This is the mail archive of the gcc-patches@gcc.gnu.org mailing list for the GCC project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Fix use of @item vs. @itemx inside @table


Tested with make info dvi pdf html and checked in as obvious.

Andreas.

	* doc/cppopts.texi: Fix use of @item vs. @itemx inside @table.
	* doc/extend.texi: Likewise.
	* doc/generic.texi: Likewise.
	* doc/invoke.texi: Likewise.
	* doc/md.texi: Likewise.
	* doc/sourcebuild.texi: Likewise.

diff --git a/gcc/doc/cppopts.texi b/gcc/doc/cppopts.texi
index 27b1095..a2eb79d 100644
--- a/gcc/doc/cppopts.texi
+++ b/gcc/doc/cppopts.texi
@@ -1,5 +1,5 @@
 @c Copyright (c) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
-@c 2010, Free Software Foundation, Inc.
+@c 2010, 2012, Free Software Foundation, Inc.
 @c This is part of the CPP and GCC manuals.
 @c For copying conditions, see the file gcc.texi.
 
@@ -805,7 +805,7 @@ Replacement:      [    ]    @{    @}    #    \    ^    |    ~
 Enable special code to work around file systems which only permit very
 short file names, such as MS-DOS@.
 
-@itemx --help
+@item --help
 @itemx --target-help
 @opindex help
 @opindex target-help
diff --git a/gcc/doc/extend.texi b/gcc/doc/extend.texi
index fb1becb..5c4f8fd 100644
--- a/gcc/doc/extend.texi
+++ b/gcc/doc/extend.texi
@@ -1251,10 +1251,10 @@ The @code{__flash} qualifier will locate data in the
 instruction. Pointers to this address space are 16 bits wide.
 
 @item __flash1
-@item __flash2
-@item __flash3
-@item __flash4
-@item __flash5
+@itemx __flash2
+@itemx __flash3
+@itemx __flash4
+@itemx __flash5
 @cindex @code{__flash1} AVR Named Address Spaces
 @cindex @code{__flash2} AVR Named Address Spaces
 @cindex @code{__flash3} AVR Named Address Spaces
diff --git a/gcc/doc/generic.texi b/gcc/doc/generic.texi
index c739731..e878811 100644
--- a/gcc/doc/generic.texi
+++ b/gcc/doc/generic.texi
@@ -1,4 +1,4 @@
-@c Copyright (c) 2004, 2005, 2007, 2008, 2010 Free Software Foundation, Inc.
+@c Copyright (c) 2004, 2005, 2007, 2008, 2010, 2012 Free Software Foundation, Inc.
 @c Free Software Foundation, Inc.
 @c This is part of the GCC manual.
 @c For copying conditions, see the file gcc.texi.
@@ -1417,13 +1417,13 @@ generate these expressions anyhow, if it can tell that strictness does
 not matter.  The type of the operands and that of the result are
 always of @code{BOOLEAN_TYPE} or @code{INTEGER_TYPE}.
 
-@itemx POINTER_PLUS_EXPR
+@item POINTER_PLUS_EXPR
 This node represents pointer arithmetic.  The first operand is always
 a pointer/reference type.  The second operand is always an unsigned
 integer type compatible with sizetype.  This is the only binary
 arithmetic operand that can operate on pointer types.
 
-@itemx PLUS_EXPR
+@item PLUS_EXPR
 @itemx MINUS_EXPR
 @itemx MULT_EXPR
 These nodes represent various binary arithmetic operations.
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index afb9f21..15ecaf1 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -1617,7 +1617,7 @@ GNU dialect of ISO C99.  When ISO C99 is fully implemented in GCC,
 this will become the default.  The name @samp{gnu9x} is deprecated.
 
 @item gnu11
-@item gnu1x
+@itemx gnu1x
 GNU dialect of ISO C11.  Support is incomplete and experimental.  The
 name @samp{gnu1x} is deprecated.
 
@@ -5310,7 +5310,7 @@ is set by this option.
 For example, with @option{-fdbg-cnt=dce:10,tail_call:0},
 @code{dbg_cnt(dce)} returns true only for first 10 invocations.
 
-@itemx -fenable-@var{kind}-@var{pass}
+@item -fenable-@var{kind}-@var{pass}
 @itemx -fdisable-@var{kind}-@var{pass}=@var{range-list}
 @opindex fdisable-
 @opindex fenable-
@@ -5464,11 +5464,11 @@ Dump after duplicating the computed gotos.
 @option{-fdump-rtl-ce3} enable dumping after the three
 if conversion passes.
 
-@itemx -fdump-rtl-cprop_hardreg
+@item -fdump-rtl-cprop_hardreg
 @opindex fdump-rtl-cprop_hardreg
 Dump after hard register copy propagation.
 
-@itemx -fdump-rtl-csa
+@item -fdump-rtl-csa
 @opindex fdump-rtl-csa
 Dump after combining stack adjustments.
 
@@ -5479,11 +5479,11 @@ Dump after combining stack adjustments.
 @option{-fdump-rtl-cse1} and @option{-fdump-rtl-cse2} enable dumping after
 the two common subexpression elimination passes.
 
-@itemx -fdump-rtl-dce
+@item -fdump-rtl-dce
 @opindex fdump-rtl-dce
 Dump after the standalone dead code elimination passes.
 
-@itemx -fdump-rtl-dbr
+@item -fdump-rtl-dbr
 @opindex fdump-rtl-dbr
 Dump after delayed branch scheduling.
 
@@ -5528,7 +5528,7 @@ Dump after the initialization of the registers.
 @opindex fdump-rtl-initvals
 Dump after the computation of the initial value sets.
 
-@itemx -fdump-rtl-into_cfglayout
+@item -fdump-rtl-into_cfglayout
 @opindex fdump-rtl-into_cfglayout
 Dump after converting to cfglayout mode.
 
@@ -5558,7 +5558,7 @@ Dump after removing redundant mode switches.
 @opindex fdump-rtl-rnreg
 Dump after register renumbering.
 
-@itemx -fdump-rtl-outof_cfglayout
+@item -fdump-rtl-outof_cfglayout
 @opindex fdump-rtl-outof_cfglayout
 Dump after converting from cfglayout mode.
 
@@ -10815,10 +10815,10 @@ integer multiply, or integer multiply-and-accumulate.
 The default is @option{-mfp-mode=caller}
 
 @item -mnosplit-lohi
+@itemx -mno-postinc
+@itemx -mno-postmodify
 @opindex mnosplit-lohi
-@item -mno-postinc
 @opindex mno-postinc
-@item -mno-postmodify
 @opindex mno-postmodify
 Code generation tweaks that disable, respectively, splitting of 32-bit
 loads, generation of post-increment addresses, and generation of
@@ -10901,7 +10901,7 @@ statically linked only.
 Do not assume that unaligned memory references will be handled by the system.
 
 @item -momit-leaf-frame-pointer
-@item -mno-omit-leaf-frame-pointer
+@itemx -mno-omit-leaf-frame-pointer
 @opindex momit-leaf-frame-pointer
 @opindex mno-omit-leaf-frame-pointer
 Omit or keep the frame pointer in leaf functions.  The former behaviour is the
@@ -11739,7 +11739,7 @@ This is the case for devices with at least 16@tie{}KiB of program
 memory.
 
 @item __AVR_HAVE_EIJMP_EICALL__
-@item __AVR_3_BYTE_PC__
+@itemx __AVR_3_BYTE_PC__
 The device has the @code{EIJMP} and @code{EICALL} instructions.
 This is the case for devices with more than 128@tie{}KiB of program memory.
 This also means that the program counter
@@ -11750,13 +11750,13 @@ The program counter (PC) is 2@tie{}bytes wide. This is the case for devices
 with up to 128@tie{}KiB of program memory.
 
 @item __AVR_HAVE_8BIT_SP__
-@item __AVR_HAVE_16BIT_SP__
+@itemx __AVR_HAVE_16BIT_SP__
 The stack pointer (SP) register is treated as 8-bit respectively
 16-bit register by the compiler.
 The definition of these macros is affected by @code{-mtiny-stack}.
 
 @item __AVR_HAVE_SPH__
-@item __AVR_SP8__
+@itemx __AVR_SP8__
 The device has the SPH (high part of stack pointer) special function
 register or has an 8-bit stack pointer, respectively.
 The definition of these macros is affected by @code{-mmcu=} and
@@ -11764,9 +11764,9 @@ in the cases of @code{-mmcu=avr2} and @code{-mmcu=avr25} also
 by @code{-msp8}.
 
 @item __AVR_HAVE_RAMPD__
-@item __AVR_HAVE_RAMPX__
-@item __AVR_HAVE_RAMPY__
-@item __AVR_HAVE_RAMPZ__
+@itemx __AVR_HAVE_RAMPX__
+@itemx __AVR_HAVE_RAMPY__
+@itemx __AVR_HAVE_RAMPZ__
 The device has the @code{RAMPD}, @code{RAMPX}, @code{RAMPY},
 @code{RAMPZ} special function register, respectively.
 
@@ -11774,7 +11774,7 @@ The device has the @code{RAMPD}, @code{RAMPX}, @code{RAMPY},
 This macro reflects the @code{-mno-interrupts} command line option.
 
 @item __AVR_ERRATA_SKIP__
-@item __AVR_ERRATA_SKIP_JMP_CALL__
+@itemx __AVR_ERRATA_SKIP_JMP_CALL__
 Some AVR devices (AT90S8515, ATmega103) must not skip 32-bit
 instructions because of a hardware erratum.  Skip instructions are
 @code{SBRS}, @code{SBRC}, @code{SBIS}, @code{SBIC} and @code{CPSE}.
@@ -18457,7 +18457,7 @@ Mark the @code{MAC} register as call-clobbered, even if
 @option{-mhitachi} is given.
 
 @item -mieee
-@item -mno-ieee
+@itemx -mno-ieee
 @opindex mieee
 @opindex mnoieee
 Control the IEEE compliance of floating-point comparisons, which affects the
diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi
index dfbdc4c..bca0d8f 100644
--- a/gcc/doc/md.texi
+++ b/gcc/doc/md.texi
@@ -4483,8 +4483,8 @@ means of constraints requiring operands 1 and 0 to be the same location.
 @cindex @code{ior@var{m}3} instruction pattern
 @cindex @code{xor@var{m}3} instruction pattern
 @item @samp{ssadd@var{m}3}, @samp{usadd@var{m}3}
-@item @samp{sub@var{m}3}, @samp{sssub@var{m}3}, @samp{ussub@var{m}3}
-@item @samp{mul@var{m}3}, @samp{ssmul@var{m}3}, @samp{usmul@var{m}3}
+@itemx @samp{sub@var{m}3}, @samp{sssub@var{m}3}, @samp{ussub@var{m}3}
+@itemx @samp{mul@var{m}3}, @samp{ssmul@var{m}3}, @samp{usmul@var{m}3}
 @itemx @samp{div@var{m}3}, @samp{ssdiv@var{m}3}
 @itemx @samp{udiv@var{m}3}, @samp{usdiv@var{m}3}
 @itemx @samp{mod@var{m}3}, @samp{umod@var{m}3}
diff --git a/gcc/doc/sourcebuild.texi b/gcc/doc/sourcebuild.texi
index 89e7712..ec8263f 100644
--- a/gcc/doc/sourcebuild.texi
+++ b/gcc/doc/sourcebuild.texi
@@ -691,7 +691,7 @@ standard rule in @file{gcc/Makefile.in} to the variable
 @code{lang_checks}.
 
 @table @code
-@itemx all.cross
+@item all.cross
 @itemx start.encap
 @itemx rest.encap
 FIXME: exactly what goes in each of these targets?

-- 
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
"And now for something completely different."


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]