This is the mail archive of the
gcc-patches@gcc.gnu.org
mailing list for the GCC project.
[PATCH, ia64] [PR target/52731] internal compiler error: in ia64_st_address_bypass_p, at config/ia64/ia64.c:9357
- From: Kirill Yukhin <kirill dot yukhin at gmail dot com>
- To: wilson at tuliptree dot org, sellcey at mips dot com
- Cc: awl at passagen dot se, GCC Patches <gcc-patches at gcc dot gnu dot org>
- Date: Wed, 20 Nov 2013 18:37:20 +0300
- Subject: [PATCH, ia64] [PR target/52731] internal compiler error: in ia64_st_address_bypass_p, at config/ia64/ia64.c:9357
- Authentication-results: sourceware.org; auth=none
Hello,
Patch in the bottom fixes PR52731.
The essense of the problem is that `ia64_single_set'
allows double set as exception for `prologue_allocate_stack'
and `epilogue_deallocate_stack'.
Although it does not apply this exception for predicated
version of the patterns. I introduce explicit predicated
versions of the insns and use their codes in the routine.
Test passes w/ patch applied and fails when not.
Bootstrap pass (for all languages).
ChangeLog entry:
2013-11-20 Kirill Yukhin <kirill.yukhin@intel.com>
* config/ia64/ia64.md (prologue_allocate_stack): Block auto-
generation of predicated version.
(epilogue_deallocate_stack): Ditto.
(prologue_allocate_stack_pr): Add explicit predicated version.
(epilogue_deallocate_stack_pr): Ditto.
testsuite/ChangeLog entry:
2013-11-20 Kirill Yukhin <kirill.yukhin@intel.com>
* gcc.target/ia64/pr52731.c: New.
Is it ok for trunk?
--
Thanks, K
gcc/config/ia64/ia64.c | 2 +
gcc/config/ia64/ia64.md | 41 +++++++++++++++++++++++++++++-
gcc/testsuite/gcc.target/ia64/pr52731.c | 19 ++++++++++++++
3 files changed, 60 insertions(+), 2 deletions(-)
diff --git a/gcc/config/ia64/ia64.c b/gcc/config/ia64/ia64.c
index 4fde7aa..6ce7154 100644
--- a/gcc/config/ia64/ia64.c
+++ b/gcc/config/ia64/ia64.c
@@ -7146,7 +7146,9 @@ ia64_single_set (rtx insn)
switch (recog_memoized (insn))
{
case CODE_FOR_prologue_allocate_stack:
+ case CODE_FOR_prologue_allocate_stack_pr:
case CODE_FOR_epilogue_deallocate_stack:
+ case CODE_FOR_epilogue_deallocate_stack_pr:
ret = XVECEXP (x, 0, 0);
break;
diff --git a/gcc/config/ia64/ia64.md b/gcc/config/ia64/ia64.md
index 4d9d4e0..bc4e8cb 100644
--- a/gcc/config/ia64/ia64.md
+++ b/gcc/config/ia64/ia64.md
@@ -4652,6 +4652,8 @@
;; This prevents the scheduler from moving the SP decrement past FP-relative
;; stack accesses. This is the same as adddi3 plus the extra set.
+;; Explicit predicated version of insn needed to check by CODE_FOR_
+;; in ia64_single_set, where despite of 2 sets this define_insn should be OK.
(define_insn "prologue_allocate_stack"
[(set (match_operand:DI 0 "register_operand" "=r,r,r")
@@ -4664,10 +4666,31 @@
add %0 = %1, %2
adds %0 = %2, %1
addl %0 = %2, %1"
- [(set_attr "itanium_class" "ialu")])
+ [(set_attr "itanium_class" "ialu")
+ (set_attr "predicable" "no")])
+
+(define_insn "prologue_allocate_stack_pr"
+ [(cond_exec (match_operator 0 ("predicate_operator")
+ [(match_operand:BI 1 ("register_operand") ("c,c,c"))
+ (const_int 0)])
+ (parallel
+ [(set (match_operand:DI 2 "register_operand" "=r,r,r")
+ (plus:DI (match_operand:DI 3 "register_operand" "%r,r,a")
+ (match_operand:DI 4 "gr_reg_or_22bit_operand" "r,I,J")))
+ (set (match_operand:DI 5 "register_operand" "+r,r,r")
+ (match_dup 5))]))]
+ ""
+ "@
+ (%J0) add %2 = %3, %4
+ (%J0) adds %2 = %3, %4
+ (%J0) addl %2 = %3, %4"
+ [(set_attr "itanium_class" "ialu")
+ (set_attr "predicable" "no")])
;; This prevents the scheduler from moving the SP restore past FP-relative
;; stack accesses. This is similar to movdi plus the extra set.
+;; Explicit predicated version of insn needed to check by CODE_FOR_
+;; in ia64_single_set, where despite of 2 sets this define_insn should be OK.
(define_insn "epilogue_deallocate_stack"
[(set (match_operand:DI 0 "register_operand" "=r")
@@ -4675,7 +4698,21 @@
(set (match_dup 1) (match_dup 1))]
""
"mov %0 = %1"
- [(set_attr "itanium_class" "ialu")])
+ [(set_attr "itanium_class" "ialu")
+ (set_attr "predicable" "no")])
+
+(define_insn "epilogue_deallocate_stack_pr"
+ [(cond_exec (match_operator 0 ("predicate_operator")
+ [(match_operand:BI 1 ("register_operand") ("c"))
+ (const_int 0)])
+ (parallel
+ [(set (match_operand:DI 2 "register_operand" "=r")
+ (match_operand:DI 3 "register_operand" "+r"))
+ (set (match_dup 3) (match_dup 3))]))]
+ ""
+ "(%J0) mov %2 = %3"
+ [(set_attr "itanium_class" "ialu")
+ (set_attr "predicable" "no")])
;; As USE insns aren't meaningful after reload, this is used instead
;; to prevent deleting instructions setting registers for EH handling
diff --git a/gcc/testsuite/gcc.target/ia64/pr52731.c b/gcc/testsuite/gcc.target/ia64/pr52731.c
new file mode 100644
index 0000000..50ef1d7
--- /dev/null
+++ b/gcc/testsuite/gcc.target/ia64/pr52731.c
@@ -0,0 +1,19 @@
+/* { dg-do compile { target ia64-*-* } } */
+/* { dg-options "-O2" } */
+
+char* area;
+long int area_size;
+char* base;
+
+void fun(unsigned long int addr)
+{
+ unsigned long int size32 = (addr + 4096 - 1) & ~(4096 - 1);
+ unsigned long int size = size32 * sizeof(unsigned int);
+
+ if (size > 0) {
+ size = (size + 1) & ~(1);
+ }
+
+ area_size = size;
+ area = base + size;
+}