This is the mail archive of the
mailing list for the GCC project.
Re: [Patch 0,1a] Improving effectiveness and generality of autovectorization using unified representation.
- From: Richard Biener <richard dot guenther at gmail dot com>
- To: Sameera Deshpande <Sameera dot Deshpande at imgtec dot com>
- Cc: Matthew Fortune <Matthew dot Fortune at imgtec dot com>, Rich Fuhler <Rich dot Fuhler at imgtec dot com>, Prachi Godbole <Prachi dot Godbole at imgtec dot com>, "gcc at gcc dot gnu dot org" <gcc at gcc dot gnu dot org>, Jaydeep Patil <Jaydeep dot Patil at imgtec dot com>
- Date: Thu, 9 Jun 2016 14:15:01 +0200
- Subject: Re: [Patch 0,1a] Improving effectiveness and generality of autovectorization using unified representation.
- Authentication-results: sourceware.org; auth=none
- References: <38C8F1E431EDD94A82971C543A11B4FE7473C322 at PUMAIL01 dot pu dot imgtec dot org> <CAFiYyc0FsdU9urxReim+1XOYGMoMuw7XOLPgdqqeVTn=DhsW9Q at mail dot gmail dot com>
On Thu, Jun 9, 2016 at 10:54 AM, Richard Biener
> On Tue, Jun 7, 2016 at 3:59 PM, Sameera Deshpande
> <Sameera.Deshpande@imgtec.com> wrote:
>> Hi Richard,
>> This is with reference to our discussion at GNU Tools Cauldron 2015 regarding my talk titled "Improving the effectiveness and generality of GCC auto-vectorization." Further to our prototype implementation of the concept, we have started implementing this concept in GCC.
>> We are following incremental model to add language support in our front-end, and corresponding back-end (for auto-vectorizer) will be added for feature completion.
>> Looking at the complexity and scale of the project, we have divided this project into subtasks listed below, for ease of implementation, testing and review.
>> 0. Add new pass to perform autovectorization using unified representation - Current GCC framework does not give complete overview of the loop to be vectorized : it either breaks the loop across body, or across iterations. Because of which these data structures can not be reused for our approach which gathers all the information of loop body at one place using primitive permute operations. Hence, define new data structures and populate them.
>> 1. Add support for vectorization of LOAD/STORE instructions
>> a. Create permute order tree for the loop with LOAD and STORE instructions for single or multi-dimensional arrays, aggregates within nested loops.
>> b. Basic transformation phase to generate vectorized code for the primitive reorder tree generated at stage 1a using tree tiling algorithm. This phase handles code generation for SCATTER, GATHER, stridded memory accesses etc. along with permute instruction generation.
>> 2. Implementation of k-arity promotion/reduction : The permute nodes within primitive reorder tree generated from input program can have any arity. However, the target can support maximum of arity = 2 in most of the cases. Hence, we need to promote or reduce the arity of permute order tree to enable successful tree tiling.
>> 3. Vector size reduction : Depending upon the vector size for target, reduce vector size per statement and adjust the loop count for vectorized loop accordingly.
>> 4. Support simple arithmetic operations :
>> a. Add support for analyzing statements with simple arithmetic operations like +, -, *, / for vectorization, and create primitive reorder tree with compute_op.
>> b. Generate vector code for primitive reorder tree generated at stage 4a using tree tiling algorithm - here support for complex patterns like multiply-add should be checked and appropriate instruction to be generated.
>> 5. Support reduction operation :
>> a. Add support for reduction operation analysis and primitive reorder tree generation. The reduction operation needs special handling, as the finish statement should COLLAPSE the temporary reduction vector TEMP_VAR into original reduction variable.
>> b. The code generation for primitive reorder tree does not need any handling - as reduction tree is same as tree generated in 4a, with only difference that in 4a, the destination is MEMREF (because of STORE operation) and for reduction it is TEMP_VAR. At this stage, generate code for COLLAPSE node in finish statements.
>> 6. Support other vectorizable statements like complex arithmetic operations, bitwise operations, type conversions etc.
>> a. Add support for analysis and primitive reorder tree generation.
>> b. Vector code generation.
>> 7. Cost effective tree tiling algorithm : Till now, the tree tiling is happening without considering cost of computation. However, there can be multiple target instructions covering the tree - hence, instead of picking first matched largest instruction cover, select the instruction cover based on cost of instruction given in .md for the target.
>> 8. Optimizations on created primitive reorder tree : This stage is open ended, and depending upon perf analysis, the scope of it can be defined.
>> The current patch I have attached herewith handles stage 0 and 1a : Adds new pass to perform autovectorization using unified representation, defines new data structures to cater to this requirement and creates primitive reorder tree for LOAD/STORE instructions within the loop.
>> The whole loop is represented using the ITER_NODE, which have information about
>> - The preparatory statements for vectorization to be executed before entering the loop (like initialization of vectors, prepping for reduction operations, peeling etc.)
>> - Vectorizable loop body represented as PRIMOP_TREE (primitive reordering tree)
>> - Final statements (For peeling, variable loop bound, COLLAPSE operation for reduction etc.)
>> - Other loop attributes (loop bound, peeling needed, dependences, etc.)
>> Memory accesses within a loop have definite repetitive pattern which can be captured using primitive permute operators which can be used to determine desired permute order for the vector computations. The PRIMOP_TREE is AST which records all computations and permutations required to store destination vector into continuous memory at the end of all iterations of the loop. It can have INTERLEAVE, CONCAT, EXTRACT, SPLIT, ITER or any compute operation as intermediate node. Leaf nodes can either be memory reference, constant or vector of loop invariants. Depending upon the operation, PRIMOP_TREE holds appropriate information about the statement within the loop which is necessary for vectorization.
>> At this stage, these data structures are populated by gathering all the information of the loop, statements within the loop and correlation of the statements within the loop. Moreover the loop body is analyzed to check if vectorization of each statement is possible. One has to note however that this analysis phase will give worst-case estimate of instruction selection, as it checks if specific named pattern is defined in .md for the target. It not necessarily give optimal cover which is aim of the transformation phase using tree tiling algorithm - and can be invoked only once the loop body is represented using primitive reoder tree.
>> At this stage, the focus is to create permute order tree for the loop with LOAD and STORE instructions only. The code we intend to compile is of the form
>> FOR(i = 0; i < N; i + +)
>> stmt 1 : D[k â i + d 1 ] =S 1 [k â i + c 11 ]
>> stmt 2 : D[k â i + d 2 ] =S 1 [k â i + c 21 ]
>> stmt k : D[k â i + d k ] =S 1 [k â i + c k 1 ]
>> Here we are assuming that any data reference can be represented using base + k * index + offset (The data structure struct data_reference from GCC is used currently for this purpose). If not, the address is normalized to convert to such representation.
>> We are looking forward to your suggestions and insight in this regard for better execution of this project.
> I will look at the patch in detail this afternoon and will write up
> some comments.
Ok, so here we go.
I see you copy quite some code from the existing vectorizer - rather than
doing this and adding a "new" pass I'd make the flag_tree_loop_vectorize_unified
flag guard code inside the existing vectorizer - thus share the pass.
Similarly I'd re-use loop_vinfo and simply add fields to it for the
so you can dispatch to existing vectorizer functions "easily". Otherwise
it's going to be hard to keep things in-sync. Likewise for your stmt_attr
and the existing stmt_vec_info.
Why isn't the existing data_reference structure good enough and you need
to invent a struct mem_ref? Even if that might be leaner adding new concepts
makes the code harder to understand. You can always use dr->aux to
add auxiliar data you need (like the existing vectorizer does).
It helps if you follow the GCC coding-conventions from the start - a lot
of the new functions miss comments.
I realize the patch is probably still a "hack" and nowhere a final step 0/1a,
but for example you copied the iteration scheme over vector sizes. I hope
the new vectorizer can do without that and instead decide on the vector
size as part of the cost effective tiling algorithm.
As the main feature of the patch is creation of the ptree (no code generation
seems to be done?) the biggest missing part is dumping the ptree in
some nice form (like in DOT format and/or to the dump file).
You do seem to check for target capabilities at ptree build time (looking at
vectorizable_store). I think that is a mistake as we'd ideally have the same
ptree when considering different vector sizes (or even generic vectors).
Target capabilities will differ between vector sizes.
That's all for now.
Last but not least - at the Cauldron I suggested to incrementally rewrite
the existing vectorizer by building the ptree at the point it is "ready"
for code generation and perform the permute optimizations on it and then
re-write the code generation routines to work off the ptree.