ifstream_extract_float.cc: Add higher precision tests.

[gcc.git] / configure.in

#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
#   1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

##############################################################################
### WARNING: this file contains embedded tabs.  Do not run untabify on this file.

AC_INIT(move-if-change)
AC_PREREQ(2.13)
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM

# Get 'install' or 'install-sh' and its variants.
AC_PROG_INSTALL

sinclude(config/acx.m4)

### we might need to use some other shell than /bin/sh for running subshells
### If we are on Windows, search for the shell.  This will permit people
### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
### without also having to set CONFIG_SHELL.  This code will work when
### using bash, which sets OSTYPE.
case "${OSTYPE}" in
*win32*)
  if test x${CONFIG_SHELL} = x ; then
    if test ! -f /bin/sh ; then
      if test x${SHELL} != x && test -f ${SHELL} ; then
	CONFIG_SHELL=${SHELL}
	export CONFIG_SHELL
      else
	for prog in sh sh.exe bash bash.exe; do
	  IFS="${IFS=	}"; save_ifs="$IFS"; IFS="${IFS}:"
	  for dir in $PATH; do
	    test -z "$dir" && dir=.
	    if test -f $dir/$prog; then
	      CONFIG_SHELL=$dir/$prog
	      export CONFIG_SHELL
	      break
	    fi
	  done
	  IFS="$save_ifs"
	  test -n "${CONFIG_SHELL}" && break
	done
      fi
    fi
  fi
  ;;
esac

config_shell=${CONFIG_SHELL-/bin/sh}

progname=$0
# if PWD already has a value, it is probably wrong.
if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi

# Export original configure arguments for use by sub-configures.  These
# will be expanded by make, so quote '$'.
tmp="$progname $@"
sed -e 's,\$,$$,g' <<EOF_SED > conftestsed.out
$tmp
EOF_SED
TOPLEVEL_CONFIGURE_ARGUMENTS=`cat conftestsed.out`
rm -f conftestsed.out
AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)

moveifchange=${srcdir}/move-if-change

# Set srcdir to "." if that's what it is.
# This is important for multilib support.
pwd=`${PWDCMD-pwd}`
srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
if test "${pwd}" = "${srcpwd}" ; then
  srcdir=.
fi

topsrcdir=$srcpwd

extra_host_args=
# Define the trigger file to make sure configure will re-run whenever
# the gcc version number changes.
if test "${with_gcc_version_trigger+set}" = set ; then
  gcc_version_trigger="$with_gcc_version_trigger"
  gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
else
  # If gcc's sources are available, define the trigger file.
  if test -f ${topsrcdir}/gcc/version.c ; then
    gcc_version_trigger=${topsrcdir}/gcc/version.c
    gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([[^ \"]]*\)[[ \"]].*/\1/'`
    case "$ac_configure_args" in
      *--with-gcc-version-trigger=$gcc_version_trigger* )
        ;;
      * )
        # Add to all subconfigure arguments: build, host, and target.
        ac_configure_args="$ac_configure_args --with-gcc-version-trigger=$gcc_version_trigger"
        ;;
    esac
  fi
fi

### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool.  Then put it into the appropriate list
### (library or tools, host or target), doing a dependency sort.

# Subdirs will be configured in the order listed in build_configdirs, 
# configdirs, or target_configdirs; see the serialization section below.

# Dependency sorting is only needed when *configuration* must be done in 
# a particular order.  In all cases a dependency should be specified in 
# the Makefile, whether or not it's implicitly specified here.

# Double entries in build_configdirs, configdirs, or target_configdirs may
# cause circular dependencies and break everything horribly.

# these libraries are used by various programs built for the host environment
#
host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib"

# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"

# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
	target-boehm-gc \
	target-zlib \
	target-qthreads \
	target-libjava"

# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
target_libraries="target-libiberty \
		target-libgloss \
		target-newlib \
		target-libstdc++-v3 \
		target-libf2c \
		${libgcj} \
		target-libobjc"

# these tools are built using the target libraries, and are intended to
# run only in the target environment
#
# note: any program that *uses* libraries that are in the "target_libraries"
# list belongs in this list.  those programs are also very likely
# candidates for the "native_only" list which follows
#
target_tools="target-examples target-groff target-gperf target-rda"

################################################################################

## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines.  This
## is important because configure will choke if they ever get through.
## ${configdirs} is directories we build using the host tools.
## ${target_configdirs} is directories we build using the target tools.
#
configdirs=`echo ${host_libs} ${host_tools}`
target_configdirs=`echo ${target_libraries} ${target_tools}`

# Only make build modules if build != host.
# This should be done more generally, but at the moment it doesn't matter.
if test ${host_alias} != ${build_alias} ; then
  # This is the only build module.
  build_modules=libiberty
else
  build_modules=
fi


################################################################################

srcname="gnu development package"

# This gets set non-empty for some net releases of packages.
appdirs=""

# Define is_cross_compiler to save on calls to 'test'.
is_cross_compiler=
if test x"${host}" = x"${target}" ; then
  is_cross_compiler=no
else
  is_cross_compiler=yes
fi	

# Find the build and target subdir names.
GCC_TOPLEV_SUBDIRS

# Skipdirs are removed silently.
skipdirs=
# Noconfigdirs are removed loudly.
noconfigdirs=""

use_gnu_ld=
# Make sure we don't let GNU ld be added if we didn't want it.
if test x$with_gnu_ld = xno ; then
  use_gnu_ld=no
  noconfigdirs="$noconfigdirs ld"
fi

use_gnu_as=
# Make sure we don't let GNU as be added if we didn't want it.
if test x$with_gnu_as = xno ; then
  use_gnu_as=no
  noconfigdirs="$noconfigdirs gas"
fi

# some tools are so dependent upon X11 that if we're not building with X, 
# it's not even worth trying to configure, much less build, that tool.

case ${with_x} in
  yes | "") ;; # the default value for this tree is that X11 is available
  no)
    skipdirs="${skipdirs} tk tix itcl libgui"
    # We won't be able to build gdbtk without X.
    enable_gdbtk=no 
    ;;
  *)  echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
esac

# Some tools are only suitable for building in a "native" situation.
# Remove these if host!=target.  
native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"

# Similarly, some are only suitable for cross toolchains.
# Remove these if host=target.
cross_only="target-libgloss target-newlib target-opcodes"

case $is_cross_compiler in
  no) skipdirs="${skipdirs} ${cross_only}" ;;
  yes) skipdirs="${skipdirs} ${native_only}" ;;
esac

# If both --with-headers and --with-libs are specified, default to
# --without-newlib.
if test x"${with_headers}" != x && test x"${with_headers} != xno \
   && test x"${with_libs}" != x && test x"${with_libs} != xno ; then
  if test x"${with_newlib}" = x ; then
    with_newlib=no
  fi
fi

# Recognize --with-newlib/--without-newlib.
case ${with_newlib} in
  no) skipdirs="${skipdirs} target-newlib" ;;
  yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac

# Configure extra directories which are host specific

case "${host}" in
  *-cygwin*)
    configdirs="$configdirs libtermcap" ;;
esac

# Remove more programs from consideration, based on the host or 
# target this usually means that a port of the program doesn't
# exist yet.

case "${host}" in
  hppa*64*-*-*)
    noconfigdirs="$noconfigdirs byacc"
    ;;
  i[[3456789]]86-*-vsta)
    noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
    ;;
  i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
    noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
    ;;
  i[[3456789]]86-*-mingw32*)
    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
    noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
    ;;
  i[[3456789]]86-*-beos*)
    noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
    ;;
  *-*-cygwin*)
    noconfigdirs="autoconf automake send-pr rcs guile perl"
    ;;
  *-*-netbsd*)
    noconfigdirs="rcs"
    ;;
  ppc*-*-pe)
    noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
    ;;
  powerpc-*-beos*)
    noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
    ;;
  *-*-darwin*)
    noconfigdirs="$noconfigdirs tk itcl tix libgui"
    ;;
esac

# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
libgcj_saved=$libgcj
case $enable_libgcj in
yes)
  # If we reset it here, it won't get added to noconfigdirs in the
  # target-specific build rules, so it will be forcibly enabled
  # (unless the Java language itself isn't enabled).
  libgcj=
  ;;
no)
  # Make sure we get it printed in the list of not supported target libs.
  noconfigdirs="$noconfigdirs ${libgcj}"
  ;;
esac

case "${target}" in
  *-*-chorusos)
    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
    ;;
  powerpc-*-darwin*)
    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
    noconfigdirs="$noconfigdirs target-libobjc"
    ;;
  *-*-darwin*)
    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
    noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
    ;;
  *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
    ;;
  *-*-kaos*)
    # Remove unsupported stuff on all kaOS configurations.
    skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-libf2c target-librx"
    skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
    skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
    noconfigdirs="$noconfigdirs target-libgloss"
    ;;
  *-*-netbsd*)
    # Skip some stuff on all NetBSD configurations.
    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"

    # Skip some stuff that's unsupported on some NetBSD configurations.
    case "${target}" in
      i*86-*-netbsdelf*) ;;
      arm*-*-netbsdelf*) ;;
      *)
	noconfigdirs="$noconfigdirs ${libgcj}"
	;;
    esac
    ;;
  *-*-netware)
    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
    ;;
  *-*-rtems*)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    case ${target} in
	h8300*-*-* | h8500-*-*)
	  noconfigdirs="$noconfigdirs target-libf2c"
          ;;
        *) ;;
    esac
    ;;
  *-*-uclinux*)
    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
    ;;
  *-*-vxworks*)
    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}"
    ;;
  alpha*-dec-osf*)
    # ld works, but does not support shared libraries.
    # newlib is not 64 bit ready.  I'm not sure about fileutils.
    # gas doesn't generate exception information.
    noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
    ;;
  alpha*-*-*vms*)
    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
    ;;
  alpha*-*-linux*)
    # newlib is not 64 bit ready
    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
    ;;
  alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
    ;;
  alpha*-*-*)
    # newlib is not 64 bit ready
    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
    ;;
  am33_2.0-*-linux*)
    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
    ;;
  sh-*-linux*)
    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
    ;;    
  sh*-*-pe|mips*-*-pe|*arm-wince-pe)
    noconfigdirs="$noconfigdirs ${libgcj}"
    noconfigdirs="$noconfigdirs target-examples"
    noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
    noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
    noconfigdirs="$noconfigdirs expect dejagnu"
    # the C++ libraries don't build on top of CE's C libraries
    noconfigdirs="$noconfigdirs target-libstdc++-v3"
    noconfigdirs="$noconfigdirs target-newlib"
    case "${host}" in
      *-*-cygwin*) ;; # keep gdb and readline
      *) noconfigdirs="$noconfigdirs gdb readline"
	 ;;
    esac
    ;;
  arc-*-*)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  arm-*-coff | strongarm-*-coff | xscale-*-coff)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
    noconfigdirs="$noconfigdirs target-libffi target-qthreads"
    ;;
  arm-*-pe*)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  arm-*-oabi*)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  thumb-*-coff)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  thumb-*-elf)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  thumb-*-oabi)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  thumb-*-pe)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  arm-*-riscix*)
    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
    ;;
  avr-*-*)
    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
    ;;
  c4x-*-* | tic4x-*-*)
    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
    ;;
  c54x*-*-* | tic54x-*-*)
    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
    ;;
  cris-*-*)
    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
    ;;
  d10v-*-*)
    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
    ;;
  d30v-*-*)
    noconfigdirs="$noconfigdirs ${libgcj} gdb"
    ;;
  fr30-*-elf*)
    noconfigdirs="$noconfigdirs ${libgcj} gdb"
    ;;
  frv-*-*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  h8300*-*-*)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c"
    ;;
  h8500-*-*)
    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
    ;;
  hppa*64*-*-linux* | parisc*64*-*-linux*)
    # In this case, it's because the hppa64-linux target is for
    # the kernel only at this point and has no libc, and thus no
    # headers, crt*.o, etc., all of which are needed by these.
    noconfigdirs="$noconfigdirs target-zlib"
    ;;
  hppa*-*-*elf* | \
  parisc*-*-linux* | hppa*-*-linux* | \
  hppa*-*-lites* | \
  hppa*-*-openbsd* | \
  hppa*64*-*-*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    # Do configure ld/binutils/gas for this case.
    ;;
  hppa*-*-*)
    # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
    # build on HP-UX 10.20.
    noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
    ;;
  i960-*-*)
    noconfigdirs="$noconfigdirs ${libgcj} gdb"
    ;;
  ia64*-*-elf*)
    # No gdb support yet.
    noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
    ;;
  ia64*-**-hpux*)
    # No gdb or ld support yet.
    noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
    ;;
  i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  i[[3456789]]86-*-freebsd* | i[[3456789]]86-*-kfreebsd*-gnu)
    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
    ;;
  i[[3456789]]86-*-linux*)
    # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
    # not build java stuff by default.
    case "${target}" in
      *-*-*libc1*)
	noconfigdirs="$noconfigdirs ${libgcj}";;
    esac

    # This section makes it possible to build newlib natively on linux.
    # If we are using a cross compiler then don't configure newlib.
    if test x${is_cross_compiler} != xno ; then
      noconfigdirs="$noconfigdirs target-newlib"
    fi
    noconfigdirs="$noconfigdirs target-libgloss"
    # If we are not using a cross compiler, do configure newlib.
    # Note however, that newlib will only be configured in this situation
    # if the --with-newlib option has been given, because otherwise
    # 'target-newlib' will appear in skipdirs.
    ;;
  i[[3456789]]86-*-mingw32*)
    target_configdirs="$target_configdirs target-mingw"
    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"

    # Can't build gdb for mingw32 if not native.
    case "${host}" in
      i[[3456789]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
         ;;
    esac
    ;;    
  *-*-cygwin*)
    target_configdirs="$target_configdirs target-libtermcap target-winsup"
    noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
    # always build newlib.
    skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`

    # Can't build gdb for Cygwin if not native.
    case "${host}" in
      *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
         ;;
    esac
    ;;    
  i[[3456789]]86-*-pe)
    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
    ;;
  i[[3456789]]86-*-sco3.2v5*)
    # The linker does not yet know about weak symbols in COFF,
    # and is not configured to handle mixed ELF and COFF.
    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
    ;;
  i[[3456789]]86-*-sco*)
    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
    ;;
  i[[3456789]]86-*-solaris2*)
    noconfigdirs="$noconfigdirs target-libgloss"
    ;;
  i[[3456789]]86-*-sysv4*)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  i[[3456789]]86-*-beos*)
    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
    ;;
  m32r-*-*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
    ;;
  m68k-*-elf*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  m68k-*-coff*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  mcore-*-pe*)
  # The EPOC C++ environment does not support exceptions or rtti,
  # and so building libstdc++-v3 tends not to always work.
    noconfigdirs="$noconfigdirs target-libstdc++-v3"
    ;;
  mmix-*-*)
    noconfigdirs="$noconfigdirs ${libgcj} gdb libgloss"
    ;;
  mn10200-*-*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  mn10300-*-*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  powerpc-*-aix*)
    # copied from rs6000-*-* entry
    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
    ;;
  powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
    target_configdirs="$target_configdirs target-winsup"
    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
    # always build newlib.
    skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
    ;;
    # This is temporary until we can link against shared libraries
  powerpcle-*-solaris*)
    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
    ;;
  powerpc-*-beos*)
    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
    ;;
  powerpc-*-eabi)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  rs6000-*-lynxos*)
    noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
    ;;
  rs6000-*-aix*)
    noconfigdirs="$noconfigdirs gprof ${libgcj}"
    ;;
  rs6000-*-*)
    noconfigdirs="$noconfigdirs gprof ${libgcj}"
    ;;
  m68k-apollo-*)
    noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
    ;;
  mips*-*-irix5*)
    # The GNU linker does not support shared libraries.
    noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
    ;;
  mips*-*-irix6*)
    # Linking libjava exceeds command-line length limits on at least
    # IRIX 6.2, but not on IRIX 6.5.
    # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
    # <oldham@codesourcery.com>
    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
    ;;
  mips*-dec-bsd*)
    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
    ;;
  mips*-*-bsd*)
    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
    ;;
  mipstx39-*-*)
    noconfigdirs="$noconfigdirs gprof ${libgcj}"   # same as generic mips
    ;;
  mips*-*-linux*)
    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
    ;;
  mips*-*-*)
    noconfigdirs="$noconfigdirs gprof ${libgcj}"
    ;;
  romp-*-*)
    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
    ;;
  sh-*-*)
    case "${host}" in
      i[[3456789]]86-*-vsta) ;; # don't add gprof back in
      i[[3456789]]86-*-go32*) ;; # don't add gprof back in
      i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
      *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
    esac
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  sh64-*-*)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  sparc-*-elf*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  sparc64-*-elf*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  sparclite-*-*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  sparc-*-sunos4*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    if test x${is_cross_compiler} != xno ; then
           noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
    else
           use_gnu_ld=no
    fi
    ;;
  sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
    ;;
  v810-*-*)
    noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
    ;;
  v850-*-*)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  v850e-*-*)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  v850ea-*-*)
    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
    ;;
  vax-*-vms)
    noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
    ;;
  vax-*-*)
    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
    ;;
  xtensa-*-*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
  ip2k-*-*)
    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
    ;;
  *-*-linux*)
    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
    ;;
  *-*-lynxos*)
    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
    ;; 
  *-*-*)
    noconfigdirs="$noconfigdirs ${libgcj}"
    ;;
esac

# If we aren't building newlib, then don't build libgloss, since libgloss
# depends upon some newlib header files.
case "${noconfigdirs}" in
  *target-libgloss*) ;;
  *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
esac

# Figure out what language subdirectories are present.
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
# go away some day.
# NB:  embedded tabs in this IF block -- do not untabify
if test x"${enable_languages+set}" != xset; then
  if test x"${LANGUAGES+set}" = xset; then
    enable_languages="${LANGUAGES}"
      echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
  else
    enable_languages=all
  fi
else
  if test x"${enable_languages}" = x ||
     test x"${enable_languages}" = xyes;
     then
    echo configure.in: --enable-languages needs at least one language argument 1>&2
    exit 1
  fi
fi
enable_languages=`echo "${enable_languages}" | sed -e 's/[[ 	,]][[ 	,]]*/,/g' -e 's/,$//'`

# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
  case ${lang_frag} in
    ..) ;;
    # The odd quoting in the next line works around
    # an apparent bug in bash 1.12 on linux.
    ${srcdir}/gcc/[[*]]/config-lang.in) ;;
    *)
      # From the config-lang.in, get $language, $lang_requires
      language=
      lang_requires=
      . ${lang_frag}
      for other in ${lang_requires} ; do
        case ,${enable_languages}, in
	  *,$other,*) ;;
	  *,all,*) ;;
	  *,$language,*)
	    echo " \`$other' language required by \`$language'; enabling" 1>&2
	    enable_languages="${enable_languages},${other}"
	    ;;
	esac
      done
      ;;
  esac
done

for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
  case ${lang_frag} in
    ..) ;;
    # The odd quoting in the next line works around
    # an apparent bug in bash 1.12 on linux.
    ${srcdir}/gcc/[[*]]/config-lang.in) ;;
    *)
      # From the config-lang.in, get $language, $target_libs, 
      # $lang_dirs, and $build_by_default
      language=
      target_libs=
      lang_dirs=
      build_by_default=
      . ${lang_frag}
      if test "x$language" = x ; then
        echo "${lang_frag} doesn't set \$language." 1>&2
        exit 1
      fi
      case ,${enable_languages}, in
        *,${language},*)
          # Language was explicitly selected; include it.
          add_this_lang=yes
          ;;
        *,all,*)
          # 'all' was selected; include 'default' languages.
          case ${build_by_default} in
            no) add_this_lang=no ;;
            *) add_this_lang=yes ;;
          esac 
          ;;
        *) add_this_lang=no ;;
      esac
      case ${add_this_lang} in
        no)
          # Remove language-dependent dirs.
          eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
          ;;
      esac
      ;;
  esac
done

# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
# $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.

notsupp=""
for dir in . $skipdirs $noconfigdirs ; do
  dirname=`echo $dir | sed -e s/target-//g`
  if test $dir != .  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
    configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
    if test -r $srcdir/$dirname/configure ; then
      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
	true
      else
	notsupp="$notsupp $dir"
      fi
    fi
  fi
  if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
    target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
    if test -r $srcdir/$dirname/configure ; then
      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
	true
      else
	notsupp="$notsupp $dir"
      fi
    fi
  fi
done

# Sometimes the tools are distributed with libiberty but with no other
# libraries.  In that case, we don't want to build target-libiberty.
if test -n "${target_configdirs}" ; then
  others=
  for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
    if test "$i" != "libiberty" ; then
      if test -r $srcdir/$i/configure ; then
	others=yes;
	break;
      fi
    fi
  done
  if test -z "${others}" ; then
    target_configdirs=
  fi
fi

# Quietly strip out all directories which aren't configurable in this tree.
# This relies on all configurable subdirectories being autoconfiscated, which
# is now the case.
configdirs_all="$configdirs"
configdirs=
for i in ${configdirs_all} ; do
  if test -f ${srcdir}/$i/configure ; then
    configdirs="${configdirs} $i"
  fi
done
target_configdirs_all="$target_configdirs"
target_configdirs=
for i in ${target_configdirs_all} ; do
  j=`echo $i | sed -e s/target-//g` 
  if test -f ${srcdir}/$j/configure ; then
    target_configdirs="${target_configdirs} $i"
  fi
done

# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# FSF releases, it's important to let people know when their machine isn't
# supported by the one or two programs in a package.

if test -n "${notsupp}" && test -z "${norecursion}" ; then
  # If $appdirs is non-empty, at least one of those directories must still
  # be configured, or we error out.  (E.g., if the gas release supports a
  # specified target in some subdirs but not the gas subdir, we shouldn't
  # pretend that all is well.)
  if test -n "$appdirs" ; then
    for dir in $appdirs ; do
      if test -r $dir/Makefile.in ; then
	if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
	  appdirs=""
	  break
	fi
	if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
	  appdirs=""
	  break
	fi
      fi
    done
    if test -n "$appdirs" ; then
      echo "*** This configuration is not supported by this package." 1>&2
      exit 1
    fi
  fi
  # Okay, some application will build, or we don't care to check.  Still
  # notify of subdirs not getting built.
  echo "*** This configuration is not supported in the following subdirectories:" 1>&2
  echo "    ${notsupp}" 1>&2
  echo "    (Any other directories should still work fine.)" 1>&2
fi

case "$host" in
  *msdosdjgpp*)
    enable_gdbtk=no ;;
esac

copy_dirs=

# Handle --with-headers=XXX.  If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
  if test x${is_cross_compiler} = xno ; then
    echo 1>&2 '***' --with-headers is only supported when cross compiling
    exit 1
  fi
  if test x"${with_headers}" != xyes ; then
    case "${exec_prefixoption}" in
    "") x=${prefix} ;;
    *) x=${exec_prefix} ;;
    esac
    copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
  fi
fi

# Handle --with-libs=XXX.  If the value is not "yes", the contents of
# the name directories are copied to $(tooldir)/lib.  Multiple directories
# are permitted.
if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
  if test x${is_cross_compiler} = xno ; then
    echo 1>&2 '***' --with-libs is only supported when cross compiling
    exit 1
  fi
  if test x"${with_libs}" != xyes ; then
    # Copy the libraries in reverse order, so that files in the first named
    # library override files in subsequent libraries.
    case "${exec_prefixoption}" in
    "") x=${prefix} ;;
    *) x=${exec_prefix} ;;
    esac
    for l in ${with_libs}; do
      copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
    done
  fi
fi

# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
while test $# != 0 ; do
  if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
    :
  else
    echo Copying $1 to $2

    # Use the install script to create the directory and all required
    # parent directories.
    if test -d $2 ; then
      :
    else
      echo >config.temp
      ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
    fi

    # Copy the directory, assuming we have tar.
    # FIXME: Should we use B in the second tar?  Not all systems support it.
    (cd $1; tar -cf - .) | (cd $2; tar -xpf -)

    # It is the responsibility of the user to correctly adjust all
    # symlinks.  If somebody can figure out how to handle them correctly
    # here, feel free to add the code.

    echo $1 > $2/COPIED
  fi
  shift; shift
done

# Work in distributions that contain no compiler tools, like Autoconf.
tentative_cc=""
host_makefile_frag=/dev/null
if test -d ${srcdir}/config ; then
case "${host}" in
  m68k-hp-hpux*)
    # Avoid "too much defining" errors from HPUX compiler.
    tentative_cc="cc -Wp,-H256000"
    # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
    # If it's HP/UX ar, this should be harmless.
    RANLIB="ar ts"
    ;;
  m68k-apollo-sysv*)
    tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
    ;;
  m68k-apollo-bsd*)
    #None of the Apollo compilers can compile gas or binutils.  The preprocessor
    # chokes on bfd, the compiler won't let you assign integers to enums, and
    # other problems.  Defining CC to gcc is a questionable way to say "don't use
    # the apollo compiler" (the preferred version of GCC could be called cc,
    # or whatever), but I'm not sure leaving CC as cc is any better...
    #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
    # Used to have BISON=yacc.
    tentative_cc=gcc
    ;;
  m88k-dg-dgux*)
    tentative_cc="gcc -Wall -ansi -D__using_DGUX"
    ;;
  m88k-harris-cxux*)
    # Under CX/UX, we want to tell the compiler to use ANSI mode.
    tentative_cc="cc -Xa"
    host_makefile_frag="config/mh-cxux"
    ;;
  m88k-motorola-sysv*)
    ;;
  mips*-dec-ultrix*)
    tentative_cc="cc -Wf,-XNg1000"
    host_makefile_frag="config/mh-decstation"
    ;;
  mips*-nec-sysv4*)
    # The C compiler on NEC MIPS SVR4 needs bigger tables.
    tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
    host_makefile_frag="config/mh-necv4"
    ;;
  mips*-sgi-irix4*)
    # Tell compiler to use K&R C.  We can't compile under the SGI Ansi
    # environment.  Also bump switch table size so that cp-parse will
    # compile.  Bump string length limit so linker builds.
    tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
    ;;
  mips*-*-sysv4*)
    host_makefile_frag="config/mh-sysv4"
    ;;
  mips*-*-sysv*)
    # This is for a MIPS running RISC/os 4.52C.

    # This is needed for GDB, but needs to be in the top-level make because
    # if a library is compiled with the bsd headers and gets linked with the
    # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
    # a different size).
    # ptrace(2) apparently has problems in the BSD environment.  No workaround is
    # known except to select the sysv environment.  Could we use /proc instead?
    # These "sysv environments" and "bsd environments" often end up being a pain.
    #
    # This is not part of CFLAGS because perhaps not all C compilers have this
    # option.
    tentative_cc="cc -systype sysv"
    ;;
  i370-ibm-opened*)
    tentative_cc="c89"
    ;;
  i[[3456789]]86-*-sysv5*)
    host_makefile_frag="config/mh-sysv5"
    ;;
  i[[3456789]]86-*-dgux*)
    tentative_cc="gcc -Wall -ansi -D__using_DGUX"
    host_makefile_frag="config/mh-dgux386"
    ;;
  i[[3456789]]86-ncr-sysv4.3*)
    # The MetaWare compiler will generate a copyright message unless you
    # turn it off by adding the -Hnocopyr flag.
    tentative_cc="cc -Hnocopyr"
    ;;
  i[[3456789]]86-ncr-sysv4*)
    # for an NCR 3000 (i486/SVR4) system.
    # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
    # This compiler not only emits obnoxious copyright messages every time
    # you run it, but it chokes and dies on a whole bunch of GNU source
    # files.  Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
    tentative_cc="/usr/ccs/ATT/cc"
    host_makefile_frag="config/mh-ncr3000"
    ;;
  i[[3456789]]86-*-sco3.2v5*)
    ;;
  i[[3456789]]86-*-sco*)
    # The native C compiler botches some simple uses of const.  Unfortunately,
    # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
    tentative_cc="cc -Dconst="
    host_makefile_frag="config/mh-sco"
    ;;
  i[[3456789]]86-*-udk*)
    host_makefile_frag="config/mh-sysv5"
    ;;
  i[[3456789]]86-*-solaris2*)
    host_makefile_frag="config/mh-sysv4"
    ;;
  i[[3456789]]86-*-msdosdjgpp*)
    host_makefile_frag="config/mh-djgpp"
    ;;
  *-cygwin*)
    host_makefile_frag="config/mh-cygwin"
    ;;
  *-mingw32*)
    host_makefile_frag="config/mh-mingw32"
    ;;
  *-interix*)
    host_makefile_frag="config/mh-interix"
    ;;
  vax-*-ultrix2*)
    # The old BSD pcc isn't up to compiling parts of gdb so use gcc
    tentative_cc=gcc
    ;;
  *-*-solaris2*)
    host_makefile_frag="config/mh-solaris"
    ;;
  m68k-sun-sunos*)
    # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
    # without overflowing the jump tables (-J says to use a 32 bit table)
    tentative_cc="cc -J"
    ;;
  *-hp-hpux*)
    tentative_cc="cc -Wp,-H256000"
    ;;
  *-*-hiux*)
    tentative_cc="cc -Wp,-H256000"
    ;;
  rs6000-*-lynxos*)
    # /bin/cc is less than useful for our purposes.  Always use GCC
    tentative_cc="/usr/cygnus/progressive/bin/gcc"
    host_makefile_frag="config/mh-lynxrs6k"
    ;;
  *-*-lynxos*)
    # /bin/cc is less than useful for our purposes.  Always use GCC
    tentative_cc="/bin/gcc"
    ;;
  *-*-sysv4*)
    host_makefile_frag="config/mh-sysv4"
    ;;
esac
fi

extra_arflags_for_target=
extra_nmflags_for_target=
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
  i[[3456789]]86-*-netware*)
    target_makefile_frag="config/mt-netware"
    ;;
  powerpc-*-netware*)
    target_makefile_frag="config/mt-netware"
    ;;
  *-*-linux*)
    target_makefile_frag="config/mt-linux"
    ;;
  *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
    # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm 
    # commands to handle both 32-bit and 64-bit objects.  These flags are
    # harmless if we're using GNU nm or ar.
    extra_arflags_for_target=" -X32_64"
    extra_nmflags_for_target=" -B -X32_64"
    ;;
  *-*-darwin*)
    # ranlib from Darwin requires the -c flag to look at common symbols.
    extra_ranlibflags_for_target=" -c"
    ;;
  mips*-*-pe | sh*-*-pe | *arm-wince-pe)
    target_makefile_frag="config/mt-wince"
    ;;
esac

alphaieee_frag=/dev/null
case $target in
  alpha*-*-*)
    # This just makes sure to use the -mieee option to build target libs.
    # This should probably be set individually by each library.
    alphaieee_frag="config/mt-alphaieee"
    ;;
esac

# If --enable-target-optspace always use -Os instead of -O2 to build
# the target libraries, similarly if it is not specified, use -Os
# on selected platforms.
ospace_frag=/dev/null
case "${enable_target_optspace}:${target}" in
  yes:*)
    ospace_frag="config/mt-ospace"
    ;;
  :d30v-*)
    ospace_frag="config/mt-d30v"
    ;;
  :m32r-* | :d10v-* | :fr30-*)
    ospace_frag="config/mt-ospace"
    ;;
  no:* | :*)
    ;;
  *)
    echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
    ;;
esac

# Set with_gnu_as and with_gnu_ld as appropriate.
#
# This is done by determining whether or not the appropriate directory
# is available, and by checking whether or not specific configurations
# have requested that this magic not happen.
# 
# The command line options always override the explicit settings in 
# configure.in, and the settings in configure.in override this magic.
#
# If the default for a toolchain is to use GNU as and ld, and you don't 
# want to do that, then you should use the --without-gnu-as and
# --without-gnu-ld options for the configure script.

if test x${use_gnu_as} = x &&
   echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
  with_gnu_as=yes
  extra_host_args="$extra_host_args --with-gnu-as"
fi

if test x${use_gnu_ld} = x &&
   echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
  with_gnu_ld=yes
  extra_host_args="$extra_host_args --with-gnu-ld"
fi

# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
# can detect this case.

if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
  with_newlib=yes
  extra_host_args="$extra_host_args --with-newlib"
fi


# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
  case "${target}" in
  mips*-*-irix6*)
    ;;
  mips*-*-* | alpha*-*-osf*)
    with_stabs=yes;
    extra_host_args="${extra_host_args} --with-stabs"
    ;;
  esac
fi

# hpux11 in 64bit mode has libraries in a weird place.  Arrange to find
# them automatically.
case "${host}" in
  hppa*64*-*-hpux11*)	
    extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
    ;;
esac

# If we aren't going to be using gcc, see if we can extract a definition
# of CC from the fragment.
# Actually, use the 'pre-extracted' version above.
if test -z "${CC}" && test "${build}" = "${host}" ; then
  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
  found=
  for dir in $PATH; do
    test -z "$dir" && dir=.
    if test -f $dir/gcc; then
      found=yes
      break
    fi
  done
  IFS="$save_ifs"
  if test -z "${found}" && test -n "${tentative_cc}" ; then
    CC=$tentative_cc
  fi
fi

# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}

# Generate a default definition for YACC.  This is used if the makefile can't
# locate bison or byacc in objdir.

for prog in 'bison -y' byacc yacc
do
  set dummy $prog; tmp=$2
  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
  for dir in $PATH; do
    test -z "$dir" && dir=.
    if test -f $dir/$tmp; then
      DEFAULT_YACC="$prog"
      break
    fi
  done
  IFS="$save_ifs"

  test -n "$DEFAULT_YACC" && break
done

# Generate a default definition for M4.  This is used if the makefile can't
# locate m4 in objdir.

for prog in gm4 gnum4 m4
do
  set dummy $prog; tmp=$2
  IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}:"
  for dir in $PATH; do
    test -z "$dir" && dir=.
    if test -f $dir/$tmp; then
      DEFAULT_M4="$prog"
      break
    fi
  done
  IFS="$save_ifs"

  test -n "$DEFAULT_M4" && break
done

# Generate a default definition for LEX.  This is used if the makefile can't
# locate flex in objdir.

for prog in flex lex
do
  set dummy $prog; tmp=$2
  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
  for dir in $PATH; do
    test -z "$dir" && dir=.
    if test -f $dir/$tmp; then
      DEFAULT_LEX="$prog"
      break
    fi
  done
  IFS="$save_ifs"

  test -n "$DEFAULT_LEX" && break
done

if test "${build}" != "${host}" ; then
  # If we are doing a Canadian Cross, in which the host and build systems
  # are not the same, we set reasonable default values for the tools.

  BISON=${BISON-bison}
  CC=${CC-${host_alias}-gcc}
  CFLAGS=${CFLAGS-"-g -O2"}
  CXX=${CXX-${host_alias}-c++}
  CXXFLAGS=${CXXFLAGS-"-g -O2"}
  CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
  CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
  CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
  GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
  GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
  BUILD_PREFIX=${build_alias}-
  BUILD_PREFIX_1=${build_alias}-
  MAKEINFO=${MAKEINFO-makeinfo}

  if test -z "${YACC}" ; then
    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
    for dir in $PATH; do
      test -z "$dir" && dir=.
      if test -f $dir/bison; then
	YACC="bison -y"
	break
      fi
      if test -f $dir/byacc; then
	YACC=byacc
	break
      fi
      if test -f $dir/yacc; then
	YACC=yacc
	break
      fi
    done
    IFS="$save_ifs"
    if test -z "${YACC}" ; then
      YACC="bison -y"
    fi
  fi

  if test -z "${LEX}" ; then
    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
    for dir in $PATH; do
      test -z "$dir" && dir=.
      if test -f $dir/flex; then
	LEX=flex
	break
      fi
      if test -f $dir/lex; then
	LEX=lex
	break
      fi
    done
    IFS="$save_ifs"
    LEX=${LEX-flex}
  fi

else
  # Set reasonable default values for some tools even if not Canadian.
  # Of course, these are different reasonable default values, originally
  # specified directly in the Makefile.
  # We don't export, so that autoconf can do its job.
  # Note that all these settings are above the fragment inclusion point
  # in Makefile.in, so can still be overridden by fragments.
  # This is all going to change when we autoconfiscate...

  BISON="\$(USUAL_BISON)"
  CC_FOR_BUILD="\$(CC)"
  GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
  BUILD_PREFIX=
  BUILD_PREFIX_1=loser-
  MAKEINFO="\$(USUAL_MAKEINFO)"
  LEX="\$(USUAL_LEX)"
  YACC="\$(USUAL_YACC)"

  # If CC is still not set, try to get gcc.
  cc_prog_is_gcc=
  if test -z "${CC}" ; then
    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
    for dir in $PATH; do
      test -z "$dir" && dir=.
      if test -f $dir/gcc; then
	CC="gcc"
	cc_prog_is_gcc=yes
	echo 'void f(){}' > conftest.c
	if test -z "`${CC} -g -c conftest.c 2>&1`"; then
	  CFLAGS=${CFLAGS-"-g -O2"}
	  CXXFLAGS=${CXXFLAGS-"-g -O2"}
	else
	  CFLAGS=${CFLAGS-"-O2"}
	  CXXFLAGS=${CXXFLAGS-"-O2"}
	fi
	rm -f conftest*
	break
      fi
    done
    IFS="$save_ifs"
    CC=${CC-cc}
  else
    # Determine if we are using gcc.
    cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
    if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
      cc_prog_is_gcc=yes
    fi
    rm -f conftest.c
    if test -z "${CFLAGS}"; then
      # Here CC is set but CFLAGS is not.  Use a quick hack to use -O2 if CC
      # is set to a version of gcc.
      if test "$cc_prog_is_gcc" = yes; then
	echo 'void f(){}' > conftest.c
	if test -z "`${CC} -g -c conftest.c 2>&1`"; then
	  CFLAGS=${CFLAGS-"-g -O2"}
	  CXXFLAGS=${CXXFLAGS-"-g -O2"}
	else
	  CFLAGS=${CFLAGS-"-O2"}
	  CXXFLAGS=${CXXFLAGS-"-O2"}
	fi
	rm -f conftest*
      fi
    fi
  fi

  # We must set the default linker to the linker used by gcc for the correct
  # operation of libtool.  If LD is not defined and we are using gcc, try to
  # set the LD default to the ld used by gcc.
  if test -z "$LD"; then
    if test "$cc_prog_is_gcc" = yes; then
      case $build in
      *-*-mingw*)
	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
      *)
	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
      esac
      case $gcc_prog_ld in
      # Accept absolute paths.
      [[\\/]* | [A-Za-z]:[\\/]*)]
        LD="$gcc_prog_ld" ;;
      esac
    fi
  fi

  CXX=${CXX-"c++"}
  CFLAGS=${CFLAGS-"-g"}
  CXXFLAGS=${CXXFLAGS-"-g -O2"}
fi

# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
# Set up the list of links to be made.
# ${links} is the list of link names, and ${files} is the list of names to link to.

# Make the links.
configlinks="${links}"
if test -r ./config.status  ; then
  mv -f ./config.status ./config.back
fi
while test -n "${files}" ; do
  # set file to car of files, files to cdr of files
  set ${files}; file=$1; shift; files=$*
  set ${links}; link=$1; shift; links=$*

  if test ! -r ${srcdir}/${file} ; then
    if test ! -r ${file} ; then
      echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
      echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
      exit 1
    else
      srcfile=${file}
    fi
  else
    srcfile=${srcdir}/${file}
  fi

  ${remove} -f ${link}
  # Make a symlink if possible, otherwise try a hard link
  if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
    true
  else
    # We need to re-remove the file because Lynx leaves a 
    # very strange directory there when it fails an NFS symlink.
    ${remove} -r -f ${link}
    ${hard_link} ${srcfile} ${link}
  fi
  if test ! -r ${link} ; then
    echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
    exit 1
  fi

  echo "Linked \"${link}\" to \"${srcfile}\"."
done

# Create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.

if test -r ${srcdir}/.gdbinit ; then
  case ${srcdir} in
    .) ;;
    *) cat > ./.gdbinit <<EOF
# ${NO_EDIT}
dir ${srcdir}
dir .
source ${srcdir}/.gdbinit
EOF
    ;;
  esac
fi

# Make sure that the compiler is able to generate an executable.  If it
# can't, we are probably in trouble.  We don't care whether we can run the
# executable--we might be using a cross compiler--we only care whether it
# can be created.  At this point the main configure script has set CC.
we_are_ok=no
echo "int main () { return 0; }" > conftest.c
${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c
if test $? = 0 ; then
  if test -s conftest || test -s conftest.exe ; then
    we_are_ok=yes
  fi
fi 
case $we_are_ok in
  no)
    echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
    echo 1>&2 "*** You must set the environment variable CC to a working compiler."
    rm -f conftest*
    exit 1
    ;;
esac
rm -f conftest*

# The Solaris /usr/ucb/cc compiler does not appear to work.
case "${host}" in
  sparc-sun-solaris2*)
      CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
      if test "`type $CCBASE | sed 's/^[[^/]]*//'`" = "/usr/ucb/cc" ; then
          could_use=
          test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
          if test -d /opt/cygnus/bin ; then
              if test "$could_use" = "" ; then
                  could_use="/opt/cygnus/bin"
              else
                  could_use="$could_use or /opt/cygnus/bin"
              fi
          fi
        if test "$could_use" = "" ; then
            echo "Warning: compilation may fail because you're using"
            echo "/usr/ucb/cc.  You should change your PATH or CC "
            echo "variable and rerun configure."
        else
            echo "Warning: compilation may fail because you're using"
            echo "/usr/ucb/cc, when you should use the C compiler from"
            echo "$could_use.  You should change your"
            echo "PATH or CC variable and rerun configure."
        fi
      fi
  ;;
esac

# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
# binutils tools will find libbfd.so.
case "${enable_shared}" in
  no | "") SET_LIB_PATH= ;;
  *) SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)" ;;
esac

case "${host}" in
  *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
  *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac

# Record target_configdirs and the configure arguments for target and
# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`

# This is the final value for target_configdirs.  configdirs already
# has its final value, as does build_modules.  It's time to create some 
# lists of valid targets.

all_build_modules=
configure_build_modules=
for module in ${build_modules} ; do
  all_build_modules=all-build-${module}
  configure_build_modules=configure-build-${module}
done

# Determine whether gdb needs tk/tcl or not.
# Use 'maybe' since enable_gdbtk might be true even if tk isn't available
# and in that case we want gdb to be built without tk.  Ugh!
# In fact I believe gdb is the *only* package directly dependent on tk,
# so we should be able to put the 'maybe's in unconditionally and
# leave out the maybe dependencies when enable_gdbtk is false.  I'm not
# 100% sure that that's safe though.

gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
case "$enable_gdbtk" in
  no)
    GDB_TK="" ;;
  yes)
    GDB_TK="${gdb_tk}" ;;
  *)
    # Only add the dependency on gdbtk when GDBtk is part of the gdb
    # distro.  Eventually someone will fix this and move Insight, nee
    # gdbtk to a separate directory.
    if test -d ${srcdir}/gdb/gdbtk ; then
      GDB_TK="${gdb_tk}"
    else
      GDB_TK=""
    fi
    ;;
esac

# Create the 'maybe dependencies'.  This uses a temporary file.

# While at that, we remove Makefiles if we were started for recursive
# configuration, so that the top-level Makefile reconfigures them,
# like we used to do when configure itself was recursive.
rm -f maybedep.tmp
echo '# maybedep.tmp' > maybedep.tmp

# Make-targets which may need maybe dependencies.
mts="configure all install check clean distclean dvi info install-info"
mts="${mts} installcheck mostlyclean maintainer-clean TAGS"

# Loop over modules and make-targets.
for module in ${build_modules} ; do
  if test -z "${no_recursion}" \
     && test -f ${build_subdir}/${module}/Makefile; then
    echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
    rm -f ${build_subdir}/${module}/Makefile
  fi
  for mt in ${mts} ; do
    case ${mt} in
      install) ;; # No installing build modules.
      *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
    esac
  done
done
for module in ${configdirs} ; do
  if test -z "${no_recursion}" \
     && test -f ${module}/Makefile; then
    echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
    rm -f ${module}/Makefile
  fi
  for mt in ${mts} ; do
    echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
  done
done
for module in ${target_configdirs} ; do
  if test -z "${no_recursion}" \
     && test -f ${target_subdir}/${module}/Makefile; then
    echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
    rm -f ${target_subdir}/${module}/Makefile
  fi
  for mt in ${mts} ; do
    echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
  done
done
maybe_dependencies=maybedep.tmp
AC_SUBST_FILE(maybe_dependencies)

# Create the serialization dependencies.  This uses a temporary file.

AC_ARG_ENABLE([serial-configure],
[  --enable-serial-[{host,target,build}-]configure
                          Force sequential configuration of
                          sub-packages for the host, target or build
			  machine, or all sub-packages])

case ${enable_serial_configure} in
  yes)
    enable_serial_build_configure=yes
    enable_serial_host_configure=yes
    enable_serial_target_configure=yes
    ;;
esac

# These force 'configure's to be done one at a time, to avoid problems
# with contention over a shared config.cache.
rm -f serdep.tmp
echo '# serdep.tmp' > serdep.tmp
olditem=
test "x${enable_serial_build_configure}" = xyes &&
for item in ${build_configdirs} ; do
  case ${olditem} in
    "") ;;
    *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
  esac
  olditem=${item}
done
olditem=
test "x${enable_serial_host_configure}" = xyes &&
for item in ${configdirs} ; do
  case ${olditem} in
    "") ;;
    *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
  esac
  olditem=${item}
done
olditem=
test "x${enable_serial_target_configure}" = xyes &&
for item in ${target_configdirs} ; do
  case ${olditem} in
    "") ;;
    *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
  esac
  olditem=${item}
done
serialization_dependencies=serdep.tmp
AC_SUBST_FILE(serialization_dependencies)

# Base args.  Strip norecursion, cache-file, srcdir, host, build,
# target and nonopt.  These are the ones we might not want to pass
# down to subconfigures.  Also strip program-prefix, program-suffix,
# and program-transform-name, so that we can pass down a consistent
# program-transform-name.  If autoconf has put single quotes around
# any of these arguments (because they contain shell metacharacters)
# then this will fail; in practice this only happens for
# --program-transform-name, so be sure to override --program-transform-name
# at the end of the argument list.
# These will be expanded by make, so quote '$'.
cat <<\EOF_SED > conftestsed
s/ --no[[^ ]]* / /
s/ --c[[a-z-]]*[[= ]][[^ ]]* / /
s/ --sr[[a-z-]]*[[= ]][[^ ]]* / /
s/ --ho[[a-z-]]*[[= ]][[^ ]]* / /
s/ --bu[[a-z-]]*[[= ]][[^ ]]* / /
s/ --t[[a-z-]]*[[= ]][[^ ]]* / /
s/ --program-[[pst]][[a-z-]]*[[= ]][[^ ]]* / /
s/ -cache-file[[= ]][[^ ]]* / /
s/ -srcdir[[= ]][[^ ]]* / /
s/ -host[[= ]][[^ ]]* / /
s/ -build[[= ]][[^ ]]* / /
s/ -target[[= ]][[^ ]]* / /
s/ -program-prefix[[= ]][[^ ]]* / /
s/ -program-suffix[[= ]][[^ ]]* / /
s/ -program-transform-name[[= ]][[^ ]]* / /
s/ [[^' -][^ ]*] / /
s/^ *//;s/ *$//
s,\$,$$,g
EOF_SED
sed -f conftestsed <<EOF_SED > conftestsed.out
 ${ac_configure_args} 
EOF_SED
baseargs=`cat conftestsed.out`
rm -f conftestsed conftestsed.out

# Add in --program-transform-name, after --program-prefix and
# --program-suffix have been applied to it.  Autoconf has already
# doubled dollar signs and backslashes in program_transform_name; we want
# the backslashes un-doubled, and then the entire thing wrapped in single
# quotes, because this will be expanded first by make and then by the shell. 
# Also, because we want to override the logic in subdir configure scripts to
# choose program_transform_name, replace any s,x,x, with s,y,y,.
sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
${program_transform_name}
EOF_SED
gcc_transform_name=`cat conftestsed.out`
rm -f conftestsed.out
baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"

# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file.  Multilibs are neither needed nor
# desired.
build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"

# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
"") # empty
  cache_file_option="" ;;
/* | [[A-Za-z]]:[[\\/]]* ) # absolute path
  cache_file_option="--cache-file=${cache_file}" ;;
*) # relative path
  cache_file_option="--cache-file=../${cache_file}" ;;
esac

# Host dirs don't like to share a cache file either, horribly enough.
# This seems to be due to autoconf 2.5x stupidity.
host_configargs="--cache-file=./config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"

target_configargs=${baseargs}

# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
# native.  However, it would be better to use other mechanisms to make the
# sorts of decisions they want to make on this basis.  Please consider
# this option to be deprecated.  FIXME.
if test x${is_cross_compiler} = xyes ; then
  target_configargs="--with-cross-host=${host_alias} ${target_configargs}"
fi

# Default to --enable-multilib.
if test x${enable_multilib} = x ; then
  target_configargs="--enable-multilib ${target_configargs}"
fi

# Pass --with-newlib if appropriate.  Note that target_configdirs has
# changed from the earlier setting of with_newlib.
if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
  target_configargs="--with-newlib ${target_configargs}"
fi

# Different target subdirs use different values of certain variables
# (notably CXX).  Worse, multilibs use *lots* of different values.
# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
# it doesn't automatically accept command-line overrides of them.
# This means it's not safe for target subdirs to share a cache file,
# which is disgusting, but there you have it.  Hopefully this can be
# fixed in future.  It's still worthwhile to use a cache file for each
# directory.  I think.

# Pass the appropriate --host, --build, and --cache-file arguments.
target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"

# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
# the gcc and libstdc++-v3 subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
case "${with_gxx_include_dir}" in
  yes)
    AC_MSG_ERROR([--with-gxx-include-dir=[[dir]] requires a directory])
    ;;
  no | "")
    case "${enable_version_specific_runtime_libs}" in
      yes) gxx_include_dir='${libsubdir}/include/c++' ;;
      *)
        . ${srcdir}/config.if
        gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
    esac ;;
  *) gxx_include_dir=${with_gxx_include_dir} ;;
esac

FLAGS_FOR_TARGET=
case " $target_configdirs " in
 *" newlib "*)
  case " $target_configargs " in
  *" --with-newlib "*)
   case "$target" in
   *-cygwin*)
     FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
   esac

   # If we're not building GCC, don't discard standard headers.
   if test -d ${srcdir}/gcc; then
     FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'

     if test "${build}" != "${host}"; then
       # On Canadian crosses, CC_FOR_TARGET will have already been set
       # by `configure', so we won't have an opportunity to add -Bgcc/
       # to it.  This is right: we don't want to search that directory
       # for binaries, but we want the header files in there, so add
       # them explicitly.
       FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'

       # Someone might think of using the pre-installed headers on
       # Canadian crosses, in case the installed compiler is not fully
       # compatible with the compiler being built.  In this case, it
       # would be better to flag an error than risking having
       # incompatible object files being constructed.  We can't
       # guarantee that an error will be flagged, but let's hope the
       # compiler will do it, when presented with incompatible header
       # files.
     fi
   fi

   case "${target}-${is_cross_compiler}" in
   i[[3456789]]86-*-linux*-no)
      # Here host == target, so we don't need to build gcc,
      # so we don't want to discard standard headers.
      FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
      ;;
   *)
      # If we're building newlib, use its generic headers last, but search
      # for any libc-related directories first (so make it the last -B
      # switch).
      FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
      ;;
   esac
   ;;
  esac
  ;;
esac

# Allow the user to override the flags for
# our build compiler if desired.
CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}

# On Canadian crosses, we'll be searching the right directories for
# the previously-installed cross compiler, so don't bother to add
# flags for directories within the install tree of the compiler
# being built; programs in there won't even run.
if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
  # Search for pre-installed headers if nothing else fits.
  FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
fi

if test "x${use_gnu_ld}" = x &&
   echo " ${configdirs} " | grep " ld " > /dev/null ; then
  # Arrange for us to find uninstalled linker scripts.
  FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
fi

if test "x${CC_FOR_TARGET+set}" = xset; then
  :
elif test -d ${srcdir}/gcc; then
  CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
elif test "$host" = "$target"; then
  CC_FOR_TARGET='$(CC)'
else
  CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
fi
CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'

if test "x${GCJ_FOR_TARGET+set}" = xset; then
  :
elif test -d ${srcdir}/gcc; then
  GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
elif test "$host" = "$target"; then
  GCJ_FOR_TARGET='gcj'
else
  GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
fi
GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'

# Don't use libstdc++-v3's flags to configure/build itself.
libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'

if test "x${CXX_FOR_TARGET+set}" = xset; then
  if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
    RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
  fi
elif test -d ${srcdir}/gcc; then
  # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
  # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
  # default whereas gcc does not.
  # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
  # all other cases.
  CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
  RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
elif test "$host" = "$target"; then
  CXX_FOR_TARGET='$(CXX)'
  RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
else
  CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
  RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
fi
CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'

qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[[&%]],\\\&,g'`
qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[[&%]],\\\&,g'`

# We want to defer the evaluation of `cmd`s and shell variables in
# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
# bootstrap.  We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
# quotes, but we still have to duplicate `$'s so that shell variables
# can be expanded by the nested make as shell variables, not as make
# macros.
qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'`
qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'`

# Wrap CC_FOR_TARGET and friends, for certain types of builds.
CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"

# Makefile fragments.
host_makefile_frag=${srcdir}/${host_makefile_frag}
target_makefile_frag=${srcdir}/${target_makefile_frag}
alphaieee_frag=${srcdir}/${alphaieee_frag}
ospace_frag=${srcdir}/${ospace_frag}
AC_SUBST_FILE(host_makefile_frag)
AC_SUBST_FILE(target_makefile_frag)
AC_SUBST_FILE(alphaieee_frag)
AC_SUBST_FILE(ospace_frag)

# Miscellanea: directories, flags, etc.
AC_SUBST(SET_LIB_PATH)
AC_SUBST(RPATH_ENVVAR)
AC_SUBST(BUILD_PREFIX)
AC_SUBST(BUILD_PREFIX_1)
AC_SUBST(configlinks)
AC_SUBST(gcc_version_trigger)
AC_SUBST(gcc_version)
AC_SUBST(tooldir)
AC_SUBST(build_tooldir)
AC_SUBST(GDB_TK)
AC_SUBST(gxx_include_dir)
AC_SUBST(libstdcxx_incdir)

# Build module lists & subconfigure args.
AC_SUBST(build_configargs)
AC_SUBST(configure_build_modules)
AC_SUBST(all_build_modules)

# Host module lists & subconfigure args.
AC_SUBST(host_configargs)
AC_SUBST(configdirs)

# Target module lists & subconfigure args.
AC_SUBST(target_configargs)
AC_SUBST(target_configdirs)

# Build tools.
AC_SUBST(BISON)
AC_SUBST(CC_FOR_BUILD)
AC_SUBST(LEX)
AC_SUBST(MAKEINFO)
AC_SUBST(YACC)
AC_SUBST(config_shell)

# Host tools.
NCN_STRICT_CHECK_TOOL(AR, ar)
NCN_STRICT_CHECK_TOOL(AS, as)
NCN_STRICT_CHECK_TOOL(DLLTOOL, dlltool)
NCN_STRICT_CHECK_TOOL(LD, ld)
NCN_STRICT_CHECK_TOOL(NM, nm)
NCN_STRICT_CHECK_TOOL(RANLIB, ranlib, :)
NCN_STRICT_CHECK_TOOL(WINDRES, windres)
NCN_STRICT_CHECK_TOOL(OBJCOPY, objcopy)
NCN_STRICT_CHECK_TOOL(OBJDUMP, objdump)
AC_SUBST(CC)
AC_SUBST(CXX)
AC_SUBST(CFLAGS)
AC_SUBST(CFLAGS_FOR_BUILD)
AC_SUBST(CXXFLAGS)
AC_SUBST(DEFAULT_YACC)
AC_SUBST(DEFAULT_LEX)
AC_SUBST(DEFAULT_M4)

# Target tools.
NCN_STRICT_CHECK_TARGET_TOOL(AR_FOR_TARGET, ar)
NCN_STRICT_CHECK_TARGET_TOOL(AS_FOR_TARGET, as)
NCN_STRICT_CHECK_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
NCN_STRICT_CHECK_TARGET_TOOL(LD_FOR_TARGET, ld)
NCN_STRICT_CHECK_TARGET_TOOL(NM_FOR_TARGET, nm)
NCN_STRICT_CHECK_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib, :)
NCN_STRICT_CHECK_TARGET_TOOL(WINDRES_FOR_TARGET, windres)

AC_SUBST(GCC_FOR_TARGET)
AC_SUBST(FLAGS_FOR_TARGET)
AC_SUBST(CC_FOR_TARGET)
AC_SUBST(GCJ_FOR_TARGET)
AC_SUBST(CXX_FOR_TARGET)
AC_SUBST(RAW_CXX_FOR_TARGET)
AC_SUBST(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)
AC_SUBST(RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)

# Fix up target tools.
if test "x${build}" = "x${host}" ; then
  # In this case, the newly built tools can and should be used,
  # so we override the results of the autoconf tests.
  # This should really only happen when the tools are actually being built,
  # but that's a further refinement.  The new build scheme, where
  # tools are built into a structure paralleling where they're installed,
  # should also eliminate all of this cleanly.
  AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
  AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
  DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
  LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
  NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
  RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
  WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
fi
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}

AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
AC_ARG_ENABLE(maintainer-mode,
[  --enable-maintainer-mode enable make rules and dependencies not useful
                          (and sometimes confusing) to the casual installer],
      USE_MAINTAINER_MODE=$enableval,
      USE_MAINTAINER_MODE=no)
AC_MSG_RESULT($USE_MAINTAINER_MODE)
AC_SUBST(MAINTAINER_MODE_TRUE)
AC_SUBST(MAINTAINER_MODE_FALSE)
if test "$USE_MAINTAINER_MODE" = yes; then
  MAINTAINER_MODE_TRUE=
  MAINTAINER_MODE_FALSE='#'
else
  MAINTAINER_MODE_TRUE='#'
  MAINTAINER_MODE_FALSE=
fi	
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl

AC_OUTPUT(Makefile)