)); | |
7203 | bzero (uid_cuid, (i + 1) * sizeof (short)); | |
7204 | ||
7205 | /* Compute the mapping from uids to cuids. | |
7206 | CUIDs are numbers assigned to insns, like uids, | |
7207 | except that cuids increase monotonically through the code. | |
7208 | Don't assign cuids to line-number NOTEs, so that the distance in cuids | |
7209 | between two insns is not affected by -g. */ | |
7210 | ||
7211 | for (insn = f, i = 0; insn; insn = NEXT_INSN (insn)) | |
7212 | { | |
7213 | if (GET_CODE (insn) != NOTE | |
7214 | || NOTE_LINE_NUMBER (insn) < 0) | |
7215 | INSN_CUID (insn) = ++i; | |
7216 | else | |
7217 | /* Give a line number note the same cuid as preceding insn. */ | |
7218 | INSN_CUID (insn) = i; | |
7219 | } | |
7220 | ||
7221 | /* Initialize which registers are clobbered by calls. */ | |
7222 | ||
7223 | CLEAR_HARD_REG_SET (regs_invalidated_by_call); | |
7224 | ||
7225 | for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) | |
7226 | if ((call_used_regs[i] | |
7227 | /* Used to check !fixed_regs[i] here, but that isn't safe; | |
7228 | fixed regs are still call-clobbered, and sched can get | |
7229 | confused if they can "live across calls". | |
7230 | ||
7231 | The frame pointer is always preserved across calls. The arg | |
7232 | pointer is if it is fixed. The stack pointer usually is, unless | |
7233 | RETURN_POPS_ARGS, in which case an explicit CLOBBER | |
7234 | will be present. If we are generating PIC code, the PIC offset | |
7235 | table register is preserved across calls. */ | |
7236 | ||
7237 | && i != STACK_POINTER_REGNUM | |
7238 | && i != FRAME_POINTER_REGNUM | |
7239 | #if ARG_POINTER_REGNUM != FRAME_POINTER_REGNUM | |
7240 | && ! (i == ARG_POINTER_REGNUM && fixed_regs[i]) | |
7241 | #endif | |
7242 | #ifdef PIC_OFFSET_TABLE_REGNUM | |
7243 | && ! (i == PIC_OFFSET_TABLE_REGNUM && flag_pic) | |
7244 | #endif | |
7245 | ) | |
7246 | || global_regs[i]) | |
7247 | SET_HARD_REG_BIT (regs_invalidated_by_call, i); | |
7248 | ||
7249 | /* Loop over basic blocks. | |
7250 | Compute the maximum number of qty's needed for each basic block | |
7251 | (which is 2 for each SET). */ | |
7252 | insn = f; | |
7253 | while (insn) | |
7254 | { | |
8b3686ed RK |
7255 | cse_end_of_basic_block (insn, &val, flag_cse_follow_jumps, after_loop, |
7256 | flag_cse_skip_blocks); | |
7afe21cc RK |
7257 | |
7258 | /* If this basic block was already processed or has no sets, skip it. */ | |
7259 | if (val.nsets == 0 || GET_MODE (insn) == QImode) | |
7260 | { | |
7261 | PUT_MODE (insn, VOIDmode); | |
7262 | insn = (val.last ? NEXT_INSN (val.last) : 0); | |
7263 | val.path_size = 0; | |
7264 | continue; | |
7265 | } | |
7266 | ||
7267 | cse_basic_block_start = val.low_cuid; | |
7268 | cse_basic_block_end = val.high_cuid; | |
7269 | max_qty = val.nsets * 2; | |
7270 | ||
7271 | if (file) | |
7272 | fprintf (file, ";; Processing block from %d to %d, %d sets.\n", | |
7273 | INSN_UID (insn), val.last ? INSN_UID (val.last) : 0, | |
7274 | val.nsets); | |
7275 | ||
7276 | /* Make MAX_QTY bigger to give us room to optimize | |
7277 | past the end of this basic block, if that should prove useful. */ | |
7278 | if (max_qty < 500) | |
7279 | max_qty = 500; | |
7280 | ||
7281 | max_qty += max_reg; | |
7282 | ||
7283 | /* If this basic block is being extended by following certain jumps, | |
7284 | (see `cse_end_of_basic_block'), we reprocess the code from the start. | |
7285 | Otherwise, we start after this basic block. */ | |
7286 | if (val.path_size > 0) | |
7287 | cse_basic_block (insn, val.last, val.path, 0); | |
7288 | else | |
7289 | { | |
7290 | int old_cse_jumps_altered = cse_jumps_altered; | |
7291 | rtx temp; | |
7292 | ||
7293 | /* When cse changes a conditional jump to an unconditional | |
7294 | jump, we want to reprocess the block, since it will give | |
7295 | us a new branch path to investigate. */ | |
7296 | cse_jumps_altered = 0; | |
7297 | temp = cse_basic_block (insn, val.last, val.path, ! after_loop); | |
8b3686ed RK |
7298 | if (cse_jumps_altered == 0 |
7299 | || (flag_cse_follow_jumps == 0 && flag_cse_skip_blocks == 0)) | |
7afe21cc RK |
7300 | insn = temp; |
7301 | ||
7302 | cse_jumps_altered |= old_cse_jumps_altered; | |
7303 | } | |
7304 | ||
7305 | #ifdef USE_C_ALLOCA | |
7306 | alloca (0); | |
7307 | #endif | |
7308 | } | |
7309 | ||
7310 | /* Tell refers_to_mem_p that qty_const info is not available. */ | |
7311 | qty_const = 0; | |
7312 | ||
7313 | if (max_elements_made < n_elements_made) | |
7314 | max_elements_made = n_elements_made; | |
7315 | ||
7316 | return cse_jumps_altered; | |
7317 | } | |
7318 | ||
7319 | /* Process a single basic block. FROM and TO and the limits of the basic | |
7320 | block. NEXT_BRANCH points to the branch path when following jumps or | |
7321 | a null path when not following jumps. | |
7322 | ||
7323 | AROUND_LOOP is non-zero if we are to try to cse around to the start of a | |
7324 | loop. This is true when we are being called for the last time on a | |
7325 | block and this CSE pass is before loop.c. */ | |
7326 | ||
7327 | static rtx | |
7328 | cse_basic_block (from, to, next_branch, around_loop) | |
7329 | register rtx from, to; | |
7330 | struct branch_path *next_branch; | |
7331 | int around_loop; | |
7332 | { | |
7333 | register rtx insn; | |
7334 | int to_usage = 0; | |
7335 | int in_libcall_block = 0; | |
7336 | ||
7337 | /* Each of these arrays is undefined before max_reg, so only allocate | |
7338 | the space actually needed and adjust the start below. */ | |
7339 | ||
7340 | qty_first_reg = (int *) alloca ((max_qty - max_reg) * sizeof (int)); | |
7341 | qty_last_reg = (int *) alloca ((max_qty - max_reg) * sizeof (int)); | |
7342 | qty_mode= (enum machine_mode *) alloca ((max_qty - max_reg) * sizeof (enum machine_mode)); | |
7343 | qty_const = (rtx *) alloca ((max_qty - max_reg) * sizeof (rtx)); | |
7344 | qty_const_insn = (rtx *) alloca ((max_qty - max_reg) * sizeof (rtx)); | |
7345 | qty_comparison_code | |
7346 | = (enum rtx_code *) alloca ((max_qty - max_reg) * sizeof (enum rtx_code)); | |
7347 | qty_comparison_qty = (int *) alloca ((max_qty - max_reg) * sizeof (int)); | |
7348 | qty_comparison_const = (rtx *) alloca ((max_qty - max_reg) * sizeof (rtx)); | |
7349 | ||
7350 | qty_first_reg -= max_reg; | |
7351 | qty_last_reg -= max_reg; | |
7352 | qty_mode -= max_reg; | |
7353 | qty_const -= max_reg; | |
7354 | qty_const_insn -= max_reg; | |
7355 | qty_comparison_code -= max_reg; | |
7356 | qty_comparison_qty -= max_reg; | |
7357 | qty_comparison_const -= max_reg; | |
7358 | ||
7359 | new_basic_block (); | |
7360 | ||
7361 | /* TO might be a label. If so, protect it from being deleted. */ | |
7362 | if (to != 0 && GET_CODE (to) == CODE_LABEL) | |
7363 | ++LABEL_NUSES (to); | |
7364 | ||
7365 | for (insn = from; insn != to; insn = NEXT_INSN (insn)) | |
7366 | { | |
7367 | register enum rtx_code code; | |
7368 | ||
7369 | /* See if this is a branch that is part of the path. If so, and it is | |
7370 | to be taken, do so. */ | |
7371 | if (next_branch->branch == insn) | |
7372 | { | |
8b3686ed RK |
7373 | enum taken status = next_branch++->status; |
7374 | if (status != NOT_TAKEN) | |
7afe21cc | 7375 | { |
8b3686ed RK |
7376 | if (status == TAKEN) |
7377 | record_jump_equiv (insn, 1); | |
7378 | else | |
7379 | invalidate_skipped_block (NEXT_INSN (insn)); | |
7380 | ||
7afe21cc RK |
7381 | /* Set the last insn as the jump insn; it doesn't affect cc0. |
7382 | Then follow this branch. */ | |
7383 | #ifdef HAVE_cc0 | |
7384 | prev_insn_cc0 = 0; | |
7385 | #endif | |
7386 | prev_insn = insn; | |
7387 | insn = JUMP_LABEL (insn); | |
7388 | continue; | |
7389 | } | |
7390 | } | |
7391 | ||
7392 | code = GET_CODE (insn); | |
7393 | if (GET_MODE (insn) == QImode) | |
7394 | PUT_MODE (insn, VOIDmode); | |
7395 | ||
7396 | if (GET_RTX_CLASS (code) == 'i') | |
7397 | { | |
7398 | /* Process notes first so we have all notes in canonical forms when | |
7399 | looking for duplicate operations. */ | |
7400 | ||
7401 | if (REG_NOTES (insn)) | |
7402 | REG_NOTES (insn) = cse_process_notes (REG_NOTES (insn), 0); | |
7403 | ||
7404 | /* Track when we are inside in LIBCALL block. Inside such a block, | |
7405 | we do not want to record destinations. The last insn of a | |
7406 | LIBCALL block is not considered to be part of the block, since | |
830a38ee | 7407 | its destination is the result of the block and hence should be |
7afe21cc RK |
7408 | recorded. */ |
7409 | ||
7410 | if (find_reg_note (insn, REG_LIBCALL, 0)) | |
7411 | in_libcall_block = 1; | |
7412 | else if (find_reg_note (insn, REG_RETVAL, 0)) | |
7413 | in_libcall_block = 0; | |
7414 | ||
7415 | cse_insn (insn, in_libcall_block); | |
7416 | } | |
7417 | ||
7418 | /* If INSN is now an unconditional jump, skip to the end of our | |
7419 | basic block by pretending that we just did the last insn in the | |
7420 | basic block. If we are jumping to the end of our block, show | |
7421 | that we can have one usage of TO. */ | |
7422 | ||
7423 | if (simplejump_p (insn)) | |
7424 | { | |
7425 | if (to == 0) | |
7426 | return 0; | |
7427 | ||
7428 | if (JUMP_LABEL (insn) == to) | |
7429 | to_usage = 1; | |
7430 | ||
7431 | insn = PREV_INSN (to); | |
7432 | } | |
7433 | ||
7434 | /* See if it is ok to keep on going past the label | |
7435 | which used to end our basic block. Remember that we incremented | |
d45cf215 | 7436 | the count of that label, so we decrement it here. If we made |
7afe21cc RK |
7437 | a jump unconditional, TO_USAGE will be one; in that case, we don't |
7438 | want to count the use in that jump. */ | |
7439 | ||
7440 | if (to != 0 && NEXT_INSN (insn) == to | |
7441 | && GET_CODE (to) == CODE_LABEL && --LABEL_NUSES (to) == to_usage) | |
7442 | { | |
7443 | struct cse_basic_block_data val; | |
7444 | ||
7445 | insn = NEXT_INSN (to); | |
7446 | ||
7447 | if (LABEL_NUSES (to) == 0) | |
7448 | delete_insn (to); | |
7449 | ||
7450 | /* Find the end of the following block. Note that we won't be | |
7451 | following branches in this case. If TO was the last insn | |
7452 | in the function, we are done. Similarly, if we deleted the | |
d45cf215 | 7453 | insn after TO, it must have been because it was preceded by |
7afe21cc RK |
7454 | a BARRIER. In that case, we are done with this block because it |
7455 | has no continuation. */ | |
7456 | ||
7457 | if (insn == 0 || INSN_DELETED_P (insn)) | |
7458 | return 0; | |
7459 | ||
7460 | to_usage = 0; | |
7461 | val.path_size = 0; | |
8b3686ed | 7462 | cse_end_of_basic_block (insn, &val, 0, 0, 0); |
7afe21cc RK |
7463 | |
7464 | /* If the tables we allocated have enough space left | |
7465 | to handle all the SETs in the next basic block, | |
7466 | continue through it. Otherwise, return, | |
7467 | and that block will be scanned individually. */ | |
7468 | if (val.nsets * 2 + next_qty > max_qty) | |
7469 | break; | |
7470 | ||
7471 | cse_basic_block_start = val.low_cuid; | |
7472 | cse_basic_block_end = val.high_cuid; | |
7473 | to = val.last; | |
7474 | ||
7475 | /* Prevent TO from being deleted if it is a label. */ | |
7476 | if (to != 0 && GET_CODE (to) == CODE_LABEL) | |
7477 | ++LABEL_NUSES (to); | |
7478 | ||
7479 | /* Back up so we process the first insn in the extension. */ | |
7480 | insn = PREV_INSN (insn); | |
7481 | } | |
7482 | } | |
7483 | ||
7484 | if (next_qty > max_qty) | |
7485 | abort (); | |
7486 | ||
7487 | /* If we are running before loop.c, we stopped on a NOTE_INSN_LOOP_END, and | |
7488 | the previous insn is the only insn that branches to the head of a loop, | |
7489 | we can cse into the loop. Don't do this if we changed the jump | |
7490 | structure of a loop unless we aren't going to be following jumps. */ | |
7491 | ||
8b3686ed RK |
7492 | if ((cse_jumps_altered == 0 |
7493 | || (flag_cse_follow_jumps == 0 && flag_cse_skip_blocks == 0)) | |
7afe21cc RK |
7494 | && around_loop && to != 0 |
7495 | && GET_CODE (to) == NOTE && NOTE_LINE_NUMBER (to) == NOTE_INSN_LOOP_END | |
7496 | && GET_CODE (PREV_INSN (to)) == JUMP_INSN | |
7497 | && JUMP_LABEL (PREV_INSN (to)) != 0 | |
7498 | && LABEL_NUSES (JUMP_LABEL (PREV_INSN (to))) == 1) | |
7499 | cse_around_loop (JUMP_LABEL (PREV_INSN (to))); | |
7500 | ||
7501 | return to ? NEXT_INSN (to) : 0; | |
7502 | } | |
7503 | \f | |
7504 | /* Count the number of times registers are used (not set) in X. | |
7505 | COUNTS is an array in which we accumulate the count, INCR is how much | |
7506 | we count each register usage. */ | |
7507 | ||
7508 | static void | |
7509 | count_reg_usage (x, counts, incr) | |
7510 | rtx x; | |
7511 | int *counts; | |
7512 | int incr; | |
7513 | { | |
7514 | enum rtx_code code = GET_CODE (x); | |
7515 | char *fmt; | |
7516 | int i, j; | |
7517 | ||
7518 | switch (code) | |
7519 | { | |
7520 | case REG: | |
7521 | counts[REGNO (x)] += incr; | |
7522 | return; | |
7523 | ||
7524 | case PC: | |
7525 | case CC0: | |
7526 | case CONST: | |
7527 | case CONST_INT: | |
7528 | case CONST_DOUBLE: | |
7529 | case SYMBOL_REF: | |
7530 | case LABEL_REF: | |
7531 | case CLOBBER: | |
7532 | return; | |
7533 | ||
7534 | case SET: | |
7535 | /* Unless we are setting a REG, count everything in SET_DEST. */ | |
7536 | if (GET_CODE (SET_DEST (x)) != REG) | |
7537 | count_reg_usage (SET_DEST (x), counts, incr); | |
7538 | count_reg_usage (SET_SRC (x), counts, incr); | |
7539 | return; | |
7540 | ||
7541 | case INSN: | |
7542 | case JUMP_INSN: | |
7543 | case CALL_INSN: | |
7544 | count_reg_usage (PATTERN (x), counts, incr); | |
7545 | ||
7546 | /* Things used in a REG_EQUAL note aren't dead since loop may try to | |
7547 | use them. */ | |
7548 | ||
7549 | if (REG_NOTES (x)) | |
7550 | count_reg_usage (REG_NOTES (x), counts, incr); | |
7551 | return; | |
7552 | ||
7553 | case EXPR_LIST: | |
7554 | case INSN_LIST: | |
7555 | if (REG_NOTE_KIND (x) == REG_EQUAL) | |
7556 | count_reg_usage (XEXP (x, 0), counts, incr); | |
7557 | if (XEXP (x, 1)) | |
7558 | count_reg_usage (XEXP (x, 1), counts, incr); | |
7559 | return; | |
7560 | } | |
7561 | ||
7562 | fmt = GET_RTX_FORMAT (code); | |
7563 | for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) | |
7564 | { | |
7565 | if (fmt[i] == 'e') | |
7566 | count_reg_usage (XEXP (x, i), counts, incr); | |
7567 | else if (fmt[i] == 'E') | |
7568 | for (j = XVECLEN (x, i) - 1; j >= 0; j--) | |
7569 | count_reg_usage (XVECEXP (x, i, j), counts, incr); | |
7570 | } | |
7571 | } | |
7572 | \f | |
7573 | /* Scan all the insns and delete any that are dead; i.e., they store a register | |
7574 | that is never used or they copy a register to itself. | |
7575 | ||
7576 | This is used to remove insns made obviously dead by cse. It improves the | |
7577 | heuristics in loop since it won't try to move dead invariants out of loops | |
7578 | or make givs for dead quantities. The remaining passes of the compilation | |
7579 | are also sped up. */ | |
7580 | ||
7581 | void | |
7582 | delete_dead_from_cse (insns, nreg) | |
7583 | rtx insns; | |
7584 | int nreg; | |
7585 | { | |
7586 | int *counts = (int *) alloca (nreg * sizeof (int)); | |
7587 | rtx insn; | |
d45cf215 | 7588 | rtx tem; |
7afe21cc RK |
7589 | int i; |
7590 | ||
7591 | /* First count the number of times each register is used. */ | |
7592 | bzero (counts, sizeof (int) * nreg); | |
7593 | for (insn = next_real_insn (insns); insn; insn = next_real_insn (insn)) | |
7594 | count_reg_usage (insn, counts, 1); | |
7595 | ||
7596 | /* Go from the last insn to the first and delete insns that only set unused | |
7597 | registers or copy a register to itself. As we delete an insn, remove | |
7598 | usage counts for registers it uses. */ | |
7599 | for (insn = prev_real_insn (get_last_insn ()); | |
7600 | insn; insn = prev_real_insn (insn)) | |
7601 | { | |
7602 | int live_insn = 0; | |
7603 | ||
7604 | if (GET_CODE (PATTERN (insn)) == SET) | |
7605 | { | |
7606 | if (GET_CODE (SET_DEST (PATTERN (insn))) == REG | |
7607 | && SET_DEST (PATTERN (insn)) == SET_SRC (PATTERN (insn))) | |
7608 | ; | |
7609 | ||
d45cf215 RS |
7610 | #ifdef HAVE_cc0 |
7611 | else if (GET_CODE (SET_DEST (PATTERN (insn))) == CC0 | |
7612 | && ! side_effects_p (SET_SRC (PATTERN (insn))) | |
7613 | && ((tem = next_nonnote_insn (insn)) == 0 | |
7614 | || GET_RTX_CLASS (GET_CODE (tem)) != 'i' | |
7615 | || ! reg_referenced_p (cc0_rtx, PATTERN (tem)))) | |
7616 | ; | |
7617 | #endif | |
7afe21cc RK |
7618 | else if (GET_CODE (SET_DEST (PATTERN (insn))) != REG |
7619 | || REGNO (SET_DEST (PATTERN (insn))) < FIRST_PSEUDO_REGISTER | |
7620 | || counts[REGNO (SET_DEST (PATTERN (insn)))] != 0 | |
7621 | || side_effects_p (SET_SRC (PATTERN (insn)))) | |
7622 | live_insn = 1; | |
7623 | } | |
7624 | else if (GET_CODE (PATTERN (insn)) == PARALLEL) | |
7625 | for (i = XVECLEN (PATTERN (insn), 0) - 1; i >= 0; i--) | |
7626 | { | |
7627 | rtx elt = XVECEXP (PATTERN (insn), 0, i); | |
7628 | ||
7629 | if (GET_CODE (elt) == SET) | |
7630 | { | |
7631 | if (GET_CODE (SET_DEST (elt)) == REG | |
7632 | && SET_DEST (elt) == SET_SRC (elt)) | |
7633 | ; | |
7634 | ||
d45cf215 RS |
7635 | #ifdef HAVE_cc0 |
7636 | else if (GET_CODE (SET_DEST (elt)) == CC0 | |
7637 | && ! side_effects_p (SET_SRC (elt)) | |
7638 | && ((tem = next_nonnote_insn (insn)) == 0 | |
7639 | || GET_RTX_CLASS (GET_CODE (tem)) != 'i' | |
7640 | || ! reg_referenced_p (cc0_rtx, PATTERN (tem)))) | |
7641 | ; | |
7642 | #endif | |
7afe21cc RK |
7643 | else if (GET_CODE (SET_DEST (elt)) != REG |
7644 | || REGNO (SET_DEST (elt)) < FIRST_PSEUDO_REGISTER | |
7645 | || counts[REGNO (SET_DEST (elt))] != 0 | |
7646 | || side_effects_p (SET_SRC (elt))) | |
7647 | live_insn = 1; | |
7648 | } | |
7649 | else if (GET_CODE (elt) != CLOBBER && GET_CODE (elt) != USE) | |
7650 | live_insn = 1; | |
7651 | } | |
7652 | else | |
7653 | live_insn = 1; | |
7654 | ||
7655 | /* If this is a dead insn, delete it and show registers in it aren't | |
7656 | being used. If this is the last insn of a libcall sequence, don't | |
7657 | delete it even if it is dead because we don't know how to do so | |
7658 | here. */ | |
7659 | ||
7660 | if (! live_insn && ! find_reg_note (insn, REG_RETVAL, 0)) | |
7661 | { | |
7662 | count_reg_usage (insn, counts, -1); | |
7663 | PUT_CODE (insn, NOTE); | |
7664 | NOTE_SOURCE_FILE (insn) = 0; | |
7665 | NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED; | |
7666 | } | |
7667 | } | |
7668 | } |