This is the mail archive of the
gcc-regression@gcc.gnu.org
mailing list for the GCC project.
new FAILs on HEAD
- From: Michael Ritzert <gcc at ds217-115-141-84 dot dedicated dot hosteurope dot de>
- To: gcc-regression at gcc dot gnu dot org, bonzini at gnu dot org, ebotcazou at libertysurf dot fr, ian at wasabisystems dot com, mark at codesourcery dot com, nathan at codesourcery dot com, nico at cam dot org, paul at codesourcery dot com, phil at codesourcery dot com, rearnsha at arm dot com, scw at wasabisystems dot com
- Date: Tue, 3 Feb 2004 23:55:01 +0100
- Subject: new FAILs on HEAD
- Reply-to: gcc-regression at gcc dot gnu dot org
If you directly receive this mail, your name is tagged to one of the ChangeLog
entries. A copy is also mailed to gcc-regressions.
The build system:
debian GNU/Linux i686 unstable
i686-pc-linux-gnu
configure flags: --enable-threads=posix --prefix=/opt/gcc-HEAD --enable-__cxa_atexit --with-system-zlib
These new FAILs appeared since the last run:
FAIL: gcc.dg/noncompile/20001228-1.c (test for errors, line 4)
FAIL: gcc.dg/noncompile/20001228-1.c (test for excess errors)
FAIL: gcc.dg/noncompile/20001228-1.c (test for errors, line 4)
FAIL: gcc.dg/noncompile/20001228-1.c (test for excess errors)
FAIL: gcc.dg/noncompile/20001228-1.c (test for errors, line 4)
FAIL: gcc.dg/noncompile/20001228-1.c (test for excess errors)
FAIL: gcc.dg/noncompile/20001228-1.c (test for errors, line 4)
FAIL: gcc.dg/noncompile/20001228-1.c (test for excess errors)
FAIL: gcc.dg/noncompile/20001228-1.c (test for errors, line 4)
FAIL: gcc.dg/noncompile/20001228-1.c (test for excess errors)
FAIL: gcc.dg/noncompile/20001228-1.c (test for errors, line 4)
FAIL: gcc.dg/noncompile/20001228-1.c (test for excess errors)
FAIL: gcc.dg/noncompile/20001228-1.c (test for errors, line 4)
FAIL: gcc.dg/noncompile/20001228-1.c (test for excess errors)
FAIL: gcc.dg/noncompile/20001228-1.c (test for errors, line 4)
FAIL: gcc.dg/noncompile/20001228-1.c (test for excess errors)
The complete testsuite logs can be found at
http://gcctests.port5.com/logs-HEAD-i686-1075823853.tar.bz2
These are the new ChangeLog entries since the last run:
2004-02-02 Paul Brook <paul@codesourcery.com>
Merge from csl-arm-branch.
2004-01-30 Paul Brook <paul@codesourcery.com>
* aof.h (REGISTER_NAMES): Add vfp reg names
(ADDITIONAL_REGISTER_NAMES): Ditto.
* aout.h (REGISTER_NAMES): Ditto.
(ADDITIONAL_REGISTER_NAMES): Ditto.
* arm-protos.h: Update/Add Prototypes.
* arm.c (init_fp_table): Rename from init_fpa_table. Update users.
Only allow 0.0 for VFP.
(fp_consts_inited): Rename from fpa_consts_inited. Update users.
(values_fp): Rename from values_fpa. Update Users.
(arm_const_double_rtx): Rename from const_double_rtx_ok_for_fpa.
Update users. Only check valid constants for this hardware.
(arm_float_rhs_operand): Rename from fpa_rhs_operand. Update Users.
Only allow consts for FPA.
(arm_float_add_operand): Rename from fpa_add_operand. Update users.
Only allow consts for FPA.
(use_return_insn): Check for saved VFP regs.
(arm_legitimate_address_p): Handle VFP DFmode addressing.
(arm_legitimize_address): Ditto.
(arm_general_register_operand): New function.
(vfp_mem_operand): New function.
(vfp_compare_operand): New function.
(vfp_secondary_reload_class): New function.
(arm_float_compare_operand): New function.
(vfp_print_multi): New function.
(vfp_output_fstmx): New function.
(vfp_emit_fstm): New function.
(arm_output_epilogue): Output VPF reg restore code.
(arm_expand_prologue): Output VFP reg save code.
(arm_print_operand): Add 'P'.
(arm_hard_regno_mode_ok): Return modes for VFP regs.
(arm_regno_class): Return classes for VFP regs.
(arm_compute_initial_elimination_offset): Include space for VFP regs.
(arm_get_frame_size): Ditto.
* arm.h (FIXED_REGISTERS): Add VFP regs.
(CALL_USED_REGISTERS): Ditto.
(CONDITIONAL_REGISTER_USAGE): Enable VFP regs.
(FIRST_VFP_REGNUM): Define.
(LAST_VFP_REGNUM): Define.
(IS_VFP_REGNUM): Define.
(FIRST_PSEUDO_REGISTER): Include VFP regs.
(HARD_REGNO_NREGS): Handle VFP regs.
(REG_ALLOC_ORDER): Add VFP regs.
(enum reg_class): Add VFP_REGS.
(REG_CLASS_NAMES): Ditto.
(REG_CLASS_CONTENTS): Ditto.
(CANNOT_CHANGE_MODE_CLASS) Handle VFP Regs.
(REG_CLASS_FROM_LETTER): Add 'w'.
(EXTRA_CONSTRAINT_ARM): Add 'U'.
(EXTRA_MEMORY_CONSTRAINT): Define.
(SECONDARY_OUTPUT_RELOAD_CLASS): Handle VFP regs.
(SECONDARY_INPUT_RELOAD_CLASS): Ditto.
(REGISTER_MOVE_COST): Ditto.
(PREDICATE_CODES): Add arm_general_register_operand,
arm_float_compare_operand and vfp_compare_operand.
* arm.md (various): Rename as above.
(divsf3): Enable when TARGET_VFP.
(divdf3): Ditto.
(movdfcc): Ditto.
(sqrtsf2): Ditto.
(sqrtdf2): Ditto.
(arm_movdi): Disable when TARGET_VFP.
(arm_movsi_insn): Ditto.
(movsi): Only split with general regs.
(cmpsf): Use arm_float_compare_operand.
(push_fp_multi): Restrict to TARGET_FPA.
(vfp.md): Include.
* vfp.md: New file.
* fpa.md (various): Rename as above.
* doc/md.texi: Document ARM w and U constraints.
2004-01-15 Paul Brook <paul@codesourcery.com>
* config.gcc: Add with_fpu. Allow with-float=softfp.
* config/arm/arm.c (arm_override_options): Rename *-s to *s.
Break out of loop when we find a float-abi. Fix typo.
* config/arm/arm.h (OPTION_DEFAULT_SPECS): Add "fpu".
Set -mfloat-abi=.
* doc/install.texi: Document --with-fpu.
2003-01-14 Paul Brook <paul@codesourcery.com>
* config.gcc (with_arch): Add armv6.
* config/arm/arm.h: Rename TARGET_CPU_*_s to TARGET_CPU_*s.
* config/arm/arm.c (arm_overrride_options): Ditto.
2004-01-08 Richard Earnshaw <rearnsha@arm.com>
* arm.c (FL_ARCH3M): Renamed from FL_FAST_MULT.
(FL_ARCH6): Renamed from FL_ARCH6J.
(arm_arch3m): Renamed from arm_fast_multiply.
(arm_arch6): Renamed from arm_arch6j.
* arm.h: Update all uses of above.
* arm-cores.def: Likewise.
* arm.md: Likewise.
* arm.h (CPP_CPU_ARCH_SPEC): Emit __ARM_ARCH_6J__ define for armV6j,
not arm6j. Add entry for arch armv6.
2004-01-07 Richard Earnshaw <rearnsha@arm.com>
* arm.c (arm_emit_extendsi): Delete.
* arm-protos.h (arm_emit_extendsi): Delete.
* arm.md (zero_extendhisi2): Also handle zero-extension of
non-subregs.
(zero_extendqisi2, extendhisi2, extendqisi2): Likewise.
(thumb_zero_extendhisi2): Only match if not v6.
(arm_zero_extendhisi2, thumb_zero_extendqisi2, arm_zero_extendqisi2)
(thumb_extendhisi2, arm_extendhisi2, arm_extendqisi)
(thumb_extendqisi2): Likewise.
(thumb_zero_extendhisi2_v6, arm_zero_extendhisi2_v6): New patterns.
(thumb_zero_extendqisi2_v6, arm_zero_extendqisi2_v6): New patterns.
(thumb_extendhisi2_insn_v6, arm_extendhisi2_v6): New patterns.
(thumb_extendqisi2_v6, arm_extendqisi_v6): New patterns.
(arm_zero_extendhisi2_reg, arm_zero_extendqisi2_reg): Delete.
(arm_extendhisi2_reg, arm_extendqisi2_reg): Delete.
(arm_zero_extendhisi2addsi): Remove subreg. Add attributes.
(arm_zero_extendqisi2addsi, arm_extendhisi2addsi): Likewise.
(arm_extendqisi2addsi): Likewise.
2003-12-31 Mark Mitchell <mark@codesourcery.com>
Revert this change:
* config/arm/arm.h (THUMB_LEGTITIMIZE_RELOAD_ADDRESS): Reload REG
+ REG addressing modes.
* config/arm/arm.h (THUMB_LEGTITIMIZE_RELOAD_ADDRESS): Reload REG
+ REG addressing modes.
2003-12-30 Mark Mitchell <mark@codesourcery.com>
* config/arm/arm.h (THUMB_LEGITIMATE_CONSTANT_P): Accept
CONSTANT_P_RTX.
2003-30-12 Paul Brook <paul@codesourcery.com>
* longlong.h: protect arm inlines with !defined (__thumb__)
2003-30-12 Paul Brook <paul@codesourcery.com>
* config/arm/arm.h (TARGET_CPU_CPP_BUILTINS): Always define __arm__.
2003-12-30 Nathan Sidwell <nathan@codesourcery.com>
* builtins.c (expand_builtin_apply_args_1): Fix typo in previous
change.
2003-12-29 Nathan Sidwell <nathan@codesourcery.com>
* builtins.c (expand_builtin_apply_args_1): Add pretend args size
to the virtual incoming args pointer for downward stacks.
2003-12-29 Paul Brook <paul@codesourcery.com>
* config/arm/arm-cores.def: Add cost function.
* config/arm/arm.c (arm_*_rtx_costs): New functions.
(arm_rtx_costs): Remove
(struct processors): Add rtx_costs field.
(all_cores, all_architectures): Ditto.
(arm_override_options): Set targetm.rtx_costs.
(thumb_rtx_costs): New function.
(arm_rtx_costs_1): Remove cases handled elsewhere.
* config/arm/arm.h (processor_type): Add COSTS parameter.
2003-12-29 Nathan Sidwell <nathan@codesourcery.com>
* config/arm/arm.md (generic_sched): arm926 has its own scheduler.
(arm926ejs.md): Include it.
* config/arm/arm926ejs.md: New pipeline description.
2003-12-24 Paul Brook <paul@codesourcery.com>
* config/arm/arm.c (arm_arch6j): New variable.
(arm_override_options): Set it.
(arm_emit_extendsi): New function.
* config/arm/arm-protos.h (arm_emit_extendsi): Add prototype.
* config/arm/arm.h (arm_arch6j): Declare.
* config/arm/arm.md: Add sign/zero extend insns.
2003-12-23 Paul Brook <paul@codesourcery.com>
* config/arm/arm.c (all_architectures): Add armv6.
* doc/invoke.texi: Document it.
2003-12-19 Paul Brook <paul@codesourcery.com>
* config/arm/arm.md: Add load1 and load_byte "type" attrs. Modify
insn patterns to match.
* config/arm/arm-generic.md: Ditto.
* config/arm/cirrus.md: Ditto.
* config/arm/fpa.md: Ditto.
* config/amm/iwmmxt.md: Ditto.
* config/arm/arm1026ejs.md: Ditto.
* config/arm/arm1135jfs.md: Ditto. Add insn_reservation and bypasses
for 11_loadb.
2003-12-18 Nathan Sidwell <nathan@codesourcery.com>
* config/arm/arm-protos.h (arm_no_early_alu_shift_value_dep): Declare.
* config/arm/arm.c (arm_adjust_cost): Check shift cost for
TYPE_ALU_SHIFT and TYPE_ALU_SHIFT_REG.
(arm_no_early_store_addr_dep, arm_no_early_alu_shift_dep,
arm_no_early_mul_dep): Correctly deal with conditional execution,
parallels and single shift operations.
(arm_no_early_alu_shift_value_dep): Define.
* arm.md (attr type): Replace 'normal' with 'alu',
'alu_shift' and 'alu_shift_reg'.
(attr core_cycles): Adjust.
(*addsi3_carryin_shift, andsi_not_shiftsi_si, *arm_shiftsi3,
*shiftsi3_compare0, *notsi_shiftsi, *notsi_shiftsi_compare0,
*not_shiftsi_compare0_scratch, *cmpsi_shiftsi, *cmpsi_shiftsi_swp,
*cmpsi_neg_shiftsi, *arith_shiftsi, *arith_shiftsi_compare0,
*arith_shiftsi_compare0_scratch, *sub_shiftsi,
*sub_shiftsi_compare0, *sub_shiftsi_compare0_scratch,
*if_shift_move, *if_move_shift, *if_shift_shift): Set type
attribute appropriately.
* config/arm/arm1026ejs.md (alu_op): Adjust.
(alu_shift_op, alu_shift_reg_op): New.
* config/arm/arm1136.md: Add better bypasses for early
registers. Remove load[234] and store[234] bypasses.
(11_alu_op): Adjust.
(11_alu_shift_op, 11_alu_shift_reg_op): New.
2003-12-15 Nathan Sidwell <nathan@codesourcery.com>
* config/arm/arm-protos.h (arm_no_early_store_addr_dep,
arm_no_early_alu_shift_dep, arm_no_early_mul_dep): Declare.
* config/arm/arm.c (arm_no_early_store_addr_dep,
arm_no_early_alu_shift_dep, arm_no_early_mul_dep): Define.
* config/arm/arm1026ejs.md: Add load-store bypass.
* config/arm/arm1136jfs.md (11_alu_op): Take 2 cycles.
Add bypasses between instructions.
2003-12-10 Paul Brook <paul@codesourcery.com>
* config/arm/arm.c (arm_fpu_model): New variable.
(arm_fload_abi): New variable.
(target_fpe_name): Rename from target_fp_name.
(target_fpu_name): New variable.
(arm_is_cirrus): Remove.
(fpu_desc): New struct.
(all_fpus): Define.
(pf_model_for_fpu): Define.
(all_loat_abis): Define.
(arm_override_options): Set fp arch flags based on -mfpu=
and -float-abi=.
(FIRST_FPA_REGNUM): Rename from FIRST_ARM_FP_REGNUM.
(LAST_FPA_REGNUM): Rename from LAST_ARM_FP_REGNUM.
(*): Use new TARGET_* flags.
* config/arm/arm.h (TARGET_ANY_HARD_FLOAT): Remove.
(TARGET_HARD_FLOAT): No longer implies TARGET_FPA.
(TARGET_SOFT_FLOAT): Ditto.
(TARGET_SOFT_FLOAT_ABI): New.
(TARGET_MAVERICK): Rename from TARGET_CIRRUS. No longer implies
TARGET_HARD_FLOAT.
(TARGET_VFP): No longer implies TARGET_HARD_FLOAT.
(TARGET_OPTIONS): Add -mfpu=.
(FIRST_FPA_REGNUM): Rename from FIRST_ARM_FP_REGNUM.
(LAST_FPA_REGNUM): Rename from LAST_ARM_FP_REGNUM.
(arm_pf_model): Define.
(arm_float_abi_type): Define.
(fputype): Add FPUTYPE_VFP. Change SOFT_FPA->NONE
* config/arm/arm.md: Use new TARGET_* flags.
* config/arm/cirrus.md: Ditto.
* config/arm/fpa.md: Ditto.
* config/arm/elf.h (ASM_SPEC): Pass -mfloat-abi= and -mfpu=.
* config/arm/semi.h (ASM_SPEC): Ditto.
* config/arm/netbsd-elf.h (SUBTARGET_ASM_FLOAT_SPEC): Specify vfp.
(FPUTYPE_DEFAULT): Set to VFP.
* doc/invoke.texi: Document -mfpu= and -mfloat-abi=.
2003-11-22 Phil Edwards <phil@codesourcery.com>
PR target/12476
* config/arm/arm.c (arm_output_mi_thunk): In Thumb mode, use
'bx' instead of 'b' to avoid branch range restrictions. Output
the thunk immediately before the thunked-to function.
* config/arm/arm.h (ARM_DECLARE_FUNCTION_NAME): Do not emit
.thumb_func if a thunk is being generated. Emit .code 16 along
with .thumb_func if a thunk is not being generated.
2003-11-15 Nicolas Pitre <nico@cam.org>
* config/arm/arm.md (ashldi3, arm_ashldi3_1bit, ashrdi3,
arm_ashrdi3_1bit, lshrdi3, arm_lshrdi3_1bit): New patterns.
* config/arm/iwmmxt.md (ashrdi3_iwmmxt): Renamed from ashrdi3.
(lshrdi3_iwmmxt): Renamed from lshrdi3.
* config/arm/arm.c (IWMMXT_BUILTIN2): Renamed argument accordingly.
2003-11-12 Steve Woodford <scw@wasabisystems.com>
Ian Lance Taylor <ian@wasabisystems.com>
* config/arm/lib1funcs.asm (ARM_DIV_BODY, ARM_MOD_BODY): Add new
code for __ARM_ARCH__ >= 5 && ! defined (__OPTIMIZE_SIZE__).
2003-11-05 Phil Edwards <phil@codesourcery.com>
* config/arm/arm.md (insn): Add new V6 instruction names.
(generic_sched): New attr.
* config/arm/arm-generic.md: Use generic_sched here.
* config/arm/arm1026ejs.md: Do not model fetch/issue/decode
stages of pipeline. Adjust latency counts accordingly.
* config/arm/arm1136jfs.md: New file.
2003-10-28 Mark Mitchell <mark@codesourcery.com>
* config/arm/arm.h (processor_type): New enumeration type.
(CPP_ARCH_DEFAULT_SPEC): Set appropriately for ARM 926EJ-S,
ARM1026EJ-S, ARM1136J-S, and ARM1136JF-S processor cores.
(CPP_CPU_ARCH_SPEC): Likewise.
* config/arm/arm.c (arm_tune): New variable.
(all_cores): Use cores.def.
(all_architectures): Add representative processor.
(arm_override_options): Restructure way in which tuning
information is deduced.
* arm.md: Update "insn" and "type" attributes throughout.
(insn): New attribute.
(type): Compute "mult" from "insn" attribute. Add load2,
load3, load4 alternatives.
(arm automaton): Move to arm-generic.md.
* config/arm/arm-cores.def: New file.
* config/arm/arm-generic.md: Likewise.
* config/arm/arm1026ejs.md: Likewise.
2004-02-03 Eric Botcazou <ebotcazou@libertysurf.fr>
* doc/invoke.texi (SPARC options): Remove -mflat and
all -mxxx (xxx:chip) options.
* config/sparc/aout.h (DBX_REGISTER_NUMBER): Delete.
* config/sparc/litecoff.h (DBX_REGISTER_NUMBER): Likewise.
* config/sparc/netbsd-elf.h (DBX_REGISTER_NUMBER): Likewise.
* config/sparc/sol2.h (DBX_REGISTER_NUMBER): Likewise.
* config/sparc/sparc-protos.h: Delete sparc_flat_* prototypes.
* config/sparc/sparc.c: Likewise.
(sparc_output_function_prologue): Remove TARGET_FLAT handling.
(sparc_nonflat_function_prologue): Rename into sparc_function_prologue.
(sparc_output_function_epilogue): Remove TARGET_FLAT handling.
(sparc_nonflat_function_epilogue): Rename into sparc_function_epilogue.
(struct sparc_frame_info, current_frame_info, zero_frame_info): Delete.
(sparc_flat_must_save_register_p): Likewise.
(sparc_flat_compute_frame_size): Likewise.
(sparc_flat_save_restore): Likewise.
(sparc_flat_function_prologue): Likewise.
(sparc_flat_function_epilogue): Likewise.
(sparc_flat_epilogue_delay_slots): Likewise.
(sparc_flat_eligible_for_epilogue_delay): Likewise.
(sparc_function_ok_for_sibcall): Remove TARGET_FLAT handling.
* config/sparc/sparc.h (MASK_FLAT, TARGET_FLAT): Delete.
(TARGET_SWITCHES): Remove -mflat and all -mxxx (xxx:chip) options.
(SPARC_INCOMING_INT_ARG_FIRST): Remove TARGET_FLAT handling.
(CONDITIONAL_REGISTER_USAGE): Likewise.
(FRAME_POINTER_REQUIRED): Likewise.
(INITIAL_ELIMINATION_OFFSET): Likewise.
(BASE_RETURN_VALUE_REG): Likewise.
(BASE_OUTGOING_VALUE_REG): Likewise.
(BASE_PASSING_ARG_REG): Likewise.
(BASE_INCOMING_ARG_REG): Likewise.
(INCOMING_REGNO): Likewise.
(OUTGOING_REGNO): Likewise.
(LOCAL_REGNO): Likewise.
(DELAY_SLOTS_FOR_EPILOGUE): Likewise.
(ELIGIBLE_FOR_EPILOGUE_DELAY): Likewise.
(EPILOGUE_USES): Likewise.
* config/sparc/sparc.md ("isa" attribute): Change "v6" into "v7".
("flat" attribute): Delete.
(do_builtin_setjmp_setup): Remove TARGET_FLAT and "flat" attribute
handling.
(call followed by jump define_peephole's): Delete.
(exception_receiver): Likewise.
(builtin_setjmp_receiver): Likewise.
* config/sparc/t-sparclite (MULTILIB_OPTIONS): Remove -mflat.
2004-02-03 Paolo Bonzini <bonzini@gnu.org>
PR c/11658
PR c/13994
* Makefile.in (c-parse.o, c-convert.o, c-typeck.o): Depend
on langhooks.h.
* objc/Make-lang.in (objc-parse.o): Depend on langhooks.h.
* c-parse.in, c-convert.c, c-typeck.c, objc/objc-act.c:
Include langhooks.h. Replace c_common_truthvalue_conversion
with the truthvalue_conversion language hook throughout.
(expr_no_commas): Call default_conversion before save_expr
for the first term of the production 'x ? : y'.
* c-common.c (c_common_truthvalue_conversion): Remove
obsolete block. Invoke recursively the hook instead
of this function.
* c-convert.c (convert): handle ERROR_MARK_NODE.
* c-typeck.c (build_binary_op): handle ERROR_MARK_NODE
returned by the truthvalue_conversion language hook.
* c-lang.c (LANG_HOOKS_TRUTHVALUE_CONVERSION): Use
c_objc_common_truthvalue_conversion.
* c-objc-common.c (c_objc_common_truthvalue_conversion):
New function.
* c-tree.h (c_objc_common_truthvalue_conversion): Declare it.
* objc/objc-lang.c (LANG_HOOKS_TRUTHVALUE_CONVERSION): Use
c_objc_common_truthvalue_conversion.
2004-02-03 Eric Botcazou <ebotcazou@libertysurf.fr>
* gcc.dg/20020503-1.c: Remove -mflat dg-options.
2004-02-03 Paolo Bonzini <bonzini@gnu.org>
PR c/11658
PR c/13994
* gcc.dg/noncompile/20040203-1.c: New test.
* gcc.dg/noncompile/20040203-2.c: Likewise.
* gcc.dg/noncompile/20040203-3.c: Likewise.
* gcc.dg/20040203-1.c: Likewise.