This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
[patch 1/28] top-level: Use automake-1.11.6
- From: Michael Haubenwallner <michael dot haubenwallner at ssi-schaefer dot com>
- To: Paolo Bonzini <bonzini at gnu dot org>, DJ Delorie <dj at redhat dot com>, Nathanael Nerode <neroden at gcc dot gnu dot org>, Alexandre Oliva <aoliva at redhat dot com>, Ralf Wildenhues <Ralf dot Wildenhues at gmx dot de>
- Cc: Jan-Benedict Glaw <jbglaw at lug-owl dot de>, GCC Patches <gcc-patches at gcc dot gnu dot org>, Bernd Edlinger <bernd dot edlinger at hotmail dot de>, Janne Blomqvist <jb at gcc dot gnu dot org>, Kai Tietz <ktietz at redhat dot com>
- Date: Wed, 06 May 2015 10:50:57 +0200
- Subject: [patch 1/28] top-level: Use automake-1.11.6
- Authentication-results: sourceware.org; auth=none
- References: <5548E9C3 dot 1090408 at ssi-schaefer dot com>
Am 2015-05-05 um 18:03 schrieb Michael Haubenwallner:
> Now that gcc-5 is out, what about an automake-1.11.6 update for gcc-6?
Patch for top-level files.
2015-05-06 Michael Haubenwallner <michael.haubenwallner@ssi-schaefer.com>
Use automake-1.11.6.
compile: Recreate.
config.guess: Recreate.
config.sub: Recreate.
depcomp: Recreate.
install-sh: Recreate.
missing: Recreate.
mkinstalldirs: Recreate.
Index: compile
===================================================================
--- compile (revision 222804)
+++ compile (working copy)
@@ -1,9 +1,10 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
-scriptversion=2012-10-14.11; # UTC
+scriptversion=2012-03-05.13; # UTC
-# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free
+# Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
@@ -112,11 +113,6 @@
lib=$dir/$lib.lib
break
fi
- if test -f "$dir/lib$lib.a"; then
- found=yes
- lib=$dir/lib$lib.a
- break
- fi
done
IFS=$save_IFS
Index: config.guess
===================================================================
--- config.guess (revision 222804)
+++ config.guess (working copy)
@@ -2,7 +2,7 @@
# Attempt to guess a canonical system name.
# Copyright 1992-2015 Free Software Foundation, Inc.
-timestamp='2015-01-01'
+timestamp='2015-03-04'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -168,8 +168,10 @@
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+ /sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || \
+ echo unknown)`
case "${UNAME_MACHINE_ARCH}" in
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
@@ -176,12 +178,17 @@
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
+ earmv*)
+ arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
+ endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'`
+ machine=${arch}${endian}-unknown
+ ;;
*) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
# to ELF recently, or will in the future.
case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ arm*|earm*|i386|m68k|ns32k|sh3*|sparc|vax)
eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ELF__
@@ -197,6 +204,13 @@
os=netbsd
;;
esac
+ # Determine ABI tags.
+ case "${UNAME_MACHINE_ARCH}" in
+ earm*)
+ expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+ abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
+ ;;
+ esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
@@ -213,7 +227,7 @@
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
+ echo "${machine}-${os}${release}${abi}"
exit ;;
*:Bitrig:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
@@ -933,6 +947,9 @@
crisv32:Linux:*:*)
echo ${UNAME_MACHINE}-axis-linux-${LIBC}
exit ;;
+ e2k:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
frv:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
@@ -1021,7 +1038,18 @@
echo ${UNAME_MACHINE}-dec-linux-${LIBC}
exit ;;
x86_64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ eval $set_cc_for_build
+ X86_64_ABI=
+ # If there is a compiler, see if it is configured for 32-bit objects.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __ILP32__'; echo IS_X32; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_X32 >/dev/null
+ then
+ X86_64_ABI=x32
+ fi
+ fi
+ echo x86_64-unknown-linux-gnu${X86_64_ABI}
exit ;;
xtensa*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
Index: config.sub
===================================================================
--- config.sub (revision 222804)
+++ config.sub (working copy)
@@ -2,7 +2,7 @@
# Configuration validation subroutine script.
# Copyright 1992-2015 Free Software Foundation, Inc.
-timestamp='2015-01-01'
+timestamp='2015-03-04'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -117,7 +117,7 @@
case $maybe_os in
nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
- knetbsd*-gnu* | netbsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
kopensolaris*-gnu* | \
storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
@@ -258,8 +258,8 @@
| be32 | be64 \
| bfin \
| c4x | c8051 | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | epiphany \
+ | d10v | d30v | dlx | dsp16xx | dvp \
+ | e2k | epiphany \
| fido | fr30 | frv | ft32 \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| hexagon \
@@ -381,7 +381,7 @@
| c[123]* | c30-* | [cjt]90-* | c4x-* \
| c8051-* | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
- | elxsi-* \
+ | e2k-* | elxsi-* \
| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
@@ -823,6 +823,24 @@
basic_machine=m68k-atari
os=-mint
;;
+ mipsEE* | ee | ps2)
+ basic_machine=mips64r5900el-scei
+ case $os in
+ -linux*)
+ ;;
+ *)
+ os=-elf
+ ;;
+ esac
+ ;;
+ iop)
+ basic_machine=mipsel-scei
+ os=-irx
+ ;;
+ dvp)
+ basic_machine=dvp-scei
+ os=-elf
+ ;;
mips3*-*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
;;
@@ -1389,7 +1407,7 @@
| -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -irx* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
Index: depcomp
===================================================================
--- depcomp (revision 222804)
+++ depcomp (working copy)
@@ -1,9 +1,10 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2013-05-30.07; # UTC
+scriptversion=2012-03-27.16; # UTC
-# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -27,9 +28,9 @@
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -56,65 +57,11 @@
;;
esac
-# Get the directory component of the given path, and save it in the
-# global variables '$dir'. Note that this directory component will
-# be either empty or ending with a '/' character. This is deliberate.
-set_dir_from ()
-{
- case $1 in
- */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
- *) dir=;;
- esac
-}
-
-# Get the suffix-stripped basename of the given path, and save it the
-# global variable '$base'.
-set_base_from ()
-{
- base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
-}
-
-# If no dependency file was actually created by the compiler invocation,
-# we still have to create a dummy depfile, to avoid errors with the
-# Makefile "include basename.Plo" scheme.
-make_dummy_depfile ()
-{
- echo "#dummy" > "$depfile"
-}
-
-# Factor out some common post-processing of the generated depfile.
-# Requires the auxiliary global variable '$tmpdepfile' to be set.
-aix_post_process_depfile ()
-{
- # If the compiler actually managed to produce a dependency file,
- # post-process it.
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependency.h'.
- # Do two passes, one to just change these to
- # $object: dependency.h
- # and one to simply output
- # dependency.h:
- # which is needed to avoid the deleted-header problem.
- { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
- sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
- } > "$depfile"
- rm -f "$tmpdepfile"
- else
- make_dummy_depfile
- fi
-}
-
# A tabulation character.
tab=' '
# A newline character.
nl='
'
-# Character ranges might be problematic outside the C locale.
-# These definitions help.
-upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
-lower=abcdefghijklmnopqrstuvwxyz
-digits=0123456789
-alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -128,9 +75,6 @@
rm -f "$tmpdepfile"
-# Avoid interferences from the environment.
-gccflag= dashmflag=
-
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
@@ -142,32 +86,32 @@
fi
if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
fi
if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
fi
case "$depmode" in
@@ -190,7 +134,8 @@
done
"$@"
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
@@ -198,9 +143,6 @@
;;
gcc)
-## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
-## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
-## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
@@ -207,8 +149,7 @@
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say). Also, it might not be
-## supported by the other compilers which use the 'gcc' depmode.
+## -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
@@ -216,14 +157,15 @@
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- # The second -e expression handles DOS-style file names with drive
- # letters.
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
@@ -232,6 +174,7 @@
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
+ tr ' ' "$nl" < "$tmpdepfile" |
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
@@ -238,9 +181,8 @@
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -251,6 +193,47 @@
exit 1
;;
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like '#:fec' to the end of the
+ # dependency line.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr "$nl" ' ' >> "$depfile"
+ echo >> "$depfile"
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
xlc)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
@@ -264,8 +247,9 @@
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- set_dir_from "$object"
- set_base_from "$object"
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
@@ -278,7 +262,9 @@
"$@" -M
fi
stat=$?
- if test $stat -ne 0; then
+
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
@@ -287,113 +273,65 @@
do
test -f "$tmpdepfile" && break
done
- aix_post_process_depfile
- ;;
-
-tcc)
- # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
- # FIXME: That version still under development at the moment of writing.
- # Make that this statement remains true also for stable, released
- # versions.
- # It will wrap lines (doesn't matter whether long or short) with a
- # trailing '\', as in:
- #
- # foo.o : \
- # foo.c \
- # foo.h \
- #
- # It will put a trailing '\' even on the last line, and will use leading
- # spaces rather than leading tabs (at least since its commit 0394caf7
- # "Emit spaces for -MD").
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
fi
- rm -f "$depfile"
- # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
- # We have to change lines of the first kind to '$object: \'.
- sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
- # And for each line of the second kind, we have to emit a 'dep.h:'
- # dummy dependency, to avoid the deleted-header problem.
- sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
-## The order of this option in the case statement is important, since the
-## shell code in configure will try each of these formats in the order
-## listed in this file. A plain '-MD' option would be understood by many
-## compilers, so we must ensure this comes after the gcc and icc options.
-pgcc)
- # Portland's C compiler understands '-MD'.
- # Will always output deps to 'file.d' where file is the root name of the
- # source file under compilation, even if file resides in a subdirectory.
- # The object file name does not affect the name of the '.d' file.
- # pgcc 10.2 will output
+icc)
+ # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
+ # However on
+ # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\' :
+ # and will wrap long lines using '\':
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- set_dir_from "$object"
- # Use the source, not the object, to determine the base name, since
- # that's sadly what pgcc will do too.
- set_base_from "$source"
- tmpdepfile=$base.d
-
- # For projects that build the same source file twice into different object
- # files, the pgcc approach of using the *source* file root name can cause
- # problems in parallel builds. Use a locking strategy to avoid stomping on
- # the same $tmpdepfile.
- lockdir=$base.d-lock
- trap "
- echo '$0: caught signal, cleaning up...' >&2
- rmdir '$lockdir'
- exit 1
- " 1 2 13 15
- numtries=100
- i=$numtries
- while test $i -gt 0; do
- # mkdir is a portable test-and-set.
- if mkdir "$lockdir" 2>/dev/null; then
- # This process acquired the lock.
- "$@" -MD
- stat=$?
- # Release the lock.
- rmdir "$lockdir"
- break
- else
- # If the lock is being held by a different process, wait
- # until the winning process is done or we timeout.
- while test -d "$lockdir" && test $i -gt 0; do
- sleep 1
- i=`expr $i - 1`
- done
- fi
- i=`expr $i - 1`
- done
- trap - 1 2 13 15
- if test $i -le 0; then
- echo "$0: failed to acquire lock after $numtries attempts" >&2
- echo "$0: check lockdir '$lockdir'" >&2
- exit 1
- fi
-
- if test $stat -ne 0; then
+ # tcc 0.9.26 (FIXME still under development at the moment of writing)
+ # will emit a similar output, but also prepend the continuation lines
+ # with horizontal tabulation characters.
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Each line is of the form 'foo.o: dependent.h',
+ # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
# Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
- | sed -e 's/$/ :/' >> "$depfile"
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
+ sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
+ < "$tmpdepfile" > "$depfile"
+ sed '
+ s/[ '"$tab"'][ '"$tab"']*/ /g
+ s/^ *//
+ s/ *\\*$//
+ s/^[^:]*: *//
+ /^$/d
+ /:$/d
+ s/$/ :/
+ ' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -404,8 +342,9 @@
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
- set_dir_from "$object"
- set_base_from "$object"
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
@@ -416,7 +355,8 @@
"$@" +Maked
fi
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
@@ -426,61 +366,76 @@
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
else
- make_dummy_depfile
+ echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- set_dir_from "$object"
- set_base_from "$object"
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- # Libtool generates 2 separate objects for the 2 libraries. These
- # two compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir$base.o.d # libtool 1.5
- tmpdepfile2=$dir.libs/$base.o.d # Likewise.
- tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- "$@" -MD
- fi
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- # Same post-processing that is required for AIX mode.
- aix_post_process_depfile
- ;;
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
msvc7)
if test "$libtool" = yes; then
@@ -491,7 +446,8 @@
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
- if test $stat -ne 0; then
+ if test "$stat" = 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
@@ -517,7 +473,6 @@
G
p
}' >> "$depfile"
- echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
@@ -569,14 +524,13 @@
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
- sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+ sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this sed invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ tr ' ' "$nl" < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -629,12 +583,10 @@
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process the last invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed '1,2d' "$tmpdepfile" \
- | tr ' ' "$nl" \
- | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
@@ -670,10 +622,10 @@
esac
done
- "$@" -E \
- | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- | sed '$ s: \\$::' > "$tmpdepfile"
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -705,15 +657,15 @@
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
+ set fnord "$@"
+ shift
+ shift
+ ;;
*)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
esac
done
"$@" -E 2>/dev/null |
Index: install-sh
===================================================================
--- install-sh (revision 222804)
+++ install-sh (working copy)
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2013-12-25.23; # UTC
+scriptversion=2011-01-19.21; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,21 +35,25 @@
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
+# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
-tab=' '
nl='
'
-IFS=" $tab$nl"
+IFS=" "" $nl"
-# Set DOITPROG to "echo" to test this script.
+# set DOITPROG to echo to test this script
+# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-doit_exec=${doit:-exec}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
@@ -64,6 +68,17 @@
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
posix_mkdir=
# Desired mode of installed file.
@@ -82,7 +97,7 @@
dst_arg=
copy_on_change=false
-is_target_a_directory=possibly
+no_target_directory=
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -122,41 +137,40 @@
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
-s) stripcmd=$stripprog;;
- -t)
- is_target_a_directory=always
- dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
+ -t) dst_arg=$2
+ # Protect names problematic for `test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
- -T) is_target_a_directory=never;;
+ -T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
@@ -163,16 +177,6 @@
shift
done
-# We allow the use of options -d and -T together, by making -d
-# take the precedence; this is for compatibility with GNU install.
-
-if test -n "$dir_arg"; then
- if test -n "$dst_arg"; then
- echo "$0: target directory not allowed when installing a directory." >&2
- exit 1
- fi
-fi
-
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
@@ -186,7 +190,7 @@
fi
shift # arg
dst_arg=$arg
- # Protect names problematic for 'test' and other utilities.
+ # Protect names problematic for `test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
@@ -198,21 +202,12 @@
echo "$0: no input file specified." >&2
exit 1
fi
- # It's OK to call 'install-sh -d' without argument.
+ # It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
- if test $# -gt 1 || test "$is_target_a_directory" = always; then
- if test ! -d "$dst_arg"; then
- echo "$0: $dst_arg: Is not a directory." >&2
- exit 1
- fi
- fi
-fi
-
-if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
@@ -228,16 +223,16 @@
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
@@ -245,7 +240,7 @@
for src
do
- # Protect names problematic for 'test' and other utilities.
+ # Protect names problematic for `test' and other utilities.
case $src in
-* | [=\(\)!]) src=./$src;;
esac
@@ -274,15 +269,41 @@
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
- if test "$is_target_a_directory" = never; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
- dstdir=`dirname "$dst"`
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
test -d "$dstdir"
dstdir_status=$?
fi
@@ -293,74 +314,74 @@
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
@@ -370,17 +391,19 @@
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
esac
+ eval "$initialize_posix_glob"
+
oIFS=$IFS
IFS=/
- set -f
+ $posix_glob set -f
set fnord $dstdir
shift
- set +f
+ $posix_glob set +f
IFS=$oIFS
prefixes=
@@ -387,34 +410,34 @@
for d
do
- test X"$d" = X && continue
+ test X"$d" = X && continue
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
@@ -449,12 +472,15 @@
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
- set -f &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
- set +f &&
+ $posix_glob set +f &&
+
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
@@ -467,24 +493,24 @@
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
Index: missing
===================================================================
--- missing (revision 222804)
+++ missing (working copy)
@@ -1,10 +1,11 @@
#! /bin/sh
-# Common wrapper for a few potentially missing GNU programs.
+# Common stub for a few missing GNU programs while installing.
-scriptversion=2013-10-28.13; # UTC
+scriptversion=2012-01-06.13; # UTC
-# Copyright (C) 1996-2014 Free Software Foundation, Inc.
-# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -25,40 +26,68 @@
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
- echo 1>&2 "Try '$0 --help' for more information"
+ echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
-case $1 in
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
- --is-lightweight)
- # Used by our autoconf macros to check whether the available missing
- # script is modern enough.
- exit 0
- ;;
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
- --run)
- # Back-compat with the calling convention used by older automake.
- shift
- ;;
+msg="missing on your system"
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-to PROGRAM being missing or too old.
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
- aclocal autoconf autoheader autom4te automake makeinfo
- bison yacc flex lex help2man
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
Send bug reports to <bug-automake@gnu.org>."
exit $?
@@ -70,142 +99,229 @@
;;
-*)
- echo 1>&2 "$0: unknown '$1' option"
- echo 1>&2 "Try '$0 --help' for more information"
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
esac
-# Run the given program, remember its exit status.
-"$@"; st=$?
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
-# Exit code 63 means version mismatch. This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
- msg="probably too old"
-elif test $st -eq 127; then
- # Program was missing.
- msg="missing on your system"
-else
- # Program was found and executed, but failed. Give up.
- exit $st
-fi
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
-perl_URL=http://www.perl.org/
-flex_URL=http://flex.sourceforge.net/
-gnu_software_URL=http://www.gnu.org/software
+ autoconf*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
-program_details ()
-{
- case $1 in
- aclocal|automake)
- echo "The '$1' program is part of the GNU Automake package:"
- echo "<$gnu_software_URL/automake>"
- echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
- echo "<$gnu_software_URL/autoconf>"
- echo "<$gnu_software_URL/m4/>"
- echo "<$perl_URL>"
- ;;
- autoconf|autom4te|autoheader)
- echo "The '$1' program is part of the GNU Autoconf package:"
- echo "<$gnu_software_URL/autoconf/>"
- echo "It also requires GNU m4 and Perl in order to run:"
- echo "<$gnu_software_URL/m4/>"
- echo "<$perl_URL>"
- ;;
- esac
-}
+ autoheader*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
-give_advice ()
-{
- # Normalize program name to check for.
- normalized_program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
- printf '%s\n' "'$1' is $msg."
+ autom4te*)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
- configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
- case $normalized_program in
- autoconf*)
- echo "You should only need it if you modified 'configure.ac',"
- echo "or m4 files included by it."
- program_details 'autoconf'
- ;;
- autoheader*)
- echo "You should only need it if you modified 'acconfig.h' or"
- echo "$configure_deps."
- program_details 'autoheader'
- ;;
- automake*)
- echo "You should only need it if you modified 'Makefile.am' or"
- echo "$configure_deps."
- program_details 'automake'
- ;;
- aclocal*)
- echo "You should only need it if you modified 'acinclude.m4' or"
- echo "$configure_deps."
- program_details 'aclocal'
- ;;
- autom4te*)
- echo "You might have modified some maintainer files that require"
- echo "the 'autom4te' program to be rebuilt."
- program_details 'autom4te'
- ;;
- bison*|yacc*)
- echo "You should only need it if you modified a '.y' file."
- echo "You may want to install the GNU Bison package:"
- echo "<$gnu_software_URL/bison/>"
- ;;
- lex*|flex*)
- echo "You should only need it if you modified a '.l' file."
- echo "You may want to install the Fast Lexical Analyzer package:"
- echo "<$flex_URL>"
- ;;
- help2man*)
- echo "You should only need it if you modified a dependency" \
- "of a man page."
- echo "You may want to install the GNU Help2man package:"
- echo "<$gnu_software_URL/help2man/>"
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
;;
- makeinfo*)
- echo "You should only need it if you modified a '.texi' file, or"
- echo "any other file indirectly affecting the aspect of the manual."
- echo "You might want to install the Texinfo package:"
- echo "<$gnu_software_URL/texinfo/>"
- echo "The spurious makeinfo call might also be the consequence of"
- echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
- echo "want to install GNU make:"
- echo "<$gnu_software_URL/make/>"
- ;;
- *)
- echo "You might have modified some files without having the proper"
- echo "tools for further handling them. Check the 'README' file, it"
- echo "often tells you about the needed prerequisites for installing"
- echo "this package. You may also peek at any GNU archive site, in"
- echo "case some other package contains this missing '$1' program."
- ;;
- esac
-}
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
- -e '2,$s/^/ /' >&2
+ bison*|yacc*)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
-# Propagate the correct exit status (expected to be 127 for a program
-# not found, 63 for a program that failed due to version mismatch).
-exit $st
+ lex*|flex*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+ help2man*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit $?
+ fi
+ ;;
+
+ makeinfo*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
Index: mkinstalldirs
===================================================================
--- mkinstalldirs (revision 222804)
+++ mkinstalldirs (working copy)
@@ -81,9 +81,9 @@
echo "mkdir -p -- $*"
exec mkdir -p -- "$@"
else
- # On NextStep and OpenStep, the 'mkdir' command does not
+ # On NextStep and OpenStep, the `mkdir' command does not
# recognize any option. It will interpret all options as
- # directories to create, and then abort because '.' already
+ # directories to create, and then abort because `.' already
# exists.
test -d ./-p && rmdir ./-p
test -d ./--version && rmdir ./--version