Next: , Previous: Debugging Options, Up: Invoking GCC


3.10 Options That Control Optimization

These options control various sorts of optimizations.

Without any optimization option, the compiler's goal is to reduce the cost of compilation and to make debugging produce the expected results. Statements are independent: if you stop the program with a breakpoint between statements, you can then assign a new value to any variable or change the program counter to any other statement in the function and get exactly the results you would expect from the source code.

Turning on optimization flags makes the compiler attempt to improve the performance and/or code size at the expense of compilation time and possibly the ability to debug the program.

The compiler performs optimization based on the knowledge it has of the program. Optimization levels -O and above, in particular, enable unit-at-a-time mode, which allows the compiler to consider information gained from later functions in the file when compiling a function. Compiling multiple files at once to a single output file in unit-at-a-time mode allows the compiler to use information gained from all of the files when compiling each of them.

Not all optimizations are controlled directly by a flag. Only optimizations that have a flag are listed.

-O
-O1
Optimize. Optimizing compilation takes somewhat more time, and a lot more memory for a large function.

With -O, the compiler tries to reduce code size and execution time, without performing any optimizations that take a great deal of compilation time.

-O turns on the following optimization flags:

          -fauto-inc-dec 
          -fcprop-registers 
          -fdce 
          -fdefer-pop 
          -fdelayed-branch 
          -fdse 
          -fguess-branch-probability 
          -fif-conversion2 
          -fif-conversion 
          -finline-small-functions 
          -fipa-pure-const 
          -fipa-reference 
          -fmerge-constants
          -fsplit-wide-types 
          -ftree-ccp 
          -ftree-ch 
          -ftree-copyrename 
          -ftree-dce 
          -ftree-dominator-opts 
          -ftree-dse 
          -ftree-fre 
          -ftree-sra 
          -ftree-ter 
          -funit-at-a-time
     

-O also turns on -fomit-frame-pointer on machines where doing so does not interfere with debugging.

-O2
Optimize even more. GCC performs nearly all supported optimizations that do not involve a space-speed tradeoff. The compiler does not perform loop unrolling or function inlining when you specify -O2. As compared to -O, this option increases both compilation time and the performance of the generated code.

-O2 turns on all optimization flags specified by -O. It also turns on the following optimization flags:

          -fthread-jumps 
          -falign-functions  -falign-jumps 
          -falign-loops  -falign-labels 
          -fcaller-saves 
          -fcrossjumping 
          -fcse-follow-jumps  -fcse-skip-blocks 
          -fdelete-null-pointer-checks 
          -fexpensive-optimizations 
          -fgcse  -fgcse-lm  
          -foptimize-sibling-calls 
          -fpeephole2 
          -fregmove 
          -freorder-blocks  -freorder-functions 
          -frerun-cse-after-loop  
          -fsched-interblock  -fsched-spec 
          -fschedule-insns  -fschedule-insns2 
          -fstrict-aliasing -fstrict-overflow 
          -ftree-pre 
          -ftree-vrp
     

Please note the warning under -fgcse about invoking -O2 on programs that use computed gotos.

-O3
Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-functions, -funswitch-loops, -fpredictive-commoning and -fgcse-after-reload options.
-O0
Reduce compilation time and make debugging produce the expected results. This is the default.
-Os
Optimize for size. -Os enables all -O2 optimizations that do not typically increase code size. It also performs further optimizations designed to reduce code size.

-Os disables the following optimization flags:

          -falign-functions  -falign-jumps  -falign-loops 
          -falign-labels  -freorder-blocks  -freorder-blocks-and-partition 
          -fprefetch-loop-arrays  -ftree-vect-loop-version
     

If you use multiple -O options, with or without level numbers, the last such option is the one that is effective.

Options of the form -fflag specify machine-independent flags. Most flags have both positive and negative forms; the negative form of -ffoo would be -fno-foo. In the table below, only one of the forms is listed—the one you typically will use. You can figure out the other form by either removing `no-' or adding it.

The following options control specific optimizations. They are either activated by -O options or are related to ones that are. You can use the following flags in the rare cases when “fine-tuning” of optimizations to be performed is desired.

-fno-default-inline
Do not make member functions inline by default merely because they are defined inside the class scope (C++ only). Otherwise, when you specify -O, member functions defined inside class scope are compiled inline by default; i.e., you don't need to add `inline' in front of the member function name.
-fno-defer-pop
Always pop the arguments to each function call as soon as that function returns. For machines which must pop arguments after a function call, the compiler normally lets arguments accumulate on the stack for several function calls and pops them all at once.

Disabled at levels -O, -O2, -O3, -Os.

-fforward-propagate
Perform a forward propagation pass on RTL. The pass tries to combine two instructions and checks if the result can be simplified. If loop unrolling is active, two passes are performed and the second is scheduled after loop unrolling.

This option is enabled by default at optimization levels -O2, -O3, -Os.

-fomit-frame-pointer
Don't keep the frame pointer in a register for functions that don't need one. This avoids the instructions to save, set up and restore frame pointers; it also makes an extra register available in many functions. It also makes debugging impossible on some machines.

On some machines, such as the VAX, this flag has no effect, because the standard calling sequence automatically handles the frame pointer and nothing is saved by pretending it doesn't exist. The machine-description macro FRAME_POINTER_REQUIRED controls whether a target machine supports this flag. See Register Usage.

Enabled at levels -O, -O2, -O3, -Os.

-foptimize-sibling-calls
Optimize sibling and tail recursive calls.

Enabled at levels -O2, -O3, -Os.

-fno-inline
Don't pay attention to the inline keyword. Normally this option is used to keep the compiler from expanding any functions inline. Note that if you are not optimizing, no functions can be expanded inline.
-finline-small-functions
Integrate functions into their callers when their body is smaller than expected function call code (so overall size of program gets smaller). The compiler heuristically decides which functions are simple enough to be worth integrating in this way.

Enabled at level -O2.

-finline-functions
Integrate all simple functions into their callers. The compiler heuristically decides which functions are simple enough to be worth integrating in this way.

If all calls to a given function are integrated, and the function is declared static, then the function is normally not output as assembler code in its own right.

Enabled at level -O3.

-finline-functions-called-once
Consider all static functions called once for inlining into their caller even if they are not marked inline. If a call to a given function is integrated, then the function is not output as assembler code in its own right.

Enabled if -funit-at-a-time is enabled.

-fearly-inlining
Inline functions marked by always_inline and functions whose body seems smaller than the function call overhead early before doing -fprofile-generate instrumentation and real inlining pass. Doing so makes profiling significantly cheaper and usually inlining faster on programs having large chains of nested wrapper functions.

Enabled by default.

-finline-limit=n
By default, GCC limits the size of functions that can be inlined. This flag allows coarse control of this limit. n is the size of functions that can be inlined in number of pseudo instructions.

Inlining is actually controlled by a number of parameters, which may be specified individually by using --param name=value. The -finline-limit=n option sets some of these parameters as follows:

max-inline-insns-single
is set to n/2.
max-inline-insns-auto
is set to n/2.

See below for a documentation of the individual parameters controlling inlining and for the defaults of these parameters.

Note: there may be no value to -finline-limit that results in default behavior.

Note: pseudo instruction represents, in this particular context, an abstract measurement of function's size. In no way does it represent a count of assembly instructions and as such its exact meaning might change from one release to an another.

-fkeep-inline-functions
In C, emit static functions that are declared inline into the object file, even if the function has been inlined into all of its callers. This switch does not affect functions using the extern inline extension in GNU C89. In C++, emit any and all inline functions into the object file.
-fkeep-static-consts
Emit variables declared static const when optimization isn't turned on, even if the variables aren't referenced.

GCC enables this option by default. If you want to force the compiler to check if the variable was referenced, regardless of whether or not optimization is turned on, use the -fno-keep-static-consts option.

-fmerge-constants
Attempt to merge identical constants (string constants and floating point constants) across compilation units.

This option is the default for optimized compilation if the assembler and linker support it. Use -fno-merge-constants to inhibit this behavior.

Enabled at levels -O, -O2, -O3, -Os.

-fmerge-all-constants
Attempt to merge identical constants and identical variables.

This option implies -fmerge-constants. In addition to -fmerge-constants this considers e.g. even constant initialized arrays or initialized constant variables with integral or floating point types. Languages like C or C++ require each non-automatic variable to have distinct location, so using this option will result in non-conforming behavior.

-fmodulo-sched
Perform swing modulo scheduling immediately before the first scheduling pass. This pass looks at innermost loops and reorders their instructions by overlapping different iterations.
-fmodulo-sched-allow-regmoves
Perform more aggressive SMS based modulo scheduling with register moves allowed. By setting this flag certain anti-dependences edges will be deleted which will trigger the generation of reg-moves based on the life-range analysis. This option is effective only with -fmodulo-sched enabled.
-fno-branch-count-reg
Do not use “decrement and branch” instructions on a count register, but instead generate a sequence of instructions that decrement a register, compare it against zero, then branch based upon the result. This option is only meaningful on architectures that support such instructions, which include x86, PowerPC, IA-64 and S/390.

The default is -fbranch-count-reg.

-fno-function-cse
Do not put function addresses in registers; make each instruction that calls a constant function contain the function's address explicitly.

This option results in less efficient code, but some strange hacks that alter the assembler output may be confused by the optimizations performed when this option is not used.

The default is -ffunction-cse

-fno-zero-initialized-in-bss
If the target supports a BSS section, GCC by default puts variables that are initialized to zero into BSS. This can save space in the resulting code.

This option turns off this behavior because some programs explicitly rely on variables going to the data section. E.g., so that the resulting executable can find the beginning of that section and/or make assumptions based on that.

The default is -fzero-initialized-in-bss.

-fmudflap -fmudflapth -fmudflapir
For front-ends that support it (C and C++), instrument all risky pointer/array dereferencing operations, some standard library string/heap functions, and some other associated constructs with range/validity tests. Modules so instrumented should be immune to buffer overflows, invalid heap use, and some other classes of C/C++ programming errors. The instrumentation relies on a separate runtime library (libmudflap), which will be linked into a program if -fmudflap is given at link time. Run-time behavior of the instrumented program is controlled by the MUDFLAP_OPTIONS environment variable. See env MUDFLAP_OPTIONS=-help a.out for its options.

Use -fmudflapth instead of -fmudflap to compile and to link if your program is multi-threaded. Use -fmudflapir, in addition to -fmudflap or -fmudflapth, if instrumentation should ignore pointer reads. This produces less instrumentation (and therefore faster execution) and still provides some protection against outright memory corrupting writes, but allows erroneously read data to propagate within a program.

-fthread-jumps
Perform optimizations where we check to see if a jump branches to a location where another comparison subsumed by the first is found. If so, the first branch is redirected to either the destination of the second branch or a point immediately following it, depending on whether the condition is known to be true or false.

Enabled at levels -O2, -O3, -Os.

-fsplit-wide-types
When using a type that occupies multiple registers, such as long long on a 32-bit system, split the registers apart and allocate them independently. This normally generates better code for those types, but may make debugging more difficult.

Enabled at levels -O, -O2, -O3, -Os.

-fcse-follow-jumps
In common subexpression elimination (CSE), scan through jump instructions when the target of the jump is not reached by any other path. For example, when CSE encounters an if statement with an else clause, CSE will follow the jump when the condition tested is false.

Enabled at levels -O2, -O3, -Os.

-fcse-skip-blocks
This is similar to -fcse-follow-jumps, but causes CSE to follow jumps which conditionally skip over blocks. When CSE encounters a simple if statement with no else clause, -fcse-skip-blocks causes CSE to follow the jump around the body of the if.

Enabled at levels -O2, -O3, -Os.

-frerun-cse-after-loop
Re-run common subexpression elimination after loop optimizations has been performed.

Enabled at levels -O2, -O3, -Os.

-fgcse
Perform a global common subexpression elimination pass. This pass also performs global constant and copy propagation.

Note: When compiling a program using computed gotos, a GCC extension, you may get better runtime performance if you disable the global common subexpression elimination pass by adding -fno-gcse to the command line.

Enabled at levels -O2, -O3, -Os.

-fgcse-lm
When -fgcse-lm is enabled, global common subexpression elimination will attempt to move loads which are only killed by stores into themselves. This allows a loop containing a load/store sequence to be changed to a load outside the loop, and a copy/store within the loop.

Enabled by default when gcse is enabled.

-fgcse-sm
When -fgcse-sm is enabled, a store motion pass is run after global common subexpression elimination. This pass will attempt to move stores out of loops. When used in conjunction with -fgcse-lm, loops containing a load/store sequence can be changed to a load before the loop and a store after the loop.

Not enabled at any optimization level.

-fgcse-las
When -fgcse-las is enabled, the global common subexpression elimination pass eliminates redundant loads that come after stores to the same memory location (both partial and full redundancies).

Not enabled at any optimization level.

-fgcse-after-reload
When -fgcse-after-reload is enabled, a redundant load elimination pass is performed after reload. The purpose of this pass is to cleanup redundant spilling.
-funsafe-loop-optimizations
If given, the loop optimizer will assume that loop indices do not overflow, and that the loops with nontrivial exit condition are not infinite. This enables a wider range of loop optimizations even if the loop optimizer itself cannot prove that these assumptions are valid. Using -Wunsafe-loop-optimizations, the compiler will warn you if it finds this kind of loop.
-fcrossjumping
Perform cross-jumping transformation. This transformation unifies equivalent code and save code size. The resulting code may or may not perform better than without cross-jumping.

Enabled at levels -O2, -O3, -Os.

-fauto-inc-dec
Combine increments or decrements of addresses with memory accesses. This pass is always skipped on architectures that do not have instructions to support this. Enabled by default at -O and higher on architectures that support this.
-fdce
Perform dead code elimination (DCE) on RTL. Enabled by default at -O and higher.
-fdse
Perform dead store elimination (DSE) on RTL. Enabled by default at -O and higher.
-fif-conversion
Attempt to transform conditional jumps into branch-less equivalents. This include use of conditional moves, min, max, set flags and abs instructions, and some tricks doable by standard arithmetics. The use of conditional execution on chips where it is available is controlled by if-conversion2.

Enabled at levels -O, -O2, -O3, -Os.

-fif-conversion2
Use conditional execution (where available) to transform conditional jumps into branch-less equivalents.

Enabled at levels -O, -O2, -O3, -Os.

-fdelete-null-pointer-checks
Use global dataflow analysis to identify and eliminate useless checks for null pointers. The compiler assumes that dereferencing a null pointer would have halted the program. If a pointer is checked after it has already been dereferenced, it cannot be null.

In some environments, this assumption is not true, and programs can safely dereference null pointers. Use -fno-delete-null-pointer-checks to disable this optimization for programs which depend on that behavior.

Enabled at levels -O2, -O3, -Os.

-fexpensive-optimizations
Perform a number of minor optimizations that are relatively expensive.

Enabled at levels -O2, -O3, -Os.

-foptimize-register-move
-fregmove
Attempt to reassign register numbers in move instructions and as operands of other simple instructions in order to maximize the amount of register tying. This is especially helpful on machines with two-operand instructions.

Note -fregmove and -foptimize-register-move are the same optimization.

Enabled at levels -O2, -O3, -Os.

-fdelayed-branch
If supported for the target machine, attempt to reorder instructions to exploit instruction slots available after delayed branch instructions.

Enabled at levels -O, -O2, -O3, -Os.

-fschedule-insns
If supported for the target machine, attempt to reorder instructions to eliminate execution stalls due to required data being unavailable. This helps machines that have slow floating point or memory load instructions by allowing other instructions to be issued until the result of the load or floating point instruction is required.

Enabled at levels -O2, -O3, -Os.

-fschedule-insns2
Similar to -fschedule-insns, but requests an additional pass of instruction scheduling after register allocation has been done. This is especially useful on machines with a relatively small number of registers and where memory load instructions take more than one cycle.

Enabled at levels -O2, -O3, -Os.

-fno-sched-interblock
Don't schedule instructions across basic blocks. This is normally enabled by default when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher.
-fno-sched-spec
Don't allow speculative motion of non-load instructions. This is normally enabled by default when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher.
-fsched-spec-load
Allow speculative motion of some load instructions. This only makes sense when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher.
-fsched-spec-load-dangerous
Allow speculative motion of more load instructions. This only makes sense when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher.
-fsched-stalled-insns
-fsched-stalled-insns=n
Define how many insns (if any) can be moved prematurely from the queue of stalled insns into the ready list, during the second scheduling pass. -fno-sched-stalled-insns means that no insns will be moved prematurely, -fsched-stalled-insns=0 means there is no limit on how many queued insns can be moved prematurely. -fsched-stalled-insns without a value is equivalent to -fsched-stalled-insns=1.
-fsched-stalled-insns-dep
-fsched-stalled-insns-dep=n
Define how many insn groups (cycles) will be examined for a dependency on a stalled insn that is candidate for premature removal from the queue of stalled insns. This has an effect only during the second scheduling pass, and only if -fsched-stalled-insns is used. -fno-sched-stalled-insns-dep is equivalent to -fsched-stalled-insns-dep=0. -fsched-stalled-insns-dep without a value is equivalent to -fsched-stalled-insns-dep=1.
-fsched2-use-superblocks
When scheduling after register allocation, do use superblock scheduling algorithm. Superblock scheduling allows motion across basic block boundaries resulting on faster schedules. This option is experimental, as not all machine descriptions used by GCC model the CPU closely enough to avoid unreliable results from the algorithm.

This only makes sense when scheduling after register allocation, i.e. with -fschedule-insns2 or at -O2 or higher.

-fsched2-use-traces
Use -fsched2-use-superblocks algorithm when scheduling after register allocation and additionally perform code duplication in order to increase the size of superblocks using tracer pass. See -ftracer for details on trace formation.

This mode should produce faster but significantly longer programs. Also without -fbranch-probabilities the traces constructed may not match the reality and hurt the performance. This only makes sense when scheduling after register allocation, i.e. with -fschedule-insns2 or at -O2 or higher.

-fsee
Eliminate redundant sign extension instructions and move the non-redundant ones to optimal placement using lazy code motion (LCM).
-freschedule-modulo-scheduled-loops
The modulo scheduling comes before the traditional scheduling, if a loop was modulo scheduled we may want to prevent the later scheduling passes from changing its schedule, we use this option to control that.
-fcaller-saves
Enable values to be allocated in registers that will be clobbered by function calls, by emitting extra instructions to save and restore the registers around such calls. Such allocation is done only when it seems to result in better code than would otherwise be produced.

This option is always enabled by default on certain machines, usually those which have no call-preserved registers to use instead.

Enabled at levels -O2, -O3, -Os.

-ftree-reassoc
Perform reassociation on trees. This flag is enabled by default at -O and higher.
-ftree-pre
Perform partial redundancy elimination (PRE) on trees. This flag is enabled by default at -O2 and -O3.
-ftree-fre
Perform full redundancy elimination (FRE) on trees. The difference between FRE and PRE is that FRE only considers expressions that are computed on all paths leading to the redundant computation. This analysis is faster than PRE, though it exposes fewer redundancies. This flag is enabled by default at -O and higher.
-ftree-copy-prop
Perform copy propagation on trees. This pass eliminates unnecessary copy operations. This flag is enabled by default at -O and higher.
-ftree-salias
Perform structural alias analysis on trees. This flag is enabled by default at -O and higher.
-fipa-pure-const
Discover which functions are pure or constant. Enabled by default at -O and higher.
-fipa-reference
Discover which static variables do not escape cannot escape the compilation unit. Enabled by default at -O and higher.
-fipa-struct-reorg
Perform structure reorganization optimization, that change C-like structures layout in order to better utilize spatial locality. This transformation is affective for programs containing arrays of structures. Available in two compilation modes: profile-based (enabled with -fprofile-generate) or static (which uses built-in heuristics). Require -fipa-type-escape to provide the safety of this transformation. It works only in whole program mode, so it requires -fwhole-program and -combine to be enabled. Structures considered `cold' by this transformation are not affected (see --param struct-reorg-cold-struct-ratio=value).

With this flag, the program debug info reflects a new structure layout.

-fipa-pta
Perform interprocedural pointer analysis.
-fipa-cp
Perform interprocedural constant propagation. This optimization analyzes the program to determine when values passed to functions are constants and then optimizes accordingly. This optimization can substantially increase performance if the application has constants passed to functions, but because this optimization can create multiple copies of functions, it may significantly increase code size.
-fipa-matrix-reorg
Perform matrix flattening and transposing. Matrix flattening tries to replace a m-dimensional matrix with its equivalent n-dimensional matrix, where n < m. This reduces the level of indirection needed for accessing the elements of the matrix. The second optimization is matrix transposing that attemps to change the order of the matrix's dimensions in order to improve cache locality. Both optimizations need fwhole-program flag. Transposing is enabled only if profiling information is avaliable.
-ftree-sink
Perform forward store motion on trees. This flag is enabled by default at -O and higher.
-ftree-ccp
Perform sparse conditional constant propagation (CCP) on trees. This pass only operates on local scalar variables and is enabled by default at -O and higher.
-ftree-store-ccp
Perform sparse conditional constant propagation (CCP) on trees. This pass operates on both local scalar variables and memory stores and loads (global variables, structures, arrays, etc). This flag is enabled by default at -O2 and higher.
-ftree-dce
Perform dead code elimination (DCE) on trees. This flag is enabled by default at -O and higher.
-ftree-dominator-opts
Perform a variety of simple scalar cleanups (constant/copy propagation, redundancy elimination, range propagation and expression simplification) based on a dominator tree traversal. This also performs jump threading (to reduce jumps to jumps). This flag is enabled by default at -O and higher.
-ftree-dse
Perform dead store elimination (DSE) on trees. A dead store is a store into a memory location which will later be overwritten by another store without any intervening loads. In this case the earlier store can be deleted. This flag is enabled by default at -O and higher.
-ftree-ch
Perform loop header copying on trees. This is beneficial since it increases effectiveness of code motion optimizations. It also saves one jump. This flag is enabled by default at -O and higher. It is not enabled for -Os, since it usually increases code size.
-ftree-loop-optimize
Perform loop optimizations on trees. This flag is enabled by default at -O and higher.
-ftree-loop-linear
Perform linear loop transformations on tree. This flag can improve cache performance and allow further loop optimizations to take place.
-fcheck-data-deps
Compare the results of several data dependence analyzers. This option is used for debugging the data dependence analyzers.
-ftree-loop-im
Perform loop invariant motion on trees. This pass moves only invariants that would be hard to handle at RTL level (function calls, operations that expand to nontrivial sequences of insns). With -funswitch-loops it also moves operands of conditions that are invariant out of the loop, so that we can use just trivial invariantness analysis in loop unswitching. The pass also includes store motion.
-ftree-loop-ivcanon
Create a canonical counter for number of iterations in the loop for that determining number of iterations requires complicated analysis. Later optimizations then may determine the number easily. Useful especially in connection with unrolling.
-fivopts
Perform induction variable optimizations (strength reduction, induction variable merging and induction variable elimination) on trees.
-ftree-parallelize-loops=n
Parallelize loops, i.e., split their iteration space to run in n threads. This is only possible for loops whose iterations are independent and can be arbitrarily reordered. The optimization is only profitable on multiprocessor machines, for loops that are CPU-intensive, rather than constrained e.g. by memory bandwidth. This option implies -pthread, and thus is only supported on targets that have support for -pthread.
-ftree-sra
Perform scalar replacement of aggregates. This pass replaces structure references with scalars to prevent committing structures to memory too early. This flag is enabled by default at -O and higher.
-ftree-copyrename
Perform copy renaming on trees. This pass attempts to rename compiler temporaries to other variables at copy locations, usually resulting in variable names which more closely resemble the original variables. This flag is enabled by default at -O and higher.
-ftree-ter
Perform temporary expression replacement during the SSA->normal phase. Single use/single def temporaries are replaced at their use location with their defining expression. This results in non-GIMPLE code, but gives the expanders much more complex trees to work on resulting in better RTL generation. This is enabled by default at -O and higher.
-ftree-vectorize
Perform loop vectorization on trees.
-ftree-vect-loop-version
Perform loop versioning when doing loop vectorization on trees. When a loop appears to be vectorizable except that data alignment or data dependence cannot be determined at compile time then vectorized and non-vectorized versions of the loop are generated along with runtime checks for alignment or dependence to control which version is executed. This option is enabled by default except at level -Os where it is disabled.
-fvect-cost-model
Enable cost model for vectorization.
-ftree-vrp
Perform Value Range Propagation on trees. This is similar to the constant propagation pass, but instead of values, ranges of values are propagated. This allows the optimizers to remove unnecessary range checks like array bound checks and null pointer checks. This is enabled by default at -O2 and higher. Null pointer check elimination is only done if -fdelete-null-pointer-checks is enabled.
-ftracer
Perform tail duplication to enlarge superblock size. This transformation simplifies the control flow of the function allowing other optimizations to do better job.
-funroll-loops
Unroll loops whose number of iterations can be determined at compile time or upon entry to the loop. -funroll-loops implies -frerun-cse-after-loop. This option makes code larger, and may or may not make it run faster.
-funroll-all-loops
Unroll all loops, even if their number of iterations is uncertain when the loop is entered. This usually makes programs run more slowly. -funroll-all-loops implies the same options as -funroll-loops,
-fsplit-ivs-in-unroller
Enables expressing of values of induction variables in later iterations of the unrolled loop using the value in the first iteration. This breaks long dependency chains, thus improving efficiency of the scheduling passes.

Combination of -fweb and CSE is often sufficient to obtain the same effect. However in cases the loop body is more complicated than a single basic block, this is not reliable. It also does not work at all on some of the architectures due to restrictions in the CSE pass.

This optimization is enabled by default.

-fvariable-expansion-in-unroller
With this option, the compiler will create multiple copies of some local variables when unrolling a loop which can result in superior code.
-fpredictive-commoning
Perform predictive commoning optimization, i.e., reusing computations (especially memory loads and stores) performed in previous iterations of loops.

This option is enabled at level -O3.

-fprefetch-loop-arrays
If supported by the target machine, generate instructions to prefetch memory to improve the performance of loops that access large arrays.

This option may generate better or worse code; results are highly dependent on the structure of loops within the source code.

Disabled at level -Os.

-fno-peephole
-fno-peephole2
Disable any machine-specific peephole optimizations. The difference between -fno-peephole and -fno-peephole2 is in how they are implemented in the compiler; some targets use one, some use the other, a few use both.

-fpeephole is enabled by default. -fpeephole2 enabled at levels -O2, -O3, -Os.

-fno-guess-branch-probability
Do not guess branch probabilities using heuristics.

GCC will use heuristics to guess branch probabilities if they are not provided by profiling feedback (-fprofile-arcs). These heuristics are based on the control flow graph. If some branch probabilities are specified by `__builtin_expect', then the heuristics will be used to guess branch probabilities for the rest of the control flow graph, taking the `__builtin_expect' info into account. The interactions between the heuristics and `__builtin_expect' can be complex, and in some cases, it may be useful to disable the heuristics so that the effects of `__builtin_expect' are easier to understand.

The default is -fguess-branch-probability at levels -O, -O2, -O3, -Os.

-freorder-blocks
Reorder basic blocks in the compiled function in order to reduce number of taken branches and improve code locality.

Enabled at levels -O2, -O3.

-freorder-blocks-and-partition
In addition to reordering basic blocks in the compiled function, in order to reduce number of taken branches, partitions hot and cold basic blocks into separate sections of the assembly and .o files, to improve paging and cache locality performance.

This optimization is automatically turned off in the presence of exception handling, for linkonce sections, for functions with a user-defined section attribute and on any architecture that does not support named sections.

-freorder-functions
Reorder functions in the object file in order to improve code locality. This is implemented by using special subsections .text.hot for most frequently executed functions and .text.unlikely for unlikely executed functions. Reordering is done by the linker so object file format must support named sections and linker must place them in a reasonable way.

Also profile feedback must be available in to make this option effective. See -fprofile-arcs for details.

Enabled at levels -O2, -O3, -Os.

-fstrict-aliasing
Allows the compiler to assume the strictest aliasing rules applicable to the language being compiled. For C (and C++), this activates optimizations based on the type of expressions. In particular, an object of one type is assumed never to reside at the same address as an object of a different type, unless the types are almost the same. For example, an unsigned int can alias an int, but not a void* or a double. A character type may alias any other type.

Pay special attention to code like this:

          union a_union {
            int i;
            double d;
          };
          
          int f() {
            a_union t;
            t.d = 3.0;
            return t.i;
          }
     

The practice of reading from a different union member than the one most recently written to (called “type-punning”) is common. Even with -fstrict-aliasing, type-punning is allowed, provided the memory is accessed through the union type. So, the code above will work as expected. However, this code might not:

          int f() {
            a_union t;
            int* ip;
            t.d = 3.0;
            ip = &t.i;
            return *ip;
          }
     

Enabled at levels -O2, -O3, -Os.

-fstrict-overflow
Allow the compiler to assume strict signed overflow rules, depending on the language being compiled. For C (and C++) this means that overflow when doing arithmetic with signed numbers is undefined, which means that the compiler may assume that it will not happen. This permits various optimizations. For example, the compiler will assume that an expression like i + 10 > i will always be true for signed i. This assumption is only valid if signed overflow is undefined, as the expression is false if i + 10 overflows when using twos complement arithmetic. When this option is in effect any attempt to determine whether an operation on signed numbers will overflow must be written carefully to not actually involve overflow.

See also the -fwrapv option. Using -fwrapv means that signed overflow is fully defined: it wraps. When -fwrapv is used, there is no difference between -fstrict-overflow and -fno-strict-overflow. With -fwrapv certain types of overflow are permitted. For example, if the compiler gets an overflow when doing arithmetic on constants, the overflowed value can still be used with -fwrapv, but not otherwise.

The -fstrict-overflow option is enabled at levels -O2, -O3, -Os.

-falign-functions
-falign-functions=n
Align the start of functions to the next power-of-two greater than n, skipping up to n bytes. For instance, -falign-functions=32 aligns functions to the next 32-byte boundary, but -falign-functions=24 would align to the next 32-byte boundary only if this can be done by skipping 23 bytes or less.

-fno-align-functions and -falign-functions=1 are equivalent and mean that functions will not be aligned.

Some assemblers only support this flag when n is a power of two; in that case, it is rounded up.

If n is not specified or is zero, use a machine-dependent default.

Enabled at levels -O2, -O3.

-falign-labels
-falign-labels=n
Align all branch targets to a power-of-two boundary, skipping up to n bytes like -falign-functions. This option can easily make code slower, because it must insert dummy operations for when the branch target is reached in the usual flow of the code.

-fno-align-labels and -falign-labels=1 are equivalent and mean that labels will not be aligned.

If -falign-loops or -falign-jumps are applicable and are greater than this value, then their values are used instead.

If n is not specified or is zero, use a machine-dependent default which is very likely to be `1', meaning no alignment.

Enabled at levels -O2, -O3.

-falign-loops
-falign-loops=n
Align loops to a power-of-two boundary, skipping up to n bytes like -falign-functions. The hope is that the loop will be executed many times, which will make up for any execution of the dummy operations.

-fno-align-loops and -falign-loops=1 are equivalent and mean that loops will not be aligned.

If n is not specified or is zero, use a machine-dependent default.

Enabled at levels -O2, -O3.

-falign-jumps
-falign-jumps=n
Align branch targets to a power-of-two boundary, for branch targets where the targets can only be reached by jumping, skipping up to n bytes like -falign-functions. In this case, no dummy operations need be executed.

-fno-align-jumps and -falign-jumps=1 are equivalent and mean that loops will not be aligned.

If n is not specified or is zero, use a machine-dependent default.

Enabled at levels -O2, -O3.

-funit-at-a-time
Parse the whole compilation unit before starting to produce code. This allows some extra optimizations to take place but consumes more memory (in general). There are some compatibility issues with unit-at-a-time mode:

As a temporary workaround, -fno-unit-at-a-time can be used, but this scheme may not be supported by future releases of GCC.

Enabled at levels -O, -O2, -O3, -Os.

-fno-toplevel-reorder
Do not reorder top-level functions, variables, and asm statements. Output them in the same order that they appear in the input file. When this option is used, unreferenced static variables will not be removed. This option is intended to support existing code which relies on a particular ordering. For new code, it is better to use attributes.
-fweb
Constructs webs as commonly used for register allocation purposes and assign each web individual pseudo register. This allows the register allocation pass to operate on pseudos directly, but also strengthens several other optimization passes, such as CSE, loop optimizer and trivial dead code remover. It can, however, make debugging impossible, since variables will no longer stay in a “home register”.

Enabled by default with -funroll-loops.

-fwhole-program
Assume that the current compilation unit represents whole program being compiled. All public functions and variables with the exception of main and those merged by attribute externally_visible become static functions and in a affect gets more aggressively optimized by interprocedural optimizers. While this option is equivalent to proper use of static keyword for programs consisting of single file, in combination with option --combine this flag can be used to compile most of smaller scale C programs since the functions and variables become local for the whole combined compilation unit, not for the single source file itself.

This option is not supported for Fortran programs.

-fcprop-registers
After register allocation and post-register allocation instruction splitting, we perform a copy-propagation pass to try to reduce scheduling dependencies and occasionally eliminate the copy.

Enabled at levels -O, -O2, -O3, -Os.

-fprofile-generate
Enable options usually used for instrumenting application to produce profile useful for later recompilation with profile feedback based optimization. You must use -fprofile-generate both when compiling and when linking your program.

The following options are enabled: -fprofile-arcs, -fprofile-values, -fvpt.

-fprofile-use
Enable profile feedback directed optimizations, and optimizations generally profitable only with profile feedback available.

The following options are enabled: -fbranch-probabilities, -fvpt, -funroll-loops, -fpeel-loops, -ftracer

By default, GCC emits an error message if the feedback profiles do not match the source code. This error can be turned into a warning by using -Wcoverage-mismatch. Note this may result in poorly optimized code.

The following options control compiler behavior regarding floating point arithmetic. These options trade off between speed and correctness. All must be specifically enabled.

-ffloat-store
Do not store floating point variables in registers, and inhibit other options that might change whether a floating point value is taken from a register or memory.

This option prevents undesirable excess precision on machines such as the 68000 where the floating registers (of the 68881) keep more precision than a double is supposed to have. Similarly for the x86 architecture. For most programs, the excess precision does only good, but a few programs rely on the precise definition of IEEE floating point. Use -ffloat-store for such programs, after modifying them to store all pertinent intermediate computations into variables.

-ffast-math
Sets -fno-math-errno, -funsafe-math-optimizations, -ffinite-math-only, -fno-rounding-math, -fno-signaling-nans and -fcx-limited-range.

This option causes the preprocessor macro __FAST_MATH__ to be defined.

This option is not turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications for math functions. It may, however, yield faster code for programs that do not require the guarantees of these specifications.

-fno-math-errno
Do not set ERRNO after calling math functions that are executed with a single instruction, e.g., sqrt. A program that relies on IEEE exceptions for math error handling may want to use this flag for speed while maintaining IEEE arithmetic compatibility.

This option is not turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications for math functions. It may, however, yield faster code for programs that do not require the guarantees of these specifications.

The default is -fmath-errno.

On Darwin systems, the math library never sets errno. There is therefore no reason for the compiler to consider the possibility that it might, and -fno-math-errno is the default.

-funsafe-math-optimizations
Allow optimizations for floating-point arithmetic that (a) assume that arguments and results are valid and (b) may violate IEEE or ANSI standards. When used at link-time, it may include libraries or startup files that change the default FPU control word or other similar optimizations.

This option is not turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications for math functions. It may, however, yield faster code for programs that do not require the guarantees of these specifications. Enables -fno-signed-zeros, -fno-trapping-math, -fassociative-math and -freciprocal-math.

The default is -fno-unsafe-math-optimizations.

-fassociative-math
Allow re-association of operands in series of floating-point operations. This violates the ISO C and C++ language standard by possibly changing computation result. NOTE: re-ordering may change the sign of zero as well as ignore NaNs and inhibit or create underflow or overflow (and thus cannot be used on a code which relies on rounding behavior like (x + 2**52) - 2**52). May also reorder floating-point comparisons and thus may not be used when ordered comparisons are required. This option requires that both -fno-signed-zeros and -fno-trapping-math be in effect. Moreover, it doesn't make much sense with -frounding-math.

The default is -fno-associative-math.

-freciprocal-math
Allow the reciprocal of a value to be used instead of dividing by the value if this enables optimizations. For example x / y can be replaced with x * (1/y) which is useful if (1/y) is subject to common subexpression elimination. Note that this loses precision and increases the number of flops operating on the value.

The default is -fno-reciprocal-math.

-ffinite-math-only
Allow optimizations for floating-point arithmetic that assume that arguments and results are not NaNs or +-Infs.

This option is not turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications for math functions. It may, however, yield faster code for programs that do not require the guarantees of these specifications.

The default is -fno-finite-math-only.

-fno-signed-zeros
Allow optimizations for floating point arithmetic that ignore the signedness of zero. IEEE arithmetic specifies the behavior of distinct +0.0 and −0.0 values, which then prohibits simplification of expressions such as x+0.0 or 0.0*x (even with -ffinite-math-only). This option implies that the sign of a zero result isn't significant.

The default is -fsigned-zeros.

-fno-trapping-math
Compile code assuming that floating-point operations cannot generate user-visible traps. These traps include division by zero, overflow, underflow, inexact result and invalid operation. This option requires that -fno-signaling-nans be in effect. Setting this option may allow faster code if one relies on “non-stop” IEEE arithmetic, for example.

This option should never be turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications for math functions.

The default is -ftrapping-math.

-frounding-math
Disable transformations and optimizations that assume default floating point rounding behavior. This is round-to-zero for all floating point to integer conversions, and round-to-nearest for all other arithmetic truncations. This option should be specified for programs that change the FP rounding mode dynamically, or that may be executed with a non-default rounding mode. This option disables constant folding of floating point expressions at compile-time (which may be affected by rounding mode) and arithmetic transformations that are unsafe in the presence of sign-dependent rounding modes.

The default is -fno-rounding-math.

This option is experimental and does not currently guarantee to disable all GCC optimizations that are affected by rounding mode. Future versions of GCC may provide finer control of this setting using C99's FENV_ACCESS pragma. This command line option will be used to specify the default state for FENV_ACCESS.

-frtl-abstract-sequences
It is a size optimization method. This option is to find identical sequences of code, which can be turned into pseudo-procedures and then replace all occurrences with calls to the newly created subroutine. It is kind of an opposite of -finline-functions. This optimization runs at RTL level.
-fsignaling-nans
Compile code assuming that IEEE signaling NaNs may generate user-visible traps during floating-point operations. Setting this option disables optimizations that may change the number of exceptions visible with signaling NaNs. This option implies -ftrapping-math.

This option causes the preprocessor macro __SUPPORT_SNAN__ to be defined.

The default is -fno-signaling-nans.

This option is experimental and does not currently guarantee to disable all GCC optimizations that affect signaling NaN behavior.

-fsingle-precision-constant
Treat floating point constant as single precision constant instead of implicitly converting it to double precision constant.
-fcx-limited-range
When enabled, this option states that a range reduction step is not needed when performing complex division. The default is -fno-cx-limited-range, but is enabled by -ffast-math.

This option controls the default setting of the ISO C99 CX_LIMITED_RANGE pragma. Nevertheless, the option applies to all languages.

The following options control optimizations that may improve performance, but are not enabled by any -O options. This section includes experimental options that may produce broken code.

-fbranch-probabilities
After running a program compiled with -fprofile-arcs (see Options for Debugging Your Program or gcc), you can compile it a second time using -fbranch-probabilities, to improve optimizations based on the number of times each branch was taken. When the program compiled with -fprofile-arcs exits it saves arc execution counts to a file called sourcename.gcda for each source file. The information in this data file is very dependent on the structure of the generated code, so you must use the same source code and the same optimization options for both compilations.

With -fbranch-probabilities, GCC puts a `REG_BR_PROB' note on each `JUMP_INSN' and `CALL_INSN'. These can be used to improve optimization. Currently, they are only used in one place: in reorg.c, instead of guessing which path a branch is mostly to take, the `REG_BR_PROB' values are used to exactly determine which path is taken more often.

-fprofile-values
If combined with -fprofile-arcs, it adds code so that some data about values of expressions in the program is gathered.

With -fbranch-probabilities, it reads back the data gathered from profiling values of expressions and adds `REG_VALUE_PROFILE' notes to instructions for their later usage in optimizations.

Enabled with -fprofile-generate and -fprofile-use.

-fvpt
If combined with -fprofile-arcs, it instructs the compiler to add a code to gather information about values of expressions.

With -fbranch-probabilities, it reads back the data gathered and actually performs the optimizations based on them. Currently the optimizations include specialization of division operation using the knowledge about the value of the denominator.

-frename-registers
Attempt to avoid false dependencies in scheduled code by making use of registers left over after register allocation. This optimization will most benefit processors with lots of registers. Depending on the debug information format adopted by the target, however, it can make debugging impossible, since variables will no longer stay in a “home register”.

Enabled by default with -funroll-loops.

-ftracer
Perform tail duplication to enlarge superblock size. This transformation simplifies the control flow of the function allowing other optimizations to do better job.

Enabled with -fprofile-use.

-funroll-loops
Unroll loops whose number of iterations can be determined at compile time or upon entry to the loop. -funroll-loops implies -frerun-cse-after-loop, -fweb and -frename-registers. It also turns on complete loop peeling (i.e. complete removal of loops with small constant number of iterations). This option makes code larger, and may or may not make it run faster.

Enabled with -fprofile-use.

-funroll-all-loops
Unroll all loops, even if their number of iterations is uncertain when the loop is entered. This usually makes programs run more slowly. -funroll-all-loops implies the same options as -funroll-loops.
-fpeel-loops
Peels the loops for that there is enough information that they do not roll much (from profile feedback). It also turns on complete loop peeling (i.e. complete removal of loops with small constant number of iterations).

Enabled with -fprofile-use.

-fmove-loop-invariants
Enables the loop invariant motion pass in the RTL loop optimizer. Enabled at level -O1
-funswitch-loops
Move branches with loop invariant conditions out of the loop, with duplicates of the loop on both branches (modified according to result of the condition).
-ffunction-sections
-fdata-sections
Place each function or data item into its own section in the output file if the target supports arbitrary sections. The name of the function or the name of the data item determines the section's name in the output file.

Use these options on systems where the linker can perform optimizations to improve locality of reference in the instruction space. Most systems using the ELF object format and SPARC processors running Solaris 2 have linkers with such optimizations. AIX may have these optimizations in the future.

Only use these options when there are significant benefits from doing so. When you specify these options, the assembler and linker will create larger object and executable files and will also be slower. You will not be able to use gprof on all systems if you specify this option and you may have problems with debugging if you specify both this option and -g.

-fbranch-target-load-optimize
Perform branch target register load optimization before prologue / epilogue threading. The use of target registers can typically be exposed only during reload, thus hoisting loads out of loops and doing inter-block scheduling needs a separate optimization pass.
-fbranch-target-load-optimize2
Perform branch target register load optimization after prologue / epilogue threading.
-fbtr-bb-exclusive
When performing branch target register load optimization, don't reuse branch target registers in within any basic block.
-fstack-protector
Emit extra code to check for buffer overflows, such as stack smashing attacks. This is done by adding a guard variable to functions with vulnerable objects. This includes functions that call alloca, and functions with buffers larger than 8 bytes. The guards are initialized when a function is entered and then checked when the function exits. If a guard check fails, an error message is printed and the program exits.
-fstack-protector-all
Like -fstack-protector except that all functions are protected.
-fsection-anchors
Try to reduce the number of symbolic address calculations by using shared “anchor” symbols to address nearby objects. This transformation can help to reduce the number of GOT entries and GOT accesses on some targets.

For example, the implementation of the following function foo:

          static int a, b, c;
          int foo (void) { return a + b + c; }
     

would usually calculate the addresses of all three variables, but if you compile it with -fsection-anchors, it will access the variables from a common anchor point instead. The effect is similar to the following pseudocode (which isn't valid C):

          int foo (void)
          {
            register int *xr = &x;
            return xr[&a - &x] + xr[&b - &x] + xr[&c - &x];
          }
     

Not all targets support this option.

--param name=value
In some places, GCC uses various constants to control the amount of optimization that is done. For example, GCC will not inline functions that contain more that a certain number of instructions. You can control some of these constants on the command-line using the --param option.

The names of specific parameters, and the meaning of the values, are tied to the internals of the compiler, and are subject to change without notice in future releases.

In each case, the value is an integer. The allowable choices for name are given in the following table:

salias-max-implicit-fields
The maximum number of fields in a variable without direct structure accesses for which structure aliasing will consider trying to track each field. The default is 5
salias-max-array-elements
The maximum number of elements an array can have and its elements still be tracked individually by structure aliasing. The default is 4
sra-max-structure-size
The maximum structure size, in bytes, at which the scalar replacement of aggregates (SRA) optimization will perform block copies. The default value, 0, implies that GCC will select the most appropriate size itself.
sra-field-structure-ratio
The threshold ratio (as a percentage) between instantiated fields and the complete structure size. We say that if the ratio of the number of bytes in instantiated fields to the number of bytes in the complete structure exceeds this parameter, then block copies are not used. The default is 75.
struct-reorg-cold-struct-ratio
The threshold ratio (as a percentage) between a structure frequency and the frequency of the hottest structure in the program. This parameter is used by struct-reorg optimization enabled by -fipa-struct-reorg. We say that if the ratio of a structure frequency, calculated by profiling, to the hottest structure frequency in the program is less than this parameter, then structure reorganization is not applied to this structure. The default is 10.
max-crossjump-edges
The maximum number of incoming edges to consider for crossjumping. The algorithm used by -fcrossjumping is O(N^2) in the number of edges incoming to each block. Increasing values mean more aggressive optimization, making the compile time increase with probably small improvement in executable size.
min-crossjump-insns
The minimum number of instructions which must be matched at the end of two blocks before crossjumping will be performed on them. This value is ignored in the case where all instructions in the block being crossjumped from are matched. The default value is 5.
max-grow-copy-bb-insns
The maximum code size expansion factor when copying basic blocks instead of jumping. The expansion is relative to a jump instruction. The default value is 8.
max-goto-duplication-insns
The maximum number of instructions to duplicate to a block that jumps to a computed goto. To avoid O(N^2) behavior in a number of passes, GCC factors computed gotos early in the compilation process, and unfactors them as late as possible. Only computed jumps at the end of a basic blocks with no more than max-goto-duplication-insns are unfactored. The default value is 8.
max-delay-slot-insn-search
The maximum number of instructions to consider when looking for an instruction to fill a delay slot. If more than this arbitrary number of instructions is searched, the time savings from filling the delay slot will be minimal so stop searching. Increasing values mean more aggressive optimization, making the compile time increase with probably small improvement in executable run time.
max-delay-slot-live-search
When trying to fill delay slots, the maximum number of instructions to consider when searching for a block with valid live register information. Increasing this arbitrarily chosen value means more aggressive optimization, increasing the compile time. This parameter should be removed when the delay slot code is rewritten to maintain the control-flow graph.
max-gcse-memory
The approximate maximum amount of memory that will be allocated in order to perform the global common subexpression elimination optimization. If more memory than specified is required, the optimization will not be done.
max-gcse-passes
The maximum number of passes of GCSE to run. The default is 1.
max-pending-list-length
The maximum number of pending dependencies scheduling will allow before flushing the current state and starting over. Large functions with few branches or calls can create excessively large lists which needlessly consume memory and resources.
max-inline-insns-single
Several parameters control the tree inliner used in gcc. This number sets the maximum number of instructions (counted in GCC's internal representation) in a single function that the tree inliner will consider for inlining. This only affects functions declared inline and methods implemented in a class declaration (C++). The default value is 450.
max-inline-insns-auto
When you use -finline-functions (included in -O3), a lot of functions that would otherwise not be considered for inlining by the compiler will be investigated. To those functions, a different (more restrictive) limit compared to functions declared inline can be applied. The default value is 90.
large-function-insns
The limit specifying really large functions. For functions larger than this limit after inlining inlining is constrained by --param large-function-growth. This parameter is useful primarily to avoid extreme compilation time caused by non-linear algorithms used by the backend. This parameter is ignored when -funit-at-a-time is not used. The default value is 2700.
large-function-growth
Specifies maximal growth of large function caused by inlining in percents. This parameter is ignored when -funit-at-a-time is not used. The default value is 100 which limits large function growth to 2.0 times the original size.
large-unit-insns
The limit specifying large translation unit. Growth caused by inlining of units larger than this limit is limited by --param inline-unit-growth. For small units this might be too tight (consider unit consisting of function A that is inline and B that just calls A three time. If B is small relative to A, the growth of unit is 300\% and yet such inlining is very sane. For very large units consisting of small inlineable functions however the overall unit growth limit is needed to avoid exponential explosion of code size. Thus for smaller units, the size is increased to --param large-unit-insns before applying --param inline-unit-growth. The default is 10000
inline-unit-growth
Specifies maximal overall growth of the compilation unit caused by inlining. This parameter is ignored when -funit-at-a-time is not used. The default value is 30 which limits unit growth to 1.3 times the original size.
large-stack-frame
The limit specifying large stack frames. While inlining the algorithm is trying to not grow past this limit too much. Default value is 256 bytes.
large-stack-frame-growth
Specifies maximal growth of large stack frames caused by inlining in percents. The default value is 1000 which limits large stack frame growth to 11 times the original size.
max-inline-insns-recursive
max-inline-insns-recursive-auto
Specifies maximum number of instructions out-of-line copy of self recursive inline function can grow into by performing recursive inlining.

For functions declared inline --param max-inline-insns-recursive is taken into account. For function not declared inline, recursive inlining happens only when -finline-functions (included in -O3) is enabled and --param max-inline-insns-recursive-auto is used. The default value is 450.

max-inline-recursive-depth
max-inline-recursive-depth-auto
Specifies maximum recursion depth used by the recursive inlining.

For functions declared inline --param max-inline-recursive-depth is taken into account. For function not declared inline, recursive inlining happens only when -finline-functions (included in -O3) is enabled and --param max-inline-recursive-depth-auto is used. The default value is 8.

min-inline-recursive-probability
Recursive inlining is profitable only for function having deep recursion in average and can hurt for function having little recursion depth by increasing the prologue size or complexity of function body to other optimizers.

When profile feedback is available (see -fprofile-generate) the actual recursion depth can be guessed from probability that function will recurse via given call expression. This parameter limits inlining only to call expression whose probability exceeds given threshold (in percents). The default value is 10.

inline-call-cost
Specify cost of call instruction relative to simple arithmetics operations (having cost of 1). Increasing this cost disqualifies inlining of non-leaf functions and at the same time increases size of leaf function that is believed to reduce function size by being inlined. In effect it increases amount of inlining for code having large abstraction penalty (many functions that just pass the arguments to other functions) and decrease inlining for code with low abstraction penalty. The default value is 12.
min-vect-loop-bound
The minimum number of iterations under which a loop will not get vectorized when -ftree-vectorize is used. The number of iterations after vectorization needs to be greater than the value specified by this option to allow vectorization. The default value is 0.
max-unrolled-insns
The maximum number of instructions that a loop should have if that loop is unrolled, and if the loop is unrolled, it determines how many times the loop code is unrolled.
max-average-unrolled-insns
The maximum number of instructions biased by probabilities of their execution that a loop should have if that loop is unrolled, and if the loop is unrolled, it determines how many times the loop code is unrolled.
max-unroll-times
The maximum number of unrollings of a single loop.
max-peeled-insns
The maximum number of instructions that a loop should have if that loop is peeled, and if the loop is peeled, it determines how many times the loop code is peeled.
max-peel-times
The maximum number of peelings of a single loop.
max-completely-peeled-insns
The maximum number of insns of a completely peeled loop.
max-completely-peel-times
The maximum number of iterations of a loop to be suitable for complete peeling.
max-unswitch-insns
The maximum number of insns of an unswitched loop.
max-unswitch-level
The maximum number of branches unswitched in a single loop.
lim-expensive
The minimum cost of an expensive expression in the loop invariant motion.
iv-consider-all-candidates-bound
Bound on number of candidates for induction variables below that all candidates are considered for each use in induction variable optimizations. Only the most relevant candidates are considered if there are more candidates, to avoid quadratic time complexity.
iv-max-considered-uses
The induction variable optimizations give up on loops that contain more induction variable uses.
iv-always-prune-cand-set-bound
If number of candidates in the set is smaller than this value, we always try to remove unnecessary ivs from the set during its optimization when a new iv is added to the set.
scev-max-expr-size
Bound on size of expressions used in the scalar evolutions analyzer. Large expressions slow the analyzer.
omega-max-vars
The maximum number of variables in an Omega constraint system. The default value is 128.
omega-max-geqs
The maximum number of inequalities in an Omega constraint system. The default value is 256.
omega-max-eqs
The maximum number of equalities in an Omega constraint system. The default value is 128.
omega-max-wild-cards
The maximum number of wildcard variables that the Omega solver will be able to insert. The default value is 18.
omega-hash-table-size
The size of the hash table in the Omega solver. The default value is 550.
omega-max-keys
The maximal number of keys used by the Omega solver. The default value is 500.
omega-eliminate-redundant-constraints
When set to 1, use expensive methods to eliminate all redundant constraints. The default value is 0.
vect-max-version-for-alignment-checks
The maximum number of runtime checks that can be performed when doing loop versioning for alignment in the vectorizer. See option ftree-vect-loop-version for more information.
vect-max-version-for-alias-checks
The maximum number of runtime checks that can be performed when doing loop versioning for alias in the vectorizer. See option ftree-vect-loop-version for more information.
max-iterations-to-track
The maximum number of iterations of a loop the brute force algorithm for analysis of # of iterations of the loop tries to evaluate.
hot-bb-count-fraction
Select fraction of the maximal count of repetitions of basic block in program given basic block needs to have to be considered hot.
hot-bb-frequency-fraction
Select fraction of the maximal frequency of executions of basic block in function given basic block needs to have to be considered hot
max-predicted-iterations
The maximum number of loop iterations we predict statically. This is useful in cases where function contain single loop with known bound and other loop with unknown. We predict the known number of iterations correctly, while the unknown number of iterations average to roughly 10. This means that the loop without bounds would appear artificially cold relative to the other one.
align-threshold
Select fraction of the maximal frequency of executions of basic block in function given basic block will get aligned.
align-loop-iterations
A loop expected to iterate at lest the selected number of iterations will get aligned.
tracer-dynamic-coverage
tracer-dynamic-coverage-feedback
This value is used to limit superblock formation once the given percentage of executed instructions is covered. This limits unnecessary code size expansion.

The tracer-dynamic-coverage-feedback is used only when profile feedback is available. The real profiles (as opposed to statically estimated ones) are much less balanced allowing the threshold to be larger value.

tracer-max-code-growth
Stop tail duplication once code growth has reached given percentage. This is rather hokey argument, as most of the duplicates will be eliminated later in cross jumping, so it may be set to much higher values than is the desired code growth.
tracer-min-branch-ratio
Stop reverse growth when the reverse probability of best edge is less than this threshold (in percent).
tracer-min-branch-ratio
tracer-min-branch-ratio-feedback
Stop forward growth if the best edge do have probability lower than this threshold.

Similarly to tracer-dynamic-coverage two values are present, one for compilation for profile feedback and one for compilation without. The value for compilation with profile feedback needs to be more conservative (higher) in order to make tracer effective.

max-cse-path-length
Maximum number of basic blocks on path that cse considers. The default is 10.
max-cse-insns
The maximum instructions CSE process before flushing. The default is 1000.
max-aliased-vops
Maximum number of virtual operands per function allowed to represent aliases before triggering the alias partitioning heuristic. Alias partitioning reduces compile times and memory consumption needed for aliasing at the expense of precision loss in alias information. The default value for this parameter is 100 for -O1, 500 for -O2 and 1000 for -O3.

Notice that if a function contains more memory statements than the value of this parameter, it is not really possible to achieve this reduction. In this case, the compiler will use the number of memory statements as the value for max-aliased-vops.

avg-aliased-vops
Average number of virtual operands per statement allowed to represent aliases before triggering the alias partitioning heuristic. This works in conjunction with max-aliased-vops. If a function contains more than max-aliased-vops virtual operators, then memory symbols will be grouped into memory partitions until either the total number of virtual operators is below max-aliased-vops or the average number of virtual operators per memory statement is below avg-aliased-vops. The default value for this parameter is 1 for -O1 and -O2, and 3 for -O3.
ggc-min-expand
GCC uses a garbage collector to manage its own memory allocation. This parameter specifies the minimum percentage by which the garbage collector's heap should be allowed to expand between collections. Tuning this may improve compilation speed; it has no effect on code generation.

The default is 30% + 70% * (RAM/1GB) with an upper bound of 100% when RAM >= 1GB. If getrlimit is available, the notion of "RAM" is the smallest of actual RAM and RLIMIT_DATA or RLIMIT_AS. If GCC is not able to calculate RAM on a particular platform, the lower bound of 30% is used. Setting this parameter and ggc-min-heapsize to zero causes a full collection to occur at every opportunity. This is extremely slow, but can be useful for debugging.

ggc-min-heapsize
Minimum size of the garbage collector's heap before it begins bothering to collect garbage. The first collection occurs after the heap expands by ggc-min-expand% beyond ggc-min-heapsize. Again, tuning this may improve compilation speed, and has no effect on code generation.

The default is the smaller of RAM/8, RLIMIT_RSS, or a limit which tries to ensure that RLIMIT_DATA or RLIMIT_AS are not exceeded, but with a lower bound of 4096 (four megabytes) and an upper bound of 131072 (128 megabytes). If GCC is not able to calculate RAM on a particular platform, the lower bound is used. Setting this parameter very large effectively disables garbage collection. Setting this parameter and ggc-min-expand to zero causes a full collection to occur at every opportunity.

max-reload-search-insns
The maximum number of instruction reload should look backward for equivalent register. Increasing values mean more aggressive optimization, making the compile time increase with probably slightly better performance. The default value is 100.
max-cselib-memory-locations
The maximum number of memory locations cselib should take into account. Increasing values mean more aggressive optimization, making the compile time increase with probably slightly better performance. The default value is 500.
max-flow-memory-locations
Similar as max-cselib-memory-locations but for dataflow liveness. The default value is 100.
reorder-blocks-duplicate
reorder-blocks-duplicate-feedback
Used by basic block reordering pass to decide whether to use unconditional branch or duplicate the code on its destination. Code is duplicated when its estimated size is smaller than this value multiplied by the estimated size of unconditional jump in the hot spots of the program.

The reorder-block-duplicate-feedback is used only when profile feedback is available and may be set to higher values than reorder-block-duplicate since information about the hot spots is more accurate.

max-sched-ready-insns
The maximum number of instructions ready to be issued the scheduler should consider at any given time during the first scheduling pass. Increasing values mean more thorough searches, making the compilation time increase with probably little benefit. The default value is 100.
max-sched-region-blocks
The maximum number of blocks in a region to be considered for interblock scheduling. The default value is 10.
max-sched-region-insns
The maximum number of insns in a region to be considered for interblock scheduling. The default value is 100.
min-spec-prob
The minimum probability (in percents) of reaching a source block for interblock speculative scheduling. The default value is 40.
max-sched-extend-regions-iters
The maximum number of iterations through CFG to extend regions. 0 - disable region extension, N - do at most N iterations. The default value is 0.
max-sched-insn-conflict-delay
The maximum conflict delay for an insn to be considered for speculative motion. The default value is 3.
sched-spec-prob-cutoff
The minimal probability of speculation success (in percents), so that speculative insn will be scheduled. The default value is 40.
max-last-value-rtl
The maximum size measured as number of RTLs that can be recorded in an expression in combiner for a pseudo register as last known value of that register. The default is 10000.
integer-share-limit
Small integer constants can use a shared data structure, reducing the compiler's memory usage and increasing its speed. This sets the maximum value of a shared integer constant. The default value is 256.
min-virtual-mappings
Specifies the minimum number of virtual mappings in the incremental SSA updater that should be registered to trigger the virtual mappings heuristic defined by virtual-mappings-ratio. The default value is 100.
virtual-mappings-ratio
If the number of virtual mappings is virtual-mappings-ratio bigger than the number of virtual symbols to be updated, then the incremental SSA updater switches to a full update for those symbols. The default ratio is 3.
ssp-buffer-size
The minimum size of buffers (i.e. arrays) that will receive stack smashing protection when -fstack-protection is used.
max-jump-thread-duplication-stmts
Maximum number of statements allowed in a block that needs to be duplicated when threading jumps.
max-fields-for-field-sensitive
Maximum number of fields in a structure we will treat in a field sensitive manner during pointer analysis.
prefetch-latency
Estimate on average number of instructions that are executed before prefetch finishes. The distance we prefetch ahead is proportional to this constant. Increasing this number may also lead to less streams being prefetched (see simultaneous-prefetches).
simultaneous-prefetches
Maximum number of prefetches that can run at the same time.
l1-cache-line-size
The size of cache line in L1 cache, in bytes.
l1-cache-size
The size of L1 cache, in kilobytes.
l2-cache-size
The size of L2 cache, in kilobytes.
use-canonical-types
Whether the compiler should use the “canonical” type system. By default, this should always be 1, which uses a more efficient internal mechanism for comparing types in C++ and Objective-C++. However, if bugs in the canonical type system are causing compilation failures, set this value to 0 to disable canonical types.
max-partial-antic-length
Maximum length of the partial antic set computed during the tree partial redundancy elimination optimization (-ftree-pre) when optimizing at -O3 and above. For some sorts of source code the enhanced partial redundancy elimination optimization can run away, consuming all of the memory available on the host machine. This parameter sets a limit on the length of the sets that are computed, which prevents the runaway behaviour. Setting a value of 0 for this paramter will allow an unlimited set length.
sccvn-max-scc-size
Maximum size of a strongly connected component (SCC) during SCCVN processing. If this limit is hit, SCCVN processing for the whole function will not be done and optimizations depending on it will be disabled. The default maximum SCC size is 10000.