]>
Commit | Line | Data |
---|---|---|
ba8ab355 JW |
1 | /* Definitions of target machine for GNU compiler, for Intel 80960 |
2 | Copyright (C) 1992 Free Software Foundation, Inc. | |
3 | Contributed by Steven McGeady, Intel Corp. | |
4 | Additional Work by Glenn Colon-Bonet, Jonathan Shapiro, Andy Wilson | |
5 | Converted to GCC 2.0 by Jim Wilson and Michael Tiemann, Cygnus Support. | |
6 | ||
7 | This file is part of GNU CC. | |
8 | ||
9 | GNU CC is free software; you can redistribute it and/or modify | |
10 | it under the terms of the GNU General Public License as published by | |
11 | the Free Software Foundation; either version 2, or (at your option) | |
12 | any later version. | |
13 | ||
14 | GNU CC is distributed in the hope that it will be useful, | |
15 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | GNU General Public License for more details. | |
18 | ||
19 | You should have received a copy of the GNU General Public License | |
20 | along with GNU CC; see the file COPYING. If not, write to | |
21 | the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ | |
22 | ||
23 | /* Note that some other tm.h files may include this one and then override | |
24 | many of the definitions that relate to assembler syntax. */ | |
25 | ||
26 | /* Names to predefine in the preprocessor for this target machine. */ | |
27 | #define CPP_PREDEFINES "-Di960 -Di80960 -DI960 -DI80960" | |
28 | ||
29 | /* Name to predefine in the preprocessor for processor variations. */ | |
30 | #define CPP_SPEC "%{mic*:-D__i960\ | |
c3eebffb JW |
31 | %{mka:-D__i960KA}%{mkb:-D__i960KB}\ |
32 | %{msa:-D__i960SA}%{msb:-D__i960SB}\ | |
ba8ab355 | 33 | %{mmc:-D__i960MC}\ |
c3eebffb | 34 | %{mca:-D__i960CA}%{mcc:-D__i960CC}\ |
ba8ab355 JW |
35 | %{mcf:-D__i960CF}}\ |
36 | %{mka:-D__i960KA__ -D__i960_KA__}\ | |
37 | %{mkb:-D__i960KB__ -D__i960_KB__}\ | |
ba8ab355 JW |
38 | %{msa:-D__i960SA__ -D__i960_SA__}\ |
39 | %{msb:-D__i960SB__ -D__i960_SB__}\ | |
ba8ab355 JW |
40 | %{mmc:-D__i960MC__ -D__i960_MC__}\ |
41 | %{mca:-D__i960CA__ -D__i960_CA__}\ | |
ba8ab355 JW |
42 | %{mcc:-D__i960CC__ -D__i960_CC__}\ |
43 | %{mcf:-D__i960CF__ -D__i960_CF__}\ | |
c3eebffb JW |
44 | %{!mka:%{!mkb:%{!msa:%{!msb:%{!mmc:%{!mca:\ |
45 | %{!mcc:%{!mcf:-D__i960_KB -D__i960KB__ %{mic*:-D__i960KB}}}}}}}}}" | |
ba8ab355 JW |
46 | |
47 | /* -mic* options make characters signed by default. */ | |
48 | #define SIGNED_CHAR_SPEC \ | |
49 | (DEFAULT_SIGNED_CHAR ? "%{funsigned-char:-D__CHAR_UNSIGNED__}" \ | |
50 | : "%{!fsigned-char:%{!mic*:-D__CHAR_UNSIGNED__}}") | |
51 | ||
52 | /* Specs for the compiler, to handle processor variations. */ | |
53 | #define CC1_SPEC \ | |
c3eebffb | 54 | "%{!mka:%{!mkb:%{!msa:%{!msb:%{!mmc:%{!mca:%{!mcc:%{!mcf:-mkb}}}}}}}}\ |
ba8ab355 JW |
55 | %{mbout:%{g*:-gstabs}}\ |
56 | %{mcoff:%{g*:-gcoff}}\ | |
57 | %{!mbout:%{!mcoff:%{g*:-gstabs}}}" | |
58 | ||
59 | /* Specs for the assembler, to handle processor variations. | |
60 | For compatibility with Intel's gnu960 tool chain, pass -A options to | |
61 | the assembler. */ | |
62 | #define ASM_SPEC \ | |
c3eebffb JW |
63 | "%{mka:-AKA}%{mkb:-AKB}%{msa:-ASA}%{msb:-ASB}\ |
64 | %{mmc:-AMC}%{mca:-ACA}%{mcc:-ACC}%{mcf:-ACF}\ | |
65 | %{!mka:%{!mkb:%{!msa:%{!msb:%{!mmc:%{!mca:%{!mcc:%{!mcf:-AKB}}}}}}}}\ | |
66 | %{mlink-relax:-link-relax}" | |
ba8ab355 JW |
67 | |
68 | /* Specs for the linker, to handle processor variations. | |
69 | For compatibility with Intel's gnu960 tool chain, pass -F and -A options | |
70 | to the linker. */ | |
71 | #define LINK_SPEC \ | |
c3eebffb JW |
72 | "%{mka:-AKA}%{mkb:-AKB}%{msa:-ASA}%{msb:-ASB}\ |
73 | %{mmc:-AMC}%{mca:-ACA}%{mcc:-ACC}%{mcf:-ACF}\ | |
74 | %{!mka:%{!mkb:%{!msa:%{!msb:%{!mmc:%{!mca:%{!mcc:%{!mcf:-AKB}}}}}}}}\ | |
75 | %{mbout:-Fbout}%{mcoff:-Fcoff}\ | |
76 | %{mlink-relax:-relax}" | |
ba8ab355 JW |
77 | |
78 | /* Specs for the libraries to link with, to handle processor variations. | |
79 | Compatible with Intel's gnu960 tool chain. */ | |
80 | #define LIB_SPEC "%{!nostdlib:-lcg %{p:-lprof}%{pg:-lgprof}\ | |
81 | %{mka:-lfpg}%{msa:-lfpg}%{mca:-lfpg}%{mcf:-lfpg} -lgnu}" | |
82 | ||
ba8ab355 JW |
83 | /* Omit frame pointer at -O2. Inline functions at -O3. */ |
84 | #define OPTIMIZATION_OPTIONS(LEVEL) \ | |
85 | { \ | |
86 | if ((LEVEL) >= 2) \ | |
87 | { \ | |
88 | flag_omit_frame_pointer = 1; \ | |
89 | target_flags |= TARGET_FLAG_LEAFPROC; \ | |
90 | target_flags |= TARGET_FLAG_TAILCALL; \ | |
91 | } \ | |
ba8ab355 JW |
92 | } |
93 | ||
94 | /* Print subsidiary information on the compiler version in use. */ | |
95 | #define TARGET_VERSION fprintf (stderr," (intel 80960)"); | |
96 | ||
97 | /* Generate DBX debugging information. */ | |
98 | #define DBX_DEBUGGING_INFO | |
99 | ||
100 | /* Generate SDB style debugging information. */ | |
101 | #define SDB_DEBUGGING_INFO | |
102 | ||
103 | /* Generate DBX_DEBUGGING_INFO by default. */ | |
104 | #define PREFERRED_DEBUGGING_TYPE DBX_DEBUG | |
105 | ||
106 | /* Redefine this to print in hex like iC960. */ | |
107 | #define PUT_SDB_TYPE(A) fprintf (asm_out_file, "\t.type\t0x%x;", A) | |
108 | ||
109 | /* Run-time compilation parameters selecting different hardware subsets. */ | |
110 | ||
111 | /* 960 architecture with floating-point. */ | |
112 | #define TARGET_FLAG_NUMERICS 0x01 | |
113 | #define TARGET_NUMERICS (target_flags & TARGET_FLAG_NUMERICS) | |
114 | ||
115 | /* 960 architecture with memory management. */ | |
116 | /* ??? Not used currently. */ | |
117 | #define TARGET_FLAG_PROTECTED 0x02 | |
118 | #define TARGET_PROTECTED (target_flags & TARGET_FLAG_PROTECTED) | |
119 | ||
120 | /* The following three are mainly used to provide a little sanity checking | |
121 | against the -mARCH flags given. */ | |
122 | ||
123 | /* Nonzero if we should generate code for the KA and similar processors. | |
124 | No FPU, no microcode instructions. */ | |
125 | #define TARGET_FLAG_K_SERIES 0x04 | |
126 | #define TARGET_K_SERIES (target_flags & TARGET_FLAG_K_SERIES) | |
127 | ||
128 | /* Nonzero if we should generate code for the MC processor. | |
129 | Not really different from KB for our purposes. */ | |
130 | #define TARGET_FLAG_MC 0x08 | |
131 | #define TARGET_MC (target_flags & TARGET_FLAG_MC) | |
132 | ||
133 | /* Nonzero if we should generate code for the CA processor. | |
134 | Enables different optimization strategies. */ | |
135 | #define TARGET_FLAG_C_SERIES 0x10 | |
136 | #define TARGET_C_SERIES (target_flags & TARGET_FLAG_C_SERIES) | |
137 | ||
138 | /* Nonzero if we should generate leaf-procedures when we find them. | |
139 | You may not want to do this because leaf-proc entries are | |
140 | slower when not entered via BAL - this would be true when | |
141 | a linker not supporting the optimization is used. */ | |
142 | #define TARGET_FLAG_LEAFPROC 0x20 | |
143 | #define TARGET_LEAFPROC (target_flags & TARGET_FLAG_LEAFPROC) | |
144 | ||
145 | /* Nonzero if we should perform tail-call optimizations when we find them. | |
146 | You may not want to do this because the detection of cases where | |
147 | this is not valid is not totally complete. */ | |
148 | #define TARGET_FLAG_TAILCALL 0x40 | |
149 | #define TARGET_TAILCALL (target_flags & TARGET_FLAG_TAILCALL) | |
150 | ||
151 | /* Nonzero if use of a complex addressing mode is a win on this implementation. | |
152 | Complex addressing modes are probably not worthwhile on the K-series, | |
153 | but they definitely are on the C-series. */ | |
154 | #define TARGET_FLAG_COMPLEX_ADDR 0x80 | |
155 | #define TARGET_COMPLEX_ADDR (target_flags & TARGET_FLAG_COMPLEX_ADDR) | |
156 | ||
157 | /* Align code to 8 byte boundaries for faster fetching. */ | |
158 | #define TARGET_FLAG_CODE_ALIGN 0x100 | |
159 | #define TARGET_CODE_ALIGN (target_flags & TARGET_FLAG_CODE_ALIGN) | |
160 | ||
161 | /* Append branch prediction suffixes to branch opcodes. */ | |
162 | /* ??? Not used currently. */ | |
163 | #define TARGET_FLAG_BRANCH_PREDICT 0x200 | |
164 | #define TARGET_BRANCH_PREDICT (target_flags & TARGET_FLAG_BRANCH_PREDICT) | |
165 | ||
166 | /* Forces prototype and return promotions. */ | |
167 | /* ??? This does not work. */ | |
168 | #define TARGET_FLAG_CLEAN_LINKAGE 0x400 | |
169 | #define TARGET_CLEAN_LINKAGE (target_flags & TARGET_FLAG_CLEAN_LINKAGE) | |
170 | ||
171 | /* For compatibility with iC960 v3.0. */ | |
172 | #define TARGET_FLAG_IC_COMPAT3_0 0x800 | |
173 | #define TARGET_IC_COMPAT3_0 (target_flags & TARGET_FLAG_IC_COMPAT3_0) | |
174 | ||
175 | /* For compatibility with iC960 v2.0. */ | |
176 | #define TARGET_FLAG_IC_COMPAT2_0 0x1000 | |
177 | #define TARGET_IC_COMPAT2_0 (target_flags & TARGET_FLAG_IC_COMPAT2_0) | |
178 | ||
179 | /* If no unaligned accesses are to be permitted. */ | |
180 | #define TARGET_FLAG_STRICT_ALIGN 0x2000 | |
181 | #define TARGET_STRICT_ALIGN (target_flags & TARGET_FLAG_STRICT_ALIGN) | |
182 | ||
183 | /* For compatibility with iC960 assembler. */ | |
184 | #define TARGET_FLAG_ASM_COMPAT 0x4000 | |
185 | #define TARGET_ASM_COMPAT (target_flags & TARGET_FLAG_ASM_COMPAT) | |
186 | ||
187 | /* For compatibility with the gcc960 v1.2 compiler. Use the old structure | |
13d39dbc | 188 | alignment rules. Also, turns on STRICT_ALIGNMENT. */ |
ba8ab355 JW |
189 | #define TARGET_FLAG_OLD_ALIGN 0x8000 |
190 | #define TARGET_OLD_ALIGN (target_flags & TARGET_FLAG_OLD_ALIGN) | |
191 | ||
192 | extern int target_flags; | |
193 | ||
194 | /* Macro to define tables used to set the flags. | |
195 | This is a list in braces of pairs in braces, | |
196 | each pair being { "NAME", VALUE } | |
197 | where VALUE is the bits to set or minus the bits to clear. | |
198 | An empty string NAME is used to identify the default VALUE. */ | |
199 | ||
200 | /* ??? Not all ten of these architecture variations actually exist, but I | |
201 | am not sure which are real and which aren't. */ | |
202 | ||
203 | #define TARGET_SWITCHES \ | |
204 | { {"sa", (TARGET_FLAG_K_SERIES|TARGET_FLAG_COMPLEX_ADDR)},\ | |
205 | {"sb", (TARGET_FLAG_NUMERICS|TARGET_FLAG_K_SERIES| \ | |
206 | TARGET_FLAG_COMPLEX_ADDR)},\ | |
c3eebffb JW |
207 | /* {"sc", (TARGET_FLAG_NUMERICS|TARGET_FLAG_PROTECTED|\ |
208 | TARGET_FLAG_MC|TARGET_FLAG_COMPLEX_ADDR)},*/ \ | |
ba8ab355 JW |
209 | {"ka", (TARGET_FLAG_K_SERIES|TARGET_FLAG_COMPLEX_ADDR)},\ |
210 | {"kb", (TARGET_FLAG_NUMERICS|TARGET_FLAG_K_SERIES| \ | |
211 | TARGET_FLAG_COMPLEX_ADDR)},\ | |
c3eebffb JW |
212 | /* {"kc", (TARGET_FLAG_NUMERICS|TARGET_FLAG_PROTECTED|\ |
213 | TARGET_FLAG_MC|TARGET_FLAG_COMPLEX_ADDR)},*/ \ | |
ba8ab355 JW |
214 | {"mc", (TARGET_FLAG_NUMERICS|TARGET_FLAG_PROTECTED|\ |
215 | TARGET_FLAG_MC|TARGET_FLAG_COMPLEX_ADDR)},\ | |
216 | {"ca", (TARGET_FLAG_C_SERIES|TARGET_FLAG_BRANCH_PREDICT|\ | |
217 | TARGET_FLAG_CODE_ALIGN|TARGET_FLAG_COMPLEX_ADDR)},\ | |
c3eebffb | 218 | /* {"cb", (TARGET_FLAG_NUMERICS|TARGET_FLAG_C_SERIES|\ |
ba8ab355 JW |
219 | TARGET_FLAG_BRANCH_PREDICT|TARGET_FLAG_CODE_ALIGN)},\ |
220 | {"cc", (TARGET_FLAG_NUMERICS|TARGET_FLAG_PROTECTED|\ | |
221 | TARGET_FLAG_C_SERIES|TARGET_FLAG_BRANCH_PREDICT|\ | |
c3eebffb | 222 | TARGET_FLAG_CODE_ALIGN)}, */ \ |
ba8ab355 JW |
223 | {"cf", (TARGET_FLAG_C_SERIES|TARGET_FLAG_BRANCH_PREDICT|\ |
224 | TARGET_FLAG_CODE_ALIGN|TARGET_FLAG_COMPLEX_ADDR)},\ | |
225 | {"numerics", (TARGET_FLAG_NUMERICS)}, \ | |
226 | {"soft-float", -(TARGET_FLAG_NUMERICS)}, \ | |
227 | {"leaf-procedures", TARGET_FLAG_LEAFPROC}, \ | |
228 | {"no-leaf-procedures",-(TARGET_FLAG_LEAFPROC)}, \ | |
229 | {"tail-call",TARGET_FLAG_TAILCALL}, \ | |
230 | {"no-tail-call",-(TARGET_FLAG_TAILCALL)}, \ | |
231 | {"complex-addr",TARGET_FLAG_COMPLEX_ADDR}, \ | |
232 | {"no-complex-addr",-(TARGET_FLAG_COMPLEX_ADDR)}, \ | |
233 | {"code-align",TARGET_FLAG_CODE_ALIGN}, \ | |
234 | {"no-code-align",-(TARGET_FLAG_CODE_ALIGN)}, \ | |
235 | {"clean-linkage", (TARGET_FLAG_CLEAN_LINKAGE)}, \ | |
236 | {"no-clean-linkage", -(TARGET_FLAG_CLEAN_LINKAGE)}, \ | |
237 | {"ic-compat", TARGET_FLAG_IC_COMPAT2_0}, \ | |
238 | {"ic2.0-compat", TARGET_FLAG_IC_COMPAT2_0}, \ | |
239 | {"ic3.0-compat", TARGET_FLAG_IC_COMPAT3_0}, \ | |
240 | {"asm-compat",TARGET_FLAG_ASM_COMPAT}, \ | |
241 | {"intel-asm",TARGET_FLAG_ASM_COMPAT}, \ | |
242 | {"strict-align", TARGET_FLAG_STRICT_ALIGN}, \ | |
243 | {"no-strict-align", -(TARGET_FLAG_STRICT_ALIGN)}, \ | |
244 | {"old-align", TARGET_FLAG_OLD_ALIGN}, \ | |
245 | {"no-old-align", -(TARGET_FLAG_OLD_ALIGN)}, \ | |
c3eebffb JW |
246 | {"link-relax", 0}, \ |
247 | {"no-link-relax", 0}, \ | |
ba8ab355 JW |
248 | { "", TARGET_DEFAULT}} |
249 | ||
250 | /* Override conflicting target switch options. | |
251 | Doesn't actually detect if more than one -mARCH option is given, but | |
252 | does handle the case of two blatantly conflicting -mARCH options. */ | |
253 | #define OVERRIDE_OPTIONS \ | |
254 | { \ | |
255 | if (TARGET_K_SERIES && TARGET_C_SERIES) \ | |
256 | { \ | |
257 | warning ("conflicting architectures defined - using C series", 0); \ | |
258 | target_flags &= ~TARGET_FLAG_K_SERIES; \ | |
259 | } \ | |
260 | if (TARGET_K_SERIES && TARGET_MC) \ | |
261 | { \ | |
262 | warning ("conflicting architectures defined - using K series", 0); \ | |
263 | target_flags &= ~TARGET_FLAG_MC; \ | |
264 | } \ | |
265 | if (TARGET_C_SERIES && TARGET_MC) \ | |
266 | { \ | |
267 | warning ("conflicting architectures defined - using C series", 0);\ | |
268 | target_flags &= ~TARGET_FLAG_MC; \ | |
269 | } \ | |
270 | if (TARGET_IC_COMPAT3_0) \ | |
271 | { \ | |
272 | flag_short_enums = 1; \ | |
273 | flag_signed_char = 1; \ | |
274 | target_flags |= TARGET_FLAG_CLEAN_LINKAGE; \ | |
275 | if (TARGET_IC_COMPAT2_0) \ | |
276 | { \ | |
277 | warning ("iC2.0 and iC3.0 are incompatible - using iC3.0", 0); \ | |
278 | target_flags &= ~TARGET_FLAG_IC_COMPAT2_0; \ | |
279 | } \ | |
280 | } \ | |
281 | if (TARGET_IC_COMPAT2_0) \ | |
282 | { \ | |
283 | flag_signed_char = 1; \ | |
284 | target_flags |= TARGET_FLAG_CLEAN_LINKAGE; \ | |
285 | } \ | |
286 | i960_initialize (); \ | |
287 | } | |
288 | ||
289 | /* Don't enable anything by default. The user is expected to supply a -mARCH | |
290 | option. If none is given, then -mkb is added by CC1_SPEC. */ | |
291 | #define TARGET_DEFAULT 0 | |
292 | \f | |
293 | /* Target machine storage layout. */ | |
294 | ||
295 | /* Define this if most significant bit is lowest numbered | |
296 | in instructions that operate on numbered bit-fields. */ | |
297 | #define BITS_BIG_ENDIAN 0 | |
298 | ||
299 | /* Define this if most significant byte of a word is the lowest numbered. | |
300 | The i960 case be either big endian or little endian. We only support | |
301 | little endian, which is the most common. */ | |
302 | #define BYTES_BIG_ENDIAN 0 | |
303 | ||
304 | /* Define this if most significant word of a multiword number is lowest | |
305 | numbered. */ | |
306 | #define WORDS_BIG_ENDIAN 0 | |
307 | ||
c3eebffb | 308 | /* Number of bits in an addressable storage unit. */ |
ba8ab355 JW |
309 | #define BITS_PER_UNIT 8 |
310 | ||
311 | /* Bitfields cannot cross word boundaries. */ | |
312 | #define BITFIELD_NBYTES_LIMITED 1 | |
313 | ||
314 | /* Width in bits of a "word", which is the contents of a machine register. | |
315 | Note that this is not necessarily the width of data type `int'; | |
316 | if using 16-bit ints on a 68000, this would still be 32. | |
317 | But on a machine with 16-bit registers, this would be 16. */ | |
318 | #define BITS_PER_WORD 32 | |
319 | ||
320 | /* Width of a word, in units (bytes). */ | |
321 | #define UNITS_PER_WORD 4 | |
322 | ||
323 | /* Width in bits of a pointer. See also the macro `Pmode' defined below. */ | |
324 | #define POINTER_SIZE 32 | |
325 | ||
326 | /* Width in bits of a long double. Identical to double for now. */ | |
327 | #define LONG_DOUBLE_TYPE_SIZE 64 | |
328 | ||
329 | /* Allocation boundary (in *bits*) for storing pointers in memory. */ | |
330 | #define POINTER_BOUNDARY 32 | |
331 | ||
332 | /* Allocation boundary (in *bits*) for storing arguments in argument list. */ | |
333 | #define PARM_BOUNDARY 32 | |
334 | ||
335 | /* Boundary (in *bits*) on which stack pointer should be aligned. */ | |
336 | #define STACK_BOUNDARY 128 | |
337 | ||
338 | /* Allocation boundary (in *bits*) for the code of a function. */ | |
339 | #define FUNCTION_BOUNDARY 128 | |
340 | ||
341 | /* Alignment of field after `int : 0' in a structure. */ | |
342 | #define EMPTY_FIELD_BOUNDARY 32 | |
343 | ||
344 | /* This makes zero-length anonymous fields lay the next field | |
345 | at a word boundary. It also makes the whole struct have | |
346 | at least word alignment if there are any bitfields at all. */ | |
347 | #define PCC_BITFIELD_TYPE_MATTERS 1 | |
348 | ||
349 | /* Every structure's size must be a multiple of this. */ | |
350 | #define STRUCTURE_SIZE_BOUNDARY 8 | |
351 | ||
352 | /* No data type wants to be aligned rounder than this. | |
353 | Extended precision floats gets 4-word alignment. */ | |
354 | #define BIGGEST_ALIGNMENT 128 | |
355 | ||
356 | /* Define this if move instructions will actually fail to work | |
357 | when given unaligned data. | |
358 | 80960 will work even with unaligned data, but it is slow. */ | |
359 | #define STRICT_ALIGNMENT TARGET_OLD_ALIGN | |
360 | ||
361 | /* Specify alignment for string literals (which might be higher than the | |
13d39dbc | 362 | base type's minimal alignment requirement. This allows strings to be |
ba8ab355 JW |
363 | aligned on word boundaries, and optimizes calls to the str* and mem* |
364 | library functions. */ | |
365 | #define CONSTANT_ALIGNMENT(EXP, ALIGN) \ | |
366 | (i960_object_bytes_bitalign (int_size_in_bytes (TREE_TYPE (EXP))) > (ALIGN) \ | |
367 | ? i960_object_bytes_bitalign (int_size_in_bytes (TREE_TYPE (EXP))) \ | |
368 | : (ALIGN)) | |
369 | ||
370 | /* Macros to determine size of aggregates (structures and unions | |
371 | in C). Normally, these may be defined to simply return the maximum | |
372 | alignment and simple rounded-up size, but on some machines (like | |
373 | the i960), the total size of a structure is based on a non-trivial | |
374 | rounding method. */ | |
375 | ||
376 | #define ROUND_TYPE_ALIGN(TYPE, COMPUTED, SPECIFIED) \ | |
377 | ((!TARGET_OLD_ALIGN && TREE_CODE (TYPE) == RECORD_TYPE) \ | |
378 | ? i960_round_align ((SPECIFIED), TYPE_SIZE (TYPE)) \ | |
379 | : MAX ((COMPUTED), (SPECIFIED))) | |
380 | ||
381 | #define ROUND_TYPE_SIZE(TYPE, SIZE, ALIGN) \ | |
382 | ((!TARGET_OLD_ALIGN && TREE_CODE (TYPE) == RECORD_TYPE) \ | |
383 | ? (tree) i960_round_size (SIZE) \ | |
384 | : round_up ((SIZE), (ALIGN))) | |
385 | \f | |
386 | /* Standard register usage. */ | |
387 | ||
388 | /* Number of actual hardware registers. | |
389 | The hardware registers are assigned numbers for the compiler | |
390 | from 0 to just below FIRST_PSEUDO_REGISTER. | |
391 | All registers that the compiler knows about must be given numbers, | |
392 | even those that are not normally considered general registers. | |
393 | ||
394 | Registers 0-15 are the global registers (g0-g15). | |
395 | Registers 16-31 are the local registers (r0-r15). | |
396 | Register 32-35 are the fp registers (fp0-fp3). | |
397 | Register 36 is the condition code register. | |
398 | Register 37 is unused. */ | |
399 | ||
400 | #define FIRST_PSEUDO_REGISTER 38 | |
401 | ||
402 | /* 1 for registers that have pervasive standard uses and are not available | |
403 | for the register allocator. On 80960, this includes the frame pointer | |
404 | (g15), the previous FP (r0), the stack pointer (r1), the return | |
405 | instruction pointer (r2), and the argument pointer (g14). */ | |
406 | #define FIXED_REGISTERS \ | |
407 | {0, 0, 0, 0, 0, 0, 0, 0, \ | |
408 | 0, 0, 0, 0, 0, 0, 1, 1, \ | |
409 | 1, 1, 1, 0, 0, 0, 0, 0, \ | |
410 | 0, 0, 0, 0, 0, 0, 0, 0, \ | |
411 | 0, 0, 0, 0, 1, 1} | |
412 | ||
413 | /* 1 for registers not available across function calls. | |
414 | These must include the FIXED_REGISTERS and also any | |
415 | registers that can be used without being saved. | |
416 | The latter must include the registers where values are returned | |
417 | and the register where structure-value addresses are passed. | |
418 | Aside from that, you can include as many other registers as you like. */ | |
419 | ||
420 | /* On the 80960, note that: | |
421 | g0..g3 are used for return values, | |
422 | g0..g7 may always be used for parameters, | |
423 | g8..g11 may be used for parameters, but are preserved if they aren't, | |
424 | g12 is always preserved, but otherwise unused, | |
425 | g13 is the struct return ptr if used, or temp, but may be trashed, | |
426 | g14 is the leaf return ptr or the arg block ptr otherwise zero, | |
427 | must be reset to zero before returning if it was used, | |
428 | g15 is the frame pointer, | |
429 | r0 is the previous FP, | |
430 | r1 is the stack pointer, | |
431 | r2 is the return instruction pointer, | |
432 | r3-r15 are always available, | |
433 | fp0..fp3 are never available. */ | |
434 | #define CALL_USED_REGISTERS \ | |
435 | {1, 1, 1, 1, 1, 1, 1, 1, \ | |
436 | 0, 0, 0, 0, 0, 1, 1, 1, \ | |
437 | 1, 1, 1, 0, 0, 0, 0, 0, \ | |
438 | 0, 0, 0, 0, 0, 0, 0, 0, \ | |
439 | 1, 1, 1, 1, 1, 1} | |
440 | ||
441 | /* If no fp unit, make all of the fp registers fixed so that they can't | |
442 | be used. */ | |
443 | #define CONDITIONAL_REGISTER_USAGE \ | |
444 | if (! TARGET_NUMERICS) { \ | |
445 | fixed_regs[32] = fixed_regs[33] = fixed_regs[34] = fixed_regs[35] = 1;\ | |
446 | } \ | |
447 | ||
448 | /* Return number of consecutive hard regs needed starting at reg REGNO | |
449 | to hold something of mode MODE. | |
450 | This is ordinarily the length in words of a value of mode MODE | |
451 | but can be less for certain modes in special long registers. | |
452 | ||
453 | On 80960, ordinary registers hold 32 bits worth, but can be ganged | |
454 | together to hold double or extended precision floating point numbers, | |
455 | and the floating point registers hold any size floating point number */ | |
456 | #define HARD_REGNO_NREGS(REGNO, MODE) \ | |
457 | ((REGNO) < 32 \ | |
458 | ? (((MODE) == VOIDmode) \ | |
459 | ? 1 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)) \ | |
460 | : ((REGNO) < FIRST_PSEUDO_REGISTER) ? 1 : 0) | |
461 | ||
462 | /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE. | |
463 | On 80960, the cpu registers can hold any mode but the float registers | |
464 | can only hold SFmode, DFmode, or TFmode. */ | |
17704846 | 465 | extern unsigned int hard_regno_mode_ok[FIRST_PSEUDO_REGISTER]; |
ba8ab355 JW |
466 | #define HARD_REGNO_MODE_OK(REGNO, MODE) \ |
467 | ((hard_regno_mode_ok[REGNO] & (1 << (int) (MODE))) != 0) | |
468 | ||
469 | /* Value is 1 if it is a good idea to tie two pseudo registers | |
470 | when one has mode MODE1 and one has mode MODE2. | |
471 | If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2, | |
472 | for any hard reg, then this must be 0 for correct output. */ | |
473 | ||
474 | #define MODES_TIEABLE_P(MODE1, MODE2) \ | |
475 | ((MODE1) == (MODE2) || GET_MODE_CLASS (MODE1) == GET_MODE_CLASS (MODE2)) | |
476 | ||
477 | /* Specify the registers used for certain standard purposes. | |
478 | The values of these macros are register numbers. */ | |
479 | ||
480 | /* 80960 pc isn't overloaded on a register that the compiler knows about. */ | |
481 | /* #define PC_REGNUM */ | |
482 | ||
483 | /* Register to use for pushing function arguments. */ | |
484 | #define STACK_POINTER_REGNUM 17 | |
485 | ||
486 | /* Actual top-of-stack address is same as | |
487 | the contents of the stack pointer register. */ | |
488 | #define STACK_POINTER_OFFSET (-current_function_outgoing_args_size) | |
489 | ||
490 | /* Base register for access to local variables of the function. */ | |
491 | #define FRAME_POINTER_REGNUM 15 | |
492 | ||
493 | /* Value should be nonzero if functions must have frame pointers. | |
494 | Zero means the frame pointer need not be set up (and parms | |
495 | may be accessed via the stack pointer) in functions that seem suitable. | |
496 | This is computed in `reload', in reload1.c. */ | |
497 | #define FRAME_POINTER_REQUIRED (! leaf_function_p ()) | |
498 | ||
499 | /* C statement to store the difference between the frame pointer | |
500 | and the stack pointer values immediately after the function prologue. */ | |
501 | ||
502 | #define INITIAL_FRAME_POINTER_OFFSET(VAR) \ | |
503 | do { (VAR) = compute_frame_size (get_frame_size ()); } while (0) | |
504 | ||
505 | /* Base register for access to arguments of the function. */ | |
506 | #define ARG_POINTER_REGNUM 14 | |
507 | ||
508 | /* Register in which static-chain is passed to a function. | |
509 | On i960, we use r3. */ | |
510 | #define STATIC_CHAIN_REGNUM 19 | |
511 | ||
512 | /* Functions which return large structures get the address | |
513 | to place the wanted value at in g13. */ | |
514 | ||
515 | #define STRUCT_VALUE_REGNUM 13 | |
516 | ||
517 | /* The order in which to allocate registers. */ | |
518 | ||
519 | #define REG_ALLOC_ORDER \ | |
520 | { 4, 5, 6, 7, 0, 1, 2, 3, 13, /* g4, g5, g6, g7, g0, g1, g2, g3, g13 */ \ | |
521 | 20, 21, 22, 23, 24, 25, 26, 27,/* r4, r5, r6, r7, r8, r9, r10, r11 */ \ | |
522 | 28, 29, 30, 31, 19, 8, 9, 10, /* r12, r13, r14, r15, r3, g8, g9, g10 */ \ | |
523 | 11, 12, /* g11, g12 */ \ | |
524 | 32, 33, 34, 35, /* fp0, fp1, fp2, fp3 */ \ | |
525 | /* We can't actually allocate these. */ \ | |
526 | 16, 17, 18, 14, 15, 36, 37} /* r0, r1, r2, g14, g15, cc */ | |
527 | \f | |
528 | /* Define the classes of registers for register constraints in the | |
529 | machine description. Also define ranges of constants. | |
530 | ||
531 | One of the classes must always be named ALL_REGS and include all hard regs. | |
532 | If there is more than one class, another class must be named NO_REGS | |
533 | and contain no registers. | |
534 | ||
535 | The name GENERAL_REGS must be the name of a class (or an alias for | |
536 | another name such as ALL_REGS). This is the class of registers | |
537 | that is allowed by "g" or "r" in a register constraint. | |
538 | Also, registers outside this class are allocated only when | |
539 | instructions express preferences for them. | |
540 | ||
541 | The classes must be numbered in nondecreasing order; that is, | |
542 | a larger-numbered class must never be contained completely | |
543 | in a smaller-numbered class. | |
544 | ||
545 | For any two classes, it is very desirable that there be another | |
546 | class that represents their union. */ | |
547 | ||
548 | /* The 80960 has four kinds of registers, global, local, floating point, | |
549 | and condition code. The cc register is never allocated, so no class | |
550 | needs to be defined for it. */ | |
551 | ||
552 | enum reg_class { NO_REGS, GLOBAL_REGS, LOCAL_REGS, LOCAL_OR_GLOBAL_REGS, | |
553 | FP_REGS, ALL_REGS, LIM_REG_CLASSES }; | |
554 | ||
555 | /* 'r' includes floating point registers if TARGET_NUMERICS. 'd' never | |
556 | does. */ | |
557 | #define GENERAL_REGS ((TARGET_NUMERICS) ? ALL_REGS : LOCAL_OR_GLOBAL_REGS) | |
558 | ||
559 | #define N_REG_CLASSES (int) LIM_REG_CLASSES | |
560 | ||
561 | /* Give names of register classes as strings for dump file. */ | |
562 | ||
563 | #define REG_CLASS_NAMES \ | |
564 | { "NO_REGS", "GLOBAL_REGS", "LOCAL_REGS", "LOCAL_OR_GLOBAL_REGS", \ | |
565 | "FP_REGS", "ALL_REGS" } | |
566 | ||
567 | /* Define which registers fit in which classes. | |
568 | This is an initializer for a vector of HARD_REG_SET | |
569 | of length N_REG_CLASSES. */ | |
570 | ||
571 | #define REG_CLASS_CONTENTS \ | |
572 | { {0, 0}, {0x0ffff, 0}, {0xffff0000, 0}, {-1,0}, {0, -1}, {-1,-1}} | |
573 | ||
574 | /* The same information, inverted: | |
575 | Return the class number of the smallest class containing | |
576 | reg number REGNO. This could be a conditional expression | |
577 | or could index an array. */ | |
578 | ||
579 | #define REGNO_REG_CLASS(REGNO) \ | |
580 | ((REGNO) < 16 ? GLOBAL_REGS \ | |
581 | : (REGNO) < 32 ? LOCAL_REGS \ | |
582 | : (REGNO) < 36 ? FP_REGS \ | |
583 | : NO_REGS) | |
584 | ||
585 | /* The class value for index registers, and the one for base regs. | |
586 | There is currently no difference between base and index registers on the | |
587 | i960, but this distinction may one day be useful. */ | |
588 | #define INDEX_REG_CLASS LOCAL_OR_GLOBAL_REGS | |
589 | #define BASE_REG_CLASS LOCAL_OR_GLOBAL_REGS | |
590 | ||
591 | /* Get reg_class from a letter such as appears in the machine description. | |
592 | 'f' is a floating point register (fp0..fp3) | |
593 | 'l' is a local register (r0-r15) | |
594 | 'b' is a global register (g0-g15) | |
595 | 'd' is any local or global register | |
596 | 'r' or 'g' are pre-defined to the class GENERAL_REGS. */ | |
597 | /* 'l' and 'b' are probably never used. Note that 'd' and 'r' are *not* | |
598 | the same thing, since 'r' may include the fp registers. */ | |
599 | #define REG_CLASS_FROM_LETTER(C) \ | |
600 | (((C) == 'f') && (TARGET_NUMERICS) ? FP_REGS : ((C) == 'l' ? LOCAL_REGS : \ | |
601 | (C) == 'b' ? GLOBAL_REGS : ((C) == 'd' ? LOCAL_OR_GLOBAL_REGS : NO_REGS))) | |
602 | ||
603 | /* The letters I, J, K, L and M in a register constraint string | |
604 | can be used to stand for particular ranges of immediate operands. | |
605 | This macro defines what the ranges are. | |
606 | C is the letter, and VALUE is a constant value. | |
607 | Return 1 if VALUE is in the range specified by C. | |
608 | ||
609 | For 80960: | |
610 | 'I' is used for literal values 0..31 | |
611 | 'J' means literal 0 | |
612 | 'K' means 0..-31. */ | |
613 | ||
614 | #define CONST_OK_FOR_LETTER_P(VALUE, C) \ | |
615 | ((C) == 'I' ? (((unsigned) (VALUE)) <= 31) \ | |
616 | : (C) == 'J' ? ((VALUE) == 0) \ | |
617 | : (C) == 'K' ? ((VALUE) > -32 && (VALUE) <= 0) \ | |
618 | : 0) | |
619 | ||
620 | /* Similar, but for floating constants, and defining letters G and H. | |
621 | Here VALUE is the CONST_DOUBLE rtx itself. | |
622 | For the 80960, G is 0.0 and H is 1.0. */ | |
623 | ||
624 | #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \ | |
625 | ((TARGET_NUMERICS) && \ | |
626 | (((C) == 'G' && ((VALUE) == CONST0_RTX (DFmode) \ | |
627 | || (VALUE) == CONST0_RTX (SFmode))) \ | |
628 | || ((C) == 'H' && ((VALUE) == CONST1_RTX (DFmode) \ | |
629 | || (VALUE) == CONST1_RTX (SFmode))))) | |
630 | ||
631 | /* Given an rtx X being reloaded into a reg required to be | |
632 | in class CLASS, return the class of reg to actually use. | |
633 | In general this is just CLASS; but on some machines | |
634 | in some cases it is preferable to use a more restrictive class. */ | |
635 | ||
636 | /* On 960, can't load constant into floating-point reg except | |
637 | 0.0 or 1.0. | |
638 | ||
639 | Any hard reg is ok as a src operand of a reload insn. */ | |
640 | ||
641 | #define PREFERRED_RELOAD_CLASS(X,CLASS) \ | |
642 | (GET_CODE (X) == REG && REGNO (X) < FIRST_PSEUDO_REGISTER \ | |
643 | ? (CLASS) \ | |
644 | : ((CLASS) == FP_REGS && CONSTANT_P (X) \ | |
645 | && (X) != CONST0_RTX (DFmode) && (X) != CONST1_RTX (DFmode)\ | |
646 | && (X) != CONST0_RTX (SFmode) && (X) != CONST1_RTX (SFmode)\ | |
647 | ? NO_REGS \ | |
648 | : (CLASS) == ALL_REGS ? LOCAL_OR_GLOBAL_REGS : (CLASS))) | |
649 | ||
650 | #define SECONDARY_RELOAD_CLASS(CLASS,MODE,IN) \ | |
651 | secondary_reload_class (CLASS, MODE, IN) | |
652 | ||
653 | /* Return the maximum number of consecutive registers | |
654 | needed to represent mode MODE in a register of class CLASS. */ | |
655 | /* On 80960, this is the size of MODE in words, | |
656 | except in the FP regs, where a single reg is always enough. */ | |
657 | #define CLASS_MAX_NREGS(CLASS, MODE) \ | |
658 | ((CLASS) == FP_REGS ? 1 : HARD_REGNO_NREGS (0, (MODE))) | |
659 | \f | |
660 | /* Stack layout; function entry, exit and calling. */ | |
661 | ||
662 | /* Define this if pushing a word on the stack | |
663 | makes the stack pointer a smaller address. */ | |
664 | /* #define STACK_GROWS_DOWNWARD */ | |
665 | ||
666 | /* Define this if the nominal address of the stack frame | |
667 | is at the high-address end of the local variables; | |
668 | that is, each additional local variable allocated | |
669 | goes at a more negative offset in the frame. */ | |
670 | /* #define FRAME_GROWS_DOWNWARD */ | |
671 | ||
672 | /* Offset within stack frame to start allocating local variables at. | |
673 | If FRAME_GROWS_DOWNWARD, this is the offset to the END of the | |
674 | first local allocated. Otherwise, it is the offset to the BEGINNING | |
675 | of the first local allocated. | |
676 | ||
677 | The i960 has a 64 byte register save area, plus possibly some extra | |
678 | bytes allocated for varargs functions. */ | |
679 | #define STARTING_FRAME_OFFSET 64 | |
680 | ||
681 | /* If we generate an insn to push BYTES bytes, | |
682 | this says how many the stack pointer really advances by. | |
683 | On 80960, don't define this because there are no push insns. */ | |
684 | /* #define PUSH_ROUNDING(BYTES) BYTES */ | |
685 | ||
686 | /* Offset of first parameter from the argument pointer register value. */ | |
687 | #define FIRST_PARM_OFFSET(FNDECL) 0 | |
688 | ||
689 | /* When a parameter is passed in a register, no stack space is | |
690 | allocated for it. However, when args are passed in the | |
691 | stack, space is allocated for every register parameter. */ | |
692 | #define MAYBE_REG_PARM_STACK_SPACE 48 | |
693 | #define FINAL_REG_PARM_STACK_SPACE(CONST_SIZE, VAR_SIZE) \ | |
694 | i960_final_reg_parm_stack_space (CONST_SIZE, VAR_SIZE); | |
695 | #define REG_PARM_STACK_SPACE(DECL) i960_reg_parm_stack_space (DECL) | |
696 | #define OUTGOING_REG_PARM_STACK_SPACE | |
697 | ||
698 | /* Keep the stack pointer constant throughout the function. */ | |
699 | #define ACCUMULATE_OUTGOING_ARGS | |
700 | ||
701 | /* Value is 1 if returning from a function call automatically | |
702 | pops the arguments described by the number-of-args field in the call. | |
703 | FUNTYPE is the data type of the function (as a tree), | |
704 | or for a library call it is an identifier node for the subroutine name. */ | |
705 | ||
706 | #define RETURN_POPS_ARGS(FUNTYPE, SIZE) 0 | |
707 | ||
708 | /* Define how to find the value returned by a library function | |
709 | assuming the value has mode MODE. */ | |
710 | ||
711 | #define LIBCALL_VALUE(MODE) gen_rtx ((REG), (MODE), 0) | |
712 | ||
713 | /* 1 if N is a possible register number for a function value | |
714 | as seen by the caller. | |
715 | On 80960, returns are in g0..g3 */ | |
716 | ||
717 | #define FUNCTION_VALUE_REGNO_P(N) ((N) < 4) | |
718 | ||
719 | /* 1 if N is a possible register number for function argument passing. | |
720 | On 80960, parameters are passed in g0..g11 */ | |
721 | ||
722 | #define FUNCTION_ARG_REGNO_P(N) ((N) < 12) | |
723 | ||
724 | /* Perform any needed actions needed for a function that is receiving a | |
725 | variable number of arguments. | |
726 | ||
727 | CUM is as above. | |
728 | ||
729 | MODE and TYPE are the mode and type of the current parameter. | |
730 | ||
731 | PRETEND_SIZE is a variable that should be set to the amount of stack | |
732 | that must be pushed by the prolog to pretend that our caller pushed | |
733 | it. | |
734 | ||
735 | Normally, this macro will push all remaining incoming registers on the | |
736 | stack and set PRETEND_SIZE to the length of the registers pushed. */ | |
737 | ||
738 | #define SETUP_INCOMING_VARARGS(CUM,MODE,TYPE,PRETEND_SIZE,NO_RTL) \ | |
739 | i960_setup_incoming_varargs(&CUM,MODE,TYPE,&PRETEND_SIZE,NO_RTL) | |
740 | \f | |
741 | /* Define a data type for recording info about an argument list | |
742 | during the scan of that argument list. This data type should | |
743 | hold all necessary information about the function itself | |
744 | and about the args processed so far, enough to enable macros | |
745 | such as FUNCTION_ARG to determine where the next arg should go. | |
746 | ||
747 | On 80960, this is two integers, which count the number of register | |
748 | parameters and the number of stack parameters seen so far. */ | |
749 | ||
750 | struct cum_args { int ca_nregparms; int ca_nstackparms; }; | |
751 | ||
752 | #define CUMULATIVE_ARGS struct cum_args | |
753 | ||
754 | /* Define the number of registers that can hold parameters. | |
755 | This macro is used only in macro definitions below and/or i960.c. */ | |
756 | #define NPARM_REGS 12 | |
757 | ||
758 | /* Define how to round to the next parameter boundary. | |
759 | This macro is used only in macro definitions below and/or i960.c. */ | |
b46db6e4 | 760 | #define ROUND_PARM(X, MULTIPLE_OF) \ |
ba8ab355 JW |
761 | ((((X) + (MULTIPLE_OF) - 1) / (MULTIPLE_OF)) * MULTIPLE_OF) |
762 | ||
763 | /* Initialize a variable CUM of type CUMULATIVE_ARGS | |
764 | for a call to a function whose data type is FNTYPE. | |
765 | For a library call, FNTYPE is 0. | |
766 | ||
767 | On 80960, the offset always starts at 0; the first parm reg is g0. */ | |
768 | ||
769 | #define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME) \ | |
770 | ((CUM).ca_nregparms = 0, (CUM).ca_nstackparms = 0) | |
771 | ||
772 | /* Update the data in CUM to advance over an argument | |
773 | of mode MODE and data type TYPE. | |
774 | CUM should be advanced to align with the data type accessed and | |
775 | also the size of that data type in # of regs. | |
776 | (TYPE is null for libcalls where that information may not be available.) */ | |
777 | ||
778 | #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \ | |
779 | i960_function_arg_advance(&CUM, MODE, TYPE, NAMED) | |
780 | ||
781 | /* Indicate the alignment boundary for an argument of the specified mode and | |
782 | type. */ | |
783 | #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \ | |
29008b51 JW |
784 | (((TYPE) != 0) \ |
785 | ? ((TYPE_ALIGN (TYPE) <= PARM_BOUNDARY) \ | |
786 | ? PARM_BOUNDARY \ | |
787 | : TYPE_ALIGN (TYPE)) \ | |
788 | : ((GET_MODE_ALIGNMENT (MODE) <= PARM_BOUNDARY) \ | |
789 | ? PARM_BOUNDARY \ | |
790 | : GET_MODE_ALIGNMENT (MODE))) | |
ba8ab355 JW |
791 | |
792 | /* Determine where to put an argument to a function. | |
793 | Value is zero to push the argument on the stack, | |
794 | or a hard register in which to store the argument. | |
795 | ||
796 | MODE is the argument's machine mode. | |
797 | TYPE is the data type of the argument (as a tree). | |
798 | This is null for libcalls where that information may | |
799 | not be available. | |
800 | CUM is a variable of type CUMULATIVE_ARGS which gives info about | |
801 | the preceding args and about the function being called. | |
802 | NAMED is nonzero if this argument is a named parameter | |
803 | (otherwise it is an extra parameter matching an ellipsis). */ | |
804 | ||
805 | extern struct rtx_def *i960_function_arg (); | |
806 | #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \ | |
807 | i960_function_arg(&CUM, MODE, TYPE, NAMED) | |
808 | ||
809 | /* Define how to find the value returned by a function. | |
810 | VALTYPE is the data type of the value (as a tree). | |
811 | If the precise function being called is known, FUNC is its FUNCTION_DECL; | |
812 | otherwise, FUNC is 0. */ | |
813 | ||
254f7d80 JW |
814 | #define FUNCTION_VALUE(TYPE, FUNC) \ |
815 | gen_rtx (REG, TYPE_MODE (TYPE), 0) | |
ba8ab355 | 816 | |
e14fa9c4 DE |
817 | /* Force aggregates and objects larger than 16 bytes to be returned in memory, |
818 | since we only have 4 registers available for return values. */ | |
ba8ab355 | 819 | |
e14fa9c4 DE |
820 | #define RETURN_IN_MEMORY(TYPE) \ |
821 | (TYPE_MODE (TYPE) == BLKmode || int_size_in_bytes (TYPE) > 16) | |
ba8ab355 JW |
822 | |
823 | /* For an arg passed partly in registers and partly in memory, | |
824 | this is the number of registers used. | |
825 | This never happens on 80960. */ | |
826 | ||
827 | #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) 0 | |
828 | \f | |
829 | /* Output the label for a function definition. | |
830 | This handles leaf functions and a few other things for the i960. */ | |
831 | ||
832 | #define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL) \ | |
833 | i960_function_name_declare (FILE, NAME, DECL) | |
834 | ||
835 | /* This macro generates the assembly code for function entry. | |
836 | FILE is a stdio stream to output the code to. | |
837 | SIZE is an int: how many units of temporary storage to allocate. | |
838 | Refer to the array `regs_ever_live' to determine which registers | |
839 | to save; `regs_ever_live[I]' is nonzero if register number I | |
840 | is ever used in the function. This macro is responsible for | |
841 | knowing which registers should not be saved even if used. */ | |
842 | ||
843 | #define FUNCTION_PROLOGUE(FILE, SIZE) i960_function_prologue ((FILE), (SIZE)) | |
844 | ||
845 | /* Output assembler code to FILE to increment profiler label # LABELNO | |
846 | for profiling a function entry. */ | |
847 | ||
848 | #define FUNCTION_PROFILER(FILE, LABELNO) \ | |
849 | fprintf (FILE, "\tlda LP%d,g0\n\tbal mcount\n", (LABELNO)) | |
850 | ||
851 | /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function, | |
852 | the stack pointer does not matter. The value is tested only in | |
853 | functions that have frame pointers. | |
854 | No definition is equivalent to always zero. */ | |
855 | ||
856 | #define EXIT_IGNORE_STACK 1 | |
857 | ||
858 | /* This macro generates the assembly code for function exit, | |
859 | on machines that need it. If FUNCTION_EPILOGUE is not defined | |
860 | then individual return instructions are generated for each | |
861 | return statement. Args are same as for FUNCTION_PROLOGUE. | |
862 | ||
863 | The function epilogue should not depend on the current stack pointer! | |
864 | It should use the frame pointer only. This is mandatory because | |
865 | of alloca; we also take advantage of it to omit stack adjustments | |
866 | before returning. */ | |
867 | ||
868 | #define FUNCTION_EPILOGUE(FILE, SIZE) i960_function_epilogue (FILE, SIZE) | |
869 | \f | |
870 | /* Addressing modes, and classification of registers for them. */ | |
871 | ||
872 | /* #define HAVE_POST_INCREMENT */ | |
873 | /* #define HAVE_POST_DECREMENT */ | |
874 | ||
875 | /* #define HAVE_PRE_DECREMENT */ | |
876 | /* #define HAVE_PRE_INCREMENT */ | |
877 | ||
878 | /* Macros to check register numbers against specific register classes. */ | |
879 | ||
880 | /* These assume that REGNO is a hard or pseudo reg number. | |
881 | They give nonzero only if REGNO is a hard reg of the suitable class | |
882 | or a pseudo reg currently allocated to a suitable hard reg. | |
883 | Since they use reg_renumber, they are safe only once reg_renumber | |
884 | has been allocated, which happens in local-alloc.c. */ | |
885 | ||
886 | #define REGNO_OK_FOR_INDEX_P(REGNO) \ | |
887 | ((REGNO) < 32 || (unsigned) reg_renumber[REGNO] < 32) | |
888 | #define REGNO_OK_FOR_BASE_P(REGNO) \ | |
889 | ((REGNO) < 32 || (unsigned) reg_renumber[REGNO] < 32) | |
890 | #define REGNO_OK_FOR_FP_P(REGNO) \ | |
891 | ((REGNO) < 36 || (unsigned) reg_renumber[REGNO] < 36) | |
892 | ||
893 | /* Now macros that check whether X is a register and also, | |
894 | strictly, whether it is in a specified class. | |
895 | ||
896 | These macros are specific to the 960, and may be used only | |
897 | in code for printing assembler insns and in conditions for | |
898 | define_optimization. */ | |
899 | ||
900 | /* 1 if X is an fp register. */ | |
901 | ||
902 | #define FP_REG_P(X) (REGNO (X) >= 32 && REGNO (X) < 36) | |
903 | ||
904 | /* Maximum number of registers that can appear in a valid memory address. */ | |
905 | #define MAX_REGS_PER_ADDRESS 2 | |
906 | ||
907 | #define CONSTANT_ADDRESS_P(X) CONSTANT_P (X) | |
908 | ||
909 | /* LEGITIMATE_CONSTANT_P is nonzero if the constant value X | |
910 | is a legitimate general operand. | |
911 | It is given that X satisfies CONSTANT_P. | |
912 | ||
913 | Anything but a CONST_DOUBLE can be made to work, excepting 0.0 and 1.0. */ | |
914 | ||
915 | #define LEGITIMATE_CONSTANT_P(X) \ | |
916 | ((GET_CODE (X) != CONST_DOUBLE) || fp_literal ((X), VOIDmode)) | |
917 | ||
918 | /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx | |
919 | and check its validity for a certain class. | |
920 | We have two alternate definitions for each of them. | |
921 | The usual definition accepts all pseudo regs; the other rejects | |
922 | them unless they have been allocated suitable hard regs. | |
923 | The symbol REG_OK_STRICT causes the latter definition to be used. | |
924 | ||
925 | Most source files want to accept pseudo regs in the hope that | |
926 | they will get allocated to the class that the insn wants them to be in. | |
927 | Source files for reload pass need to be strict. | |
928 | After reload, it makes no difference, since pseudo regs have | |
929 | been eliminated by then. */ | |
930 | ||
931 | #ifndef REG_OK_STRICT | |
932 | ||
933 | /* Nonzero if X is a hard reg that can be used as an index | |
934 | or if it is a pseudo reg. */ | |
935 | #define REG_OK_FOR_INDEX_P(X) \ | |
936 | (REGNO (X) < 32 || REGNO (X) >= FIRST_PSEUDO_REGISTER) | |
937 | /* Nonzero if X is a hard reg that can be used as a base reg | |
938 | or if it is a pseudo reg. */ | |
939 | #define REG_OK_FOR_BASE_P(X) \ | |
940 | (REGNO (X) < 32 || REGNO (X) >= FIRST_PSEUDO_REGISTER) | |
941 | ||
942 | #define REG_OK_FOR_INDEX_P_STRICT(X) REGNO_OK_FOR_INDEX_P (REGNO (X)) | |
943 | #define REG_OK_FOR_BASE_P_STRICT(X) REGNO_OK_FOR_BASE_P (REGNO (X)) | |
944 | ||
945 | #else | |
946 | ||
947 | /* Nonzero if X is a hard reg that can be used as an index. */ | |
948 | #define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X)) | |
949 | /* Nonzero if X is a hard reg that can be used as a base reg. */ | |
950 | #define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X)) | |
951 | ||
952 | #endif | |
953 | \f | |
954 | /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression | |
955 | that is a valid memory address for an instruction. | |
956 | The MODE argument is the machine mode for the MEM expression | |
957 | that wants to use this address. | |
958 | ||
959 | On 80960, legitimate addresses are: | |
960 | base ld (g0),r0 | |
961 | disp (12 or 32 bit) ld foo,r0 | |
962 | base + index ld (g0)[g1*1],r0 | |
963 | base + displ ld 0xf00(g0),r0 | |
964 | base + index*scale + displ ld 0xf00(g0)[g1*4],r0 | |
965 | index*scale + base ld (g0)[g1*4],r0 | |
966 | index*scale + displ ld 0xf00[g1*4],r0 | |
967 | index*scale ld [g1*4],r0 | |
968 | index + base + displ ld 0xf00(g0)[g1*1],r0 | |
969 | ||
970 | In each case, scale can be 1, 2, 4, 8, or 16. */ | |
971 | ||
972 | /* Returns 1 if the scale factor of an index term is valid. */ | |
973 | #define SCALE_TERM_P(X) \ | |
974 | (GET_CODE (X) == CONST_INT \ | |
975 | && (INTVAL (X) == 1 || INTVAL (X) == 2 || INTVAL (X) == 4 \ | |
976 | || INTVAL(X) == 8 || INTVAL (X) == 16)) | |
977 | ||
978 | ||
979 | #ifdef REG_OK_STRICT | |
980 | #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ | |
981 | { if (legitimate_address_p (MODE, X, 1)) goto ADDR; } | |
982 | #else | |
983 | #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ | |
984 | { if (legitimate_address_p (MODE, X, 0)) goto ADDR; } | |
985 | #endif | |
986 | \f | |
987 | /* Try machine-dependent ways of modifying an illegitimate address | |
988 | to be legitimate. If we find one, return the new, valid address. | |
989 | This macro is used in only one place: `memory_address' in explow.c. | |
990 | ||
991 | OLDX is the address as it was before break_out_memory_refs was called. | |
992 | In some cases it is useful to look at this to decide what needs to be done. | |
993 | ||
994 | MODE and WIN are passed so that this macro can use | |
995 | GO_IF_LEGITIMATE_ADDRESS. | |
996 | ||
997 | It is always safe for this macro to do nothing. It exists to recognize | |
998 | opportunities to optimize the output. */ | |
999 | ||
13d39dbc | 1000 | /* On 80960, convert non-canonical addresses to canonical form. */ |
ba8ab355 JW |
1001 | |
1002 | extern struct rtx_def *legitimize_address (); | |
1003 | #define LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \ | |
1004 | { rtx orig_x = (X); \ | |
1005 | (X) = legitimize_address (X, OLDX, MODE); \ | |
1006 | if ((X) != orig_x && memory_address_p (MODE, X)) \ | |
1007 | goto WIN; } | |
1008 | ||
1009 | /* Go to LABEL if ADDR (a legitimate address expression) | |
1010 | has an effect that depends on the machine mode it is used for. | |
1011 | On the 960 this is never true. */ | |
1012 | ||
1013 | #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) | |
1014 | \f | |
1015 | /* Specify the machine mode that this machine uses | |
1016 | for the index in the tablejump instruction. */ | |
1017 | #define CASE_VECTOR_MODE SImode | |
1018 | ||
1019 | /* Define this if the tablejump instruction expects the table | |
1020 | to contain offsets from the address of the table. | |
1021 | Do not define this if the table should contain absolute addresses. */ | |
1022 | /* #define CASE_VECTOR_PC_RELATIVE */ | |
1023 | ||
1024 | /* Specify the tree operation to be used to convert reals to integers. */ | |
1025 | #define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR | |
1026 | ||
1027 | /* This is the kind of divide that is easiest to do in the general case. */ | |
1028 | #define EASY_DIV_EXPR TRUNC_DIV_EXPR | |
1029 | ||
1030 | /* Define this as 1 if `char' should by default be signed; else as 0. */ | |
1031 | #define DEFAULT_SIGNED_CHAR 0 | |
1032 | ||
1033 | /* Allow and ignore #sccs directives. */ | |
1034 | #define SCCS_DIRECTIVE | |
1035 | ||
1036 | /* Max number of bytes we can move from memory to memory | |
1037 | in one reasonably fast instruction. */ | |
1038 | #define MOVE_MAX 16 | |
1039 | ||
1040 | /* Define if normal loads of shorter-than-word items from memory clears | |
1041 | the rest of the bigs in the register. */ | |
1042 | #define BYTE_LOADS_ZERO_EXTEND | |
1043 | ||
1044 | /* Nonzero if access to memory by bytes is no faster than for words. | |
1045 | Defining this results in worse code on the i960. */ | |
1046 | ||
1047 | #define SLOW_BYTE_ACCESS 0 | |
1048 | ||
1049 | /* We assume that the store-condition-codes instructions store 0 for false | |
1050 | and some other value for true. This is the value stored for true. */ | |
1051 | ||
1052 | #define STORE_FLAG_VALUE 1 | |
1053 | ||
1054 | /* Define if shifts truncate the shift count | |
1055 | which implies one can omit a sign-extension or zero-extension | |
1056 | of a shift count. */ | |
1057 | #define SHIFT_COUNT_TRUNCATED | |
1058 | ||
1059 | /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits | |
1060 | is done just by pretending it is already truncated. */ | |
1061 | #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 | |
1062 | ||
1063 | /* Specify the machine mode that pointers have. | |
1064 | After generation of rtl, the compiler makes no further distinction | |
1065 | between pointers and any other objects of this machine mode. */ | |
1066 | #define Pmode SImode | |
1067 | ||
1068 | /* Specify the widest mode that BLKmode objects can be promoted to */ | |
1069 | #define MAX_FIXED_MODE_SIZE GET_MODE_BITSIZE (TImode) | |
1070 | \f | |
1071 | /* These global variables are used to pass information between | |
1072 | cc setter and cc user at insn emit time. */ | |
1073 | ||
1074 | extern struct rtx_def *i960_compare_op0, *i960_compare_op1; | |
1075 | ||
1076 | /* Define the function that build the compare insn for scc and bcc. */ | |
1077 | ||
1078 | extern struct rtx_def *gen_compare_reg (); | |
1079 | ||
1080 | /* Add any extra modes needed to represent the condition code. | |
1081 | ||
1082 | Also, signed and unsigned comparisons are distinguished, as | |
1083 | are operations which are compatible with chkbit insns. */ | |
1084 | #define EXTRA_CC_MODES CC_UNSmode, CC_CHKmode | |
1085 | ||
1086 | /* Define the names for the modes specified above. */ | |
1087 | #define EXTRA_CC_NAMES "CC_UNS", "CC_CHK" | |
1088 | ||
1089 | /* Given a comparison code (EQ, NE, etc.) and the first operand of a COMPARE, | |
1090 | return the mode to be used for the comparison. For floating-point, CCFPmode | |
1091 | should be used. CC_NOOVmode should be used when the first operand is a | |
1092 | PLUS, MINUS, or NEG. CCmode should be used when no special processing is | |
1093 | needed. */ | |
c3eebffb | 1094 | #define SELECT_CC_MODE(OP,X,Y) select_cc_mode (OP, X) |
ba8ab355 JW |
1095 | |
1096 | /* A function address in a call instruction is a byte address | |
1097 | (for indexing purposes) so give the MEM rtx a byte's mode. */ | |
1098 | #define FUNCTION_MODE SImode | |
1099 | ||
1100 | /* Define this if addresses of constant functions | |
1101 | shouldn't be put through pseudo regs where they can be cse'd. | |
1102 | Desirable on machines where ordinary constants are expensive | |
1103 | but a CALL with constant address is cheap. */ | |
1104 | #define NO_FUNCTION_CSE | |
1105 | ||
1106 | /* Use memcpy, etc. instead of bcopy. */ | |
1107 | ||
1108 | #ifndef WIND_RIVER | |
1109 | #define TARGET_MEM_FUNCTIONS 1 | |
1110 | #endif | |
1111 | ||
1112 | /* Compute the cost of computing a constant rtl expression RTX | |
1113 | whose rtx-code is CODE. The body of this macro is a portion | |
1114 | of a switch statement. If the code is computed here, | |
1115 | return it with a return statement. Otherwise, break from the switch. */ | |
1116 | ||
1117 | /* Constants that can be (non-ldconst) insn operands are cost 0. Constants | |
1118 | that can be non-ldconst operands in rare cases are cost 1. Other constants | |
1119 | have higher costs. */ | |
1120 | ||
1121 | #define CONST_COSTS(RTX, CODE, OUTER_CODE) \ | |
1122 | case CONST_INT: \ | |
1123 | if ((INTVAL (RTX) >= 0 && INTVAL (RTX) < 32) \ | |
1124 | || power2_operand (RTX, VOIDmode)) \ | |
1125 | return 0; \ | |
1126 | else if (INTVAL (RTX) >= -31 && INTVAL (RTX) < 0) \ | |
1127 | return 1; \ | |
1128 | case CONST: \ | |
1129 | case LABEL_REF: \ | |
1130 | case SYMBOL_REF: \ | |
1131 | return (TARGET_FLAG_C_SERIES ? 6 : 8); \ | |
1132 | case CONST_DOUBLE: \ | |
1133 | if ((RTX) == CONST0_RTX (DFmode) || (RTX) == CONST0_RTX (SFmode) \ | |
1134 | || (RTX) == CONST1_RTX (DFmode) || (RTX) == CONST1_RTX (SFmode))\ | |
1135 | return 1; \ | |
1136 | return 12; | |
1137 | ||
1138 | /* The i960 offers addressing modes which are "as cheap as a register". | |
1139 | See i960.c (or gcc.texinfo) for details. */ | |
1140 | ||
1141 | #define ADDRESS_COST(RTX) \ | |
1142 | (GET_CODE (RTX) == REG ? 1 : i960_address_cost (RTX)) | |
1143 | \f | |
1144 | /* Control the assembler format that we output. */ | |
1145 | ||
1146 | /* Output at beginning of assembler file. */ | |
1147 | ||
1148 | #define ASM_FILE_START(file) | |
1149 | ||
1150 | /* Output to assembler file text saying following lines | |
1151 | may contain character constants, extra white space, comments, etc. */ | |
1152 | ||
1153 | #define ASM_APP_ON "" | |
1154 | ||
1155 | /* Output to assembler file text saying following lines | |
1156 | no longer contain unusual constructs. */ | |
1157 | ||
1158 | #define ASM_APP_OFF "" | |
1159 | ||
1160 | /* Output before read-only data. */ | |
1161 | ||
1162 | #define TEXT_SECTION_ASM_OP ".text" | |
1163 | ||
1164 | /* Output before writable data. */ | |
1165 | ||
1166 | #define DATA_SECTION_ASM_OP ".data" | |
1167 | ||
1168 | /* How to refer to registers in assembler output. | |
1169 | This sequence is indexed by compiler's hard-register-number (see above). */ | |
1170 | ||
1171 | #define REGISTER_NAMES { \ | |
1172 | "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \ | |
1173 | "g8", "g9", "g10", "g11", "g12", "g13", "g14", "fp", \ | |
1174 | "pfp","sp", "rip", "r3", "r4", "r5", "r6", "r7", \ | |
1175 | "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ | |
1176 | "fp0","fp1","fp2", "fp3", "cc", "fake" } | |
1177 | ||
1178 | /* How to renumber registers for dbx and gdb. | |
1179 | In the 960 encoding, g0..g15 are registers 16..31. */ | |
1180 | ||
1181 | #define DBX_REGISTER_NUMBER(REGNO) \ | |
1182 | (((REGNO) < 16) ? (REGNO) + 16 \ | |
1183 | : (((REGNO) > 31) ? (REGNO) : (REGNO) - 16)) | |
1184 | ||
1185 | /* Don't emit dbx records longer than this. This is an arbitrary value. */ | |
1186 | #define DBX_CONTIN_LENGTH 1500 | |
1187 | ||
1188 | /* This is how to output a note to DBX telling it the line number | |
1189 | to which the following sequence of instructions corresponds. */ | |
1190 | ||
1191 | #define ASM_OUTPUT_SOURCE_LINE(FILE, LINE) \ | |
1192 | { if (write_symbols == SDB_DEBUG) { \ | |
1193 | fprintf ((FILE), "\t.ln %d\n", \ | |
1194 | (sdb_begin_function_line \ | |
1195 | ? (LINE) - sdb_begin_function_line : 1)); \ | |
1196 | } else if (write_symbols == DBX_DEBUG) { \ | |
1197 | fprintf((FILE),"\t.stabd 68,0,%d\n",(LINE)); \ | |
1198 | } } | |
1199 | ||
1200 | /* This is how to output the definition of a user-level label named NAME, | |
1201 | such as the label on a static function or variable NAME. */ | |
1202 | ||
1203 | #define ASM_OUTPUT_LABEL(FILE,NAME) \ | |
1204 | do { assemble_name (FILE, NAME); fputs (":\n", FILE); } while (0) | |
1205 | ||
1206 | /* This is how to output a command to make the user-level label named NAME | |
1207 | defined for reference from other files. */ | |
1208 | ||
1209 | #define ASM_GLOBALIZE_LABEL(FILE,NAME) \ | |
1210 | { fputs ("\t.globl ", FILE); \ | |
1211 | assemble_name (FILE, NAME); \ | |
1212 | fputs ("\n", FILE); } | |
1213 | ||
1214 | /* This is how to output a reference to a user-level label named NAME. | |
1215 | `assemble_name' uses this. */ | |
1216 | ||
1217 | #define ASM_OUTPUT_LABELREF(FILE,NAME) fprintf (FILE, "_%s", NAME) | |
1218 | ||
1219 | /* This is how to output an internal numbered label where | |
1220 | PREFIX is the class of label and NUM is the number within the class. */ | |
1221 | ||
1222 | #define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM) \ | |
1223 | fprintf (FILE, "%s%d:\n", PREFIX, NUM) | |
1224 | ||
1225 | /* This is how to store into the string LABEL | |
1226 | the symbol_ref name of an internal numbered label where | |
1227 | PREFIX is the class of label and NUM is the number within the class. | |
1228 | This is suitable for output with `assemble_name'. */ | |
1229 | ||
1230 | #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \ | |
1231 | sprintf (LABEL, "*%s%d", PREFIX, NUM) | |
1232 | ||
1233 | /* This is how to output an assembler line defining a `double' constant. */ | |
1234 | ||
1235 | #define ASM_OUTPUT_DOUBLE(FILE,VALUE) i960_output_double(FILE, VALUE) | |
1236 | ||
1237 | /* This is how to output an assembler line defining a `float' constant. */ | |
1238 | ||
1239 | #define ASM_OUTPUT_FLOAT(FILE,VALUE) i960_output_float(FILE, VALUE) | |
1240 | ||
1241 | /* This is how to output an assembler line defining an `int' constant. */ | |
1242 | ||
1243 | #define ASM_OUTPUT_INT(FILE,VALUE) \ | |
1244 | ( fprintf (FILE, "\t.word "), \ | |
1245 | output_addr_const (FILE, (VALUE)), \ | |
1246 | fprintf (FILE, "\n")) | |
1247 | ||
1248 | /* Likewise for `char' and `short' constants. */ | |
1249 | ||
1250 | #define ASM_OUTPUT_SHORT(FILE,VALUE) \ | |
1251 | ( fprintf (FILE, "\t.short "), \ | |
1252 | output_addr_const (FILE, (VALUE)), \ | |
1253 | fprintf (FILE, "\n")) | |
1254 | ||
1255 | #define ASM_OUTPUT_CHAR(FILE,VALUE) \ | |
1256 | ( fprintf (FILE, "\t.byte "), \ | |
1257 | output_addr_const (FILE, (VALUE)), \ | |
1258 | fprintf (FILE, "\n")) | |
1259 | ||
1260 | /* This is how to output an assembler line for a numeric constant byte. */ | |
1261 | ||
1262 | #define ASM_OUTPUT_BYTE(FILE,VALUE) \ | |
1263 | fprintf (FILE, "\t.byte 0x%x\n", (VALUE)) | |
1264 | ||
1265 | #define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \ | |
1266 | fprintf (FILE, "\tst\t%s,(sp)\n\taddo\t4,sp,sp\n", reg_names[REGNO]) | |
1267 | ||
1268 | /* This is how to output an insn to pop a register from the stack. | |
1269 | It need not be very fast code. */ | |
1270 | ||
1271 | #define ASM_OUTPUT_REG_POP(FILE,REGNO) \ | |
1272 | fprintf (FILE, "\tsubo\t4,sp,sp\n\tld\t(sp),%s\n", reg_names[REGNO]) | |
1273 | ||
1274 | /* This is how to output an element of a case-vector that is absolute. */ | |
1275 | ||
1276 | #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ | |
1277 | fprintf (FILE, "\t.word L%d\n", VALUE) | |
1278 | ||
1279 | /* This is how to output an element of a case-vector that is relative. */ | |
1280 | ||
1281 | #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) \ | |
1282 | fprintf (FILE, "\t.word L%d-L%d\n", VALUE, REL) | |
1283 | ||
1284 | /* This is how to output an assembler line that says to advance the | |
1285 | location counter to a multiple of 2**LOG bytes. */ | |
1286 | ||
1287 | #define ASM_OUTPUT_ALIGN(FILE,LOG) \ | |
1288 | fprintf (FILE, "\t.align %d\n", (LOG)) | |
1289 | ||
1290 | #define ASM_OUTPUT_SKIP(FILE,SIZE) \ | |
1291 | fprintf (FILE, "\t.space %d\n", (SIZE)) | |
1292 | ||
1293 | /* This says how to output an assembler line | |
1294 | to define a global common symbol. */ | |
1295 | ||
1296 | /* For common objects, output unpadded size... gld960 & lnk960 both | |
1297 | have code to align each common object at link time. Also, if size | |
1298 | is 0, treat this as a declaration, not a definition - i.e., | |
1299 | do nothing at all. */ | |
1300 | ||
1301 | #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \ | |
1302 | { if ((SIZE) != 0) \ | |
1303 | { \ | |
1304 | fputs (".globl ", (FILE)), \ | |
1305 | assemble_name ((FILE), (NAME)), \ | |
1306 | fputs ("\n.comm ", (FILE)), \ | |
1307 | assemble_name ((FILE), (NAME)), \ | |
1308 | fprintf ((FILE), ",%d\n", (ROUNDED)); \ | |
1309 | } \ | |
1310 | } | |
1311 | ||
1312 | /* This says how to output an assembler line to define a local common symbol. | |
1313 | Output unpadded size, with request to linker to align as requested. | |
1314 | 0 size should not be possible here. */ | |
1315 | ||
1316 | #define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGN) \ | |
1317 | ( fputs (".bss\t", (FILE)), \ | |
1318 | assemble_name ((FILE), (NAME)), \ | |
1319 | fprintf ((FILE), ",%d,%d\n", (SIZE), \ | |
1320 | ((ALIGN) <= 8 ? 0 \ | |
1321 | : ((ALIGN) <= 16 ? 1 \ | |
1322 | : ((ALIGN) <= 32 ? 2 \ | |
1323 | : ((ALIGN <= 64 ? 3 : 4))))))) | |
1324 | ||
1325 | /* Output text for an #ident directive. */ | |
1326 | #define ASM_OUTPUT_IDENT(FILE, STR) fprintf(FILE, "\t# %s\n", STR); | |
1327 | ||
1328 | /* Align code to 8 byte boundary if TARGET_CODE_ALIGN is true. */ | |
1329 | ||
1330 | #define ASM_OUTPUT_ALIGN_CODE(FILE) \ | |
1331 | { if (TARGET_CODE_ALIGN) fputs("\t.align 3\n",FILE); } | |
1332 | ||
1333 | /* Store in OUTPUT a string (made with alloca) containing | |
1334 | an assembler-name for a local static variable named NAME. | |
1335 | LABELNO is an integer which is different for each call. */ | |
1336 | ||
1337 | #define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \ | |
1338 | ( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \ | |
1339 | sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO))) | |
1340 | ||
1341 | /* Define the parentheses used to group arithmetic operations | |
1342 | in assembler code. */ | |
1343 | ||
1344 | #define ASM_OPEN_PAREN "(" | |
1345 | #define ASM_CLOSE_PAREN ")" | |
1346 | ||
1347 | /* Define results of standard character escape sequences. */ | |
1348 | #define TARGET_BELL 007 | |
1349 | #define TARGET_BS 010 | |
1350 | #define TARGET_TAB 011 | |
1351 | #define TARGET_NEWLINE 012 | |
1352 | #define TARGET_VT 013 | |
1353 | #define TARGET_FF 014 | |
1354 | #define TARGET_CR 015 | |
1355 | \f | |
1356 | /* Output assembler code to FILE to initialize this source file's | |
1357 | basic block profiling info, if that has not already been done. */ | |
1358 | ||
1359 | #define FUNCTION_BLOCK_PROFILER(FILE, LABELNO) \ | |
1360 | { fprintf (FILE, "\tld LPBX0,g12\n"); \ | |
1361 | fprintf (FILE, "\tcmpobne 0,g12,LPY%d\n",LABELNO);\ | |
1362 | fprintf (FILE, "\tlda LPBX0,g12\n"); \ | |
1363 | fprintf (FILE, "\tcall ___bb_init_func\n"); \ | |
1364 | fprintf (FILE, "LPY%d:\n",LABELNO); } | |
1365 | ||
1366 | /* Output assembler code to FILE to increment the entry-count for | |
1367 | the BLOCKNO'th basic block in this source file. */ | |
1368 | ||
1369 | #define BLOCK_PROFILER(FILE, BLOCKNO) \ | |
1370 | { int blockn = (BLOCKNO); \ | |
1371 | fprintf (FILE, "\tld LPBX2+%d,g12\n", 4 * blockn); \ | |
1372 | fprintf (FILE, "\taddo g12,1,g12\n"); \ | |
1373 | fprintf (FILE, "\tst g12,LPBX2+%d\n", 4 * blockn); } | |
1374 | \f | |
1375 | /* Print operand X (an rtx) in assembler syntax to file FILE. | |
1376 | CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified. | |
1377 | For `%' followed by punctuation, CODE is the punctuation and X is null. */ | |
1378 | ||
1379 | #define PRINT_OPERAND(FILE, X, CODE) \ | |
1380 | i960_print_operand (FILE, X, CODE); | |
1381 | ||
1382 | /* Print a memory address as an operand to reference that memory location. */ | |
1383 | ||
1384 | #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \ | |
1385 | i960_print_operand_addr (FILE, ADDR) | |
1386 | \f | |
1387 | /* Output assembler code for a block containing the constant parts | |
1388 | of a trampoline, leaving space for the variable parts. */ | |
1389 | ||
1390 | /* On the i960, the trampoline contains three instructions: | |
1391 | ldconst _function, r4 | |
1392 | ldconst static addr, r3 | |
1393 | jump (r4) */ | |
1394 | ||
1395 | #define TRAMPOLINE_TEMPLATE(FILE) \ | |
1396 | { \ | |
1397 | ASM_OUTPUT_INT (FILE, gen_rtx (CONST_INT, VOIDmode, 0x8C203000)); \ | |
1398 | ASM_OUTPUT_INT (FILE, gen_rtx (CONST_INT, VOIDmode, 0x00000000)); \ | |
1399 | ASM_OUTPUT_INT (FILE, gen_rtx (CONST_INT, VOIDmode, 0x8C183000)); \ | |
1400 | ASM_OUTPUT_INT (FILE, gen_rtx (CONST_INT, VOIDmode, 0x00000000)); \ | |
1401 | ASM_OUTPUT_INT (FILE, gen_rtx (CONST_INT, VOIDmode, 0x84212000)); \ | |
1402 | } | |
1403 | ||
1404 | /* Length in units of the trampoline for entering a nested function. */ | |
1405 | ||
1406 | #define TRAMPOLINE_SIZE 20 | |
1407 | ||
1408 | /* Emit RTL insns to initialize the variable parts of a trampoline. | |
1409 | FNADDR is an RTX for the address of the function's pure code. | |
1410 | CXT is an RTX for the static chain value for the function. */ | |
1411 | ||
1412 | #define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \ | |
1413 | { \ | |
1414 | emit_move_insn (gen_rtx (MEM, SImode, plus_constant (TRAMP, 4)), \ | |
1415 | FNADDR); \ | |
1416 | emit_move_insn (gen_rtx (MEM, SImode, plus_constant (TRAMP, 12)), \ | |
1417 | CXT); \ | |
1418 | } | |
1419 | ||
1420 | #if 0 | |
13d39dbc | 1421 | /* Promote char and short arguments to ints, when want compatibility with |
ba8ab355 JW |
1422 | the iC960 compilers. */ |
1423 | ||
1424 | /* ??? In order for this to work, all users would need to be changed | |
1425 | to test the value of the macro at run time. */ | |
1426 | #define PROMOTE_PROTOTYPES TARGET_CLEAN_LINKAGE | |
1427 | /* ??? This does not exist. */ | |
1428 | #define PROMOTE_RETURN TARGET_CLEAN_LINKAGE | |
1429 | #endif | |
1430 | ||
1431 | /* Instruction type definitions. Used to alternate instructions types for | |
1432 | better performance on the C series chips. */ | |
1433 | ||
1434 | enum insn_types { I_TYPE_REG, I_TYPE_MEM, I_TYPE_CTRL }; | |
1435 | ||
1436 | /* Holds the insn type of the last insn output to the assembly file. */ | |
1437 | ||
1438 | extern enum insn_types i960_last_insn_type; | |
1439 | ||
1440 | /* Parse opcodes, and set the insn last insn type based on them. */ | |
1441 | ||
1442 | #define ASM_OUTPUT_OPCODE(FILE, INSN) i960_scan_opcode (INSN) | |
1443 | ||
1444 | /* Table listing what rtl codes each predicate in i960.c will accept. */ | |
1445 | ||
1446 | #define PREDICATE_CODES \ | |
1447 | {"fpmove_src_operand", {CONST_INT, CONST_DOUBLE, CONST, SYMBOL_REF, \ | |
1448 | LABEL_REF, SUBREG, REG, MEM}}, \ | |
1449 | {"arith_operand", {SUBREG, REG, CONST_INT}}, \ | |
1450 | {"fp_arith_operand", {SUBREG, REG, CONST_DOUBLE}}, \ | |
1451 | {"signed_arith_operand", {SUBREG, REG, CONST_INT}}, \ | |
1452 | {"literal", {CONST_INT}}, \ | |
1453 | {"fp_literal_one", {CONST_DOUBLE}}, \ | |
1454 | {"fp_literal_double", {CONST_DOUBLE}}, \ | |
1455 | {"fp_literal", {CONST_DOUBLE}}, \ | |
1456 | {"signed_literal", {CONST_INT}}, \ | |
1457 | {"symbolic_memory_operand", {SUBREG, MEM}}, \ | |
1458 | {"eq_or_neq", {EQ, NE}}, \ | |
1459 | {"arith32_operand", {SUBREG, REG, LABEL_REF, SYMBOL_REF, CONST_INT, \ | |
1460 | CONST_DOUBLE, CONST}}, \ | |
1461 | {"power2_operand", {CONST_INT}}, | |
1462 | ||
1463 | /* Define functions in i960.c and used in insn-output.c. */ | |
1464 | ||
1465 | extern char *i960_output_ldconst (); | |
1466 | extern char *i960_output_call_insn (); | |
1467 | extern char *i960_output_ret_insn (); | |
778ebe62 JW |
1468 | |
1469 | /* Defined in reload.c, and used in insn-recog.c. */ | |
1470 | ||
1471 | extern int rtx_equal_function_value_matters; |