This is the mail archive of the
gcc@gcc.gnu.org
mailing list for the GCC project.
gcc 4.3.0 build; I built the g++ compiler, but there are no header files and no C++ libraries
- From: chris kuhlman <ckuhlman at vbi dot vt dot edu>
- To: gcc at gcc dot gnu dot org
- Date: Wed, 14 May 2008 06:49:53 -0400
- Subject: gcc 4.3.0 build; I built the g++ compiler, but there are no header files and no C++ libraries
- Authentication-results: almaren.bioinformatics.vt.edu from=ckuhlman@vbi.vt.edu; sender-id=softfail; spf=softfail
Hello:
I wrote to the help gcc site and got no response, so I am writing here.
Help would be immensely appreciated.
I am trying to build GCC 4.3.0. I built GMP 4.2.2 and MPFR 2.3.1,
and then I built GCC 4.3.0. Everything appeared to go fine. I
installed compilers for C, C++, and Fortran.
To configure, I did:
../src-gcc-4.3.0/gcc-4.3.0/configure
--prefix=/home/simsci1/share/gcc-4.3.0/
--with-gmp=/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec/
--with-mpfr=/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1/
--enable-version-specific-runtime-libs
Then I did
make
and then
make install
(The config.log file is attached.)
I then made up and ran some very simple C, C++, and Fortran codes, and
they compiled and ran.
However, I now look in the GCC 4.3.0 install directory, and under
include there
are no header files for C++, as detailed below. The include directory
is empty. Also, under the bin directory, there are files suspiciously
missing, like libstdc++.a, libstdc++.la, libstdc++.so.6.0.7,
libsupc++.a, libsupc++.la, and libgcc_s.so.1.
Yet, under the bin directory, the g++ and gfortran compiler executables
exist and work (at least for small codes), as well as the gcc compiler.
So, how can the compiler be installed correctly, but not the header
files and not the libraries for C++?
I used GCC 4.1.0 to build GCC 4.3.0. So I looked under the install
directory for GCC 4.1.0, and under the include directory for GCC 4.1.0,
there is a c++ directory and a file called mf-runtime.h. Under the c++
directory is a directory called 4.1.0 and that directory appears to have
all of the C++
header files.
Do you know why I did not generate the include directory and header
files, and the libraries under the lib directory,
when I generated the g++ compiler itself?
Thank you.
chris
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ ../src-gcc-4.3.0/gcc-4.3.0/configure --prefix=/home/simsci1/share/gcc-4.3.0/ --with-gmp=/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec/ --with-mpfr=/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1/ --enable-version-specific-runtime-libs
## --------- ##
## Platform. ##
## --------- ##
hostname = compute-4-8.local
uname -m = i686
uname -r = 2.6.9-22.0.2.ELsmp
uname -s = Linux
uname -v = #1 SMP Tue Jan 17 07:10:04 CST 2006
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = i686
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/simsci1/share/gcc-4.1.0/bin
PATH: /home/simsci1/share/gcc-4.1.0/lib
PATH: /home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec
PATH: /home/simsci1/share/gcc-4.1.0/bin
PATH: /home/simsci1/share/gcc-4.1.0/lib
PATH: /home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec
PATH: /home/simsci1/share/gcc-4.1.0/bin
PATH: /home/simsci1/share/gcc-4.1.0/lib
PATH: /home/simsci3/users/ckuhlman/gcc-4.3.0/gmp/install_exec
PATH: /opt/gridengine/bin/glinux
PATH: /usr/kerberos/bin
PATH: /usr/local/bin
PATH: /bin
PATH: /usr/bin
PATH: /usr/X11R6/bin
PATH: /opt/ganglia/bin
PATH: /usr/java/jdk1.5.0/bin
PATH: /opt/rocks/bin
PATH: /opt/rocks/sbin
PATH: /home/ckuhlman/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1505: checking build system type
configure:1523: result: i686-pc-linux-gnu
configure:1558: checking host system type
configure:1572: result: i686-pc-linux-gnu
configure:1580: checking target system type
configure:1594: result: i686-pc-linux-gnu
configure:1637: checking for a BSD-compatible install
configure:1692: result: /usr/bin/install -c
configure:1703: checking whether ln works
configure:1725: result: yes
configure:1729: checking whether ln -s works
configure:1733: result: yes
configure:2885: checking for gcc
configure:2901: found /home/simsci1/share/gcc-4.1.0/bin/gcc
configure:2911: result: gcc
configure:3155: checking for C compiler version
configure:3158: gcc --version </dev/null >&5
gcc (GCC) 4.1.0
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3161: $? = 0
configure:3163: gcc -v </dev/null >&5
Using built-in specs.
Target: i686-pc-linux-gnu
Configured with: ../gcc-4.1.0-src/configure --prefix=/home/simsci1/share/gcc-4.1.0 --enable-languages=c,c++
Thread model: posix
gcc version 4.1.0
configure:3166: $? = 0
configure:3168: gcc -V </dev/null >&5
gcc: '-V' option must have argument
configure:3171: $? = 1
configure:3194: checking for C compiler default output file name
configure:3197: gcc conftest.c >&5
configure:3200: $? = 0
configure:3246: result: a.out
configure:3251: checking whether the C compiler works
configure:3257: ./a.out
configure:3260: $? = 0
configure:3277: result: yes
configure:3284: checking whether we are cross compiling
configure:3286: result: no
configure:3289: checking for suffix of executables
configure:3291: gcc -o conftest conftest.c >&5
configure:3294: $? = 0
configure:3319: result:
configure:3325: checking for suffix of object files
configure:3346: gcc -c conftest.c >&5
configure:3349: $? = 0
configure:3371: result: o
configure:3375: checking whether we are using the GNU C compiler
configure:3399: gcc -c conftest.c >&5
configure:3405: $? = 0
configure:3409: test -z
|| test ! -s conftest.err
configure:3412: $? = 0
configure:3415: test -s conftest.o
configure:3418: $? = 0
configure:3431: result: yes
configure:3437: checking whether gcc accepts -g
configure:3458: gcc -c -g conftest.c >&5
configure:3464: $? = 0
configure:3468: test -z
|| test ! -s conftest.err
configure:3471: $? = 0
configure:3474: test -s conftest.o
configure:3477: $? = 0
configure:3488: result: yes
configure:3505: checking for gcc option to accept ANSI C
configure:3575: gcc -c -g -O2 conftest.c >&5
configure:3581: $? = 0
configure:3585: test -z
|| test ! -s conftest.err
configure:3588: $? = 0
configure:3591: test -s conftest.o
configure:3594: $? = 0
configure:3612: result: none needed
configure:3630: gcc -c -g -O2 conftest.c >&5
conftest.c:2: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'me'
configure:3636: $? = 1
configure: failed program was:
| #ifndef __cplusplus
| choke me
| #endif
configure:3821: checking for g++
configure:3837: found /home/simsci1/share/gcc-4.1.0/bin/g++
configure:3847: result: g++
configure:3863: checking for C++ compiler version
configure:3866: g++ --version </dev/null >&5
g++ (GCC) 4.1.0
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3869: $? = 0
configure:3871: g++ -v </dev/null >&5
Using built-in specs.
Target: i686-pc-linux-gnu
Configured with: ../gcc-4.1.0-src/configure --prefix=/home/simsci1/share/gcc-4.1.0 --enable-languages=c,c++
Thread model: posix
gcc version 4.1.0
configure:3874: $? = 0
configure:3876: g++ -V </dev/null >&5
g++: '-V' option must have argument
configure:3879: $? = 1
configure:3882: checking whether we are using the GNU C++ compiler
configure:3906: g++ -c conftest.cc >&5
configure:3912: $? = 0
configure:3916: test -z
|| test ! -s conftest.err
configure:3919: $? = 0
configure:3922: test -s conftest.o
configure:3925: $? = 0
configure:3938: result: yes
configure:3944: checking whether g++ accepts -g
configure:3965: g++ -c -g conftest.cc >&5
configure:3971: $? = 0
configure:3975: test -z
|| test ! -s conftest.err
configure:3978: $? = 0
configure:3981: test -s conftest.o
configure:3984: $? = 0
configure:3995: result: yes
configure:4037: g++ -c -g -O2 conftest.cc >&5
configure:4043: $? = 0
configure:4047: test -z
|| test ! -s conftest.err
configure:4050: $? = 0
configure:4053: test -s conftest.o
configure:4056: $? = 0
configure:4082: g++ -c -g -O2 conftest.cc >&5
conftest.cc: In function 'int main()':
conftest.cc:13: error: 'exit' was not declared in this scope
configure:4088: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
|
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:4037: g++ -c -g -O2 conftest.cc >&5
configure:4043: $? = 0
configure:4047: test -z
|| test ! -s conftest.err
configure:4050: $? = 0
configure:4053: test -s conftest.o
configure:4056: $? = 0
configure:4082: g++ -c -g -O2 conftest.cc >&5
configure:4088: $? = 0
configure:4092: test -z
|| test ! -s conftest.err
configure:4095: $? = 0
configure:4098: test -s conftest.o
configure:4101: $? = 0
configure:4188: checking for gnatbind
configure:4215: result: no
configure:4268: checking for gnatmake
configure:4295: result: no
configure:4307: checking whether compiler driver understands Ada
configure:4330: result: no
configure:4339: checking how to compare bootstrapped objects
configure:4364: result: cmp --ignore-initial=16 $$f1 $$f2
configure:4484: checking for correct version of gmp.h
configure:4507: gcc -c -g -O2 -I/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec//include -I/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1//include conftest.c >&5
configure:4513: $? = 0
configure:4517: test -z
|| test ! -s conftest.err
configure:4520: $? = 0
configure:4523: test -s conftest.o
configure:4526: $? = 0
configure:4528: result: yes
configure:4542: checking for correct version of mpfr.h
configure:4573: gcc -o conftest -g -O2 -I/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec//include -I/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1//include conftest.c -L/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec//lib -L/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1//lib -lmpfr -lgmp >&5
configure:4579: $? = 0
configure:4583: test -z
|| test ! -s conftest.err
configure:4586: $? = 0
configure:4589: test -s conftest
configure:4592: $? = 0
configure:4616: gcc -o conftest -g -O2 -I/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec//include -I/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1//include conftest.c -L/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec//lib -L/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1//lib -lmpfr -lgmp >&5
configure:4622: $? = 0
configure:4626: test -z
|| test ! -s conftest.err
configure:4629: $? = 0
configure:4632: test -s conftest
configure:4635: $? = 0
configure:4637: result: yes
configure:5971: checking for bison
configure:6000: result: no
configure:5971: checking for byacc
configure:6000: result: no
configure:5971: checking for yacc
configure:6000: result: no
configure:6017: checking for bison
configure:6046: result: no
configure:6062: checking for gm4
configure:6091: result: no
configure:6062: checking for gnum4
configure:6091: result: no
configure:6062: checking for m4
configure:6078: found /usr/bin/m4
configure:6088: result: m4
configure:6107: checking for flex
configure:6136: result: no
configure:6107: checking for lex
configure:6136: result: no
configure:6153: checking for flex
configure:6182: result: no
configure:6198: checking for makeinfo
configure:6227: result: no
configure:6257: checking for expect
configure:6273: found /usr/bin/expect
configure:6283: result: expect
configure:6304: checking for runtest
configure:6333: result: no
configure:6443: checking for ar
configure:6459: found /usr/bin/ar
configure:6469: result: ar
configure:6578: checking for as
configure:6594: found /usr/bin/as
configure:6604: result: as
configure:6713: checking for dlltool
configure:6742: result: no
configure:6848: checking for ld
configure:6864: found /usr/bin/ld
configure:6874: result: ld
configure:6983: checking for lipo
configure:7012: result: no
configure:7118: checking for nm
configure:7134: found /usr/bin/nm
configure:7144: result: nm
configure:7253: checking for ranlib
configure:7269: found /usr/bin/ranlib
configure:7279: result: ranlib
configure:7383: checking for strip
configure:7399: found /usr/bin/strip
configure:7409: result: strip
configure:7513: checking for windres
configure:7542: result: no
configure:7648: checking for windmc
configure:7677: result: no
configure:7783: checking for objcopy
configure:7799: found /usr/bin/objcopy
configure:7809: result: objcopy
configure:7918: checking for objdump
configure:7934: found /usr/bin/objdump
configure:7944: result: objdump
configure:8092: checking for cc
configure:8108: found /usr/bin/cc
configure:8118: result: cc
configure:8247: checking for c++
configure:8263: found /home/simsci1/share/gcc-4.1.0/bin/c++
configure:8273: result: c++
configure:8402: checking for gcc
configure:8418: found /home/simsci1/share/gcc-4.1.0/bin/gcc
configure:8428: result: gcc
configure:8552: checking for gcj
configure:8581: result: no
configure:8707: checking for gfortran
configure:8736: result: no
configure:8796: checking for ar
configure:8829: result: no
configure:8941: checking for ar
configure:8957: found /usr/bin/ar
configure:8967: result: ar
configure:9019: checking for as
configure:9052: result: no
configure:9164: checking for as
configure:9180: found /usr/bin/as
configure:9190: result: as
configure:9242: checking for dlltool
configure:9275: result: no
configure:9387: checking for dlltool
configure:9416: result: no
configure:9465: checking for ld
configure:9498: result: no
configure:9610: checking for ld
configure:9626: found /usr/bin/ld
configure:9636: result: ld
configure:9688: checking for lipo
configure:9721: result: no
configure:9833: checking for lipo
configure:9862: result: no
configure:9911: checking for nm
configure:9944: result: no
configure:10056: checking for nm
configure:10072: found /usr/bin/nm
configure:10082: result: nm
configure:10134: checking for objdump
configure:10167: result: no
configure:10279: checking for objdump
configure:10295: found /usr/bin/objdump
configure:10305: result: objdump
configure:10357: checking for ranlib
configure:10390: result: no
configure:10502: checking for ranlib
configure:10518: found /usr/bin/ranlib
configure:10528: result: ranlib
configure:10580: checking for strip
configure:10613: result: no
configure:10725: checking for strip
configure:10741: found /usr/bin/strip
configure:10751: result: strip
configure:10803: checking for windres
configure:10836: result: no
configure:10948: checking for windres
configure:10977: result: no
configure:11026: checking for windmc
configure:11059: result: no
configure:11171: checking for windmc
configure:11200: result: no
configure:11227: checking where to find the target ar
configure:11260: result: host tool
configure:11269: checking where to find the target as
configure:11302: result: host tool
configure:11311: checking where to find the target cc
configure:11334: result: just compiled
configure:11353: checking where to find the target c++
configure:11379: result: just compiled
configure:11398: checking where to find the target c++ for libstdc++
configure:11424: result: just compiled
configure:11443: checking where to find the target dlltool
configure:11476: result: host tool
configure:11485: checking where to find the target gcc
configure:11508: result: just compiled
configure:11527: checking where to find the target gcj
configure:11553: result: just compiled
configure:11572: checking where to find the target gfortran
configure:11598: result: just compiled
configure:11617: checking where to find the target ld
configure:11650: result: host tool
configure:11659: checking where to find the target lipo
configure:11681: result: host tool
configure:11690: checking where to find the target nm
configure:11723: result: host tool
configure:11732: checking where to find the target objdump
configure:11765: result: host tool
configure:11774: checking where to find the target ranlib
configure:11807: result: host tool
configure:11816: checking where to find the target strip
configure:11849: result: host tool
configure:11858: checking where to find the target windres
configure:11891: result: host tool
configure:11900: checking where to find the target windmc
configure:11933: result: host tool
configure:11970: checking whether to enable maintainer-specific portions of Makefiles
configure:11979: result: no
configure:12012: checking whether -fkeep-inline-functions is supported
configure:12036: gcc -c -g -O2 -fkeep-inline-functions conftest.c >&5
configure:12042: $? = 0
configure:12046: test -z
|| test ! -s conftest.err
configure:12049: $? = 0
configure:12052: test -s conftest.o
configure:12055: $? = 0
configure:12057: result: yes
configure:12274: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by config.status, which was
generated by GNU Autoconf 2.59. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on compute-4-8.local
config.status:762: creating Makefile
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=i686-pc-linux-gnu
ac_cv_build_alias=i686-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_AR_FOR_TARGET_set=
ac_cv_env_AR_FOR_TARGET_value=
ac_cv_env_AR_set=
ac_cv_env_AR_value=
ac_cv_env_AS_FOR_TARGET_set=
ac_cv_env_AS_FOR_TARGET_value=
ac_cv_env_AS_set=
ac_cv_env_AS_value=
ac_cv_env_CC_FOR_TARGET_set=
ac_cv_env_CC_FOR_TARGET_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_FOR_TARGET_set=
ac_cv_env_CXX_FOR_TARGET_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_DLLTOOL_FOR_TARGET_set=
ac_cv_env_DLLTOOL_FOR_TARGET_value=
ac_cv_env_DLLTOOL_set=
ac_cv_env_DLLTOOL_value=
ac_cv_env_GCC_FOR_TARGET_set=
ac_cv_env_GCC_FOR_TARGET_value=
ac_cv_env_GCJ_FOR_TARGET_set=
ac_cv_env_GCJ_FOR_TARGET_value=
ac_cv_env_GFORTRAN_FOR_TARGET_set=
ac_cv_env_GFORTRAN_FOR_TARGET_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LD_FOR_TARGET_set=
ac_cv_env_LD_FOR_TARGET_value=
ac_cv_env_LD_set=
ac_cv_env_LD_value=
ac_cv_env_LIPO_FOR_TARGET_set=
ac_cv_env_LIPO_FOR_TARGET_value=
ac_cv_env_LIPO_set=
ac_cv_env_LIPO_value=
ac_cv_env_NM_FOR_TARGET_set=
ac_cv_env_NM_FOR_TARGET_value=
ac_cv_env_NM_set=
ac_cv_env_NM_value=
ac_cv_env_OBJCOPY_set=
ac_cv_env_OBJCOPY_value=
ac_cv_env_OBJDUMP_FOR_TARGET_set=
ac_cv_env_OBJDUMP_FOR_TARGET_value=
ac_cv_env_OBJDUMP_set=
ac_cv_env_OBJDUMP_value=
ac_cv_env_RANLIB_FOR_TARGET_set=
ac_cv_env_RANLIB_FOR_TARGET_value=
ac_cv_env_RANLIB_set=
ac_cv_env_RANLIB_value=
ac_cv_env_STRIP_FOR_TARGET_set=
ac_cv_env_STRIP_FOR_TARGET_value=
ac_cv_env_STRIP_set=
ac_cv_env_STRIP_value=
ac_cv_env_WINDMC_FOR_TARGET_set=
ac_cv_env_WINDMC_FOR_TARGET_value=
ac_cv_env_WINDMC_set=
ac_cv_env_WINDMC_value=
ac_cv_env_WINDRES_FOR_TARGET_set=
ac_cv_env_WINDRES_FOR_TARGET_value=
ac_cv_env_WINDRES_set=
ac_cv_env_WINDRES_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_exeext=
ac_cv_host=i686-pc-linux-gnu
ac_cv_host_alias=i686-pc-linux-gnu
ac_cv_objext=o
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AR=ar
ac_cv_prog_AR_FOR_TARGET=ar
ac_cv_prog_AS=as
ac_cv_prog_AS_FOR_TARGET=as
ac_cv_prog_CC_FOR_TARGET=cc
ac_cv_prog_CXX_FOR_TARGET=c++
ac_cv_prog_EXPECT=expect
ac_cv_prog_GCC_FOR_TARGET=gcc
ac_cv_prog_LD=ld
ac_cv_prog_LD_FOR_TARGET=ld
ac_cv_prog_M4=m4
ac_cv_prog_NM=nm
ac_cv_prog_NM_FOR_TARGET=nm
ac_cv_prog_OBJCOPY=objcopy
ac_cv_prog_OBJDUMP=objdump
ac_cv_prog_OBJDUMP_FOR_TARGET=objdump
ac_cv_prog_RANLIB=ranlib
ac_cv_prog_RANLIB_FOR_TARGET=ranlib
ac_cv_prog_STRIP=strip
ac_cv_prog_STRIP_FOR_TARGET=strip
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_CXX=g++
ac_cv_prog_ac_ct_GNATBIND=no
ac_cv_prog_ac_ct_GNATMAKE=no
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_stdc=
ac_cv_prog_cxx_g=yes
ac_cv_target=i686-pc-linux-gnu
ac_cv_target_alias=i686-pc-linux-gnu
acx_cv_cc_gcc_supports_ada=no
acx_cv_prog_LN=ln
gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
gcc_cv_tool_dirs=/home/simsci1/share/gcc-4.3.0//libexec/gcc/i686-pc-linux-gnu/4.3.0:/home/simsci1/share/gcc-4.3.0//libexec/gcc/i686-pc-linux-gnu:/usr/lib/gcc/i686-pc-linux-gnu/4.3.0:/usr/lib/gcc/i686-pc-linux-gnu:/home/simsci1/share/gcc-4.3.0//i686-pc-linux-gnu/bin/i686-pc-linux-gnu/4.3.0:/home/simsci1/share/gcc-4.3.0//i686-pc-linux-gnu/bin:
gcc_cv_tool_prefix=/home/simsci1/share/gcc-4.3.0/
## ----------------- ##
## Output variables. ##
## ----------------- ##
AR='ar'
AR_FOR_BUILD='$(AR)'
AR_FOR_TARGET='$(AR)'
AS='as'
AS_FOR_BUILD='$(AS)'
AS_FOR_TARGET='$(AS)'
BISON='/home/simsci1/share/to-build-gcc_4.3.0/src-gcc-4.3.0/gcc-4.3.0/missing bison'
CC='gcc'
CC_FOR_BUILD='$(CC)'
CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
CFLAGS='-g -O2'
CFLAGS_FOR_BUILD='-g -O2'
COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'
CONFIGURE_GDB_TK=''
CPPFLAGS=''
CXX='g++'
CXXFLAGS='-g -O2'
CXXFLAGS_FOR_BUILD='-g -O2'
CXX_FOR_BUILD='$(CXX)'
CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
DEBUG_PREFIX_CFLAGS_FOR_TARGET=''
DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" '
DLLTOOL='dlltool'
DLLTOOL_FOR_BUILD='$(DLLTOOL)'
DLLTOOL_FOR_TARGET='$(DLLTOOL)'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EXEEXT=''
EXPECT='expect'
FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
FLEX='/home/simsci1/share/to-build-gcc_4.3.0/src-gcc-4.3.0/gcc-4.3.0/missing flex'
GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
GCJ_FOR_BUILD='$(GCJ)'
GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
GDB_TK=''
GFORTRAN_FOR_BUILD='$(GFORTRAN)'
GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
GNATBIND='no'
GNATMAKE='no'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_GDB_TK=''
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
LD='ld'
LDFLAGS=''
LDFLAGS_FOR_BUILD=''
LD_FOR_BUILD='$(LD)'
LD_FOR_TARGET='$(LD)'
LEX='/home/simsci1/share/to-build-gcc_4.3.0/src-gcc-4.3.0/gcc-4.3.0/missing flex'
LIBOBJS=''
LIBS=''
LIPO='lipo'
LIPO_FOR_TARGET='$(LIPO)'
LN='ln'
LN_S='ln -s'
LTLIBOBJS=''
M4='m4'
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='/home/simsci1/share/to-build-gcc_4.3.0/src-gcc-4.3.0/gcc-4.3.0/missing makeinfo'
NM='nm'
NM_FOR_BUILD='$(NM)'
NM_FOR_TARGET='$(NM)'
OBJCOPY='objcopy'
OBJDUMP='objdump'
OBJDUMP_FOR_TARGET='$(OBJDUMP)'
OBJEXT='o'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
RANLIB='ranlib'
RANLIB_FOR_BUILD='$(RANLIB)'
RANLIB_FOR_TARGET='$(RANLIB)'
RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
RPATH_ENVVAR='LD_LIBRARY_PATH'
RUNTEST='runtest'
SHELL='/bin/sh'
STRIP='strip'
STRIP_FOR_TARGET='$(STRIP)'
SYSROOT_CFLAGS_FOR_TARGET=''
TOPLEVEL_CONFIGURE_ARGUMENTS='../src-gcc-4.3.0/gcc-4.3.0/configure --prefix=/home/simsci1/share/gcc-4.3.0/ --with-gmp=/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec/ --with-mpfr=/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1/ --enable-version-specific-runtime-libs'
WINDMC='windmc'
WINDMC_FOR_BUILD='$(WINDMC)'
WINDMC_FOR_TARGET='$(WINDMC)'
WINDRES='windres'
WINDRES_FOR_BUILD='$(WINDRES)'
WINDRES_FOR_TARGET='$(WINDRES)'
YACC='/home/simsci1/share/to-build-gcc_4.3.0/src-gcc-4.3.0/gcc-4.3.0/missing bison -y'
ac_ct_CC='gcc'
ac_ct_CXX='g++'
ac_ct_GNATBIND='no'
ac_ct_GNATMAKE='no'
bindir='${exec_prefix}/bin'
build='i686-pc-linux-gnu'
build_alias=''
build_configargs='--cache-file=../config.cache '--prefix=/home/simsci1/share/gcc-4.3.0/' '--with-gmp=/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec/' '--with-mpfr=/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1/' '--enable-version-specific-runtime-libs' '--enable-languages=c,c++,fortran,java,objc' --program-transform-name='s,y,y,''
build_configdirs=' libiberty fixincludes'
build_cpu='i686'
build_libsubdir='build-i686-pc-linux-gnu'
build_noncanonical='i686-pc-linux-gnu'
build_os='linux-gnu'
build_subdir='build-i686-pc-linux-gnu'
build_tooldir='${exec_prefix}/i686-pc-linux-gnu'
build_vendor='pc'
config_shell='/bin/sh'
configdirs=' intl libiberty zlib libcpp libdecnumber fixincludes gcc'
datadir='${prefix}/share'
datarootdir='${prefix}/share'
do_compare='cmp --ignore-initial=16 $$f1 $$f2'
docdir='${datarootdir}/doc'
exec_prefix='${prefix}'
gmpinc='-I/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec//include -I/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1//include'
gmplibs='-L/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec//lib -L/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1//lib -lmpfr -lgmp'
host='i686-pc-linux-gnu'
host_alias=''
host_configargs='--cache-file=./config.cache '--prefix=/home/simsci1/share/gcc-4.3.0/' '--with-gmp=/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec/' '--with-mpfr=/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1/' '--enable-version-specific-runtime-libs' '--enable-languages=c,c++,fortran,java,objc' --program-transform-name='s,y,y,''
host_cpu='i686'
host_noncanonical='i686-pc-linux-gnu'
host_os='linux-gnu'
host_subdir='.'
host_vendor='pc'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${prefix}/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localstatedir='${prefix}/var'
mandir='${prefix}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/home/simsci1/share/gcc-4.3.0/'
program_transform_name='s,y,y,'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
stage1_cflags='-g -fkeep-inline-functions'
stage1_checking='--enable-checking=yes,types'
stage1_languages='c'
stage2_werror_flag=''
sysconfdir='${prefix}/etc'
target='i686-pc-linux-gnu'
target_alias=''
target_configargs='--cache-file=./config.cache --enable-multilib '--prefix=/home/simsci1/share/gcc-4.3.0/' '--with-gmp=/home/simsci1/share/to-build-gcc_4.3.0/gmp-4.2.2/install_exec/' '--with-mpfr=/home/simsci1/share/to-build-gcc_4.3.0/mpfr-2.3.1/' '--enable-version-specific-runtime-libs' '--enable-languages=c,c++,fortran,java,objc' --program-transform-name='s,y,y,''
target_cpu='i686'
target_noncanonical='i686-pc-linux-gnu'
target_os='linux-gnu'
target_subdir='i686-pc-linux-gnu'
target_vendor='pc'
tooldir='${exec_prefix}/i686-pc-linux-gnu'
## ------------- ##
## Output files. ##
## ------------- ##
alphaieee_frag='/dev/null'
host_makefile_frag='../src-gcc-4.3.0/gcc-4.3.0/config/mh-x86omitfp'
ospace_frag='/dev/null'
serialization_dependencies='serdep.tmp'
target_makefile_frag='../src-gcc-4.3.0/gcc-4.3.0/config/mt-gnu'
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_BUGREPORT ""
#define PACKAGE_NAME ""
#define PACKAGE_STRING ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#endif
#ifdef __cplusplus
extern "C" void std::exit (int) throw (); using std::exit;
configure: exit 0