This is the mail archive of the mailing list for the GCC project.

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Building GCC 4.7.2 on Solaris 10 x86 AMD64 - Getting linker error involving eh_frame

Jim Rice wrote
> solaris-build# $PWD/../gcc-4.7.2/configure --prefix=/opt/gcc-4.7.2
> --with-gnu-as --with-as=/opt/csw/bin/gas \
>                --enable-languages=c,c++ CC='gcc -m64'

./configure -h lists out the following:

> `configure' configures this package to adapt to many kinds of systems.
> Usage: ../gcc-4.7.2/configure [OPTION]... [VAR=VALUE]...
> To assign environment variables (e.g., CC, CFLAGS...), specify them as
> VAR=VALUE.  See below for descriptions of some of the useful variables.
> Defaults for the options are specified in brackets.
> Configuration:
>   -h, --help              display this help and exit
>       --help=short        display options specific to this package
>       --help=recursive    display the short help of all the included
> packages
>   -V, --version           display version information and exit
>   -q, --quiet, --silent   do not print `checking...' messages
>       --cache-file=FILE   cache test results in FILE [disabled]
>   -C, --config-cache      alias for `--cache-file=config.cache'
>   -n, --no-create         do not create output files
>       --srcdir=DIR        find the sources in DIR [configure dir or `..']
> Installation directories:
>   --prefix=PREFIX         install architecture-independent files in PREFIX
>                           [/usr/local]
>   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
>                           [PREFIX]
> By default, `make install' will install all the files in
> `/usr/local/bin', `/usr/local/lib' etc.  You can specify
> an installation prefix other than `/usr/local' using `--prefix',
> for instance `--prefix=$HOME'.
> For better control, use the options below.
> Fine tuning of the installation directories:
>   --bindir=DIR            user executables [EPREFIX/bin]
>   --sbindir=DIR           system admin executables [EPREFIX/sbin]
>   --libexecdir=DIR        program executables [EPREFIX/libexec]
>   --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
>   --sharedstatedir=DIR    modifiable architecture-independent data
> [PREFIX/com]
>   --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
>   --libdir=DIR            object code libraries [EPREFIX/lib]
>   --includedir=DIR        C header files [PREFIX/include]
>   --oldincludedir=DIR     C header files for non-gcc [/usr/include]
>   --datarootdir=DIR       read-only arch.-independent data root
> [PREFIX/share]
>   --datadir=DIR           read-only architecture-independent data
>   --infodir=DIR           info documentation [DATAROOTDIR/info]
>   --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
>   --mandir=DIR            man documentation [DATAROOTDIR/man]
>   --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
>   --htmldir=DIR           html documentation [DOCDIR]
>   --dvidir=DIR            dvi documentation [DOCDIR]
>   --pdfdir=DIR            pdf documentation [DOCDIR]
>   --psdir=DIR             ps documentation [DOCDIR]
> Program names:
>   --program-prefix=PREFIX            prepend PREFIX to installed program
> names
>   --program-suffix=SUFFIX            append SUFFIX to installed program
> names
>   --program-transform-name=PROGRAM   run sed PROGRAM on installed program
> names
> System types:
>   --build=BUILD     configure for building on BUILD [guessed]
>   --host=HOST       cross-compile to build programs to run on HOST [BUILD]
>   --target=TARGET   configure for building compilers for TARGET [HOST]
> Optional Features:
>   --disable-option-checking  ignore unrecognized --enable/--with options
>   --disable-FEATURE       do not include FEATURE (same as
> --enable-FEATURE=no)
>   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
>   --enable-gold[=ARG]     build gold [ARG={default,yes,no}]
>   --enable-ld[=ARG]       build ld [ARG={default,yes,no}]
>   --disable-libquadmath   do not build libquadmath directory
>   --disable-libquadmath-support
>                           disable libquadmath support for Fortran
>   --enable-libada         build libada directory
>   --enable-libssp         build libssp directory
>   --enable-static-libjava[=ARG]
>                           build static libjava [default=no]
>   --enable-bootstrap      enable bootstrapping [yes if native build]
>   --enable-build-with-cxx build with C++ compiler instead of C compiler
>   --enable-build-poststage1-with-cxx
>                           build stages 2 and 3 with C++, not C
>   --disable-ppl-version-check
>                           disable check for PPL version
>   --enable-cloog-backend[=BACKEND]
>                           set the CLooG BACKEND used to either isl, ppl or
>                           ppl-legacy (default)
>   --disable-cloog-version-check
>                           disable check for CLooG version
>   --enable-lto            enable link time optimization support
>   --enable-stage1-languages[=all]
>                           choose additional languages to build during
> stage1.
>                           Mostly useful for compiler development
>   --enable-objc-gc        enable use of Boehm's garbage collector with the
>                           Objective-C runtime
>   --enable-serial-[{host,target,build}-]configure
>                           force sequential configuration of sub-packages
> for
>                           the host, target or build machine, or all
>                           sub-packages
>   --enable-maintainer-mode
>                           enable make rules and dependencies not useful
> (and
>                           sometimes confusing) to the casual installer
>   --enable-stage1-checking[=all]
>                           choose additional checking for stage1 of the
>                           compiler
>   --enable-werror         enable -Werror in bootstrap stage2 and later
> Optional Packages:
>   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
>   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
>   --with-build-libsubdir=DIR  Directory where to find libraries for build
> system
>   --with-mpc=PATH         specify prefix directory for installed MPC
> package.
>                           Equivalent to --with-mpc-include=PATH/include
> plus
>                           --with-mpc-lib=PATH/lib
>   --with-mpc-include=PATH specify directory for installed MPC include
> files
>   --with-mpc-lib=PATH     specify directory for the installed MPC library
>   --with-mpfr-dir=PATH    this option has been REMOVED
>   --with-mpfr=PATH        specify prefix directory for installed MPFR
> package.
>                           Equivalent to --with-mpfr-include=PATH/include
> plus
>                           --with-mpfr-lib=PATH/lib
>   --with-mpfr-include=PATH
>                           specify directory for installed MPFR include
> files
>   --with-mpfr-lib=PATH    specify directory for the installed MPFR library
>   --with-gmp-dir=PATH     this option has been REMOVED
>   --with-gmp=PATH         specify prefix directory for the installed GMP
>                           package. Equivalent to
>                           --with-gmp-include=PATH/include plus
>                           --with-gmp-lib=PATH/lib
>   --with-gmp-include=PATH specify directory for installed GMP include
> files
>   --with-gmp-lib=PATH     specify directory for the installed GMP library
>   --with-host-libstdcxx=L use linker arguments L to link with libstdc++
> when
>                           linking with PPL
>   --with-stage1-ldflags=FLAGS
>                           linker flags for stage1
>   --with-stage1-libs=LIBS libraries for stage1
>   --with-boot-libs=LIBS   libraries for stage2 and later
>   --with-boot-ldflags=FLAGS
>                           linker flags for stage2 and later
>   --with-ppl=PATH         specify prefix directory for the installed PPL
>                           package. Equivalent to
>                           --with-ppl-include=PATH/include plus
>                           --with-ppl-lib=PATH/lib
>   --with-ppl-include=PATH specify directory for installed PPL include
> files
>   --with-ppl-lib=PATH     specify directory for the installed PPL library
>   --with-cloog=PATH       Specify prefix directory for the installed
>                           package. Equivalent to
>                           --with-cloog-include=PATH/include plus
>                           --with-cloog-lib=PATH/lib
>   --with-cloog-include=PATH
>                           Specify directory for installed CLooG include
> files
>   --with-cloog-lib=PATH   Specify the directory for the installed CLooG
>                           library
>   --with-build-sysroot=SYSROOT
>                           use sysroot as the system root during the build
>   --with-debug-prefix-map='A=B C=D ...'
>                           map A to B, C to D ... in debug information
>   --with-build-config='NAME NAME2...'
>                           use config/ build configuration
>   --with-build-time-tools=PATH
>                           use given path to find target tools during the
> build
> Some influential environment variables:
>   CC          C compiler command
>   CFLAGS      C compiler flags
>   LDFLAGS     linker flags, e.g. -L
> <lib dir>
>  if you have libraries in a
>               nonstandard directory 
> <lib dir>
>   LIBS        libraries to pass to the linker, e.g. -l
> <library>
>   CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I
> <include dir>
>  if
>               you have headers in a nonstandard directory 
> <include dir>
>   CXX         C++ compiler command
>   CXXFLAGS    C++ compiler flags
>   build_configargs
>               additional configure arguments for build directories
>   host_configargs
>               additional configure arguments for host directories
>   target_configargs
>               additional configure arguments for target directories
>   AR          AR for the host
>   AS          AS for the host
>   DLLTOOL     DLLTOOL for the host
>   LD          LD for the host
>   LIPO        LIPO for the host
>   NM          NM for the host
>   RANLIB      RANLIB for the host
>   STRIP       STRIP for the host
>   WINDRES     WINDRES for the host
>   WINDMC      WINDMC for the host
>   OBJCOPY     OBJCOPY for the host
>   OBJDUMP     OBJDUMP for the host
>   READELF     READELF for the host
>               CC for the target
>               CXX for the target
>               GCC for the target
>               GCJ for the target
>               GFORTRAN for the target
>               GOC for the target
>               AR for the target
>               AS for the target
>               DLLTOOL for the target
>               LD for the target
>               LIPO for the target
>               NM for the target
>               OBJDUMP for the target
>               RANLIB for the target
>               READELF for the target
>               STRIP for the target
>               WINDRES for the target
>               WINDMC for the target
> Use these variables to override the choices made by `configure' or to help
> it to find libraries and programs with nonstandard names/locations.
> Report bugs to the package provider.

But here I can't find neither *--with-gnu-as* nor *--with-as* switches.
However I have been able to compile gcc 4.7.2 on Solaris 10. The success
story is here:

View this message in context:
Sent from the gcc - Help mailing list archive at

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]