This is the mail archive of the
gcc@gcc.gnu.org
mailing list for the GCC project.
egcs-1.0 successfully built on sparc-sun-solaris2.6
- To: egcs at cygnus dot com
- Subject: egcs-1.0 successfully built on sparc-sun-solaris2.6
- From: mulbrich at statistik dot tu-muenchen dot de (Michael Ulbrich)
- Date: Fri, 12 Dec 1997 15:49:23 +0100
- Reply-To: egcs at cygnus dot com
Hi,
I have built a native egcs-1.0 for the host sparc-sun-solaris2.6.
My system:
# uname -a
SunOS sunstatistik2 5.6 Generic sun4u sparc SUNW,Ultra-2
# ./config.guess
sparc-sun-solaris2.6
I configured with
# ../egcs-1.0/configure --enable-haifa --enable-threads
Three patches were necessary:
1. I had to use gmake, since /usr/ccs/bin/make did not work.
2. /usr/bin/which does not work on my system. I replaced
the corresponding line 795 in srcdir/configure.in
if [ "`/usr/bin/which $CCBASE`" = "/usr/ucb/cc" ] ; then
with
if [ "`echo "which $CCBASE; exit" | /usr/bin/csh`" = "/usr/ucb/cc" ] ; then
See the diff-file.
3. I had to use bash instead of /bin/sh in srcdir/configure.
See the diff-file.
Enclosed is my diff-file and the output of "cd objdir; make -k check".
Cheers,
Michael
*************
* diff file *
*************
diff -c egcs-1.0-org/configure egcs-1.0/configure
*** egcs-1.0-org/configure Wed Dec 3 17:34:28 1997
--- egcs-1.0/configure Fri Dec 12 15:14:04 1997
***************
*** 1,4 ****
! #!/bin/sh
### WARNING: this file contains embedded tabs. Do not run untabify on this file.
--- 1,4 ----
! #!/usr/applic/bin/bash
### WARNING: this file contains embedded tabs. Do not run untabify on this file.
***************
*** 117,123 ****
;;
esac
! config_shell=${CONFIG_SHELL-/bin/sh}
NO_EDIT="This file was generated automatically by configure. Do not edit."
--- 117,123 ----
;;
esac
! config_shell=${CONFIG_SHELL-/usr/applic/bin/bash}
NO_EDIT="This file was generated automatically by configure. Do not edit."
diff -c egcs-1.0-org/configure.in egcs-1.0/configure.in
*** egcs-1.0-org/configure.in Thu Nov 13 19:37:27 1997
--- egcs-1.0/configure.in Thu Dec 11 17:02:12 1997
***************
*** 792,798 ****
case "${host}" in
sparc-sun-solaris2*)
CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
! if [ "`/usr/bin/which $CCBASE`" = "/usr/ucb/cc" ] ; then
could_use=
[ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
if [ -d /opt/cygnus/bin ] ; then
--- 792,798 ----
case "${host}" in
sparc-sun-solaris2*)
CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
! if [ "`echo "which $CCBASE; exit" | /usr/bin/csh`" = "/usr/ucb/cc" ] ; then
could_use=
[ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
if [ -d /opt/cygnus/bin ] ; then
***************************
* output of make -k check *
***************************
# cd egcs-build
# make -k check
make[1]: Entering directory `/tmp/mulbrich/egcs-build/etc'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/etc'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/libiberty'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/libiberty'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/texinfo'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/texinfo'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/libiberty'
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libiberty'
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libiberty'
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/libiberty'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/texinfo'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/texinfo'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/gcc'
if [ -f libgcc2.ready ] ; then \
true; \
else \
touch libgcc2.ready; \
fi
if [ -f fixhdr.ready ] ; then \
true; \
else \
touch fixhdr.ready; \
fi
case "c proto gcov c++ f77 objc" in \
*f77*) top=`pwd`; \
cd f/runtime && make \
GCC_FOR_TARGET="`case '/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/' in \
'./xgcc -B./') echo ${top}/xgcc -B${top}/;; \
*) echo '/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/';; esac`" \
GCC_FLAGS="" CROSS="" AR_FLAGS="rc" AR="ar" BISON="bison" BISONFLAGS="" CC="gcc" CFLAGS="-g -O2" X_CFLAGS="-DSVR4" LDFLAGS="" LEX="flex" LEXFLAGS="" MAKEINFO="/tmp/mulbrich/egcs-build/texinfo/makeinfo/makeinfo " MAKEINFOFLAGS="" RANLIB="true" RANLIB_TEST="[ -f /usr/bin/ranlib -o -f /bin/ranlib ]" SHELL="/usr/applic/bin/bash" exec_prefix="/tmp/mulbrich/egcs" prefix="/tmp/mulbrich/egcs" tooldir="/tmp/mulbrich/egcs/sparc-sun-solaris2.6" bindir="/tmp/mulbrich/egcs/bin" libsubdir="/tmp/mulbrich/egcs/lib/gcc-lib/sparc-sun-solaris2.6/egcs-2.90.21" \
all ;; \
esac
make[2]: Entering directory `/tmp/mulbrich/egcs-build/gcc/f/runtime'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/gcc/f/runtime'
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/gcc'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libiberty'
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libiberty'
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libiberty'
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libiberty'
if [ -z "" ]; then \
true; \
else \
rootpre=`pwd`/; export rootpre; \
srcrootpre=`cd ../../../egcs-1.0/libiberty; pwd`/; export srcrootpre; \
lib=`echo ${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \
compiler="/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/"; \
for i in `${compiler} --print-multi-lib 2>/dev/null`; do \
dir=`echo $i | sed -e 's/;.*$//'`; \
if [ "${dir}" = "." ]; then \
true; \
else \
if [ -d ../${dir}/${lib} ]; then \
flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
if (cd ../${dir}/${lib}; make "AR=ar" "AR_FLAGS=rc" "CC=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CFLAGS=-g -O2" "LIBCFLAGS=-g -O2" "EXTRA_OFILES=" "HDEFINES=-DHAVE_SYSCONF" "INSTALL=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c" "INSTALL_DATA=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c -m 644" "INSTALL_PROGRAM=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c " "LDFLAGS=" "LOADLIBES=" "PICFLAG=" "RANLIB=true" "SHELL=/usr/applic/bin/bash" \
CFLAGS="-g -O2 ${flags}" \
CXXFLAGS="-g -O2 ${flags}" \
LIBCFLAGS="-g -O2 ${flags}" \
LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${flags}" \
all); then \
true; \
else \
exit 1; \
fi; \
else true; \
fi; \
fi; \
done; \
fi
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libiberty'
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libiberty'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio'
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio'
if [ -z "" ]; then \
true; \
else \
rootpre=`pwd`/; export rootpre; \
srcrootpre=`cd ../../../egcs-1.0/libio; pwd`/; export srcrootpre; \
lib=`echo ${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \
compiler="/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/"; \
for i in `${compiler} --print-multi-lib 2>/dev/null`; do \
dir=`echo $i | sed -e 's/;.*$//'`; \
if [ "${dir}" = "." ]; then \
true; \
else \
if [ -d ../${dir}/${lib} ]; then \
flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
if (cd ../${dir}/${lib}; make "INSTALL=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c" "INSTALL_DATA=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c -m 644" "INSTALL_PROGRAM=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c " "prefix=/tmp/mulbrich/egcs" "exec_prefix=/tmp/mulbrich/egcs" "tooldir=/tmp/mulbrich/egcs/sparc-sun-solaris2.6" "AR=ar" "AR_FLAGS=rc" "CC=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CXX=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-g -O2" "NM=nm" "RANLIB=true" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-g -O2 -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/tmp/mulbrich/egcs-build/texinfo/makeinfo/makeinfo " "SHLIB=" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" \
CFLAGS="-g -O2 ${flags}" \
CXXFLAGS="-g -O2 ${flags}" \
LIBCFLAGS="-g -O2 ${flags}" \
LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${flags}" \
all); then \
true; \
else \
exit 1; \
fi; \
else true; \
fi; \
fi; \
done; \
fi
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio'
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio'
cd tests; make all ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio/tests'
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio/tests'
cd dbz; make all ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio/dbz'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio/dbz'
cd stdio; make all ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio/stdio'
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio/stdio'
cd testsuite; make all ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio/testsuite'
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio/testsuite'
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio'
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libstdc++'
cd ../libio ; make "INSTALL=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c" "INSTALL_DATA=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c -m 644" "INSTALL_PROGRAM=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c " "prefix=/tmp/mulbrich/egcs" "exec_prefix=/tmp/mulbrich/egcs" "tooldir=/tmp/mulbrich/egcs/sparc-sun-solaris2.6" "AR=ar" "AR_FLAGS=rc" "CC=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CXX=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-g -O2" "NM=nm" "RANLIB=true" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-g -O2 -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/tmp/mulbrich/egcs-build/texinfo/makeinfo/makeinfo " "SHLIB=libstdc++.so.2.8.0" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" iostream.list
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio'
make[2]: `iostream.list' is up to date.
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio'
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libstdc++'
if [ -z "" ]; then \
true; \
else \
rootpre=`pwd`/; export rootpre; \
srcrootpre=`cd ../../../egcs-1.0/libstdc++; pwd`/; export srcrootpre; \
lib=`echo ${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \
compiler="/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/"; \
for i in `${compiler} --print-multi-lib 2>/dev/null`; do \
dir=`echo $i | sed -e 's/;.*$//'`; \
if [ "${dir}" = "." ]; then \
true; \
else \
if [ -d ../${dir}/${lib} ]; then \
flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
if (cd ../${dir}/${lib}; make "INSTALL=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c" "INSTALL_DATA=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c -m 644" "INSTALL_PROGRAM=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c " "prefix=/tmp/mulbrich/egcs" "exec_prefix=/tmp/mulbrich/egcs" "tooldir=/tmp/mulbrich/egcs/sparc-sun-solaris2.6" "AR=ar" "AR_FLAGS=rc" "CC=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CXX=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-g -O2" "NM=nm" "RANLIB=true" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-g -O2 -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/tmp/mulbrich/egcs-build/texinfo/makeinfo/makeinfo " "SHLIB=libstdc++.so.2.8.0" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" \
CFLAGS="-g -O2 ${flags}" \
CXXFLAGS="-g -O2 ${flags}" \
LIBCFLAGS="-g -O2 ${flags}" \
LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${flags}" \
all); then \
true; \
else \
exit 1; \
fi; \
else true; \
fi; \
fi; \
done; \
fi
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libstdc++'
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libstdc++'
cd tests; make all ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libstdc++/tests'
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libstdc++/tests'
cd testsuite; make all ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libstdc++/testsuite'
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libstdc++/testsuite'
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libstdc++'
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libstdc++'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio'
rootme=`pwd`/; export rootme; \
SAVE_LLPATH="${SAVE_LLPATH-$LD_LIBRARY_PATH}"; export SAVE_LLPATH; \
LD_LIBRARY_PATH="${rootme}../libstdc++:${rootme}../libg++:$SAVE_LLPATH"; \
export LD_LIBRARY_PATH; \
make "DODIRS=tests dbz stdio testsuite" DO=check "INSTALL=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c" "INSTALL_DATA=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c -m 644" "INSTALL_PROGRAM=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c " "prefix=/tmp/mulbrich/egcs" "exec_prefix=/tmp/mulbrich/egcs" "tooldir=/tmp/mulbrich/egcs/sparc-sun-solaris2.6" "AR=ar" "AR_FLAGS=rc" "CC=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CXX=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-g -O2" "NM=nm" "RANLIB=true" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-g -O2 -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/tmp/mulbrich/egcs-build/texinfo/makeinfo/makeinfo " "SHLIB=" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" subdir_do
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio'
cd tests; make check ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio/tests'
make[3]: Nothing to be done for `check'.
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio/tests'
cd dbz; make check ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio/dbz'
/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/ -g -O2 -I../../../../egcs-1.0/libio/dbz -I.. -I../../../../egcs-1.0/libio/dbz/.. -DDBZ_FINISH='_IO_flush_all()' -c ../../../../egcs-1.0/libio/dbz/byteflip.c
/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/ byteflip.o ../libio.a ../../libiberty/libiberty.a -o byteflip
/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/ -g -O2 -I../../../../egcs-1.0/libio/dbz -I.. -I../../../../egcs-1.0/libio/dbz/.. -DDBZ_FINISH='_IO_flush_all()' -DHAVERFCIZE -c rdbzmain.c
/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/ -g -O2 -I../../../../egcs-1.0/libio/dbz -I.. -I../../../../egcs-1.0/libio/dbz/.. -DDBZ_FINISH='_IO_flush_all()' -DDBZDEBUG -DDEFSIZE=4019 -c rdbz.c
/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/ rdbzmain.o rdbz.o case.o ../libio.a ../../libiberty/libiberty.a -o rdbz
/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/ -g -O2 -I../../../../egcs-1.0/libio/dbz -I.. -I../../../../egcs-1.0/libio/dbz/.. -DDBZ_FINISH='_IO_flush_all()' -c ../../../../egcs-1.0/libio/dbz/fake.c
/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/ -g -O2 -I../../../../egcs-1.0/libio/dbz -I.. -I../../../../egcs-1.0/libio/dbz/.. -DDBZ_FINISH='_IO_flush_all()' -c ../../../../egcs-1.0/libio/dbz/random.c
/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/ fake.o random.o ../libio.a ../../libiberty/libiberty.a -o fake
./fake -t -e 75 3300 >hist3.3
./fake -t -e 75 10000 >hist10
: 'WARNING: creates about 2MB of debris; do "make rclean" afterward'
rm -f dbase dbase[23] dbase.* dbase[23].*
test ! -d xx || rmdir xx
: crude check of synthetic history file
( sed 25q hist3.3 ; tail -25 hist3.3 ) >histjunk
cmp histjunk ../../../../egcs-1.0/libio/dbz/firstlast25
rm histjunk
: basic tests, exercising as many options as possible
cp hist3.3 dbase
mkdir xx
chmod -w xx
./rdbz -E 1000 -0 -M -i -S -u -U -C xx dbase
1000
2000
3000
rmdir xx
sed '/> 0/d' hist3.3 >dbase.used
test "`cat dbase.used | wc -l`" -eq "`sed -n '2s/ .*//p' dbase.dir`" ;
cp hist3.3 dbase2
./rdbz -E 1000 -0 -p 2679 -t ' ' dbase2
1000
2000
3000
cmp hist3.3 dbase
cmp dbase dbase2
cmp dbase.dir dbase2.dir
cmp dbase.pag dbase2.pag
./rdbz -E 1000 -0 -c dbase
1000
2000
3000
./rdbz -E 1000 -0 -c -i -q -M -U dbase
1000
2000
3000
: build a database and then add to it
sed 1000q hist3.3 >dbase2
sed 1,1000d hist3.3 >dbase2.add
./rdbz -E 1000 -0 dbase2
1000
./rdbz -E 1000 -0 -a dbase2 dbase2.add
1000
2000
cmp dbase dbase2
cmp dbase.dir dbase2.dir
cmp dbase.pag dbase2.pag
: build based on existing one, test extraction and readonly files
./rdbz -E 1000 -0 -f dbase dbase2
1000
2000
3000
test "`cat dbase.used | wc -l`" -eq "`awk 'NR==2{print $1}' dbase2.dir`" ;
test "`cat dbase.used | wc -l`" -eq "`awk 'NR==2{print $2}' dbase2.dir`" ;
chmod -w dbase2.dir dbase2.pag
./rdbz -E 1000 -x dbase2 dbase >dbase.temp
1000
2000
3000
cmp dbase.used dbase.temp
: try some small case perversions
sed 's/\(@[^ ]*\)A/\1a/' dbase >dbase.ick
./rdbz -E 1000 -x dbase2 dbase.ick >dbase.temp
1000
2000
3000
cmp dbase.used dbase.temp
sed -n 's/A\([^ ]*@\)/a\1/p' dbase >dbase.ick
./rdbz -x dbase2 dbase.ick >dbase.temp
test ! -s dbase.temp ;
rm -f dbase2.dir dbase2.pag
: try it without tags, case-insensitive, with case perversions
./rdbz -E 1000 -0 -p '0 b 1' dbase2
1000
2000
3000
tr '[A-M][n-z]' '[a-m][N-Z]' <dbase2 >dbase.ick
./rdbz -E 1000 -x dbase2 dbase.ick >dbase.temp
1000
2000
3000
cmp dbase.used dbase.temp
rm -f dbase.temp dbase.ick
: test various perversions of byte ordering
awk -f ../../../../egcs-1.0/libio/dbz/revbytes dbase.dir >dbase2.dir
./byteflip `../../../../egcs-1.0/libio/dbz/getmap dbase.dir` `../../../../egcs-1.0/libio/dbz/getmap dbase2.dir` <dbase.pag >dbase2.pag
cp dbase dbase2
./rdbz -E 1000 -0 -c dbase2
1000
2000
3000
awk -f ../../../../egcs-1.0/libio/dbz/altbytes dbase.dir >dbase2.dir
dd conv=swab <dbase.pag >dbase2.pag
31+1 records in
31+1 records out
./rdbz -E 1000 -0 -c dbase2
1000
2000
3000
cp dbase2 dbase3
./rdbz -E 1000 -0 -f dbase2 dbase3
1000
2000
3000
./rdbz -E 1000 -0 -c dbase3
1000
2000
3000
test " `../../../../egcs-1.0/libio/dbz/getmap dbase2.dir`" = " `../../../../egcs-1.0/libio/dbz/getmap dbase3.dir`" ;
: test massive overflow, throw in case sensitivity and tag mask
cp hist10 dbase
./rdbz -E 1000 -0 -p '0 0 7ffc0000' dbase
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
./rdbz -E 1000 -0 -cq dbase
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
sed 100q dbase | egrep '[aA].* ' | tr aA Aa >dbase.ick
./rdbz -x dbase dbase.ick >dbase.temp
test ! -s dbase.temp ;
: success!
make rclean
make[4]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio/dbz'
rm -f dbase dbase[23] dbase.* dbase[23].* fake fake.o random.o
rm -f rdbz rdbz.o rdbzmain.o hist3.3 hist10 byteflip byteflip.o
rm -f histjunk core stamp-r? *~
test ! -d xx || rmdir xx
make[4]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio/dbz'
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio/dbz'
cd stdio; make check ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio/stdio'
make[3]: Nothing to be done for `check'.
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio/stdio'
cd testsuite; make check ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio/testsuite'
rootme=`pwd`; export rootme; \
srcdir=../../../../egcs-1.0/libio/testsuite ; export srcdir ; \
EXPECT=`if [ -f ${rootme}/../../expect/expect ] ; then echo ${rootme}/../../expect/expect ; else echo expect ; fi` ; export EXPECT ; \
if [ -f ${rootme}/../../expect/expect ] ; then \
TCL_LIBRARY=${srcdir}/../../tcl/library ; \
export TCL_LIBRARY ; fi ; \
` if [ -f ${srcdir}/../../dejagnu/runtest ]; then echo ${srcdir}/../../dejagnu/runtest; else if [ "sparc-sun-solaris2.6" = "sparc-sun-solaris2.6" ]; then echo runtest; else t=''; echo runtest | sed -e '' $t; fi; fi`
WARNING: Couldn't find the global config file.
Test Run By mulbrich on Fri Dec 12 14:17:40 1997
Native configuration is sparc-sun-solaris2.6
=== libio tests ===
Running target unix
Using /tmp/mulbrich/dejagnu/bin/../share/dejagnu/baseboards/unix.exp as board description file for target.
Using /tmp/mulbrich/dejagnu/bin/../share/dejagnu/config/unix.exp as generic interface file for target.
Using ../../../../egcs-1.0/libio/testsuite/config/default.exp as tool-and-target-specific interface file.
Running ../../../../egcs-1.0/libio/testsuite/libio.tests/hounddog.exp ...
Running ../../../../egcs-1.0/libio/testsuite/libio.tests/putbackdog.exp ...
Running ../../../../egcs-1.0/libio/testsuite/libio.tests/tFile.exp ...
Running ../../../../egcs-1.0/libio/testsuite/libio.tests/tfformat.exp ...
Running ../../../../egcs-1.0/libio/testsuite/libio.tests/tiformat.exp ...
Running ../../../../egcs-1.0/libio/testsuite/libio.tests/tiomanip.exp ...
Running ../../../../egcs-1.0/libio/testsuite/libio.tests/tiomisc.exp ...
Running ../../../../egcs-1.0/libio/testsuite/libio.tests/tstdiomisc.exp ...
=== libio Summary ===
# of expected passes 40
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio/testsuite'
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio'
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libstdc++'
cd ../libio ; make "INSTALL=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c" "INSTALL_DATA=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c -m 644" "INSTALL_PROGRAM=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c " "prefix=/tmp/mulbrich/egcs" "exec_prefix=/tmp/mulbrich/egcs" "tooldir=/tmp/mulbrich/egcs/sparc-sun-solaris2.6" "AR=ar" "AR_FLAGS=rc" "CC=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CXX=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-g -O2" "NM=nm" "RANLIB=true" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-g -O2 -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/tmp/mulbrich/egcs-build/texinfo/makeinfo/makeinfo " "SHLIB=libstdc++.so.2.8.0" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" iostream.list
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libio'
make[2]: `iostream.list' is up to date.
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libio'
rootme=`pwd`/; export rootme; \
SAVE_LLPATH="${SAVE_LLPATH-$LD_LIBRARY_PATH}"; export SAVE_LLPATH; \
LD_LIBRARY_PATH="${rootme}../libstdc++:${rootme}../libg++:$SAVE_LLPATH"; \
export LD_LIBRARY_PATH; \
make "DODIRS=tests testsuite" DO=check "INSTALL=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c" "INSTALL_DATA=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c -m 644" "INSTALL_PROGRAM=/usr/applic/bin/bash /tmp/mulbrich/egcs-1.0/install-sh -c " "prefix=/tmp/mulbrich/egcs" "exec_prefix=/tmp/mulbrich/egcs" "tooldir=/tmp/mulbrich/egcs/sparc-sun-solaris2.6" "AR=ar" "AR_FLAGS=rc" "CC=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CXX=/tmp/mulbrich/egcs-build/gcc/xgcc -B/tmp/mulbrich/egcs-build/gcc/" "CFLAGS=-g -O2" "CXXFLAGS=-g -O2" "NM=nm" "RANLIB=true" "LIBCFLAGS=-g -O2" "LIBCXXFLAGS=-g -O2 -fno-implicit-templates" "LOADLIBES=" "LDFLAGS=" "MAKEINFO=/tmp/mulbrich/egcs-build/texinfo/makeinfo/makeinfo " "SHLIB=libstdc++.so.2.8.0" "SHCURSES=" "PICFLAG=" "RUNTESTFLAGS=" subdir_do
make[2]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libstdc++'
cd tests; make check ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libstdc++/tests'
make[3]: Nothing to be done for `check'.
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libstdc++/tests'
cd testsuite; make check ...
make[3]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libstdc++/testsuite'
rootme=`pwd`; export rootme; \
srcdir=../../../../egcs-1.0/libstdc++/testsuite ; export srcdir ; \
EXPECT=`if [ -f ${rootme}/../../expect/expect ] ; then echo ${rootme}/../../expect/expect ; else echo expect ; fi` ; export EXPECT ; \
if [ -f ${rootme}/../../expect/expect ] ; then \
TCL_LIBRARY=${srcdir}/../../tcl/library ; \
export TCL_LIBRARY ; fi ; \
`if [ -f ${srcdir}/../../dejagnu/runtest ] ; then echo ${srcdir}/../../dejagnu/runtest ; else echo runtest; fi`
WARNING: Couldn't find the global config file.
Test Run By mulbrich on Fri Dec 12 14:18:27 1997
Native configuration is sparc-sun-solaris2.6
=== libstdc++ tests ===
Running target unix
Using /tmp/mulbrich/dejagnu/bin/../share/dejagnu/baseboards/unix.exp as board description file for target.
Using /tmp/mulbrich/dejagnu/bin/../share/dejagnu/config/unix.exp as generic interface file for target.
Using ../../../../egcs-1.0/libstdc++/testsuite/config/default.exp as tool-and-target-specific interface file.
Running ../../../../egcs-1.0/libstdc++/testsuite/libstdc++.tests/test.exp ...
=== libstdc++ Summary ===
# of expected passes 30
make[3]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libstdc++/testsuite'
make[2]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libstdc++'
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libstdc++'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/libraries/libiberty'
make[1]: Nothing to be done for `check'.
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/libraries/libiberty'
make[1]: Entering directory `/tmp/mulbrich/egcs-build/gcc'
rootme=`pwd`; export rootme; \
srcdir=`cd ../../egcs-1.0/gcc; pwd` ; export srcdir ; \
cd testsuite; \
EXPECT=expect ; export EXPECT ; \
if [ -f ${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=${srcdir}/../tcl/library ; \
export TCL_LIBRARY ; fi ; \
runtest --tool gcc
WARNING: Couldn't find the global config file.
Test Run By mulbrich on Fri Dec 12 14:19:09 1997
Native configuration is sparc-sun-solaris2.6
=== gcc tests ===
Running target unix
Using /tmp/mulbrich/dejagnu/bin/../share/dejagnu/baseboards/unix.exp as board description file for target.
Using /tmp/mulbrich/dejagnu/bin/../share/dejagnu/config/unix.exp as generic interface file for target.
Using /tmp/mulbrich/egcs-1.0/gcc/testsuite/config/default.exp as tool-and-target-specific interface file.
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.c-torture/code_quality/code_quality.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.c-torture/compile/compile.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.c-torture/execute/execute.exp ...
FAIL: gcc.c-torture/execute/loop-2f.c execution, -O2
FAIL: gcc.c-torture/execute/loop-2f.c execution, -O2 -fomit-frame-pointer -finline-functions
FAIL: gcc.c-torture/execute/loop-2f.c execution, -O2 -fomit-frame-pointer -finline-functions -funroll-loops
FAIL: gcc.c-torture/execute/loop-2f.c execution, -O2 -fomit-frame-pointer -finline-functions -funroll-all-loops
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.c-torture/execute/ieee/ieee.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.c-torture/noncompile/noncompile.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.c-torture/special/special.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.c-torture/unsorted/unsorted.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.dg/dg.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.failure/failure.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.misc-tests/acker1.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.misc-tests/dg-test.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.misc-tests/dhry.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.misc-tests/gcov.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.misc-tests/matrix1.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.misc-tests/mg.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.misc-tests/msgs.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.misc-tests/optbench.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.misc-tests/sieve.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/gcc.misc-tests/sort2.exp ...
=== gcc Summary ===
# of expected passes 4881
# of unexpected failures 4
# of expected failures 5
# of unsupported tests 6
/tmp/mulbrich/egcs-build/gcc/xgcc version egcs-2.90.21 971202 (egcs-1.00 release)
make[1]: [check-gcc] Error 1 (ignored)
rootme=`pwd`; export rootme; \
srcdir=`cd ../../egcs-1.0/gcc; pwd` ; export srcdir ; \
cd testsuite; \
EXPECT=expect ; export EXPECT ; \
if [ -f ${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=${srcdir}/../tcl/library ; \
export TCL_LIBRARY ; fi ; \
runtest --tool g++
WARNING: Couldn't find the global config file.
Test Run By mulbrich on Fri Dec 12 14:45:59 1997
Native configuration is sparc-sun-solaris2.6
=== g++ tests ===
Running target unix
Using /tmp/mulbrich/dejagnu/bin/../share/dejagnu/baseboards/unix.exp as board description file for target.
Using /tmp/mulbrich/dejagnu/bin/../share/dejagnu/config/unix.exp as generic interface file for target.
Using /tmp/mulbrich/egcs-1.0/gcc/testsuite/config/default.exp as tool-and-target-specific interface file.
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/g++.old-deja/old-deja.exp ...
XPASS: g++.jason/destruct3.C - (test for bogus messages, line 38)
XPASS: g++.mike/dyncast1.C Execution test
XPASS: g++.mike/dyncast2.C Execution test
=== g++ Summary ===
# of expected passes 3400
# of unexpected successes 3
# of expected failures 80
# of untested testcases 6
/tmp/mulbrich/egcs-build/gcc/testsuite/../xgcc version egcs-2.90.21 971202 (egcs-1.00 release)
make[1]: [check-g++] Error 1 (ignored)
rootme=`pwd`; export rootme; \
srcdir=`cd ../../egcs-1.0/gcc; pwd` ; export srcdir ; \
cd testsuite; \
EXPECT=expect ; export EXPECT ; \
if [ -f ${rootme}/../expect/expect ] ; then \
TCL_LIBRARY=${srcdir}/../tcl/library ; \
export TCL_LIBRARY ; fi ; \
runtest --tool g77
WARNING: Couldn't find the global config file.
Test Run By mulbrich on Fri Dec 12 15:01:52 1997
Native configuration is sparc-sun-solaris2.6
=== g77 tests ===
Running target unix
Using /tmp/mulbrich/dejagnu/bin/../share/dejagnu/baseboards/unix.exp as board description file for target.
Using /tmp/mulbrich/dejagnu/bin/../share/dejagnu/config/unix.exp as generic interface file for target.
Using /tmp/mulbrich/egcs-1.0/gcc/testsuite/config/default.exp as tool-and-target-specific interface file.
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/g77.f-torture/compile/compile.exp ...
Running /tmp/mulbrich/egcs-1.0/gcc/testsuite/g77.f-torture/execute/execute.exp ...
=== g77 Summary ===
# of expected passes 132
/tmp/mulbrich/egcs-build/gcc/g77 version egcs-2.90.21 971202 (egcs-1.00 release)
make[1]: Leaving directory `/tmp/mulbrich/egcs-build/gcc'