This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
[patch] flatten/adjust optabs.h
- From: Andrew MacLeod <amacleod at redhat dot com>
- To: gcc-patches <gcc-patches at gcc dot gnu dot org>
- Cc: Jeff Law <law at redhat dot com>, Richard Biener <richard dot guenther at gmail dot com>, Michael Collison <michael dot collison at linaro dot org>
- Date: Thu, 30 Oct 2014 11:42:55 -0400
- Subject: [patch] flatten/adjust optabs.h
- Authentication-results: sourceware.org; auth=none
This patch "adjusts" optabs.h. which was really sub-work of looking at
expr.h.
I moved the prototypes from expr.h to optabs.h that belong there, and
realigned the stuff in optabs.h to be in the same order as the .c file.
I also moved gen_move_insn from optabs.c to expr.c... a number of new
files would have required optabs.h to compile just for that funciton,
and gen_move_insn primarily calls emit-move_insn_1 which is defined in
expr.c anyway.. so it makes sense to be there.
the one thing Im on the fence about is insn-opinit.h. This is *only*
included from optabs.h, so I am inclined to leave it as an include from
optabs.h. We'd likely just be putting it back there later anyway.
I also moved the first section of optabs.h into genopinit.c... that
contains the parts which define structures, prototypes and a couple of
small inlines for things in insn-opinit.c.. so I figured we may as well
may insn-opinit.h follow the same pattern and list the exports and such
for insn-opinit.c. Now, ultimately I don't feel strongly about that
since insn-opinit.h is always included from optabs.h... if someone
objects I can move them back out of the generated file.
Other than that, its just more header adjustments.
bootstraps on x86_64-unknown-linux-gnu, testsuite regressions a re
running (I expect none again) and I'll ruin it through a full set of
targets from contrib/config-list.mk.
Assuming no issues, ok for trunk?
Andrew
* optabs.h: Flatten insn-codes.h to source files. Move some prototypes
and structs to genopinit.c. Adjust protyoptypes to match optabs.c.
* genopinit.c (main): Emit prototypes and structs into insn-opinit.h.
* optabs.c: (gen_move_insn): Move to expr.c.
* expr.h: Move protypes and enums to optabs.h.
* expr.c: (gen_move_insn): Relocate from optabs.c.
* genemit.c (main): Include insn-codes.h.
* gengtype.c (open_base_files): Include insn-codes.h.
Index: optabs.h
===================================================================
--- optabs.h (revision 216804)
+++ optabs.h (working copy)
@@ -20,244 +20,11 @@
#ifndef GCC_OPTABS_H
#define GCC_OPTABS_H
-#include "insn-codes.h"
#include "insn-opinit.h"
-typedef enum optab_tag optab;
-typedef enum optab_tag convert_optab;
-typedef enum optab_tag direct_optab;
-
-struct optab_libcall_d
-{
- char libcall_suffix;
- const char *libcall_basename;
- void (*libcall_gen) (optab, const char *name,
- char suffix, enum machine_mode);
-};
-
-struct convert_optab_libcall_d
-{
- const char *libcall_basename;
- void (*libcall_gen) (convert_optab, const char *name,
- enum machine_mode, enum machine_mode);
-};
-
-/* Given an enum insn_code, access the function to construct
- the body of that kind of insn. */
-#define GEN_FCN(CODE) (insn_data[CODE].genfun)
-
-/* Contains the optab used for each rtx code, and vice-versa. */
-extern const optab code_to_optab_[NUM_RTX_CODE];
-extern const enum rtx_code optab_to_code_[NUM_OPTABS];
-
-static inline optab
-code_to_optab (enum rtx_code code)
-{
- return code_to_optab_[code];
-}
-
-static inline enum rtx_code
-optab_to_code (optab op)
-{
- return optab_to_code_[op];
-}
-
-extern const struct convert_optab_libcall_d convlib_def[NUM_CONVLIB_OPTABS];
-extern const struct optab_libcall_d normlib_def[NUM_NORMLIB_OPTABS];
-
-/* Returns the active icode for the given (encoded) optab. */
-extern enum insn_code raw_optab_handler (unsigned);
-extern bool swap_optab_enable (optab, enum machine_mode, bool);
-
-/* Target-dependent globals. */
-struct target_optabs {
- /* Patterns that are used by optabs that are enabled for this target. */
- bool pat_enable[NUM_OPTAB_PATTERNS];
-};
-
-extern struct target_optabs default_target_optabs;
-extern struct target_optabs *this_fn_optabs;
-#if SWITCHABLE_TARGET
-extern struct target_optabs *this_target_optabs;
-#else
-#define this_target_optabs (&default_target_optabs)
-#endif
-
-/* Define functions given in optabs.c. */
-
-extern rtx expand_widen_pattern_expr (sepops ops, rtx op0, rtx op1, rtx wide_op,
- rtx target, int unsignedp);
-
-extern rtx expand_ternary_op (enum machine_mode mode, optab ternary_optab,
- rtx op0, rtx op1, rtx op2, rtx target,
- int unsignedp);
-
-/* Expand a binary operation given optab and rtx operands. */
-extern rtx expand_binop (enum machine_mode, optab, rtx, rtx, rtx, int,
- enum optab_methods);
-
-extern rtx simplify_expand_binop (enum machine_mode mode, optab binoptab,
- rtx op0, rtx op1, rtx target, int unsignedp,
- enum optab_methods methods);
-
-extern bool force_expand_binop (enum machine_mode, optab, rtx, rtx, rtx, int,
- enum optab_methods);
-
-/* Expand a binary operation with both signed and unsigned forms. */
-extern rtx sign_expand_binop (enum machine_mode, optab, optab, rtx, rtx,
- rtx, int, enum optab_methods);
-
-/* Generate code to perform an operation on one operand with two results. */
-extern int expand_twoval_unop (optab, rtx, rtx, rtx, int);
-
-/* Generate code to perform an operation on two operands with two results. */
-extern int expand_twoval_binop (optab, rtx, rtx, rtx, rtx, int);
-
-/* Generate code to perform an operation on two operands with two
- results, using a library function. */
-extern bool expand_twoval_binop_libfunc (optab, rtx, rtx, rtx, rtx,
- enum rtx_code);
-
-/* Expand a unary arithmetic operation given optab rtx operand. */
-extern rtx expand_unop (enum machine_mode, optab, rtx, rtx, int);
-
-/* Expand the absolute value operation. */
-extern rtx expand_abs_nojump (enum machine_mode, rtx, rtx, int);
-extern rtx expand_abs (enum machine_mode, rtx, rtx, int, int);
-
-/* Expand the one's complement absolute value operation. */
-extern rtx expand_one_cmpl_abs_nojump (enum machine_mode, rtx, rtx);
-
-/* Expand the copysign operation. */
-extern rtx expand_copysign (rtx, rtx, rtx);
-
-/* Generate an instruction with a given INSN_CODE with an output and
- an input. */
-extern void emit_unop_insn (enum insn_code, rtx, rtx, enum rtx_code);
-extern bool maybe_emit_unop_insn (enum insn_code, rtx, rtx, enum rtx_code);
-
-/* Find a widening optab even if it doesn't widen as much as we want. */
-#define find_widening_optab_handler(A,B,C,D) \
- find_widening_optab_handler_and_mode (A, B, C, D, NULL)
-extern enum insn_code find_widening_optab_handler_and_mode (optab,
- enum machine_mode,
- enum machine_mode,
- int,
- enum machine_mode *);
-extern enum insn_code widening_optab_handler (optab, enum machine_mode,
- enum machine_mode);
-
-/* An extra flag to control optab_for_tree_code's behavior. This is needed to
- distinguish between machines with a vector shift that takes a scalar for the
- shift amount vs. machines that take a vector for the shift amount. */
-enum optab_subtype
-{
- optab_default,
- optab_scalar,
- optab_vector
-};
-
-/* Return the optab used for computing the given operation on the type given by
- the second argument. The third argument distinguishes between the types of
- vector shifts and rotates */
-extern optab optab_for_tree_code (enum tree_code, const_tree, enum optab_subtype);
-
-/* Given an optab that reduces a vector to a scalar, find instead the old
- optab that produces a vector with the reduction result in one element,
- for a tree with the specified type. */
-extern optab scalar_reduc_to_vector (optab, const_tree type);
-
-/* The various uses that a comparison can have; used by can_compare_p:
- jumps, conditional moves, store flag operations. */
-enum can_compare_purpose
-{
- ccp_jump,
- ccp_cmov,
- ccp_store_flag
-};
-
-/* Nonzero if a compare of mode MODE can be done straightforwardly
- (without splitting it into pieces). */
-extern int can_compare_p (enum rtx_code, enum machine_mode,
- enum can_compare_purpose);
-
-/* Return the INSN_CODE to use for an extend operation. */
-extern enum insn_code can_extend_p (enum machine_mode, enum machine_mode, int);
-
-/* Generate the body of an insn to extend Y (with mode MFROM)
- into X (with mode MTO). Do zero-extension if UNSIGNEDP is nonzero. */
-extern rtx gen_extend_insn (rtx, rtx, enum machine_mode,
- enum machine_mode, int);
-
-/* Call this to reset the function entry for one optab. */
-extern void set_optab_libfunc (optab, enum machine_mode, const char *);
-extern void set_conv_libfunc (convert_optab, enum machine_mode,
- enum machine_mode, const char *);
-
-/* Call this to install all of the __sync libcalls up to size MAX. */
-extern void init_sync_libfuncs (int max);
-
-/* Generate code for a FIXED_CONVERT_EXPR. */
-extern void expand_fixed_convert (rtx, rtx, int, int);
-
-/* Generate code for a FLOAT_EXPR. */
-extern void expand_float (rtx, rtx, int);
-
-/* Return the insn_code for a FLOAT_EXPR. */
-enum insn_code can_float_p (enum machine_mode, enum machine_mode, int);
-
-/* Return true if there is an inline compare and swap pattern. */
-extern bool can_compare_and_swap_p (enum machine_mode, bool);
-
-/* Return true if there is an inline atomic exchange pattern. */
-extern bool can_atomic_exchange_p (enum machine_mode, bool);
-
-/* Generate code for a compare and swap. */
-extern bool expand_atomic_compare_and_swap (rtx *, rtx *, rtx, rtx, rtx, bool,
- enum memmodel, enum memmodel);
-
-/* Generate memory barriers. */
-extern void expand_mem_thread_fence (enum memmodel);
-extern void expand_mem_signal_fence (enum memmodel);
-
-/* Check whether an operation represented by the code CODE is a
- convert operation that is supported by the target platform in
- vector form */
-bool supportable_convert_operation (enum tree_code, tree, tree, tree *,
- enum tree_code *);
-
-/* Generate code for a FIX_EXPR. */
-extern void expand_fix (rtx, rtx, int);
-
-/* Generate code for float to integral conversion. */
-extern bool expand_sfix_optab (rtx, rtx, convert_optab);
-
/* Generate code for a widening multiply. */
extern rtx expand_widening_mult (enum machine_mode, rtx, rtx, rtx, int, optab);
-/* Return tree if target supports vector operations for COND_EXPR. */
-bool expand_vec_cond_expr_p (tree, tree);
-
-/* Generate code for VEC_COND_EXPR. */
-extern rtx expand_vec_cond_expr (tree, tree, tree, tree, rtx);
-/* Generate code for VEC_RSHIFT_EXPR. */
-extern rtx expand_vec_shift_expr (sepops, rtx);
-
-/* Return true if target supports vector operations for VEC_PERM_EXPR. */
-extern bool can_vec_perm_p (enum machine_mode, bool, const unsigned char *);
-
-/* Generate code for VEC_PERM_EXPR. */
-extern rtx expand_vec_perm (enum machine_mode, rtx, rtx, rtx, rtx);
-
-/* Return non-zero if target supports a given highpart multiplication. */
-extern int can_mult_highpart_p (enum machine_mode, bool);
-
-/* Generate code for MULT_HIGHPART_EXPR. */
-extern rtx expand_mult_highpart (enum machine_mode, rtx, rtx, rtx, bool);
-
-/* Return true if target supports vector masked load/store for mode. */
-extern bool can_vec_mask_load_store_p (enum machine_mode, bool);
-
/* Return the insn used to implement mode MODE of OP, or CODE_FOR_nothing
if the target does not have such an insn. */
@@ -310,10 +77,8 @@
|| binoptab == smulv_optab);
}
-extern rtx optab_libfunc (optab optab, enum machine_mode mode);
-extern rtx convert_optab_libfunc (convert_optab optab, enum machine_mode mode1,
- enum machine_mode mode2);
+
/* Describes an instruction that inserts or extracts a bitfield. */
struct extraction_insn
{
@@ -333,22 +98,9 @@
enum machine_mode pos_mode;
};
-/* Enumerates the possible extraction_insn operations. */
-enum extraction_pattern { EP_insv, EP_extv, EP_extzv };
-extern bool get_best_reg_extraction_insn (extraction_insn *,
- enum extraction_pattern,
- unsigned HOST_WIDE_INT,
- enum machine_mode);
-extern bool get_best_mem_extraction_insn (extraction_insn *,
- enum extraction_pattern,
- HOST_WIDE_INT, HOST_WIDE_INT,
- enum machine_mode);
-extern bool insn_operand_matches (enum insn_code icode, unsigned int opno,
- rtx operand);
-
/* Describes the type of an expand_operand. Each value is associated
with a create_*_operand function; see the comments above those
functions for details. */
@@ -452,8 +204,6 @@
create_expand_operand (op, EXPAND_CONVERT_FROM, value, mode, unsigned_p);
}
-extern void create_convert_operand_from_type (struct expand_operand *op,
- rtx value, tree type);
/* Make OP describe an input Pmode address operand. VALUE is the value
of the address, but it may need to be converted to Pmode first. */
@@ -476,25 +226,203 @@
create_expand_operand (op, EXPAND_INTEGER, GEN_INT (intval), VOIDmode, false);
}
-extern bool valid_multiword_target_p (rtx);
-extern bool maybe_legitimize_operands (enum insn_code icode,
- unsigned int opno, unsigned int nops,
- struct expand_operand *ops);
-extern rtx maybe_gen_insn (enum insn_code icode, unsigned int nops,
- struct expand_operand *ops);
-extern bool maybe_expand_insn (enum insn_code icode, unsigned int nops,
- struct expand_operand *ops);
-extern bool maybe_expand_jump_insn (enum insn_code icode, unsigned int nops,
- struct expand_operand *ops);
-extern void expand_insn (enum insn_code icode, unsigned int nops,
- struct expand_operand *ops);
-extern void expand_jump_insn (enum insn_code icode, unsigned int nops,
- struct expand_operand *ops);
+extern rtx convert_optab_libfunc (convert_optab optab, enum machine_mode mode1,
+ enum machine_mode mode2);
+extern rtx optab_libfunc (optab optab, enum machine_mode mode);
+extern enum insn_code widening_optab_handler (optab, enum machine_mode,
+ enum machine_mode);
+/* Find a widening optab even if it doesn't widen as much as we want. */
+#define find_widening_optab_handler(A,B,C,D) \
+ find_widening_optab_handler_and_mode (A, B, C, D, NULL)
+extern enum insn_code find_widening_optab_handler_and_mode (optab,
+ enum machine_mode,
+ enum machine_mode,
+ int,
+ enum machine_mode *);
+/* An extra flag to control optab_for_tree_code's behavior. This is needed to
+ distinguish between machines with a vector shift that takes a scalar for the
+ shift amount vs. machines that take a vector for the shift amount. */
+enum optab_subtype
+{
+ optab_default,
+ optab_scalar,
+ optab_vector
+};
+
+/* Passed to expand_simple_binop and expand_binop to say which options
+ to try to use if the requested operation can't be open-coded on the
+ requisite mode. Either OPTAB_LIB or OPTAB_LIB_WIDEN says try using
+ a library call. Either OPTAB_WIDEN or OPTAB_LIB_WIDEN says try
+ using a wider mode. OPTAB_MUST_WIDEN says try widening and don't
+ try anything else. */
+
+enum optab_methods
+{
+ OPTAB_DIRECT,
+ OPTAB_LIB,
+ OPTAB_WIDEN,
+ OPTAB_LIB_WIDEN,
+ OPTAB_MUST_WIDEN
+};
+
+/* Return the optab used for computing the given operation on the type given by
+ the second argument. The third argument distinguishes between the types of
+ vector shifts and rotates */
+extern optab optab_for_tree_code (enum tree_code, const_tree, enum optab_subtype);
+
+/* Given an optab that reduces a vector to a scalar, find instead the old
+ optab that produces a vector with the reduction result in one element,
+ for a tree with the specified type. */
+extern optab scalar_reduc_to_vector (optab, const_tree type);
+
+extern rtx expand_widen_pattern_expr (struct separate_ops *, rtx , rtx , rtx,
+ rtx, int);
+extern rtx expand_ternary_op (enum machine_mode mode, optab ternary_optab,
+ rtx op0, rtx op1, rtx op2, rtx target,
+ int unsignedp);
+extern rtx simplify_expand_binop (enum machine_mode mode, optab binoptab,
+ rtx op0, rtx op1, rtx target, int unsignedp,
+ enum optab_methods methods);
+extern bool force_expand_binop (enum machine_mode, optab, rtx, rtx, rtx, int,
+ enum optab_methods);
+/* Generate code for VEC_RSHIFT_EXPR. */
+extern rtx expand_vec_shift_expr (struct separate_ops *, rtx);
+
+/* Generate code for a simple binary or unary operation. "Simple" in
+ this case means "can be unambiguously described by a (mode, code)
+ pair and mapped to a single optab." */
+extern rtx expand_simple_binop (enum machine_mode, enum rtx_code, rtx,
+ rtx, rtx, int, enum optab_methods);
+
+/* Expand a binary operation given optab and rtx operands. */
+extern rtx expand_binop (enum machine_mode, optab, rtx, rtx, rtx, int,
+ enum optab_methods);
+
+/* Expand a binary operation with both signed and unsigned forms. */
+extern rtx sign_expand_binop (enum machine_mode, optab, optab, rtx, rtx,
+ rtx, int, enum optab_methods);
+
+/* Generate code to perform an operation on one operand with two results. */
+extern int expand_twoval_unop (optab, rtx, rtx, rtx, int);
+
+/* Generate code to perform an operation on two operands with two results. */
+extern int expand_twoval_binop (optab, rtx, rtx, rtx, rtx, int);
+
+/* Generate code to perform an operation on two operands with two
+ results, using a library function. */
+extern bool expand_twoval_binop_libfunc (optab, rtx, rtx, rtx, rtx,
+ enum rtx_code);
+extern rtx expand_simple_unop (enum machine_mode, enum rtx_code, rtx, rtx,
+ int);
+
+/* Expand a unary arithmetic operation given optab rtx operand. */
+extern rtx expand_unop (enum machine_mode, optab, rtx, rtx, int);
+
+/* Expand the absolute value operation. */
+extern rtx expand_abs_nojump (enum machine_mode, rtx, rtx, int);
+extern rtx expand_abs (enum machine_mode, rtx, rtx, int, int);
+
+/* Expand the one's complement absolute value operation. */
+extern rtx expand_one_cmpl_abs_nojump (enum machine_mode, rtx, rtx);
+
+/* Expand the copysign operation. */
+extern rtx expand_copysign (rtx, rtx, rtx);
+/* Generate an instruction with a given INSN_CODE with an output and
+ an input. */
+extern bool maybe_emit_unop_insn (enum insn_code, rtx, rtx, enum rtx_code);
+extern void emit_unop_insn (enum insn_code, rtx, rtx, enum rtx_code);
+
+/* Emit code to make a call to a constant function or a library call. */
+extern void emit_libcall_block (rtx, rtx, rtx, rtx);
+
+/* The various uses that a comparison can have; used by can_compare_p:
+ jumps, conditional moves, store flag operations. */
+enum can_compare_purpose
+{
+ ccp_jump,
+ ccp_cmov,
+ ccp_store_flag
+};
+
+/* Nonzero if a compare of mode MODE can be done straightforwardly
+ (without splitting it into pieces). */
+extern int can_compare_p (enum rtx_code, enum machine_mode,
+ enum can_compare_purpose);
extern rtx prepare_operand (enum insn_code, rtx, int, enum machine_mode,
enum machine_mode, int);
+/* Emit a pair of rtl insns to compare two rtx's and to jump
+ to a label if the comparison is true. */
+extern void emit_cmp_and_jump_insns (rtx, rtx, enum rtx_code, rtx,
+ enum machine_mode, int, rtx, int prob=-1);
+/* Generate code to indirectly jump to a location given in the rtx LOC. */
+extern void emit_indirect_jump (rtx);
+
+#include "insn-config.h"
+
+#ifndef GCC_INSN_CONFIG_H
+#error "insn-config.h must be included before optabs.h"
+#endif
+
+#ifdef HAVE_conditional_move
+/* Emit a conditional move operation. */
+rtx emit_conditional_move (rtx, enum rtx_code, rtx, rtx, enum machine_mode,
+ rtx, rtx, enum machine_mode, int);
+
+/* Return nonzero if the conditional move is supported. */
+int can_conditionally_move_p (enum machine_mode mode);
+
+#endif
+rtx emit_conditional_add (rtx, enum rtx_code, rtx, rtx, enum machine_mode,
+ rtx, rtx, enum machine_mode, int);
+
+/* Create but don't emit one rtl instruction to perform certain operations.
+ Modes must match; operands must meet the operation's predicates.
+ Likewise for subtraction and for just copying. */
+extern rtx gen_add2_insn (rtx, rtx);
+extern rtx gen_add3_insn (rtx, rtx, rtx);
+extern int have_add2_insn (rtx, rtx);
+extern rtx gen_addptr3_insn (rtx, rtx, rtx);
+extern int have_addptr3_insn (rtx, rtx, rtx);
+extern rtx gen_sub2_insn (rtx, rtx);
+extern rtx gen_sub3_insn (rtx, rtx, rtx);
+extern int have_sub2_insn (rtx, rtx);
+
+/* Return the INSN_CODE to use for an extend operation. */
+extern enum insn_code can_extend_p (enum machine_mode, enum machine_mode, int);
+
+/* Generate the body of an insn to extend Y (with mode MFROM)
+ into X (with mode MTO). Do zero-extension if UNSIGNEDP is nonzero. */
+extern rtx gen_extend_insn (rtx, rtx, enum machine_mode,
+ enum machine_mode, int);
+
+/* Return the insn_code for a FLOAT_EXPR. */
+enum insn_code can_float_p (enum machine_mode, enum machine_mode, int);
+
+/* Check whether an operation represented by the code CODE is a
+ convert operation that is supported by the target platform in
+ vector form */
+bool supportable_convert_operation (enum tree_code, tree, tree, tree *,
+ enum tree_code *);
+
+/* Generate code for a FLOAT_EXPR. */
+extern void expand_float (rtx, rtx, int);
+
+/* Generate code for a FIX_EXPR. */
+extern void expand_fix (rtx, rtx, int);
+
+/* Generate code for a FIXED_CONVERT_EXPR. */
+extern void expand_fixed_convert (rtx, rtx, int, int);
+
+/* Generate code for float to integral conversion. */
+extern bool expand_sfix_optab (rtx, rtx, convert_optab);
+
+/* Report whether the machine description contains an insn which can
+ perform the operation described by CODE and MODE. */
+extern int have_insn_for (enum rtx_code, enum machine_mode);
+
extern void gen_int_libfunc (optab, const char *, char, enum machine_mode);
extern void gen_fp_libfunc (optab, const char *, char, enum machine_mode);
extern void gen_fixed_libfunc (optab, const char *, char, enum machine_mode);
@@ -542,7 +470,102 @@
extern void gen_satfractuns_conv_libfunc (convert_optab, const char *,
enum machine_mode,
enum machine_mode);
+
+/* Build a decl for a libfunc named NAME. */
+extern tree build_libfunc_function (const char *);
+
+/* Call this to initialize an optab function entry. */
+extern rtx init_one_libfunc (const char *);
+extern rtx set_user_assembler_libfunc (const char *, const char *);
+
+/* Call this to reset the function entry for one optab. */
+extern void set_optab_libfunc (optab, enum machine_mode, const char *);
+extern void set_conv_libfunc (convert_optab, enum machine_mode,
+ enum machine_mode, const char *);
+
+/* Call this once to initialize the contents of the optabs
+ appropriately for the current target machine. */
+extern void init_optabs (void);
extern void init_tree_optimization_optabs (tree);
+
+/* Call this to install all of the __sync libcalls up to size MAX. */
+extern void init_sync_libfuncs (int max);
+
+/* Generate a conditional trap instruction. */
+extern rtx gen_cond_trap (enum rtx_code, rtx, rtx, rtx);
+
+/* Return true if target supports vector operations for VEC_PERM_EXPR. */
+extern bool can_vec_perm_p (enum machine_mode, bool, const unsigned char *);
+
+/* Generate code for VEC_PERM_EXPR. */
+extern rtx expand_vec_perm (enum machine_mode, rtx, rtx, rtx, rtx);
+
+/* Return tree if target supports vector operations for COND_EXPR. */
+bool expand_vec_cond_expr_p (tree, tree);
+
+/* Generate code for VEC_COND_EXPR. */
+extern rtx expand_vec_cond_expr (tree, tree, tree, tree, rtx);
+
+/* Return non-zero if target supports a given highpart multiplication. */
+extern int can_mult_highpart_p (enum machine_mode, bool);
+
+/* Generate code for MULT_HIGHPART_EXPR. */
+extern rtx expand_mult_highpart (enum machine_mode, rtx, rtx, rtx, bool);
+
+/* Return true if target supports vector masked load/store for mode. */
+extern bool can_vec_mask_load_store_p (enum machine_mode, bool);
+
+/* Return true if there is an inline compare and swap pattern. */
+extern bool can_compare_and_swap_p (enum machine_mode, bool);
+
+/* Return true if there is an inline atomic exchange pattern. */
+extern bool can_atomic_exchange_p (enum machine_mode, bool);
+
+extern rtx expand_sync_lock_test_and_set (rtx, rtx, rtx);
+extern rtx expand_atomic_test_and_set (rtx, rtx, enum memmodel);
+extern rtx expand_atomic_exchange (rtx, rtx, rtx, enum memmodel);
+extern bool expand_atomic_compare_and_swap (rtx *, rtx *, rtx, rtx, rtx, bool,
+ enum memmodel, enum memmodel);
+/* Generate memory barriers. */
+extern void expand_mem_thread_fence (enum memmodel);
+extern void expand_mem_signal_fence (enum memmodel);
+
+rtx expand_atomic_load (rtx, rtx, enum memmodel);
+rtx expand_atomic_store (rtx, rtx, enum memmodel, bool);
+rtx expand_atomic_fetch_op (rtx, rtx, rtx, enum rtx_code, enum memmodel,
+ bool);
+
+extern bool insn_operand_matches (enum insn_code icode, unsigned int opno,
+ rtx operand);
+extern bool valid_multiword_target_p (rtx);
+extern void create_convert_operand_from_type (struct expand_operand *op,
+ rtx value, tree type);
+extern bool maybe_legitimize_operands (enum insn_code icode,
+ unsigned int opno, unsigned int nops,
+ struct expand_operand *ops);
+extern rtx maybe_gen_insn (enum insn_code icode, unsigned int nops,
+ struct expand_operand *ops);
+extern bool maybe_expand_insn (enum insn_code icode, unsigned int nops,
+ struct expand_operand *ops);
+extern bool maybe_expand_jump_insn (enum insn_code icode, unsigned int nops,
+ struct expand_operand *ops);
+extern void expand_insn (enum insn_code icode, unsigned int nops,
+ struct expand_operand *ops);
+extern void expand_jump_insn (enum insn_code icode, unsigned int nops,
+ struct expand_operand *ops);
+
+/* Enumerates the possible extraction_insn operations. */
+enum extraction_pattern { EP_insv, EP_extv, EP_extzv };
+
+extern bool get_best_reg_extraction_insn (extraction_insn *,
+ enum extraction_pattern,
+ unsigned HOST_WIDE_INT,
+ enum machine_mode);
+extern bool get_best_mem_extraction_insn (extraction_insn *,
+ enum extraction_pattern,
+ HOST_WIDE_INT, HOST_WIDE_INT,
+ enum machine_mode);
+
extern bool lshift_cheap_p (bool);
#endif /* GCC_OPTABS_H */
Index: genopinit.c
===================================================================
--- genopinit.c (revision 216804)
+++ genopinit.c (working copy)
@@ -398,6 +398,68 @@
fprintf (h_file, "#define NUM_OPTAB_PATTERNS %u\n",
(unsigned) patterns.length ());
+ fprintf (h_file,
+ "typedef enum optab_tag optab;\n"
+ "typedef enum optab_tag convert_optab;\n"
+ "typedef enum optab_tag direct_optab;\n"
+ "\n"
+ "struct optab_libcall_d\n"
+ "{\n"
+ " char libcall_suffix;\n"
+ " const char *libcall_basename;\n"
+ " void (*libcall_gen) (optab, const char *name,\n"
+ " char suffix, enum machine_mode);\n"
+ "};\n"
+ "\n"
+ "struct convert_optab_libcall_d\n"
+ "{\n"
+ " const char *libcall_basename;\n"
+ " void (*libcall_gen) (convert_optab, const char *name,\n"
+ " enum machine_mode, enum machine_mode);\n"
+ "};\n"
+ "\n"
+ "/* Given an enum insn_code, access the function to construct\n"
+ " the body of that kind of insn. */\n"
+ "#define GEN_FCN(CODE) (insn_data[CODE].genfun)\n"
+ "\n"
+ "/* Contains the optab used for each rtx code, and vice-versa. */\n"
+ "extern const optab code_to_optab_[NUM_RTX_CODE];\n"
+ "extern const enum rtx_code optab_to_code_[NUM_OPTABS];\n"
+ "\n"
+ "static inline optab\n"
+ "code_to_optab (enum rtx_code code)\n"
+ "{\n"
+ " return code_to_optab_[code];\n"
+ "}\n"
+ "\n"
+ "static inline enum rtx_code\n"
+ "optab_to_code (optab op)\n"
+ "{\n"
+ " return optab_to_code_[op];\n"
+ "}\n"
+ "\n"
+ "extern const struct convert_optab_libcall_d convlib_def[NUM_CONVLIB_OPTABS];\n"
+ "extern const struct optab_libcall_d normlib_def[NUM_NORMLIB_OPTABS];\n"
+ "\n"
+ "/* Returns the active icode for the given (encoded) optab. */\n"
+ "extern enum insn_code raw_optab_handler (unsigned);\n"
+ "extern bool swap_optab_enable (optab, enum machine_mode, bool);\n"
+ "\n"
+ "/* Target-dependent globals. */\n"
+ "struct target_optabs {\n"
+ " /* Patterns that are used by optabs that are enabled for this target. */\n"
+ " bool pat_enable[NUM_OPTAB_PATTERNS];\n"
+ "};\n"
+ "extern void init_all_optabs (struct target_optabs *);\n"
+ "\n"
+ "extern struct target_optabs default_target_optabs;\n"
+ "extern struct target_optabs *this_fn_optabs;\n"
+ "#if SWITCHABLE_TARGET\n"
+ "extern struct target_optabs *this_target_optabs;\n"
+ "#else\n"
+ "#define this_target_optabs (&default_target_optabs)\n"
+ "#endif\n");
+
fprintf (s_file,
"#include \"config.h\"\n"
"#include \"system.h\"\n"
@@ -413,6 +475,7 @@
"#include \"flags.h\"\n"
"#include \"insn-config.h\"\n"
"#include \"expr.h\"\n"
+ "#include \"insn-codes.h\"\n"
"#include \"optabs.h\"\n"
"\n"
"struct optab_pat {\n"
Index: optabs.c
===================================================================
--- optabs.c (revision 216804)
+++ optabs.c (working copy)
@@ -44,6 +44,7 @@
#include "function.h"
#include "except.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "recog.h"
@@ -4894,21 +4895,6 @@
return 1;
}
-
-/* Generate the body of an instruction to copy Y into X.
- It may be a list of insns, if one insn isn't enough. */
-
-rtx
-gen_move_insn (rtx x, rtx y)
-{
- rtx_insn *seq;
-
- start_sequence ();
- emit_move_insn_1 (x, y);
- seq = get_insns ();
- end_sequence ();
- return seq;
-}
/* Return the insn code used to extend FROM_MODE to TO_MODE.
UNSIGNEDP specifies zero-extension instead of sign-extension. If
Index: expr.h
===================================================================
--- expr.h (revision 216804)
+++ expr.h (working copy)
@@ -37,6 +37,7 @@
ssize_int, TREE_CODE, TYPE_SIZE, int_size_in_bytes, */
#include "tree-core.h"
/* For GET_MODE_BITSIZE, word_mode */
+#include "insn-config.h"
/* This is the 4th arg to `expand_expr'.
EXPAND_STACK_PARM means we are possibly expanding a call param onto
@@ -72,93 +73,6 @@
tree op0, op1, op2;
} *sepops;
-/* Functions from optabs.c, commonly used, and without need for the optabs
- tables: */
-
-/* Passed to expand_simple_binop and expand_binop to say which options
- to try to use if the requested operation can't be open-coded on the
- requisite mode. Either OPTAB_LIB or OPTAB_LIB_WIDEN says try using
- a library call. Either OPTAB_WIDEN or OPTAB_LIB_WIDEN says try
- using a wider mode. OPTAB_MUST_WIDEN says try widening and don't
- try anything else. */
-
-enum optab_methods
-{
- OPTAB_DIRECT,
- OPTAB_LIB,
- OPTAB_WIDEN,
- OPTAB_LIB_WIDEN,
- OPTAB_MUST_WIDEN
-};
-
-/* Generate code for a simple binary or unary operation. "Simple" in
- this case means "can be unambiguously described by a (mode, code)
- pair and mapped to a single optab." */
-extern rtx expand_simple_binop (enum machine_mode, enum rtx_code, rtx,
- rtx, rtx, int, enum optab_methods);
-extern rtx expand_simple_unop (enum machine_mode, enum rtx_code, rtx, rtx,
- int);
-
-/* Report whether the machine description contains an insn which can
- perform the operation described by CODE and MODE. */
-extern int have_insn_for (enum rtx_code, enum machine_mode);
-
-/* Emit code to make a call to a constant function or a library call. */
-extern void emit_libcall_block (rtx, rtx, rtx, rtx);
-
-/* Create but don't emit one rtl instruction to perform certain operations.
- Modes must match; operands must meet the operation's predicates.
- Likewise for subtraction and for just copying. */
-extern rtx gen_add2_insn (rtx, rtx);
-extern rtx gen_add3_insn (rtx, rtx, rtx);
-extern rtx gen_addptr3_insn (rtx, rtx, rtx);
-extern rtx gen_sub2_insn (rtx, rtx);
-extern rtx gen_sub3_insn (rtx, rtx, rtx);
-extern rtx gen_move_insn (rtx, rtx);
-extern int have_add2_insn (rtx, rtx);
-extern int have_addptr3_insn (rtx, rtx, rtx);
-extern int have_sub2_insn (rtx, rtx);
-
-/* Emit a pair of rtl insns to compare two rtx's and to jump
- to a label if the comparison is true. */
-extern void emit_cmp_and_jump_insns (rtx, rtx, enum rtx_code, rtx,
- enum machine_mode, int, rtx, int prob=-1);
-
-/* Generate code to indirectly jump to a location given in the rtx LOC. */
-extern void emit_indirect_jump (rtx);
-
-/* Generate a conditional trap instruction. */
-extern rtx gen_cond_trap (enum rtx_code, rtx, rtx, rtx);
-
-#include "insn-config.h"
-
-#ifdef HAVE_conditional_move
-/* Emit a conditional move operation. */
-rtx emit_conditional_move (rtx, enum rtx_code, rtx, rtx, enum machine_mode,
- rtx, rtx, enum machine_mode, int);
-
-/* Return nonzero if the conditional move is supported. */
-int can_conditionally_move_p (enum machine_mode mode);
-
-#endif
-rtx emit_conditional_add (rtx, enum rtx_code, rtx, rtx, enum machine_mode,
- rtx, rtx, enum machine_mode, int);
-
-rtx expand_sync_operation (rtx, rtx, enum rtx_code);
-rtx expand_sync_fetch_operation (rtx, rtx, enum rtx_code, bool, rtx);
-rtx expand_sync_lock_test_and_set (rtx, rtx, rtx);
-
-rtx expand_atomic_exchange (rtx, rtx, rtx, enum memmodel);
-rtx expand_atomic_load (rtx, rtx, enum memmodel);
-rtx expand_atomic_store (rtx, rtx, enum memmodel, bool);
-rtx expand_atomic_fetch_op (rtx, rtx, rtx, enum rtx_code, enum memmodel,
- bool);
-rtx expand_atomic_test_and_set (rtx, rtx, enum memmodel);
-rtx expand_atomic_clear (rtx, enum memmodel);
-void expand_atomic_thread_fence (enum memmodel);
-void expand_atomic_signal_fence (enum memmodel);
-
-
/* Functions from expmed.c: */
/* Arguments MODE, RTX: return an rtx for the negation of that value.
@@ -334,6 +248,7 @@
/* Emit insns to set X from Y. */
extern rtx_insn *emit_move_insn (rtx, rtx);
+extern rtx gen_move_insn (rtx, rtx);
/* Emit insns to set X from Y, with no frills. */
extern rtx_insn *emit_move_insn_1 (rtx, rtx);
@@ -671,18 +586,6 @@
extern bool split_comparison (enum rtx_code, enum machine_mode,
enum rtx_code *, enum rtx_code *);
-/* Call this once to initialize the contents of the optabs
- appropriately for the current target machine. */
-extern void init_optabs (void);
-extern void init_all_optabs (struct target_optabs *);
-
-/* Call this to initialize an optab function entry. */
-extern rtx init_one_libfunc (const char *);
-extern rtx set_user_assembler_libfunc (const char *, const char *);
-
-/* Build a decl for a libfunc named NAME. */
-extern tree build_libfunc_function (const char *);
-
/* Get the personality libfunc for a function decl. */
rtx get_personality_function (tree);
Index: expr.c
===================================================================
--- expr.c (revision 216805)
+++ expr.c (working copy)
@@ -41,6 +41,7 @@
#include "insn-attr.h"
/* Include expr.h after insn-config.h so we get HAVE_conditional_move. */
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "recog.h"
@@ -3657,6 +3658,21 @@
return last_insn;
}
+/* Generate the body of an instruction to copy Y into X.
+ It may be a list of insns, if one insn isn't enough. */
+
+rtx
+gen_move_insn (rtx x, rtx y)
+{
+ rtx_insn *seq;
+
+ start_sequence ();
+ emit_move_insn_1 (x, y);
+ seq = get_insns ();
+ end_sequence ();
+ return seq;
+}
+
/* If Y is representable exactly in a narrower mode, and the target can
perform the extension directly from constant or memory, then emit the
move as an extension. */
Index: genemit.c
===================================================================
--- genemit.c (revision 216804)
+++ genemit.c (working copy)
@@ -809,6 +809,7 @@
printf ("#include \"input.h\"\n");
printf ("#include \"function.h\"\n");
printf ("#include \"expr.h\"\n");
+ printf ("#include \"insn-codes.h\"\n");
printf ("#include \"optabs.h\"\n");
printf ("#include \"dfp.h\"\n");
printf ("#include \"flags.h\"\n");
Index: gengtype.c
===================================================================
--- gengtype.c (revision 216805)
+++ gengtype.c (working copy)
@@ -1826,7 +1826,7 @@
{
/* The order of files here matters very much. */
static const char *const ifiles[] = {
- "config.h", "system.h", "coretypes.h", "tm.h",
+ "config.h", "system.h", "coretypes.h", "tm.h", "insn-codes.h",
"hashtab.h", "splay-tree.h", "obstack.h", "bitmap.h", "input.h",
"tree.h", "rtl.h", "wide-int.h", "hashtab.h", "hash-set.h", "vec.h",
"machmode.h", "tm.h", "hard-reg-set.h", "input.h", "predict.h",
* asan.c: Include insn-codes.h.
* bb-reorder.c: Ditto.
* builtins.c: Ditto.
* calls.c: Ditto.
* cfgexpand.c: Ditto.
* cilk-common.c: Ditto.
* combine.c: Ditto.
* dojump.c: Ditto.
* dse.c: Ditto.
* explow.c: Ditto.
* expmed.c: Ditto.
* function.c: Ditto.
* ifcvt.c: Ditto.
* internal-fn.c: Ditto.
* loop-unroll.c: Ditto.
* lra.c: Ditto.
* modulo-sched.c: Ditto.
* omp-low.c: Ditto.
* postreload.c: Ditto.
* ree.c: Ditto.
* reload.c: Ditto.
* reload1.c: Ditto.
* shrink-wrap.c: Ditto.
* simplify-rtx.c: Ditto.
* stmt.c: Ditto.
* target-globals.c: Ditto.
* targhooks.c: Ditto.
* toplev.c: Ditto.
* tree-if-conv.c: Ditto.
* tree-ssa-forwprop.c: Ditto.
* tree-ssa-loop-prefetch.c: Ditto.
* tree-ssa-math-opts.c: Ditto.
* tree-ssa-phiopt.c: Ditto.
* tree-ssa-reassoc.c: Ditto.
* tree-switch-conversion.c: Ditto.
* tree-vect-data-refs.c: Ditto.
* tree-vect-generic.c: Ditto.
* tree-vect-loop.c: Ditto.
* tree-vect-patterns.c: Ditto.
* tree-vect-slp.c: Ditto.
* tree-vect-stmts.c: Ditto.
* tree-vrp.c: Ditto.
* value-prof.c: Ditto.
* config/aarch64/aarch64-builtins.c: Ditto.
* config/alpha/alpha.c: Ditto.
* config/arm/arm.c: Ditto.
* config/cris/cris.c: Ditto.
* config/frv/frv.c: Ditto.
* config/h8300/h8300.c: Ditto.
* config/ia64/ia64.c: Ditto.
* config/iq2000/iq2000.c: Ditto.
* config/m32c/m32c.c: Ditto.
* config/mep/mep.c: Ditto.
* config/microblaze/microblaze.c: Ditto.
* config/mips/mips.c: Ditto.
* config/mn10300/mn10300.c: Ditto.
* config/moxie/moxie.c: Ditto.
* config/msp430/msp430.c: Ditto.
* config/nios2/nios2.c: Ditto.
* config/pa/pa.c: Ditto.
* config/rl78/rl78.c: Ditto.
* config/rs6000/rs6000.c: Ditto.
* config/rx/rx.c: Ditto.
* config/s390/s390.c: Ditto.
* config/sh/sh.c: Ditto.
* config/spu/spu.c: Ditto.
* config/stormy16/stormy16.c: Ditto.
* config/tilegx/mul-tables.c: Ditto.
* config/tilegx/tilegx.c: Ditto.
* config/tilepro/mul-tables.c: Ditto.
* config/tilepro/tilepro.c: Ditto.
* config/vax/vax.c: Ditto.
Index: asan.c
===================================================================
--- asan.c (revision 216805)
+++ asan.c (working copy)
@@ -60,6 +60,7 @@
#include "gimple-pretty-print.h"
#include "target.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "output.h"
#include "tm_p.h"
Index: bb-reorder.c
===================================================================
--- bb-reorder.c (revision 216805)
+++ bb-reorder.c (working copy)
@@ -99,6 +99,7 @@
#include "tm_p.h"
#include "obstack.h"
#include "expr.h"
+#include "optabs.h"
#include "params.h"
#include "diagnostic-core.h"
#include "toplev.h" /* user_defined_section_attribute */
Index: builtins.c
===================================================================
--- builtins.c (revision 216804)
+++ builtins.c (working copy)
@@ -49,6 +49,7 @@
#include "except.h"
#include "insn-config.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "recog.h"
Index: calls.c
===================================================================
--- calls.c (revision 216805)
+++ calls.c (working copy)
@@ -43,6 +43,7 @@
#include "gimple.h"
#include "flags.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "regs.h"
Index: cfgexpand.c
===================================================================
--- cfgexpand.c (revision 216805)
+++ cfgexpand.c (working copy)
@@ -44,6 +44,8 @@
#include "cfgbuild.h"
#include "cfgcleanup.h"
#include "basic-block.h"
+#include "insn-codes.h"
+#include "optabs.h"
#include "expr.h"
#include "langhooks.h"
#include "bitmap.h"
Index: cilk-common.c
===================================================================
--- cilk-common.c (revision 216804)
+++ cilk-common.c (working copy)
@@ -28,6 +28,7 @@
#include "stor-layout.h"
#include "langhooks.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "recog.h"
#include "tree-iterator.h"
Index: combine.c
===================================================================
--- combine.c (revision 216805)
+++ combine.c (working copy)
@@ -105,8 +105,8 @@
#include "recog.h"
#include "diagnostic-core.h"
#include "target.h"
+#include "insn-codes.h"
#include "optabs.h"
-#include "insn-codes.h"
#include "rtlhooks-def.h"
#include "params.h"
#include "tree-pass.h"
Index: config/aarch64/aarch64-builtins.c
===================================================================
--- config/aarch64/aarch64-builtins.c (revision 216804)
+++ config/aarch64/aarch64-builtins.c (working copy)
@@ -32,6 +32,7 @@
#include "recog.h"
#include "langhooks.h"
#include "diagnostic-core.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "hash-table.h"
#include "vec.h"
Index: config/alpha/alpha.c
===================================================================
--- config/alpha/alpha.c (revision 216804)
+++ config/alpha/alpha.c (working copy)
@@ -37,6 +37,7 @@
#include "flags.h"
#include "recog.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "reload.h"
#include "obstack.h"
Index: config/arm/arm.c
===================================================================
--- config/arm/arm.c (revision 216805)
+++ config/arm/arm.c (working copy)
@@ -47,6 +47,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "diagnostic-core.h"
#include "recog.h"
Index: config/cris/cris.c
===================================================================
--- config/cris/cris.c (revision 216805)
+++ config/cris/cris.c (working copy)
@@ -52,6 +52,7 @@
#include "target.h"
#include "target-def.h"
#include "ggc.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "dominance.h"
#include "cfg.h"
Index: config/frv/frv.c
===================================================================
--- config/frv/frv.c (revision 216804)
+++ config/frv/frv.c (working copy)
@@ -45,6 +45,7 @@
#include "machmode.h"
#include "input.h"
#include "function.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "diagnostic-core.h"
#include "predict.h"
Index: config/h8300/h8300.c
===================================================================
--- config/h8300/h8300.c (revision 216804)
+++ config/h8300/h8300.c (working copy)
@@ -44,6 +44,7 @@
#include "machmode.h"
#include "input.h"
#include "function.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "diagnostic-core.h"
#include "c-family/c-pragma.h" /* ??? */
Index: config/ia64/ia64.c
===================================================================
--- config/ia64/ia64.c (revision 216804)
+++ config/ia64/ia64.c (working copy)
@@ -38,6 +38,7 @@
#include "flags.h"
#include "recog.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "except.h"
#include "hashtab.h"
Index: config/iq2000/iq2000.c
===================================================================
--- config/iq2000/iq2000.c (revision 216804)
+++ config/iq2000/iq2000.c (working copy)
@@ -40,6 +40,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "recog.h"
Index: config/m32c/m32c.c
===================================================================
--- config/m32c/m32c.c (revision 216804)
+++ config/m32c/m32c.c (working copy)
@@ -40,6 +40,7 @@
#include "varasm.h"
#include "calls.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "except.h"
#include "hashtab.h"
Index: config/mep/mep.c
===================================================================
--- config/mep/mep.c (revision 216804)
+++ config/mep/mep.c (working copy)
@@ -47,6 +47,7 @@
#include "machmode.h"
#include "input.h"
#include "function.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "reload.h"
#include "tm_p.h"
Index: config/microblaze/microblaze.c
===================================================================
--- config/microblaze/microblaze.c (revision 216805)
+++ config/microblaze/microblaze.c (working copy)
@@ -61,6 +61,7 @@
#include "predict.h"
#include "basic-block.h"
#include "df.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "diagnostic-core.h"
#include "hash-map.h"
Index: config/mips/mips.c
===================================================================
--- config/mips/mips.c (revision 216805)
+++ config/mips/mips.c (working copy)
@@ -45,6 +45,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "flags.h"
Index: config/mn10300/mn10300.c
===================================================================
--- config/mn10300/mn10300.c (revision 216804)
+++ config/mn10300/mn10300.c (working copy)
@@ -37,6 +37,7 @@
#include "recog.h"
#include "reload.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "hashtab.h"
#include "hash-set.h"
Index: config/moxie/moxie.c
===================================================================
--- config/moxie/moxie.c (revision 216804)
+++ config/moxie/moxie.c (working copy)
@@ -40,6 +40,7 @@
#include "varasm.h"
#include "calls.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "except.h"
#include "hashtab.h"
Index: config/msp430/msp430.c
===================================================================
--- config/msp430/msp430.c (revision 216804)
+++ config/msp430/msp430.c (working copy)
@@ -40,6 +40,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "recog.h"
Index: config/nios2/nios2.c
===================================================================
--- config/nios2/nios2.c (revision 216804)
+++ config/nios2/nios2.c (working copy)
@@ -35,6 +35,7 @@
#include "flags.h"
#include "recog.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "hashtab.h"
#include "hash-set.h"
Index: config/pa/pa.c
===================================================================
--- config/pa/pa.c (revision 216804)
+++ config/pa/pa.c (working copy)
@@ -38,6 +38,7 @@
#include "dbxout.h"
#include "except.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "reload.h"
#include "hashtab.h"
Index: config/rl78/rl78.c
===================================================================
--- config/rl78/rl78.c (revision 216804)
+++ config/rl78/rl78.c (working copy)
@@ -41,6 +41,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "recog.h"
Index: config/rs6000/rs6000.c
===================================================================
--- config/rs6000/rs6000.c (revision 216805)
+++ config/rs6000/rs6000.c (working copy)
@@ -38,6 +38,7 @@
#include "print-tree.h"
#include "varasm.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "except.h"
#include "hashtab.h"
Index: config/rx/rx.c
===================================================================
--- config/rx/rx.c (revision 216805)
+++ config/rx/rx.c (working copy)
@@ -45,6 +45,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "recog.h"
Index: config/s390/s390.c
===================================================================
--- config/s390/s390.c (revision 216804)
+++ config/s390/s390.c (working copy)
@@ -64,6 +64,7 @@
#include "target-def.h"
#include "debug.h"
#include "langhooks.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "hash-table.h"
#include "tree-ssa-alias.h"
Index: config/sh/sh.c
===================================================================
--- config/sh/sh.c (revision 216804)
+++ config/sh/sh.c (working copy)
@@ -36,6 +36,7 @@
#include "varasm.h"
#include "flags.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "reload.h"
#include "hashtab.h"
Index: config/spu/spu.c
===================================================================
--- config/spu/spu.c (revision 216804)
+++ config/spu/spu.c (working copy)
@@ -33,6 +33,7 @@
#include "calls.h"
#include "varasm.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "except.h"
#include "hashtab.h"
Index: config/stormy16/stormy16.c
===================================================================
--- config/stormy16/stormy16.c (revision 216804)
+++ config/stormy16/stormy16.c (working copy)
@@ -40,6 +40,7 @@
#include "varasm.h"
#include "calls.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "except.h"
#include "hashtab.h"
Index: config/tilegx/mul-tables.c
===================================================================
--- config/tilegx/mul-tables.c (revision 216804)
+++ config/tilegx/mul-tables.c (working copy)
@@ -22,6 +22,7 @@
#include "system.h"
#include "coretypes.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "tilegx-multiply.h"
Index: config/tilegx/tilegx.c
===================================================================
--- config/tilegx/tilegx.c (revision 216804)
+++ config/tilegx/tilegx.c (working copy)
@@ -30,6 +30,7 @@
#include "recog.h"
#include "expr.h"
#include "langhooks.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "dominance.h"
#include "cfg.h"
Index: config/tilepro/mul-tables.c
===================================================================
--- config/tilepro/mul-tables.c (revision 216804)
+++ config/tilepro/mul-tables.c (working copy)
@@ -22,6 +22,7 @@
#include "system.h"
#include "coretypes.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "tilepro-multiply.h"
Index: config/tilepro/tilepro.c
===================================================================
--- config/tilepro/tilepro.c (revision 216804)
+++ config/tilepro/tilepro.c (working copy)
@@ -30,6 +30,7 @@
#include "recog.h"
#include "expr.h"
#include "langhooks.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "dominance.h"
#include "cfg.h"
Index: config/vax/vax.c
===================================================================
--- config/vax/vax.c (revision 216804)
+++ config/vax/vax.c (working copy)
@@ -49,6 +49,7 @@
#include "insn-attr.h"
#include "recog.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "flags.h"
#include "debug.h"
Index: dojump.c
===================================================================
--- dojump.c (revision 216804)
+++ dojump.c (working copy)
@@ -36,6 +36,7 @@
#include "insn-attr.h"
/* Include expr.h after insn-config.h so we get HAVE_conditional_move. */
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "langhooks.h"
#include "ggc.h"
Index: dse.c
===================================================================
--- dse.c (revision 216804)
+++ dse.c (working copy)
@@ -48,6 +48,7 @@
#include "insn-config.h"
#include "expr.h"
#include "recog.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "dbgcnt.h"
#include "target.h"
Index: explow.c
===================================================================
--- explow.c (revision 216804)
+++ explow.c (working copy)
@@ -37,6 +37,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "insn-config.h"
Index: expmed.c
===================================================================
--- expmed.c (revision 216804)
+++ expmed.c (working copy)
@@ -31,6 +31,7 @@
#include "flags.h"
#include "insn-config.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "recog.h"
#include "langhooks.h"
Index: function.c
===================================================================
--- function.c (revision 216804)
+++ function.c (working copy)
@@ -50,6 +50,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "regs.h"
Index: ifcvt.c
===================================================================
--- ifcvt.c (revision 216804)
+++ ifcvt.c (working copy)
@@ -44,6 +44,7 @@
#include "basic-block.h"
#include "expr.h"
#include "output.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "diagnostic-core.h"
#include "tm_p.h"
Index: internal-fn.c
===================================================================
--- internal-fn.c (revision 216804)
+++ internal-fn.c (working copy)
@@ -24,6 +24,7 @@
#include "internal-fn.h"
#include "stor-layout.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "predict.h"
#include "vec.h"
Index: loop-unroll.c
===================================================================
--- loop-unroll.c (revision 216804)
+++ loop-unroll.c (working copy)
@@ -39,6 +39,8 @@
#include "basic-block.h"
#include "cfgloop.h"
#include "params.h"
+#include "insn-codes.h"
+#include "optabs.h"
#include "expr.h"
#include "hash-table.h"
#include "recog.h"
Index: lra.c
===================================================================
--- lra.c (revision 216804)
+++ lra.c (working copy)
@@ -112,6 +112,8 @@
#include "machmode.h"
#include "input.h"
#include "function.h"
+#include "tree-core.h"
+#include "optabs.h"
#include "expr.h"
#include "predict.h"
#include "dominance.h"
Index: modulo-sched.c
===================================================================
--- modulo-sched.c (revision 216804)
+++ modulo-sched.c (working copy)
@@ -48,6 +48,9 @@
#include "sched-int.h"
#include "target.h"
#include "cfgloop.h"
+#include "tree-core.h"
+#include "insn-codes.h"
+#include "optabs.h"
#include "expr.h"
#include "params.h"
#include "gcov-io.h"
Index: omp-low.c
===================================================================
--- omp-low.c (revision 216805)
+++ omp-low.c (working copy)
@@ -73,6 +73,7 @@
#include "tree-pass.h"
#include "except.h"
#include "splay-tree.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "cfgloop.h"
#include "target.h"
Index: postreload.c
===================================================================
--- postreload.c (revision 216804)
+++ postreload.c (working copy)
@@ -35,6 +35,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "regs.h"
#include "predict.h"
Index: ree.c
===================================================================
--- ree.c (revision 216805)
+++ ree.c (working copy)
@@ -242,8 +242,8 @@
#include "recog.h"
#include "diagnostic-core.h"
#include "target.h"
+#include "insn-codes.h"
#include "optabs.h"
-#include "insn-codes.h"
#include "rtlhooks-def.h"
#include "params.h"
#include "tree-pass.h"
Index: reload.c
===================================================================
--- reload.c (revision 216804)
+++ reload.c (working copy)
@@ -96,6 +96,7 @@
#include "tm_p.h"
#include "insn-config.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "recog.h"
#include "dominance.h"
Index: reload1.c
===================================================================
--- reload1.c (revision 216804)
+++ reload1.c (working copy)
@@ -36,6 +36,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "regs.h"
#include "addresses.h"
Index: shrink-wrap.c
===================================================================
--- shrink-wrap.c (revision 216804)
+++ shrink-wrap.c (working copy)
@@ -38,6 +38,7 @@
#include "input.h"
#include "function.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "regs.h"
Index: simplify-rtx.c
===================================================================
--- simplify-rtx.c (revision 216804)
+++ simplify-rtx.c (working copy)
@@ -37,6 +37,8 @@
#include "machmode.h"
#include "input.h"
#include "function.h"
+#include "insn-codes.h"
+#include "optabs.h"
#include "expr.h"
#include "diagnostic-core.h"
#include "ggc.h"
Index: stmt.c
===================================================================
--- stmt.c (revision 216804)
+++ stmt.c (working copy)
@@ -49,6 +49,7 @@
#include "output.h"
#include "langhooks.h"
#include "predict.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "target.h"
#include "cfganal.h"
Index: target-globals.c
===================================================================
--- target-globals.c (revision 216804)
+++ target-globals.c (working copy)
@@ -34,6 +34,7 @@
#include "reload.h"
#include "expmed.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "libfuncs.h"
#include "cfgloop.h"
Index: targhooks.c
===================================================================
--- targhooks.c (revision 216804)
+++ targhooks.c (working copy)
@@ -69,6 +69,7 @@
#include "target-def.h"
#include "regs.h"
#include "reload.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "recog.h"
#include "intl.h"
@@ -78,7 +79,6 @@
#include "gimplify.h"
#include "stringpool.h"
#include "tree-ssanames.h"
-#include "insn-codes.h"
bool
Index: toplev.c
===================================================================
--- toplev.c (revision 216805)
+++ toplev.c (working copy)
@@ -95,6 +95,7 @@
#include "ipa-reference.h"
#include "ipa-prop.h"
#include "gcse.h"
+#include "insn-codes.h"
#include "optabs.h"
#if defined(DBX_DEBUGGING_INFO) || defined(XCOFF_DEBUGGING_INFO)
Index: tree-if-conv.c
===================================================================
--- tree-if-conv.c (revision 216804)
+++ tree-if-conv.c (working copy)
@@ -125,6 +125,7 @@
#include "tree-pass.h"
#include "dbgcnt.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
/* List of basic blocks in if-conversion-suitable order. */
Index: tree-ssa-forwprop.c
===================================================================
--- tree-ssa-forwprop.c (revision 216804)
+++ tree-ssa-forwprop.c (working copy)
@@ -60,6 +60,7 @@
#include "diagnostic.h"
#include "expr.h"
#include "cfgloop.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "tree-ssa-propagate.h"
#include "tree-ssa-dom.h"
Index: tree-ssa-loop-prefetch.c
===================================================================
--- tree-ssa-loop-prefetch.c (revision 216804)
+++ tree-ssa-loop-prefetch.c (working copy)
@@ -65,6 +65,7 @@
/* FIXME: Needed for optabs, but this should all be moved to a TBD interface
between the GIMPLE and RTL worlds. */
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "recog.h"
Index: tree-ssa-math-opts.c
===================================================================
--- tree-ssa-math-opts.c (revision 216804)
+++ tree-ssa-math-opts.c (working copy)
@@ -129,6 +129,7 @@
/* FIXME: RTL headers have to be included here for optabs. */
#include "rtl.h" /* Because optabs.h wants enum rtx_code. */
#include "expr.h" /* Because optabs.h wants sepops. */
+#include "insn-codes.h"
#include "optabs.h"
/* This structure represents one basic block that either computes a
Index: tree-ssa-phiopt.c
===================================================================
--- tree-ssa-phiopt.c (revision 216804)
+++ tree-ssa-phiopt.c (working copy)
@@ -62,6 +62,7 @@
#include "gimple-pretty-print.h"
#include "insn-config.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "tree-scalar-evolution.h"
#include "tree-inline.h"
Index: tree-ssa-reassoc.c
===================================================================
--- tree-ssa-reassoc.c (revision 216804)
+++ tree-ssa-reassoc.c (working copy)
@@ -73,6 +73,7 @@
#include "diagnostic-core.h"
#include "builtins.h"
#include "gimplify.h"
+#include "insn-codes.h"
#include "optabs.h"
/* This is a simple global reassociation pass. It is, in part, based
Index: tree-switch-conversion.c
===================================================================
--- tree-switch-conversion.c (revision 216805)
+++ tree-switch-conversion.c (working copy)
@@ -71,6 +71,7 @@
/* Need to include expr.h and optabs.h for lshift_cheap_p. */
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
/* Maximum number of case bit tests.
Index: tree-vect-data-refs.c
===================================================================
--- tree-vect-data-refs.c (revision 216805)
+++ tree-vect-data-refs.c (working copy)
@@ -69,6 +69,7 @@
#include "cgraph.h"
/* Need to include rtl.h, expr.h, etc. for optabs. */
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "builtins.h"
#include "varasm.h"
Index: tree-vect-generic.c
===================================================================
--- tree-vect-generic.c (revision 216804)
+++ tree-vect-generic.c (working copy)
@@ -55,6 +55,7 @@
/* Need to include rtl.h, expr.h, etc. for optabs. */
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
Index: tree-vect-loop.c
===================================================================
--- tree-vect-loop.c (revision 216804)
+++ tree-vect-loop.c (working copy)
@@ -59,6 +59,7 @@
#include "cfgloop.h"
#include "expr.h"
#include "recog.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "params.h"
#include "diagnostic-core.h"
Index: tree-vect-patterns.c
===================================================================
--- tree-vect-patterns.c (revision 216804)
+++ tree-vect-patterns.c (working copy)
@@ -51,6 +51,7 @@
#include "tree-ssanames.h"
#include "cfgloop.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "params.h"
#include "tree-data-ref.h"
Index: tree-vect-slp.c
===================================================================
--- tree-vect-slp.c (revision 216804)
+++ tree-vect-slp.c (working copy)
@@ -52,6 +52,7 @@
#include "cfgloop.h"
#include "expr.h"
#include "recog.h" /* FIXME: for insn_data */
+#include "insn-codes.h"
#include "optabs.h"
#include "tree-vectorizer.h"
#include "langhooks.h"
Index: tree-vect-stmts.c
===================================================================
--- tree-vect-stmts.c (revision 216805)
+++ tree-vect-stmts.c (working copy)
@@ -60,6 +60,7 @@
#include "tree-scalar-evolution.h"
#include "expr.h"
#include "recog.h" /* FIXME: for insn_data */
+#include "insn-codes.h"
#include "optabs.h"
#include "diagnostic-core.h"
#include "tree-vectorizer.h"
Index: tree-vrp.c
===================================================================
--- tree-vrp.c (revision 216804)
+++ tree-vrp.c (working copy)
@@ -69,6 +69,7 @@
#include "tree-chrec.h"
#include "tree-ssa-threadupdate.h"
#include "expr.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "tree-ssa-threadedge.h"
#include "wide-int.h"
Index: value-prof.c
===================================================================
--- value-prof.c (revision 216805)
+++ value-prof.c (working copy)
@@ -41,6 +41,7 @@
#include "flags.h"
#include "insn-config.h"
#include "recog.h"
+#include "insn-codes.h"
#include "optabs.h"
#include "regs.h"
#include "tree-ssa-alias.h"